The photodynamic therapeutic activities and optical limiting properties of metalated asymmetric porphyrins and corroles
- Authors: Burgess, Kristen Paige
- Date: 2023-10-13
- Subjects: Porphyrins , Corrole , Photochemotherapy , Anti-infective agents , Nonlinear optics , Z-scan technique , Active oxygen , Time-dependent density functional theory , Chemical synthesis
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/424490 , vital:72158
- Description: Cancer is a devastating disease that is a leading cause of death worldwide. Despite the available cancer treatments, there is a significant need to improve the therapeutic approach towards this disease. Photodynamic therapy (PDT) is an alternative approach for treating cancer, which requires a photosensitiser, molecular oxygen and light. Although some porphyrin-based derivatives have been approved by the United States Food and Drug Administration (FDA) and other similar agencies elsewhere for photodynamic therapy, their relatively poor photophysicochemical properties mean that there is an ongoing need for new photosensitiser dyes. Singlet oxygen photosensitiser dyes can also be used to treat bacteria that develop antimicrobial resistance in the context of photodynamic antimicrobial chemotherapy (PACT). The main aim of this study was to synthesise and characterise a series of porphyrin dyes with 4-quinolinyl, thien-2-yl and 4-bromo-thien-2-yl meso-aryl groups and their Sn(IV) and In(III) complexes, as well as their corrole analogues. Corroles are contracted macrocycles that have interesting optical properties. The corroles selected for study were found to be difficult to synthesise and purify and had unfavourable photophysicochemical properties and were thus omitted from the PDT and PACT biological applications within this thesis. High- and low-symmetry A4 and ABAB type meso-tetraarylporphyrins porphyrins were synthesised to improve the photophysicochemical properties of the photosensitisers; the utility of these dyes as photosensitisers was studied against the MCF-7 breast cancer cell line for PDT and against Staphylococcus aureus and Escherichia coli for PACT. The thienyl-2-yl rings were introduced to red shift the lowest energy Q band towards the phototherapeutic window, while quaternisation of the nitrogen and sulfur atoms of the 4-quinolinyl and thien-2-yl rings to introduce a cationic nature was explored to improve the bioavailability of the drugs and uptake into the target cell walls for improved efficacy. Heavy Sn(IV) and In(III) central metal ions were introduced to enhance the singlet oxygen quantum yields and limit aggregation through axial ligation. The bromine atoms of the 4-bromo-thien-2-yl meso-aryl rings were also introduced to enhance the singlet oxygen quantum yields of the dyes. Furthermore, the utility of the porphyrin and corrole molecules for optical limiting properties to limit laser radiation to protect optical devices, including eyes, was explored by the z-scan technique. One of the dyes studied, Sn(IV) tetrathien-2-ylporphyrin, that exhibited the most favourable reverse saturable absorbance (RSA) response was embedded into a poly(bisphenol carbonate A) polymer thin film to further explore its suitability for practical applications. , Thesis (MSc) -- Faculty of Science, Chemistry, 2023
- Full Text:
- Date Issued: 2023-10-13
- Authors: Burgess, Kristen Paige
- Date: 2023-10-13
- Subjects: Porphyrins , Corrole , Photochemotherapy , Anti-infective agents , Nonlinear optics , Z-scan technique , Active oxygen , Time-dependent density functional theory , Chemical synthesis
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/424490 , vital:72158
- Description: Cancer is a devastating disease that is a leading cause of death worldwide. Despite the available cancer treatments, there is a significant need to improve the therapeutic approach towards this disease. Photodynamic therapy (PDT) is an alternative approach for treating cancer, which requires a photosensitiser, molecular oxygen and light. Although some porphyrin-based derivatives have been approved by the United States Food and Drug Administration (FDA) and other similar agencies elsewhere for photodynamic therapy, their relatively poor photophysicochemical properties mean that there is an ongoing need for new photosensitiser dyes. Singlet oxygen photosensitiser dyes can also be used to treat bacteria that develop antimicrobial resistance in the context of photodynamic antimicrobial chemotherapy (PACT). The main aim of this study was to synthesise and characterise a series of porphyrin dyes with 4-quinolinyl, thien-2-yl and 4-bromo-thien-2-yl meso-aryl groups and their Sn(IV) and In(III) complexes, as well as their corrole analogues. Corroles are contracted macrocycles that have interesting optical properties. The corroles selected for study were found to be difficult to synthesise and purify and had unfavourable photophysicochemical properties and were thus omitted from the PDT and PACT biological applications within this thesis. High- and low-symmetry A4 and ABAB type meso-tetraarylporphyrins porphyrins were synthesised to improve the photophysicochemical properties of the photosensitisers; the utility of these dyes as photosensitisers was studied against the MCF-7 breast cancer cell line for PDT and against Staphylococcus aureus and Escherichia coli for PACT. The thienyl-2-yl rings were introduced to red shift the lowest energy Q band towards the phototherapeutic window, while quaternisation of the nitrogen and sulfur atoms of the 4-quinolinyl and thien-2-yl rings to introduce a cationic nature was explored to improve the bioavailability of the drugs and uptake into the target cell walls for improved efficacy. Heavy Sn(IV) and In(III) central metal ions were introduced to enhance the singlet oxygen quantum yields and limit aggregation through axial ligation. The bromine atoms of the 4-bromo-thien-2-yl meso-aryl rings were also introduced to enhance the singlet oxygen quantum yields of the dyes. Furthermore, the utility of the porphyrin and corrole molecules for optical limiting properties to limit laser radiation to protect optical devices, including eyes, was explored by the z-scan technique. One of the dyes studied, Sn(IV) tetrathien-2-ylporphyrin, that exhibited the most favourable reverse saturable absorbance (RSA) response was embedded into a poly(bisphenol carbonate A) polymer thin film to further explore its suitability for practical applications. , Thesis (MSc) -- Faculty of Science, Chemistry, 2023
- Full Text:
- Date Issued: 2023-10-13
Composition and fate of triclosan in the sludge from wastewater treatment in Grahamstown, South Africa and Tiaret, Algeria
- Authors: Ncube, Mbonisi
- Date: 2017
- Subjects: Sewage sludge , Sewage Purification South Africa Grahamstown , Sewage Purification Algeria Tiaret , Sewage sludge as fertilizer , Anti-infective agents
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65156 , vital:28697
- Description: Physicochemical properties such as pH, specific surface area (SSA), cationic exchange capacity (CEC), loss on ignition (LOI), pathogens, plant nutrients (nitrates, ammonium and phosphates), and heavy metals (manganese, copper, lead and cadmium) were determined for sewage sludge from Grahamstown and Tiaret. The values obtained were log transformed thereafter a t-test at 5 % level of significance was used to test for the difference in each parameter for both sludges. The pH of sludge was determined in 1:3 water, 16 water, 1:3 0.01 M calcium chloride and 1:3 1 M potassium chloride. The pH for Grahamstown and Tiaret sludge were in the ranges of 6.66-7.11 and 7.88-8.18 respectively. The SSA values for Grahamstown and Tiaret were 218 ± 108 and 261 ± 99.9 m2/g, and the CEC values were 119 ± 2.09 and 136 ± 6.03 mEq/100, respectively. The LOI values obtained were 1.33 ± 0.03 and 1.48 ± 0.11 % for Grahamstown and Tiaret, respectively. E. coll and heterotrophic bacteria were the pathogens determined, and were extracted from sludge using sterile saline and nutrient broth. The concentration of E. coll in Grahamstown and Tiaret sludge were 468 ± 7.63 and 7769 ± 1268 CFU/g d.w and for heterotrophic bacteria were 1.17x109 ± 7.42x108 and 1.43x109 ± 9.11 x108 CFU/g d.w. For Grahamstown sludge, the concentration of nitrates, ammonium and phosphates were 55.61 ± 55.20 mg/g d.w, 6.60 ± 2.36 mg/g d.w and 1.40 ± 0.30 mg/g d.w, respectively. For Tiaret sludge, the concentration of nitrates, ammonium and phosphates were 2.56 ± 2.90 mg/g d.w, 0.64 ± 0.45 mg/g d.w and 0.24 ± 0.19 mg/g d.w, respectively. The concentration of Mn, Cu, Pb and Cd in Grahamstown sludge were 423 ± 101, 353 ± 92, 40.2 ± 20 and 0.0 mg/kg d.w respectively, and for Tiaret sludge, the corresponding concentrations were 358± 295, 549±50, 1427± 1352 and 1.54 ± 0.61 mg/kg d.w. Sewage sludge was found to contain Triclosan, and solubility studies of the compound were conducted using sodium deoxycholate and sodium lithocholate. The apparent solubilities and rate constants indicated in brackets of TCS at 37 °C were 35.4 ± 1.21 mg/L (1.28 ± 0.36 Hr-) and 14.4 ± 0.34 mg/L (0.99 ± 0.17 Hr-) in sodium lithocholate and sodium deoxycholate, respectively. The apparent solubilities and rate constants indicated in brackets of TCS at 15 °C were 32.3 ± 0.88 mg/L (2.16 ± 0.80 Hr-) and 14.2 ± 0.39 mg/L (1.02 ± 0.17 Hr-) in sodium lithocholate and sodium deoxycholate, respectively. Triclosan was extracted from sludge using 1 g/L sodium deoxycholate and the determined concentration were 142 ± 33.5 gg/g d.w for Grahamstown sludge and 0-12 gg/g d.w for Tiaret sludge. Finally plant growth studies were conducted on radish and garden cress plants using Grahamstown sludge at 0, 20, 40, 80 and 100 % treatments. Statistical analysis (t-test and Kruskal-Wallis) at 5 % level of significance was done to compare growth parameters between control and different sludge treatments. For radish plants, the values for plant height, root length, number of leaves, leaf length and dry mass were 28.4-80-7 mm, 4.3-44.7 mm, 3.3-17.0 mm, 2.3-4.0 leaves and 6.3-15.3 %, respectively. For garden cress, the values for plant height, root length, number of leaves, leaf length and dry mass were 13.7-25.0 mm, 7.7-20.3 mm, 5.7-8.3 leaves, 3.0-8.3 mm and 8.8-15.0 %, respectively. Twenty percent (20 %) sludge treatment gave the best results in radish and garden cress plants with respect to plant height, root length, number of leaves and dry mass. Triclosan concentration in radish and garden cress plants was below the detection limit of 32.4 gg/g d.w. , Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2017
- Full Text:
- Date Issued: 2017
- Authors: Ncube, Mbonisi
- Date: 2017
- Subjects: Sewage sludge , Sewage Purification South Africa Grahamstown , Sewage Purification Algeria Tiaret , Sewage sludge as fertilizer , Anti-infective agents
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65156 , vital:28697
- Description: Physicochemical properties such as pH, specific surface area (SSA), cationic exchange capacity (CEC), loss on ignition (LOI), pathogens, plant nutrients (nitrates, ammonium and phosphates), and heavy metals (manganese, copper, lead and cadmium) were determined for sewage sludge from Grahamstown and Tiaret. The values obtained were log transformed thereafter a t-test at 5 % level of significance was used to test for the difference in each parameter for both sludges. The pH of sludge was determined in 1:3 water, 16 water, 1:3 0.01 M calcium chloride and 1:3 1 M potassium chloride. The pH for Grahamstown and Tiaret sludge were in the ranges of 6.66-7.11 and 7.88-8.18 respectively. The SSA values for Grahamstown and Tiaret were 218 ± 108 and 261 ± 99.9 m2/g, and the CEC values were 119 ± 2.09 and 136 ± 6.03 mEq/100, respectively. The LOI values obtained were 1.33 ± 0.03 and 1.48 ± 0.11 % for Grahamstown and Tiaret, respectively. E. coll and heterotrophic bacteria were the pathogens determined, and were extracted from sludge using sterile saline and nutrient broth. The concentration of E. coll in Grahamstown and Tiaret sludge were 468 ± 7.63 and 7769 ± 1268 CFU/g d.w and for heterotrophic bacteria were 1.17x109 ± 7.42x108 and 1.43x109 ± 9.11 x108 CFU/g d.w. For Grahamstown sludge, the concentration of nitrates, ammonium and phosphates were 55.61 ± 55.20 mg/g d.w, 6.60 ± 2.36 mg/g d.w and 1.40 ± 0.30 mg/g d.w, respectively. For Tiaret sludge, the concentration of nitrates, ammonium and phosphates were 2.56 ± 2.90 mg/g d.w, 0.64 ± 0.45 mg/g d.w and 0.24 ± 0.19 mg/g d.w, respectively. The concentration of Mn, Cu, Pb and Cd in Grahamstown sludge were 423 ± 101, 353 ± 92, 40.2 ± 20 and 0.0 mg/kg d.w respectively, and for Tiaret sludge, the corresponding concentrations were 358± 295, 549±50, 1427± 1352 and 1.54 ± 0.61 mg/kg d.w. Sewage sludge was found to contain Triclosan, and solubility studies of the compound were conducted using sodium deoxycholate and sodium lithocholate. The apparent solubilities and rate constants indicated in brackets of TCS at 37 °C were 35.4 ± 1.21 mg/L (1.28 ± 0.36 Hr-) and 14.4 ± 0.34 mg/L (0.99 ± 0.17 Hr-) in sodium lithocholate and sodium deoxycholate, respectively. The apparent solubilities and rate constants indicated in brackets of TCS at 15 °C were 32.3 ± 0.88 mg/L (2.16 ± 0.80 Hr-) and 14.2 ± 0.39 mg/L (1.02 ± 0.17 Hr-) in sodium lithocholate and sodium deoxycholate, respectively. Triclosan was extracted from sludge using 1 g/L sodium deoxycholate and the determined concentration were 142 ± 33.5 gg/g d.w for Grahamstown sludge and 0-12 gg/g d.w for Tiaret sludge. Finally plant growth studies were conducted on radish and garden cress plants using Grahamstown sludge at 0, 20, 40, 80 and 100 % treatments. Statistical analysis (t-test and Kruskal-Wallis) at 5 % level of significance was done to compare growth parameters between control and different sludge treatments. For radish plants, the values for plant height, root length, number of leaves, leaf length and dry mass were 28.4-80-7 mm, 4.3-44.7 mm, 3.3-17.0 mm, 2.3-4.0 leaves and 6.3-15.3 %, respectively. For garden cress, the values for plant height, root length, number of leaves, leaf length and dry mass were 13.7-25.0 mm, 7.7-20.3 mm, 5.7-8.3 leaves, 3.0-8.3 mm and 8.8-15.0 %, respectively. Twenty percent (20 %) sludge treatment gave the best results in radish and garden cress plants with respect to plant height, root length, number of leaves and dry mass. Triclosan concentration in radish and garden cress plants was below the detection limit of 32.4 gg/g d.w. , Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2017
- Full Text:
- Date Issued: 2017
- «
- ‹
- 1
- ›
- »