Graphene derivatives and electrocatalysts as composite electrodes for selective detection of catecholamine neurotransmitters
- Authors: Luhana, Charles Benjamin
- Date: 2024-04-05
- Subjects: Graphene , Catecholamines , Neurotransmitters , Electrodes , Electrocatalysis , Electrocatalyst
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/435907 , vital:73211 , DOI 10.21504/10962/435907
- Description: In this thesis, we investigated the development of electrochemical sensing electrodes based on graphene derivatives and the electrocatalyst composites of metallophthalocyanines and metal oxides towards the selective and sensitive detection of catecholamine neurotransmitters (NTs). The graphene and its derivatives offer excellent electron conductivity and hence their use as base electrode materials. Metallophthalocyanines are N4-macrocyclic metal organic complexes that have structural modification flexible and 18-π electrons with excellent electrocatalytic properties. They can incorporate transition metal ions at the centre of the macrocycle ring, and this further enhances their electrocatalytic activity. Transition metal oxides are of interest as these also offer excellent redox properties and pH sensitivity. A pH sensitive electrochemical sensor based on aminated graphene quantum dots (AmGQDs) and cobalt tetra carboxyphenoxy phthalocyanine (CoTCPhOPc) covalent conjugates onto the pre-grafted isophthalic acid (IPA) gold electrode was fabricated. It displayed excellent analytical performance towards the detection of dopamine (DA), norepinephrine (NOR) and epinephrine (EP). The electrochemical sensor exhibited good ability to suppress the background current due to ascorbic acid (AA), a major interference in the detection catecholamine NTs. The carboxylic acid functional group of cobalt phthalocyanine induced the pH sensitivity of the thin film and electrostatic repulsion of the negatively charged ascorbate (AA-) anion at physiological pH. In addition, the electrode could screen-off biological molecules in the newborn calf serum as a representative of a real sample. An electrochemically reduced graphene oxide–based cobalt phthalocyanine polymer (polyCoTAPc) composite electrochemical sensor was fabricated on glassy carbon electrode, GCE-ERGO/polyCoTAPc. The GCE-ERGO/polyCoTAPc could detect dopamine and paracetamol simultaneously as co-existing analytes in buffer and synthetic urine samples. We observed, (i) very strong absorption of the materials, (ii) increase in the electrode surface area, (iii) excellent conductivity, and (iv) electrocatalytic activity of the ERGO/polyCoTAPc composite surface. Furthermore, a simple ultrasensitive electrochemical sensor based on nickel hydroxide thin film electrodeposited onto reduced graphene oxide-molybdenum disulfide (RGO/MoS2) composite resulted in the electrochemical sensor that can selectively and simultaneously detect ascorbic acid, dopamine, and uric acid. A distinct peak potential separation was observed with excellent electrocatalytic oxidation currents. The electrochemical sensors developed in this work exhibited high sensitivity, selectivity, stability, and low detection limits suitable for the detection and determination of catecholamine NTs. , Thesis (PhD) -- Faculty of Science, Chemistry, 2024
- Full Text:
- Date Issued: 2024-04-05
- Authors: Luhana, Charles Benjamin
- Date: 2024-04-05
- Subjects: Graphene , Catecholamines , Neurotransmitters , Electrodes , Electrocatalysis , Electrocatalyst
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/435907 , vital:73211 , DOI 10.21504/10962/435907
- Description: In this thesis, we investigated the development of electrochemical sensing electrodes based on graphene derivatives and the electrocatalyst composites of metallophthalocyanines and metal oxides towards the selective and sensitive detection of catecholamine neurotransmitters (NTs). The graphene and its derivatives offer excellent electron conductivity and hence their use as base electrode materials. Metallophthalocyanines are N4-macrocyclic metal organic complexes that have structural modification flexible and 18-π electrons with excellent electrocatalytic properties. They can incorporate transition metal ions at the centre of the macrocycle ring, and this further enhances their electrocatalytic activity. Transition metal oxides are of interest as these also offer excellent redox properties and pH sensitivity. A pH sensitive electrochemical sensor based on aminated graphene quantum dots (AmGQDs) and cobalt tetra carboxyphenoxy phthalocyanine (CoTCPhOPc) covalent conjugates onto the pre-grafted isophthalic acid (IPA) gold electrode was fabricated. It displayed excellent analytical performance towards the detection of dopamine (DA), norepinephrine (NOR) and epinephrine (EP). The electrochemical sensor exhibited good ability to suppress the background current due to ascorbic acid (AA), a major interference in the detection catecholamine NTs. The carboxylic acid functional group of cobalt phthalocyanine induced the pH sensitivity of the thin film and electrostatic repulsion of the negatively charged ascorbate (AA-) anion at physiological pH. In addition, the electrode could screen-off biological molecules in the newborn calf serum as a representative of a real sample. An electrochemically reduced graphene oxide–based cobalt phthalocyanine polymer (polyCoTAPc) composite electrochemical sensor was fabricated on glassy carbon electrode, GCE-ERGO/polyCoTAPc. The GCE-ERGO/polyCoTAPc could detect dopamine and paracetamol simultaneously as co-existing analytes in buffer and synthetic urine samples. We observed, (i) very strong absorption of the materials, (ii) increase in the electrode surface area, (iii) excellent conductivity, and (iv) electrocatalytic activity of the ERGO/polyCoTAPc composite surface. Furthermore, a simple ultrasensitive electrochemical sensor based on nickel hydroxide thin film electrodeposited onto reduced graphene oxide-molybdenum disulfide (RGO/MoS2) composite resulted in the electrochemical sensor that can selectively and simultaneously detect ascorbic acid, dopamine, and uric acid. A distinct peak potential separation was observed with excellent electrocatalytic oxidation currents. The electrochemical sensors developed in this work exhibited high sensitivity, selectivity, stability, and low detection limits suitable for the detection and determination of catecholamine NTs. , Thesis (PhD) -- Faculty of Science, Chemistry, 2024
- Full Text:
- Date Issued: 2024-04-05
The electrocatalytic response of metallophthalocyanines when clicked to electrodes and to nanomaterials
- Authors: Mpeta, Lekhetho Simon
- Date: 2021
- Subjects: Phthalocyanines , Nanostructured materials , Electrocatalysis , Nanoparticles , Environmental chemistry , Electrodes , Organic wastes -- Purification
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/172191 , vital:42174 , 10.21504/10962/172191
- Description: Conjugates of nanomaterials and metallophthalocyanines (MPcs) have been prepared and their electrocatalytic activity studied. The prepared nanomaterials are zinc oxide and silver nanoparticles, reduced graphene oxide nanosheets and semiconductor quantum dots. The MPcs used in this work are cobalt (II) (1a), manganese(III) (1b) and iron (II) (1c) 2,9(10),16(17),23(24)- tetrakis 4-((4-ethynylbenzyl) oxy) phthalocyaninato, 2,9(10),16(17),23(24)- tetrakis(5-pentyn-oxy) cobalt (II) phthalocyaninato (2), 9(10),16(17),23(24)- tris-[4-tert-butylphenoxy)-2- (4-ethylbezyl-oxy) cobalt (II) phthalocyaninato (3), 9(10),16(17),23(24)- tris-[4-tertbutylphenoxy)-2-(pent-4yn-yloxy)] cobalt (II) phthalocyaninato (4), cobalt (II) (5a) and manganese (III) (5b) 2,9(10),16(17),23(24)- tetrakis [4-(4-(5-chloro-1H-benzo [d]imidazol-2-yl)phenoxy] phthalocyaninato and 9(10),16(17),23(24)- tris tert butyl phenoxy- 2- [4-(4-(5-chloro-1H-benzo[d]imidazole-2-yl)phenoxy] cobalt (II) phthalocyaninato (6). Some of these MPcs (1a, 3 and 4) were directly clicked on azide grafted electrode, while some (1b, 1c, 2, 5a and 5b) were clicked to azide functionalised nanomaterials and then drop-dried on the electrodes. One phthalocyanine (5b) was drop-dried on the electrode then silver nanoparticles were electrodeposited on it taking advantage of metal-N bond. Scanning electrochemical microscopy, voltammetry, chronoamperometry, electrochemical impedance spectroscopy are among electrochemical methods used to characterise modified electrodes. Transmission electron microscopy, X-ray photoelectron spectroscopy, Xray diffractometry, Raman spectroscopy and infrared spectroscopy were employed to study surface functionalities, morphology and topography of the nanomaterials and complexes. Electrocatalytic activity of the developed materials were studied towards oxidation of 2-mercaptoethanol, hydrazine and hydrogen peroxide while the reduction study was based on oxygen and hydrogen peroxide. In general, the conjugates displayed superior catalytic activity when compared to individual materials. Complex 2 alone and when conjugated to zinc oxide nanoparticles were studied for their nonlinear optical behaviour. And the same materials were explored for their hydrazine detection capability. The aim of this study was to develop sensitive, selective and affordable sensors for selected organic waste pollutants. Conjugates were found to achieve the aim of the study compared to when individual materials were employed.
- Full Text:
- Date Issued: 2021
- Authors: Mpeta, Lekhetho Simon
- Date: 2021
- Subjects: Phthalocyanines , Nanostructured materials , Electrocatalysis , Nanoparticles , Environmental chemistry , Electrodes , Organic wastes -- Purification
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/172191 , vital:42174 , 10.21504/10962/172191
- Description: Conjugates of nanomaterials and metallophthalocyanines (MPcs) have been prepared and their electrocatalytic activity studied. The prepared nanomaterials are zinc oxide and silver nanoparticles, reduced graphene oxide nanosheets and semiconductor quantum dots. The MPcs used in this work are cobalt (II) (1a), manganese(III) (1b) and iron (II) (1c) 2,9(10),16(17),23(24)- tetrakis 4-((4-ethynylbenzyl) oxy) phthalocyaninato, 2,9(10),16(17),23(24)- tetrakis(5-pentyn-oxy) cobalt (II) phthalocyaninato (2), 9(10),16(17),23(24)- tris-[4-tert-butylphenoxy)-2- (4-ethylbezyl-oxy) cobalt (II) phthalocyaninato (3), 9(10),16(17),23(24)- tris-[4-tertbutylphenoxy)-2-(pent-4yn-yloxy)] cobalt (II) phthalocyaninato (4), cobalt (II) (5a) and manganese (III) (5b) 2,9(10),16(17),23(24)- tetrakis [4-(4-(5-chloro-1H-benzo [d]imidazol-2-yl)phenoxy] phthalocyaninato and 9(10),16(17),23(24)- tris tert butyl phenoxy- 2- [4-(4-(5-chloro-1H-benzo[d]imidazole-2-yl)phenoxy] cobalt (II) phthalocyaninato (6). Some of these MPcs (1a, 3 and 4) were directly clicked on azide grafted electrode, while some (1b, 1c, 2, 5a and 5b) were clicked to azide functionalised nanomaterials and then drop-dried on the electrodes. One phthalocyanine (5b) was drop-dried on the electrode then silver nanoparticles were electrodeposited on it taking advantage of metal-N bond. Scanning electrochemical microscopy, voltammetry, chronoamperometry, electrochemical impedance spectroscopy are among electrochemical methods used to characterise modified electrodes. Transmission electron microscopy, X-ray photoelectron spectroscopy, Xray diffractometry, Raman spectroscopy and infrared spectroscopy were employed to study surface functionalities, morphology and topography of the nanomaterials and complexes. Electrocatalytic activity of the developed materials were studied towards oxidation of 2-mercaptoethanol, hydrazine and hydrogen peroxide while the reduction study was based on oxygen and hydrogen peroxide. In general, the conjugates displayed superior catalytic activity when compared to individual materials. Complex 2 alone and when conjugated to zinc oxide nanoparticles were studied for their nonlinear optical behaviour. And the same materials were explored for their hydrazine detection capability. The aim of this study was to develop sensitive, selective and affordable sensors for selected organic waste pollutants. Conjugates were found to achieve the aim of the study compared to when individual materials were employed.
- Full Text:
- Date Issued: 2021
- «
- ‹
- 1
- ›
- »