Polymer based electrospun nanofibers as diagnostic probes for the detection of toxic metal ions in water
- Authors: Ondigo, Dezzline Adhiambo
- Date: 2013
- Subjects: Heavy metals , Nanofibers , Nanoparticles , Colorimetric analysis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4557 , http://hdl.handle.net/10962/d1018261
- Description: The thesis presents the development of polymer based electrospun nanofibers as diagnostic probes for the selective detection of toxic metal ions in water. Through modification of the chemical characteristics of nanofibers by pre- and post-electrospinning treatments, three different diagnostic probes were successfully developed. These were the fluorescent pyridylazo-2-naphthol-poly(acrylic acid) nanofiber probe, the colorimetric probe based on glutathione-stabilized silver/copper alloy nanoparticles and the colorimetric probe based on 2-(2’-Pyridyl)-imidazole functionalized nanofibers. The probes were characterized by Fourier transform infrared spectroscopy (FTIR), Energy dispersive x-ray spectroscopy (EDX), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The fluorescent nanofiber probe was developed towards the determination of Ni²⁺. Covalently functionalized pyridylazo-2-naphthol-poly(acrylic acid) polymeric nanofibers were employed. The solid state Ni²⁺ probe exhibited a good correlation between the fluorescence intensity and nickel concentration up to 1.0 mg/mL based on the Stern-Volmer mechanism. The detection limit of the nanofiber probe was found to be 0.07 ng/mL. The versatility of the fluorescent probe was demonstrated by affording a simple, rapid and selective detection of Ni²⁺ in the presence of other competing metal ions by direct analysis without employing any sample handling steps. For the second part of the study, a simple strategy based on the in-situ synthesis of the glutathione stabilized silver/copper alloy nanoparticles (Ag/Cu alloy NPs) in nylon 6 provided a fast procedure for fabricating a colorimetric probe for the detection of Ni²⁺ in water samples. The electrospun nanofiber composites responded to Ni²⁺ ions but did not suffer any interference from the other metal ions. The effect of Ni²⁺ concentration on the nanocomposite fibers was considered and the “eye-ball” limit of detection was found to be 5.8 μg/mL. Lastly, the third probe was developed by covalently linking an imidazole derivative; 2-(2′-Pyridyl)-imidazole (PIMH) to Poly(vinylbenzyl chloride) (PVBC) and nylon 6 nanofibers by post-electrospinning treatments using a wet chemical method and graft copolymerization technique, respectively. The post-electrospinning modifications of the nanofibers were achieved without altering their fibrous morphology. The color change to red-orange in the presence of Fe²⁺ for both the grafted nylon 6 (white) and the chemically modified PVBC (yellow) nanofibers was instantaneous. The developed diagnostic probes exhibited the desired selectivity towards the targeted metal ions.
- Full Text:
- Date Issued: 2013
Structural analysis of synthetic ferrihydrite nanoparticles and its reduction in a hydrogen atmosphere
- Authors: Masina, Colani John
- Date: 2013
- Subjects: Ferric hydroxides , Minerals -- Analysis , Nanoparticles
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10555 , http://hdl.handle.net/10948/d1020796
- Description: Ferrihydrite (FHYD), a nanocrystalline material has long been described as a poorly crystalline disordered mineral mainly due to its small crystal size which is typically 2−6 𝑛𝑚. The three-dimensional structure of the mineral has long been described by a multi-phase structural model that consists of Fe3+ only in octahedral (Oh) coordination. In this model ferrihydrite is described as a mixture of two major phases (akaganeite/goethite-like f-phase and feroxyhite-like d-phase) and a minor ultradispersed nanohematite phase. This model has been recently challenged and a new, single-phase model was proposed, having a basic structural motif closely related to the Baker-Figgs δ-Keggin cluster and is isostructural with the mineral akdalaite, Al10O14(OH)2. In its ideal form, the proposed new structure of FHYD consist of 80 % Oh and 20 % tetrahedral (Td) Fe3+ polyhedra which can be adequately described by a single-domain model with the hexagonal spacegroup 𝑃63𝑚𝑐 and unit cell dimensions 𝑎=5.95 Å and 𝑐=9.06 Å. In this study, nanoparticles of 2-line FHYD (FHYD2), 2-line FHYD deposited onto SiO2 (FHYD2/SiO2) and 6-line FHYD (FHYD6) synthesised using rapid hydrolysis of Fe(NO3)3.9H2O solutions were characterized using X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), Mössbauer spectroscopy (MS) as well as magnetization and magnetic susceptibility measurements. The coordination environment of iron atoms in the structure of FHYD was investigated using TEM and MS. The thermal transformation of FHYD nanoparticles was monitored through changes in the magnetization as a function of temperature and the reduction behaviour in hydrogen environment was studied using temperature programmed reduction (TPR), in-situ XRD and MS. Electron diffraction, TEM/ scanning TEM (STEM) imaging, and electron energy loss (EELS) measurements were carried out on three different microscopes viz. JEOL JEM-2100 LaB6 TEM, aberration corrected Schottky-FEG JEOL JEM-ARM200F HRTEM and cold-FEG Zeiss SESAM TEM. EELS studies were concentrated mainly on the iron 𝐿-edge of FHYD and iron oxides reference spectra with well known crystal structures. The iron oxide Fe 𝐿-edge is usually characterized by two intense sharp peaks termed “white lines”. The fine structures introduced by the crystal field effect on the 𝐿- edge contain information that is highly specific to the Fe3+ site symmetry.
- Full Text:
- Date Issued: 2013