- Title
- Analysis of maximum power point tracking data for obtaining photovoltaic parameters
- Creator
- Chitura, Anesu Godfrey
- Subject
- Photovoltaic power system
- Date Issued
- 2020
- Date
- 2020
- Type
- Thesis
- Type
- Masters
- Type
- MSc
- Identifier
- http://hdl.handle.net/10353/18576
- Identifier
- vital:42610
- Description
- As a standard, photovoltaic (PV) modules are rated by the use of standard test conditions (STC). Such details entail current and voltage (I-V) measurements for modules under an irradiance of 1000 W/m2 an air mass ration of 1.5 global spectrum and 25˚C cell temperature. Outdoor weather conditions continuously vary with time and from one location to the other. This further offset the expected operational power outputs as outdoor conditions are generally characterized by high cell temperatures. The technology one uses will also complicate the power output prediction since different module technologies respond to these outdoor conditions differently. I-V tracers are able to measure the full I-V curve of the module thus can give the operational PV parameters at any given time. However, these tracers are sold at exorbitant prices and they require skilled personnel in order to operate them. Most if not all tracers require isolation of the module under test thereby disrupting the power production function of the module._________________________________________________________________________________________________________________________________________ In this study a method to obtain photovoltaic (PV) parameters using the maximum power point tracking (MPPT) data is presented and tested under natural outdoor conditions. The method features a customized data acquisition system (DAS) designed for the measurement and storage of meteorological and MPPT data. The DAS is capable of extracting parameters from any combination of modules with an open circuit voltage 〖(V〗_oc) less than or equal to 120 Volts and a short circuit current 〖(I〗_sc) of 100 Amps. The system used is capable of extracting MPPT data using a reliable, improved storage and a programmable data logger. In order to match the sampling operational speeds of internal charge controller switches a computer interfaced Peripheral Component Interconnect (PCI) card was also used. Data collection and characterization of the MPPT data was done in such a way that the power generation process remained uninterrupted throughout the whole process. The regression nonlinear least squares method was used to fit MPPT crests and obtain the knee part of the I-V curve. This was then extrapolated to obtain the full I-V curve, which then produces the operational PV parameters. The resultant parameters from the characterization process were logged and accessible at any time. The end result was a method that can be incorporated within a charge controller for quick, hands-free PV parameter extraction, using only the MPPT scanned data.
- Format
- 130 leaves
- Format
- Publisher
- University of Fort Hare
- Publisher
- Faculty of Science and Agriculture
- Language
- English
- Rights
- University of Fort Hare
- Hits: 720
- Visitors: 755
- Downloads: 62
Collections
UFH Department of Physics
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | SOURCE1 | AG Chitura, MSc Dissertation.pdf | 2 MB | Adobe Acrobat PDF | View Details Download |