- Title
- Friction hydro pillar riveting process of Ti-6AI-4V titanium sheet
- Creator
- Tsikayi, Davies Shamiso
- Subject
- Friction welding
- Subject
- Titanium alloys -- Welding
- Subject
- Sheet-metal
- Date Issued
- 2015
- Date
- 2015
- Type
- Thesis
- Type
- Masters
- Type
- MTech
- Identifier
- http://hdl.handle.net/10948/6357
- Identifier
- vital:21078
- Description
- Mechanical fasteners are used extensively in the joining of two or more metal plates or sheets. Riveted joints have been the joints of choice mainly for the Aerospace Industry. However for this research, Friction Hydro Pillar Processing has been used to develop and characterise a new riveting technique termed Friction Hydro Pillar Riveting (FHPR). Two overlapping 3.17 mm Ti-6Al-4V sheets were joined together using Ø6 mm rivet which was friction processed. This research has focussed on the initial development of Friction Hydro Pillar Riveting thereby establishing a basic understanding of the influences of main process parameters, rotational speed and axial force - and also joint configurations. The results showed that with a decrease in the bottom hole chamfer angle, there was resulting overall increase in the rivet joint pull off strength. From the best performing joint configuration in pull off tests, shear tests were conducted whilst a blind hole FHPR joint was also done and tested in pull off and shear strength. The shear test fracture surfaces exhibited ductile failure. The microstructure of the joints was thus evaluated. From parent material, heat affected zone and to weld zone there was a variation in the microstructure analysed. The hardness profiles showed increased hardness in the weld zone which partly explained the shear results. The hardness increase was mainly due to grain refinement in the weld zone by the Friction Hydro Pillar Riveting process.
- Format
- xiii, 115 leaves
- Format
- Publisher
- Nelson Mandela Metropolitan University
- Publisher
- Faculty of Engineering, the Built Environment and Information Technology
- Language
- English
- Rights
- Nelson Mandela Metropolitan University
- Hits: 1583
- Visitors: 1636
- Downloads: 100
Collections
NMMU School of Engineering
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | SOURCE1 | Friction hydro pillar riveting process of Ti-6AI-4V titanium sheet | 7 MB | Adobe Acrobat PDF | View Details Download |