In vitro dissolution kinetics of Captopril from microspheres manufactured by solvent evaporation
- Khamanga, Sandile M, Walker, Roderick B
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2012
- Language: English
- Type: text , Article
- Identifier: vital:6390 , http://hdl.handle.net/10962/d1006311
- Description: The aim of this study was to develop and assess captopril-loaded microspheres in which Methocel and Eudragit RS were used as release-controlling factors and to evaluate captopril (CPT) release using kinetic models. Drug-excipient interactions were evaluated using infrared studies, and the physical appearance was characterized using scanning electron microscopy (SEM). A burst effect was observed during the first stage of dissolution for most batches of microspheres. SEM results reveal that this may be attributed to dissolution of captopril crystals that were present on the surface, embedded in the superficial layer of the matrix materials, trapped near the surface of the microspheres, or that may have diffused rapidly through the porous surface of the capsules. The release data generated during in vitro release studies were fitted to zero-order, first-order, Higuchi, Korsmeyer–Peppas, Kopcha, and Makoid–Banakar models. The release kinetics of captopril from most formulations followed a classical Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores located in the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed a predominance of diffusion relative to swelling or erosion throughout the entire test period. The drug release mechanism was also confirmed by the Makoid–Banakar and Korsmeyer–Peppas model exponents. This further supports a diffusion–release mechanism for most formulations. The models postulate that the total drug released is a summation of several mechanisms (viz., burst release, relaxation-induced controlled release, and diffusional release). These results also support the potential application of Eudragit/Methocel microspheres as a suitable sustained-release drug delivery system for captopril.
- Full Text:
- Date Issued: 2012
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2012
- Language: English
- Type: text , Article
- Identifier: vital:6390 , http://hdl.handle.net/10962/d1006311
- Description: The aim of this study was to develop and assess captopril-loaded microspheres in which Methocel and Eudragit RS were used as release-controlling factors and to evaluate captopril (CPT) release using kinetic models. Drug-excipient interactions were evaluated using infrared studies, and the physical appearance was characterized using scanning electron microscopy (SEM). A burst effect was observed during the first stage of dissolution for most batches of microspheres. SEM results reveal that this may be attributed to dissolution of captopril crystals that were present on the surface, embedded in the superficial layer of the matrix materials, trapped near the surface of the microspheres, or that may have diffused rapidly through the porous surface of the capsules. The release data generated during in vitro release studies were fitted to zero-order, first-order, Higuchi, Korsmeyer–Peppas, Kopcha, and Makoid–Banakar models. The release kinetics of captopril from most formulations followed a classical Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores located in the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed a predominance of diffusion relative to swelling or erosion throughout the entire test period. The drug release mechanism was also confirmed by the Makoid–Banakar and Korsmeyer–Peppas model exponents. This further supports a diffusion–release mechanism for most formulations. The models postulate that the total drug released is a summation of several mechanisms (viz., burst release, relaxation-induced controlled release, and diffusional release). These results also support the potential application of Eudragit/Methocel microspheres as a suitable sustained-release drug delivery system for captopril.
- Full Text:
- Date Issued: 2012
The use of response surface methodology in the evaluation of captopril microparticles manufactured using an oil in oil solvent evaporation technique
- Khamanga, Sandile M, Walker, Roderick B
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184221 , vital:44191 , xlink:href="https://doi.org/10.3109/02652048.2011.629744"
- Description: Captopril (CPT) microparticles were manufactured by solvent evaporation using acetone (dispersion phase) and liquid paraffin (manufacturing phase) with Eudragit® and Methocel® as coat materials. Design of experiments and response surface methodology (RSM) approaches were used to optimize the process. The microparticles were characterized based on the percent of drug released and yield, microcapsule size, entrapment efficiency and Hausner ratio. Differential scanning calorimetry (DSC), Infrared (IR) spectroscopy, scanning electron microscopy (SEM) and in vitro dissolution studies were conducted. The microcapsules were spherical, free-flowing and IR and DSC thermograms revealed that CPT was stable. The percent drug released was investigated with respect to Eudragit® RS and Methocel® K100M, Methocel® K15M concentrations and homogenizing speed. The optimal conditions for microencapsulation were 1.12 g Eudragit® RS, 0.67 g Methocel® K100M and 0.39 g Methocel® K15M at a homogenizing speed of 1643 rpm and 89% CPT was released. The value of RSM-mediated microencapsulation of CPT was elucidated.
- Full Text:
- Date Issued: 2012
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184221 , vital:44191 , xlink:href="https://doi.org/10.3109/02652048.2011.629744"
- Description: Captopril (CPT) microparticles were manufactured by solvent evaporation using acetone (dispersion phase) and liquid paraffin (manufacturing phase) with Eudragit® and Methocel® as coat materials. Design of experiments and response surface methodology (RSM) approaches were used to optimize the process. The microparticles were characterized based on the percent of drug released and yield, microcapsule size, entrapment efficiency and Hausner ratio. Differential scanning calorimetry (DSC), Infrared (IR) spectroscopy, scanning electron microscopy (SEM) and in vitro dissolution studies were conducted. The microcapsules were spherical, free-flowing and IR and DSC thermograms revealed that CPT was stable. The percent drug released was investigated with respect to Eudragit® RS and Methocel® K100M, Methocel® K15M concentrations and homogenizing speed. The optimal conditions for microencapsulation were 1.12 g Eudragit® RS, 0.67 g Methocel® K100M and 0.39 g Methocel® K15M at a homogenizing speed of 1643 rpm and 89% CPT was released. The value of RSM-mediated microencapsulation of CPT was elucidated.
- Full Text:
- Date Issued: 2012
- «
- ‹
- 1
- ›
- »