- Title
- A monitoring and control system for an accelerated weather test chamber
- Creator
- Harvey, Luke Gareth
- Subject
- Materials -- Deterioration -- Testing
- Subject
- Motor vehicles -- Testing Motor vehicles -- Automatic control Intelligent control systems
- Date Issued
- 2019
- Date
- 2019
- Type
- Thesis
- Type
- Masters
- Type
- MEng
- Identifier
- http://hdl.handle.net/10948/40360
- Identifier
- vital:36152
- Description
- In the Automotive Sector, weathering tests of components are of paramount importance. The most critical components to the overall comfort and durability of a vehicle are the interior components and thus is important to guarantee the quality of these components. The interior components are generally made of plastic, fabric, leather and various painted components. These components are prone to fading, cracking and distortion which is caused by natural factors such as solar radiation, temperature and moisture. This is known as natural weathering. Over the years many weathering tests have been carried out on automotive components to address critical issues during the design process. Many of these tests are simulated in chambers to mimic real life cycles. Although these accelerated tests provide somewhat accurate results in much shorter periods, natural weathering is still essential as it is uncontrolled and unpredictable. This dissertation looks at the method of a metallic chamber used to carry out weathering tests on automotive components and to simulate the conditions inside a vehicle. It addresses the current state and improvement: accurate tracking, intelligent fuzzy logic control and cloud-based monitoring. Currently weather testing chambers are stationery, which does not allow for maximum exposer to solar radiation. Therefore, a system was designed to allow the weather testing chamber to track the azimuth and elevation of the sun to increase the solar radiation on the components tested, a GPS will achieve this. Currently systems lack remote monitoring. A further shortcoming is the lack of controlling the temperature and humidity inside the chamber for sufficient tests. The use of a fuzzy logic controller was implemented to achieve this. The fuzzy logic was compared to other types of logic controllers. To further IoT integration, two main control devices were used, these control devices were two Arduino Mega’s. One Arduino Mega was used for the intelligent fuzzy logic control and the second for solar tracking. The weathering system and controllers were powered by using solar power. The fuzzy logic controller was tested while tracking the sun and then not tracking the sun. The results obtained were compared and it was seen that the fuzzy logic performed very well in both instances, however, the test with tracking the sun performed better. A second test was performed. The second test was similar to the previously mentioned test, but the fuzzy logic had a set point control. It was concluded that both tests performed as expected as the fuzzy logic controlled the temperature and humidity at the given setpoint, but during the solar tracking test the fuzzy logic control performed the best. The fuzzy logic worked well in general use as well as set point control, both for tracking and non-tracking. The tracking performed better than the non-tracking.
- Format
- xiii, 103 leaves
- Format
- Publisher
- Nelson Mandela University
- Publisher
- Faculty of Engineering Built Environment and Information Technology
- Language
- English
- Rights
- Nelson Mandela University
- Hits: 865
- Visitors: 1004
- Downloads: 174
Collections
NMU School of Engineering
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | SOURCE1 | Dissertation(FINAL HANDIN).pdf | 4 MB | Adobe Acrobat PDF | View Details Download |