Development of a numerical geohydrological model for a fractured rock aquifer in the Karoo, near Sutherland, South Africa
- Authors: Maqhubela, Akhona
- Date: 2024-04
- Subjects: Hydrogeology -- South Africa -- Northern Cape , Groundwater -- South Africa -- North Cape -- Management , Evapotranspiration
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64164 , vital:73658
- Description: The regional scale method in groundwater storage observation introduces uncertainties that hinder the evaluation of the remaining lifespan of depleted aquifers. The scarcity of precipitation data presents significant global challenge, especially in semi-arid regions. This study constructs a regional numerical hydrogeological model that identifies the potential impacts of climate change on the water balance for the South African Gravimetric Observation Station in Sutherland. The purpose of this study is to understand mechanisms controlling groundwater in the fractured rock aquifer. The climate data from the Weather forecast data over the last ten years was collected from the South African Weather Service. and groundwater levels data assessed the potential impacts of climate change on water balance components, especially precipitation and evapotranspiration. Precipitation is the primary recharge parameter in this study and had the highest level recorded in winter, with May having the highest precipitation rates of 24,62mm. The instrument conducted two profile investigations in a single day to detect geological abnormalities at various depths, achieving an impressive accuracy of up to 0.001 mV. The fact that groundwater flows from regions of higher hydraulic heads to areas of lower hydraulic charges, confirms that riverbeds in Sutherland act as preferential conduits for subsurface recharge. The profile and processed geophysical maps show low chances of getting groundwater in this observed area due to extensively great depth, approximately 150 – 210 m. The river package from MODFLOW model shows little inflow to the study nearby well locations. These model results showed a negative difference between water flowing in and out of the system of about -7m3 between 2002 and 2020. Groundwater flows faster at borehole five, where the hydraulic conductivity is large. The resulting regional hydrogeological model offered valuable insights into how climate change might influence the distribution and accessibility of groundwater resources. In the context of Sutherland, a negative groundwater budget value signaled that groundwater extraction or consumption surpassed the natural replenishment or recharge of the aquifer. , Thesis (MSc) -- Faculty of Science, School of Environmental Sciences, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Maqhubela, Akhona
- Date: 2024-04
- Subjects: Hydrogeology -- South Africa -- Northern Cape , Groundwater -- South Africa -- North Cape -- Management , Evapotranspiration
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64164 , vital:73658
- Description: The regional scale method in groundwater storage observation introduces uncertainties that hinder the evaluation of the remaining lifespan of depleted aquifers. The scarcity of precipitation data presents significant global challenge, especially in semi-arid regions. This study constructs a regional numerical hydrogeological model that identifies the potential impacts of climate change on the water balance for the South African Gravimetric Observation Station in Sutherland. The purpose of this study is to understand mechanisms controlling groundwater in the fractured rock aquifer. The climate data from the Weather forecast data over the last ten years was collected from the South African Weather Service. and groundwater levels data assessed the potential impacts of climate change on water balance components, especially precipitation and evapotranspiration. Precipitation is the primary recharge parameter in this study and had the highest level recorded in winter, with May having the highest precipitation rates of 24,62mm. The instrument conducted two profile investigations in a single day to detect geological abnormalities at various depths, achieving an impressive accuracy of up to 0.001 mV. The fact that groundwater flows from regions of higher hydraulic heads to areas of lower hydraulic charges, confirms that riverbeds in Sutherland act as preferential conduits for subsurface recharge. The profile and processed geophysical maps show low chances of getting groundwater in this observed area due to extensively great depth, approximately 150 – 210 m. The river package from MODFLOW model shows little inflow to the study nearby well locations. These model results showed a negative difference between water flowing in and out of the system of about -7m3 between 2002 and 2020. Groundwater flows faster at borehole five, where the hydraulic conductivity is large. The resulting regional hydrogeological model offered valuable insights into how climate change might influence the distribution and accessibility of groundwater resources. In the context of Sutherland, a negative groundwater budget value signaled that groundwater extraction or consumption surpassed the natural replenishment or recharge of the aquifer. , Thesis (MSc) -- Faculty of Science, School of Environmental Sciences, 2024
- Full Text:
- Date Issued: 2024-04
Development of a numerical geohydrological model for a fractured rock aquifer in the Karoo, near Sutherland, South Africa
- Authors: Maqhubela, Akhona
- Date: 2024-04
- Subjects: Groundwater -- South Africa -- Northern Cape , Hydrogeology -- South Africa -- Northern Cape , Remote sensing , Geographic information systems
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64163 , vital:73659
- Description: The regional scale method in groundwater storage observation introduces uncertainties that hinder the evaluation of the remaining lifespan of depleted aquifers. The scarcity of precipitation data presents significant global challenge, especially in semi-arid regions. This study constructs a regional numerical hydrogeological model that identifies the potential impacts of climate change on the water balance for the South African Gravimetric Observation Station in Sutherland. The purpose of this study is to understand mechanisms controlling groundwater in the fractured rock aquifer. The climate data from the Weather forecast data over the last ten years was collected from the South African Weather Service. and groundwater levels data assessed the potential impacts of climate change on water balance components, especially precipitation and evapotranspiration. Precipitation is the primary recharge parameter in this study and had the highest level recorded in winter, with May having the highest precipitation rates of 24,62mm. The instrument conducted two profile investigations in a single day to detect geological abnormalities at various depths, achieving an impressive accuracy of up to 0.001 mV. The fact that groundwater flows from regions of higher hydraulic heads to areas of lower hydraulic charges, confirms that riverbeds in Sutherland act as preferential conduits for subsurface recharge. The profile and processed geophysical maps show low chances of getting groundwater in this observed area due to extensively great depth, approximately 150 – 210 m. The river package from MODFLOW model shows little inflow to the study nearby well locations. These model results showed a negative difference between water flowing in and out of the system of about -7m3 between 2002 and 2020. Groundwater flows faster at borehole five, where the hydraulic conductivity is large. The resulting regional hydrogeological model offered valuable insights into how climate change might influence the distribution and accessibility of groundwater resources. In the context of Sutherland, a negative groundwater budget value signaled that groundwater extraction or consumption surpassed the natural replenishment or recharge of the aquifer. , Thesis (MSc) -- Faculty of Science, School of Environmental Sciences, 2022
- Full Text:
- Date Issued: 2024-04
- Authors: Maqhubela, Akhona
- Date: 2024-04
- Subjects: Groundwater -- South Africa -- Northern Cape , Hydrogeology -- South Africa -- Northern Cape , Remote sensing , Geographic information systems
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64163 , vital:73659
- Description: The regional scale method in groundwater storage observation introduces uncertainties that hinder the evaluation of the remaining lifespan of depleted aquifers. The scarcity of precipitation data presents significant global challenge, especially in semi-arid regions. This study constructs a regional numerical hydrogeological model that identifies the potential impacts of climate change on the water balance for the South African Gravimetric Observation Station in Sutherland. The purpose of this study is to understand mechanisms controlling groundwater in the fractured rock aquifer. The climate data from the Weather forecast data over the last ten years was collected from the South African Weather Service. and groundwater levels data assessed the potential impacts of climate change on water balance components, especially precipitation and evapotranspiration. Precipitation is the primary recharge parameter in this study and had the highest level recorded in winter, with May having the highest precipitation rates of 24,62mm. The instrument conducted two profile investigations in a single day to detect geological abnormalities at various depths, achieving an impressive accuracy of up to 0.001 mV. The fact that groundwater flows from regions of higher hydraulic heads to areas of lower hydraulic charges, confirms that riverbeds in Sutherland act as preferential conduits for subsurface recharge. The profile and processed geophysical maps show low chances of getting groundwater in this observed area due to extensively great depth, approximately 150 – 210 m. The river package from MODFLOW model shows little inflow to the study nearby well locations. These model results showed a negative difference between water flowing in and out of the system of about -7m3 between 2002 and 2020. Groundwater flows faster at borehole five, where the hydraulic conductivity is large. The resulting regional hydrogeological model offered valuable insights into how climate change might influence the distribution and accessibility of groundwater resources. In the context of Sutherland, a negative groundwater budget value signaled that groundwater extraction or consumption surpassed the natural replenishment or recharge of the aquifer. , Thesis (MSc) -- Faculty of Science, School of Environmental Sciences, 2022
- Full Text:
- Date Issued: 2024-04
Development of the Zirconium-based metal- organic framework UiO-66 for Adsorption-mediated electrochemical sensing of organonitrogen compounds in fuels
- Authors: Mokgohloa, Mathule Collen
- Date: 2024-04
- Subjects: Electrochemical sensors , Quinoline -- synthesis , Pyridine -- Synthesis
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64193 , vital:73663
- Description: The combustion of fuel which contains organonitrogen compounds has led to an increase in atmospheric and environmental levels of nitrogen oxides which are responsible for several environmental, ecological, and human health problems. With increasingly strict environmental regulations and deleterious effects of the nitrogen-containing compounds in fuels, there is a strong need for the removal and detection of nitrogen-containing compounds in fuels to produce fuels with lower levels of nitrogen compounds. The Environmental Protection Agency (EPA) mandated nitrogen content in fossil fuels to be about less than 1 wt%. The existing analytical techniques used for the quantification of nitrogen-containing compounds in fuels include GC-MS, GC-AED, and spectrophotometry. Despite being sensitive and specific, these methods require expensive equipment, highly trained personnel, and time-consuming pre-treatment methods to avoid interferences from similar compounds, and they suffer from analyte loss and inadequate results. Thus, they can only be carried out in the off-site laboratories, hindering them from rapid on-site screening. The metal-organic framework (MOF) UiO-66-NH2 and its composites UiO-66-NH2/GA, and UiO- 66-NH2/GO-NH2 (GA= Graphene aerosol and GO= Graphene oxide) have shown great potentialin the adsorption of organonitrogen compounds like quinoline. However, research in the electrochemical application of these MOFs and their derivatives is limited despite their high surface area, abundant porosity, and increased conductivity. To demonstrate their electrochemical sensing potential, modification of the glassy carbon electrode (GCE) was suggested, which would show a higher degree of association for pyridine and quinoline on modified UiO-66-NH2/GA and UiO-66-NH2/GO-NH2 surfaces, thereby creating a more favourable route for adsorption. This would result in enhanced sensing of pyridine and quinoline in model fuel. Thus, unlike the bare GCE, the fabricated/modified can selectively detect high levels of organonitrogen compounds. In this study, Chapter 3, UiO-66-NH2/GA and UiO-66-NH2/GO-NH2 are prepared via the solvothermal method and then characterized using various spectroscopic and imaging techniques such as Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS), Ultraviolet-Visible Spectroscopy (UV-VIS), Thermogravimetric Analysis (TGA), X-ray Development of the Zirconium-based metal- organic framework UiO-66 for Adsorption-mediated electrochemical sensing of organonitrogen compounds in fuels. , Thesis (MSc) -- Faculty of Science, School of Biomolecular & Chemical Sciences, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Mokgohloa, Mathule Collen
- Date: 2024-04
- Subjects: Electrochemical sensors , Quinoline -- synthesis , Pyridine -- Synthesis
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64193 , vital:73663
- Description: The combustion of fuel which contains organonitrogen compounds has led to an increase in atmospheric and environmental levels of nitrogen oxides which are responsible for several environmental, ecological, and human health problems. With increasingly strict environmental regulations and deleterious effects of the nitrogen-containing compounds in fuels, there is a strong need for the removal and detection of nitrogen-containing compounds in fuels to produce fuels with lower levels of nitrogen compounds. The Environmental Protection Agency (EPA) mandated nitrogen content in fossil fuels to be about less than 1 wt%. The existing analytical techniques used for the quantification of nitrogen-containing compounds in fuels include GC-MS, GC-AED, and spectrophotometry. Despite being sensitive and specific, these methods require expensive equipment, highly trained personnel, and time-consuming pre-treatment methods to avoid interferences from similar compounds, and they suffer from analyte loss and inadequate results. Thus, they can only be carried out in the off-site laboratories, hindering them from rapid on-site screening. The metal-organic framework (MOF) UiO-66-NH2 and its composites UiO-66-NH2/GA, and UiO- 66-NH2/GO-NH2 (GA= Graphene aerosol and GO= Graphene oxide) have shown great potentialin the adsorption of organonitrogen compounds like quinoline. However, research in the electrochemical application of these MOFs and their derivatives is limited despite their high surface area, abundant porosity, and increased conductivity. To demonstrate their electrochemical sensing potential, modification of the glassy carbon electrode (GCE) was suggested, which would show a higher degree of association for pyridine and quinoline on modified UiO-66-NH2/GA and UiO-66-NH2/GO-NH2 surfaces, thereby creating a more favourable route for adsorption. This would result in enhanced sensing of pyridine and quinoline in model fuel. Thus, unlike the bare GCE, the fabricated/modified can selectively detect high levels of organonitrogen compounds. In this study, Chapter 3, UiO-66-NH2/GA and UiO-66-NH2/GO-NH2 are prepared via the solvothermal method and then characterized using various spectroscopic and imaging techniques such as Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS), Ultraviolet-Visible Spectroscopy (UV-VIS), Thermogravimetric Analysis (TGA), X-ray Development of the Zirconium-based metal- organic framework UiO-66 for Adsorption-mediated electrochemical sensing of organonitrogen compounds in fuels. , Thesis (MSc) -- Faculty of Science, School of Biomolecular & Chemical Sciences, 2024
- Full Text:
- Date Issued: 2024-04
Development of TiO2 nanostructures with a modified energy band gap for hydrogen extraction
- Authors: Mutubuki, Arnold
- Date: 2024-04
- Subjects: Nanostructures , Nanoscience , Nanochemistry
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64226 , vital:73666
- Description: A rise in fossil fuel depletion has motivated the research towards alternative, cost effective and clean processes for energy production through renewable sources. The scientific community is currently engaged in extensive research to exploit viable, sustainable methods for generating green hydrogen. Titania (TiO2) is historically the most studied photoactive semiconductor material with great potential in photoelectrochemical water splitting (PECWS), following the discovery by Fujishima and Honda in 1972. TiO2 possesses superior physicochemical characteristics and band gap edges, which enables the semiconductor to effectively facilitate the PECWS process. Efforts are still ongoing to explore alternatives for narrowing the optical band gap energy of TiO2, for an efficient photoelectrode. In this research work, open-ended and well-ordered TiO2 nanotubular arrays were synthesised by a three-step anodization process. The third anodization was crucial to detach the TiO2 thin film from an opaque Ti metal substrate. The free-standing thin films were transferred and pasted onto conductive FTO-coated glass substrates transparent to visible light and annealed at 400 ℃ for crystallisation. The multi-step anodization has shown an improved top tube morphology by eliminating an initiation TiO2 mesh formed when a conventional single-step anodization process is used under similar conditions. To widen the absorption range of the samples, CuO nanosheets were deposited onto nanotubular TiO2/FTO films through successive ionic layer adsorption (SILAR), a wet chemical method. The formation of a CuO/TiO2 nanostructure enhances the transfer of photogenerated carriers, suppressing charge recombination. This research focused on investigating the influence of selected SILAR parameters on the formation of CuO nanostructures. The first was the effect of precursor concentration on the structural, morphological and optical properties of the CuO/TiO2/FTO nanostructured photoelectrode. The effect of the precursor concentration on the structure and morphology was evident in the X-ray diffraction (XRD) patterns and scanning electron microscopy (SEM) micrographs. Crystallite sizes of deposited CuO increased from 10.6 nm to 15.7 nm when precursor concentration was varied from 0.02 M to 0.10 M. The UV-visible absorbance results show that an increase in precursor concentration leads to a red shift of both the peak absorbance and edge wavelength of the CuO/TiO2/FTO absorbance spectra. This phenomenon is believed to be caused by the presence of CuO, which exhibits active absorption in the visible spectrum. As evidenced by the study, the continued increase in precursor concentration does not result in a further widening of the absorption band. This is demonstrated by the example of a CuO/TiO2/FTO sample decorated with a 0.2 M precursor. The second was the effect of SILAR immersion cycles on the properties of the CuO/TiO2/FTO nanostructure developed. The increase in the number of immersion cycles led to a notable progression in the adsorption cupric oxide on the TiO2/FTO samples. A redshift in the absorbance peak and edge wavelength is observed in the UV-visible spectra of CuO/TiO2/FTO photoelectrode. The efficacy of the SILAR technique in modifying the absorption band of nanotubular TiO2 thin films has been conclusively demonstrated through comprehensive analysis and correlation of the relationships between the structure and optical properties, as evidenced by the XRD patterns, Raman spectra, SEM, TEM micrographs, and UV-visible absorbance spectra. , Thesis (MSc) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Mutubuki, Arnold
- Date: 2024-04
- Subjects: Nanostructures , Nanoscience , Nanochemistry
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64226 , vital:73666
- Description: A rise in fossil fuel depletion has motivated the research towards alternative, cost effective and clean processes for energy production through renewable sources. The scientific community is currently engaged in extensive research to exploit viable, sustainable methods for generating green hydrogen. Titania (TiO2) is historically the most studied photoactive semiconductor material with great potential in photoelectrochemical water splitting (PECWS), following the discovery by Fujishima and Honda in 1972. TiO2 possesses superior physicochemical characteristics and band gap edges, which enables the semiconductor to effectively facilitate the PECWS process. Efforts are still ongoing to explore alternatives for narrowing the optical band gap energy of TiO2, for an efficient photoelectrode. In this research work, open-ended and well-ordered TiO2 nanotubular arrays were synthesised by a three-step anodization process. The third anodization was crucial to detach the TiO2 thin film from an opaque Ti metal substrate. The free-standing thin films were transferred and pasted onto conductive FTO-coated glass substrates transparent to visible light and annealed at 400 ℃ for crystallisation. The multi-step anodization has shown an improved top tube morphology by eliminating an initiation TiO2 mesh formed when a conventional single-step anodization process is used under similar conditions. To widen the absorption range of the samples, CuO nanosheets were deposited onto nanotubular TiO2/FTO films through successive ionic layer adsorption (SILAR), a wet chemical method. The formation of a CuO/TiO2 nanostructure enhances the transfer of photogenerated carriers, suppressing charge recombination. This research focused on investigating the influence of selected SILAR parameters on the formation of CuO nanostructures. The first was the effect of precursor concentration on the structural, morphological and optical properties of the CuO/TiO2/FTO nanostructured photoelectrode. The effect of the precursor concentration on the structure and morphology was evident in the X-ray diffraction (XRD) patterns and scanning electron microscopy (SEM) micrographs. Crystallite sizes of deposited CuO increased from 10.6 nm to 15.7 nm when precursor concentration was varied from 0.02 M to 0.10 M. The UV-visible absorbance results show that an increase in precursor concentration leads to a red shift of both the peak absorbance and edge wavelength of the CuO/TiO2/FTO absorbance spectra. This phenomenon is believed to be caused by the presence of CuO, which exhibits active absorption in the visible spectrum. As evidenced by the study, the continued increase in precursor concentration does not result in a further widening of the absorption band. This is demonstrated by the example of a CuO/TiO2/FTO sample decorated with a 0.2 M precursor. The second was the effect of SILAR immersion cycles on the properties of the CuO/TiO2/FTO nanostructure developed. The increase in the number of immersion cycles led to a notable progression in the adsorption cupric oxide on the TiO2/FTO samples. A redshift in the absorbance peak and edge wavelength is observed in the UV-visible spectra of CuO/TiO2/FTO photoelectrode. The efficacy of the SILAR technique in modifying the absorption band of nanotubular TiO2 thin films has been conclusively demonstrated through comprehensive analysis and correlation of the relationships between the structure and optical properties, as evidenced by the XRD patterns, Raman spectra, SEM, TEM micrographs, and UV-visible absorbance spectra. , Thesis (MSc) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2024
- Full Text:
- Date Issued: 2024-04
Diaspora in Dialogue: An Ontology of Diasporic Subjectivity in the Work of Three Artists Living In-Between South Africa and Zimbabwe
- Nyoni, Vulindlela Philani Elliott
- Authors: Nyoni, Vulindlela Philani Elliott
- Date: 2024-04
- Subjects: Foreign workers -- South Africa , South Africa -- Social conditions , South Africa -- Emigration and immigration
- Language: English
- Type: Doctorate , text
- Identifier: http://hdl.handle.net/10948/62366 , vital:72615
- Description: As a Zimbabwean artist and educator, living and working in South Africa, my daily experience is that of an “in-between” diasporic subjectivity, which is compounded by the discourses around the uneasy reintegration of post-apartheid South Africa into Africa. This context gives rise to the core philosophical aim of this thesis, which is to explore the notion of “diasporic subjectivities” as a philosophical approach to understanding what it means to be in a complex contemporary reality. The notion of diasporic subjectivities works in the same way as that of “queer subjectivities”, which has been used to understand not just gay people but all people. “Diaspora” names people who have moved, migrated, or been scattered away from an established or ancestral homeland, but retain some sense of belonging to this homeland. From an African perspective, I problematise the concept of an established homeland and the settled subjectivities that belong to it, in contrast to which only the diaspora remains in an uncomfortable state of in-betweenness. Instead, I explore a contention among both European and African existentialist philosophers that the condition of not being at home is the fundamental human condition out of which a home must be created. This would mean that the groundlessness, liminality or in-betweenness of being is experienced not just by the diaspora but by all humans. However, importantly, I find that sociocultural differences due to the history of colonialism gives rise to different experiences of homelessness and the groundlessness of being. This makes a distinction necessary, but to avoid the pitfalls of tying this distinction to geographical locations such as Western versus Non-Western or Global North and Global South, I will refer instead to spaces, practices and even individuals, in which there are “mindsets of entitlement” versus “mindsets of disentitlement”. The former refers to the mindset of ownership characteristic of the settled and developed. The latter refers to the mindset of many who feel a sense of unbelonging, due to disenfranchisement and forced disembodiment and dislocation. I have aimed to support the thesis that the groundlessness, liminality or in-betweenness of being is experienced not just by the diaspora but by all humans, in two ways. Firstly, I consider in detail through various means (narratives, personal reflection, investigation of philosophical texts, dialogues), the philosophical concepts of “belonging”, “home” and “nostalgia” as component aspects of an ontology of diasporic subjectivity. In the second part of this study, I engage in an interpretative process, as outlined by Hans-Georg Gadamer, whereby I use this ontology to help me dialogue with artworks produced by three Zimbabwean artists, Ronald Muchatuta, Gerald Machona, and myself (Vulindlela Nyoni), who share the diasporic condition of being Zimbabweans living in-between Zimbabwe and South Africa. The ontology of diasporic subjectivity developed in the first part offers a language with which to dialogue with the artworks or question the way in which the complexities of belonging, home and nostalgia are expressed in the works, while the works in turn help deepen an understanding of diasporic subjectivity. Both philosophies and artworks may function as transformative, practical tools for seeking wisdom, cultivating self-awareness, developing moral character, and living a reflective and examined life. The combination of personal narratives and self-reflexive, philosophical dialogues regarding artworks and art making and its exigencies holds the potential to produce deeper philosophical insights into the fundamentally diasporic human condition. This kind of hybrid research at the interface between philosophy and artistic praxis is accessible to a broad-based audience. It is therefore better able to undo malicious stereotypical associations between émigrés and malignant tropes of societal decay on the African continent and to validate the contributions made by African diaspora to the decolonial project, than neatly distanced academic reflections, which reduce the philosophical impact of transnational migration to measurable motivations and statistics. , Thesis (D.Phil) -- Faculty of Humanities, School of Social Scinces, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Nyoni, Vulindlela Philani Elliott
- Date: 2024-04
- Subjects: Foreign workers -- South Africa , South Africa -- Social conditions , South Africa -- Emigration and immigration
- Language: English
- Type: Doctorate , text
- Identifier: http://hdl.handle.net/10948/62366 , vital:72615
- Description: As a Zimbabwean artist and educator, living and working in South Africa, my daily experience is that of an “in-between” diasporic subjectivity, which is compounded by the discourses around the uneasy reintegration of post-apartheid South Africa into Africa. This context gives rise to the core philosophical aim of this thesis, which is to explore the notion of “diasporic subjectivities” as a philosophical approach to understanding what it means to be in a complex contemporary reality. The notion of diasporic subjectivities works in the same way as that of “queer subjectivities”, which has been used to understand not just gay people but all people. “Diaspora” names people who have moved, migrated, or been scattered away from an established or ancestral homeland, but retain some sense of belonging to this homeland. From an African perspective, I problematise the concept of an established homeland and the settled subjectivities that belong to it, in contrast to which only the diaspora remains in an uncomfortable state of in-betweenness. Instead, I explore a contention among both European and African existentialist philosophers that the condition of not being at home is the fundamental human condition out of which a home must be created. This would mean that the groundlessness, liminality or in-betweenness of being is experienced not just by the diaspora but by all humans. However, importantly, I find that sociocultural differences due to the history of colonialism gives rise to different experiences of homelessness and the groundlessness of being. This makes a distinction necessary, but to avoid the pitfalls of tying this distinction to geographical locations such as Western versus Non-Western or Global North and Global South, I will refer instead to spaces, practices and even individuals, in which there are “mindsets of entitlement” versus “mindsets of disentitlement”. The former refers to the mindset of ownership characteristic of the settled and developed. The latter refers to the mindset of many who feel a sense of unbelonging, due to disenfranchisement and forced disembodiment and dislocation. I have aimed to support the thesis that the groundlessness, liminality or in-betweenness of being is experienced not just by the diaspora but by all humans, in two ways. Firstly, I consider in detail through various means (narratives, personal reflection, investigation of philosophical texts, dialogues), the philosophical concepts of “belonging”, “home” and “nostalgia” as component aspects of an ontology of diasporic subjectivity. In the second part of this study, I engage in an interpretative process, as outlined by Hans-Georg Gadamer, whereby I use this ontology to help me dialogue with artworks produced by three Zimbabwean artists, Ronald Muchatuta, Gerald Machona, and myself (Vulindlela Nyoni), who share the diasporic condition of being Zimbabweans living in-between Zimbabwe and South Africa. The ontology of diasporic subjectivity developed in the first part offers a language with which to dialogue with the artworks or question the way in which the complexities of belonging, home and nostalgia are expressed in the works, while the works in turn help deepen an understanding of diasporic subjectivity. Both philosophies and artworks may function as transformative, practical tools for seeking wisdom, cultivating self-awareness, developing moral character, and living a reflective and examined life. The combination of personal narratives and self-reflexive, philosophical dialogues regarding artworks and art making and its exigencies holds the potential to produce deeper philosophical insights into the fundamentally diasporic human condition. This kind of hybrid research at the interface between philosophy and artistic praxis is accessible to a broad-based audience. It is therefore better able to undo malicious stereotypical associations between émigrés and malignant tropes of societal decay on the African continent and to validate the contributions made by African diaspora to the decolonial project, than neatly distanced academic reflections, which reduce the philosophical impact of transnational migration to measurable motivations and statistics. , Thesis (D.Phil) -- Faculty of Humanities, School of Social Scinces, 2024
- Full Text:
- Date Issued: 2024-04
Discipline and dismissal of employees For testing positive for cannabis
- Authors: Syce, Donato Burchelle
- Date: 2024-04
- Subjects: Occupational health , Cannabis , Substance use
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/63071 , vital:73184
- Description: Employers are legally obligated to provide a safe working environment for all employees. They are permitted to enforce rules that regulate the use of cannabis, including a total prohibition thereof in the workplace. Most employers adopt a policy with a zero-tolerance approach to substance abuse in the workplace, especially considering the negative effects of substances. Cannabis is regarded as a drug and the effects of cannabis may negatively affect the health of employees. In most instances, users develop cognitive impairment which may result in decreased working memory function. Therefore, employers must test employees when they suspect that an employee have contravened a workplace policy. There are various tests that can be used to detect THC, the preferred method for testing employees is a urine test. Upon testing an employee, the test may show a positive result for the previous use of cannabis, but it does not determine the level of impairment. However, employers are still required to take the necessary disciplinary action against employees. In the following chapter, I shall discuss the judicial approach towards employees who have tested positive for cannabis. , Thesis (LLM) -- Faculty of Law,(2024)
- Full Text:
- Date Issued: 2024-04
- Authors: Syce, Donato Burchelle
- Date: 2024-04
- Subjects: Occupational health , Cannabis , Substance use
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/63071 , vital:73184
- Description: Employers are legally obligated to provide a safe working environment for all employees. They are permitted to enforce rules that regulate the use of cannabis, including a total prohibition thereof in the workplace. Most employers adopt a policy with a zero-tolerance approach to substance abuse in the workplace, especially considering the negative effects of substances. Cannabis is regarded as a drug and the effects of cannabis may negatively affect the health of employees. In most instances, users develop cognitive impairment which may result in decreased working memory function. Therefore, employers must test employees when they suspect that an employee have contravened a workplace policy. There are various tests that can be used to detect THC, the preferred method for testing employees is a urine test. Upon testing an employee, the test may show a positive result for the previous use of cannabis, but it does not determine the level of impairment. However, employers are still required to take the necessary disciplinary action against employees. In the following chapter, I shall discuss the judicial approach towards employees who have tested positive for cannabis. , Thesis (LLM) -- Faculty of Law,(2024)
- Full Text:
- Date Issued: 2024-04
Dislocation imaging of AISI316L stainless steels using electron channeling contrast imaging (ECCI)
- Pullen, Luchian Charton Morne
- Authors: Pullen, Luchian Charton Morne
- Date: 2024-04
- Subjects: Electron microscopy , Microscopy -- Technique
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64301 , vital:73674
- Description: This study investigates the use of electron microscopy to image dislocations in high-temperature steels used in the electrical power generation industry. Dislocations play an important role in the mechanical properties of steels, which continuously evolve during component manufacturing and subsequent in-service exposure due to creep and/or fatigue. The dislocation density of the steels can potentially be used as a fingerprint to identify at-risk components that has either reached end-of-life or that was incorrectly manufactured due to forming or heat treatments. Traditionally, dislocation measurements are performed using transmission electron microscopy (TEM) performed on thin foils samples. However, accurate and precise measurements of the dislocation density in steels using TEM remain a challenge due to the time-consuming nature, small sampling volumes, and effects of sample preparation on the quantitative results. The aim of this study is to evaluate and establish electron channeling contrast imaging (ECCI) as a scanning electron microscopy method of quantifying the dislocation densities of power plant steels. This method can be applied to conventionally polished bulk samples allowing for large areas to be sampled. Samples consisting of AISI316L stainless steel were used as a model alloy (large grain size ~100 μm) to compare dislocation imaging using annular dark field (ADF)-scanning TEM (STEM) and ECCI. Three materials states consisting of a cold drawn rod (high dislocation density), annealed rod (low dislocation density), and an annealed sample subjected to cyclic fatigue testing (medium dislocation density) were investigated. Systematic investigations into the data acquisition parameters showed that an incident beam energy (20 kV), beam current (~4 nA), pixel size (5 nm), and working distance (4-5 mm) on a JEOL7001F SEM fitted with a retractable BSE detector could successfully image the dislocation structures for the material states used in this study. The ECCI technique was successfully used to determine the dislocation density in the three material states and the quantitative results showed similar trends as the ADF-STEM quantification results, but with less effort. Future studies using electron backscattered diffraction (EBSD) orientation mapping combined with electron channeling pattern (ECP) calibrations using a single crystal Si sample will allow for ECCI imaging under controlled grain orientations. Furthermore, accurate image segmentation of dislocations from a micrograph remains a key limitation, which can be improved with the use of advanced image analysis based on deep learning approaches. The quantitative dislocation density techniques demonstrated in this study can be adapted not only for studies of other power plant steels (eg. 9-12% Cr Creep Strength Enhanced Ferritic) but also to other materials systems such as aluminium to study the recrystallization processes during annealing. , Thesis (MSc) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2025
- Full Text:
- Date Issued: 2024-04
- Authors: Pullen, Luchian Charton Morne
- Date: 2024-04
- Subjects: Electron microscopy , Microscopy -- Technique
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64301 , vital:73674
- Description: This study investigates the use of electron microscopy to image dislocations in high-temperature steels used in the electrical power generation industry. Dislocations play an important role in the mechanical properties of steels, which continuously evolve during component manufacturing and subsequent in-service exposure due to creep and/or fatigue. The dislocation density of the steels can potentially be used as a fingerprint to identify at-risk components that has either reached end-of-life or that was incorrectly manufactured due to forming or heat treatments. Traditionally, dislocation measurements are performed using transmission electron microscopy (TEM) performed on thin foils samples. However, accurate and precise measurements of the dislocation density in steels using TEM remain a challenge due to the time-consuming nature, small sampling volumes, and effects of sample preparation on the quantitative results. The aim of this study is to evaluate and establish electron channeling contrast imaging (ECCI) as a scanning electron microscopy method of quantifying the dislocation densities of power plant steels. This method can be applied to conventionally polished bulk samples allowing for large areas to be sampled. Samples consisting of AISI316L stainless steel were used as a model alloy (large grain size ~100 μm) to compare dislocation imaging using annular dark field (ADF)-scanning TEM (STEM) and ECCI. Three materials states consisting of a cold drawn rod (high dislocation density), annealed rod (low dislocation density), and an annealed sample subjected to cyclic fatigue testing (medium dislocation density) were investigated. Systematic investigations into the data acquisition parameters showed that an incident beam energy (20 kV), beam current (~4 nA), pixel size (5 nm), and working distance (4-5 mm) on a JEOL7001F SEM fitted with a retractable BSE detector could successfully image the dislocation structures for the material states used in this study. The ECCI technique was successfully used to determine the dislocation density in the three material states and the quantitative results showed similar trends as the ADF-STEM quantification results, but with less effort. Future studies using electron backscattered diffraction (EBSD) orientation mapping combined with electron channeling pattern (ECP) calibrations using a single crystal Si sample will allow for ECCI imaging under controlled grain orientations. Furthermore, accurate image segmentation of dislocations from a micrograph remains a key limitation, which can be improved with the use of advanced image analysis based on deep learning approaches. The quantitative dislocation density techniques demonstrated in this study can be adapted not only for studies of other power plant steels (eg. 9-12% Cr Creep Strength Enhanced Ferritic) but also to other materials systems such as aluminium to study the recrystallization processes during annealing. , Thesis (MSc) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2025
- Full Text:
- Date Issued: 2024-04
Early screening for the post intensive care syndrome in a tertiary ICU follow-up clinic in the Eastern Cape
- Authors: van der Merwe, Elizabeth
- Date: 2024-04
- Subjects: Critical care medicine , Post-traumatic stress disorder -- Patients , Psychology, Pathological
- Language: English
- Type: Doctral theses , text
- Identifier: http://hdl.handle.net/10948/63915 , vital:73626
- Description: The Post ICU Syndrome (PICS) is defined as a constellation of new or worsened impairments in physical, cognitive, and/or psychological health which persist after critical care discharge. These deficits are more related to the patients’ intensive care unit (ICU) stay rather than to their original ICU admission diagnosis. Between 25-50% of critical care survivors suffer from PICS. There is a paucity of research on PICS in South Africa (SA). The primary objective of this study is to describe the incidence and co-occurrence of PICS symptoms, as well as the changes in instrumental activities of daily living and life roles in ICU survivors.The study was conducted in a multidisciplinary tertiary ICU in the Eastern Cape. Inclusion criteria were respiratory support for ≥ 48 hours, or a shocked state, and/or organ failure requiring ICU stay for 48 hours. Patients were assessed at six weeks and six months after hospital discharge. Physical impairment was measured by the six-minute walk test and ICU-acquired weakness by the Medical Research Council scale. Instrumental activities of daily living score and employment/educational status were determined. The Hospital Anxiety and Depression Scale and Impact of Event Scale-Revised questionnaires were used as screening tools for significant psychological symptoms. Screening for neurocognitive impairment was performed with the NeuroScreen application and compared to a matched control group. The Short Form-36 Health-Related Quality of Life questionnaire (HRQOL) was used to determine quality of life at baseline and study visits. 107 patients, half of whom had COVID-19, completed the six-month follow-up. Six months after hospital discharge, six out of ten patients were affected by PICS, five out of every ten suffered from physical impairment, four out of every ten reported significant psychological symptoms, with three out of every ten affected by both. Three out of ten experienced significant chronic pain. Overall, six out of every ten patients experienced significant psychological symptoms at either one or both study visits. Only one in ten had psychological symptoms in isolation at six months. Six out of every ten patients reported a significantly lower health-related quality of life at six months as compared to their baseline. Three out of every ten patients had not returned to their previous remunerative work, studying or home making. Neurocognitive impairment in this cohort was not verified, and this may have been due to the selection of the control group. However, there was a significant improvement in neurocognitive functioning from the six-week to the six-month study visits. Only 15% of patients received rehabilitation therapy after hospital discharge. Female sex, a higher co-morbidity score and an admission diagnosis of trauma were predictors of PICS symptoms. COVID-19 was not found to be associated with a higher incidence of PICS. , Thesis (D.Phil) -- Faculty of Health Science, School of Behavioural & Lifestyle Sciences, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: van der Merwe, Elizabeth
- Date: 2024-04
- Subjects: Critical care medicine , Post-traumatic stress disorder -- Patients , Psychology, Pathological
- Language: English
- Type: Doctral theses , text
- Identifier: http://hdl.handle.net/10948/63915 , vital:73626
- Description: The Post ICU Syndrome (PICS) is defined as a constellation of new or worsened impairments in physical, cognitive, and/or psychological health which persist after critical care discharge. These deficits are more related to the patients’ intensive care unit (ICU) stay rather than to their original ICU admission diagnosis. Between 25-50% of critical care survivors suffer from PICS. There is a paucity of research on PICS in South Africa (SA). The primary objective of this study is to describe the incidence and co-occurrence of PICS symptoms, as well as the changes in instrumental activities of daily living and life roles in ICU survivors.The study was conducted in a multidisciplinary tertiary ICU in the Eastern Cape. Inclusion criteria were respiratory support for ≥ 48 hours, or a shocked state, and/or organ failure requiring ICU stay for 48 hours. Patients were assessed at six weeks and six months after hospital discharge. Physical impairment was measured by the six-minute walk test and ICU-acquired weakness by the Medical Research Council scale. Instrumental activities of daily living score and employment/educational status were determined. The Hospital Anxiety and Depression Scale and Impact of Event Scale-Revised questionnaires were used as screening tools for significant psychological symptoms. Screening for neurocognitive impairment was performed with the NeuroScreen application and compared to a matched control group. The Short Form-36 Health-Related Quality of Life questionnaire (HRQOL) was used to determine quality of life at baseline and study visits. 107 patients, half of whom had COVID-19, completed the six-month follow-up. Six months after hospital discharge, six out of ten patients were affected by PICS, five out of every ten suffered from physical impairment, four out of every ten reported significant psychological symptoms, with three out of every ten affected by both. Three out of ten experienced significant chronic pain. Overall, six out of every ten patients experienced significant psychological symptoms at either one or both study visits. Only one in ten had psychological symptoms in isolation at six months. Six out of every ten patients reported a significantly lower health-related quality of life at six months as compared to their baseline. Three out of every ten patients had not returned to their previous remunerative work, studying or home making. Neurocognitive impairment in this cohort was not verified, and this may have been due to the selection of the control group. However, there was a significant improvement in neurocognitive functioning from the six-week to the six-month study visits. Only 15% of patients received rehabilitation therapy after hospital discharge. Female sex, a higher co-morbidity score and an admission diagnosis of trauma were predictors of PICS symptoms. COVID-19 was not found to be associated with a higher incidence of PICS. , Thesis (D.Phil) -- Faculty of Health Science, School of Behavioural & Lifestyle Sciences, 2024
- Full Text:
- Date Issued: 2024-04
Economic complexity and inclusive growth in Sub-Saharan Africa: a cross country analysis
- Authors: Maxwele, Chuma
- Date: 2024-04
- Subjects: Gross domestic product , Economic development -- Africa , International trade , Balance of trade -- Africa Africa, Sub-Saharan Africa, Sub-Saharan Africa, Sub-Saharan Africa, Sub-Saharan -- Economic conditions
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/65142 , vital:74037
- Description: The concept of economic complexity is a relatively new term in economics literature, it is used to refer to the magnitude of productive knowledge or capabilities embedded in society. However, because of its potential impact on national prosperity, it is hypothesized that differences in the degree of economic complexity are major factors of inequalities in the growth rates of nations. The approach of economic complexity makes use of fine-grained data on thousands of economic activities to learn both abstract factors of production and the way they combine into thousands of outputs. However, it is only in recent years that studies have started to consider the association between economic complexity and economic growth. As such, there is a lack of robust, vigorous literature that examines the association between economic complexity and inclusive growth, particularly in the context of Sub Sub-Saharan Africa. The extant literature focuses on the relationship between economic complexity and isolated cases of some macroeconomic indicators of growth. As a departure from the existing studies and as a contribution to the field, inclusive growth, in this study, is measured as a composite index from various growth indicators as postulated in the inclusive growth theories and then each indicator is viewed separately. Thus, the general purpose of the study is to investigate the relationship between economic complexity and inclusive growth in Sub Sub-Saharan Africa from 1996 to 2019 2019, which is the primary objective of the study. The first objective of the study is to examine the effect of economic complexity on welfare indicators in Sub Sub-Saharan African countries from 1996 to 2019. In examining the effect, the study employed a Pool Mean Group – Autoregressive Distributive Lag (PMG PMG-ARDL) model. The results of the study reveal that economic complexity, economic growth rate, and terms of trade have a positive and statistically significant long-run impact on welfare in Sub Sub-Saharan Africa. The short-run dynamics reveal that economic complexity negatively and significantly affects welfare. The study's second objective examines the impact of economic complexity on economic indicators in Sub-Saharan African countries from 1996 to 2019. To examine the impact, the study employed the Panel Ordinary Least Square (POLS) model. The results of the study demonstrate that economic complexity, foreign direct investment, inflation, and population growth have a negative and significant impact on the economic index. However, government expenditure demonstrates a positive and significant effect on economic indicators. The third objective of the study examines the effect of economic complexity on human development in Sub Sub-Saharan African countries from 1996 to 2019. In examining the effect, the study employed the Panel Dynamic Ordinary Least Square (DOLS) model for the long-run relationship, and the Generalised Method of Moments (GMM) for the short-run relationship. The results of the long long-run relationship show that economic complexity has a negative impact on human development which is significant at 1 percent. Short Short-run relationships reveal that economic complexity has a positive and insignificant impact on human development. The fourth objective of the study investigates the effect of economic complexity on good governance in Sub Sub-Saharan African countries from 1996 to 2019. The study employed the Pool Mean Group – Autoregressive Distributive Lag (PMG PMG-ARDL) model to investigate the relationship. The PMG PMG-ARDL model results reveal that economic complexity, foreign aid, and the Gini coefficient have a positive and statistically significant long-run impact on good governance in Sub Sub-Saharan Africa. The fifth and last objective of the study investigates the effect of economic complexity on inclusive growth in Sub Sub-Saharan African countries from year 1996 to 2019. To investigate the relationship, the study applied the Panel Vector Autoregressive (P-VAR) model. The results from the grangerGranger-causality test show a unidirectional relationship running from economic complexity to inclusive growth, the panel VAR model reveals that economic complexity has a negative and significant effect on inclusive growth at 10 percent level of significance in Sub Sub-Saharan Africa. The present study investigated five objectives, and out of the five objectives, only two (i.e., Welfare and Good Governance ) have a positive and significant relationship with economic complexity in the long long-run. This implies that with more productive structures, these countries would be in a better position to promote institutional quality and later advance welfare regimes in Sub Sub-Saharan Africa. However, for that goal to be realized, the Sub-Saharan African region should first achieve, or have, a certain level of economic development. , Thesis (PhD) -- Faculty of Business and Economic Sciences, School of Economics, Development and Tourism, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Maxwele, Chuma
- Date: 2024-04
- Subjects: Gross domestic product , Economic development -- Africa , International trade , Balance of trade -- Africa Africa, Sub-Saharan Africa, Sub-Saharan Africa, Sub-Saharan Africa, Sub-Saharan -- Economic conditions
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/65142 , vital:74037
- Description: The concept of economic complexity is a relatively new term in economics literature, it is used to refer to the magnitude of productive knowledge or capabilities embedded in society. However, because of its potential impact on national prosperity, it is hypothesized that differences in the degree of economic complexity are major factors of inequalities in the growth rates of nations. The approach of economic complexity makes use of fine-grained data on thousands of economic activities to learn both abstract factors of production and the way they combine into thousands of outputs. However, it is only in recent years that studies have started to consider the association between economic complexity and economic growth. As such, there is a lack of robust, vigorous literature that examines the association between economic complexity and inclusive growth, particularly in the context of Sub Sub-Saharan Africa. The extant literature focuses on the relationship between economic complexity and isolated cases of some macroeconomic indicators of growth. As a departure from the existing studies and as a contribution to the field, inclusive growth, in this study, is measured as a composite index from various growth indicators as postulated in the inclusive growth theories and then each indicator is viewed separately. Thus, the general purpose of the study is to investigate the relationship between economic complexity and inclusive growth in Sub Sub-Saharan Africa from 1996 to 2019 2019, which is the primary objective of the study. The first objective of the study is to examine the effect of economic complexity on welfare indicators in Sub Sub-Saharan African countries from 1996 to 2019. In examining the effect, the study employed a Pool Mean Group – Autoregressive Distributive Lag (PMG PMG-ARDL) model. The results of the study reveal that economic complexity, economic growth rate, and terms of trade have a positive and statistically significant long-run impact on welfare in Sub Sub-Saharan Africa. The short-run dynamics reveal that economic complexity negatively and significantly affects welfare. The study's second objective examines the impact of economic complexity on economic indicators in Sub-Saharan African countries from 1996 to 2019. To examine the impact, the study employed the Panel Ordinary Least Square (POLS) model. The results of the study demonstrate that economic complexity, foreign direct investment, inflation, and population growth have a negative and significant impact on the economic index. However, government expenditure demonstrates a positive and significant effect on economic indicators. The third objective of the study examines the effect of economic complexity on human development in Sub Sub-Saharan African countries from 1996 to 2019. In examining the effect, the study employed the Panel Dynamic Ordinary Least Square (DOLS) model for the long-run relationship, and the Generalised Method of Moments (GMM) for the short-run relationship. The results of the long long-run relationship show that economic complexity has a negative impact on human development which is significant at 1 percent. Short Short-run relationships reveal that economic complexity has a positive and insignificant impact on human development. The fourth objective of the study investigates the effect of economic complexity on good governance in Sub Sub-Saharan African countries from 1996 to 2019. The study employed the Pool Mean Group – Autoregressive Distributive Lag (PMG PMG-ARDL) model to investigate the relationship. The PMG PMG-ARDL model results reveal that economic complexity, foreign aid, and the Gini coefficient have a positive and statistically significant long-run impact on good governance in Sub Sub-Saharan Africa. The fifth and last objective of the study investigates the effect of economic complexity on inclusive growth in Sub Sub-Saharan African countries from year 1996 to 2019. To investigate the relationship, the study applied the Panel Vector Autoregressive (P-VAR) model. The results from the grangerGranger-causality test show a unidirectional relationship running from economic complexity to inclusive growth, the panel VAR model reveals that economic complexity has a negative and significant effect on inclusive growth at 10 percent level of significance in Sub Sub-Saharan Africa. The present study investigated five objectives, and out of the five objectives, only two (i.e., Welfare and Good Governance ) have a positive and significant relationship with economic complexity in the long long-run. This implies that with more productive structures, these countries would be in a better position to promote institutional quality and later advance welfare regimes in Sub Sub-Saharan Africa. However, for that goal to be realized, the Sub-Saharan African region should first achieve, or have, a certain level of economic development. , Thesis (PhD) -- Faculty of Business and Economic Sciences, School of Economics, Development and Tourism, 2024
- Full Text:
- Date Issued: 2024-04
Effects of foreign capital inflows on human development in Ghana and the mediating role of institutional quality
- Authors: Dadzie, Sylvester Kwesi
- Date: 2024-04
- Subjects: Capital movements -- Ghana , Economic development -- Ghana , Structural equation modeling -- Case studies
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64929 , vital:73987
- Description: The issue of financing for human development has been crucial for governments and stakeholders. The financing mechanisms for human development have been broadly categorised into domestic and foreign. The foreign capital inflows are to complement domestic resources for development. However, despite the heterogeneity of past studies, several studies have proved that with adequate institutional quality, an inflow of finance can positively impact human development. This study sought to examine the effect of foreign capital inflows on human development and the role of institutional quality in Ghana using partial least square structural equation modelling (PLS-SEM) on selected quartered secondary data from 1996 to 2020, primarily incorporating World Development Indicators (WDI) and World Governance Indicators (WGI). It reveals firstly that foreign capital inflows have significant positive influence on institutional quality in Ghana; secondly, institutional quality has insignificant positive effects on human development; thirdly, the direct effects of foreign capital inflows on human development are negative and insignificant. Finally, the effects of foreign capital inflows on human development are not mediated by institutional quality despite the positive effects of institutional quality. The study concludes that institutional quality does not mediate between the effects of foreign capital inflows and human development in Ghana. However, this study recommends that the government design and implement appropriate policies to create an enabling environment to strengthen institutions and regulations while attracting foreign capital as a supplementary source of domestic investment to enhance human development. , Thesis (MPhil) -- Faculty of Business and Economic Sciences, School of Economics, Development and Tourism, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Dadzie, Sylvester Kwesi
- Date: 2024-04
- Subjects: Capital movements -- Ghana , Economic development -- Ghana , Structural equation modeling -- Case studies
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64929 , vital:73987
- Description: The issue of financing for human development has been crucial for governments and stakeholders. The financing mechanisms for human development have been broadly categorised into domestic and foreign. The foreign capital inflows are to complement domestic resources for development. However, despite the heterogeneity of past studies, several studies have proved that with adequate institutional quality, an inflow of finance can positively impact human development. This study sought to examine the effect of foreign capital inflows on human development and the role of institutional quality in Ghana using partial least square structural equation modelling (PLS-SEM) on selected quartered secondary data from 1996 to 2020, primarily incorporating World Development Indicators (WDI) and World Governance Indicators (WGI). It reveals firstly that foreign capital inflows have significant positive influence on institutional quality in Ghana; secondly, institutional quality has insignificant positive effects on human development; thirdly, the direct effects of foreign capital inflows on human development are negative and insignificant. Finally, the effects of foreign capital inflows on human development are not mediated by institutional quality despite the positive effects of institutional quality. The study concludes that institutional quality does not mediate between the effects of foreign capital inflows and human development in Ghana. However, this study recommends that the government design and implement appropriate policies to create an enabling environment to strengthen institutions and regulations while attracting foreign capital as a supplementary source of domestic investment to enhance human development. , Thesis (MPhil) -- Faculty of Business and Economic Sciences, School of Economics, Development and Tourism, 2024
- Full Text:
- Date Issued: 2024-04
Elephant impacts on plant diversity and structure in the Shamwari Private Game Reserve
- Authors: Halvey, Andrew Lloyd
- Date: 2024-04
- Subjects: Elephants -- Nutrition -- South Africa -- Eastern Cape , Elephants -- Habitat -- South Africa -- Eastern Cape , Shamwari Game Reserve (South Africa)
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/63777 , vital:73597
- Description: Many African landscapes rely on processes such as fire, tree-fall and drought in addition to herbivores to initiate change across the landscape. In the Eastern Cape, elephant have a significant impact on the community structure and diversity of the vegetation they live in. This is most likely the case for the Albany Valley Thicket and azonal riparian vegetation of Shamwari Private Game Reserve, where browsing animals, particularly megaherbivores like the black rhinoceros and elephant, are the main cause of defoliation. The presence of large herbivores creates challenges when it comes to long-term sustainability and biodiversity of the vegetation in Shamwari. Vegetation monitoring provides essential information for effective management of megaherbivores not only in Shamwari but in many other similar reserves. The aim of this study was to design a monitoring plan for the Albany Valley Thicket and riparian vegetation in Shamwari using available vegetation metrics. The vegetation was measured in permanent plots (90 m line intercept analysis per plot) in the Albany Valley Thicket and riparian vegetation of Shamwari. Plot selection was based on thicket structural integrity using NDVI score as a proxy. In all plots, thicket structure was assessed using canopy heights measured every 50 cm along the line. Detrended correspondence analysis of the species abundance data suggested three distinct structural and compositional vegetation states for thicket and riparian vegetation: dense, intermediate and open. Significant relationships between NDVI and vegetation structural metrics across the condition states indicated that NDVI could be used as a proxy for vegetation condition. Vegetation compositional metrics, however, were not always correlated to NDVI and determining species diversity for the vegetation presents additional information useful for monitoring. The monitoring recommended for the reserve is to evaluate vegetation structural integrity annually in summer using NDVI. Areas of change could then be measured for diversity as well as for change in the abundance of selected plant indicator species. This information should be used to initiate management actions if unwanted change has occurred. , Thesis (MSc) -- Faculty of Science, School of Environmental Sciences, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Halvey, Andrew Lloyd
- Date: 2024-04
- Subjects: Elephants -- Nutrition -- South Africa -- Eastern Cape , Elephants -- Habitat -- South Africa -- Eastern Cape , Shamwari Game Reserve (South Africa)
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/63777 , vital:73597
- Description: Many African landscapes rely on processes such as fire, tree-fall and drought in addition to herbivores to initiate change across the landscape. In the Eastern Cape, elephant have a significant impact on the community structure and diversity of the vegetation they live in. This is most likely the case for the Albany Valley Thicket and azonal riparian vegetation of Shamwari Private Game Reserve, where browsing animals, particularly megaherbivores like the black rhinoceros and elephant, are the main cause of defoliation. The presence of large herbivores creates challenges when it comes to long-term sustainability and biodiversity of the vegetation in Shamwari. Vegetation monitoring provides essential information for effective management of megaherbivores not only in Shamwari but in many other similar reserves. The aim of this study was to design a monitoring plan for the Albany Valley Thicket and riparian vegetation in Shamwari using available vegetation metrics. The vegetation was measured in permanent plots (90 m line intercept analysis per plot) in the Albany Valley Thicket and riparian vegetation of Shamwari. Plot selection was based on thicket structural integrity using NDVI score as a proxy. In all plots, thicket structure was assessed using canopy heights measured every 50 cm along the line. Detrended correspondence analysis of the species abundance data suggested three distinct structural and compositional vegetation states for thicket and riparian vegetation: dense, intermediate and open. Significant relationships between NDVI and vegetation structural metrics across the condition states indicated that NDVI could be used as a proxy for vegetation condition. Vegetation compositional metrics, however, were not always correlated to NDVI and determining species diversity for the vegetation presents additional information useful for monitoring. The monitoring recommended for the reserve is to evaluate vegetation structural integrity annually in summer using NDVI. Areas of change could then be measured for diversity as well as for change in the abundance of selected plant indicator species. This information should be used to initiate management actions if unwanted change has occurred. , Thesis (MSc) -- Faculty of Science, School of Environmental Sciences, 2024
- Full Text:
- Date Issued: 2024-04
Enabling legislative coherence in the Eswatini construction industry
- Hlatshwayo, Thandiwe Ncam'sile
- Authors: Hlatshwayo, Thandiwe Ncam'sile
- Date: 2024-04
- Subjects: Construction industry -- Law and legislation -- Swaziland , Construction workers -- Legal status, laws, etc. -- Swaziland , Industrial safety -- Law and legislation -- Swaziland
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/64544 , vital:73748
- Description: The construction industry is an age-old and highly dynamic sector that contributes to the betterment of human life through the development of infrastructure. The presence of regulations is crucial in ensuring the provision of quality, standardization, efficiency, and effectiveness in service delivery. Inadequate regulation of the construction industry has been identified as the primary cause of construction failures in both developing and developed nations. Eswatini is no exception to this issue of legislative failure. The Construction Industry Council (CIC) was established by the Government of Eswatini without initially determining the specific challenges faced by the construction industry in Eswatini. The unique legislative needs pertaining to Eswatini were not explored to ensure that the framework is tailor-made for the Eswatini sector. Given the industry's diverse and intricate nature, a generic approach would not be sufficient to create a unified legislative framework. The study was aimed at developing a coherent legislative framework for the Eswatini construction industry. This study used a mixed-methods research design, incorporating both quantitative and qualitative data. A total of 297 participants were randomly selected from the CIC database for the quantitative survey. A total of 45 interviewees were purposively selected for the semi-structured interviews. Descriptive and inferential analysis were used for the interpretation of the quantitative data. Thematic analysis was used for the qualitative data. Exploratory Factor Analysis, using the maximum likelihood method with Varimax Rotation was employed to analyse the factor structure and correlation between items of the quantitative data. Additionally, the KMO and Bartlett's Tests were conducted. The ANOVA Test was used to test the hypothesis. Thematic analysis was employed for the qualitative data analysis. The findings of this study revealed that contractors in Eswatini recognised the significance of a well-functioning legislative framework and expressed dissatisfaction with the existing legislative measures implemented in the country. The key informant interviews highlighted various challenges, including the absence of regulations for the implementation of the CIC Act, lack of accountability and transparency in the management of funds for CIC operations and inadequate grading criteria. Other challenges that were revealed were insufficient oversight, unfair competition, corruption and limited stakeholder engagement. , Thesis (DPhil) -- Faculty of Engineering, the Built Environment, and Technology, School of Built Environment and Civil Engineering, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Hlatshwayo, Thandiwe Ncam'sile
- Date: 2024-04
- Subjects: Construction industry -- Law and legislation -- Swaziland , Construction workers -- Legal status, laws, etc. -- Swaziland , Industrial safety -- Law and legislation -- Swaziland
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/64544 , vital:73748
- Description: The construction industry is an age-old and highly dynamic sector that contributes to the betterment of human life through the development of infrastructure. The presence of regulations is crucial in ensuring the provision of quality, standardization, efficiency, and effectiveness in service delivery. Inadequate regulation of the construction industry has been identified as the primary cause of construction failures in both developing and developed nations. Eswatini is no exception to this issue of legislative failure. The Construction Industry Council (CIC) was established by the Government of Eswatini without initially determining the specific challenges faced by the construction industry in Eswatini. The unique legislative needs pertaining to Eswatini were not explored to ensure that the framework is tailor-made for the Eswatini sector. Given the industry's diverse and intricate nature, a generic approach would not be sufficient to create a unified legislative framework. The study was aimed at developing a coherent legislative framework for the Eswatini construction industry. This study used a mixed-methods research design, incorporating both quantitative and qualitative data. A total of 297 participants were randomly selected from the CIC database for the quantitative survey. A total of 45 interviewees were purposively selected for the semi-structured interviews. Descriptive and inferential analysis were used for the interpretation of the quantitative data. Thematic analysis was used for the qualitative data. Exploratory Factor Analysis, using the maximum likelihood method with Varimax Rotation was employed to analyse the factor structure and correlation between items of the quantitative data. Additionally, the KMO and Bartlett's Tests were conducted. The ANOVA Test was used to test the hypothesis. Thematic analysis was employed for the qualitative data analysis. The findings of this study revealed that contractors in Eswatini recognised the significance of a well-functioning legislative framework and expressed dissatisfaction with the existing legislative measures implemented in the country. The key informant interviews highlighted various challenges, including the absence of regulations for the implementation of the CIC Act, lack of accountability and transparency in the management of funds for CIC operations and inadequate grading criteria. Other challenges that were revealed were insufficient oversight, unfair competition, corruption and limited stakeholder engagement. , Thesis (DPhil) -- Faculty of Engineering, the Built Environment, and Technology, School of Built Environment and Civil Engineering, 2024
- Full Text:
- Date Issued: 2024-04
Estimation of a generalist meso-carnivore (black-backed jackal) population from a fenced protected area
- Davidson-Phillips, Samuel Ralph
- Authors: Davidson-Phillips, Samuel Ralph
- Date: 2024-04
- Subjects: Wildlife conservation , Carnivorous animals -- Conservation , Carnivorous animals -- Ecology
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/63698 , vital:73589
- Description: Since 2017, landowners, field guides, and management staff have reported large groups of black-backed jackals (Lupullela mesomelas) (here-forward jackal) in the Welgevonden Game Reserve, Limpopo, South Africa. This is linked with several observations of jackals predating on various ungulate species, potentially leading to unintended consequences on prey populations. These observations combined with an apparent poor survival rate of impala (Aepyceros melampus) and continuous declines in their number led to the perception that jackals could be partly responsible. Several studies have attempted to describe the ecological role of jackals within multiple environments, most of which have proven to be variable and context dependent. Human-modified landscapes along with the fencing of protected areas, may have manipulated the role of jackal within these scenarios. Jackals are wide-ranging and generally not confined by fencing, therefore their population trends possibly fluctuate within these anthropogenic landscapes. Re-introduced apex predators have been shown to facilitate food (provision of carrion) and simultaneously suppress jackal (active killing), this, however, remains difficult to predict. Jackals are classified as facultative cooperative hunters, and the term describes how they hunt in groups opportunistically when suitable resources of prey are available. The indication by several studies that jackals do actively predate rather than only scavenge, illustrates that the species has the potential to cause declines in an ungulate population. It therefore appears erroneous to exclude the species in terms of predator-prey relationships, particularly for land managers of fenced protected areas. The first step to any ecological management is the understanding of population size and trends over time. Unfortunately, little to no reliable methods exist to assess or monitor jackal populations. A popular tool for cryptic and wide-ranging terrestrial carnivores is Spatial Capture Recapture (SCR) models, typically through a camera trap array. These often rely on individual identities and an imperfect detection process to derive a statistical estimate of a given area. Jackals have been assumed to be individually unidentifiable and therefore these methods have largely been excluded. To address this a pilot-targeted camera-trap survey was conducted to improve capture and image quality. Following the role of this procedure, semi-automated software was applied to test the feasibility of individual identifications of captured images. This resulted in a subset of 58 right and left identifiable flank images, compiled from the highest graded images (n = 220) using the open-source Interactive Individual IdentificationSystem Beta Contour 3.0 (I3S Contour). I3S Contour assists users by distinguishing between unique contours on independent flanks without omitting observer effort and ranking. The effectiveness of the identification procedure was evaluated using three software tool trials, namely Computer-aided Annotation, Manual Contour Annotation, and Manual Contour Annotation (MA-2), where MA-2 included additional user-defined meta-data to images. Results showed that jackals could be individually identified from camera trap images and thus opened up the use of previously excluded SCR methodologies. Utilising the jackal database derived from the identification procedures described a total of 28 complete identifications (both flanks matched), 32 left-sided and 36 right-sided captures were used. These were derived from two independent survey periods split between seasonality (Winter & Spring). Two SCR methods were compared, namely, the Spatially Explicit Camera Recapture (SECR) and the newly developed Spatial Presence-Absence (SPA) modelling approach. SECR relies on full individual identification linked to spatial locations to derive spatial parameters to estimate population densities. The SECR methodology has been considered the most precise and was thus used as the benchmark. SPA relies on detections only (i.e., without individual identities), along with informative or uninformative priors. This must be across a spatial array that has detectors close enough to allow for simultaneous detections during each occasion (< 24 hours). Comparisons between these model outputs indicated a high degree of confidence interval overlap; however, SPA had a consistently higher posterior mode density estimate (63-64% higher), where the coefficient of variation between outputs also indicated the SPA having a closer relative precision. The targeted survey results for both model outputs for 2021 did not appear unusually high when compared to other studies. To assess the WGR population size over the long term, opportunistic by-catch data from a nine-year leopard (Panthera pardus) camera survey (Panthera organisation) was utilised. Model outputs from each of the years indicated that population estimates remained relatively stable. This was an unexpected result as the SPA densities did not follow the detection observations. This could be attributed to M not being set high enough (200) and the model reaching the limit, resulting in similar outputs between years. An alternative explanation is where the station spacing is larger than the diameter of the home range, which may reduce spatial correlation. , Thesis (MSc) -- Faculty of Science, School of Natural Resource Science & Management, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Davidson-Phillips, Samuel Ralph
- Date: 2024-04
- Subjects: Wildlife conservation , Carnivorous animals -- Conservation , Carnivorous animals -- Ecology
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/63698 , vital:73589
- Description: Since 2017, landowners, field guides, and management staff have reported large groups of black-backed jackals (Lupullela mesomelas) (here-forward jackal) in the Welgevonden Game Reserve, Limpopo, South Africa. This is linked with several observations of jackals predating on various ungulate species, potentially leading to unintended consequences on prey populations. These observations combined with an apparent poor survival rate of impala (Aepyceros melampus) and continuous declines in their number led to the perception that jackals could be partly responsible. Several studies have attempted to describe the ecological role of jackals within multiple environments, most of which have proven to be variable and context dependent. Human-modified landscapes along with the fencing of protected areas, may have manipulated the role of jackal within these scenarios. Jackals are wide-ranging and generally not confined by fencing, therefore their population trends possibly fluctuate within these anthropogenic landscapes. Re-introduced apex predators have been shown to facilitate food (provision of carrion) and simultaneously suppress jackal (active killing), this, however, remains difficult to predict. Jackals are classified as facultative cooperative hunters, and the term describes how they hunt in groups opportunistically when suitable resources of prey are available. The indication by several studies that jackals do actively predate rather than only scavenge, illustrates that the species has the potential to cause declines in an ungulate population. It therefore appears erroneous to exclude the species in terms of predator-prey relationships, particularly for land managers of fenced protected areas. The first step to any ecological management is the understanding of population size and trends over time. Unfortunately, little to no reliable methods exist to assess or monitor jackal populations. A popular tool for cryptic and wide-ranging terrestrial carnivores is Spatial Capture Recapture (SCR) models, typically through a camera trap array. These often rely on individual identities and an imperfect detection process to derive a statistical estimate of a given area. Jackals have been assumed to be individually unidentifiable and therefore these methods have largely been excluded. To address this a pilot-targeted camera-trap survey was conducted to improve capture and image quality. Following the role of this procedure, semi-automated software was applied to test the feasibility of individual identifications of captured images. This resulted in a subset of 58 right and left identifiable flank images, compiled from the highest graded images (n = 220) using the open-source Interactive Individual IdentificationSystem Beta Contour 3.0 (I3S Contour). I3S Contour assists users by distinguishing between unique contours on independent flanks without omitting observer effort and ranking. The effectiveness of the identification procedure was evaluated using three software tool trials, namely Computer-aided Annotation, Manual Contour Annotation, and Manual Contour Annotation (MA-2), where MA-2 included additional user-defined meta-data to images. Results showed that jackals could be individually identified from camera trap images and thus opened up the use of previously excluded SCR methodologies. Utilising the jackal database derived from the identification procedures described a total of 28 complete identifications (both flanks matched), 32 left-sided and 36 right-sided captures were used. These were derived from two independent survey periods split between seasonality (Winter & Spring). Two SCR methods were compared, namely, the Spatially Explicit Camera Recapture (SECR) and the newly developed Spatial Presence-Absence (SPA) modelling approach. SECR relies on full individual identification linked to spatial locations to derive spatial parameters to estimate population densities. The SECR methodology has been considered the most precise and was thus used as the benchmark. SPA relies on detections only (i.e., without individual identities), along with informative or uninformative priors. This must be across a spatial array that has detectors close enough to allow for simultaneous detections during each occasion (< 24 hours). Comparisons between these model outputs indicated a high degree of confidence interval overlap; however, SPA had a consistently higher posterior mode density estimate (63-64% higher), where the coefficient of variation between outputs also indicated the SPA having a closer relative precision. The targeted survey results for both model outputs for 2021 did not appear unusually high when compared to other studies. To assess the WGR population size over the long term, opportunistic by-catch data from a nine-year leopard (Panthera pardus) camera survey (Panthera organisation) was utilised. Model outputs from each of the years indicated that population estimates remained relatively stable. This was an unexpected result as the SPA densities did not follow the detection observations. This could be attributed to M not being set high enough (200) and the model reaching the limit, resulting in similar outputs between years. An alternative explanation is where the station spacing is larger than the diameter of the home range, which may reduce spatial correlation. , Thesis (MSc) -- Faculty of Science, School of Natural Resource Science & Management, 2024
- Full Text:
- Date Issued: 2024-04
Evaluating elephant, Loxodonta africana, space-use and elephant-linked vegetation change in Liwonde National Park, Malawi
- Authors: Evers, Emma Else Maria
- Date: 2024-04
- Subjects: Elephants -- Nutrition -- Malawi , Ecological heterogeneity , Vegetation and climate
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/63744 , vital:73594
- Description: Heterogeneity, the spatio-temporal variation of abiotic and biotic factors, is a key concept that underpins many ecological phenomena and promotes biodiversity. Ecosystem engineers, such as African savanna elephants (hereafter elephant), Loxodonta africana, are organisms capable of affecting heterogeneity through the creation or modification of habitats. Thus, their impacts can have important consequences for ecosystem biodiversity, both positive and negative. Caughley’s “elephant problem” cautions that confined or compressed, growing elephant populations will inevitably lead to a loss of biodiversity. However, a shift in our understanding of elephants suggests that not all elephant impacts lead to negative biodiversity consequences, as long as there is a heterogeneous spread of elephant impacts that allows for spatio-temporal refuges promoting the persistence of both impact-tolerant and impact-intolerant species. To date, little empirical evidence is available in support of managing elephants under this paradigm and few studies are available that infer the consequences of the distribution of elephant impacts on biodiversity. In addition, most studies use parametric statistics that do not account for scale, spatial autocorrelation, or non-stationarity, leading to a misrepresentation of the underlying processes and patterns of drivers of elephant space-use and the consequences of their impacts on biodiversity. Here, I evaluate spatio-temporal patterns and drivers of elephant space-use, and how the distribution of their impacts affects biodiversity through vegetation changes, using a multi-scaled spatial approach, in Liwonde National Park, Malawi. My study demonstrates that elephant space-use in Liwonde is heterogeneous, leading to spatio-temporal variation in the distribution of their impacts, even in a small, fenced reserve. The importance of the drivers of this heterogeneous space-use varied based on the scale of analysis, water was generally important at larger scales while vegetation quality (indexed by NDVI) was more important at smaller scales. When examined using local models, my results suggest that relationships exhibit non-stationarity, what is important in one area of the park is not necessarily important in other areas. The spatio-temporal variation of the inferred impacts of elephants in Liwonde still allowed for spatio-temporal refuges to be created, no clear linear relationship was found between elephant return intervals and woody species structural and functional diversity (indexed by changes in tree cover and changes in annual regrowth using Normalized Difference Vegetation Index as a measure, respectively) throughout the park. My study provides support for adopting the heterogeneity paradigm for managing elephants and demonstrates that not all elephant impacts result in negative vegetation change. I also demonstrate the crucial implications of accounting for scale, non-stationarity, and spatial autocorrelation to evaluate how animals both respond to, and contribute to, environmental heterogeneity. , Thesis (MSc) -- Faculty of Science, School of Environmental Sciences, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Evers, Emma Else Maria
- Date: 2024-04
- Subjects: Elephants -- Nutrition -- Malawi , Ecological heterogeneity , Vegetation and climate
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/63744 , vital:73594
- Description: Heterogeneity, the spatio-temporal variation of abiotic and biotic factors, is a key concept that underpins many ecological phenomena and promotes biodiversity. Ecosystem engineers, such as African savanna elephants (hereafter elephant), Loxodonta africana, are organisms capable of affecting heterogeneity through the creation or modification of habitats. Thus, their impacts can have important consequences for ecosystem biodiversity, both positive and negative. Caughley’s “elephant problem” cautions that confined or compressed, growing elephant populations will inevitably lead to a loss of biodiversity. However, a shift in our understanding of elephants suggests that not all elephant impacts lead to negative biodiversity consequences, as long as there is a heterogeneous spread of elephant impacts that allows for spatio-temporal refuges promoting the persistence of both impact-tolerant and impact-intolerant species. To date, little empirical evidence is available in support of managing elephants under this paradigm and few studies are available that infer the consequences of the distribution of elephant impacts on biodiversity. In addition, most studies use parametric statistics that do not account for scale, spatial autocorrelation, or non-stationarity, leading to a misrepresentation of the underlying processes and patterns of drivers of elephant space-use and the consequences of their impacts on biodiversity. Here, I evaluate spatio-temporal patterns and drivers of elephant space-use, and how the distribution of their impacts affects biodiversity through vegetation changes, using a multi-scaled spatial approach, in Liwonde National Park, Malawi. My study demonstrates that elephant space-use in Liwonde is heterogeneous, leading to spatio-temporal variation in the distribution of their impacts, even in a small, fenced reserve. The importance of the drivers of this heterogeneous space-use varied based on the scale of analysis, water was generally important at larger scales while vegetation quality (indexed by NDVI) was more important at smaller scales. When examined using local models, my results suggest that relationships exhibit non-stationarity, what is important in one area of the park is not necessarily important in other areas. The spatio-temporal variation of the inferred impacts of elephants in Liwonde still allowed for spatio-temporal refuges to be created, no clear linear relationship was found between elephant return intervals and woody species structural and functional diversity (indexed by changes in tree cover and changes in annual regrowth using Normalized Difference Vegetation Index as a measure, respectively) throughout the park. My study provides support for adopting the heterogeneity paradigm for managing elephants and demonstrates that not all elephant impacts result in negative vegetation change. I also demonstrate the crucial implications of accounting for scale, non-stationarity, and spatial autocorrelation to evaluate how animals both respond to, and contribute to, environmental heterogeneity. , Thesis (MSc) -- Faculty of Science, School of Environmental Sciences, 2024
- Full Text:
- Date Issued: 2024-04
Evaluating factors affecting development and implementation of innovation practices at Eastcape Midlands TVET College
- Authors: Momoza, Ncedo Prince
- Date: 2024-04
- Subjects: Vocational education -- Technological innovations , Technical education -- Technological innovations , Education, Higher -- Technological innovations , Education, Higher -- Computer-assisted instruction Educational technology
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/65219 , vital:74052
- Description: This study underscores the dearth of effective innovation practices in South African higher educational institutions. The research delves into the key factors that influence the development and implementation of innovation practices in Technical and Vocational Education and Training (TVET) colleges, with a particular focus on the Eastcape Midlands TVET College in the Midlands region. The study aims to identify the primary drivers and barriers to innovation adoption within the context of a TVET college; it also evaluates the impact of innovation practices on student outcomes, institutional performance, and industry partnerships. This study used qualitative research methods, including interviews with key stakeholders such as college administrators, faculty members, and industry partners. Quota sampling was used to select interview participants based on their expertise, experience and roles in the college's innovation efforts. This approach ensured that the selected participants offered valuable insights into the topic under investigation. The participation rate for this study was 93.3%, with the results revealing that the matter was complex. Among the insights gained from the research was the identification of major obstacles to innovation, such as a lack of resources, tedious bureaucratic processes, as well as staff and faculty resistance to change. Furthermore, the research found successful strategies that stimulate innovation, such as cultivating an environment of experimentation, improving cooperation with business associates, and introducing adaptable teaching methods. The leadership team of the college may use these findings as a guide, which provides focused tactics to overcome obstacles and to develop effective methods. This research recommends that utilizing knowledge of resistance to change could result in customized change management plans, while knowledge of successful innovation projects could guide the creation of programs and policies that promote and support innovative practices within the institution. Furthermore, by providing context-specific insights and practical suggestions that could enhance the promotion of innovation in comparable educational environments, these findings contribute to the existent body of knowledge on the subject and help similar institutions achieve excellence in innovation and long-term success. , Thesis (MBA) -- Faculty of Business and Economic Sciences, Business School, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Momoza, Ncedo Prince
- Date: 2024-04
- Subjects: Vocational education -- Technological innovations , Technical education -- Technological innovations , Education, Higher -- Technological innovations , Education, Higher -- Computer-assisted instruction Educational technology
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/65219 , vital:74052
- Description: This study underscores the dearth of effective innovation practices in South African higher educational institutions. The research delves into the key factors that influence the development and implementation of innovation practices in Technical and Vocational Education and Training (TVET) colleges, with a particular focus on the Eastcape Midlands TVET College in the Midlands region. The study aims to identify the primary drivers and barriers to innovation adoption within the context of a TVET college; it also evaluates the impact of innovation practices on student outcomes, institutional performance, and industry partnerships. This study used qualitative research methods, including interviews with key stakeholders such as college administrators, faculty members, and industry partners. Quota sampling was used to select interview participants based on their expertise, experience and roles in the college's innovation efforts. This approach ensured that the selected participants offered valuable insights into the topic under investigation. The participation rate for this study was 93.3%, with the results revealing that the matter was complex. Among the insights gained from the research was the identification of major obstacles to innovation, such as a lack of resources, tedious bureaucratic processes, as well as staff and faculty resistance to change. Furthermore, the research found successful strategies that stimulate innovation, such as cultivating an environment of experimentation, improving cooperation with business associates, and introducing adaptable teaching methods. The leadership team of the college may use these findings as a guide, which provides focused tactics to overcome obstacles and to develop effective methods. This research recommends that utilizing knowledge of resistance to change could result in customized change management plans, while knowledge of successful innovation projects could guide the creation of programs and policies that promote and support innovative practices within the institution. Furthermore, by providing context-specific insights and practical suggestions that could enhance the promotion of innovation in comparable educational environments, these findings contribute to the existent body of knowledge on the subject and help similar institutions achieve excellence in innovation and long-term success. , Thesis (MBA) -- Faculty of Business and Economic Sciences, Business School, 2024
- Full Text:
- Date Issued: 2024-04
Evaluating factors affecting the effectiveness of the tender system In Buffalo City Metropolitan Municipality
- Authors: Gastile, Nosikhumbuzo
- Date: 2024-04
- Subjects: Contractors -- South Africa , Government purchasing , Business logistics -- South Africa -- Eastern Cape
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64986 , vital:74001
- Description: The tender system is a complex process requiring attention to detail; when followed correctly, it is advantageous for both the vendor/service provider and the customer (public or private sector). However, many factors affect it and end up contributing to its ineffectiveness. This study mentions political interference and bureaucracy, maladministration, fraud, corruption, flawed tender practices, delay in payments and lack of skills by tender administrators. Against this background, the primary objective of this study is to contribute to improving the tender system in Buffalo City Municipality by investigating the factors that make it ineffective. A quantitative research design was used, and a sample was taken from contractors carrying out work for Buffalo City Metropolitan Municipality in the Eastern Cape Province. Convenience sampling was used while conducting this study. This study’s demographic data is analysed in percentage form using simple descriptive statistics. Once data had been gathered from the independent and dependent variables, the researcher used it to draw a conclusion and inferences using inferential statistics to show relationships between multiple variables to generalise results and make predictions. A multiple regression analysis was also employed. , Thesis (MBA) -- Faculty of Business and Economic Sciences, Business School, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Gastile, Nosikhumbuzo
- Date: 2024-04
- Subjects: Contractors -- South Africa , Government purchasing , Business logistics -- South Africa -- Eastern Cape
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64986 , vital:74001
- Description: The tender system is a complex process requiring attention to detail; when followed correctly, it is advantageous for both the vendor/service provider and the customer (public or private sector). However, many factors affect it and end up contributing to its ineffectiveness. This study mentions political interference and bureaucracy, maladministration, fraud, corruption, flawed tender practices, delay in payments and lack of skills by tender administrators. Against this background, the primary objective of this study is to contribute to improving the tender system in Buffalo City Municipality by investigating the factors that make it ineffective. A quantitative research design was used, and a sample was taken from contractors carrying out work for Buffalo City Metropolitan Municipality in the Eastern Cape Province. Convenience sampling was used while conducting this study. This study’s demographic data is analysed in percentage form using simple descriptive statistics. Once data had been gathered from the independent and dependent variables, the researcher used it to draw a conclusion and inferences using inferential statistics to show relationships between multiple variables to generalise results and make predictions. A multiple regression analysis was also employed. , Thesis (MBA) -- Faculty of Business and Economic Sciences, Business School, 2024
- Full Text:
- Date Issued: 2024-04
Evaluating factors influencing quality of service delivery in the Nelson Mandela Bay Municipality
- Authors: Tlali, Bernard
- Date: 2024-04
- Subjects: Nelson Mandela Bay Municipality (South Africa) , Municipal services -- South Africa -- Port Elizabeth , Local government -- South Africa -- Port Elizabeth , Municipal officials and employees -- Job satisfaction -- South Africa Job satisfaction Employee motivation
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/65478 , vital:74159
- Description: The provision of quality service continues to be a challenge in South Africa. This research was triggered by the quality of service delivery, which indicated a downward trend in the Nelson Mandela Bay Municipality during the past five years. Notably, deficiencies in the quality of service delivery are a prevalent problem for municipalities, including the Nelson Mandela Bay Municipality. Insufficient strategic leadership skills in management lead to a lack of satisfaction, motivation and a loss of loyalty among employees, which leads to poor quality of services delivered to the community. In order to understand the relationship between employee loyalty, employee satisfaction, leadership styles, and quality of service delivery, this study aimed to evaluate the factors influencing the quality of service delivery in the Nelson Mandela Bay Municipality with the intention to enhance these from the employee’s perspective. This study followed a quantitative approach with stratified random sampling. Online surveys were used to collect data from sampled Nelson Mandela Bay Municipality employees. The sample size was 110 respondents, and a 66.09% response rate was achieved. Data analysis techniques used in the study included exploratory factor analysis (EFA) to extract statistically significant factors. Multiple regression analysis was employed to evaluate the predictive power of independent variables (Employee Empowerment, Loyalty of Employees, Employee Satisfaction, Transformational Leadership) over the dependent variable (Quality of Service). The Pearson Product Moment Correlation analysis was used to determine the relationship between the independent and dependent variables. The findings revealed that Employee Empowerment did not influence the quality of service in the Nelson Mandela Bay Municipality. The study's findings reveal that at 95% confidence level and alpha = 0.05, Loyalty of Employees, Employee Satisfaction, and Transformational Leadership significantly positively influence the Quality of Service. The study recommends that Nelson Mandela Bay Municipality management must embark on initiatives like life-work balance, organisational commitment, innovation behaviour, and benchmarking to improve the quality of service delivery. The study has contributed to the existing body of knowledge on quality of service by introducing Loyalty of Employees, Employee Satisfaction, and Transformational Leadership as factors significantly positively influencing the quality of service delivery compared to the renowned SERVQUAL dimensions (Empathy, Responsiveness, Assurance, Reliability, and Tangibility). The study's finding indicated , Thesis (MBA) -- Faculty of Business and Economic Sciences, Business School, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Tlali, Bernard
- Date: 2024-04
- Subjects: Nelson Mandela Bay Municipality (South Africa) , Municipal services -- South Africa -- Port Elizabeth , Local government -- South Africa -- Port Elizabeth , Municipal officials and employees -- Job satisfaction -- South Africa Job satisfaction Employee motivation
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/65478 , vital:74159
- Description: The provision of quality service continues to be a challenge in South Africa. This research was triggered by the quality of service delivery, which indicated a downward trend in the Nelson Mandela Bay Municipality during the past five years. Notably, deficiencies in the quality of service delivery are a prevalent problem for municipalities, including the Nelson Mandela Bay Municipality. Insufficient strategic leadership skills in management lead to a lack of satisfaction, motivation and a loss of loyalty among employees, which leads to poor quality of services delivered to the community. In order to understand the relationship between employee loyalty, employee satisfaction, leadership styles, and quality of service delivery, this study aimed to evaluate the factors influencing the quality of service delivery in the Nelson Mandela Bay Municipality with the intention to enhance these from the employee’s perspective. This study followed a quantitative approach with stratified random sampling. Online surveys were used to collect data from sampled Nelson Mandela Bay Municipality employees. The sample size was 110 respondents, and a 66.09% response rate was achieved. Data analysis techniques used in the study included exploratory factor analysis (EFA) to extract statistically significant factors. Multiple regression analysis was employed to evaluate the predictive power of independent variables (Employee Empowerment, Loyalty of Employees, Employee Satisfaction, Transformational Leadership) over the dependent variable (Quality of Service). The Pearson Product Moment Correlation analysis was used to determine the relationship between the independent and dependent variables. The findings revealed that Employee Empowerment did not influence the quality of service in the Nelson Mandela Bay Municipality. The study's findings reveal that at 95% confidence level and alpha = 0.05, Loyalty of Employees, Employee Satisfaction, and Transformational Leadership significantly positively influence the Quality of Service. The study recommends that Nelson Mandela Bay Municipality management must embark on initiatives like life-work balance, organisational commitment, innovation behaviour, and benchmarking to improve the quality of service delivery. The study has contributed to the existing body of knowledge on quality of service by introducing Loyalty of Employees, Employee Satisfaction, and Transformational Leadership as factors significantly positively influencing the quality of service delivery compared to the renowned SERVQUAL dimensions (Empathy, Responsiveness, Assurance, Reliability, and Tangibility). The study's finding indicated , Thesis (MBA) -- Faculty of Business and Economic Sciences, Business School, 2024
- Full Text:
- Date Issued: 2024-04
Evaluation of leadership stimulus on employee intrinsic motivation in the Transnet locomotive maintenance business at Swartkops
- Authors: Mdluli, Ignatius Mlanza
- Date: 2024-04
- Subjects: Leadership -- South Africa , Intrinsic motivation , Employee motivation , Transnet
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/65164 , vital:74039
- Description: This research evaluated the leadership styles' stimulus on employee intrinsic motivation, focusing on the Transnet Locomotive Maintenance Business in Swartkops as there are leadership and motivation challenges in the organisation. Furthermore, the study explored the stimulus of three distinct leadership styles which are transactional, transformational and charismatic leadership on employees' levels of intrinsic motivation. The primary objective was to explore how these leadership styles nurtured or hindered the internal drive of employees, contributing to the organisation's overall performance. A qualitative research approach was used in the study. Semi-structured interviews were employed to collect insights from participants within the Transnet Locomotive Maintenance Business in Swartkops. Ten participants were selected using purposive selection. Thematic analysis was used to analyse the collected data, revealed patterns and connections between leadership styles and intrinsic motivation outcomes. The study unearthed that transactional leadership, often linked with reward-based approaches, unfavourably stimulated intrinsic motivation for most participants. Conversely, transformational leadership emerged as a potent positive force, constructively stimulating the intrinsic motivation of most employees. Charismatic leadership, known for its persuasive and emotionally engaging attributes, presented a mixed picture, constructively and destructively stimulating intrinsic motivation; therefore, the outcomes of this research have implications for leadership development, organisational strategy and employee engagement practices. The study recommends a transformational leadership style, emphasising inspiration, empowerment and a shared vision, and this enhances employees' intrinsic motivation and, consequently, organisational performance. , Thesis (MBA) -- Faculty of Business and Economic Sciences, Business School, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Mdluli, Ignatius Mlanza
- Date: 2024-04
- Subjects: Leadership -- South Africa , Intrinsic motivation , Employee motivation , Transnet
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/65164 , vital:74039
- Description: This research evaluated the leadership styles' stimulus on employee intrinsic motivation, focusing on the Transnet Locomotive Maintenance Business in Swartkops as there are leadership and motivation challenges in the organisation. Furthermore, the study explored the stimulus of three distinct leadership styles which are transactional, transformational and charismatic leadership on employees' levels of intrinsic motivation. The primary objective was to explore how these leadership styles nurtured or hindered the internal drive of employees, contributing to the organisation's overall performance. A qualitative research approach was used in the study. Semi-structured interviews were employed to collect insights from participants within the Transnet Locomotive Maintenance Business in Swartkops. Ten participants were selected using purposive selection. Thematic analysis was used to analyse the collected data, revealed patterns and connections between leadership styles and intrinsic motivation outcomes. The study unearthed that transactional leadership, often linked with reward-based approaches, unfavourably stimulated intrinsic motivation for most participants. Conversely, transformational leadership emerged as a potent positive force, constructively stimulating the intrinsic motivation of most employees. Charismatic leadership, known for its persuasive and emotionally engaging attributes, presented a mixed picture, constructively and destructively stimulating intrinsic motivation; therefore, the outcomes of this research have implications for leadership development, organisational strategy and employee engagement practices. The study recommends a transformational leadership style, emphasising inspiration, empowerment and a shared vision, and this enhances employees' intrinsic motivation and, consequently, organisational performance. , Thesis (MBA) -- Faculty of Business and Economic Sciences, Business School, 2024
- Full Text:
- Date Issued: 2024-04
Evaluation of road surface distresses using GPS and GIS techniques: a case study of the City of Johannesburg, South Africa
- Authors: Tsedu, Rinae
- Date: 2024-04
- Subjects: Global Positioning System South Africa -- Johannesburg , Navigation -- Technological innovations , Geographic information systems -- South Africa -- Johannesburg
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64401 , vital:73695
- Description: Thesis (MSc) -- Faculty of Science, School of Environmental Sciences, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Tsedu, Rinae
- Date: 2024-04
- Subjects: Global Positioning System South Africa -- Johannesburg , Navigation -- Technological innovations , Geographic information systems -- South Africa -- Johannesburg
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/64401 , vital:73695
- Description: Thesis (MSc) -- Faculty of Science, School of Environmental Sciences, 2024
- Full Text:
- Date Issued: 2024-04
Exploring 3d printing of brass instruments: a comparative study of French horn mouthpieces
- Authors: Barker, Dylan Bruce
- Date: 2024-04
- Subjects: Horn (Musical instrument) , Three-dimensional printing , Instrumentation and orchestration (Band)
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/62755 , vital:72939
- Description: The French horn is an orchestral instrument with a rich history that spans centuries, undergoing notable transformations in its design and functionality. A short overview of this history is provided in Appendix A. Originating as a simple coil, the French horn has evolved to encompass a complex valve system, multiple harmonic series, and a diverse range of modifications tailored to players' preferences and requirements. These modifications include mutes, grips, extra keys, and even the exploration of different materials for mouthpieces. The use of plastic rims on mouthpieces, for reasons such as allergies, thermal conductivity, and tactile sensation, has already gained traction among horn players (Tuckwell, 2002). In the realm of manufacturing and technology, the concept of additive manufacturing has emerged as a promising avenue. Referred to as the next "industrial revolution” (Berman, 2012), additive manufacturing has become increasingly accessible through desktop-scale 3D printers. This technology offers a viable method for producing cost-effective musical instruments and enhancers without compromising quality (Kantaros, 2018). As evidenced by a 2018 Roundtable report from the South African Parliament, additive manufacturing aligns with the trajectory of the fourth industrial revolution, prompting governments to develop policies and strategies to harness its potential. Given the significance of additive manufacturing, a comprehensive investigation into applying these new technologies for the horn is warranted. Specifically, material choice, quality of sound, and the experience of performing on a printed mouthpiece is investigated and compared to a traditional metal mouthpiece. While the horn is comprised of many individual components, this study relates specifically to the mouthpiece. A brief appraisal of the significance of the mouthpiece will follow in the next section. , Thesis (MMus) -- Faculty of Humanities, School of Visual and Performing Arts, 2024
- Full Text:
- Date Issued: 2024-04
- Authors: Barker, Dylan Bruce
- Date: 2024-04
- Subjects: Horn (Musical instrument) , Three-dimensional printing , Instrumentation and orchestration (Band)
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/62755 , vital:72939
- Description: The French horn is an orchestral instrument with a rich history that spans centuries, undergoing notable transformations in its design and functionality. A short overview of this history is provided in Appendix A. Originating as a simple coil, the French horn has evolved to encompass a complex valve system, multiple harmonic series, and a diverse range of modifications tailored to players' preferences and requirements. These modifications include mutes, grips, extra keys, and even the exploration of different materials for mouthpieces. The use of plastic rims on mouthpieces, for reasons such as allergies, thermal conductivity, and tactile sensation, has already gained traction among horn players (Tuckwell, 2002). In the realm of manufacturing and technology, the concept of additive manufacturing has emerged as a promising avenue. Referred to as the next "industrial revolution” (Berman, 2012), additive manufacturing has become increasingly accessible through desktop-scale 3D printers. This technology offers a viable method for producing cost-effective musical instruments and enhancers without compromising quality (Kantaros, 2018). As evidenced by a 2018 Roundtable report from the South African Parliament, additive manufacturing aligns with the trajectory of the fourth industrial revolution, prompting governments to develop policies and strategies to harness its potential. Given the significance of additive manufacturing, a comprehensive investigation into applying these new technologies for the horn is warranted. Specifically, material choice, quality of sound, and the experience of performing on a printed mouthpiece is investigated and compared to a traditional metal mouthpiece. While the horn is comprised of many individual components, this study relates specifically to the mouthpiece. A brief appraisal of the significance of the mouthpiece will follow in the next section. , Thesis (MMus) -- Faculty of Humanities, School of Visual and Performing Arts, 2024
- Full Text:
- Date Issued: 2024-04