Synthesis of single-walled carbon nanotubes by the pyrolysis of a compression activated iron (II) phthalocyanine/phthalocyanine metal-free derivative/ferric acetate mixture
- Mugadza, Tawanda, Antunes, Edith M, Nyokong, Tebello
- Authors: Mugadza, Tawanda , Antunes, Edith M , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189729 , vital:44926 , xlink:href="https://doi.org/10.1007/s12039-015-0886-y"
- Description: This paper reports on the synthesis of single walled carbon nanotubes (SWCNTs) from an activated mixture of iron (II) phthalocyanine, its metal-free derivative and ferric acetate. The powdered mixture was activated by compression into a tablet by applying a force of 300 kN, followed by re-grinding into powder and heating it to high temperatures (1000°C). The activation by compression resulted in more than 50% debundling of SWCNTs as judged by transition electron microscopy. Acid functionalization of the SWCNTs was confirmed by the increase in the D:G ratio from 0.56 to 0.87 in the Raman spectra and the observation of an average of one carboxylic acid group per 13 carbon atoms from thermogravimetric analysis (TGA). TGA also showed that the initial decomposition temperatures for the activated and non-activated mixtures to be 205°C and 245°C, respectively. Hence, activation leads to the lowering of the pyrolysis temperature of the phthalocyanines. X-ray diffraction, electronic absorption and Fourier transform infrared spectra were also employed to characterize the SWCNT.
- Full Text:
- Date Issued: 2015
- Authors: Mugadza, Tawanda , Antunes, Edith M , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189729 , vital:44926 , xlink:href="https://doi.org/10.1007/s12039-015-0886-y"
- Description: This paper reports on the synthesis of single walled carbon nanotubes (SWCNTs) from an activated mixture of iron (II) phthalocyanine, its metal-free derivative and ferric acetate. The powdered mixture was activated by compression into a tablet by applying a force of 300 kN, followed by re-grinding into powder and heating it to high temperatures (1000°C). The activation by compression resulted in more than 50% debundling of SWCNTs as judged by transition electron microscopy. Acid functionalization of the SWCNTs was confirmed by the increase in the D:G ratio from 0.56 to 0.87 in the Raman spectra and the observation of an average of one carboxylic acid group per 13 carbon atoms from thermogravimetric analysis (TGA). TGA also showed that the initial decomposition temperatures for the activated and non-activated mixtures to be 205°C and 245°C, respectively. Hence, activation leads to the lowering of the pyrolysis temperature of the phthalocyanines. X-ray diffraction, electronic absorption and Fourier transform infrared spectra were also employed to characterize the SWCNT.
- Full Text:
- Date Issued: 2015
Polyamide nanofiber membranes functionalized with zinc phthalocyanines
- Goethals, Annelies, Mugadza, Tawanda, Arslanoglu, Yasin, Zugle, Ruphino, Antunes, Edith M, Van Hulle, Stijn W, Nyokong, Tebello, De Clerck, Karen
- Authors: Goethals, Annelies , Mugadza, Tawanda , Arslanoglu, Yasin , Zugle, Ruphino , Antunes, Edith M , Van Hulle, Stijn W , Nyokong, Tebello , De Clerck, Karen
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241505 , vital:50945 , xlink:href="https://doi.org/10.1002/app.40486"
- Description: Electrospinning is an efficient method for the production of polyamide nanofiber membranes that are suitable for water filtration. Previous studies have shown that nanofiber membranes have high clean water permeability. The pathogen removal efficiency can be improved by functionalization with (organic) biocides. However, these membranes, like other membranes, are vulnerable to fouling which reduces the filtration efficiency. Therefore the present article investigates the potential of zinc phthalocyanines, which can produce singlet oxygen in the presence of visible light, as a functionalizing agent. The polyamide nanofiber membranes were functionalized with phthalocyanines using both a pre-functionalizing and post-functionalizing method. Only the post-functionalization method shows to result in nanofiber membranes capable of producing singlet oxygen. After 30 min 45% of 1,2-diphenylisobenzofuran (DPBF), used as an oxygen quencher, was removed by reaction with singlet oxygen. This resulted in a removal rate of 0.33 mol DBPF mol−1Zn min−1. During short term leaching tests, phthalocyanines could not be detected.
- Full Text:
- Date Issued: 2014
- Authors: Goethals, Annelies , Mugadza, Tawanda , Arslanoglu, Yasin , Zugle, Ruphino , Antunes, Edith M , Van Hulle, Stijn W , Nyokong, Tebello , De Clerck, Karen
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241505 , vital:50945 , xlink:href="https://doi.org/10.1002/app.40486"
- Description: Electrospinning is an efficient method for the production of polyamide nanofiber membranes that are suitable for water filtration. Previous studies have shown that nanofiber membranes have high clean water permeability. The pathogen removal efficiency can be improved by functionalization with (organic) biocides. However, these membranes, like other membranes, are vulnerable to fouling which reduces the filtration efficiency. Therefore the present article investigates the potential of zinc phthalocyanines, which can produce singlet oxygen in the presence of visible light, as a functionalizing agent. The polyamide nanofiber membranes were functionalized with phthalocyanines using both a pre-functionalizing and post-functionalizing method. Only the post-functionalization method shows to result in nanofiber membranes capable of producing singlet oxygen. After 30 min 45% of 1,2-diphenylisobenzofuran (DPBF), used as an oxygen quencher, was removed by reaction with singlet oxygen. This resulted in a removal rate of 0.33 mol DBPF mol−1Zn min−1. During short term leaching tests, phthalocyanines could not be detected.
- Full Text:
- Date Issued: 2014
Characterization and electrocatalytic behaviour of glassy carbon electrode modified with nickel nanoparticles towards amitrole detection
- Maringa, Audacity, Mugadza, Tawanda, Antunes, Edith M, Nyokong, Tebello
- Authors: Maringa, Audacity , Mugadza, Tawanda , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241793 , vital:50970 , xlink:href="https://doi.org/10.1016/j.jelechem.2013.04.022"
- Description: We report on the synthesis of Ni nanoparticles (NiNPs) and their application in electrocatalysis in comparison with nickel phthalocyanine (NiPc). UV–vis spectroscopy, powder X-ray diffraction, transmission electron microscopy and electron paramagnetic resonance were used in the characterization of NiNPs. Cyclic voltammetry and electrochemical impedance spectroscopy were used in electrocatalytic studies of amitrole on the glassy carbon electrode modified with NiNPs. The apparent and catalytic rate constants for amitrole on the NiNP-GCE were found to be 2.58 × 10−5 cm s−1 and 1.11 × 103 M−1 s−1, respectively.
- Full Text:
- Date Issued: 2013
- Authors: Maringa, Audacity , Mugadza, Tawanda , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241793 , vital:50970 , xlink:href="https://doi.org/10.1016/j.jelechem.2013.04.022"
- Description: We report on the synthesis of Ni nanoparticles (NiNPs) and their application in electrocatalysis in comparison with nickel phthalocyanine (NiPc). UV–vis spectroscopy, powder X-ray diffraction, transmission electron microscopy and electron paramagnetic resonance were used in the characterization of NiNPs. Cyclic voltammetry and electrochemical impedance spectroscopy were used in electrocatalytic studies of amitrole on the glassy carbon electrode modified with NiNPs. The apparent and catalytic rate constants for amitrole on the NiNP-GCE were found to be 2.58 × 10−5 cm s−1 and 1.11 × 103 M−1 s−1, respectively.
- Full Text:
- Date Issued: 2013
Polyamide nanofiber membranes functionalized with zinc phthalocyanines
- Goethals, Annelies, Mugadza, Tawanda, Arslanoglu, Yasin, Zugle, Ruphino, Antunes, Edith M, Hulle, Stijn W H Van, Nyokong, Tebello, Clerck, Karen De
- Authors: Goethals, Annelies , Mugadza, Tawanda , Arslanoglu, Yasin , Zugle, Ruphino , Antunes, Edith M , Hulle, Stijn W H Van , Nyokong, Tebello , Clerck, Karen De
- Language: English
- Type: Article
- Identifier: vital:7313 , http://hdl.handle.net/10962/d1020539
- Description: Electrospinning is an efficient method for the production of polyamide nanofiber membranes that are suitable for water filtration. Previous studies have shown that nanofiber membranes have high clean water permeability. The pathogen removal efficiency can be improved by functionalization with (organic) biocides. However, these membranes, like other membranes, are vulnerable to fouling which reduces the filtration efficiency. Therefore the present article investigates the potential of zinc phthalocyanines, which can produce singlet oxygen in the presence of visible light, as a functionalizing agent. The polyamide nanofiber membranes were functionalized with phthalocyanines using both a pre-functionalizing and post-functionalizing method. Only the post-functionalization method shows to result in nanofiber membranes capable of producing singlet oxygen. After 30 min 45% of 1,2-diphenylisobenzofuran (DPBF), used as an oxygen quencher, was removed by reaction with singlet oxygen. This resulted in a removal rate of 0.33 mol DBPF mol−1Zn min−1. During short term leaching tests, phthalocyanines could not be detected. , Original publication is available at http://dx.doi.org/10.1002/app.40486
- Full Text: false
- Authors: Goethals, Annelies , Mugadza, Tawanda , Arslanoglu, Yasin , Zugle, Ruphino , Antunes, Edith M , Hulle, Stijn W H Van , Nyokong, Tebello , Clerck, Karen De
- Language: English
- Type: Article
- Identifier: vital:7313 , http://hdl.handle.net/10962/d1020539
- Description: Electrospinning is an efficient method for the production of polyamide nanofiber membranes that are suitable for water filtration. Previous studies have shown that nanofiber membranes have high clean water permeability. The pathogen removal efficiency can be improved by functionalization with (organic) biocides. However, these membranes, like other membranes, are vulnerable to fouling which reduces the filtration efficiency. Therefore the present article investigates the potential of zinc phthalocyanines, which can produce singlet oxygen in the presence of visible light, as a functionalizing agent. The polyamide nanofiber membranes were functionalized with phthalocyanines using both a pre-functionalizing and post-functionalizing method. Only the post-functionalization method shows to result in nanofiber membranes capable of producing singlet oxygen. After 30 min 45% of 1,2-diphenylisobenzofuran (DPBF), used as an oxygen quencher, was removed by reaction with singlet oxygen. This resulted in a removal rate of 0.33 mol DBPF mol−1Zn min−1. During short term leaching tests, phthalocyanines could not be detected. , Original publication is available at http://dx.doi.org/10.1002/app.40486
- Full Text: false
- «
- ‹
- 1
- ›
- »