Comparative phototransformation of environmental pollutants using metallophthalocyanines supported on electrospun polymer fibers
- Zugle, Ruphino, Nyokong, Tebello
- Authors: Zugle, Ruphino , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/190509 , vital:45001 , xlink:href="https://doi.org/10.1002/app.38381"
- Description: The fluorescence and photoactivity of a series of Zn and Lu phthalocyanine complexes incorporated in various polymer fibers were investigated for the phototransformation of 4-chlorophenol, 4-nitrophenol, and methyl orange. The phthalocyanine complexes functionalized on polystyrene and polysulfone polymer fibers could be applied in the degradation of 4-chlorophenol, 4-nitrophenol, and methyl orange with 4-chlorophenol being much more susceptible to degradation while methyl orange was the least. Also polymer fibers of polystyrene were found to be reusable.
- Full Text:
- Date Issued: 2013
- Authors: Zugle, Ruphino , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/190509 , vital:45001 , xlink:href="https://doi.org/10.1002/app.38381"
- Description: The fluorescence and photoactivity of a series of Zn and Lu phthalocyanine complexes incorporated in various polymer fibers were investigated for the phototransformation of 4-chlorophenol, 4-nitrophenol, and methyl orange. The phthalocyanine complexes functionalized on polystyrene and polysulfone polymer fibers could be applied in the degradation of 4-chlorophenol, 4-nitrophenol, and methyl orange with 4-chlorophenol being much more susceptible to degradation while methyl orange was the least. Also polymer fibers of polystyrene were found to be reusable.
- Full Text:
- Date Issued: 2013
Effect of the relative humidity on the fibre morphology of polyamide 4.6 and polyamide 6.9 nanofibres
- De Schoenmaker, Bert, Van de Schueren, Lien, Zugle, Ruphino, Goethals, Annelies, Westbroek, Philippe, Kiekens, Paul, Nyokong, Tebello, De Clerck, Karen
- Authors: De Schoenmaker, Bert , Van de Schueren, Lien , Zugle, Ruphino , Goethals, Annelies , Westbroek, Philippe , Kiekens, Paul , Nyokong, Tebello , De Clerck, Karen
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242131 , vital:51004 , xlink:href="https://doi.org/10.1007/s10853-012-6934-9"
- Description: To obtain uniform and reproducible nanofibres, it is important to understand the effect of the different electrospinning parameters on the nanofibre morphology. Even though a lot of literature is available on the electrospinning of nanofibres, only minor research has been performed on the effect of the relative humidity (RH). This paper investigates the influence of this parameter on the electrospinning process and fibre morphology of the hydrophilic polyamide 4.6 and the less hydrophilic polyamide 6.9. First, the electrospinning process and deposition area of the nanofibres is examined at 10, 50 and 70 % RH. Subsequently, the effect of the polyamide concentration and solvent ratio on the fibre morphology is investigated using scanning electron microscopy and differential scanning calorimetry. It was found that the nanofibre diameter decreased with increasing RH. This resulted in less stable crystals for polyamide 4.6 while electrospinning of polyamide 6.9 at higher RH led to slightly more stable crystals. In conclusion, the water affinity of a polymer is an important factor in predicting the nanofibre morphology at different humidities.
- Full Text:
- Date Issued: 2013
- Authors: De Schoenmaker, Bert , Van de Schueren, Lien , Zugle, Ruphino , Goethals, Annelies , Westbroek, Philippe , Kiekens, Paul , Nyokong, Tebello , De Clerck, Karen
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242131 , vital:51004 , xlink:href="https://doi.org/10.1007/s10853-012-6934-9"
- Description: To obtain uniform and reproducible nanofibres, it is important to understand the effect of the different electrospinning parameters on the nanofibre morphology. Even though a lot of literature is available on the electrospinning of nanofibres, only minor research has been performed on the effect of the relative humidity (RH). This paper investigates the influence of this parameter on the electrospinning process and fibre morphology of the hydrophilic polyamide 4.6 and the less hydrophilic polyamide 6.9. First, the electrospinning process and deposition area of the nanofibres is examined at 10, 50 and 70 % RH. Subsequently, the effect of the polyamide concentration and solvent ratio on the fibre morphology is investigated using scanning electron microscopy and differential scanning calorimetry. It was found that the nanofibre diameter decreased with increasing RH. This resulted in less stable crystals for polyamide 4.6 while electrospinning of polyamide 6.9 at higher RH led to slightly more stable crystals. In conclusion, the water affinity of a polymer is an important factor in predicting the nanofibre morphology at different humidities.
- Full Text:
- Date Issued: 2013
Phototransformation of pollutants using lutetium and zinc phthalocyanines anchored on electrospun polymer fibers
- Authors: Zugle, Ruphino
- Date: 2013
- Subjects: Electrospinning Phthalocyanines Lutetium Zinc Polymers Dysprosium Pollutants Air Pollution Photochemistry
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4286 , http://hdl.handle.net/10962/d1002962
- Description: Novel lanthanide phthalocyanines containing dysprosium, erbium and lutetium as central metals were synthesized using phthalonitrile:metal salt ratio of 4:1 or lower phthalonitrile content as well as using unmetallated phthalocyanine. They were characterized using various spectroscopic and elemental analyses. Dysprosium bis-phthalocyanine was obtained while monomers were obtained for erbium and lutetium phthalocyanines. Theopen-shelldysprosiumbis-phthalocyanine and the monomeric complex of the open-shell erbium were neither fluorescent nor showed the ability to generate singlet oxygen. The triplet states of all the lutetium phthalocyanines were found to be populated with high triplet quantum yields and corresponding high singlet oxygen quantum yields. The fluorescence quantum yields of the lutetium phthalocyanines were however found to be very low. The lutetium phthalocyanines together with unsubstituted zinc phthalocyanine and its derivatives were successfully incorporated into electrospun polymer fibers either by covalent linkage or sorption forces. Spectral characteristics of the functionalized electrospun polymer fibers indicated that the phthalocyanines were bound and their integrity maintained within the fiber matrices. Most importantly the fluorescence and photoactivity of the phthalocyanines were equally maintained within the electrospun fibers. The functionalized electrospun polymer fibers especially those containing the zinc phthalocyanines could qualitatively detect nitrogen dioxide, a known environmental air pollutant. Also all the functionalized electrospun polystyrene and polysulfone fibers containing lutetium and zinc phthalocyanines could be applied for the photoconversion of 4-chlorophenol, 4-nitrophenol and methyl orange. Those of polystyrene could be re-used. Polyacrylic acid and polyurethane functionalized electrospun fibers were found not to be suitable for photocatalytic applications in aqueous medium. 4-Chlorophenol was found to be more susceptible to photodegradation while methyl orange very difficult to degrade.
- Full Text:
- Date Issued: 2013
- Authors: Zugle, Ruphino
- Date: 2013
- Subjects: Electrospinning Phthalocyanines Lutetium Zinc Polymers Dysprosium Pollutants Air Pollution Photochemistry
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4286 , http://hdl.handle.net/10962/d1002962
- Description: Novel lanthanide phthalocyanines containing dysprosium, erbium and lutetium as central metals were synthesized using phthalonitrile:metal salt ratio of 4:1 or lower phthalonitrile content as well as using unmetallated phthalocyanine. They were characterized using various spectroscopic and elemental analyses. Dysprosium bis-phthalocyanine was obtained while monomers were obtained for erbium and lutetium phthalocyanines. Theopen-shelldysprosiumbis-phthalocyanine and the monomeric complex of the open-shell erbium were neither fluorescent nor showed the ability to generate singlet oxygen. The triplet states of all the lutetium phthalocyanines were found to be populated with high triplet quantum yields and corresponding high singlet oxygen quantum yields. The fluorescence quantum yields of the lutetium phthalocyanines were however found to be very low. The lutetium phthalocyanines together with unsubstituted zinc phthalocyanine and its derivatives were successfully incorporated into electrospun polymer fibers either by covalent linkage or sorption forces. Spectral characteristics of the functionalized electrospun polymer fibers indicated that the phthalocyanines were bound and their integrity maintained within the fiber matrices. Most importantly the fluorescence and photoactivity of the phthalocyanines were equally maintained within the electrospun fibers. The functionalized electrospun polymer fibers especially those containing the zinc phthalocyanines could qualitatively detect nitrogen dioxide, a known environmental air pollutant. Also all the functionalized electrospun polystyrene and polysulfone fibers containing lutetium and zinc phthalocyanines could be applied for the photoconversion of 4-chlorophenol, 4-nitrophenol and methyl orange. Those of polystyrene could be re-used. Polyacrylic acid and polyurethane functionalized electrospun fibers were found not to be suitable for photocatalytic applications in aqueous medium. 4-Chlorophenol was found to be more susceptible to photodegradation while methyl orange very difficult to degrade.
- Full Text:
- Date Issued: 2013
Zinc (II) 2, 9, 16, 23-tetrakis [4-(N-methylpyridyloxy)]-phthalocyanine anchored on an electrospun polysulfone polymer fiber: Application for photosensitized conversion of methyl orange
- Zugle, Ruphino, Nyokong, Tebello
- Authors: Zugle, Ruphino , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/232741 , vital:50020 , xlink:href="https://doi.org/10.1016/j.molcata.2012.10.001"
- Description: In this work, a comparative study of photodegradation of methyl orange, an azo dye, in homogeneous aqueous solution of a quarternized cationic zinc phthalocyanine and a heterogeneous catalytic system based on the same phthalocyanine anchored on polysulfone polymer fiber is presented. In both cases, conversion involved the azo bond of the dye with no detectable opening up of the aromatic benzene rings. The reaction kinetics in both cases were consistent with first order with the conversion occurring in the homogeneous system being faster than when the functionalized polymer fiber was used. The reaction products consisted of a coupling product as well as a series of oligopolymeric products.
- Full Text:
- Date Issued: 2013
- Authors: Zugle, Ruphino , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/232741 , vital:50020 , xlink:href="https://doi.org/10.1016/j.molcata.2012.10.001"
- Description: In this work, a comparative study of photodegradation of methyl orange, an azo dye, in homogeneous aqueous solution of a quarternized cationic zinc phthalocyanine and a heterogeneous catalytic system based on the same phthalocyanine anchored on polysulfone polymer fiber is presented. In both cases, conversion involved the azo bond of the dye with no detectable opening up of the aromatic benzene rings. The reaction kinetics in both cases were consistent with first order with the conversion occurring in the homogeneous system being faster than when the functionalized polymer fiber was used. The reaction products consisted of a coupling product as well as a series of oligopolymeric products.
- Full Text:
- Date Issued: 2013
- «
- ‹
- 1
- ›
- »