Night-time gravity waves detected with multi-frequency airglow imager
- Authors: Machubeng, Karabo Pebane
- Date: 2021-04
- Subjects: Gravity waves , Airglow , Gravity waves -- Seasonal variations , All Sky Imager
- Language: English
- Type: thesis , text , Masters , MSc
- Identifier: http://hdl.handle.net/10962/178341 , vital:42931
- Description: This thesis shows the statistics of atmospheric gravity waves (AGWs) observed in the OI emission 557.7 nm at _97 km altitude using an all-sky imager based in Sutherland, South Africa (32.37_ S, 20.81_ E) in the year 2017. The wavelengths were determined using the propagation vector method, velocity was determined using the cross correlation of 1D FFT and the period was determined using the equation that relates wavelength and velocity. It was found that the horizontal wavelength in summer was almost evenly distributed between 10 and 40 km and for autumn, winter and spring were mostly between 10 and 30 km. The favoured speeds were between 40 and 50 m/s in autumn, as well as 30 and 50 m/s in summer, but the AGWs in winter had a bimodal speed distribution of 20 - 40 and 50 - 70 m/s. The majority of periods observed in all seasons were less than 20 minutes with a dominant peak of 5 - 10 minutes in autumn and spring. There was no favoured propagation direction for spring, but AGWs favoured a southeastward propagation in summer, and a southward propagation in autumn and winter. , Thesis (MSc) -- Faculty of Science, Physics and Electronics, 2021
- Full Text:
- Date Issued: 2021-04
Observations of cosmic re-ionisation with the Hydrogen Epoch of Reionization Array: simulations of closure phase spectra
- Authors: Charles, Ntsikelelo
- Date: 2021-04
- Subjects: Epoch of reionization , Space interferometry , Astronomy -- Observations , Closure phase spectra
- Language: English
- Type: thesis , text , Masters , MSc
- Identifier: http://hdl.handle.net/10962/174470 , vital:42480
- Description: The 21 cm transition from neutral Hydrogen promises to be the best observational probe of the Epoch of Reionisation. It has driven the construction of the new generation of low frequency radio interferometric arrays, including the Hydrogen Epoch of Reionization Array (HERA). The main difficulty in measuring the 21 cm signal is the presence of bright foregrounds that require very accurate interferometric calibration. Thyagarajan et al. (2018) proposed the use of closure phase quantities as a means to detect the 21 cm signal, which has the advantage of being independent (to first order) from calibration errors and therefore, bypasses the need for accurate calibration. Closure phases are, however, affected by so-called direction dependent effects, e.g. the fact that the dishes - or antennas - of an interferometric array are not identical to each other and , therefore, yield different antenna primary beam responses. In this thesis, we investigate the impact of direction dependent effects on closure quantities and simulate the impact that primary antenna beams affected by mutual coupling have on the foreground closure phase and its power spectrum i.e. the power spectrum of the bispectrum phase (Thyagarajan et al., 2020). Our simulations show that primary beams affected by mutual coupling lead to an overall leakage of foreground power in the so-called EoR window, i.e. power from smooth-spectrum foregrounds is confined to low k modes. We quantified this effect and found that the leakage is up to ~ 8 orders magnitude higher than the case of an ideal beam at kǁ > 0:5 h Mpc-1. We also found that the foreground leakage is worse when edge antennas are included, as they have a more different primary beam compared to antennas at the centre of the array. The leakage magnitude is worse when bright foregrounds appear in the antenna sidelobes, as expected. Our simulations provide a useful framework to interpret observations and assess which power spectrum region is expected to be most contaminated by foreground power leakage.
- Full Text:
- Date Issued: 2021-04
Accelerated implementations of the RIME for DDE calibration and source modelling
- Authors: Van Staden, Joshua
- Date: 2021
- Subjects: Radio astronomy , Radio inferometers , Radio inferometers -- Calibration , Radio astronomy -- Data processing , Radio inferometers -- Data processing , Radio inferometers -- Calibration -- Data processing
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/172422 , vital:42199
- Description: Second- and third-generation calibration methods filter out subtle effects in interferometer data, and therefore yield significantly higher dynamic ranges. The basis of these calibration techniques relies on building a model of the sky and corrupting it with models of the effects acting on the sources. The sensitivities of modern instruments call for more elaborate models to capture the level of detail that is required to achieve accurate calibration. This thesis implements two types of models to be used in for second- and third-generation calibration. The first model implemented is shapelets, which can be used to model radio source morphologies directly in uv space. The second model implemented is Zernike polynomials, which can be used to represent the primary beam of the antenna. We implement these models in the CODEX-AFRICANUS package and provide a set of unit tests for each model. Additionally, we compare our implementations against other methods of representing these objects and instrumental effects, namely NIFTY-GRIDDER against shapelets and a FITS-interpolation method against the Zernike polynomials. We find that to achieve sufficient accuracy, our implementation of the shapelet model has a higher runtime to that of the NIFTY-GRIDDER. However, the NIFTY-GRIDDER cannot simulate a component-based sky model while the shapelet model can. Additionally, the shapelet model is fully parametric, which allows for integration into a parameterised solver. We find that, while having a smaller memory footprint, our Zernike model has a greater computational complexity than that of the FITS-interpolated method. However, we find that the Zernike implementation has floating-point accuracy in its modelling, while the FITS-interpolated model loses some accuracy through the discretisation of the beam.
- Full Text:
- Date Issued: 2021
Parametrised gains for direction-dependent calibration
- Authors: Russeeaeon, Cyndie
- Date: 2021
- Subjects: Radio astronomy , Radio inferometers , Radio inferometers -- Calibration
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/172400 , vital:42196
- Description: Calibration in radio interferometry describes the process of estimating and correcting for instrumental errors from data. Direction-Dependent (DD) calibration entails correcting for corruptions which vary across the sky. For small field of view observations, DD corruptions can be ignored but for wide fild observations, it is crucial to account for them. Traditional maximum likelihood calibration is not necessarily efficient in low signal-to-noise ratio (SNR) scenarios and this can lead to ovefitting. This can bias continuum subtraction and hence, restrict the spectral line studies. Since DD effects are expected to vary smoothly across the sky, the gains can be parametrised as a smooth function of the sky coordinates. Hence, we implement a solver where the atmosphere is modelled using a time-variant 2-dimensional phase screen with an arbitrary known frequency dependence. We assume arbitrary linear basis functions for the gains over the phase screen. The implemented solver is ptimised using the diagonal approximation of the Hessian as shown in previous studies. We present a few simulations to illustrate the performance of the solver.
- Full Text:
- Date Issued: 2021
A 150 MHz all sky survey with the Precision Array to Probe the Epoch of Reionization
- Authors: Chege, James Kariuki
- Date: 2020
- Subjects: Epoch of reionization -- Research , Astronomy -- Observations , Radio interferometers
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/117733 , vital:34556
- Description: The Precision Array to Probe the Epoch of Reionization (PAPER) was built to measure the redshifted 21 cm line of hydrogen from cosmic reionization. Such low frequency observations promise to be the best means of understanding the cosmic dawn; when the first galaxies in the universe formed, and also the Epoch of Reionization; when the intergalactic medium changed from neutral to ionized. The major challenges to these observations is the presence of astrophysical foregrounds that are much brighter than the cosmological signal. Here, I present an all-sky survey at 150 MHz obtained from the analysis of 300 hours of PAPER observations. Particular focus is given to the calibration and imaging techniques that need to deal with the wide field of view of a non-tracking instrument. The survey covers ~ 7000 square degrees of the southern sky. From a sky area of 4400 square degrees out of the total survey area, I extract a catalogue of sources brighter than 4 Jy whose accuracy was tested against the published GLEAM catalogue, leading to a fractional difference rms better than 20%. The catalogue provides an all-sky accurate model of the extragalactic foreground to be used for the calibration of future Epoch of Reionization observations and to be subtracted from the PAPER observations themselves in order to mitigate the foreground contamination.
- Full Text:
- Date Issued: 2020
A Bayesian approach to tilted-ring modelling of galaxies
- Authors: Maina, Eric Kamau
- Date: 2020
- Subjects: Bayesian statistical decision theory , Galaxies , Radio astronomy , TiRiFiC (Tilted Ring Fitting Code) , Neutral hydrogen , Spectroscopic data cubes , Galaxy parametrisation
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/145783 , vital:38466
- Description: The orbits of neutral hydrogen (H I) gas found in most disk galaxies are circular and also exhibit long-lived warps at large radii where the restoring gravitational forces of the inner disk become weak (Spekkens and Giovanelli 2006). These warps make the tilted-ring model an ideal choice for galaxy parametrisation. Analysis software utilizing the tilted-ring-model can be grouped into two and three-dimensional based software. Józsa et al. (2007b) demonstrated that three dimensional based software is better suited for galaxy parametrisation because it is affected by the effect of beam smearing only by increasing the uncertainty of parameters but not with the notorious systematic effects observed for two-dimensional fitting techniques. TiRiFiC, The Tilted Ring Fitting Code (Józsa et al. 2007b), is a software to construct parameterised models of high-resolution data cubes of rotating galaxies. It uses the tilted-ring model, and with that, a combination of some parameters such as surface brightness, position angle, rotation velocity and inclination, to describe galaxies. TiRiFiC works by directly fitting tilted-ring models to spectroscopic data cubes and hence is not affected by beam smearing or line-of-site-effects, e.g. strong warps. Because of that, the method is unavoidable as an analytic method in future Hi surveys. In the current implementation, though, there are several drawbacks. The implemented optimisers search for local solutions in parameter space only, do not quantify correlations between parameters and cannot find errors of single parameters. In theory, these drawbacks can be overcome by using Bayesian statistics, implemented in Multinest (Feroz et al. 2008), as it allows for sampling a posterior distribution irrespective of its multimodal nature resulting in parameter samples that correspond to the maximum in the posterior distribution. These parameter samples can be used as well to quantify correlations and find errors of single parameters. Since this method employs Bayesian statistics, it also allows the user to leverage any prior information they may have on parameter values.
- Full Text:
- Date Issued: 2020
A study of why some physic concepts in the South African Physical Science curriculum are poorly understood in order to develop a targeted action-research intervention for Newton’s second law
- Authors: Cobbing, Kathleen Margaret
- Date: 2020
- Subjects: Physics -- Study and teaching (Secondary) -- South Africa , Physics -- Examinations, questions, etc. -- South Africa , Motion -- Study and teaching (Secondary) -- South Africa
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/146903 , vital:38575
- Description: Globally, many students show a poor understanding of concepts in high school physics and lack the necessary problem-solving skills that the course demands. The application of Newton’s second law was found to be particularly problematic through document analysis of South African examination feedback reports, as well as from an analysis of the physics examinations at a pair of well-resourced South African independent schools that follow the Independent Examination Board curriculum. Through an action-research approach, a resource for use by students was designed and modified to improve students’ understanding of this concept, while modelling problemsolving methods. The resource consisted of brief revision notes, worked examples and scaffolded exercises. The design of the resource was influenced by the theory of cognitive apprenticeship, cognitive load theory and conceptual change theory. One of the aims of the resource was to encourage students to translate between the different representations of a problem situation: symbolic, abstract, model and concrete. The impact of this resource was evaluated at a pair of schools using a mixed methods approach. This incorporated pre- and post-tests for a quantitative assessment, qualitative student evaluations and the analysis of examination scripts. There was an improvement from pre- to post-test for all four iterations of the intervention and these improvements were shown to be significant. The use of the resource led to an increase in the quality and quantity of diagrams drawn by students in subsequent assessments.
- Full Text:
- Date Issued: 2020
Finite precision arithmetic in Polyphase Filterbank implementations
- Authors: Myburgh, Talon
- Date: 2020
- Subjects: Radio interferometers , Interferometry , Radio telescopes , Gate array circuits , Floating-point arithmetic , Python (Computer program language) , Polyphase Filterbank , Finite precision arithmetic , MeerKAT
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/146187 , vital:38503
- Description: The MeerKAT is the most sensitive radio telescope in its class, and it is important that systematic effects do not limit the dynamic range of the instrument, preventing this sensitivity from being harnessed for deep integrations. During commissioning, spurious artefacts were noted in the MeerKAT passband and the root cause was attributed to systematic errors in the digital signal path. Finite precision arithmetic used by the Polyphase Filterbank (PFB) was one of the main factors contributing to the spurious responses, together with bugs in the firmware. This thesis describes a software PFB simulator that was built to mimic the MeerKAT PFB and allow investigation into the origin and mitigation of the effects seen on the telescope. This simulator was used to investigate the effects in signal integrity of various rounding techniques, overflow strategies and dual polarisation processing in the PFB. Using the simulator to investigate a number of different signal levels, bit-width and algorithmic scenarios, it gave insight into how the periodic dips occurring in the MeerKAT passband were the result of the implementation using an inappropriate rounding strategy. It further indicated how to select the best strategy for preventing overflow while maintaining high quantization effciency in the FFT. This practice of simulating the design behaviour in the PFB independently of the tools used to design the DSP firmware, is a step towards an end-to-end simulation of the MeerKAT system (or any radio telescope using nite precision digital signal processing systems). This would be useful for design, diagnostics, signal analysis and prototyping of the overall instrument.
- Full Text:
- Date Issued: 2020
Observations of diffuse radio emission in the Abell 773 galaxy cluster
- Authors: Sichone, Gift L
- Date: 2020
- Subjects: Galaxies -- Clusters -- Observations , Radio astronomy -- Observations , Astrophysics -- South Africa , Westerbork Radio Telescope , A773 galaxy cluster , Astronomy -- Observations , Radio sources (Astronomy
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/144945 , vital:38394
- Description: In this thesis, we present 18 and 21 cm observations of the A773 galaxy cluster observed with the Westerbork radio telescope. The final 18 and 21 cm images achieve a noise level of 0.018 mJy beam‾ 1 and 0.025 mJy beam-1 respectively. After subtracting the compact sources, the low resolution images show evidence of a radio halo at 18 cm, whereas its presence is more uncertain in the low resolution 21 cm images due the presence of residual sidelobes from bright sources. In the joint analysis of both frequencies, the radio halo has a 5.37 arcmin2 area with a 6.76 mJy flux density. Further observations and analysis are, however, required to fully characterize its properties.
- Full Text:
- Date Issued: 2020
Observations of diffuse radio emission in the Perseus Galaxy Cluster
- Authors: Mungwariri, Clemence
- Date: 2020
- Subjects: Galaxies -- Clusters , Radio sources (Astronomy) , Radio interferometers , Perseus Galaxy Cluster , Diffuse radio emission
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/143325 , vital:38233
- Description: In this thesis we analysed Westerbork observations of the Perseus Galaxy Cluster at 1380 MHz. Observations consist of two different pointings, covering a total of ∼ 0.5 square degrees, one including the known mini halo and the source 3C 84, the other centred on the source 3C 83.1 B. We obtained images with 83 μJy beam⁻¹ and 240 μJy beam⁻¹ noise rms for the two pointings respectively. We achieved a 60000 : 1 dynamic range in the image containing the bright 3C 84 source. We imaged the mini halo surrounding 3C 84 at high sensitivity, measuring its diameter to be ∼140 kpc and its power 4 x 10²⁴ W Hz⁻¹. Its morphology agrees quite well with that observed at 240 MHz (e.g. Gendron-Marsolais et al., 2017). We measured the flux density of 3C 84 to be 20.5 ± 0.4 Jy at the 2007 epoch, consistent with a factor of ∼2 increase since the 1960s.
- Full Text:
- Date Issued: 2020
A pilot wide-field VLBI survey of the GOODS-North field
- Authors: Akoto-Danso, Alexander
- Date: 2019
- Subjects: Radio astronomy , Very long baseline interferometry , Radio interometers , Imaging systems in astronomy , Hubble Space Telescope (Spacecraft) -- Observations
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/72296 , vital:30027
- Description: Very Long Baseline Interferometry (VLBI) has significant advantages in disentangling active galactic nuclei (AGN) from star formation, particularly at intermediate to high-redshift due to its high angular resolution and insensitivity to dust. Surveys using VLBI arrays are only just becoming practical over wide areas with numerous developments and innovations (such as multi-phase centre techniques) in observation and data analysis techniques. However, fully automated pipelines for VLBI data analysis are based on old software packages and are unable to incorporate new calibration and imaging algorithms. In this work, the researcher developed a pipeline for VLBI data analysis which integrates a recent wide-field imaging algorithm, RFI excision, and a purpose-built source finding algorithm specifically developed for the 64kx64k wide-field VLBI images. The researcher used this novel pipeline to process 6% (~ 9 arcmin2 of the total 160 arcmin2) of the data from the CANDELS GOODS- North extragalactic field at 1.6 GHz. The milli-arcsec scale images have an average rms of a ~ 10 uJy/beam. Forty four (44) candidate sources were detected, most of which are at sub-mJy flux densities, having brightness temperatures and luminosities of >5x105 K and >6x1021 W Hz-1 respectively. This work demonstrates that automated post-processing pipelines for wide-field, uniform sensitivity VLBI surveys are feasible and indeed made more efficient with new software, wide-field imaging algorithms and more purpose-built source- finders. This broadens the discovery space for future wide-field surveys with upcoming arrays such as the African VLBI Network (AVN), MeerKAT and the Square Kilometre Array (SKA).
- Full Text:
- Date Issued: 2019
Foreground simulations for observations of the global 21-cm signal
- Authors: Klutse, Diana
- Date: 2019
- Subjects: Cosmic background radiation , Astronomy -- Observations , Electromagnetic waves , Radiation, Background
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/76398 , vital:30557
- Description: The sky-averaged (global) spectrum of the redshifted 21-cm line promises to be a direct probe of the Dark Ages, the period before the first luminous sources formed and the Epoch of Reionization during which these sources produced enough ionizing photons to ionize the neutral intergalactic medium. However, observations of this signal are contaminated by both astrophysical foregrounds which are orders of magnitude brighter than the cosmological signal and by non-astrophysical and non-ideal instrumental effects. It is therefore crucial to understand all these data components and their impacts on the cosmological signal, for successful signal extraction. In this view, we investigated the impact that small scale spatial structures of diffuse Galactic foreground has on the foreground spectrum as observed by a global 21-cm observation. We simulated two different sets of observations using a realistic dipole beam model of two synchotron foreground templates that differ from each other in the small scale structure: the original 408 MHz all-sky map by Haslam et al. (1982) and a version where the calibration was improved to remove artifcats and point sources (Remazeilles et al., 2015). We generated simulated foreground spectra and modeled them using a polynomial expansion in frequency. We found that the different foreground templates have a modest impact on the simulated spectra, generate differences up to 2% in the root mean square of residual spectra after the log-polynomial best fit was subtracted out.
- Full Text:
- Date Issued: 2019
Machine learning methods for calibrating radio interferometric data
- Authors: Zitha, Simphiwe Nhlanhla
- Date: 2019
- Subjects: Calibration , Radio astronomy -- Data processing , Radio astronomy -- South Africa , Karoo Array Telescope (South Africa) , Radio telescopes -- South Africa , Common Astronomy Software Application (Computer software)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/97096 , vital:31398
- Description: The applications of machine learning have created an opportunity to deal with complex problems currently encountered in radio astronomy data processing. Calibration is one of the most important data processing steps required to produce high dynamic range images. This process involves the determination of calibration parameters, both instrumental and astronomical, to correct the collected data. Typically, astronomers use a package such as Common Astronomy Software Applications (CASA) to compute the gain solutions based on regular observations of a known calibrator source. In this work we present applications of machine learning to first generation calibration (1GC), using the KAT-7 telescope environmental and pointing sensor data recorded during observations. Applying machine learning to 1GC, as opposed to calculating the gain solutions in CASA, has shown evidence of reducing computation, as well as accurately predict the 1GC gain solutions representing the behaviour of the antenna during an observation. These methods are computationally less expensive, however they have not fully learned to generalise in predicting accurate 1GC solutions by looking at environmental and pointing sensors. We call this multi-output regression model ZCal, which is based on random forest, decision trees, extremely randomized trees and K-nearest neighbor algorithms. The prediction error obtained during the testing of our model on testing data is ≈ 0.01 < rmse < 0.09 for gain amplitude per antenna, and 0.2 rad < rmse <0.5 rad for gain phase. This shows that the instrumental parameters used to train our model more strongly correlate with gain amplitude effects than phase.
- Full Text:
- Date Issued: 2019
Statistical study of traveling ionospheric disturbances over South Africa
- Authors: Mahlangu, Daniel Fiso
- Date: 2019
- Subjects: Ionosphere -- Research , Sudden ionospheric disturbances , Gravity waves , Magnetic storms
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/76387 , vital:30556
- Description: This thesis provides a statistical analysis of traveling ionospheric disturbances (TIDs) in South Africa. The velocities of the TIDs were determined from total electron content (TEC) maps using particle image velocimetry (PIV). The periods were determined using Morlet function in wavelet analysis. The TIDs were grouped into four categories: daytime, twilight, nighttime TIDs, and those TIDs that occurred during magnetic storms. It was found that daytime medium scale TIDs (MSTIDs) propagated equatorward in all seasons (summer, autumn, winter, and spring), with velocities of about 114 to 213 m/s. Their maximum occurrence was in winter between 15:00 and 16:00 LT. The daytime large scale (TIDs) LSTIDs propagated equatorward with velocities of approximately 455 to 767 m/s. Their highest occurrence was in summer, between 12:00-13:00 LT. Most of the these TIDs (about 78%) were observed during the passing of the morning solar terminator. This implied that the morning terminator was more effective in instigating TIDs. Only a few nighttime TIDs were observed and therefore their behavior could not be statistically inferred. The TIDs that occurred during magnetically disturbed conditions propagated equatorward. This indicated that their source mechanism was atmospheric gravity waves generated at the onset of geomagnetic storms.
- Full Text:
- Date Issued: 2019
The dispersion measure in broadband data from radio pulsars
- Authors: Rammala, Isabella
- Date: 2019
- Subjects: Pulsars , Radio astrophysics , Astrophsyics , Broadband communication systems
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/67857 , vital:29157
- Description: Modern day radio telescopes make use of wideband receivers to take advantage of the broadband nature of the radio pulsar emission. We ask how does the use of such broadband pulsar data affect the measured pulsar dispersion measure (DM). Previous works have shown that, although the exact pulsar radio emission processes are not well understood, observations reveal evidence of possible frequency dependence on the emission altitudes in the pulsar magnetosphere, a phenomenon known as the radius-to-frequency mapping (RFM). This frequency dependence due to RFM can be embedded in the dispersive delay of the pulse profiles, normally interpreted as an interstellar effect (DM). Thus we interpret this intrinsic effect as an additional component δDM to the interstellar DM, and investigate how it can be statistically attributed to intrinsic profile evolution, as well as profile scattering. We make use of Monte-Carlo simulations of beam models to simulate realistic pulsar beams of various geometry, from which we generate intrinsic profiles at various frequency bands. The results show that the excess DM due to intrinsic profile evolution is more pronounced at high frequencies, whereas scattering dominates the excess DM at low frequency. The implications of these results are presented with relation to broadband pulsar timing.
- Full Text:
- Date Issued: 2019
TiRiFiG, a graphical 3D kinematic modelling tool
- Authors: Twum, Samuel Nyarko
- Date: 2019
- Subjects: Tilted Ring Fitting GUI , Astronomy -- Observations , Galaxies -- Observations , Galaxies -- Measurement , Galaxies -- Measurement -- Data processing , Kinematics
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/76409 , vital:30558
- Description: Galaxy kinematics is of crucial importance to understanding the structure, formation and evolution of galaxies. The studies of mass distributions giving rise to the missing mass problem, first raised by Zwicky (1933), give us an insight into dark matter distributions which are tightly linked to cosmology. Neutral hydrogen (H i) has been widely used as a tracer in the kinematic studies of galaxies. The Square Kilometre Array (SKA) and its precursors will produce large Hi datasets which will require kinematic modelling tools to extract kinematic parameters such as rotation curves. TiRiFiC (Józsa et al., 2007) is an example of such a tool for 3D kinematic modelling of resolved spectroscopic observations of rotating disks in terms of the tilted-ring model with varying complexities. TiRiFiC can be used to model a large number (20+) of parameters which are set in a configuration file (.def) for its execution. However, manually editing these parameters in a text editor is uncomfortable. In this work, we present TiRiFiG, Tilted Ring Fitting GUI, which is the graphical user interface that provides an easy way for parameter inputs to be modified in an interactive manner.
- Full Text:
- Date Issued: 2019
Automation of source-artefact classification
- Authors: Sebokolodi, Makhuduga Lerato Lydia
- Date: 2017
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/4920 , vital:20743
- Description: The high sensitivities of modern radio telescopes will enable the detection of very faint astrophysical sources in the distant Universe. However, these high sensitivities also imply that calibration artefacts, which were below the noise for less sensitive instruments, will emerge above the noise and may limit the dynamic range capabilities of these instruments. Detecting faint emission will require detection thresholds close to the noise and this may cause some of the artefacts to be incorrectly detected as real emission. The current approach is to manually remove the artefacts, or set high detection thresholds in order to avoid them. The former will not be possible given the large quantities of data that these instruments will produce, and the latter results in very shallow and incomplete catalogues. This work uses the negative detection method developed by Serra et al. (2012) to distinguish artefacts from astrophysical emission in radio images. We also present a technique that automates the identification of sources subject to severe direction-dependent (DD) effects and thus allows them to be flagged for DD calibration. The negative detection approach is shown to provide high reliability and high completeness catalogues for simulated data, as well as a JVLA observation of the 3C147 field (Mitra et al., 2015). We also show that our technique correctly identifies sources that require DD calibration for datasets from the KAT-7, LOFAR, JVLA and GMRT instruments.
- Full Text:
- Date Issued: 2017
Calibration and imaging with variable radio sources
- Authors: Mbou Sob, Ulrich Armel
- Date: 2017
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/37977 , vital:24721
- Description: Calibration of radio interferometric data is one of the most important steps that are required to produce high dynamic range radio maps with high fidelity. However, naive calibration (inaccurate knowledge of the sky and instruments) leads to the formation of calibration artefacts: the generation of spurious sources and the deformations in the structure of extended sources. A particular class of calibration artefacts, called ghost sources, which results from calibration with incomplete sky models has been extensively studied by Grobler et al. (2014, 2016) and Wijnholds et al. (2016). They developed a framework which can be used to predict the fluxes and positions of ghost sources. This work uses the approach initiated by these authors to study the calibration artefacts and ghost sources that are produced when variable sources are not considered in sky models during calibration. This work investigates both long-term and short-term variability and uses the root mean square (rms) and power spectrum as metrics to evaluate the “quality” of the residual visibilities obtained through calibration. We show that the overestimation and underestimation of source flux density during calibration produces similar but symmetrically opposite results. We show that calibration artefacts from sky model errors are not normally distributed. This prevents them from being removed by employing advanced techniques, such as stacking. The power spectrums measured from the residuals with a variable source was significantly higher than those from residuals without a variable source. This implies advanced calibration techniques and sky model completeness will be required for studies such as probing the Epoch of Reoinization, where we seek to detect faint signals below thermal noise.
- Full Text:
- Date Issued: 2017
Ionospheric disturbances during magnetic storms at SANAE
- Authors: Hiyadutuje, Alicreance
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54956 , vital:26639
- Description: The coronal mass ejections (CMEs) and solar flares associated with extreme solar activity may strike the Earth's magnetosphere and give rise to geomagnetic storms. During geomagnetic storms, the polar plasma dynamics may influence the middle and low-latitude ionosphere via travelling ionospheric disturbances (TIDs). These are wave-like electron density disturbances caused by atmospheric gravity waves propagating in the ionosphere. TIDs focus and defocus SuperDARN signals producing a characteristic pattern of ground backscattered power (Samson et al., 1989). Geomagnetic storms may cause a decrease of total electron content (TEC), i.e. a negative storm effect, or/and an increase of TEC, i.e. a positive storm effect. The aim of this project was to investigate the ionospheric response to strong storms (Dst < -100 nT) between 2011 and 2015, using TEC and scintillation measurements derived from GPS receivers as well as SuperDARN power, Doppler velocity and convection maps. In this study the ionosphere's response to geomagnetic storms is determined by the magnitude and time of occurrence of the geomagnetic storm. The ionospheric TEC results of this study show that most of the storm effects observed were a combination of both negative and positive per storm per station (77.8%), and only 8.9% and 13.3% of effects on TEC were negative and positive respectively. The highest number of storm effects occurred in autumn (36.4%), while 31.6%, 28.4% and 3.6% occurred in winter, spring and summer respectively. During the storms studied, 71.4% had phase scintillation in the range of 0.7 - 1 radians, and only 14.3% of the storms had amplitude scintillations near 0.4. The storms studied at SANAE station generated TIDs with periods of less than an hour and amplitudes in the range 0.2 - 5 TECU. These TIDs were found to originate from the high-velocity plasma flows, some of which are visible in SuperDARN convection maps. Early studies concluded that likely sources of these disturbances correspond to ionospheric current surges (Bristow et al., 1994) in the dayside auroral zone (Huang et al., 1998).
- Full Text:
- Date Issued: 2017
MEQSILHOUETTE: a mm-VLBI observation and signal corruption simulator
- Authors: Blecher, Tariq
- Date: 2017
- Subjects: Large astronomical telescopes , Very long baseline interferometry , MEQSILHOUETTE (Software) , Event horizon telescope
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/40713 , vital:25019
- Description: The Event Horizon Telescope (EHT) aims to resolve the innermost emission of nearby supermassive black holes, Sgr A* and M87, on event horizon scales. This emission is predicted to be gravitationally lensed by the black hole which should produce a shadow (or silhouette) feature, a precise measurement of which is a test of gravity in the strong-field regime. This emission is also an ideal probe of the innermost accretion and jet-launch physics, offering the new insights into this data-limited observing regime. The EHT will use the technique of Very Long Baseline Interferometry (VLBI) at (sub)millimetre wavelengths, which has a diffraction limited angular resolution of order ~ 10 µ-arcsec. However, this technique suffers from unique challenges, including scattering and attenuation in the troposphere and interstellar medium; variable source structure; as well as antenna pointing errors comparable to the size of the primary beam. In this thesis, we present the meqsilhouette software package which is focused towards simulating realistic EHT data. It has the capability to simulate a time-variable source, and includes realistic descriptions of the effects of the troposphere, the interstellar medium as well as primary beams and associated antenna pointing errors. We have demonstrated through several examples simulations that these effects can limit the ability to measure the key science parameters. This simulator can be used to research calibration, parameter estimation and imaging strategies, as well as gain insight into possible systematic uncertainties.
- Full Text:
- Date Issued: 2017