A framework for the corporate governance of ICT in local government
- Delport, Petrus Marthinus Jacobus
- Authors: Delport, Petrus Marthinus Jacobus
- Date: 2017
- Subjects: Information technology
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/7015 , vital:21191
- Description: Information and Communication Technology (ICT) has become critical and pervasive in any well-run modern enterprise across all sectors, which include local government. As a result, ICT demands to be managed and governed in a sustainable manner. Therefore, local government should accept the responsibility of implementing good Corporate Governance of ICT (CGICT). Without sound CGICT, ICT is unable to support local government in the achievement of their strategic objectives. This will most likely result in local government not being able to serve the interests of the community. Even though local government is aware of their responsibility regarding CGICT, the Auditor-General reports that their attempts are unsatisfactory, in this regard. This is most probably due to the fact that ample information exists on guiding local government with `what' they should do towards good CGICT, but unfortunately a lack of guidance on `how' to achieve it. Thus, it is imperative for local government to adopt a CGICT framework which provides guidance not only on what they must do towards implementing good CGICT but also on how they should achieve it. In doing so, local government would most likely be able to properly manage and govern ICT and support the needs of the community. Therefore, the aim of this study is to report on research undertaken, in order to assist local government with a CGICT framework that is relevant to their unique environment. Accordingly, this CGICT framework aims to be usable and scallable to the needs of any sized local government entity. As a result, the CGICT framework aims to be simplistic in nature to promote self-implementation of sound CGICT in local government.
- Full Text:
- Date Issued: 2017
- Authors: Delport, Petrus Marthinus Jacobus
- Date: 2017
- Subjects: Information technology
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/7015 , vital:21191
- Description: Information and Communication Technology (ICT) has become critical and pervasive in any well-run modern enterprise across all sectors, which include local government. As a result, ICT demands to be managed and governed in a sustainable manner. Therefore, local government should accept the responsibility of implementing good Corporate Governance of ICT (CGICT). Without sound CGICT, ICT is unable to support local government in the achievement of their strategic objectives. This will most likely result in local government not being able to serve the interests of the community. Even though local government is aware of their responsibility regarding CGICT, the Auditor-General reports that their attempts are unsatisfactory, in this regard. This is most probably due to the fact that ample information exists on guiding local government with `what' they should do towards good CGICT, but unfortunately a lack of guidance on `how' to achieve it. Thus, it is imperative for local government to adopt a CGICT framework which provides guidance not only on what they must do towards implementing good CGICT but also on how they should achieve it. In doing so, local government would most likely be able to properly manage and govern ICT and support the needs of the community. Therefore, the aim of this study is to report on research undertaken, in order to assist local government with a CGICT framework that is relevant to their unique environment. Accordingly, this CGICT framework aims to be usable and scallable to the needs of any sized local government entity. As a result, the CGICT framework aims to be simplistic in nature to promote self-implementation of sound CGICT in local government.
- Full Text:
- Date Issued: 2017
A model for assessing and reporting network performance measurement in SANReN
- Authors: Draai, Kevin
- Date: 2017
- Subjects: Computer networks -- Evaluation Network performance (Telecommunication) , Computer networks -- Management
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/16131 , vital:28326
- Description: The performance measurement of a service provider network is an important activity. It is required for the smooth operation of the network as well as for reporting and planning. SANReN is a service provider tasked with serving the research and education network of South Africa. It currently has no structure or process for determining network performance metrics to measure the performance of its network. The objective of this study is to determine, through a process or structure, which metrics are best suited to the SANReN environment. This study is conducted in 3 phases in order to discover and verify the solution to this problem. The phases are "Contextualisation", "Design",and "Verification". The "Contextualisation" phase includes the literature review. This provides the context for the problem area but also serves as a search function for the solution. This study adopts the design science research paradigm which requires the creation of an artefact. The "Design" phase involves the creation of the conceptual network performance measurement model. This is the artefact and a generalised model for determining the network performance metrics for an NREN. To prove the utility of the model it is implemented in the SANReN environment. This is done in the "Verification" phase. The network performance measurement model proposes a process to determine network performance metrics. This process includes getting NREN requirements and goals, defining the NRENs network design goals through these requirements, define network performance metrics from these goals, evaluating the NRENs monitoring capability, and measuring what is possible. This model provides a starting point for NRENs to determine network performance metrics tailored to its environment. This is done in the SANReN environment as a proof of concept. The utility of the model is shown through the implementation in the SANReN environment thus it can be said that it is generic.The tools that monitor the performance of the SANReN network are used to retrieve network performance data from. Through understanding the requirements, determining network design goals and performance metrics, and determining the gap the retrieving of results took place. These results are analysed and finally aggregated to provide information that feeds into SANReN reporting and planning processes. A template is provided to do the aggregation of metric results. This template provides the structure to enable metrics results aggregation but leaves the categories or labels for the reporting and planning sections blank. These categories are specific to each NREN. At this point SANReN has the aggregated information to use for planning and reporting. The model is verified and thus the study’s main research objective is satisfied.
- Full Text:
- Date Issued: 2017
- Authors: Draai, Kevin
- Date: 2017
- Subjects: Computer networks -- Evaluation Network performance (Telecommunication) , Computer networks -- Management
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/16131 , vital:28326
- Description: The performance measurement of a service provider network is an important activity. It is required for the smooth operation of the network as well as for reporting and planning. SANReN is a service provider tasked with serving the research and education network of South Africa. It currently has no structure or process for determining network performance metrics to measure the performance of its network. The objective of this study is to determine, through a process or structure, which metrics are best suited to the SANReN environment. This study is conducted in 3 phases in order to discover and verify the solution to this problem. The phases are "Contextualisation", "Design",and "Verification". The "Contextualisation" phase includes the literature review. This provides the context for the problem area but also serves as a search function for the solution. This study adopts the design science research paradigm which requires the creation of an artefact. The "Design" phase involves the creation of the conceptual network performance measurement model. This is the artefact and a generalised model for determining the network performance metrics for an NREN. To prove the utility of the model it is implemented in the SANReN environment. This is done in the "Verification" phase. The network performance measurement model proposes a process to determine network performance metrics. This process includes getting NREN requirements and goals, defining the NRENs network design goals through these requirements, define network performance metrics from these goals, evaluating the NRENs monitoring capability, and measuring what is possible. This model provides a starting point for NRENs to determine network performance metrics tailored to its environment. This is done in the SANReN environment as a proof of concept. The utility of the model is shown through the implementation in the SANReN environment thus it can be said that it is generic.The tools that monitor the performance of the SANReN network are used to retrieve network performance data from. Through understanding the requirements, determining network design goals and performance metrics, and determining the gap the retrieving of results took place. These results are analysed and finally aggregated to provide information that feeds into SANReN reporting and planning processes. A template is provided to do the aggregation of metric results. This template provides the structure to enable metrics results aggregation but leaves the categories or labels for the reporting and planning sections blank. These categories are specific to each NREN. At this point SANReN has the aggregated information to use for planning and reporting. The model is verified and thus the study’s main research objective is satisfied.
- Full Text:
- Date Issued: 2017
A model to address factors that could influence the information security behaviour of computing graduates
- Mabece, Thandolwethu, Thomson, Kerry-Lynn
- Authors: Mabece, Thandolwethu , Thomson, Kerry-Lynn
- Date: 2017
- Subjects: Information technology -- Security measures , Computer security , Cyber intelligence (Computer security)
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/7355 , vital:21339
- Description: The fact that information is ubiquitous throughout most modern organisations cannot be denied. Information is not merely used as an enabler in modern organisations today, but is also used to gain a competitive advantage over competitors. Thus, information has become one of the most important business assets. It is, therefore, imperative that organisations protect information assets as they would protect other business assets. This is typically achieved through implementing various security measures.Technological and procedural security measures are largely dependent on humans. However, the incorrect behaviour of humans poses a significant threat to the protection of these information assets. Thus, it is vital to understand how human behaviour may impact the protection of information assets. While the focus of much literature is on organisations, the focus of this research is on higher education institutions and the factors of information security, with a specific focus on influencing the information security behaviour of computing graduates. Typically, computing graduates would be employed in organisations in various careers such as software developers, network administrators, database administrators and information systems analysts. Employment in these careers means that they would be closely interacting with information assets and information systems. A real problem, as identified by this research, is that currently, many higher education institutions are not consciously doing enough to positively influence the information security behaviour of their computing graduates. This research presents a model to address various factors that could influence the information security behaviour of computing graduates. The aim of this model is to assist computing educators in influencing computing graduates to adopt more secure behaviour, such as security assurance behaviour. A literature review was conducted to identify the research problem. A number of theories such as the Theory of Planned Behaviour, Protection Motivation Theory and Social Cognitive Theory were identified as being relevant for this research as they provided a theoretical foundation for factors that could influence the information security behaviour of computing graduates. Additionally, a survey was conducted to gather the opinions and perceptions of computing educators relating to information security education in higher education institutions. Results indicated that information security is not pervasively integrated within the higher education institutions surveyed. Furthermore, results revealed that most computing students were perceived to not be behaving in a secure manner with regard to information security. This could negatively influence their information security behaviour as computing graduates employed within organisations. Computing educators therefore require assistance in influencing the information security behaviour of these computing students. The proposed model to provide this assistance was developed through argumentation and modelling.
- Full Text:
- Date Issued: 2017
- Authors: Mabece, Thandolwethu , Thomson, Kerry-Lynn
- Date: 2017
- Subjects: Information technology -- Security measures , Computer security , Cyber intelligence (Computer security)
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/7355 , vital:21339
- Description: The fact that information is ubiquitous throughout most modern organisations cannot be denied. Information is not merely used as an enabler in modern organisations today, but is also used to gain a competitive advantage over competitors. Thus, information has become one of the most important business assets. It is, therefore, imperative that organisations protect information assets as they would protect other business assets. This is typically achieved through implementing various security measures.Technological and procedural security measures are largely dependent on humans. However, the incorrect behaviour of humans poses a significant threat to the protection of these information assets. Thus, it is vital to understand how human behaviour may impact the protection of information assets. While the focus of much literature is on organisations, the focus of this research is on higher education institutions and the factors of information security, with a specific focus on influencing the information security behaviour of computing graduates. Typically, computing graduates would be employed in organisations in various careers such as software developers, network administrators, database administrators and information systems analysts. Employment in these careers means that they would be closely interacting with information assets and information systems. A real problem, as identified by this research, is that currently, many higher education institutions are not consciously doing enough to positively influence the information security behaviour of their computing graduates. This research presents a model to address various factors that could influence the information security behaviour of computing graduates. The aim of this model is to assist computing educators in influencing computing graduates to adopt more secure behaviour, such as security assurance behaviour. A literature review was conducted to identify the research problem. A number of theories such as the Theory of Planned Behaviour, Protection Motivation Theory and Social Cognitive Theory were identified as being relevant for this research as they provided a theoretical foundation for factors that could influence the information security behaviour of computing graduates. Additionally, a survey was conducted to gather the opinions and perceptions of computing educators relating to information security education in higher education institutions. Results indicated that information security is not pervasively integrated within the higher education institutions surveyed. Furthermore, results revealed that most computing students were perceived to not be behaving in a secure manner with regard to information security. This could negatively influence their information security behaviour as computing graduates employed within organisations. Computing educators therefore require assistance in influencing the information security behaviour of these computing students. The proposed model to provide this assistance was developed through argumentation and modelling.
- Full Text:
- Date Issued: 2017
A profile of selected enterprises and their adopted cost allocation systems in Nelson Mandela Bay
- Authors: Vellem, Masixole
- Date: 2017
- Subjects: Cost accounting , Budget Business enterprises
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/13568 , vital:27239
- Description: Activity-based costing is a cost allocation method which appears to have many benefits when compared to traditional costing systems. However, there is limited academic research demonstrating this superiority. There is thus a need to investigate and profile the characteristics of selected enterprises and their adopted cost allocation systems. The main objective of this study was to profile and compare the characteristics of companies in Nelson Mandela Bay that use the activity-based costing system, versus those using traditional costing methods. The research methodology used for this research study is descriptive and quantitative, using various techniques for data analysis. An electronic internet based questionnaire was distributed to companies and the response automatically recorded for analysis with the help of Nelson Mandela University statistics department. The findings of the empirical study revealed that most (38%) of the respondents use a combination of both activity-based costing and traditional costing methods, followed by traditional costing methods (35%), and purely activity-based costing (27%). Data analysis revealed that companies in construction and manufacturing seemed to prefer activity-based costing over traditional costing methods. The findings raise the question as to whether the preference in cost allocation methods is based solely on the benefits of cost allocation, lack of new knowledge, adaptability within companies, or cost of change versus the benefit.
- Full Text:
- Date Issued: 2017
- Authors: Vellem, Masixole
- Date: 2017
- Subjects: Cost accounting , Budget Business enterprises
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/13568 , vital:27239
- Description: Activity-based costing is a cost allocation method which appears to have many benefits when compared to traditional costing systems. However, there is limited academic research demonstrating this superiority. There is thus a need to investigate and profile the characteristics of selected enterprises and their adopted cost allocation systems. The main objective of this study was to profile and compare the characteristics of companies in Nelson Mandela Bay that use the activity-based costing system, versus those using traditional costing methods. The research methodology used for this research study is descriptive and quantitative, using various techniques for data analysis. An electronic internet based questionnaire was distributed to companies and the response automatically recorded for analysis with the help of Nelson Mandela University statistics department. The findings of the empirical study revealed that most (38%) of the respondents use a combination of both activity-based costing and traditional costing methods, followed by traditional costing methods (35%), and purely activity-based costing (27%). Data analysis revealed that companies in construction and manufacturing seemed to prefer activity-based costing over traditional costing methods. The findings raise the question as to whether the preference in cost allocation methods is based solely on the benefits of cost allocation, lack of new knowledge, adaptability within companies, or cost of change versus the benefit.
- Full Text:
- Date Issued: 2017
A scenario-based ICT risk assessment approach in local government
- Authors: Mcube, Unathi Unity
- Date: 2017
- Subjects: Internet in public administration -- South Africa , Electronic commerce -- Government policy Municipal services -- South Africa
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/7598 , vital:21942
- Description: Information Communication Technology (ICT) has become an integral part of conducting business within enterprises including the local government. Local government relies on the use of ICT to ensure that its objectives and goals are accomplished. The effective use of ICT within the context of local government is fundamental for the support, sustainability and growth of municipalities. Benefits associated with the effective use of ICT in local government include but are not limited to accelerated service delivery, efficiency and accountability. While these benefits cannot be disputed, it is important to realise that the use of ICT presents potential risks. Thus, good governance of ICT should be addressed in local government. However, in recent years, the Auditor-General of South Africa (AG) has identified lack of good governance of ICT in local government. Various issues have been identified as emanating from the lack of good governance of ICT and lack of adequate ICT risk assessment is a case in point. In an attempt to address the good governance of ICT local government, various documents have been formulated. However, none of these address how effective management of ICT risks can be achieved. As such, local government lacks the means to effectively address the management of ICT risk which is core to the good governance of ICT. Local government still requires urgent intervention with regard to addressing the activities of managing ICT risks, particularly ICT risk assessment. Moreover, it was revealed that the lack of adequate ICT skills and financial resources in local government elevates this problem. The above-mentioned problem is what has motivated this research study. This dissertation aims to produce an artefact in the form of an approach for ICT risk assessment in local government. It is believed that a customised approach to ICT risk assessment in local government will contribute towards solving the identified problem.
- Full Text:
- Date Issued: 2017
- Authors: Mcube, Unathi Unity
- Date: 2017
- Subjects: Internet in public administration -- South Africa , Electronic commerce -- Government policy Municipal services -- South Africa
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/7598 , vital:21942
- Description: Information Communication Technology (ICT) has become an integral part of conducting business within enterprises including the local government. Local government relies on the use of ICT to ensure that its objectives and goals are accomplished. The effective use of ICT within the context of local government is fundamental for the support, sustainability and growth of municipalities. Benefits associated with the effective use of ICT in local government include but are not limited to accelerated service delivery, efficiency and accountability. While these benefits cannot be disputed, it is important to realise that the use of ICT presents potential risks. Thus, good governance of ICT should be addressed in local government. However, in recent years, the Auditor-General of South Africa (AG) has identified lack of good governance of ICT in local government. Various issues have been identified as emanating from the lack of good governance of ICT and lack of adequate ICT risk assessment is a case in point. In an attempt to address the good governance of ICT local government, various documents have been formulated. However, none of these address how effective management of ICT risks can be achieved. As such, local government lacks the means to effectively address the management of ICT risk which is core to the good governance of ICT. Local government still requires urgent intervention with regard to addressing the activities of managing ICT risks, particularly ICT risk assessment. Moreover, it was revealed that the lack of adequate ICT skills and financial resources in local government elevates this problem. The above-mentioned problem is what has motivated this research study. This dissertation aims to produce an artefact in the form of an approach for ICT risk assessment in local government. It is believed that a customised approach to ICT risk assessment in local government will contribute towards solving the identified problem.
- Full Text:
- Date Issued: 2017
A study of procurement and administration in the Department of Health in the Eastern Cape
- Authors: Xatula, Meyisi Sigqibo
- Date: 2017
- Subjects: Government purchasing -- South Africa -- Eastern Cape , Public administration -- South Africa -- Eastern Cape Management -- Procurement
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/13458 , vital:27205
- Description: The study investigated issues concerning procurement and administration in the Department of Health (DoH) in the Eastern Cape and has further investigated the role of the implementation of the Public Finance Management Act (PFMA), Act 1 of 1999 in the department. That included issues associated with the administration and procurement in relation to service providers from the private sector. The DoH in the Eastern Cape Province delivers:“ … a quality health service to the people of the Eastern Cape Province promoting a better life for all and ensures accessible, comprehensive, and integrated services in the province, emphasising the primary health care approach, as well as utilising and developing all resources to enable present and future generations to enjoy good health and quality of life” (Department of Health [DoH], Eastern Cape, Departmental Annual Performance Plan, 2013:3). Various researchers have investigated the implementation of the PFM Act 1 of 1999 and have identified gaps and made recommendations regarding the identified gaps. The study is based on the following reports from various authors: According to Pillay (2013), since 1994 every public sector department has lost approximately R385 billion to fraud, corruption and maladministration. Government employees have accepted kickbacks in exchange for rigging tenders, including focusing on high levels of corruption (Albert, 2011:1). The fraud and corruption in the Eastern Cape DoH, which involves nepotism, corruption and fraud amounting to a million rand in the audit report of 2013, have prompted calls by the opposition for interventions (PricewaterhouseCoopers [PWC], 2013:9). Departmental Annual Performance Plan for 2013/2014. Impact of accountability and ethics on public service delivery: a South African perspective which involves accountability stating that all government departments have to be efficient to ensure value for public funds including the qualitative and value-laden expectations of the society (Raga & Taylor, 2008:1). EC (2010:9), Audit Report: Health Department, Eastern Cape. King III Report (2009) – Corporate Governance. The study has built on previous research conducted by other researchers who have conducted research on the issue of the implementation of the Public Finance Management Act 1 (PFM Act 1) of 1999, and had identify further gaps not previously identified by other researchers or in the audits. In addition, this study aims to also identify shortcomings that have been described in the recent audits 2013/2014 of the DoH, Eastern Cape. Together with the new gaps identified in the PFM Act 1 of 1999, the researcher aims to make a number of recommendations to improve the effectiveness of the implementation of the PFM Act 1 of 1999. The PFM Act 1 of 1999 was promulgated by the South African government in 1999. The Act promotes the objective of good financial management in order to maximise service delivery through effective and efficient use of available limited resources as well as credible interaction with private sector service providers. A key objective of this Act is to put in place a more effective financial accountability system over public entities. The objectives of the Act are to: Modernise the system of financial management, Enable public sector managers to manage, while at the same time being accountable, Ensure timely provision of quality information, To eliminate waste and corruption in the use of public assets.
- Full Text:
- Date Issued: 2017
- Authors: Xatula, Meyisi Sigqibo
- Date: 2017
- Subjects: Government purchasing -- South Africa -- Eastern Cape , Public administration -- South Africa -- Eastern Cape Management -- Procurement
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/13458 , vital:27205
- Description: The study investigated issues concerning procurement and administration in the Department of Health (DoH) in the Eastern Cape and has further investigated the role of the implementation of the Public Finance Management Act (PFMA), Act 1 of 1999 in the department. That included issues associated with the administration and procurement in relation to service providers from the private sector. The DoH in the Eastern Cape Province delivers:“ … a quality health service to the people of the Eastern Cape Province promoting a better life for all and ensures accessible, comprehensive, and integrated services in the province, emphasising the primary health care approach, as well as utilising and developing all resources to enable present and future generations to enjoy good health and quality of life” (Department of Health [DoH], Eastern Cape, Departmental Annual Performance Plan, 2013:3). Various researchers have investigated the implementation of the PFM Act 1 of 1999 and have identified gaps and made recommendations regarding the identified gaps. The study is based on the following reports from various authors: According to Pillay (2013), since 1994 every public sector department has lost approximately R385 billion to fraud, corruption and maladministration. Government employees have accepted kickbacks in exchange for rigging tenders, including focusing on high levels of corruption (Albert, 2011:1). The fraud and corruption in the Eastern Cape DoH, which involves nepotism, corruption and fraud amounting to a million rand in the audit report of 2013, have prompted calls by the opposition for interventions (PricewaterhouseCoopers [PWC], 2013:9). Departmental Annual Performance Plan for 2013/2014. Impact of accountability and ethics on public service delivery: a South African perspective which involves accountability stating that all government departments have to be efficient to ensure value for public funds including the qualitative and value-laden expectations of the society (Raga & Taylor, 2008:1). EC (2010:9), Audit Report: Health Department, Eastern Cape. King III Report (2009) – Corporate Governance. The study has built on previous research conducted by other researchers who have conducted research on the issue of the implementation of the Public Finance Management Act 1 (PFM Act 1) of 1999, and had identify further gaps not previously identified by other researchers or in the audits. In addition, this study aims to also identify shortcomings that have been described in the recent audits 2013/2014 of the DoH, Eastern Cape. Together with the new gaps identified in the PFM Act 1 of 1999, the researcher aims to make a number of recommendations to improve the effectiveness of the implementation of the PFM Act 1 of 1999. The PFM Act 1 of 1999 was promulgated by the South African government in 1999. The Act promotes the objective of good financial management in order to maximise service delivery through effective and efficient use of available limited resources as well as credible interaction with private sector service providers. A key objective of this Act is to put in place a more effective financial accountability system over public entities. The objectives of the Act are to: Modernise the system of financial management, Enable public sector managers to manage, while at the same time being accountable, Ensure timely provision of quality information, To eliminate waste and corruption in the use of public assets.
- Full Text:
- Date Issued: 2017
Analysis of factors affecting performance of a low-temperature Organic Rankine Cycle heat engine
- Authors: Kalua, Tisaye Bertram
- Date: 2017
- Subjects: Rankine cycle Heat engineering , Cogeneration of electric power and heat
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/17844 , vital:28460
- Description: Organic Rankine Cycle (ORC) heat engines convert low-grade heat to other forms of energy such as electrical and mechanical energy. They achieve this by vaporizing and expanding the organic fluid at high pressure, turning the turbine which can be employed to run an alternator or any other mechanism as desired. Conventional Rankine Cycles operate with steam at temperatures above 400 ℃. The broad aspect of the research focussed on the generation of electricity to cater for household needs. Solar energy would be used to heat air which would in turn heat rocks in an insulated vessel. This would act as an energy storage in form of heat from which a heat transfer fluid would collect heat to supply the ORC heat engine for the generation of electricity. The objective of the research was to optimize power output of the ORC heat engine operating at temperatures between 25℃ at the condenser and 90 to 150℃ at the heat source. This was achieved by analysis of thermal energy, mechanical power, electrical power and physical parameters in connection with flow rate of working fluid and heat transfer fluids.
- Full Text:
- Date Issued: 2017
- Authors: Kalua, Tisaye Bertram
- Date: 2017
- Subjects: Rankine cycle Heat engineering , Cogeneration of electric power and heat
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/17844 , vital:28460
- Description: Organic Rankine Cycle (ORC) heat engines convert low-grade heat to other forms of energy such as electrical and mechanical energy. They achieve this by vaporizing and expanding the organic fluid at high pressure, turning the turbine which can be employed to run an alternator or any other mechanism as desired. Conventional Rankine Cycles operate with steam at temperatures above 400 ℃. The broad aspect of the research focussed on the generation of electricity to cater for household needs. Solar energy would be used to heat air which would in turn heat rocks in an insulated vessel. This would act as an energy storage in form of heat from which a heat transfer fluid would collect heat to supply the ORC heat engine for the generation of electricity. The objective of the research was to optimize power output of the ORC heat engine operating at temperatures between 25℃ at the condenser and 90 to 150℃ at the heat source. This was achieved by analysis of thermal energy, mechanical power, electrical power and physical parameters in connection with flow rate of working fluid and heat transfer fluids.
- Full Text:
- Date Issued: 2017
Analysis of the reliability for the 132/66/22 KV distribution network within ESKOM’s Eastern Cape operating unit
- Authors: Pantshwa, Athini
- Date: 2017
- Subjects: Electric power distribution Electricity -- Supply -- Engineering , Smart power grids
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/19750 , vital:28953
- Description: A stable and reliable electrical power supply system is an inevitable pre-requisite for the technological and economic growth of any nation. Due to this, utilities must strive and ensure that the customer’s reliability requirements are met and that the regulators requirements are satisfied at the lowest possible cost. It is known fact around the world that 90% of the customer service interruptions are caused due to failure in distribution system. Therefore, it is worth considering reliability assessments as it provides an opportunity to incorporate the cost or losses incurred by the utilities customer as a result of power failure. This must be considered in the planning and operating practices. The system modelling and simulation study is carried out on one of the district’s distribution system which consists of 132 kV, 66 kV and 22 kV network in Aliwal North Sector ECOU. The reliability assessment is done on the 22, 66 and 132 kV system to assess the performance of the present system and also predictive reliability analysis for the future system considering load growth and system expansion. The alternative which gives low SAIDI, SAIFI and minimum breakeven costs is being assessed and considered. The reliability of 132 kV system could be further improved by constructing a new 132 kV line from a different source of supply and connecting with line coming from another district (reserve) at reasonable break even cost. The decision base could be further improved by having Aliwal North Sector context interruption cost. However, the historical data which may be used in Aliwal North Sector to acquire interruption costs from the customers are being proposed. The focus should be on improving the power quality on constrained networks first, then the reliability. Therefore for the Aliwal North power system network it is imperative that Eskom invest on the reliability of this network. This dissertation also analysed load reflected economic benefit versus performance expectations that should be optimized through achieving a balance between network performance (SAIDI) improvement, and total life cycle cost (to Eskom as well as the economy). Reliability analysis conducted in this dissertation used Aliwal North power system network as a case study; the results proved that the system is vulnerable to faults, planned and unplanned outages. Reliability evaluation studies were conducted on the system using DigSilent software in conjunction with FME. These two models gave accurate results with acceptable variance in most indices except for the ENS where the variance was quite significant. It can be concluded that DigSilent results are the most accurate results in all three reliability evaluation scenarios for the Aliwal North Power System, best interpretation being that of DigSilent.
- Full Text:
- Date Issued: 2017
- Authors: Pantshwa, Athini
- Date: 2017
- Subjects: Electric power distribution Electricity -- Supply -- Engineering , Smart power grids
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/19750 , vital:28953
- Description: A stable and reliable electrical power supply system is an inevitable pre-requisite for the technological and economic growth of any nation. Due to this, utilities must strive and ensure that the customer’s reliability requirements are met and that the regulators requirements are satisfied at the lowest possible cost. It is known fact around the world that 90% of the customer service interruptions are caused due to failure in distribution system. Therefore, it is worth considering reliability assessments as it provides an opportunity to incorporate the cost or losses incurred by the utilities customer as a result of power failure. This must be considered in the planning and operating practices. The system modelling and simulation study is carried out on one of the district’s distribution system which consists of 132 kV, 66 kV and 22 kV network in Aliwal North Sector ECOU. The reliability assessment is done on the 22, 66 and 132 kV system to assess the performance of the present system and also predictive reliability analysis for the future system considering load growth and system expansion. The alternative which gives low SAIDI, SAIFI and minimum breakeven costs is being assessed and considered. The reliability of 132 kV system could be further improved by constructing a new 132 kV line from a different source of supply and connecting with line coming from another district (reserve) at reasonable break even cost. The decision base could be further improved by having Aliwal North Sector context interruption cost. However, the historical data which may be used in Aliwal North Sector to acquire interruption costs from the customers are being proposed. The focus should be on improving the power quality on constrained networks first, then the reliability. Therefore for the Aliwal North power system network it is imperative that Eskom invest on the reliability of this network. This dissertation also analysed load reflected economic benefit versus performance expectations that should be optimized through achieving a balance between network performance (SAIDI) improvement, and total life cycle cost (to Eskom as well as the economy). Reliability analysis conducted in this dissertation used Aliwal North power system network as a case study; the results proved that the system is vulnerable to faults, planned and unplanned outages. Reliability evaluation studies were conducted on the system using DigSilent software in conjunction with FME. These two models gave accurate results with acceptable variance in most indices except for the ENS where the variance was quite significant. It can be concluded that DigSilent results are the most accurate results in all three reliability evaluation scenarios for the Aliwal North Power System, best interpretation being that of DigSilent.
- Full Text:
- Date Issued: 2017
Anti-fetishism: parodying the depiction of the female body as fetish
- Authors: Pirie, René Alexis
- Date: 2017
- Subjects: Body image -- Social aspects Fashion -- Social aspects
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/20377 , vital:29272
- Description: sexual objectification of women is widespread in contemporary lifestyle and fashion magazines. Models used for advertising purposes often set a standard of beauty and youth that is unrealistic and limiting. This standard has damaging effects on women’s sense of self and their societal behaviour. Such images not only sexualise as well as fetishise women’s bodies, but also encourage self-surveillance. This research study examines Cindy Sherman, Sarah Lucas, Louise Bourgeois and Ángela Burón’s artistic responses to fetishized images of women, in order to assess what artistic strategies could be used to oppose such images in magazine advertisements. It aims to identify what anti-fetishism involves in theory and practice and to use this information to formulate an anti-fetish strategy which informs a series of anti-fetish artworks. The purpose of this series of works is to oppose the fetishization of women, particularly in magazine advertisements of high-end consumer products. The study contributes to the discourse of anti-fetishism and addresses a knowledge gap since research on anti-fetishism has much room for development. It is a Qualitative research study which adhered to a Practice-based research method. The key findings of this study are that anti-fetishism and female fetishism are approaches that differ from one another yet also overlap. Furthermore, Anti-fetishism involves the use of parodic mockery, while female fetishism is concerned mostly with undecidability as a strategy. From the examination of the artists, the anti-fetishistic strategy of parody, largely influenced the practical component of this research study. Parody offers a clear opposition to the still widespread fetishization of women in magazines both in South Africa and other Westernized countries across the world.
- Full Text:
- Date Issued: 2017
- Authors: Pirie, René Alexis
- Date: 2017
- Subjects: Body image -- Social aspects Fashion -- Social aspects
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/20377 , vital:29272
- Description: sexual objectification of women is widespread in contemporary lifestyle and fashion magazines. Models used for advertising purposes often set a standard of beauty and youth that is unrealistic and limiting. This standard has damaging effects on women’s sense of self and their societal behaviour. Such images not only sexualise as well as fetishise women’s bodies, but also encourage self-surveillance. This research study examines Cindy Sherman, Sarah Lucas, Louise Bourgeois and Ángela Burón’s artistic responses to fetishized images of women, in order to assess what artistic strategies could be used to oppose such images in magazine advertisements. It aims to identify what anti-fetishism involves in theory and practice and to use this information to formulate an anti-fetish strategy which informs a series of anti-fetish artworks. The purpose of this series of works is to oppose the fetishization of women, particularly in magazine advertisements of high-end consumer products. The study contributes to the discourse of anti-fetishism and addresses a knowledge gap since research on anti-fetishism has much room for development. It is a Qualitative research study which adhered to a Practice-based research method. The key findings of this study are that anti-fetishism and female fetishism are approaches that differ from one another yet also overlap. Furthermore, Anti-fetishism involves the use of parodic mockery, while female fetishism is concerned mostly with undecidability as a strategy. From the examination of the artists, the anti-fetishistic strategy of parody, largely influenced the practical component of this research study. Parody offers a clear opposition to the still widespread fetishization of women in magazines both in South Africa and other Westernized countries across the world.
- Full Text:
- Date Issued: 2017
Antimicrobial activity of selected plants and their combined preparations against pathogens causing respiratory infections
- Authors: Onyebuchi, Ukwuoma Collins
- Date: 2017
- Subjects: Anti-infective agents , Respiratory infections -- Alternative treatment
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/21197 , vital:29455
- Description: Bacterial infection of the respiratory system is one of the leading causes of death in the world’s population, killing over four million people annually. Treatment of respiratory infections is usually by antibiotics administration. The emergence of multi-drug-resistant pathogens has led to the search for more effective therapeutic agents especially from medicinal plants, as compounds from plants have been shown to possess some therapeutic potential. The aim of this study is to determine the antimicrobial activity of three plants, Tetradenia riparia, Leonotis leonurus and Salvia africana-lutea and the activity of their various combined preparations against 27 pathogens usually associated with respiratory ailments. Various solvents were used for extraction of the dried powdered plant materials. The agar disc diffusion antimicrobial assay and the micro-dilution assay methods were used to determine the inhibitory activity and the minimum inhibitory concentration of the plant extracts. The nature of phytochemicals present in the extracts was determined by thin layer chromatography. The results obtained in this study, showed that ethanol produced the highest average extract yield in both the individual and combined plant preparations. A two-way analysis of variance for the disc diffusion assay showed no significant difference in the inhibition zones (Appendix 1 and 2). MIC of 0.8 mg/ml was obtained with S. africana-lutea against S. pneumoniae ATCC 49619 and B. cereus ATCC 10976 strains, indicating a strong antibacterial activity. Synergistic interaction (FIC index ranging from 0.20 – 0.50) and a strong antimicrobial activity (MIC values ranging from 0.4 – 0.8 mg/ml), was obtained with the acetone extract of the 1:1 combination of L. leonurus with S. africana-lutea. The XEA and CEF solvent systems eluted the most number of compound spots and produced the best separations. The results obtained in this study validate the traditional use of these plants and their combinations for the treatment of respiratory ailments.
- Full Text:
- Date Issued: 2017
- Authors: Onyebuchi, Ukwuoma Collins
- Date: 2017
- Subjects: Anti-infective agents , Respiratory infections -- Alternative treatment
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/21197 , vital:29455
- Description: Bacterial infection of the respiratory system is one of the leading causes of death in the world’s population, killing over four million people annually. Treatment of respiratory infections is usually by antibiotics administration. The emergence of multi-drug-resistant pathogens has led to the search for more effective therapeutic agents especially from medicinal plants, as compounds from plants have been shown to possess some therapeutic potential. The aim of this study is to determine the antimicrobial activity of three plants, Tetradenia riparia, Leonotis leonurus and Salvia africana-lutea and the activity of their various combined preparations against 27 pathogens usually associated with respiratory ailments. Various solvents were used for extraction of the dried powdered plant materials. The agar disc diffusion antimicrobial assay and the micro-dilution assay methods were used to determine the inhibitory activity and the minimum inhibitory concentration of the plant extracts. The nature of phytochemicals present in the extracts was determined by thin layer chromatography. The results obtained in this study, showed that ethanol produced the highest average extract yield in both the individual and combined plant preparations. A two-way analysis of variance for the disc diffusion assay showed no significant difference in the inhibition zones (Appendix 1 and 2). MIC of 0.8 mg/ml was obtained with S. africana-lutea against S. pneumoniae ATCC 49619 and B. cereus ATCC 10976 strains, indicating a strong antibacterial activity. Synergistic interaction (FIC index ranging from 0.20 – 0.50) and a strong antimicrobial activity (MIC values ranging from 0.4 – 0.8 mg/ml), was obtained with the acetone extract of the 1:1 combination of L. leonurus with S. africana-lutea. The XEA and CEF solvent systems eluted the most number of compound spots and produced the best separations. The results obtained in this study validate the traditional use of these plants and their combinations for the treatment of respiratory ailments.
- Full Text:
- Date Issued: 2017
Concrete work decision analysis in Bloemfontein
- Authors: Mollo, Lesiba George
- Date: 2017
- Subjects: Concrete construction -- South Africa -- Bloemfontein -- Decision making Concrete construction industry -- South Africa -- Bloemfontein -- Decision making , Construction projects -- South Africa -- Bloemfontein Building -- Estimates -- South Africa -- Bloemfontein
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/19190 , vital:28783
- Description: The purpose of this study was to evolve how to reduce the manifestation of poor decisions that always produce defects and rework. The purpose of the study is predicated on the fact that good decision-making is a fundamental element of improved project delivery in the construction industry. Such decisions determine the accomplishment of performance parameters in each project. However, suboptimal performance, which is pervasive in the construction industry, is often linked to team decisions. To remedy decision-making pitfalls, the concept of Choosing by Advantages (CBA) is promoted by lean construction researchers. CBA is a decision-making system that assists project parties in deciding a course of action among competing alternatives. Case study research design was used for this project to discover the decision-making process adopted by project teams. The results from the study achieved through cross-case analysis shows that concrete defects and rework is often caused by the project team’s decision-making process, which is influenced by the members of the project team because of lack of experience, poor working conditions, and lack of education. The results also show that the decision-making mechanism of the project teams is influenced by the construction method, specification, cost, quality and time. The outcome of the project team’s decision-making process when choosing a concrete type often causes the concrete defects and rework, which can be eliminated through the application of CBA when choosing a concrete type. The application of CBA when choosing concrete type from two alternatives, ready mixed concrete and site batched concrete is driven by the project team. It was discovered from all three cases that ready-mixed concrete had a better score than site-batched concrete when using CBA to compare these two alternatives. The results show that ready-mixed concrete had less chances of causing concrete defects and rework when used or applied per the correct specifications or methods which are detailed in the engineering drawings of the structure. The study proposes that the project team should adopt CBA to improve their decision-making process on site especially when working with concrete.
- Full Text:
- Date Issued: 2017
- Authors: Mollo, Lesiba George
- Date: 2017
- Subjects: Concrete construction -- South Africa -- Bloemfontein -- Decision making Concrete construction industry -- South Africa -- Bloemfontein -- Decision making , Construction projects -- South Africa -- Bloemfontein Building -- Estimates -- South Africa -- Bloemfontein
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/19190 , vital:28783
- Description: The purpose of this study was to evolve how to reduce the manifestation of poor decisions that always produce defects and rework. The purpose of the study is predicated on the fact that good decision-making is a fundamental element of improved project delivery in the construction industry. Such decisions determine the accomplishment of performance parameters in each project. However, suboptimal performance, which is pervasive in the construction industry, is often linked to team decisions. To remedy decision-making pitfalls, the concept of Choosing by Advantages (CBA) is promoted by lean construction researchers. CBA is a decision-making system that assists project parties in deciding a course of action among competing alternatives. Case study research design was used for this project to discover the decision-making process adopted by project teams. The results from the study achieved through cross-case analysis shows that concrete defects and rework is often caused by the project team’s decision-making process, which is influenced by the members of the project team because of lack of experience, poor working conditions, and lack of education. The results also show that the decision-making mechanism of the project teams is influenced by the construction method, specification, cost, quality and time. The outcome of the project team’s decision-making process when choosing a concrete type often causes the concrete defects and rework, which can be eliminated through the application of CBA when choosing a concrete type. The application of CBA when choosing concrete type from two alternatives, ready mixed concrete and site batched concrete is driven by the project team. It was discovered from all three cases that ready-mixed concrete had a better score than site-batched concrete when using CBA to compare these two alternatives. The results show that ready-mixed concrete had less chances of causing concrete defects and rework when used or applied per the correct specifications or methods which are detailed in the engineering drawings of the structure. The study proposes that the project team should adopt CBA to improve their decision-making process on site especially when working with concrete.
- Full Text:
- Date Issued: 2017
Craftsmanship in contemporary art: an exposition of selected artists’ practical non-involvement
- Van der Walt, Jonathan Petra
- Authors: Van der Walt, Jonathan Petra
- Date: 2017
- Subjects: Art, Modern -- 21st century Sculpture -- South Africa -- Technique , Art and technology -- 21st century
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/21285 , vital:29471
- Description: Craftsmanship in contemporary art production is the main area of focus for this visual arts based research. An exploration into the artistic production processes of selected contemporary artists’ work, reveals a tendency of physical non-involvement on the part of the artist, who takes up the role of art director. The research enquiry attempts to provide an answer as to whether credit should be given to the craftsman as well as to the artist in this artist/craftsman relationship. The use of a practice-led research strategy allows the researcher’s art-making practice to become an integral part of the cycles of research, as the development of the researcher’s practical understanding, techniques and execution are crucial in the practical component, but also conceptually as a stance in opposition to the selected artists’ lack of practical involvement. The researcher has identified and analysed the following five factors that have contributed to this current state of art production in contemporary art: Kitsch as an influence on the subject matter and content of art, Marcel Duchamp and his idea of the ‘readymade’ and issues of authorship, Andy Warhol and his ideas on art and business, the Conceptual Art movement and, the act and product of craft being perceived as being inferior to the fine arts In addition, an exploration of the production processes involved in the creation of the artworks of Jeff Koons, Damien Hirst, Maurizio Cattelan and Takashi Murakami highlights the craftspeople, fabricators and foundries that are responsible for these artists’ highly crafted aesthetics. As practice is crucial in developing a new understanding and meaning in visual-arts based research, the practical component describes the researcher’s core practical themes as being the following:the creation of naturalistic figurative small-scale sculptures in resin and bronze, placing the characters explored in the theoretical component as the subject matter.The advantages and disadvantages of the collaborative experience with Sculpture Casting Services (fine art foundry) and eNtsa (a Technology Innovation agency), especially the implementation of 3D technologies in both experiences; and the technical development and understanding in order to improve the researcher’s artistic practice Collaboration is an important underlying theme throughout this research undertaking. It is crucial in the production of most contemporary art, and assists in identifying the artist’s role within the production of his/her work. Finally, it relates to the researcher’s collaborative experience expanded upon in the practical component and its benefits as a production method. In concluding, the researcher finds that craftspeople do receive credit for the work they do in the form of money, business and marketing. They provide a service that a great number of artists generously support. Foundries and fabricators also place a mark on the work they do, much like the artist’s signature, as a symbol of pride and recognition. It is ultimately the artist’s technical abilities, workload and artist identity or brand that will determine the extent to which he or she will contribute to the collaboration, whether that be a simple idea, a sketch, a maquette or a large-scale sculpture ready for installation. However, in a rapidly advancing technological society, it is the idea of the artist as craftsman, both thinker and maker, that demands more respect.
- Full Text:
- Date Issued: 2017
- Authors: Van der Walt, Jonathan Petra
- Date: 2017
- Subjects: Art, Modern -- 21st century Sculpture -- South Africa -- Technique , Art and technology -- 21st century
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/21285 , vital:29471
- Description: Craftsmanship in contemporary art production is the main area of focus for this visual arts based research. An exploration into the artistic production processes of selected contemporary artists’ work, reveals a tendency of physical non-involvement on the part of the artist, who takes up the role of art director. The research enquiry attempts to provide an answer as to whether credit should be given to the craftsman as well as to the artist in this artist/craftsman relationship. The use of a practice-led research strategy allows the researcher’s art-making practice to become an integral part of the cycles of research, as the development of the researcher’s practical understanding, techniques and execution are crucial in the practical component, but also conceptually as a stance in opposition to the selected artists’ lack of practical involvement. The researcher has identified and analysed the following five factors that have contributed to this current state of art production in contemporary art: Kitsch as an influence on the subject matter and content of art, Marcel Duchamp and his idea of the ‘readymade’ and issues of authorship, Andy Warhol and his ideas on art and business, the Conceptual Art movement and, the act and product of craft being perceived as being inferior to the fine arts In addition, an exploration of the production processes involved in the creation of the artworks of Jeff Koons, Damien Hirst, Maurizio Cattelan and Takashi Murakami highlights the craftspeople, fabricators and foundries that are responsible for these artists’ highly crafted aesthetics. As practice is crucial in developing a new understanding and meaning in visual-arts based research, the practical component describes the researcher’s core practical themes as being the following:the creation of naturalistic figurative small-scale sculptures in resin and bronze, placing the characters explored in the theoretical component as the subject matter.The advantages and disadvantages of the collaborative experience with Sculpture Casting Services (fine art foundry) and eNtsa (a Technology Innovation agency), especially the implementation of 3D technologies in both experiences; and the technical development and understanding in order to improve the researcher’s artistic practice Collaboration is an important underlying theme throughout this research undertaking. It is crucial in the production of most contemporary art, and assists in identifying the artist’s role within the production of his/her work. Finally, it relates to the researcher’s collaborative experience expanded upon in the practical component and its benefits as a production method. In concluding, the researcher finds that craftspeople do receive credit for the work they do in the form of money, business and marketing. They provide a service that a great number of artists generously support. Foundries and fabricators also place a mark on the work they do, much like the artist’s signature, as a symbol of pride and recognition. It is ultimately the artist’s technical abilities, workload and artist identity or brand that will determine the extent to which he or she will contribute to the collaboration, whether that be a simple idea, a sketch, a maquette or a large-scale sculpture ready for installation. However, in a rapidly advancing technological society, it is the idea of the artist as craftsman, both thinker and maker, that demands more respect.
- Full Text:
- Date Issued: 2017
Developing end-user requirements for the design of an eProcurement portal
- Authors: Du Preez, Pedro Gordon
- Date: 2017
- Subjects: End-user computing , Government purchasing -- South Africa Business information services Management information systems Business logistics -- South Africa
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/33272 , vital:32628
- Description: During the 2015 South African budget speech, the country was made aware of the proposed changes to be introduced to the tendering process. These changes were to be implemented from 1 April 2015 and were to span over two years. The changes were to facilitate the transition of the tendering process from a paper- based system to a completely digital process, where the majority of the processes will take place on an eProcurement portal (www.etenders.gov.za). This means that businesses will be obligated to use the portal, in order to access tender opportunities and ultimately, to submit tenders on this portal, with the phasing out of all paper-based tender processes. If the portal is to succeed it has to be well adopted by its users. If the portal is not adopted or is used incorrectly, businesses might struggle to access tender opportunities for their business. This research searches to address this problem by helping the users of this portal to gain efficient and effective access to tendering opportunities, through finding and developing user requirements for successful adoption from a user experience perspective. The primary objective of this research is to develop end-user requirements for the design of an eProcurement portal. To achieve this, a general understanding of the legal policies in place for tendering is necessary, as well as a first-hand experience of the users. Case study research methodology and a mixed method approach are used to gather both qualitative and quantitative data. The case study is conducted in the Eastern Cape and directed at business within the construction sector that do tender, as this research is only focusing on the end user and their roles within the tendering process and not on the government internal tendering processes. The outcome of this research is to offer a list of user requirements that can be used within the design of the eProcurement portal that will function as valuable material towards the adoption and effectiveness of the eProcurement portal.
- Full Text:
- Date Issued: 2017
- Authors: Du Preez, Pedro Gordon
- Date: 2017
- Subjects: End-user computing , Government purchasing -- South Africa Business information services Management information systems Business logistics -- South Africa
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/33272 , vital:32628
- Description: During the 2015 South African budget speech, the country was made aware of the proposed changes to be introduced to the tendering process. These changes were to be implemented from 1 April 2015 and were to span over two years. The changes were to facilitate the transition of the tendering process from a paper- based system to a completely digital process, where the majority of the processes will take place on an eProcurement portal (www.etenders.gov.za). This means that businesses will be obligated to use the portal, in order to access tender opportunities and ultimately, to submit tenders on this portal, with the phasing out of all paper-based tender processes. If the portal is to succeed it has to be well adopted by its users. If the portal is not adopted or is used incorrectly, businesses might struggle to access tender opportunities for their business. This research searches to address this problem by helping the users of this portal to gain efficient and effective access to tendering opportunities, through finding and developing user requirements for successful adoption from a user experience perspective. The primary objective of this research is to develop end-user requirements for the design of an eProcurement portal. To achieve this, a general understanding of the legal policies in place for tendering is necessary, as well as a first-hand experience of the users. Case study research methodology and a mixed method approach are used to gather both qualitative and quantitative data. The case study is conducted in the Eastern Cape and directed at business within the construction sector that do tender, as this research is only focusing on the end user and their roles within the tendering process and not on the government internal tendering processes. The outcome of this research is to offer a list of user requirements that can be used within the design of the eProcurement portal that will function as valuable material towards the adoption and effectiveness of the eProcurement portal.
- Full Text:
- Date Issued: 2017
Earth stewardship in prepress:a model for Nelson Mandela Metropolitan University graphic design lectures
- Authors: Lottering,John Barry
- Date: 2017
- Subjects: Curriculum planning--South Africa-- Port Elizabeth Graphic arts--Study and teaching--South africa-- Port Elizabeth
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/44471 , vital:37842
- Description: A lack of prepress understanding is responsible for a great deal of wasted resources in the graphic design and printing industries in Nelson Mandela Bay. As the term “prepress” extends to such a vast range of design activities, it is quite difficult to ascertain where prepress begins or ends. Asking the question “What is prepress?” is like asking “How long is a piece of string?” Defining the scope of prepress can present a formidable challenge for any graphic design lecturer hoping to equip students with the necessary prepress understanding and skills required by the graphic design industry. Also, even if the academic has a sound knowledge of prepress theory and practice, how does one guarantee that all of the required knowledge is covered during the course of the student’s graphic design education, and that it is done so in a manner that meets the needs of the graphic design industry? Added to this, educators have a responsibility to consider the environmental consequences of sending graduating designers, without industry required prepress knowledge, into the design industry, an industry that has grown accustomed to training junior designers in prepress practice through trial and error. Such trial and error equates to mistakes and wasted resources, as a result this learning curve comes at the expense of the environment. The intention of this research is to provide an accessible resource for graphic design lecturers, by way of a list of prepress best practice topics, required for inclusion in the graphic design syllabus at NMMU, such that earth stewardship and sustainable design-for-print are an implicit component. This list of topics is a product of research which drew on local industry experts in Nelson Mandela Bay.
- Full Text:
- Date Issued: 2017
- Authors: Lottering,John Barry
- Date: 2017
- Subjects: Curriculum planning--South Africa-- Port Elizabeth Graphic arts--Study and teaching--South africa-- Port Elizabeth
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/44471 , vital:37842
- Description: A lack of prepress understanding is responsible for a great deal of wasted resources in the graphic design and printing industries in Nelson Mandela Bay. As the term “prepress” extends to such a vast range of design activities, it is quite difficult to ascertain where prepress begins or ends. Asking the question “What is prepress?” is like asking “How long is a piece of string?” Defining the scope of prepress can present a formidable challenge for any graphic design lecturer hoping to equip students with the necessary prepress understanding and skills required by the graphic design industry. Also, even if the academic has a sound knowledge of prepress theory and practice, how does one guarantee that all of the required knowledge is covered during the course of the student’s graphic design education, and that it is done so in a manner that meets the needs of the graphic design industry? Added to this, educators have a responsibility to consider the environmental consequences of sending graduating designers, without industry required prepress knowledge, into the design industry, an industry that has grown accustomed to training junior designers in prepress practice through trial and error. Such trial and error equates to mistakes and wasted resources, as a result this learning curve comes at the expense of the environment. The intention of this research is to provide an accessible resource for graphic design lecturers, by way of a list of prepress best practice topics, required for inclusion in the graphic design syllabus at NMMU, such that earth stewardship and sustainable design-for-print are an implicit component. This list of topics is a product of research which drew on local industry experts in Nelson Mandela Bay.
- Full Text:
- Date Issued: 2017
Evaluation of near infrared reflectance (NIR) spectroscopy to determine the nutrient composition of raw materials and compound ostrich feeds
- Swart, Etheresia, Lehmann-Maritz, Maryna
- Authors: Swart, Etheresia , Lehmann-Maritz, Maryna
- Date: 2017
- Subjects: Near infrared spectroscopy , Animal nutrition , Animal feeding
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/13779 , vital:27307
- Description: The chemical analysis of feed samples can be time consuming and expensive. The use of near infrared reflectance (NIR) spectroscopy was evaluated in a range of studies as a rapid technique to predict the chemical constituents in feedstuffs and compound ostrich feeds. The prediction of accurate results by NIR spectroscopy relies heavily upon obtaining a calibration set which represents the variation in the main population, accurate laboratory analyses and the application of the best mathematical procedures. This research project was designed to meet five objectives: The first objective was to determine the feasibility of using near infrared reflectance (NIR) spectroscopy to predict dry matter, ash, crude protein, crude fibre, oil content, and fatty acids such as palmitic acid (C16:0), stearic acid (C18:0), oleic acid (C18:1) and linoleic acid (C18:2) in sunflower seed meal. The second objective was to develop calibration models to predict the dry matter, crude protein and oil content in milled canola seed, compared to whole canola seeds. The third objective was to investigate the feasibility of using NIR spectroscopy to predict the dry matter, ash, crude protein, crude fibre and oil content in milled lupin seeds, compared to whole lupin seeds. The fourth objective was to describe the development of near infrared reflectance (NIR) spectroscopy calibration equations for the prediction of chemical composition and amino acid content from different populations of alfalfa hay (Medicago sativa L.). The last objective was to determine the potential of NIR spectroscopy to predict the dry matter, ash, crude protein, crude fibre, ether extract, acid detergent fibre (ADF), neutral detergent fibre (NDF), calcium, phosphorus, in vitro organic matter digestibility (IVOMD) and amino acids such as lysine, methionine, threonine and arginine in compound ostrich feed samples. The results of this study indicate that NIR spectroscopy calibrations in sunflower seed meal are only applicable in sunflower breeding programmes for a fast screening as it was not suitable for prediction purposes. Screening of sunflower seeds by NIR spectroscopy represents a rapid, simple and cost effective alternative that is a great utility for users who need to analyse a large number of samples. Calibrations developed for crude protein and oil content in milled canola seeds proved to be better than calibrations for whole canola seeds. Although the results indicated that calibrations were better for milled canola seeds, it indicated values that were typical of equations suitable for screening purposes to select samples for more detailed chemical analysis. According to calibration statistics obtained for crude protein, crude fibre and oil content in whole lupin seeds, there is no need to grind the seeds to scan the meal as similarly accurate results were obtained by analysing whole seeds. Screening of whole lupin seeds by NIR spectroscopy represents a rapid, simple and cost effective alternative that may be of great utility for users who need to analyse a large number of samples with no sample preparation. The calibration and validation statistics obtained in the study to test the potential of NIR spectroscopy to predict the chemical composition and amino acid contents in alfalfa hay, showed the accuracy was too low for routine analysis, although NIR spectroscopy could be used as a screening tool. Further research needs to be done to improve the accuracy of the NIR spectroscopy analysis, including more samples from different cultivars and years. In the study to examine the possibility of using NIR spectroscopy to predict the chemical composition of compound ostrich feeds, the results indicated that NIR spectroscopy is a suitable tool for a rapid and reliable prediction of the crude protein, crude fibre, ether extract, IVOMD, ADF and NDF in compound ostrich feeds. Calibrations can be improved for amino acids if a larger sample pool is used to develop the calibrations. These studies indicated that NIR spectroscopy can be a rapid and successful tool for the prediction of the nutritive value up to certain amino acid contents of feedstuffs and compound ostrich feeds.
- Full Text:
- Date Issued: 2017
- Authors: Swart, Etheresia , Lehmann-Maritz, Maryna
- Date: 2017
- Subjects: Near infrared spectroscopy , Animal nutrition , Animal feeding
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/13779 , vital:27307
- Description: The chemical analysis of feed samples can be time consuming and expensive. The use of near infrared reflectance (NIR) spectroscopy was evaluated in a range of studies as a rapid technique to predict the chemical constituents in feedstuffs and compound ostrich feeds. The prediction of accurate results by NIR spectroscopy relies heavily upon obtaining a calibration set which represents the variation in the main population, accurate laboratory analyses and the application of the best mathematical procedures. This research project was designed to meet five objectives: The first objective was to determine the feasibility of using near infrared reflectance (NIR) spectroscopy to predict dry matter, ash, crude protein, crude fibre, oil content, and fatty acids such as palmitic acid (C16:0), stearic acid (C18:0), oleic acid (C18:1) and linoleic acid (C18:2) in sunflower seed meal. The second objective was to develop calibration models to predict the dry matter, crude protein and oil content in milled canola seed, compared to whole canola seeds. The third objective was to investigate the feasibility of using NIR spectroscopy to predict the dry matter, ash, crude protein, crude fibre and oil content in milled lupin seeds, compared to whole lupin seeds. The fourth objective was to describe the development of near infrared reflectance (NIR) spectroscopy calibration equations for the prediction of chemical composition and amino acid content from different populations of alfalfa hay (Medicago sativa L.). The last objective was to determine the potential of NIR spectroscopy to predict the dry matter, ash, crude protein, crude fibre, ether extract, acid detergent fibre (ADF), neutral detergent fibre (NDF), calcium, phosphorus, in vitro organic matter digestibility (IVOMD) and amino acids such as lysine, methionine, threonine and arginine in compound ostrich feed samples. The results of this study indicate that NIR spectroscopy calibrations in sunflower seed meal are only applicable in sunflower breeding programmes for a fast screening as it was not suitable for prediction purposes. Screening of sunflower seeds by NIR spectroscopy represents a rapid, simple and cost effective alternative that is a great utility for users who need to analyse a large number of samples. Calibrations developed for crude protein and oil content in milled canola seeds proved to be better than calibrations for whole canola seeds. Although the results indicated that calibrations were better for milled canola seeds, it indicated values that were typical of equations suitable for screening purposes to select samples for more detailed chemical analysis. According to calibration statistics obtained for crude protein, crude fibre and oil content in whole lupin seeds, there is no need to grind the seeds to scan the meal as similarly accurate results were obtained by analysing whole seeds. Screening of whole lupin seeds by NIR spectroscopy represents a rapid, simple and cost effective alternative that may be of great utility for users who need to analyse a large number of samples with no sample preparation. The calibration and validation statistics obtained in the study to test the potential of NIR spectroscopy to predict the chemical composition and amino acid contents in alfalfa hay, showed the accuracy was too low for routine analysis, although NIR spectroscopy could be used as a screening tool. Further research needs to be done to improve the accuracy of the NIR spectroscopy analysis, including more samples from different cultivars and years. In the study to examine the possibility of using NIR spectroscopy to predict the chemical composition of compound ostrich feeds, the results indicated that NIR spectroscopy is a suitable tool for a rapid and reliable prediction of the crude protein, crude fibre, ether extract, IVOMD, ADF and NDF in compound ostrich feeds. Calibrations can be improved for amino acids if a larger sample pool is used to develop the calibrations. These studies indicated that NIR spectroscopy can be a rapid and successful tool for the prediction of the nutritive value up to certain amino acid contents of feedstuffs and compound ostrich feeds.
- Full Text:
- Date Issued: 2017
Experiences of analogue-trained radiographers utilising digital imaging in projection radiography
- Authors: Campbell, Sydney
- Date: 2017
- Subjects: Radiography, Medical -- Digital techniques Angiography , Image processing -- Digital techniques Radiography
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/14796 , vital:27851
- Description: The professional work of a radiographer encompasses both patient care and the use of technology. The technology employed could either be analogue or digital technology. Since 1973, the analogue imaging system has slowly been replaced by digital radiography imaging systems. Despite the many advantages of digital imaging it does present the radiographer with added responsibilities. Furthermore, analogue-trained radiographers have found adjusting to digital imaging especially challenging. The aim of the study was to explore and describe the experiences of analogue-trained radiographers utilising digital imaging in projection radiography with the intention of developing guidelines to equip radiography managers to assist analogue-trained radiographers to better utilise digital imaging. The researcher used Schlossberg’s Transition Theory as a lens to look at the experiences of analogue-trained radiographers using digital imaging to produce radiographs. The research study used a qualitative design which was explorative, descriptive and contextual in nature. The target population included all diagnostic radiographers (public and private) in the local municipality who were registered with the Health Professions Council of South Africa. Purposive sampling was employed to select the radiographers that represented all radiographers in the Nelson Mandela Bay Health District. The sample included all radiographers who fulfilled the identified selection criteria. The selected participants were recruited to take part in in-depth, semi-structured individual interviews. The data was analysed using a computer-aided qualitative data analysis software package, ATLAS.ti. The trustworthiness of this study was ensured by applying Guba’s model of trustworthiness that includes credibility, transferability, dependability and confirmability. The ethical principles of respect for persons, beneficence and justice, as espoused by the Belmont Report, were adhered to in order to ensure that the study was conducted in an ethical manner. Two themes emanated from the data, namely the evolution of the radiographer when faced with the advances in technology as well the role that the work environment played in the manner that the participants experienced the change. The experiences of the participants were described using direct quotations from the interviews and a literature control was used to verify the participants’ experiences. Evidence was found of radiographer indifference towards exposure selection, dose optimisation and placement of anatomical side markers when utilising digital imaging. Finally, guidelines were developed to equip radiography managers to assist analogue-trained radiographers to better utilise digital imaging. In addition, the guidelines will assist all other radiographers to better utilise digital imaging.
- Full Text:
- Date Issued: 2017
- Authors: Campbell, Sydney
- Date: 2017
- Subjects: Radiography, Medical -- Digital techniques Angiography , Image processing -- Digital techniques Radiography
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/14796 , vital:27851
- Description: The professional work of a radiographer encompasses both patient care and the use of technology. The technology employed could either be analogue or digital technology. Since 1973, the analogue imaging system has slowly been replaced by digital radiography imaging systems. Despite the many advantages of digital imaging it does present the radiographer with added responsibilities. Furthermore, analogue-trained radiographers have found adjusting to digital imaging especially challenging. The aim of the study was to explore and describe the experiences of analogue-trained radiographers utilising digital imaging in projection radiography with the intention of developing guidelines to equip radiography managers to assist analogue-trained radiographers to better utilise digital imaging. The researcher used Schlossberg’s Transition Theory as a lens to look at the experiences of analogue-trained radiographers using digital imaging to produce radiographs. The research study used a qualitative design which was explorative, descriptive and contextual in nature. The target population included all diagnostic radiographers (public and private) in the local municipality who were registered with the Health Professions Council of South Africa. Purposive sampling was employed to select the radiographers that represented all radiographers in the Nelson Mandela Bay Health District. The sample included all radiographers who fulfilled the identified selection criteria. The selected participants were recruited to take part in in-depth, semi-structured individual interviews. The data was analysed using a computer-aided qualitative data analysis software package, ATLAS.ti. The trustworthiness of this study was ensured by applying Guba’s model of trustworthiness that includes credibility, transferability, dependability and confirmability. The ethical principles of respect for persons, beneficence and justice, as espoused by the Belmont Report, were adhered to in order to ensure that the study was conducted in an ethical manner. Two themes emanated from the data, namely the evolution of the radiographer when faced with the advances in technology as well the role that the work environment played in the manner that the participants experienced the change. The experiences of the participants were described using direct quotations from the interviews and a literature control was used to verify the participants’ experiences. Evidence was found of radiographer indifference towards exposure selection, dose optimisation and placement of anatomical side markers when utilising digital imaging. Finally, guidelines were developed to equip radiography managers to assist analogue-trained radiographers to better utilise digital imaging. In addition, the guidelines will assist all other radiographers to better utilise digital imaging.
- Full Text:
- Date Issued: 2017
Farmers’ perception on factors influencing small-scale vegetable production at Tsengiwe village, South Africa
- Authors: Gqibityala, Akhona
- Date: 2017
- Subjects: Farmers -- South Africa -- Eastern Cape Farms, Small -- South Africa -- Eastern Cape , Vegetable gardening -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/15281 , vital:28210
- Description: Food security and self-sufficiency in the rural areas has been and remains a major concern for the South African government. The study aimed to investigate farmer’s perception of factors influencing small-scale vegetable production in Tsengiwe village in the Eastern Cape. The research focus was on the following aspects that may have an influence on small-scale vegetable production: socio-economic factors, production and resource deficiencies and the impact of indigenous leafy vegetables. The researcher conducted several demonstration workshops during the field work. The pilot studies and community engagements were essential to extract knowledge systems embedded in the cultural traditions of indigenous or local communities. The action research was part of the reflective process of broadminded problem solving led by researcher and community. The research approach used a triangulation research method to extract information, whereby both quantitative and qualitative research was used to ensure greater accuracy. The main data collection was obtained from interviews with small-scale farming households in the Tsengiwe area. The study revealed that households were dependent on elderly female pensioners to source food and water. These women received most of their income from social grants and were mainly responsible for all farming activities in the households. Most households attempted to produce vegetables, although food security and self-sufficiency through own production was rarely achieved.Other perceived farming challenges included: lack of market accessibility, irrigation infrastructure, drought, financial limitations and soil degradation. Indigenous leafy vegetables were found to play a nutritional role in times of food shortage and not as much for their medicinal value. The study recommended the following interventions: Support for the elderly women in development and production practices, interventions to address factors affecting vegetable production, improving soil structure, working towards food self-sufficiency, moving away from dependence on mechanisation in rural farming.
- Full Text:
- Date Issued: 2017
- Authors: Gqibityala, Akhona
- Date: 2017
- Subjects: Farmers -- South Africa -- Eastern Cape Farms, Small -- South Africa -- Eastern Cape , Vegetable gardening -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/15281 , vital:28210
- Description: Food security and self-sufficiency in the rural areas has been and remains a major concern for the South African government. The study aimed to investigate farmer’s perception of factors influencing small-scale vegetable production in Tsengiwe village in the Eastern Cape. The research focus was on the following aspects that may have an influence on small-scale vegetable production: socio-economic factors, production and resource deficiencies and the impact of indigenous leafy vegetables. The researcher conducted several demonstration workshops during the field work. The pilot studies and community engagements were essential to extract knowledge systems embedded in the cultural traditions of indigenous or local communities. The action research was part of the reflective process of broadminded problem solving led by researcher and community. The research approach used a triangulation research method to extract information, whereby both quantitative and qualitative research was used to ensure greater accuracy. The main data collection was obtained from interviews with small-scale farming households in the Tsengiwe area. The study revealed that households were dependent on elderly female pensioners to source food and water. These women received most of their income from social grants and were mainly responsible for all farming activities in the households. Most households attempted to produce vegetables, although food security and self-sufficiency through own production was rarely achieved.Other perceived farming challenges included: lack of market accessibility, irrigation infrastructure, drought, financial limitations and soil degradation. Indigenous leafy vegetables were found to play a nutritional role in times of food shortage and not as much for their medicinal value. The study recommended the following interventions: Support for the elderly women in development and production practices, interventions to address factors affecting vegetable production, improving soil structure, working towards food self-sufficiency, moving away from dependence on mechanisation in rural farming.
- Full Text:
- Date Issued: 2017
Financial inclusion in South Africa
- Authors: Abrahams, Rayghana
- Date: 2017
- Subjects: Financial services industry -- South Africa , Financial institutions -- South Africa Finance -- South Africa South Africa -- Economic conditions
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/13579 , vital:27240
- Description: The research for this study was guided by the question on whether the financial inclusion improvement strategies of the South African government adequately address the financial inclusion targets, as set out in the National Development Plan. This descriptive non-empirical study was conducted by means of a literature review. The secondary data used for the study were collected from a number of sources, namely: (i) the 2015 Brookings Financial and Digital Inclusion Project report; (ii) the 2014 Global Findex survey; (iii) the InterMedia surveys; (iv) Financial Access surveys; (v) various national FinScope surveys; and (iv) a number of working papers of the World Bank related to financial inclusion. The data revealed that South Africa, with its sophisticated financial sector, was early to adopt policies and initiatives to advance financial inclusion and the country has experienced a noticeable increase in financial inclusion from 61% in 2004 to 87% in 2015. South Africa is 3% away from its National Development Plan goal of 90% financial inclusion by 2030. This indicates that overall, the financial inclusion initiatives adopted by the South African government were successful.
- Full Text:
- Date Issued: 2017
- Authors: Abrahams, Rayghana
- Date: 2017
- Subjects: Financial services industry -- South Africa , Financial institutions -- South Africa Finance -- South Africa South Africa -- Economic conditions
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/13579 , vital:27240
- Description: The research for this study was guided by the question on whether the financial inclusion improvement strategies of the South African government adequately address the financial inclusion targets, as set out in the National Development Plan. This descriptive non-empirical study was conducted by means of a literature review. The secondary data used for the study were collected from a number of sources, namely: (i) the 2015 Brookings Financial and Digital Inclusion Project report; (ii) the 2014 Global Findex survey; (iii) the InterMedia surveys; (iv) Financial Access surveys; (v) various national FinScope surveys; and (iv) a number of working papers of the World Bank related to financial inclusion. The data revealed that South Africa, with its sophisticated financial sector, was early to adopt policies and initiatives to advance financial inclusion and the country has experienced a noticeable increase in financial inclusion from 61% in 2004 to 87% in 2015. South Africa is 3% away from its National Development Plan goal of 90% financial inclusion by 2030. This indicates that overall, the financial inclusion initiatives adopted by the South African government were successful.
- Full Text:
- Date Issued: 2017
Governing information security within the context of "bring your own device" in small, medium and micro enterprises
- Authors: Fani, Noluvuyo
- Date: 2017
- Subjects: Data protection , Computer security -- Management , Computer networks -- Security measures
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/7626 , vital:22114
- Description: Throughout history, information has been core to the communication, processing and storage of most tasks in the organisation, in this case in Small-Medium and Micro Enterprises (SMMEs). The implementation of these tasks relies on Information and Communication Technology (ICT). ICT is constantly evolving, and with each developed ICT, it becomes important that organisations adapt to the changing environment. Organisations need to adapt to the changing environment by incorporating innovative ICT that allows employees to perform their tasks with ease anywhere and anytime, whilst reducing the costs affiliated with the ICT. In this modern, performing tasks with ease anywhere and anytime requires that the employee is mobile whilst using the ICT. As a result, a relatively new phenomenon called “Bring Your Own Device” (BYOD) is currently infiltrating most organisations, where personally-owned mobile devices are used to access organisational information that will be used to conduct the various tasks of the organisation. The use of BYOD in organisations breeds the previously mentioned benefits such as performing organisational tasks anywhere and anytime. However, with the benefits highlighted for BYOD, organisations should be aware that there are risks to the implementation of BYOD. Therefore, the implementation of BYOD deems that organisations should implement BYOD with proper management thereof.
- Full Text:
- Date Issued: 2017
- Authors: Fani, Noluvuyo
- Date: 2017
- Subjects: Data protection , Computer security -- Management , Computer networks -- Security measures
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/7626 , vital:22114
- Description: Throughout history, information has been core to the communication, processing and storage of most tasks in the organisation, in this case in Small-Medium and Micro Enterprises (SMMEs). The implementation of these tasks relies on Information and Communication Technology (ICT). ICT is constantly evolving, and with each developed ICT, it becomes important that organisations adapt to the changing environment. Organisations need to adapt to the changing environment by incorporating innovative ICT that allows employees to perform their tasks with ease anywhere and anytime, whilst reducing the costs affiliated with the ICT. In this modern, performing tasks with ease anywhere and anytime requires that the employee is mobile whilst using the ICT. As a result, a relatively new phenomenon called “Bring Your Own Device” (BYOD) is currently infiltrating most organisations, where personally-owned mobile devices are used to access organisational information that will be used to conduct the various tasks of the organisation. The use of BYOD in organisations breeds the previously mentioned benefits such as performing organisational tasks anywhere and anytime. However, with the benefits highlighted for BYOD, organisations should be aware that there are risks to the implementation of BYOD. Therefore, the implementation of BYOD deems that organisations should implement BYOD with proper management thereof.
- Full Text:
- Date Issued: 2017
Guidelines for secure cloud-based personal health records
- Authors: Mxoli, Ncedisa Avuya Mercia
- Date: 2017
- Subjects: Cloud computing -- Security measures , Computer security Data mining Medical records -- Data processing
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/14134 , vital:27433
- Description: Traditionally, health records have been stored in paper folders at the physician’s consulting rooms – or at the patient’s home. Some people stored the health records of their family members, so as to keep a running history of all the medical procedures they went through, and what medications they were given by different physicians at different stages of their lives. Technology has introduced better and safer ways of storing these records, namely, through the use of Personal Health Records (PHRs). With time, different types of PHRs have emerged, i.e. local, remote server-based, and hybrid PHRs. Web-based PHRs fall under the remote server-based PHRs; and recently, a new market in storing PHRs has emerged. Cloud computing has become a trend in storing PHRs in a more accessible and efficient manner. Despite its many benefits, cloud computing has many privacy and security concerns. As a result, the adoption rate of cloud services is not yet very high. A qualitative and exploratory research design approach was followed in this study, in order to reach the objective of proposing guidelines that could assist PHR providers in selecting a secure Cloud Service Provider (CSP) to store their customers’ health data. The research methods that were used include a literature review, systematic literature review, qualitative content analysis, reasoning, argumentation and elite interviews. A systematic literature review and qualitative content analysis were conducted to examine those risks in the cloud environment that could have a negative impact on the secure storing of PHRs. PHRs must satisfy certain dimensions, in order for them to be meaningful for use. While these were highlighted in the research, it also emerged that certain risks affect the PHR dimensions directly, thus threatening the meaningfulness and usability of cloud-based PHRs. The literature review revealed that specific control measures can be adopted to mitigate the identified risks. These control measures form part of the material used in this study to identify the guidelines for secure cloud-based PHRs. The guidelines were formulated through the use of reasoning and argumentation. After the guidelines were formulated, elite interviews were conducted, in order to validate and finalize the main research output: i.e. guidelines. The results of this study may alert PHR providers to the risks that exist in the cloud environment; so that they can make informed decisions when choosing a CSP for storing their customers’ health data.
- Full Text:
- Date Issued: 2017
- Authors: Mxoli, Ncedisa Avuya Mercia
- Date: 2017
- Subjects: Cloud computing -- Security measures , Computer security Data mining Medical records -- Data processing
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/14134 , vital:27433
- Description: Traditionally, health records have been stored in paper folders at the physician’s consulting rooms – or at the patient’s home. Some people stored the health records of their family members, so as to keep a running history of all the medical procedures they went through, and what medications they were given by different physicians at different stages of their lives. Technology has introduced better and safer ways of storing these records, namely, through the use of Personal Health Records (PHRs). With time, different types of PHRs have emerged, i.e. local, remote server-based, and hybrid PHRs. Web-based PHRs fall under the remote server-based PHRs; and recently, a new market in storing PHRs has emerged. Cloud computing has become a trend in storing PHRs in a more accessible and efficient manner. Despite its many benefits, cloud computing has many privacy and security concerns. As a result, the adoption rate of cloud services is not yet very high. A qualitative and exploratory research design approach was followed in this study, in order to reach the objective of proposing guidelines that could assist PHR providers in selecting a secure Cloud Service Provider (CSP) to store their customers’ health data. The research methods that were used include a literature review, systematic literature review, qualitative content analysis, reasoning, argumentation and elite interviews. A systematic literature review and qualitative content analysis were conducted to examine those risks in the cloud environment that could have a negative impact on the secure storing of PHRs. PHRs must satisfy certain dimensions, in order for them to be meaningful for use. While these were highlighted in the research, it also emerged that certain risks affect the PHR dimensions directly, thus threatening the meaningfulness and usability of cloud-based PHRs. The literature review revealed that specific control measures can be adopted to mitigate the identified risks. These control measures form part of the material used in this study to identify the guidelines for secure cloud-based PHRs. The guidelines were formulated through the use of reasoning and argumentation. After the guidelines were formulated, elite interviews were conducted, in order to validate and finalize the main research output: i.e. guidelines. The results of this study may alert PHR providers to the risks that exist in the cloud environment; so that they can make informed decisions when choosing a CSP for storing their customers’ health data.
- Full Text:
- Date Issued: 2017