Compensation for distribution of timing and reference signals over optical fibre networks for telescope arrays
- Authors: Wassin, Shukree
- Date: 2018
- Subjects: Fiber optics , Optical communications Very large array telescopes Optical fiber detectors
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/36425 , vital:33941
- Description: Significant advancements and developments have been made in optical frequency standards, in recent years. In order to verify the accuracy and preciseness of the disseminated RF signal, it is essential to compare its stability with the standards provided in literature as well as by metrology institutes. However, conventional frequency comparison techniques via satellites have extremely inferior stability qualities. As a result, the need for an alternative ultra-high precision RF transfer method presented itself. Highly accurate and precise frequency dissemination across optical fiber has proved a leading contender and a possible solution. When compared to conventional data transfer media, optical fiber has proven to be more superior and yields lower transmission errors and is immune to radio frequency interference. A further quality of optical fibre is that its transmission distance can be extended to greater degree than the traditional coaxial cable due to its low loss property. This thesis deals with the compensation of phase noise in single mode optical fibre. Phase noise degrades the performance and stability of the RF signal as well as the optical carrier frequency across long-haul optical networks. This work begins by experimentally demonstrating a unique and novel way for measuring the round-trip optical fibre latency times. The technique is based on all optical wavelength conversion using a stable PPS injection signal. The result highlighted the importance for active phase error compensation along a fibre link. Various computer simulations were used to study the influence of temperature fluctuation on the optical fibre. The first ever error signals generated at NMU was experimentally demonstrated. Results illustrated that, by minimizing the error voltage the phase difference between the transmitted and reference signals were reduced to zero. Performance analysis testing of the VCSEL phase correction actuator showed that majority of the dither iterations that induced the phase compensation took approximately 0.15 s. Residual frequency instabilities of 3.39791 x 10-12 at 1 s and 8.14848 x 10-12 at 103 s was measured when the 26 km G.655 fibre link was running freely. Experimental results further showed that the relative frequency stabilities measured at 1 s and 103 s were 4.43902 x 10-12 and 1.62055 x 10-13 during active compensation, respectively. The novel work presented in this thesis is exciting since the VCSEL is used as the optical source as well as the phase correction actuator. The benefits of such a device is that is reduces system costs and complexities.
- Full Text:
- Date Issued: 2018
Characterization of chromatic dispersion in single mode fibre
- Authors: Wassin, Shukree
- Date: 2014
- Subjects: Fiber optics Electromagnetic waves , Electromagnetic waves -- Transmission
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/47807 , vital:40379
- Description: In this dissertation, an investigation of chromatic dispersion is presented. The Pulse delay and phase Shift chromatic dispersion characterization techniques were used for conducting the measurements. The experiments were performed in a modern optical fibre research laboratory and chromatic dispersion measurements were carried out on several lengths of G.652 and G.655 single mode fibres. The pulse delay characterization technique measures the time of flight between two modulated optical signals whilst propagating along the fibre under test. During phase shift experiments, the group delay is obtained by measuring the relative phase difference as a function of wavelength, between adjacent sinusoidal light signals. The pulse delay and phase shift characterization techniques illustrated excellent agreement in the measured! chromatic Dispersion coefficients along the G.652 standard single mode! fibre as well as the G.655 positive and negative non-zero dispersion shifted fibre. It was found that the measurement accuracy improved as the fibre length increased. A periodic shift between the modulated optical signals, propagating along the fibre was experimentally observed. It is to be remarked that the longer wavelength signals propagated faster along the G.655 positive non-zero dispersion shifted fibre in comparison to its transmission within the G.655 negative non-zero dispersion shifted fibre. Furthermore, it was found that the sinusoidal signal shifted towards the left along the G.655 negative NZDSF fibre whilst the shift occurred towards the right along the G.655 positive NZDSF fibre. Generally, the shift arising along the G.655 fibres was found to be smaller than the shift seen throughout the G.652 fibres. Towards the end of this study, a chromatic dispersion compensation system was designed and tested. Once characterization of the compensation link was completed, it was experimentally illustrated that the chromatic dispersion across the system was successfully reduced. Finally, a sum of squares of error statistical test showed that the phase shift technique is more accurate in comparison to the pulse delay method. This result was found to be in good agreement with published work found in literature.
- Full Text:
- Date Issued: 2014