Aspects of the bioavailability of topical corticosteroid formulations
- Authors: Magnus, Ashley Denis
- Date: 2013-02-12
- Subjects: Adrenocortical hormones -- Therapeutic use , Dermatologic agents , Transdermal medication -- Evaluation , Dermatopharmacology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3843 , http://hdl.handle.net/10962/d1009516 , Adrenocortical hormones -- Therapeutic use , Dermatologic agents , Transdermal medication -- Evaluation , Dermatopharmacology
- Description: Two possible variables of the McKenzie/Stoughton blanching assay, namely amount applied to the test site and occlusion time have been investigated. Subsequently, two topical steroid preparations, Synalar cream (0,025% fluocinolone acetonide) and Betnovate cream (0,1% betamethasone 17-valer ate) were extemporaneously diluted with five and six placebo bases respectively. Taking cognizance of the two possible variables, these diluted preparations were assessed in vivo using a modified version of the McKenzie/Stoughton blanching assay for blanching activity over a 14 month period. It was found that the base E45, which is slightly alkali, had the greatest effect on both preparations. In the case of betamethasone 17-valerate this base c aused the conversion to the less active isomer, betamethasone 21-valerate whereas at the end of the 14 month test period it was found that the Synalar/E45 dilution contained no fluocinolone acetonide. Quantitative analysis of all the diluted preparations by high performance liquid chromatography using a reverse-phase system was performed. The data obtained f r om the systematic stUdies of the effects of varying concentrations and occlusion times were presented at the Eleventh National Congress of the South African Pharmacological Society. , KMBT_363 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
Development, manufacture and assessment of Clobetasol 17-propionate cream formulations
- Authors: Fauzee, Ayeshah Fateemah Beebee
- Date: 2011
- Subjects: Adrenocortical hormones , Adrenocortical hormones -- Physiological effect , Adrenocortical hormones -- Testing , Drugs -- Testing , Drugs -- Development , Dermatopharmacology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3856 , http://hdl.handle.net/10962/d1013324
- Description: Eczema or dermatitis is the most common dermatological condition accounting for one-third of all diagnoses in the total population surveyed in South Africa. The prevalence of seborrhoeic dermatitis, extreme photodermatitis and severe psoriasis has increased markedly over the last decade and this increase may be ascribed to the HIV epidemic, first diagnosed in South Africa in 1982. Potent innovator corticosteroids, such as clobetasol 17-propionate (CP) that are used to treat skin disorders, are expensive and there is therefore a need for the production of generic topical corticosteroid products. Formulation and manufacturing processes can be challenging aspects for formulation scientists to produce a robust product that will elicit an appropriate and desirable pharmacokinetic-pharmacodynamic profile. Laboratory scale CP creams were manufactured using different concentrations of Gelot® 64 and propylene glycol in order to establish a composition that would produce a formulation, with similar physical and chemical characteristics and in vitro release profile as an innovator product, Dermovate®. These formulations were assessed in terms of their viscosity, spreadability, pH, content uniformity and in vitro release characteristics using a Franz diffusion cell apparatus. A formulation containing 3% w/w Gelot® 64 and 46% v/v propylene glycol (CPLS-02) was found to exhibit similar viscosity and spreadability characteristics and released CP in a manner similar to Dermovate®. The mechanism of drug release was evaluated using mathematical models such as zero order, first order and Higuchi models. In addition, the in vitro release profiles were characterised by use of difference (f1) and similarity (f2 and Sd) factors. A scale-up formulation with the same % w/w composition as the laboratory scale was also investigated following manufacture using a Wintech® cream/ointment mixer. A Central Composite Design approach was used to investigate the effect of process variables on the performance of the scale-up cream formulations. The homogenisation speed, anchor speed, homogenisation time and cooling time were the process variables investigated. Thirty scale-up batches were manufactured and analysed in terms of their viscosity, spreadability, pH, % drug content and cumulative % drug released per unit area over 72 hours. Model fitting using Design-Expert® software was undertaken and revealed that a correlation between the process variables and the cream responses was most suitably described by quadratic polynomial relationships. The homogenisation speed had the most significant effect on the quality of the scale-up formulations, whereas the anchor speed had a secondary effect on the measured responses, for the formulations investigated. The qualitative interpretation and statistical analysis of the in vitro release data from the scale-up formulations using ANOVA and the f1, f2 and Sd factors revealed that one scale-up batch (CPSU-04), for which the process variables were a homogenisation speed of 1900 rpm, an anchor speed of 35 rpm, a homogenisation time of 100 minutes and a cooling time of 100 minutes, released CP at a similar rate and extent to Dermovate®. A diffusion-controlled mechanism appeared to be predominant in these formulations. A human skin blanching study, using both visual and chromameter assessments, was performed to establish whether batch CPSU-04 was bioequivalent to Dermovate®. The bioequivalence of the selected scale-up formulation to Dermovate® was confirmed, following the calculation of a 90% CI.
- Full Text:
- Date Issued: 2011
Investigations of the assessment of bioequivalence of topical clotrimazole products using a dermatopharmacokinetic approach
- Authors: Parfitt, Natalie Rae
- Date: 2011 , 2010-07-05
- Subjects: Dermatopharmacology , Drugs -- Therapeutic equivalency , Antifungal agents , Therapeutics, Cutaneous and external
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3840 , http://hdl.handle.net/10962/d1007659 , Dermatopharmacology , Drugs -- Therapeutic equivalency , Antifungal agents , Therapeutics, Cutaneous and external
- Description: The specialised nature of the stratum corneum makes it an efficient barrier to foreign substances, including drug molecules. Therefore, cutaneous drug absorption is a slow and complex process of which stratum corneum penetration is the rate limiting step. The rate and extent of stratum corneum penetration by a drug compound depends greatly on the presence of penetration enhancing/retarding excipients and therefore the clinical outcomes of a product rely greatly on the components and quality of the formulation. Hence, establishing bioequivalence between topical products is crucial to ensure that patients receiving multisource drug products are assured of the same efficacy and safety as the brand product. Since locally acting topical formulations do not target the systemic circulation, conventional methods of assessing bioequivalence using plasma levels are not appropriate. Consequently, the current regulatory guidelines require comparative clinical trials to be carried out to show bioequivalence between topical products. As these studies are very expensive and time consuming, the development of a more direct and relatively rapid and inexpensive method for determining bioequivalence between topical products is required. Clotrimazole is an anti-fungal agent where the target site of action is in the stratum corneum. In this work, tape stripping, which involves the sampling of stratum corneum, was investigated as a tool for the determination of bioequivalence between topical clotrimazole products. The tape stripping method involved the analysis of each tape strip individually and standardization of stratum corneum thickness between subjects was carried out using TEWL measurements. This approach provided detailed information regarding the amount of clotrimazole present in the stratum corneum as well as the extent of drug penetration. Prior to the tape stripping studies an HPLC method was developed for the quantitative analysis of clotrimazole from the tape strip samples. This method was shown to be accurate and reproducible across the required range. It was also shown to be selective for clotrimazole in the presence of possible interfering substances such as those present in the tape adhesive and also skin components. The bioequivalence studies were conducted using a single “uptake” time point. In order to determine an appropriate dose duration for these studies a novel approach was employed, involving a preliminary dose duration study. For the bioequivalence investigations, Canesten® Topical cream was used as both test and reference products to determine if the method was capable of showing bioequivalence. Subsequently, Canesten® Topical cream was also compared to a 1% gel formulation to determine if the method could detect formulation differences. The conventional BE limits of 0.8 – 1.25 were used for the assessment of BE, however, the clinical relevance of using these limits for dermal studies is debatable since they are derived from oral pharmacokinetic studies. Therefore, the data from the tape stripping investigations were also assessed using more realistic limits of 0.75 – 1.33 and even 0.7 – 1.44. In addition to the tape stripping studies a novel method of determining the amount of drug present in the stratum corneum, the “Residual Method”, was investigated. This method involved assaying the amount of clotrimazole found in the residual formulation after a specified dose duration had elapsed and subtracting that amount from the amount of clotrimazole initially applied. The results of tape stripping investigations showed that, if the study is sufficiently powered, tape stripping may be used to determine bioequivalence according to the conventional limits, as well as possibly detect formulation differences between different clotrimazole products. Bioequivalence assessment using the widened intervals showed that fewer subjects were required to achieve a sufficient statistical power. The variability associated with this method was acceptable and tape stripping may therefore have the potential to be used as a BE tool in a regulatory setting for clotrimazole or other antifungal topical formulations. The “Residual Method” also showed promising results as a bioequivalence tool, but further investigation and extensive validation of this method is required before it can be suggested as a regulatory method. The results of these studies have clearly indicated that tape stripping has the potential to be used as an alternative to comparative clinical trails for the assessment of bioequivalence between clotrimazole formulations and also to assess bioequivalence between other antifungal products.
- Full Text:
- Date Issued: 2011
Development and in vitro evaluation of a clobetasol 17-propionate topical cream formulation
- Authors: Wa Kasongo, Kasongo
- Date: 2007
- Subjects: Adrenocortical hormones , Adrenocortical hormones -- Physiological effect , Drugs -- Testing , Drug development , Dermatopharmacology
- Language: English
- Type: Thesis , Masters , MPharm
- Identifier: vital:3799 , http://hdl.handle.net/10962/d1003277 , Adrenocortical hormones , Adrenocortical hormones -- Physiological effect , Drugs -- Testing , Drug development , Dermatopharmacology
- Description: One of the primary contributing factors to the escalating costs of health care is the high cost of innovator pharmaceutical products. As a consequence, health authorities in various countries and in particular in the developing world have identified generic prescribing and generic substitution as possible strategies to contain the escalating costs of health care provision. There is therefore a need for formulation scientists in developing countries to invest more time in the research and development of generic formulations. Clobetasol 17-propionate (CP) generic cream formulations containing 0.05% w/w of the drug were manufactured and characterized using in vitro testing. Formulation development studies were preceded by the development and validation of an RP-HPLC with UV detection for the quantitation and characterization of CP in innovator and generic cream formulations during formulation development and assessment studies. Furthermore the in vitro release ates of CP release from innovator and generic cream formulations were monitored using a validated in vitro release test method developed in these studies. The formulation of CP cream products was accomplished using a variety of commercially available mixed primary emulsifiers, such as Estol® 1474, Ritapro® 200, Emulcire® 61 WL and Gelot® 64. Successful formulations were selected based on their ability to remain physically stable immediately after manufacture and for 24 hours after storage at room temperature (22°C). Estol® 1474 was found to produce an unstable cream and was therefore not investigated further. The other three emulgents produced stable creams, but only the in vitro release profile of CP from a cream manufactured to contain Gelot® 64 was found to be statistically similar to that of the innovator formulation. Therefore the cream containing Gelot® 64 was selected as the most appropriate prototype generic cream formulation and was characterized in vitro in terms of CP content, viscosity, pH and in vitro release rate. Data generated from these studies were compared to those of the innovator product, Dermovate® cream, using statistical methods. The CP content, pH and in vitro release rate data of the CP formulation were similar to those of the innovator product, however the intrinsic viscosity of Dermovate® cream was almost three (3) times greater than the intrinsic viscosity of the test formulation developed using Gelot® 64. The CP cream formulation developed in these studies was stored for 4 weeks at 40 ± 2°C and 25 ± 5% RH in an incubator and the formulation was found to be stable. A formulation has been developed and assessed and found to be suitable for use as a topical semi-solid dosage form for CP.
- Full Text:
- Date Issued: 2007
Evaluation of the safety and efficacy of topical mometasone furoate formulations
- Authors: Chamboko, Bernadett Vongayi
- Date: 2007
- Subjects: Adrenocortical hormones -- Physiological effect , Drugs -- Testing , Dermatopharmacology , High performance liquid chromatography
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3748 , http://hdl.handle.net/10962/d1003226 , Adrenocortical hormones -- Physiological effect , Drugs -- Testing , Dermatopharmacology , High performance liquid chromatography
- Description: The human skin blanching assay (HSBA) is a well-researched and validated method for the bioequivalence assessment of topical corticosteroids. Traditionally, visual assessment of skin blanching has been used. Such testing methods are not conducive for interlaboratory comparisons. Regulatory bodies prefer less subjective methods of analysis. The FDA released guidelines on the assessment of bioequivalence for topical corticosteroids that recommends the use of a chromameter as a reliable method to measure skin blanching although the use of visual assessment with acceptable validation is also provided for. However, the FDA does not elucidate on the manipulation and handling of the chromameter during skin blanching measurements. The purpose of this project was several fold, which included investigations to standardize the manipulation and handling of a chromameter. In particular, measures to avoid skin whitening resulting from the effects of pressure on the skin during chromameter use were investigated. Other methods of analysis should surpass or at least be comparable to the HSBA if such methods are to be used for the assessment of topical corticosteroids. Microdialysis is a relatively new technique for assessing the rate at which drug penetrates the skin. The advantage of using this method is that there are fewer restrictions for selection of an appropriate study population unlike those required for the HSBA where one has to be both a ‘responder’ and a ‘detector’ for their results to be used in data analysis. Microdialysis was investigated by initially conducting experiments in which microdialysis probes were embedded into topical formulations containing mometasone furoate (MF) and the initial results revealed that relatively low drug was released from the formulations. These results indicated that should microdialysis be applied to measure the in vivo release of MF from such topical formulations following application to the skin, even lower concentrations of MF would likely result in the dialysate, necessitating the need for ultra-high sensitive methods of analysis. Typically, the availability of an appropriate analytical technique such as liquid chromatography coupled with mass spectrometry (LCMS) would be a pre-requisite for such in vivo studies. However, only high-pressure liquid chromatography (HPLC) and other less sensitive equipment was available in the laboratories. The study objectives were therefore focussed on in vitro assessment of the release of MF from topical formulations using microdialysis and Franz cells. In addition, the in vivo release of MF was also studied using the HSBA. Data obtained from the microdialysis experiments were compared with the data obtained from the Franz cell diffusion studies in order to provide information on the pharmaceutical availability of MF from the various topical MF dosage forms. Subsequently, pharmaceutical equivalence was investigated from the comparative pharmaceutical availability data using statistical analysis. An additional objective was to attempt to correlate in vitro with in vivo data (IVIVC) to establish a model that could be used to assess safety and efficacy of generic topical drug products. The in vivo data obtained from the HSBA were processed according to the FDA requirements and these pharmacodynamic data were subsequently compared with the microdialysis and Franz cell results. In summary the objectives of this project were: 1. To develop a system to improve the reproducibility of the use of a Minolta® chromameter and compare this with the standard/normal manipulation and handling of such instruments. 2. To develop and validate an HPLC method for the analysis of MF for use with in vitro diffusion studies using microdialysis and Franz cells. 3. To conduct a comparative HSBA on proprietary MF topical creams from two different countries in accordance with the FDA guidance. 4. To assess the pharmaceutical equivalence of topical formulations containing MF using Franz diffusion cells and in vitro microdialysis. 5. To compare the in vivo data obtained from the HSBA with those obtained in vitro using microdialysis and Franz cells.
- Full Text:
- Date Issued: 2007
Tropical corticosteroid bioequivalence testing comparison of chromameter and visual data
- Authors: Demana, Patrick Hulisani
- Date: 1998
- Subjects: Dermatopharmacology , Dermatologic agents , Skin absorption
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3755 , http://hdl.handle.net/10962/d1003233 , Dermatopharmacology , Dermatologic agents , Skin absorption
- Description: The major criticism of the human skin blanching assay is the subjective nature of grading the response. Recently the American FDA released a Guidance document for topical corticosteroid bioequi valence testing. The guidelines require the use of a chromameter as a reliable method to estimate skin blanching. The purpose of this study was to evaluate the recommendations of this document for appropriateness by comparing visual and chromameter data. The visually-assessed blanching assay methodology routinely practised in our laboratories was modified to comply with the specifications of the Guidance. The preliminary trial indicated that the training period that is required for a novice to be classified as an experienced observer is not a major problem. The major trend that emerged from the pilot study was that visual assessment was better than the chromameter. Longer dose durations were found to be more discriminatory than shorter durations. The visual data were best described by the sigmoid Emax model and the chromameter data were best described by the simple Emax model. The pivotal results indicated that the D2/Dj criterion to determine sample size of "acceptable blanchers" produced only few subjects suggesting that the validity of this criterion requires extensive investigations. The estimates of the Locke's confidence interval method were simiJar to those for the general simple formula. However, due to undefined parameters of the Locke's method in the Guidance, the validity of the Locke's method requires evaluation. The chromameter b-scale parameter was the least sensitive in estimating skin blanching whereas the a- and L-scale parameters produced similar results. Poor correlation between visual and chromameter was noted indicating that the visual method is still the best method.
- Full Text:
- Date Issued: 1998
Aspects of the bioavailability of topical corticosteroid formulations
- Authors: Magnus, Ashley Denis
- Date: 1979
- Subjects: Adrenocortical hormones , Dermatopharmacology , Dermatologic agents , Transdermal medication
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3724 , http://hdl.handle.net/10962/d1001458
- Description: Two possible variables of the McKenzie/Stoughton blanching assay, namely amount applied to the test site and occlusion time have been investigated. Subsequently, two topical steroid preparations, Synalar cream (0,025% fluocinolone acetonide) and Betnovate cream (0,1% betamethasone 17- valerate) were extemporaneously diluted with five and six placebo bases respectively. Taking cognizance of the two possible variables, these diluted preparations were assessed in vivo using a modified version of the McKenzie/Stoughton blanching assay for blanching activity over a 14 month period. It was found that the base E45, which is slightly alkali, had the greatest effect on both preparations. In the case of betamethasone 17-valerate this base caused the conversion to the less active isomer, betamethasone 21-valerate whereas at the end of the 14 month test period it was found that the Synalar/E45 dilution contained no fluocinolone acetonide. Quantitative analysis of all the diluted preparations by high performance liquid chromatography using a reverse-phase system was performed. The data obtained from the systematic studies of the effects of varying concentrations and occlusion times were presented at the Eleventh National Congress of the South African Pharmacological Society
- Full Text:
- Date Issued: 1979
The in vivo and quantitative assessment of topical corticosteroid formulations
- Authors: Coleman, Gerald Leslie
- Date: 1978 , 2013-10-14
- Subjects: Dermatopharmacology , Dermatologic agents , Skin absorption , Adrenocortical hormones -- Therapeutic use , Transdermal medication -- Evaluation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3857 , http://hdl.handle.net/10962/d1013337
- Full Text:
- Date Issued: 1978