- Title
- Design, implementation and evaluation of a directly water cooled photovoltaic- thermal system
- Creator
- Mtunzi, Busiso
- Subject
- Sensitivity analysis -- Photovoltaic thermal system (PV/T)
- Subject
- Solar utilization -- Carbon emission
- Date Issued
- 2013
- Date
- 2013
- Type
- Thesis
- Type
- Doctoral
- Type
- PhD (Physics)
- Identifier
- vital:11597
- Identifier
- http://hdl.handle.net/10353/d1016198
- Identifier
- Sensitivity analysis -- Photovoltaic thermal system (PV/T)
- Identifier
- Solar utilization -- Carbon emission
- Description
- This research project was based on the Design, Implementation and Evaluation of a Photovoltaic Water heating system in South Africa, Eastern Cape Province. The purpose of the study was to design and investigate the scientific and economic contribution of direct water cooling on the photovoltaic module. The method involved performance comparison of two photovoltaic modules, one naturally cooled (M1) and the other, direct water cooled module (M2). Module M2 was used to produce warm water and electricity, hence, a hybrid system. The study focused on comparing the modules’ efficiency, power output and their performance. The temperatures attained by water through cooling the module were monitored as well as the electrical energy generated. A data logger and a low cost I/V characteristic system were used for data collection for a full year. The data were then used for performance analysis of the modules. The results of the study revealed that the directly water cooled module could operate at a higher electrical efficiency for 87% of the day and initially produced 3.63% more electrical energy each day. This was found to be true for the first three months after installation. In the remaining months to the end of the year M2 was found to have more losses as compared to M1 as evidenced by the modules’ performance ratios. The directly water cooled module also showed an energy saving efficiency of 61%. A solar utilization of 47.93% was found for M2 while 8.77% was found for M1. Economically, the project was found to be viable and the payback period of the directly cooled module (M2) system was found to be 9.8 years. Energy economics showed that the system was more sensitive to the price changes and to the energy output as compared to other inputs such as operation and maintenance and years of operation. A generation cost of R0.84/kWh from the system was found and when compared to the potential revenue of R1.18 per kWh, the system was found to enable households to make a profit of 40.5 %. Use of such a system was also found to be able to contribute 9.55% towards carbon emission reduction each year. From these results, it was concluded that a directly cooled photovoltaic/thermal heating (PV/T) system is possible and that it can be of much help in terms of warm water and electricity provision.
- Format
- 188 leaves; 30 cm
- Format
- Publisher
- University of Fort Hare
- Publisher
- Faculty of Science & Agriculture
- Language
- English
- Rights
- University of Fort Hare
- Hits: 674
- Visitors: 802
- Downloads: 206
Collections
UFH Department of Physics
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | SOURCEPDF | 3 MB | Adobe Acrobat PDF | View Details Download |