- Title
- The synthesis of functionalized carbon nanomaterial from waste tyre sourced carbon for chemosensing during purification processes
- Creator
- Du Plessis, Jacolien
- Subject
- Nanostructured materials
- Subject
- Nanotechnology
- Date Issued
- 2018
- Date
- 2018
- Type
- Thesis
- Type
- Masters
- Type
- MSc
- Identifier
- http://hdl.handle.net/10948/29925
- Identifier
- vital:30794
- Description
- The short lifetime of tyres causes great environmental harm due to their non-biodegradable nature resulting in land and water pollution. Exploration of novel uses for recycled tyres is therefore imperative. The use of recycled waste tyres as carbon source for the synthesis of fluorescent chemosensing carbon nanomaterial for the detection of harmful chemicals in water is proposed in this work. Three key problems are addressed in this study: i) re-using of waste tyre products, ii) synthesis of low-cost carbon nanomaterial, iii) detection of harmful compounds within environment systems. The fluorescent triazolyl-coumarin compound, 7-(diethylamino)-3-(4-(1-hydroxyethyl)-1H-1,2,3-triazol-1-yl)-2H-chromen-2-one, was synthesized in multiple steps from 4-diethylamino salicylaldehyde. The last step included the use of Cu(I)-catalyzed 1,3-dipolar azide-alkyne cycloaddition (“click-reaction”) to form a triazole ring. Carbon spheres were synthesized through catalytic chemical vapour deposition (CVD) from waste tyre pyrolysis oil (WTPO), as the carbon source, in the presence of a catalytic amount of ferrocene. The quality and quantity of the carbon spheres had an overall improvement as the synthesis temperatures increased from 800 oC to 950 oC. The diameter of the carbon spheres reduced from 1017 nm to 577 nm as seen in TEM and SEM imaging. TGA and XRD analysis indicated a direct relationship between an increase in synthesis temperatures with an increase in the crystallinity of the carbon spheres. Commercially available naphthenic oil was used as a reference to compare the impact of the starting carbon precursor on the morphology of the carbon nanomaterial under the same reaction conditions. Multi-walled carbon nanotubes were synthesized at the lower temperatures of 800-850 oC. Carbon fibres and carbon spheres were observed at the synthesis temperatures of 900-950 oC. The carbon source played a role in the morphology of the carbon nanomaterial as it could be seen between the complex natured WTPO and the pure naphthenic oil. The purified carbon spheres synthesized at 950 oC from WTPO were functionalized with the triazolyl-coumarin units on the surface through Steglich esterification using DCC/DMAP to yield fluorescent carbon spheres. Complexation studies of the functionalized carbon spheres were done using UV/Vis spectroscopy and fluorescence with a wide range of ions; Ag+, Al3+, Co2+, Cr3+, Cu2+, Fe3+, ii Hg2+, Li+, Ni2+, Pb2+ and Zn2+. The triazolyl-coumarin carbon spheres showed reasonable sensitivity and selectivity towards Fe3+ in water with a quenching effect in fluorescence. Titration studies with Fe3+ indicating an exponential decay of quenching in the fluorescence up to 68% with detection limit at 2.73 x 10-5 M.
- Format
- xv, 104 leaves
- Format
- Publisher
- Nelson Mandela University
- Publisher
- Faculty of Science
- Language
- English
- Rights
- Nelson Mandela University
- Hits: 1149
- Visitors: 1241
- Downloads: 116
Collections
NMU School of BioMolecular and Chemical Sciences
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | SOURCE1 | J DU PLESSIS.pdf | 5 MB | Adobe Acrobat PDF | View Details Download |