The impact of the construction regulations 2014 on a water utility’s projects’ health and safety performance in South Africa
- Authors: Malindi, Rajandree Mandy
- Date: 2018
- Subjects: Construction industry -- Safety regulations -- South Africa , Construction industry -- Standards -- South Africa Construction industry -- Law and legislation -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/31655 , vital:31645
- Description: The construction industry plays a major role in South Africa’s economic development. Since promulgation of the Construction Regulations, the expectation is that project stakeholders are placing more emphasis on H&S to contribute to project success. The study aimed to assess the impact of the involvement of clients and other project stakeholders on the overall project H&S performance on projects undertaken by a large water utility. The scope was limited to the organisation’s engineering and operations division and its internal project stakeholders, namely the designers, quantity surveyors, project managers, and construction H&S professionals. Local literature pointed out that poor construction H&S performance is attributable to a lack of management commitment, inadequate supervision, inadequate or lack of H&S training, lack of worker involvement, personal risk appreciation and work pressures (cidb, 2009: 37). International literature indicated that the total CoA exceeds the cost of H&S (cidb, 2009: 9). Quantitative methods were utilised in two phases to gather and analyse data. In Phase 1, a questionnaire was developed and distributed to a target population, and in Phase 2, data was obtained from existing records of historic and completed project files for projects undertaken by the water utility. A total of 67 responses were used to analyse data. All stakeholders somehow contributed to H&S however, most respondents regarded CHS professionals, contractors and PMs as the primary stakeholders. The study found that stakeholders perceived H&S to be influenced during the later rather than the initial stages of projects and that H&S actions were significantly undertaken during stage 5. The frequency of H&S actions varied with each stakeholder dependent on the stage in which they were involved in. Recommendations were for H&S to be integrated in the initial stages of projects and for a follow up research to be conducted to investigate if there are improvements during the six project stages after full implementation of the Construction Regulations 2014. This requirement will force industry to comply and most importantly to drive joint efforts by the various stakeholders.
- Full Text:
- Date Issued: 2018
- Authors: Malindi, Rajandree Mandy
- Date: 2018
- Subjects: Construction industry -- Safety regulations -- South Africa , Construction industry -- Standards -- South Africa Construction industry -- Law and legislation -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/31655 , vital:31645
- Description: The construction industry plays a major role in South Africa’s economic development. Since promulgation of the Construction Regulations, the expectation is that project stakeholders are placing more emphasis on H&S to contribute to project success. The study aimed to assess the impact of the involvement of clients and other project stakeholders on the overall project H&S performance on projects undertaken by a large water utility. The scope was limited to the organisation’s engineering and operations division and its internal project stakeholders, namely the designers, quantity surveyors, project managers, and construction H&S professionals. Local literature pointed out that poor construction H&S performance is attributable to a lack of management commitment, inadequate supervision, inadequate or lack of H&S training, lack of worker involvement, personal risk appreciation and work pressures (cidb, 2009: 37). International literature indicated that the total CoA exceeds the cost of H&S (cidb, 2009: 9). Quantitative methods were utilised in two phases to gather and analyse data. In Phase 1, a questionnaire was developed and distributed to a target population, and in Phase 2, data was obtained from existing records of historic and completed project files for projects undertaken by the water utility. A total of 67 responses were used to analyse data. All stakeholders somehow contributed to H&S however, most respondents regarded CHS professionals, contractors and PMs as the primary stakeholders. The study found that stakeholders perceived H&S to be influenced during the later rather than the initial stages of projects and that H&S actions were significantly undertaken during stage 5. The frequency of H&S actions varied with each stakeholder dependent on the stage in which they were involved in. Recommendations were for H&S to be integrated in the initial stages of projects and for a follow up research to be conducted to investigate if there are improvements during the six project stages after full implementation of the Construction Regulations 2014. This requirement will force industry to comply and most importantly to drive joint efforts by the various stakeholders.
- Full Text:
- Date Issued: 2018
Procurement challenges faced by Eskom contractors during the tender stage
- Authors: Hlalutye, Thandiwe
- Date: 2018
- Subjects: Management -- Procurement -- South Africa -- Northern Cape , Project management -- South Africa -- Northern Cape Contractors' operation -- South Africa -- Northern Cape -- Finance
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/30260 , vital:30913
- Description: The procurement process within South Africa has become an increasing focus in open market access for local economic development. The government introduced Preferential Procurement Policy Frame Act 5 of 2000 (PPPFA) which must be followed by all government owned organisations, including parastatals. Eskom, therefore, has to abide to this regulation and, since it started utilising the Act in its tendering process, there has been a challenge to getting contractors who are commercially and technically approved to be able to execute work or projects. The aim of this study is to examine challenges faced by Eskom Northern Cape Operating Unit contractors during the tender stage in terms of tender requirements, whereby they fail to submit all required tender returnables and fail to meet a set threshold in order to be successful and being awarded with the contract. This study undertook an empirical study using a case study of Eskom after a literature review. A questionnaire was used to collect data from all the active contractors on the Eskom Northern Cape Operating Unit data base. The key findings included that; contractors agreed that they still lack understanding of a quality management system. However they disagreed that they are not complying with safety health and environment and that they lack knowledge of technical requirements which leads them to not submitting objective evidence. The study concluded that contracting firms still do not comply with procurement requirements during the tender stage.
- Full Text:
- Date Issued: 2018
- Authors: Hlalutye, Thandiwe
- Date: 2018
- Subjects: Management -- Procurement -- South Africa -- Northern Cape , Project management -- South Africa -- Northern Cape Contractors' operation -- South Africa -- Northern Cape -- Finance
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/30260 , vital:30913
- Description: The procurement process within South Africa has become an increasing focus in open market access for local economic development. The government introduced Preferential Procurement Policy Frame Act 5 of 2000 (PPPFA) which must be followed by all government owned organisations, including parastatals. Eskom, therefore, has to abide to this regulation and, since it started utilising the Act in its tendering process, there has been a challenge to getting contractors who are commercially and technically approved to be able to execute work or projects. The aim of this study is to examine challenges faced by Eskom Northern Cape Operating Unit contractors during the tender stage in terms of tender requirements, whereby they fail to submit all required tender returnables and fail to meet a set threshold in order to be successful and being awarded with the contract. This study undertook an empirical study using a case study of Eskom after a literature review. A questionnaire was used to collect data from all the active contractors on the Eskom Northern Cape Operating Unit data base. The key findings included that; contractors agreed that they still lack understanding of a quality management system. However they disagreed that they are not complying with safety health and environment and that they lack knowledge of technical requirements which leads them to not submitting objective evidence. The study concluded that contracting firms still do not comply with procurement requirements during the tender stage.
- Full Text:
- Date Issued: 2018
Integrating sustainability principles in construction health and safety management practices in Zimbabwe
- Authors: Chigara, Benviolent
- Date: 2018
- Subjects: Sustainable construction -- Zimbabwe , Construction industry -- Safety measures Industrial safety -- Zimbabwe -- Management
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/23459 , vital:30565
- Description: The construction industry is an important industry to national development through the provision of infrastructure and creation of employment, and hence contributing to sustainable development. Nevertheless, the construction industry has a poor health and safety (H&S) and environmental record. Globally, the construction industry is a leading contributor to workplace fatalities, injuries, and disease. In Zimbabwe, the Millennium Towers accident, which resulted in 15 construction workers losing their lives, compromised the integrity of construction H&S management, and highlighted the need to improve H&S management in the sector. This study examined H&S management in Zimbabwe and developed a framework for integrating sustainability into H&S management practices. The study employed a mixed method research design involving the use of interviews and questionnaires to collect primary data from contractors, consultants, government, clients, and workers in Harare and Bulawayo. A total of 101 questionnaires were successfully completed and analysed, representing a response rate of 55.6%. The data from questionnaires were analysed with the help of the SPSS software v.23 to produce descriptive and inferential statistics. The results of the study suggest that H&S practices are inadequate as demonstrated by the extent to which workers are exposed to hazards and the occurrence of injuries, disease, and fatalities. The factors contributing to workers’ exposure to hazards and the occurrence of injuries, disease, and fatalities include, inter alia, inadequate planning for H&S, inadequate hazard identification and risk assessments (HIRAs), inadequate management of hazards, inadequate occupational health (OH) surveillance, appointment of stakeholders who do not systematically manage H&S, inadequate design HIRAs, and unsafe work practices. The problem is amplified by inadequate integration of H&S within procurement systems, which limit the extent to which contractors make financial provision for H&S. Regrettably, workplace fatalities, injuries, and disease diminish the quality of life for the injured workers, increase project cost and delays project completion. Against this background, the study investigated the integration of sustainability principles in construction H&S as a strategy to improve H&S practices in Zimbabwe. The outcome of that investigation was a strategy and interventions, and a framework for improved practices in the form of a Sustainability Framework for Construction H&S (SFCHS). The validation of the SFCHS by construction practitioners confirms the importance of the recommended practices to reducing workplace fatalities, injuries, and disease in Zimbabwe and beyond. The development of a SFCHS, as a strategy to improve H&S practices in Zimbabwe, and the validation thereof, resulted in a significant contribution to the related body of knowledge. Nevertheless, the transition to sustainable H&S practices require contractors, consultants, government, clients and workers to take a proactive role relative to the recommended practices in the SFCHS. Further studies can explore the responsiveness of sustainability factors relative to the occurrence of injuries, disease and fatalities based on selected case studies.
- Full Text:
- Date Issued: 2018
- Authors: Chigara, Benviolent
- Date: 2018
- Subjects: Sustainable construction -- Zimbabwe , Construction industry -- Safety measures Industrial safety -- Zimbabwe -- Management
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/23459 , vital:30565
- Description: The construction industry is an important industry to national development through the provision of infrastructure and creation of employment, and hence contributing to sustainable development. Nevertheless, the construction industry has a poor health and safety (H&S) and environmental record. Globally, the construction industry is a leading contributor to workplace fatalities, injuries, and disease. In Zimbabwe, the Millennium Towers accident, which resulted in 15 construction workers losing their lives, compromised the integrity of construction H&S management, and highlighted the need to improve H&S management in the sector. This study examined H&S management in Zimbabwe and developed a framework for integrating sustainability into H&S management practices. The study employed a mixed method research design involving the use of interviews and questionnaires to collect primary data from contractors, consultants, government, clients, and workers in Harare and Bulawayo. A total of 101 questionnaires were successfully completed and analysed, representing a response rate of 55.6%. The data from questionnaires were analysed with the help of the SPSS software v.23 to produce descriptive and inferential statistics. The results of the study suggest that H&S practices are inadequate as demonstrated by the extent to which workers are exposed to hazards and the occurrence of injuries, disease, and fatalities. The factors contributing to workers’ exposure to hazards and the occurrence of injuries, disease, and fatalities include, inter alia, inadequate planning for H&S, inadequate hazard identification and risk assessments (HIRAs), inadequate management of hazards, inadequate occupational health (OH) surveillance, appointment of stakeholders who do not systematically manage H&S, inadequate design HIRAs, and unsafe work practices. The problem is amplified by inadequate integration of H&S within procurement systems, which limit the extent to which contractors make financial provision for H&S. Regrettably, workplace fatalities, injuries, and disease diminish the quality of life for the injured workers, increase project cost and delays project completion. Against this background, the study investigated the integration of sustainability principles in construction H&S as a strategy to improve H&S practices in Zimbabwe. The outcome of that investigation was a strategy and interventions, and a framework for improved practices in the form of a Sustainability Framework for Construction H&S (SFCHS). The validation of the SFCHS by construction practitioners confirms the importance of the recommended practices to reducing workplace fatalities, injuries, and disease in Zimbabwe and beyond. The development of a SFCHS, as a strategy to improve H&S practices in Zimbabwe, and the validation thereof, resulted in a significant contribution to the related body of knowledge. Nevertheless, the transition to sustainable H&S practices require contractors, consultants, government, clients and workers to take a proactive role relative to the recommended practices in the SFCHS. Further studies can explore the responsiveness of sustainability factors relative to the occurrence of injuries, disease and fatalities based on selected case studies.
- Full Text:
- Date Issued: 2018
Motivation of construction workers in the nelson Mandela Bay Metropole, South Africa
- Jesumoroti, Christtestimony Oluwafemi
- Authors: Jesumoroti, Christtestimony Oluwafemi
- Date: 2018
- Subjects: Employee motivation -- South Africa -- Nelson Mandela Bay Municipality , Performance standards -- South Africa -- Nelson Mandela Bay Municipality Construction workers -- South Africa -- Nelson Mandela Bay Municipality Construction industry -- Employees -- South Africa -- Nelson Mandela Bay Municipality
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/30573 , vital:30962
- Description: The issue of construction workers’ motivation has become a subject of debate among construction project management professionals. Construction workers mostly work long hours in relatively disagreeable environments and, far from their families. Most of the activities are done under difficult conditions including harsh weather conditions, however, employees are required to be motivated towards ensuring the attractiveness of the industry to them. Moreover, there are diverse perceptions that the motivation of construction workers positively impacts construction workers performance or rather adversely affects the general performance of construction workers. Although, workers motivation has been proven to improve construction productivity globally, motivation of construction workers seems not to be effectively implemented in South African Construction Industry. As a result, it is difficult for management to identify motivational factors that affect workers productivity in a work environment. A quantitative research approach was employed to analyse the result obtained from a structured questionnaire survey. The research respondents included: bricklayers, plumbers, concrete workers, electricians, carpenters, and professionals. This study used data from primary source which focus on tradesman, labourer and professional context. A survey was conducted with tradesmen, labourers and professionals regarding motivation on construction workers which was conducted in the Nelson Mandela Bay Metropole, Eastern Cape. It was found that motivation is important to construction workers’ performance. Awarding bonuses to workers is important to improving workers’ efficiency and there is a need for construction workers recognition by management. Construction industry stakeholder should shift their attention and prioritise the motivation of its workers since the industry has a way of cubing poverty and uplifting the county’s economy. The findings revealed that motivational communication, rather than functional communication, would enhance worker productivity. It was found that both intrinsic and extrinsic rewards are needed to improve worker productivity. It was also found that positive reinforcement techniques, should be used to enhance worker productivity. The findings from this research study revealed that the motivational theories apply to construction workers, and management needs to apply these theories wisely to achieve improved productivity. The study therefore concludes that motivational techniques are necessary to improve construction workers productivity on a vii construction site. It is recommended that supervisors use motivational communication, extrinsic rewards, intrinsic rewards and positive reinforcement to motivate their workers to achieve higher levels of productivity.
- Full Text:
- Date Issued: 2018
- Authors: Jesumoroti, Christtestimony Oluwafemi
- Date: 2018
- Subjects: Employee motivation -- South Africa -- Nelson Mandela Bay Municipality , Performance standards -- South Africa -- Nelson Mandela Bay Municipality Construction workers -- South Africa -- Nelson Mandela Bay Municipality Construction industry -- Employees -- South Africa -- Nelson Mandela Bay Municipality
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/30573 , vital:30962
- Description: The issue of construction workers’ motivation has become a subject of debate among construction project management professionals. Construction workers mostly work long hours in relatively disagreeable environments and, far from their families. Most of the activities are done under difficult conditions including harsh weather conditions, however, employees are required to be motivated towards ensuring the attractiveness of the industry to them. Moreover, there are diverse perceptions that the motivation of construction workers positively impacts construction workers performance or rather adversely affects the general performance of construction workers. Although, workers motivation has been proven to improve construction productivity globally, motivation of construction workers seems not to be effectively implemented in South African Construction Industry. As a result, it is difficult for management to identify motivational factors that affect workers productivity in a work environment. A quantitative research approach was employed to analyse the result obtained from a structured questionnaire survey. The research respondents included: bricklayers, plumbers, concrete workers, electricians, carpenters, and professionals. This study used data from primary source which focus on tradesman, labourer and professional context. A survey was conducted with tradesmen, labourers and professionals regarding motivation on construction workers which was conducted in the Nelson Mandela Bay Metropole, Eastern Cape. It was found that motivation is important to construction workers’ performance. Awarding bonuses to workers is important to improving workers’ efficiency and there is a need for construction workers recognition by management. Construction industry stakeholder should shift their attention and prioritise the motivation of its workers since the industry has a way of cubing poverty and uplifting the county’s economy. The findings revealed that motivational communication, rather than functional communication, would enhance worker productivity. It was found that both intrinsic and extrinsic rewards are needed to improve worker productivity. It was also found that positive reinforcement techniques, should be used to enhance worker productivity. The findings from this research study revealed that the motivational theories apply to construction workers, and management needs to apply these theories wisely to achieve improved productivity. The study therefore concludes that motivational techniques are necessary to improve construction workers productivity on a vii construction site. It is recommended that supervisors use motivational communication, extrinsic rewards, intrinsic rewards and positive reinforcement to motivate their workers to achieve higher levels of productivity.
- Full Text:
- Date Issued: 2018
The use of building information modelling as a tool to improve informed design communication between student and lecturer during critique sessions
- Authors: Basson, Jean-Pierre
- Date: 2018
- Subjects: Building information modeling , Building -- Data processing Construction industry -- South Africa Construction projects -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/23680 , vital:30598
- Description: Within the design studio at the Department of Architecture, Nelson Mandela University, the timeous submission of design projects is a problem. After close inspection, it is noted that students spend weeks on conceptual design ideas with no progressions towards completion. The purpose of the study is thus to determine whether building information modelling (BIM), as opposed to the traditional method of design, can be used to improve informed design communication during conceptual design for the first-year master of architecture students and contribute to timeous design project submission. A cohort comparison rubric will be used as the method for looking at the qualitative attributes of design intention, function, aesthetics, and sustainability. The 2016 cohort made use of the traditional design method, whereas for the 2017 cohort the BIM course was introduced in the computer module with implementation in the design studio. The work of nine students from both cohorts was analysed and findings include the following: improved drawing type availability, accuracy, and quality; reduced time spent on redundant work; inclusive discussions compared to isolated critique sessions; reduced printing costs - and the establishment of “what if” scenarios early in the project. Based upon the research findings it can be concluded that BIM as a teaching strategy and process has the capability of improving the communication between student and lecturer in the conceptual stage, thereby leading to a more timeous submission. It is recommended that BIM education must be incorporated in the undergraduate programme thereby providing students with an appropriate platform for expressing conceptual ideas more effectively within the design course.
- Full Text:
- Date Issued: 2018
- Authors: Basson, Jean-Pierre
- Date: 2018
- Subjects: Building information modeling , Building -- Data processing Construction industry -- South Africa Construction projects -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/23680 , vital:30598
- Description: Within the design studio at the Department of Architecture, Nelson Mandela University, the timeous submission of design projects is a problem. After close inspection, it is noted that students spend weeks on conceptual design ideas with no progressions towards completion. The purpose of the study is thus to determine whether building information modelling (BIM), as opposed to the traditional method of design, can be used to improve informed design communication during conceptual design for the first-year master of architecture students and contribute to timeous design project submission. A cohort comparison rubric will be used as the method for looking at the qualitative attributes of design intention, function, aesthetics, and sustainability. The 2016 cohort made use of the traditional design method, whereas for the 2017 cohort the BIM course was introduced in the computer module with implementation in the design studio. The work of nine students from both cohorts was analysed and findings include the following: improved drawing type availability, accuracy, and quality; reduced time spent on redundant work; inclusive discussions compared to isolated critique sessions; reduced printing costs - and the establishment of “what if” scenarios early in the project. Based upon the research findings it can be concluded that BIM as a teaching strategy and process has the capability of improving the communication between student and lecturer in the conceptual stage, thereby leading to a more timeous submission. It is recommended that BIM education must be incorporated in the undergraduate programme thereby providing students with an appropriate platform for expressing conceptual ideas more effectively within the design course.
- Full Text:
- Date Issued: 2018
Use of recycled rubber tyres as an alternative ingredient in cementitious building materials
- Authors: Yuill, Robert Mark
- Date: 2018
- Subjects: Building materials , Building materials -- Environmental aspects Sustainable construction Recycled products
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/29783 , vital:30777
- Description: The need to incorporate recycled materials in building products is becoming more important than ever before. There is an abundance of waste rubber tyres which in turn results in a waste management issue. The use of waste rubber tyres in cementitious building material provides a possible solution to the problem (Kathomi, 2009:10). Previous research has shown the introduction of recycled rubber tyre crumb can improve the durability, thermal and acoustic performance in residential and commercial buildings. This could result in lives of dwellers in concrete block buildings in South Africa improving due to these characteristics whilst potentially creating a cost-effective, sustainable building material. A grading analysis, loose and compacted bulk densities and relative densities were determined to provide a mix design. Three tests were conducted for this study namely compressive strength, fire and thermal performance and acoustic performance. The testing was conducted on 100mmx100mm cubes at varying rubber replacement percentages. The replacement values were 10%, 20% and 30% tested against a control of ordinary concrete. The waste rubber crumb was a replacement for sand. The research of this study showed 20 % decrease of compression strength at 10 % rubber replacement compared to the control, 55 % decrease at 20 % rubber replacement and 75% decrease at 30 % rubber replacement. The thermal performance test showed a 24 % lower temperature for 10 % rubber replacement compared to the control, 39 % lower temperature at 20 % rubber replacement and 52 % lower temperature at 30 % rubber replacement. All rubber replacement % samples and the control performed adequately in the flame resistance test. The smoke density test showed that all rubber replacement % samples did not release a quantity of smoke which would be deemed dangerous. The acoustic performance test showed the values at 10% rubber replacement was 6 % lower; at 20% rubber replacement; 4% lower and at 30% rubber replacement 14 % lower. Based on these results, the acoustic performance regarding transmission increases with a rubber replacement % higher than 20 %.
- Full Text:
- Date Issued: 2018
- Authors: Yuill, Robert Mark
- Date: 2018
- Subjects: Building materials , Building materials -- Environmental aspects Sustainable construction Recycled products
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/29783 , vital:30777
- Description: The need to incorporate recycled materials in building products is becoming more important than ever before. There is an abundance of waste rubber tyres which in turn results in a waste management issue. The use of waste rubber tyres in cementitious building material provides a possible solution to the problem (Kathomi, 2009:10). Previous research has shown the introduction of recycled rubber tyre crumb can improve the durability, thermal and acoustic performance in residential and commercial buildings. This could result in lives of dwellers in concrete block buildings in South Africa improving due to these characteristics whilst potentially creating a cost-effective, sustainable building material. A grading analysis, loose and compacted bulk densities and relative densities were determined to provide a mix design. Three tests were conducted for this study namely compressive strength, fire and thermal performance and acoustic performance. The testing was conducted on 100mmx100mm cubes at varying rubber replacement percentages. The replacement values were 10%, 20% and 30% tested against a control of ordinary concrete. The waste rubber crumb was a replacement for sand. The research of this study showed 20 % decrease of compression strength at 10 % rubber replacement compared to the control, 55 % decrease at 20 % rubber replacement and 75% decrease at 30 % rubber replacement. The thermal performance test showed a 24 % lower temperature for 10 % rubber replacement compared to the control, 39 % lower temperature at 20 % rubber replacement and 52 % lower temperature at 30 % rubber replacement. All rubber replacement % samples and the control performed adequately in the flame resistance test. The smoke density test showed that all rubber replacement % samples did not release a quantity of smoke which would be deemed dangerous. The acoustic performance test showed the values at 10% rubber replacement was 6 % lower; at 20% rubber replacement; 4% lower and at 30% rubber replacement 14 % lower. Based on these results, the acoustic performance regarding transmission increases with a rubber replacement % higher than 20 %.
- Full Text:
- Date Issued: 2018
Challenges facing the state of construction health and safety management practices within the Eastern Cape: a case of the Sarah Baartman District
- Authors: Mafuya, Nomakhwezi
- Date: 2018
- Subjects: Industrial safety -- Management , Construction industry -- South Africa -- Eastern Cape Construction industry -- Safety measures -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/31532 , vital:31504
- Description: The construction industry has a poor Health and Safety (H&S) record globally and South Africa is no exception (Haupt, 2016: 1). The construction industry is integrally a high-impact and dangerous industry with less than a 50% ratio in compliance to H&S standards (PricewaterhouseCoppers (PwC), 2016). This study is aimed towards evolving a solution to mitigate the fatalities and injuries, occupational health hazards, non-compliance with legislation and design originated hazards and the reoccurring problems experienced by the Eastern Cape Department of Public Works (ECDPW) on projects. Literature points out that H&S performance is attributable to a lack of management commitment, inadequate supervision, inadequate H&S training, and lack of worker involvement (construction industry development board (cidb), 2009: 36). Huang and Hinze (2006: 179) contend that clients‟ participation in project H&S can significantly influence project performance. Various researchers have amplified the importance of leadership roles and involvement of clients in H&S. A quantitative survey and qualitative inquiry were utilised to gather and analyse data within the Eastern Cape province of South Africa. Three questionnaires were developed and distributed to a target population, and interviews were conducted. The study focuses on seven schools, namely; Stormsriver, Jubilee, Mfesane, Bongweni, David Livingstone, Kaiser Ngxwane and Bethelsdorp, which are on-going for the 2016/2017 financial period during which the research study was conducted. A total of 136 responses were used to analyse the data. All project stakeholders, namely: project managers, contractors‟ site managers, and workers contributed to the study. The frequency of H&S actions varied with each stakeholder dependent on the stage in which they were involved. The study determined that extensive inadequacy of construction expertise in terms of H&S including H&S consultants and departmental H&S personnel, inadequate management and supervision on site, inadequate workers participation, inadequate H&S training, inadequate expertise in H&S management, inadequate designer report, inadequate H&S knowledge and awareness, negligence, unsafe acts, unskilled workers, unsafe conditions, non-compliance with H&S regulations, Safe v Operating Procedure (SOPs) and Safe Working Procedures (SWPs), inadequate commitment of various project stakeholders, ignorance, poor client H&S leadership throughout certain aspects of the ECDPW projects are the primary cause of fatalities and injuries, ill-health, design originated hazards, non-compliance and the reoccurrence of problems. Recommendations were for H&S to be integrated within the Departments internal project systems from project inception to project close out, and to enhance H&S knowledge and skills in order to mitigate the reoccurrences of problems on projects.
- Full Text:
- Date Issued: 2018
- Authors: Mafuya, Nomakhwezi
- Date: 2018
- Subjects: Industrial safety -- Management , Construction industry -- South Africa -- Eastern Cape Construction industry -- Safety measures -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/31532 , vital:31504
- Description: The construction industry has a poor Health and Safety (H&S) record globally and South Africa is no exception (Haupt, 2016: 1). The construction industry is integrally a high-impact and dangerous industry with less than a 50% ratio in compliance to H&S standards (PricewaterhouseCoppers (PwC), 2016). This study is aimed towards evolving a solution to mitigate the fatalities and injuries, occupational health hazards, non-compliance with legislation and design originated hazards and the reoccurring problems experienced by the Eastern Cape Department of Public Works (ECDPW) on projects. Literature points out that H&S performance is attributable to a lack of management commitment, inadequate supervision, inadequate H&S training, and lack of worker involvement (construction industry development board (cidb), 2009: 36). Huang and Hinze (2006: 179) contend that clients‟ participation in project H&S can significantly influence project performance. Various researchers have amplified the importance of leadership roles and involvement of clients in H&S. A quantitative survey and qualitative inquiry were utilised to gather and analyse data within the Eastern Cape province of South Africa. Three questionnaires were developed and distributed to a target population, and interviews were conducted. The study focuses on seven schools, namely; Stormsriver, Jubilee, Mfesane, Bongweni, David Livingstone, Kaiser Ngxwane and Bethelsdorp, which are on-going for the 2016/2017 financial period during which the research study was conducted. A total of 136 responses were used to analyse the data. All project stakeholders, namely: project managers, contractors‟ site managers, and workers contributed to the study. The frequency of H&S actions varied with each stakeholder dependent on the stage in which they were involved. The study determined that extensive inadequacy of construction expertise in terms of H&S including H&S consultants and departmental H&S personnel, inadequate management and supervision on site, inadequate workers participation, inadequate H&S training, inadequate expertise in H&S management, inadequate designer report, inadequate H&S knowledge and awareness, negligence, unsafe acts, unskilled workers, unsafe conditions, non-compliance with H&S regulations, Safe v Operating Procedure (SOPs) and Safe Working Procedures (SWPs), inadequate commitment of various project stakeholders, ignorance, poor client H&S leadership throughout certain aspects of the ECDPW projects are the primary cause of fatalities and injuries, ill-health, design originated hazards, non-compliance and the reoccurrence of problems. Recommendations were for H&S to be integrated within the Departments internal project systems from project inception to project close out, and to enhance H&S knowledge and skills in order to mitigate the reoccurrences of problems on projects.
- Full Text:
- Date Issued: 2018
The implications of utilising small, medium and micro sized enterprises on construction projects
- Authors: Kampman, Juan
- Date: 2018
- Subjects: Small business -- South Africa , Construction industry -- Management Construction industry -- Economic aspects Construction industry -- Cost effectiveness
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/30698 , vital:31031
- Description: The National Development Plan envisages that eleven million jobs will be created in South Africa by small and medium enterprises (SME) by 2030. This vehicle aims to generate employment opportunities, redistribute income and contribute to poverty alleviation. This research highlights the main hurdles associated with the appointment of small, medium and micro-enterprise (SMME) contractors while providing recommendations geared towards the development of a sustainable industry. This study focuses on the cost, quality, programme, and health and safety implications of utilising SMMEs on construction projects. The study is seen from the perspective of the client’s representatives on construction projects and it focuses on South African National Roads Agency Limited (SANRAL) projects in the Eastern Cape. The respondents answered a structured web-based questionnaire which included open and closed questions. The research determined that in order to provide the best quality work, at the best price, on time, and in a safe manner, SMMEs who are employed on construction projects should be experienced or should be trained and mentored, or both. To ensure that SMMEs function at the required level with regard to the cost of their service, the quality of work, construction duration, and health and safety, it is fundamental to train and mentor the SMMEs. In order to assist SMMEs, they should be supported by providing construction material, the required tools, and personal protective equipment at the start of a project. It was proposed that SMME guidelines be drafted in order to standardise implementation methodologies which can be applied throughout the construction industry.
- Full Text:
- Date Issued: 2018
- Authors: Kampman, Juan
- Date: 2018
- Subjects: Small business -- South Africa , Construction industry -- Management Construction industry -- Economic aspects Construction industry -- Cost effectiveness
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/30698 , vital:31031
- Description: The National Development Plan envisages that eleven million jobs will be created in South Africa by small and medium enterprises (SME) by 2030. This vehicle aims to generate employment opportunities, redistribute income and contribute to poverty alleviation. This research highlights the main hurdles associated with the appointment of small, medium and micro-enterprise (SMME) contractors while providing recommendations geared towards the development of a sustainable industry. This study focuses on the cost, quality, programme, and health and safety implications of utilising SMMEs on construction projects. The study is seen from the perspective of the client’s representatives on construction projects and it focuses on South African National Roads Agency Limited (SANRAL) projects in the Eastern Cape. The respondents answered a structured web-based questionnaire which included open and closed questions. The research determined that in order to provide the best quality work, at the best price, on time, and in a safe manner, SMMEs who are employed on construction projects should be experienced or should be trained and mentored, or both. To ensure that SMMEs function at the required level with regard to the cost of their service, the quality of work, construction duration, and health and safety, it is fundamental to train and mentor the SMMEs. In order to assist SMMEs, they should be supported by providing construction material, the required tools, and personal protective equipment at the start of a project. It was proposed that SMME guidelines be drafted in order to standardise implementation methodologies which can be applied throughout the construction industry.
- Full Text:
- Date Issued: 2018
Solar thermal performance of a conical helix receiver tube mounted on a parabolic dish
- Nandjembo, Frans Nelongo Pandeni
- Authors: Nandjembo, Frans Nelongo Pandeni
- Date: 2018
- Subjects: Solar energy , Power resources Energy conversion
- Language: English
- Type: Thesis , Masters , MEng
- Identifier: http://hdl.handle.net/10948/32860 , vital:32379
- Description: This report presents the investigation of a conical helix receiver tube with a zero shading factor to achieve optimal performance of a small concentrating solar thermal collector. In order to understand the working performance of the conical helix receiver tube, it was compared to that of a flat spiral receiver tube. This was done by measuring temperatures at various points as well as the volume airflow rate. Optical studies were achieved using SolTrace to quantify spillage losses and optical efficiency of the dish used in the study from the parabolic dish using a simulation in SolTrace. Comparative tests were conducted between the conical receiver tube and equivalent flat receiver tube at volume air flow rates between 30 m3.h−1 and 45 m3.h−1. The conical helix receiver tube showed a linear temperature distribution, from the outer surface tube towards the inner surface tube in an ascending order, while the flat spiral receiver tube showed a non-linear temperature distribution, its temperature increased in the middle section and decreased towards the inner surface tube. The research showed that an optimally configured helical receiver tube with linear temperature change along its length outperformed the flat receiver tube.
- Full Text:
- Date Issued: 2018
- Authors: Nandjembo, Frans Nelongo Pandeni
- Date: 2018
- Subjects: Solar energy , Power resources Energy conversion
- Language: English
- Type: Thesis , Masters , MEng
- Identifier: http://hdl.handle.net/10948/32860 , vital:32379
- Description: This report presents the investigation of a conical helix receiver tube with a zero shading factor to achieve optimal performance of a small concentrating solar thermal collector. In order to understand the working performance of the conical helix receiver tube, it was compared to that of a flat spiral receiver tube. This was done by measuring temperatures at various points as well as the volume airflow rate. Optical studies were achieved using SolTrace to quantify spillage losses and optical efficiency of the dish used in the study from the parabolic dish using a simulation in SolTrace. Comparative tests were conducted between the conical receiver tube and equivalent flat receiver tube at volume air flow rates between 30 m3.h−1 and 45 m3.h−1. The conical helix receiver tube showed a linear temperature distribution, from the outer surface tube towards the inner surface tube in an ascending order, while the flat spiral receiver tube showed a non-linear temperature distribution, its temperature increased in the middle section and decreased towards the inner surface tube. The research showed that an optimally configured helical receiver tube with linear temperature change along its length outperformed the flat receiver tube.
- Full Text:
- Date Issued: 2018
A multi-stakeholder approach to productivity improvement in the South African construction industry
- Authors: Adebowale, Oluseyi Julius
- Date: 2018
- Subjects: Labor productivity , Construction industry -- Labor productivity Construction industry -- South Africa Construction industry -- Management
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/19597 , vital:28902
- Description: As poor productivity in construction continues to constitute a setback to projects’ success in different countries of the world, the situation in South African construction is no exception. Poor productivity on construction projects and its detrimental impact on project objectives have continually resonated for decades. As a result, several strategies, interventions, and measures that aimed at improving productivity in the construction sector have been proposed. Nevertheless, the phenomenon importunately creates a major challenge on construction projects, and by extension, the construction industry especially in developing countries. Even when construction management literature acknowledged the commonalities in productivity influences, the practice of addressing construction productivity influences as separate entities has gained much relevance over the years. Taking into perspective, the multidisciplinary and complexity inherent in construction, a systemic approach to addressing construction productivity influences is fast becoming essential. This study addressed productivity-influencing factors by considering factors that are related to rework, shortage of construction resources, constructability, political, socio-economic, working environment, welfare conditions, disputes, planning and training. Consequently, the interdependencies of the most significant productivity-influencing factors in South African construction was developed in the form of a qualitative model. The study adopts the underlying assumptions of the quantitative approach, but also accepts some qualitative data. With regards to the subject of enquiry, the paradigm of the research is positivism which consists of realists’ ontological prescriptions and objectivists’ epistemological prescriptions. Site engineers, site managers, and site supervisors working for cidb registered contractors in four South African provinces constitute the sample stratum. Statistical Package for the Social Sciences (SPSS) version 24 was used to analyse the data gathered from these project participants; both descriptive and inferential statistics were used. Descriptive statistics was used to summarise and describe the data obtained, while inferential statistics in the form of analysis of variance, T-test, and Tukey post hoc test were adopted. The study reported the most significant factors which negatively influence productivity on South African construction projects as inadequate workers’ skills, defective workmanship, the practice of awarding contracts to lowest bidders, political activities resulting in industrial action, inadequate contractors’ experience in project planning, payment delays by contractors, and corruption. Furthermore, it was found that contractors largely share similar perceptions regarding the factors that constrain productivity growth in South African construction. The approximate level of labour, material, and plant productivity on South African construction projects is 50.4%, 72.9%, and 62.0% respectively, while the approximate multifactor productivity was estimated as 61.8%. The study concluded that productivity has a considerable relationship with time and cost and a less potent relationship with quality. Based on the research findings, contractors’, consultants’, clients’ and government qualitative intervention models were proposed while recommendations towards improving South African construction productivity were made. The study recommended the reinvention of the apprentice training system to develop skills in construction, the involvement of stakeholders in improving workers’ skills, improved collaboration between the construction industry and higher institutions of learning regarding curricula development, adequate supervision of construction activities to mitigate the propagation of rework on construction projects, character in leadership, and integrity of project stakeholders.
- Full Text:
- Date Issued: 2018
- Authors: Adebowale, Oluseyi Julius
- Date: 2018
- Subjects: Labor productivity , Construction industry -- Labor productivity Construction industry -- South Africa Construction industry -- Management
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/19597 , vital:28902
- Description: As poor productivity in construction continues to constitute a setback to projects’ success in different countries of the world, the situation in South African construction is no exception. Poor productivity on construction projects and its detrimental impact on project objectives have continually resonated for decades. As a result, several strategies, interventions, and measures that aimed at improving productivity in the construction sector have been proposed. Nevertheless, the phenomenon importunately creates a major challenge on construction projects, and by extension, the construction industry especially in developing countries. Even when construction management literature acknowledged the commonalities in productivity influences, the practice of addressing construction productivity influences as separate entities has gained much relevance over the years. Taking into perspective, the multidisciplinary and complexity inherent in construction, a systemic approach to addressing construction productivity influences is fast becoming essential. This study addressed productivity-influencing factors by considering factors that are related to rework, shortage of construction resources, constructability, political, socio-economic, working environment, welfare conditions, disputes, planning and training. Consequently, the interdependencies of the most significant productivity-influencing factors in South African construction was developed in the form of a qualitative model. The study adopts the underlying assumptions of the quantitative approach, but also accepts some qualitative data. With regards to the subject of enquiry, the paradigm of the research is positivism which consists of realists’ ontological prescriptions and objectivists’ epistemological prescriptions. Site engineers, site managers, and site supervisors working for cidb registered contractors in four South African provinces constitute the sample stratum. Statistical Package for the Social Sciences (SPSS) version 24 was used to analyse the data gathered from these project participants; both descriptive and inferential statistics were used. Descriptive statistics was used to summarise and describe the data obtained, while inferential statistics in the form of analysis of variance, T-test, and Tukey post hoc test were adopted. The study reported the most significant factors which negatively influence productivity on South African construction projects as inadequate workers’ skills, defective workmanship, the practice of awarding contracts to lowest bidders, political activities resulting in industrial action, inadequate contractors’ experience in project planning, payment delays by contractors, and corruption. Furthermore, it was found that contractors largely share similar perceptions regarding the factors that constrain productivity growth in South African construction. The approximate level of labour, material, and plant productivity on South African construction projects is 50.4%, 72.9%, and 62.0% respectively, while the approximate multifactor productivity was estimated as 61.8%. The study concluded that productivity has a considerable relationship with time and cost and a less potent relationship with quality. Based on the research findings, contractors’, consultants’, clients’ and government qualitative intervention models were proposed while recommendations towards improving South African construction productivity were made. The study recommended the reinvention of the apprentice training system to develop skills in construction, the involvement of stakeholders in improving workers’ skills, improved collaboration between the construction industry and higher institutions of learning regarding curricula development, adequate supervision of construction activities to mitigate the propagation of rework on construction projects, character in leadership, and integrity of project stakeholders.
- Full Text:
- Date Issued: 2018
A framework for the integration of mobile technology into adventure sport for the purpose of increasing participant safety
- Authors: Mills, Craig John
- Date: 2018
- Subjects: Mobile communication systems , Health promotion -- Technological innovations Sports -- Technological innovations Cell phones -- Health aspects
- Language: English
- Type: Thesis , Masters , MIT
- Identifier: http://hdl.handle.net/10948/32099 , vital:31958
- Description: The sporting industry has seen incredible advancements with the use of information technology. Technology is used in the sporting industry for training, coaching and even as a deciding factor of a game result. There are certain sports which require individuals to venture into isolated environments, these sports have been termed adventure or extreme sports. Due to the extreme environmental factors that can occur with adventure sport, it is possible for an individual to experience an emergency situation. Emergency situations can occur at any time, and this is especially true in adventure sport. Adventure sport such as ocean and river kayaking require individuals to venture into isolated environments, where if an emergency situation occurs could result in an individual left stranded waiting for emergency rescue. Adventure sport participants and Event Organizers are aware of the dangers associated with this type of adventure sport, but there is currently no requirement to have a mobile technology device present during kayaking events. The main purpose of this dissertation was to evaluate the current use of mobile technology in adventure sport in the Eastern Cape province of South Africa. To accomplish this two literature reviews were conducted which identi_ed information on the two main themes which are adventure sport and mobile technology. To produce information from the ocean and river kayaking community an online questionnaire was distributed to several kayaking clubs in the Eastern Cape province of South Africa. This dissertation also presents a framework that proposes the use of mobile technology hardware and software by participants and event organisers in an attempt to increase the safety of events in this form of adventure sport. It is hoped that the framework for using mobile technology to increase the safety of adventure sport proposed in this research, may provide clear guidance for the achievement of a safer sporting experience for the participants of ocean and river kayaking.
- Full Text:
- Date Issued: 2018
- Authors: Mills, Craig John
- Date: 2018
- Subjects: Mobile communication systems , Health promotion -- Technological innovations Sports -- Technological innovations Cell phones -- Health aspects
- Language: English
- Type: Thesis , Masters , MIT
- Identifier: http://hdl.handle.net/10948/32099 , vital:31958
- Description: The sporting industry has seen incredible advancements with the use of information technology. Technology is used in the sporting industry for training, coaching and even as a deciding factor of a game result. There are certain sports which require individuals to venture into isolated environments, these sports have been termed adventure or extreme sports. Due to the extreme environmental factors that can occur with adventure sport, it is possible for an individual to experience an emergency situation. Emergency situations can occur at any time, and this is especially true in adventure sport. Adventure sport such as ocean and river kayaking require individuals to venture into isolated environments, where if an emergency situation occurs could result in an individual left stranded waiting for emergency rescue. Adventure sport participants and Event Organizers are aware of the dangers associated with this type of adventure sport, but there is currently no requirement to have a mobile technology device present during kayaking events. The main purpose of this dissertation was to evaluate the current use of mobile technology in adventure sport in the Eastern Cape province of South Africa. To accomplish this two literature reviews were conducted which identi_ed information on the two main themes which are adventure sport and mobile technology. To produce information from the ocean and river kayaking community an online questionnaire was distributed to several kayaking clubs in the Eastern Cape province of South Africa. This dissertation also presents a framework that proposes the use of mobile technology hardware and software by participants and event organisers in an attempt to increase the safety of events in this form of adventure sport. It is hoped that the framework for using mobile technology to increase the safety of adventure sport proposed in this research, may provide clear guidance for the achievement of a safer sporting experience for the participants of ocean and river kayaking.
- Full Text:
- Date Issued: 2018
The machinability of rapidly solidified aluminium alloy for optical mould inserts
- Authors: Otieno, Timothy
- Date: 2018
- Subjects: Aluminum alloys , Automobiles -- Materials Materials -- Mechanical properties
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/23097 , vital:30415
- Description: Ultra-high precision machining is a material removing process under the nanotechnology regime whereby the highest dimensional accuracies are attained. Critical components for optical devices and optical measuring systems are mainly produced through ultra-high precision machining. Their mass production is usually implemented by utilising optical moulds. Aluminium alloys have proven to be advantageous and very commonly used in the photonics industry for moulds. This ever-increasing use and demand within optics have led to the development of newly modified grades of aluminium alloys produced by rapid solidification in the foundry process. The newer grades are characterised by finer microstructures and improved mechanical and physical properties. The main inconvenience in their usage currently lies in their very limited machining database. This research investigates the machinability of rapidly solidified aluminium, RSA 905, under varying cutting conditions in single point diamond turning. The machining parameters varied were cutting speed, feed rate and depth of cut. The resulting surface roughness of the workpiece and wear of the diamond tool were measured at various intervals. Acoustic emissions and cutting force were also monitored during machining. The results were statistically analysed and accurate predictive models were developed. Generally, very low tool wear, within 3 to 5 μm, and very low surface roughness, within 3 to 8 nm, was obtained. Acoustic emissions recorded were in the range of 0.06 to 0.13 V and cutting forces were in the range of 0.08 to 0.94 N. The trends of the monitored acoustic emissions and cutting force showed to have a linked representation of the tool wear and surface roughness results. Contour maps were generated to identify zones where the cutting parameters produced the best results. In addition, a range of machining parameters were presented for optimum quality where surface roughness and tool wear can be minimised. As the machining is of a nanometric scale, a molecular dynamics approach was applied to investigate the underlying mechanisms at atom level. The nanomachining simulations were found to have a correlation to the actual machining results and microstructural nature of the alloy. This research proves that rapidly solidified aluminium is a superior alternative to traditional aluminium alloys and provides a good reference with room for flexibility that machinists can apply when using rapidly solidified aluminium alloys. Efficiency could be improved by reducing the required machining interruption through effective monitoring and performance could be improved by maintaining quality and extending tool life through parameter selection.
- Full Text:
- Date Issued: 2018
- Authors: Otieno, Timothy
- Date: 2018
- Subjects: Aluminum alloys , Automobiles -- Materials Materials -- Mechanical properties
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/23097 , vital:30415
- Description: Ultra-high precision machining is a material removing process under the nanotechnology regime whereby the highest dimensional accuracies are attained. Critical components for optical devices and optical measuring systems are mainly produced through ultra-high precision machining. Their mass production is usually implemented by utilising optical moulds. Aluminium alloys have proven to be advantageous and very commonly used in the photonics industry for moulds. This ever-increasing use and demand within optics have led to the development of newly modified grades of aluminium alloys produced by rapid solidification in the foundry process. The newer grades are characterised by finer microstructures and improved mechanical and physical properties. The main inconvenience in their usage currently lies in their very limited machining database. This research investigates the machinability of rapidly solidified aluminium, RSA 905, under varying cutting conditions in single point diamond turning. The machining parameters varied were cutting speed, feed rate and depth of cut. The resulting surface roughness of the workpiece and wear of the diamond tool were measured at various intervals. Acoustic emissions and cutting force were also monitored during machining. The results were statistically analysed and accurate predictive models were developed. Generally, very low tool wear, within 3 to 5 μm, and very low surface roughness, within 3 to 8 nm, was obtained. Acoustic emissions recorded were in the range of 0.06 to 0.13 V and cutting forces were in the range of 0.08 to 0.94 N. The trends of the monitored acoustic emissions and cutting force showed to have a linked representation of the tool wear and surface roughness results. Contour maps were generated to identify zones where the cutting parameters produced the best results. In addition, a range of machining parameters were presented for optimum quality where surface roughness and tool wear can be minimised. As the machining is of a nanometric scale, a molecular dynamics approach was applied to investigate the underlying mechanisms at atom level. The nanomachining simulations were found to have a correlation to the actual machining results and microstructural nature of the alloy. This research proves that rapidly solidified aluminium is a superior alternative to traditional aluminium alloys and provides a good reference with room for flexibility that machinists can apply when using rapidly solidified aluminium alloys. Efficiency could be improved by reducing the required machining interruption through effective monitoring and performance could be improved by maintaining quality and extending tool life through parameter selection.
- Full Text:
- Date Issued: 2018
The impact of project performance on the image of the construction industry in Botswana
- Authors: Ndadi, Thabo Enert
- Date: 2018
- Subjects: Project management -- Botswana , Construction industry -- Botswana Construction industry -- Management
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/32826 , vital:32367
- Description: The construction industry is one of the largest sectors in the economy of Botswana, and contributes significantly to the socio-economic development of the country, averaging 6.7 per cent of the country’s gross domestic product (GDP). Botswana operates a free enterprise system where anyone is free to participate, which is supported by the existence of multi-national construction firms operating in the country. The construction industry in Botswana consists of various role players. As a developing country, Botswana’s construction industry is facing challenges of poor project implementation. The performance of the construction industry has not escaped the public‘s scrutiny of commercial construction and social development projects, resulting in negative perceptions with respect to the sector. This study focuses on the impact of project performance on the image of the construction industry in Botswana, and was conducted on projects underway. When public opinion is formed, a certain image of the business results, therefore the investigation endeavoured to establish the sources of negative perceptions towards the construction industry. To realise the aforementioned study objectives, an exploratory design sequence method was adopted henceforth applying established and tested quantitative and qualitative systems. A questionnaire was formulated and established to obtain the empirical data on randomly selected projects that were on-going or completed in the past ten years .These included public sector projects, private sector and those undertaken by parastatal organisation. The sample stratum deemed representative picture of the population, included various construction industry stakeholders. To facilitate for an effective data to inform the study, the questionnaire was categorised in three key areas of, biographic data, demographic and the industry best practice perceptions. The study determined that the capability of firms is influenced by construction management skills, and established regulatory systems. These can determine the extent to which the construction industry delivers the project within the business environment that is guided by the micro, macro and market parameters. As evidenced in the findings, the Botswana construction industry faces a skills’ gap and therefore is reliant on imported labour, and many international firms operating in the country affirm this observation. The study also addressed the existing regulatory systems, and the effectiveness of institutions. The study concludes that the existing performance regulatory systems are not adequate or they are ineffectively controlled; industry role players’ behaviour is irresponsible; there is limited skills’ capacity, and political interference accompanies project implementation. While the deterioration in the construction industry can be attributed to imported culture, it is noted that multi-national corporations (MNCs) and other foreign firms can be conduits for technology and knowledge (T&K) transfer to host countries in the developing world. Botswana with its free enterprise market and limited skill capacity and informed by the behaviour of construction industry role players, there is need for a structured integrity restoration process from both regulator and the operators. There is further need for a specific sector regulatory instrument (Act) to regulate the safety, health, and environmental operations in the construction industry. The construction industry also need to support research and development of the industry to be competitive both local and international.
- Full Text:
- Date Issued: 2018
- Authors: Ndadi, Thabo Enert
- Date: 2018
- Subjects: Project management -- Botswana , Construction industry -- Botswana Construction industry -- Management
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/32826 , vital:32367
- Description: The construction industry is one of the largest sectors in the economy of Botswana, and contributes significantly to the socio-economic development of the country, averaging 6.7 per cent of the country’s gross domestic product (GDP). Botswana operates a free enterprise system where anyone is free to participate, which is supported by the existence of multi-national construction firms operating in the country. The construction industry in Botswana consists of various role players. As a developing country, Botswana’s construction industry is facing challenges of poor project implementation. The performance of the construction industry has not escaped the public‘s scrutiny of commercial construction and social development projects, resulting in negative perceptions with respect to the sector. This study focuses on the impact of project performance on the image of the construction industry in Botswana, and was conducted on projects underway. When public opinion is formed, a certain image of the business results, therefore the investigation endeavoured to establish the sources of negative perceptions towards the construction industry. To realise the aforementioned study objectives, an exploratory design sequence method was adopted henceforth applying established and tested quantitative and qualitative systems. A questionnaire was formulated and established to obtain the empirical data on randomly selected projects that were on-going or completed in the past ten years .These included public sector projects, private sector and those undertaken by parastatal organisation. The sample stratum deemed representative picture of the population, included various construction industry stakeholders. To facilitate for an effective data to inform the study, the questionnaire was categorised in three key areas of, biographic data, demographic and the industry best practice perceptions. The study determined that the capability of firms is influenced by construction management skills, and established regulatory systems. These can determine the extent to which the construction industry delivers the project within the business environment that is guided by the micro, macro and market parameters. As evidenced in the findings, the Botswana construction industry faces a skills’ gap and therefore is reliant on imported labour, and many international firms operating in the country affirm this observation. The study also addressed the existing regulatory systems, and the effectiveness of institutions. The study concludes that the existing performance regulatory systems are not adequate or they are ineffectively controlled; industry role players’ behaviour is irresponsible; there is limited skills’ capacity, and political interference accompanies project implementation. While the deterioration in the construction industry can be attributed to imported culture, it is noted that multi-national corporations (MNCs) and other foreign firms can be conduits for technology and knowledge (T&K) transfer to host countries in the developing world. Botswana with its free enterprise market and limited skill capacity and informed by the behaviour of construction industry role players, there is need for a structured integrity restoration process from both regulator and the operators. There is further need for a specific sector regulatory instrument (Act) to regulate the safety, health, and environmental operations in the construction industry. The construction industry also need to support research and development of the industry to be competitive both local and international.
- Full Text:
- Date Issued: 2018
The role of psychosocial recuperative therapy in enhancing construction performance on projects
- Authors: Obiozo, Rita Ngozi
- Date: 2018
- Subjects: Building -- Psychological aspects , Construction industry -- Accidents Building -- Economic aspects Feng shui
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/23080 , vital:30414
- Description: Research findings indicate that recent improvements in construction management initiatives have not substantially reduced the incidence of fatal occurrences and accidents in construction due to negligence and error. Some of the traumatic and causative factors include the dissipation of vital energy, health, safety, and wellbeing in the construction workforce due to the lack of contact with nature on construction sites, combined with the exhaustive nature of the work, and multiple stress factors in construction. The resultant effect is visible in the form of increased rework, disputes, and socio-psycho-traumatic factors that result in a reduction in profit margins due to the daily repetition of health and safety (H&S) hazards and quality errors. To address these issues there is a need for the exploration of the inherent potential to achieve exceptional environmental credentials on construction worksites attributable to the biophilic design concept of the intelligent construction workplace. This would involve the introduction of a biophilic construction site model (BCSM) that has the potential of establishing the continuous flow of natural energy that would replenish the vital life force and impact on the improvement of the performance of the construction workforce and management throughout the life cycle of the construction process. The objective of the initiative involves the introduction of dynamic harmonious energy in consonance with the theory of biophilia and feng shui principles of wellness interventions, which would introduce and enhance the flow of natural energy relative to the greening of construction sites in aid of H&S, wellbeing and human factors for ergonomics in construction. The methodology adopted, involved a survey of the related literature, and the triangulation and longitudinal assessment of multiple case studies of viable construction sites in progress. The applied technique included a greening construction site survey, interviews, observations, photo elicitation, questionnaire surveys, and a focus group study conducted with the construction workforce during the construction process. Findings indicate a potential increase in the level of sustainable behaviour in construction that impacts on the enhanced concentration and level of focus of the workforce, as well as a reduction in H&S and quality errors that militate against consistent improvement of the construction process. These efforts add value and novelty to the construction management body of knowledge (CMBOK) with regards to the green building construction and sustainable sites initiative. Research findings established the ‘greening of the construction site / biophilic construction site model (BCSM)’ as a cost-effective strategy towards the healing of the ‘sick construction site syndrome’ and the psychosocial recuperative and rejunative therapy for the workforce in construction for productive performance. It is significant and notable that the empirical findings relative to the BCSM strategy were found to substantiate effectively as the missing link in the establishment and reconstitution of Maslow’s hierarchy of needs, which according to research findings, is currently conceptual. The recommendations include the suggestions for the ‘informal dynamic rock garden design’ as suitable for the BCSM with the inclusion of ‘plants as a primary indicator’ in construction site premises, site offices, material sheds, welfare facilities including ‘lunch break retreats and outdoor shelters’. The recommendation of the BCSM strategy for the construction site is aimed towards the onset of construction as opposed to the conclusion of works / external works at the end of the project as is currently practiced. For effective application, the empirical findings relative to the study recommend that the procurement of the BCSM as a ‘silent and indispensable team mate’ should commence from the conceptual design, pre-bid / tender stages, to the fiscal planning and setting out of worksites, as well as its inclusion in the ‘curriculum of studies’ for the instruction of emerging construction management practitioners. In furtherance of the CMBOK and the enhancement of the BCSM strategy and the ‘humanistic value of the intelligent construction worksite’, the study recommends that the concept of ‘frozen music’ be addressed in future research relative to the ‘biophilic design concept’ to determine its role in enhancing cost effective performance, H&S, ergonomics, and the health and wellbeing of workers in construction.
- Full Text:
- Date Issued: 2018
- Authors: Obiozo, Rita Ngozi
- Date: 2018
- Subjects: Building -- Psychological aspects , Construction industry -- Accidents Building -- Economic aspects Feng shui
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/23080 , vital:30414
- Description: Research findings indicate that recent improvements in construction management initiatives have not substantially reduced the incidence of fatal occurrences and accidents in construction due to negligence and error. Some of the traumatic and causative factors include the dissipation of vital energy, health, safety, and wellbeing in the construction workforce due to the lack of contact with nature on construction sites, combined with the exhaustive nature of the work, and multiple stress factors in construction. The resultant effect is visible in the form of increased rework, disputes, and socio-psycho-traumatic factors that result in a reduction in profit margins due to the daily repetition of health and safety (H&S) hazards and quality errors. To address these issues there is a need for the exploration of the inherent potential to achieve exceptional environmental credentials on construction worksites attributable to the biophilic design concept of the intelligent construction workplace. This would involve the introduction of a biophilic construction site model (BCSM) that has the potential of establishing the continuous flow of natural energy that would replenish the vital life force and impact on the improvement of the performance of the construction workforce and management throughout the life cycle of the construction process. The objective of the initiative involves the introduction of dynamic harmonious energy in consonance with the theory of biophilia and feng shui principles of wellness interventions, which would introduce and enhance the flow of natural energy relative to the greening of construction sites in aid of H&S, wellbeing and human factors for ergonomics in construction. The methodology adopted, involved a survey of the related literature, and the triangulation and longitudinal assessment of multiple case studies of viable construction sites in progress. The applied technique included a greening construction site survey, interviews, observations, photo elicitation, questionnaire surveys, and a focus group study conducted with the construction workforce during the construction process. Findings indicate a potential increase in the level of sustainable behaviour in construction that impacts on the enhanced concentration and level of focus of the workforce, as well as a reduction in H&S and quality errors that militate against consistent improvement of the construction process. These efforts add value and novelty to the construction management body of knowledge (CMBOK) with regards to the green building construction and sustainable sites initiative. Research findings established the ‘greening of the construction site / biophilic construction site model (BCSM)’ as a cost-effective strategy towards the healing of the ‘sick construction site syndrome’ and the psychosocial recuperative and rejunative therapy for the workforce in construction for productive performance. It is significant and notable that the empirical findings relative to the BCSM strategy were found to substantiate effectively as the missing link in the establishment and reconstitution of Maslow’s hierarchy of needs, which according to research findings, is currently conceptual. The recommendations include the suggestions for the ‘informal dynamic rock garden design’ as suitable for the BCSM with the inclusion of ‘plants as a primary indicator’ in construction site premises, site offices, material sheds, welfare facilities including ‘lunch break retreats and outdoor shelters’. The recommendation of the BCSM strategy for the construction site is aimed towards the onset of construction as opposed to the conclusion of works / external works at the end of the project as is currently practiced. For effective application, the empirical findings relative to the study recommend that the procurement of the BCSM as a ‘silent and indispensable team mate’ should commence from the conceptual design, pre-bid / tender stages, to the fiscal planning and setting out of worksites, as well as its inclusion in the ‘curriculum of studies’ for the instruction of emerging construction management practitioners. In furtherance of the CMBOK and the enhancement of the BCSM strategy and the ‘humanistic value of the intelligent construction worksite’, the study recommends that the concept of ‘frozen music’ be addressed in future research relative to the ‘biophilic design concept’ to determine its role in enhancing cost effective performance, H&S, ergonomics, and the health and wellbeing of workers in construction.
- Full Text:
- Date Issued: 2018
Facilities management awareness amongst high school learners and teachers in the Soutpansberg west circuit in the Limpopo province
- Authors: Nephawe, Tshilidzi
- Date: 2018
- Subjects: Facility management -- South Africa -- Limpopo , Facility management -- Research Construction industry -- Forecasting -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/32894 , vital:32395
- Description: The Facilities Management (FM) profession in South Africa needs to start recognising and acknowledging the importance of formal education amongst the population. The question of FM being a career normally receives shallow responses; and it sometimes leads to a contradiction. The FM profession seems to be taking an ‘as it is’ approach, when it comes to the establishment of an education agenda; since there is no clear evidence regarding alignment and transition from high school to tertiary level, and then to the workplace. The level of awareness plays a significant role in all elements of FM practice. Even at the present moment, FM is still not a career of choice, meaning that anyone can be a facilities manager. There are parts of South Africa where the population is unaware of FM. Some had never heard about it at all. It was important to establish the level of awareness: with the intention of developing a critical awareness of FM as a career path amongst high school learners and teachers in the Soutpansberg West Circuit, in order to inform them of a possible career choice in FM. In this study, a mixed-model research methodology was used, which combines both qualitative and quantitative research approaches. A population was identified from which a sample of 14 high schools, 87 high school teachers and 2 299 high school learners was drawn. A ‘fit for purpose’ questionnaire was distributed to the participants. The data were collected by means of a survey. It focused on a survey; and it used a questionnaire that was composed of multiple closed-ended or quantitative-type items, as well as several open-ended or qualitative-type items. Thematic analysis was used for the open-ended questions. This study has successfully managed to determine the awareness levels of high school learners and teachers relating to FM, the need for FM awareness in high schools; and whether there were high school learners who wished to become facilities managers in the future. FM companies, tertiary institutions, and high schools must collaborate in the development of the FM career-guidance programme, in order to increase awareness amongst the teachers and learners. There were students who indicated that they were interested in FM as their career of choice.
- Full Text:
- Date Issued: 2018
- Authors: Nephawe, Tshilidzi
- Date: 2018
- Subjects: Facility management -- South Africa -- Limpopo , Facility management -- Research Construction industry -- Forecasting -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/32894 , vital:32395
- Description: The Facilities Management (FM) profession in South Africa needs to start recognising and acknowledging the importance of formal education amongst the population. The question of FM being a career normally receives shallow responses; and it sometimes leads to a contradiction. The FM profession seems to be taking an ‘as it is’ approach, when it comes to the establishment of an education agenda; since there is no clear evidence regarding alignment and transition from high school to tertiary level, and then to the workplace. The level of awareness plays a significant role in all elements of FM practice. Even at the present moment, FM is still not a career of choice, meaning that anyone can be a facilities manager. There are parts of South Africa where the population is unaware of FM. Some had never heard about it at all. It was important to establish the level of awareness: with the intention of developing a critical awareness of FM as a career path amongst high school learners and teachers in the Soutpansberg West Circuit, in order to inform them of a possible career choice in FM. In this study, a mixed-model research methodology was used, which combines both qualitative and quantitative research approaches. A population was identified from which a sample of 14 high schools, 87 high school teachers and 2 299 high school learners was drawn. A ‘fit for purpose’ questionnaire was distributed to the participants. The data were collected by means of a survey. It focused on a survey; and it used a questionnaire that was composed of multiple closed-ended or quantitative-type items, as well as several open-ended or qualitative-type items. Thematic analysis was used for the open-ended questions. This study has successfully managed to determine the awareness levels of high school learners and teachers relating to FM, the need for FM awareness in high schools; and whether there were high school learners who wished to become facilities managers in the future. FM companies, tertiary institutions, and high schools must collaborate in the development of the FM career-guidance programme, in order to increase awareness amongst the teachers and learners. There were students who indicated that they were interested in FM as their career of choice.
- Full Text:
- Date Issued: 2018
Mitigation of single event upsets in a XILINX ARTIX-7 field programmable gate array
- Authors: Omolo, Joshua
- Date: 2018
- Subjects: Field programmable gate arrays -- Design and construction Prototypes, Engineering
- Language: English
- Type: Thesis , Masters , MEng
- Identifier: http://hdl.handle.net/10948/22310 , vital:29942
- Description: Field programmable gate arrays are increasingly being used in harsh environments like space where high energy particles from radiation affect the integrity of the data. Before deployment of satellites in space, characterisation and consequently mitigation of radiation effects is necessary to avoid failure. By irradiating a digital microelectronic device, using accelerated energetic particles, it is possible to predict the likelihood of an event effect happening. Such irradiation tests can only be done at a particle accelerator facility such as iThemba LABS in Cape Town. It is the one of the few particle accelerators in the southern hemisphere and offers the capacity to perform these event effect characterisation tests. Triple Modular Redundancy (TMR) is a commonly used mitigation technique in microelectronics. Although effective, it has the downside of increased resource area. A DMR-Filter combination mitigation technique was developed at the Nelson Mandela University. It uses fewer resources than TMR and it is envisaged to significantly reduce event upsets in a FPGA. This research project seeks to investigate the effectiveness of the DMR-Filter combination mitigation technique in reducing the likelihood of event upsets occurring in Xilinx’s Artix-7 FPGA when exposed to highly accelerated particles, similar to those in space.
- Full Text:
- Date Issued: 2018
- Authors: Omolo, Joshua
- Date: 2018
- Subjects: Field programmable gate arrays -- Design and construction Prototypes, Engineering
- Language: English
- Type: Thesis , Masters , MEng
- Identifier: http://hdl.handle.net/10948/22310 , vital:29942
- Description: Field programmable gate arrays are increasingly being used in harsh environments like space where high energy particles from radiation affect the integrity of the data. Before deployment of satellites in space, characterisation and consequently mitigation of radiation effects is necessary to avoid failure. By irradiating a digital microelectronic device, using accelerated energetic particles, it is possible to predict the likelihood of an event effect happening. Such irradiation tests can only be done at a particle accelerator facility such as iThemba LABS in Cape Town. It is the one of the few particle accelerators in the southern hemisphere and offers the capacity to perform these event effect characterisation tests. Triple Modular Redundancy (TMR) is a commonly used mitigation technique in microelectronics. Although effective, it has the downside of increased resource area. A DMR-Filter combination mitigation technique was developed at the Nelson Mandela University. It uses fewer resources than TMR and it is envisaged to significantly reduce event upsets in a FPGA. This research project seeks to investigate the effectiveness of the DMR-Filter combination mitigation technique in reducing the likelihood of event upsets occurring in Xilinx’s Artix-7 FPGA when exposed to highly accelerated particles, similar to those in space.
- Full Text:
- Date Issued: 2018
Users’ perceptions regarding password policies
- Authors: Fredericks, Damian Todd
- Date: 2018
- Subjects: Computers -- Access control , Computer networks -- Security measures Computer security
- Language: English
- Type: Thesis , Masters , MIT
- Identifier: http://hdl.handle.net/10948/30205 , vital:30896
- Description: Information is considered a valuable asset to most organisations and is often exposed to various threats which exploit its confidentiality, integrity and availability (CIA). Identification and Authentication are commonly used to help ensure the CIA of information. This research study specifically focused on password-based authentication. Passwords are used to log into personal computers, company computers, email accounts, bank accounts and various software systems and mobile applications. Passwords act like a protective barrier between a user and their personal and company information, and remain the most cost-effective and most efficient method to control access to computer systems. An extensive content analysis was conducted regarding the security of passwords, as well as users’ password management coping strategies. It was determined that very little research has been conducted in relation to users’ perceptions towards password policies. The problem identified by this research is that organisations often implement password policy guidelines without taking into consideration users’ perceptions regarding such guidelines. This could result in users adopting various password management coping strategies. This research therefore aimed to determine users’ perceptions with regard to current password-related standards and best practices (password policy guidelines). Standards and best practices such as ISO/IEC 27002 (2013), NIST SP 800-118 (2009), NIST SP 800-63-2 (2013), NIST SP 800-63B (2016) and the SANS Password Protection Policy (2014b) were studied in order to determine the common elements of password policies. This research argued that before organisations implement password policy guidelines, they need to determine users’ perceptions towards such guidelines. It was identified that certain human factors such as human memory, attitude and apathy often cause users to adopt insecure coping strategies such as Reusing Passwords, Writing Down Passwords and Not Changing Passwords. This research included a survey which took the form of a questionnaire. The aim of the survey was to determine users’ perceptions towards common elements of password policies and to determine the coping strategies users commonly adopt. The survey included questions related to the new NIST SP 800-63B (2016) that sought to determine users’ perceptions towards these new NIST password policy iii guidelines. Findings from the survey indicated that respondents found the new NIST guidelines to be helpful, secure and easier to adhere to. Finally, recommendations regarding password policies were presented based on the common elements of password policies and users’ perceptions of the new NIST password guidelines. These recommendations could help policy makers in the implementation of new password policies or the revision of current password policies.
- Full Text:
- Date Issued: 2018
- Authors: Fredericks, Damian Todd
- Date: 2018
- Subjects: Computers -- Access control , Computer networks -- Security measures Computer security
- Language: English
- Type: Thesis , Masters , MIT
- Identifier: http://hdl.handle.net/10948/30205 , vital:30896
- Description: Information is considered a valuable asset to most organisations and is often exposed to various threats which exploit its confidentiality, integrity and availability (CIA). Identification and Authentication are commonly used to help ensure the CIA of information. This research study specifically focused on password-based authentication. Passwords are used to log into personal computers, company computers, email accounts, bank accounts and various software systems and mobile applications. Passwords act like a protective barrier between a user and their personal and company information, and remain the most cost-effective and most efficient method to control access to computer systems. An extensive content analysis was conducted regarding the security of passwords, as well as users’ password management coping strategies. It was determined that very little research has been conducted in relation to users’ perceptions towards password policies. The problem identified by this research is that organisations often implement password policy guidelines without taking into consideration users’ perceptions regarding such guidelines. This could result in users adopting various password management coping strategies. This research therefore aimed to determine users’ perceptions with regard to current password-related standards and best practices (password policy guidelines). Standards and best practices such as ISO/IEC 27002 (2013), NIST SP 800-118 (2009), NIST SP 800-63-2 (2013), NIST SP 800-63B (2016) and the SANS Password Protection Policy (2014b) were studied in order to determine the common elements of password policies. This research argued that before organisations implement password policy guidelines, they need to determine users’ perceptions towards such guidelines. It was identified that certain human factors such as human memory, attitude and apathy often cause users to adopt insecure coping strategies such as Reusing Passwords, Writing Down Passwords and Not Changing Passwords. This research included a survey which took the form of a questionnaire. The aim of the survey was to determine users’ perceptions towards common elements of password policies and to determine the coping strategies users commonly adopt. The survey included questions related to the new NIST SP 800-63B (2016) that sought to determine users’ perceptions towards these new NIST password policy iii guidelines. Findings from the survey indicated that respondents found the new NIST guidelines to be helpful, secure and easier to adhere to. Finally, recommendations regarding password policies were presented based on the common elements of password policies and users’ perceptions of the new NIST password guidelines. These recommendations could help policy makers in the implementation of new password policies or the revision of current password policies.
- Full Text:
- Date Issued: 2018
Ineffective quality management on civil engineering projects
- Authors: Kruger, Casper Stephanus
- Date: 2018
- Subjects: Total quality management , Quality management -- South Africa Civil engineering -- South Africa Construction industry -- South Africa -- Management Project management -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/30984 , vital:31243
- Description: Quality is a fundamental expectancy in the construction industry. Together with cost and time, it is one of the basic and most important performance indicators in construction projects. The non-achievement of such a crucial aspect of construction can result in construction failures and client dissatisfaction (Zunguzane et al., 2012: 20). The increased pressure on project stakeholders to produce projects that achieve these aspects can become unrealistic, which in turn can contribute to the development of disputes within the construction sector (Love et al., 2010a: 405). Civil engineering project stakeholders employ Quality Management Systems as a tool to increase industry quality performance. The effective implementation of these systems contribute to the mitigation and elimination of rework/non-conformances while enhancing client satisfaction and increasing the project performance concerning cost, quality and time (Bello et al., 2010: 9). The main objectives of this study were to determine whether quality management is implemented effectively on civil engineering projects in order prevent claims against consulting engineers and to further investigate the barriers that impact quality management on civil engineering projects. In addition, the research aimed to determine what impact, if any, the aspects of public sector procurement policy, implementation and management have on the ability of civil engineering stakeholders to manage quality during the design, procurement and construction phases of a project. The study therefore focussed on quality management in the civil engineering industry and investigated the barriers that contribute to ineffective quality management on civil engineering projects under design, procurement and construction related barriers. This study was done in two parts. Firstly, the research adopted a quantitative research approach with a descriptive research strategy. The second part entailed an in-depth study of the current existing theory by means of a literature review. Data was collected via a questionnaire survey and analysed to test the three hypotheses and answer questions relating to the current status of the subject of inquiry. iv The findings of the research confirmed the challenges and frustrations experienced during the procurement implementation activities of public sector clients. The results confirmed that the appointment of incompetent and unqualified civil engineering contractors has a direct impact on the quality of civil engineering projects and the effective implementation of quality management systems.
- Full Text:
- Date Issued: 2018
- Authors: Kruger, Casper Stephanus
- Date: 2018
- Subjects: Total quality management , Quality management -- South Africa Civil engineering -- South Africa Construction industry -- South Africa -- Management Project management -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/30984 , vital:31243
- Description: Quality is a fundamental expectancy in the construction industry. Together with cost and time, it is one of the basic and most important performance indicators in construction projects. The non-achievement of such a crucial aspect of construction can result in construction failures and client dissatisfaction (Zunguzane et al., 2012: 20). The increased pressure on project stakeholders to produce projects that achieve these aspects can become unrealistic, which in turn can contribute to the development of disputes within the construction sector (Love et al., 2010a: 405). Civil engineering project stakeholders employ Quality Management Systems as a tool to increase industry quality performance. The effective implementation of these systems contribute to the mitigation and elimination of rework/non-conformances while enhancing client satisfaction and increasing the project performance concerning cost, quality and time (Bello et al., 2010: 9). The main objectives of this study were to determine whether quality management is implemented effectively on civil engineering projects in order prevent claims against consulting engineers and to further investigate the barriers that impact quality management on civil engineering projects. In addition, the research aimed to determine what impact, if any, the aspects of public sector procurement policy, implementation and management have on the ability of civil engineering stakeholders to manage quality during the design, procurement and construction phases of a project. The study therefore focussed on quality management in the civil engineering industry and investigated the barriers that contribute to ineffective quality management on civil engineering projects under design, procurement and construction related barriers. This study was done in two parts. Firstly, the research adopted a quantitative research approach with a descriptive research strategy. The second part entailed an in-depth study of the current existing theory by means of a literature review. Data was collected via a questionnaire survey and analysed to test the three hypotheses and answer questions relating to the current status of the subject of inquiry. iv The findings of the research confirmed the challenges and frustrations experienced during the procurement implementation activities of public sector clients. The results confirmed that the appointment of incompetent and unqualified civil engineering contractors has a direct impact on the quality of civil engineering projects and the effective implementation of quality management systems.
- Full Text:
- Date Issued: 2018
A framework for improving construction workers’ health and safety practices in Lagos, Nigeria
- Authors: Kukoyi, Patricia Omega
- Date: 2018
- Subjects: Construction industry -- Health aspects -- Lagos -- Nigeria , Industrial safety -- Lagos -- Nigeria Sustainable construction -- Lagos -- Nigeria
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/30962 , vital:31235
- Description: The construction sector is known for its poor health and safety (H&S) record. This situation contributes to the poor performance of construction projects and poor worker productivity. In view of this, the research was undertaken to improve workers’ H&S practices. This study determined how the systems thinking approach will mitigate unhealthy and unsafe construction practices in Lagos, Nigeria by developing interventions, and proposing a model for improved H&S practices. The study utilised a mixed research method approach. Both quantitative and qualitative methods were used specifically the concurrent embedded method to obtain and analyse the data. The sample size for the quantitative study was 375 respondents and a total of 40 respondents were engaged in the qualitative study. The sample consisted of designers, contractors, clients, quantity surveyors, project managers, construction managers, supervisors, and construction workers (masons, carpenters, painters, roofers, electricians) based in Lagos, Nigeria. The findings reveal that there is inadequate consideration for H&S during the procurement of construction projects. Furthermore, the absence of H&S regulations relating to the construction sector was observed. Unsafe practices at construction sites in Nigeria can be attributed to this discovery. The study reveals that the regulatory system, the organisation, the individual and the work environment all have an impact on H&S work practices. Although the contractors are mainly responsible for H&S at construction sites, other construction stakeholders (such as clients, consultants, etc.) influence H&S practices. The findings highlight the need for the adoption of a holistic approach to facilitate improvement in H&S practices on construction sites. The research has contributed to the body of knowledge by developing a framework for improving workers’ H&S performance on construction sites.
- Full Text:
- Date Issued: 2018
- Authors: Kukoyi, Patricia Omega
- Date: 2018
- Subjects: Construction industry -- Health aspects -- Lagos -- Nigeria , Industrial safety -- Lagos -- Nigeria Sustainable construction -- Lagos -- Nigeria
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/30962 , vital:31235
- Description: The construction sector is known for its poor health and safety (H&S) record. This situation contributes to the poor performance of construction projects and poor worker productivity. In view of this, the research was undertaken to improve workers’ H&S practices. This study determined how the systems thinking approach will mitigate unhealthy and unsafe construction practices in Lagos, Nigeria by developing interventions, and proposing a model for improved H&S practices. The study utilised a mixed research method approach. Both quantitative and qualitative methods were used specifically the concurrent embedded method to obtain and analyse the data. The sample size for the quantitative study was 375 respondents and a total of 40 respondents were engaged in the qualitative study. The sample consisted of designers, contractors, clients, quantity surveyors, project managers, construction managers, supervisors, and construction workers (masons, carpenters, painters, roofers, electricians) based in Lagos, Nigeria. The findings reveal that there is inadequate consideration for H&S during the procurement of construction projects. Furthermore, the absence of H&S regulations relating to the construction sector was observed. Unsafe practices at construction sites in Nigeria can be attributed to this discovery. The study reveals that the regulatory system, the organisation, the individual and the work environment all have an impact on H&S work practices. Although the contractors are mainly responsible for H&S at construction sites, other construction stakeholders (such as clients, consultants, etc.) influence H&S practices. The findings highlight the need for the adoption of a holistic approach to facilitate improvement in H&S practices on construction sites. The research has contributed to the body of knowledge by developing a framework for improving workers’ H&S performance on construction sites.
- Full Text:
- Date Issued: 2018
Factors that impact on the user experience of a mobile school health application
- Authors: Chetty, Avineshin
- Date: 2018
- Subjects: Wireless communication systems in medical care , Medical informatics Application software Technology -- Psychological aspects
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/21801 , vital:29780
- Description: In South Africa, the National Department of Health through its Integrated School Health Policy, use school nurses, to visit schools and perform health screening of learners which focus mainly on nutrition, eyesight and hearing. To date, this was done manually, but with the advance of technology, there is a need to investigate the use of for example, mobile applications to assist with health screening tasks. As part of the TECH4RED project in the Chris Hani district, a mobile school health assessment application was implemented and used over a period three years. As this is a new way of conducting the health screening, there is a need to understand the user experiences of the end users who interact with both the technology and the application. The objective of this study was to investigate the perceived factors that impact on the UX of the school health assessment application. The research aimed to understand the uses, advantages and disadvantages of mobile health applications. It also aimed at determining whether there are unique characteristics of the targeted end users and if so, whether such characteristics would affect the overall UX when using the application. Determining the levels of satisfaction and investigating the apparent challenges the users faced while interacting with the application provided some insights into underlying factors. A theoretical framework was constructed using existing literature. Using a case study approach, data was collected by means of end user satisfaction and user experience questionnaires. Additional data collection was done by means of an expert review to obtain feedback on the content and workflow of the school health assessment application. The resulting findings from the research included, a descriptive list of factors that impact the school health assessment application, as well as a subsequent list of recommendations for improvements. These key-findings could lead to possible guidelines, while additionally, providing valuable insight into mobile school health applications on the whole.
- Full Text:
- Date Issued: 2018
- Authors: Chetty, Avineshin
- Date: 2018
- Subjects: Wireless communication systems in medical care , Medical informatics Application software Technology -- Psychological aspects
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/21801 , vital:29780
- Description: In South Africa, the National Department of Health through its Integrated School Health Policy, use school nurses, to visit schools and perform health screening of learners which focus mainly on nutrition, eyesight and hearing. To date, this was done manually, but with the advance of technology, there is a need to investigate the use of for example, mobile applications to assist with health screening tasks. As part of the TECH4RED project in the Chris Hani district, a mobile school health assessment application was implemented and used over a period three years. As this is a new way of conducting the health screening, there is a need to understand the user experiences of the end users who interact with both the technology and the application. The objective of this study was to investigate the perceived factors that impact on the UX of the school health assessment application. The research aimed to understand the uses, advantages and disadvantages of mobile health applications. It also aimed at determining whether there are unique characteristics of the targeted end users and if so, whether such characteristics would affect the overall UX when using the application. Determining the levels of satisfaction and investigating the apparent challenges the users faced while interacting with the application provided some insights into underlying factors. A theoretical framework was constructed using existing literature. Using a case study approach, data was collected by means of end user satisfaction and user experience questionnaires. Additional data collection was done by means of an expert review to obtain feedback on the content and workflow of the school health assessment application. The resulting findings from the research included, a descriptive list of factors that impact the school health assessment application, as well as a subsequent list of recommendations for improvements. These key-findings could lead to possible guidelines, while additionally, providing valuable insight into mobile school health applications on the whole.
- Full Text:
- Date Issued: 2018