- Title
- Compensation for distribution of timing and reference signals over optical fibre networks for telescope arrays
- Creator
- Wassin, Shukree
- Subject
- Fiber optics
- Subject
- Optical communications Very large array telescopes Optical fiber detectors
- Date Issued
- 2018
- Date
- 2018
- Type
- Thesis
- Type
- Doctoral
- Type
- DPhil
- Identifier
- http://hdl.handle.net/10948/36425
- Identifier
- vital:33941
- Description
- Significant advancements and developments have been made in optical frequency standards, in recent years. In order to verify the accuracy and preciseness of the disseminated RF signal, it is essential to compare its stability with the standards provided in literature as well as by metrology institutes. However, conventional frequency comparison techniques via satellites have extremely inferior stability qualities. As a result, the need for an alternative ultra-high precision RF transfer method presented itself. Highly accurate and precise frequency dissemination across optical fiber has proved a leading contender and a possible solution. When compared to conventional data transfer media, optical fiber has proven to be more superior and yields lower transmission errors and is immune to radio frequency interference. A further quality of optical fibre is that its transmission distance can be extended to greater degree than the traditional coaxial cable due to its low loss property. This thesis deals with the compensation of phase noise in single mode optical fibre. Phase noise degrades the performance and stability of the RF signal as well as the optical carrier frequency across long-haul optical networks. This work begins by experimentally demonstrating a unique and novel way for measuring the round-trip optical fibre latency times. The technique is based on all optical wavelength conversion using a stable PPS injection signal. The result highlighted the importance for active phase error compensation along a fibre link. Various computer simulations were used to study the influence of temperature fluctuation on the optical fibre. The first ever error signals generated at NMU was experimentally demonstrated. Results illustrated that, by minimizing the error voltage the phase difference between the transmitted and reference signals were reduced to zero. Performance analysis testing of the VCSEL phase correction actuator showed that majority of the dither iterations that induced the phase compensation took approximately 0.15 s. Residual frequency instabilities of 3.39791 x 10-12 at 1 s and 8.14848 x 10-12 at 103 s was measured when the 26 km G.655 fibre link was running freely. Experimental results further showed that the relative frequency stabilities measured at 1 s and 103 s were 4.43902 x 10-12 and 1.62055 x 10-13 during active compensation, respectively. The novel work presented in this thesis is exciting since the VCSEL is used as the optical source as well as the phase correction actuator. The benefits of such a device is that is reduces system costs and complexities.
- Format
- ix, 131 leaves
- Format
- Publisher
- Nelson Mandela University
- Publisher
- Faculty of Science
- Language
- English
- Rights
- Nelson Mandela University
- Hits: 1402
- Visitors: 1400
- Downloads: 93
Collections
NMU School of Computer Science, Mathematics, Physics and Statistics
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | SOURCE1 | Shukree Wassin.pdf | 17 MB | Adobe Acrobat PDF | View Details Download |