Activated carbon from lignocellulosic waste residues: effect of activating agent on porosity characteristics and use as adsorbents for organic species
- Olorundare, O F, Okonkwo, J O, Msagati, T A M, Mamba, Bhekie B, Krause, Rui W M
- Authors: Olorundare, O F , Okonkwo, J O , Msagati, T A M , Mamba, Bhekie B , Krause, Rui W M
- Date: 2014
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125233 , vital:35748 , https://doi.org/10.1007/s11270-014-1876-2
- Description: This paper reports on the effect of activating agents such as the impregnation ratio of phosphoric acid (1:1–1:5) at constant activation temperature on the performance of porous activated carbon from waste residues (maize tassel). The variation in the impregnation ratio of the produced activated carbon (AC) from 1:1 to 1:5 enabled the preparation of a high surface area (1,263 m2/g) and a large pore volume (1.592 cm3/g) of AC produced from maize tassel (MT) using a convectional chemical activating agent (phosphoric acid). Impregnation ratios (IR) of the precursors were varied between 1:1 and 1:5 in which it was found that the ratio of 1:4 was optimal based on the high surface area, while 1:5 has the optimal pore volume value for the produced activated carbon.
- Full Text:
- Date Issued: 2014
- Authors: Olorundare, O F , Okonkwo, J O , Msagati, T A M , Mamba, Bhekie B , Krause, Rui W M
- Date: 2014
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125233 , vital:35748 , https://doi.org/10.1007/s11270-014-1876-2
- Description: This paper reports on the effect of activating agents such as the impregnation ratio of phosphoric acid (1:1–1:5) at constant activation temperature on the performance of porous activated carbon from waste residues (maize tassel). The variation in the impregnation ratio of the produced activated carbon (AC) from 1:1 to 1:5 enabled the preparation of a high surface area (1,263 m2/g) and a large pore volume (1.592 cm3/g) of AC produced from maize tassel (MT) using a convectional chemical activating agent (phosphoric acid). Impregnation ratios (IR) of the precursors were varied between 1:1 and 1:5 in which it was found that the ratio of 1:4 was optimal based on the high surface area, while 1:5 has the optimal pore volume value for the produced activated carbon.
- Full Text:
- Date Issued: 2014
Comparison between base metals and platinum group metals in nitrogen, M codoped TiO 2 (M= Fe, Cu, Pd, Os) for photocatalytic removal of an organic dye in water
- Kuvarega, Alex T, Mamba, Bhekie B, Krause, Rui W M
- Authors: Kuvarega, Alex T , Mamba, Bhekie B , Krause, Rui W M
- Date: 2014
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125129 , vital:35734 , https://doi.org/10.1155/2014/962102
- Description: The photocatalytic performance of a number of nonmetal and metal codoped TiO2 for the degradation of eosin yellow under simulated solar radiation was investigated. The synthesised materials were characterised by FTIR, Raman spectroscopy, XRD, DRUV-Vis, SEM, and TEM.The N, metal codoped TiO2 containing 0.5 wt.% of the metal consisted mainly of the anatase phase, with a particle size range of 15–28 nm. The particles were largely spherical and shifted the absorption edge well into the visible region. Band gap reduction was more pronounced for the N, PGM codoped TiO2 compared to N, base metal codoped samples. Codoping led to an enhancement in the photocatalytic activity of the materials for the degradation of eosin yellow. N, Pd codoped TiO2 was the most effective photocatalyst (99.9% dye removal) while N, Cu codoped TiO2 showed the least activity (25.5% removal). The mechanism for the photocatalytic enhancement was proposed on the basis of formation of an electron deficient Schottky barrier at the semiconductor-metal interface, which acts as an electron sink and thus retards electron-hole recombination. It was shown that the ability of the photocatalyst to degrade the dye depends on the nature and type of the metal dopant in the codoped TiO2 system.
- Full Text:
- Date Issued: 2014
- Authors: Kuvarega, Alex T , Mamba, Bhekie B , Krause, Rui W M
- Date: 2014
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125129 , vital:35734 , https://doi.org/10.1155/2014/962102
- Description: The photocatalytic performance of a number of nonmetal and metal codoped TiO2 for the degradation of eosin yellow under simulated solar radiation was investigated. The synthesised materials were characterised by FTIR, Raman spectroscopy, XRD, DRUV-Vis, SEM, and TEM.The N, metal codoped TiO2 containing 0.5 wt.% of the metal consisted mainly of the anatase phase, with a particle size range of 15–28 nm. The particles were largely spherical and shifted the absorption edge well into the visible region. Band gap reduction was more pronounced for the N, PGM codoped TiO2 compared to N, base metal codoped samples. Codoping led to an enhancement in the photocatalytic activity of the materials for the degradation of eosin yellow. N, Pd codoped TiO2 was the most effective photocatalyst (99.9% dye removal) while N, Cu codoped TiO2 showed the least activity (25.5% removal). The mechanism for the photocatalytic enhancement was proposed on the basis of formation of an electron deficient Schottky barrier at the semiconductor-metal interface, which acts as an electron sink and thus retards electron-hole recombination. It was shown that the ability of the photocatalyst to degrade the dye depends on the nature and type of the metal dopant in the codoped TiO2 system.
- Full Text:
- Date Issued: 2014
Steam activation, characterisation and adsorption studies of activated carbon from maize tassels.
- Olorundare, O F, Msagati, Titus A, Krause, Rui W M, Okonkwo, J O, Mamba, Bhekie B
- Authors: Olorundare, O F , Msagati, Titus A , Krause, Rui W M , Okonkwo, J O , Mamba, Bhekie B
- Date: 2014
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/123847 , vital:35507 , https://doi.org/10.1080/02757540.2013.877001
- Description: In this paper, steam-produced activated carbon (STAC) from maize tassel (MT) was evaluated for its ability to remove basic dye (methylene blue MB) from aqueous solution in a batch adsorption process. The equilibrium experiments were conducted in the range of 50–300 mg/L initial MB concentrations at 30°C, for effect of pH, adsorbent dosage and contact time. The experimental data were analysed by Langmuir, Freundlich and Temkin isotherm models of adsorption. Freundlich adsorption isotherm was found to have highest value of R2(R2=0.97) compared to other models of Langmuir and Temkin having (0.96 and 0.95 respectively). STAC has a high adsorptive capacity for MB dye (200 mg/g) and also showed favourable adsorption for the dye with the separation factor for the dye-activated carbon system. The kinetic data obtained were analysed using pseudo first-order kinetic equation and pseudo second-order kinetic equation. The experimental data fitted well into pseudo second-order kinetic equation, as demonstrated by the high value of R2.
- Full Text:
- Date Issued: 2014
- Authors: Olorundare, O F , Msagati, Titus A , Krause, Rui W M , Okonkwo, J O , Mamba, Bhekie B
- Date: 2014
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/123847 , vital:35507 , https://doi.org/10.1080/02757540.2013.877001
- Description: In this paper, steam-produced activated carbon (STAC) from maize tassel (MT) was evaluated for its ability to remove basic dye (methylene blue MB) from aqueous solution in a batch adsorption process. The equilibrium experiments were conducted in the range of 50–300 mg/L initial MB concentrations at 30°C, for effect of pH, adsorbent dosage and contact time. The experimental data were analysed by Langmuir, Freundlich and Temkin isotherm models of adsorption. Freundlich adsorption isotherm was found to have highest value of R2(R2=0.97) compared to other models of Langmuir and Temkin having (0.96 and 0.95 respectively). STAC has a high adsorptive capacity for MB dye (200 mg/g) and also showed favourable adsorption for the dye with the separation factor for the dye-activated carbon system. The kinetic data obtained were analysed using pseudo first-order kinetic equation and pseudo second-order kinetic equation. The experimental data fitted well into pseudo second-order kinetic equation, as demonstrated by the high value of R2.
- Full Text:
- Date Issued: 2014
- «
- ‹
- 1
- ›
- »