The coordination and extractive chemistry of the later 3d transition metal ions with N, N'-donor imidazole-based ligands
- Authors: Moleko, Pulleng
- Date: 2014
- Subjects: Solvent extraction , Coordination compounds
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/8382 , vital:26352
- Description: The application of bidentate N,N'-donor ligands, such as 2,2'-biimidazole (BIIMH2) and 2,2'-pyridylimidazole (PIMH) and (1H-benzimidazol-2yl)-N-methylmethanamine (BIMAH), in the solvent extraction of base metal ions from an acidic sulfate/sulfonate medium was investigated. PIMH and BIMAH showed selectivity for Ni(II) with the only interfering ion being Cu(II) in the pH range 1.2-1.8 but BIIMH2 lacked selectivity. The extraction patterns observed were influenced by stereochemical aspects, and this agreed well with the envisaged design of nickel(II)-specific extractants through stereochemical “tailor-making” which is proposed in this study. The extraction patterns were explained from a coordination chemistry point of view using spectroscopic analysis and single crystal X-ray analysis to diagnose the geometry of the complexes formed from the interaction of the base metal ions with the ligands. The formation of the trigonal bipyrimidal [Cu(PIM)2(H2O)](SO4) complex, with a water molecule coordinated, while nickel(II) forms a square planar bisPIMH was put forward as the reason for extraction pattern observed with this ligand. Cobalt(II) also forms a bisPIMH complex but has two water molecules coordinated in the formation of a distorted octahedral complex, and this results in less extractable species. A similar observation as for PIMH was noticed in BIMAH complexation reactions. The BIIMH2 complexes were found to be distorted octahedral, through the bis-coordination of BIIMH2 and two sulfonate ions, resulting in lack of pH-metric separation of the later 3d metal ions. The stability constants data was in agreement with what was observed in the solvent extraction and coordination chemistry studies for the three ligand systems.
- Full Text:
- Date Issued: 2014
The study of hydroxyoximes and hydroxamic acids supported on macroporous resins and their use in the rapid seperation of metals
- Authors: Hemmes, Marlene
- Date: 1979
- Subjects: Chromatographic analysis , Separation (Technology) , Metal ions , Solvent extraction , Extraction (Chemistry) , Oximes , Metals -- Analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4453 , http://hdl.handle.net/10962/d1009512
- Description: Introduction: The macroporous Amberlite XAD resins were coated with LIX-64N and examined for the rate of uptake of copper . XAD-7 was by far the best support and gave a satisfactory rate of uptake up to loadings of 60% (w/w). The specific surface area of XAD-7 was measured by the adsorption of methylene blue from aqueous solution. The area of the wetted resin was five times less than that of the dry resin. LIX-65N was purified and the anti isomer characterised using spectroscopic techniques . The rate of uptake of copper was not improved by use of purified LIX-65N or by addition of LIX-63. XAD-7 coated with LIX-65N was used in columns. Elution curves for copper showed negligible tailing, and rapid separations of copper from iron (111), nickel, cobalt and magnesium by selective absorption were achieved. Copper was concentrated from very dilute solution at a flow rate of 50 ml min -1 ,and a 99% recovery was obtained. The method was applied to the rapid determination of copper in brass and bronze. A series of long-chain hydroxamic acids were synthesised and tested for suitability as stationary phase on XAD-7. Oleohydroxamic acid and naphthenohydroxamic acid were the most promising. The r ate of uptake of copper was reduced by the use of nonylphenol or amyl alcohol as a diluent. The capacities for copper of the hydroxamic acids were less when supported on XAD-7 than when used as liquid ionexchangers. The distribution coefficients of cobalt, nickel, zinc, lead, vanadium, uranium, iron (111) and copper were measured as a function of pH. XAD-7 coated with oleohydroxamic acid was used in columns for the rapid separation of iron (111) from copper and of copper from nickel, cobalt, lead and zinc. Copper was concentrated from very dilute solution at a flow rate of 45 ml min -1 and a 100,8% recovery was obtained. Copper was successfully separated from nickel by selective elution. The elution curves obtained show negligible tailing. The resin loaded with oleohydroxamic acid lost capacity due to chemical instability. Naphthenohydroxamic acid supported on XAD-7 was not suitable for use in columns, because it was physically unstable.
- Full Text:
- Date Issued: 1979