Improving the supply of subsidised housing in South Africa
- Authors: Bekker, Jakobus Petrus
- Date: 2017
- Subjects: Housing -- South Africa Housing subsidies -- South Africa , Low-income housing -- South Africa Public housing -- South Africa Housing development -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/19553 , vital:28893
- Description: Despite South African citizen’s constitutional right to adequate housing, Government’s housing delivery has been described as a complex, multi-stakeholder, multi-phase problem, exacerbated by political interference and corruption. Housing delivery in South Africa is ideologically and politically designed and executed. However, the government subsidised housing sector remains plagued by: huge and increasing backlogs; corruption; quality concerns, and recipient and stakeholder dissatisfaction. This includes the government subsidised housing construction sector, which faces issues such as: established contractors leaving the sector; late and failed completion; substandard quality; rework; cost overruns; late progress payments; and insolvencies. Moreover, government subsidised housing officials, which forms part of this sector, must contend with abandoned projects and appointing new contractors; shoddy workmanship from sub-standard contractors; remedial work, including demolition and rebuilding; and systemic problems such as staff shortages and under qualified staff. The process of Government’s ideological and political designed and execution may therefore not have considered certain practicalities relative to construction principles and practice. It therefore appears that there may be some relationship between the compatibility of Government’s housing ideological and political designed (policy) and execution and general construction principles and practice. It is clear from the related literature that government subsidised housing construction has mostly been investigated as an exercise observing from the outside in, and not from a construction sector perspective. The main purpose of this study is thus to explore housing policy and practice compatibility as a major obstacle to housing delivery in general and assess whether the current housing policy is sufficiently responsive to the requirements of the government subsidised housing sector by specifically describing and exploring the effects of Government’s housing procurement policies relative to the ability of the construction sector to supply government subsidised housing. More specifically, the study describes and explores corruption, quality; contractors and worker competency, and government capacity as specific consequences of housing policy and practice incompatibility, as well as factors contributing to recipient dissatisfaction and the housing backlog. Finally, based on the finding, a proposed framework for improving the supply of subsidised housing in South Africa has been developed. The methodology for this study adopted a post-positivist philosophy, embracing a quantitative approach using questionnaires, which incorporated mainly five-point Likert type scale, but also multiple-choice questions, as instruments for data collection. Three surveys were conducted, starting with a pilot study and followed by a primary study, during which a total of 2 884 potential participants within the construction sector across South Africa were randomly sampled and solicited to participate, of which 284 responded. The respondents consisted of four groups: general contractors (76); government housing officials (34); built environment professionals (137), and built environment suppliers (37). An electronic questionnaire was sent by email to all potential participants and allowed four weeks to complete the survey. Furthermore, a housing recipient survey was conducted among 100 randomly selected recipients of government subsidised housing in the Nelson Mandela Metropolitan area, by means of a structured interview using a paper based questionnaire, over a period of two weeks. The primary outcome measures used for this study were the ranked mean scores for mainly descriptive analysis and the Chi-square test, the 𝑡-test, Cohan’s d test, ANOVA and Scheffé test, using Cronbach's alpha as a measure of internal consistency of scale and validity, for inferential analyses and hypotheses testing. Hypothesis testing was founded upon Government’s worldview that its policies will not influence the operations of the construction sector relative to housing construction, and therefore tested respondents’ perspectives with respect to the impact that government policies have in terms of contractor operations and contractor success, as well as its contribution towards the housing backlog, substandard housing, recipient dissatisfaction and corruption. The following results were obtained by means of the hypothesis testing:Government housing procurement policies are inappropriate for application in the government subsidised housing sector. Respondents therefore disagree with the notion that government policy and practices do not impact contractor operations and contractor success, and thus the supply of houses; The application of government housing procurement policies leads to inadequate quality. Respondents therefore disagree with the notion that government preferential procurement policies do not impact quality; Government’s housing procurement policies inappropriately target emerging contractors. Respondents therefore disagree with the notion that Government’s targeting of emerging contractors does not impact housing supply; Government has inadequate capacity to address subsidised housing construction sector requirements in terms of housing projects. Respondents therefore disagree with the notion that Government has the capacity to address subsidised housing construction sector requirements in the supply of housing, and Government subsidised houses do not meet recipients’ expectations. Respondents therefore disagree with the notion that government subsidised houses do meet recipients’ expectations. It thus became apparent that housing supply is mostly inhibited by Government’s housing procurement policy, contributing to various factors, such as quality capability, contractor capability, systemic and administrative capacity, and resulting in recipient dissatisfaction. Using Pearson’s product moment correlation, a framework model was developed to illustrate the process flow, which revealed definitive statistical and practical relationships between these factors, and indeed reflects complex relationships between factors inhibiting supply and resulting in recipient dissatisfaction. To find an appropriate framework model for the purpose of improving housing supply, various sources were consulted. Based on the research question, together with the aims and objectives for this study, as well as the realisation that the problems associated with housing supply relate to the project management of the construction phase, which requires interventions for improving supply, it was decided that a results framework would be the most appropriate for this purpose. The proposed framework is therefore a graphical depiction of how the research process may be used to identify problems in the government subsidised housing sector, questioning how these may be resolved, setting strategies to improve the situation, evolving hypotheses and testing these hypotheses to establish the critical factors to be considered in the process of resolving the problem in the housing sector, by means of implementation and feedback.
- Full Text:
- Date Issued: 2017
- Authors: Bekker, Jakobus Petrus
- Date: 2017
- Subjects: Housing -- South Africa Housing subsidies -- South Africa , Low-income housing -- South Africa Public housing -- South Africa Housing development -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/19553 , vital:28893
- Description: Despite South African citizen’s constitutional right to adequate housing, Government’s housing delivery has been described as a complex, multi-stakeholder, multi-phase problem, exacerbated by political interference and corruption. Housing delivery in South Africa is ideologically and politically designed and executed. However, the government subsidised housing sector remains plagued by: huge and increasing backlogs; corruption; quality concerns, and recipient and stakeholder dissatisfaction. This includes the government subsidised housing construction sector, which faces issues such as: established contractors leaving the sector; late and failed completion; substandard quality; rework; cost overruns; late progress payments; and insolvencies. Moreover, government subsidised housing officials, which forms part of this sector, must contend with abandoned projects and appointing new contractors; shoddy workmanship from sub-standard contractors; remedial work, including demolition and rebuilding; and systemic problems such as staff shortages and under qualified staff. The process of Government’s ideological and political designed and execution may therefore not have considered certain practicalities relative to construction principles and practice. It therefore appears that there may be some relationship between the compatibility of Government’s housing ideological and political designed (policy) and execution and general construction principles and practice. It is clear from the related literature that government subsidised housing construction has mostly been investigated as an exercise observing from the outside in, and not from a construction sector perspective. The main purpose of this study is thus to explore housing policy and practice compatibility as a major obstacle to housing delivery in general and assess whether the current housing policy is sufficiently responsive to the requirements of the government subsidised housing sector by specifically describing and exploring the effects of Government’s housing procurement policies relative to the ability of the construction sector to supply government subsidised housing. More specifically, the study describes and explores corruption, quality; contractors and worker competency, and government capacity as specific consequences of housing policy and practice incompatibility, as well as factors contributing to recipient dissatisfaction and the housing backlog. Finally, based on the finding, a proposed framework for improving the supply of subsidised housing in South Africa has been developed. The methodology for this study adopted a post-positivist philosophy, embracing a quantitative approach using questionnaires, which incorporated mainly five-point Likert type scale, but also multiple-choice questions, as instruments for data collection. Three surveys were conducted, starting with a pilot study and followed by a primary study, during which a total of 2 884 potential participants within the construction sector across South Africa were randomly sampled and solicited to participate, of which 284 responded. The respondents consisted of four groups: general contractors (76); government housing officials (34); built environment professionals (137), and built environment suppliers (37). An electronic questionnaire was sent by email to all potential participants and allowed four weeks to complete the survey. Furthermore, a housing recipient survey was conducted among 100 randomly selected recipients of government subsidised housing in the Nelson Mandela Metropolitan area, by means of a structured interview using a paper based questionnaire, over a period of two weeks. The primary outcome measures used for this study were the ranked mean scores for mainly descriptive analysis and the Chi-square test, the 𝑡-test, Cohan’s d test, ANOVA and Scheffé test, using Cronbach's alpha as a measure of internal consistency of scale and validity, for inferential analyses and hypotheses testing. Hypothesis testing was founded upon Government’s worldview that its policies will not influence the operations of the construction sector relative to housing construction, and therefore tested respondents’ perspectives with respect to the impact that government policies have in terms of contractor operations and contractor success, as well as its contribution towards the housing backlog, substandard housing, recipient dissatisfaction and corruption. The following results were obtained by means of the hypothesis testing:Government housing procurement policies are inappropriate for application in the government subsidised housing sector. Respondents therefore disagree with the notion that government policy and practices do not impact contractor operations and contractor success, and thus the supply of houses; The application of government housing procurement policies leads to inadequate quality. Respondents therefore disagree with the notion that government preferential procurement policies do not impact quality; Government’s housing procurement policies inappropriately target emerging contractors. Respondents therefore disagree with the notion that Government’s targeting of emerging contractors does not impact housing supply; Government has inadequate capacity to address subsidised housing construction sector requirements in terms of housing projects. Respondents therefore disagree with the notion that Government has the capacity to address subsidised housing construction sector requirements in the supply of housing, and Government subsidised houses do not meet recipients’ expectations. Respondents therefore disagree with the notion that government subsidised houses do meet recipients’ expectations. It thus became apparent that housing supply is mostly inhibited by Government’s housing procurement policy, contributing to various factors, such as quality capability, contractor capability, systemic and administrative capacity, and resulting in recipient dissatisfaction. Using Pearson’s product moment correlation, a framework model was developed to illustrate the process flow, which revealed definitive statistical and practical relationships between these factors, and indeed reflects complex relationships between factors inhibiting supply and resulting in recipient dissatisfaction. To find an appropriate framework model for the purpose of improving housing supply, various sources were consulted. Based on the research question, together with the aims and objectives for this study, as well as the realisation that the problems associated with housing supply relate to the project management of the construction phase, which requires interventions for improving supply, it was decided that a results framework would be the most appropriate for this purpose. The proposed framework is therefore a graphical depiction of how the research process may be used to identify problems in the government subsidised housing sector, questioning how these may be resolved, setting strategies to improve the situation, evolving hypotheses and testing these hypotheses to establish the critical factors to be considered in the process of resolving the problem in the housing sector, by means of implementation and feedback.
- Full Text:
- Date Issued: 2017
A framework for m-voting implementation in South Africa
- Authors: Mpekoa, Noluntu
- Date: 2017
- Subjects: Electronic voting -- South Africa Voting -- Technological innovations , Voting-machines -- South Africa -- Reliability Elections -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/19662 , vital:28927
- Description: Voting enables certain formal decisions to be made through the participation of a given population; and it is the vital part of a democratic process. The method of voting used in South Africa (SA) today is derived from the Australian ballot system. This paper-based voting system, however, is slow, convoluted and inaccurate because of human errors; it is costly and largely inefficient. In the early 1900s, election officials overwhelmingly decided to use electronic voting (E-voting) systems to solve some of the problematic issues of paper-based voting systems. Mobile voting (M-voting) is a subset of E-voting; and it allows citizens to use their mobile phones to cast their votes. Very few countries have endeavoured to implement M-voting, in order to improve mobility and simplify the election procedures. Despite several M-voting initiatives reported worldwide; insufficient attention has been devoted to understanding the factors that influence the success or failure of M-voting implementation. It is also important to note that the implementation of M-voting may be very difficult; if the different modalities that aid successful M-voting implementation are not in place. This study seeks to develop a framework that has the potential to enable the successful implementation of M-voting in SA. The proposed framework is an IT artefact that endeavors to improve human experiences for voting. This study followed a Design-Science approach; and it made use of a case study to collect the data via a literature review, observations, questionnaires, focus groups and expert reviews. The study revealed that there is no institutional, legal and regulatory framework for the proliferation of M-voting in SA. Successful M-voting implementation depends on a compendium of factors, which may be unique in the local context where it is implemented. The framework that resulted from the above was assessed for validity and applicability; after which a modified framework was presented. The research concludes with specific implementation guidelines, as well as areas for future research.
- Full Text:
- Date Issued: 2017
- Authors: Mpekoa, Noluntu
- Date: 2017
- Subjects: Electronic voting -- South Africa Voting -- Technological innovations , Voting-machines -- South Africa -- Reliability Elections -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/19662 , vital:28927
- Description: Voting enables certain formal decisions to be made through the participation of a given population; and it is the vital part of a democratic process. The method of voting used in South Africa (SA) today is derived from the Australian ballot system. This paper-based voting system, however, is slow, convoluted and inaccurate because of human errors; it is costly and largely inefficient. In the early 1900s, election officials overwhelmingly decided to use electronic voting (E-voting) systems to solve some of the problematic issues of paper-based voting systems. Mobile voting (M-voting) is a subset of E-voting; and it allows citizens to use their mobile phones to cast their votes. Very few countries have endeavoured to implement M-voting, in order to improve mobility and simplify the election procedures. Despite several M-voting initiatives reported worldwide; insufficient attention has been devoted to understanding the factors that influence the success or failure of M-voting implementation. It is also important to note that the implementation of M-voting may be very difficult; if the different modalities that aid successful M-voting implementation are not in place. This study seeks to develop a framework that has the potential to enable the successful implementation of M-voting in SA. The proposed framework is an IT artefact that endeavors to improve human experiences for voting. This study followed a Design-Science approach; and it made use of a case study to collect the data via a literature review, observations, questionnaires, focus groups and expert reviews. The study revealed that there is no institutional, legal and regulatory framework for the proliferation of M-voting in SA. Successful M-voting implementation depends on a compendium of factors, which may be unique in the local context where it is implemented. The framework that resulted from the above was assessed for validity and applicability; after which a modified framework was presented. The research concludes with specific implementation guidelines, as well as areas for future research.
- Full Text:
- Date Issued: 2017
Management of material waste and cost overrun in the Nigerian construction industry
- Authors: Saidu, Ibrahim
- Date: 2016
- Subjects: Construction industry -- Materials management -- Nigeria , Construction industry -- Nigeria -- Management
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/3792 , vital:20463
- Description: While wastage of materials has become a serious problem requiring urgent attention in the Nigerian Construction Industry, cost overrun is a problem, which affects 90 percent of the completed projects in the world; the argument on how to reduce/eliminate cost overrun has been on-going for the past 70 years; as the on-site wastage of materials leads to increases in the final project cost. Studies from different parts of the world have shown that construction-material waste represents a relatively large percentage of the production costs. Consequently, as a result of low levels of awareness, the Nigerian construction industry pays little attention to the effects of generated material waste on cost overruns. Thus, this research aimed to investigate the relationship between material waste and cost overrun in the Nigerian construction industry. A comprehensive review of the related literature revealed that all material waste causes are related to cost overrun causes at both pre-contract and post-contract stages of a project; but not vice versa. The mixed method (quantitative and qualitative) approach that is rooted in the positivist paradigm was adopted for this study. Abuja, the federal capital territory of Nigeria was the selected geographical scope of this research, out of which thirty-one (31) construction projects were purposeful selected (projects to the value of 100 million Rand/1.6 billion Naira and above).The research instrument was an interview guide used in conjunction with a tick box. Other sources of data included field investigation (measurement of onsite material waste) and the collection of archival records from bills of quantities, project records, and specifications. Analyses of the findings lead to the conclusion that a relationship exists between material waste and cost overrun; at the pre-contract and at the post-contract stages of a project. The implication is that an increase in material wastage on-site leads to a corresponding increase in the amount of cost overrun, regardless of the percentage allowance for material waste in the process of bill preparation. The study also concluded that the average percentage contribution of material waste to project-cost overruns is four (4) percent. Material-waste sources, causes, and control measures were found to have significant effects (very high, high, medium, low, and very low), in causing or minimising cost overruns at both pre-contract and post-contract stages of projects. The research has developed a conceptual model for the management of material waste and cost overruns in the construction industry based on the results and informed by the theoretical framework. The research has also developed a mathematical model for quantifying the amount of material waste to be generated by a project; as well as a mathematical equation for the effective management of material waste and cost overrun for projects. The study has achieved its aim of establishing an understanding of the issues leading to the relationship between material waste and cost overruns, as well as their management in the Nigerian construction industry. The study recommends that the management of material waste and cost overrun should be revised, based on the findings of this research and included as part of the procurement process. The mathematical models for quantification of onsite material waste, and the mathematical equation for managing material waste and cost overruns developed in the study, could be usefully adopted to improve management of material waste and cost overrun in the Nigerian construction industry.
- Full Text:
- Date Issued: 2016
- Authors: Saidu, Ibrahim
- Date: 2016
- Subjects: Construction industry -- Materials management -- Nigeria , Construction industry -- Nigeria -- Management
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/3792 , vital:20463
- Description: While wastage of materials has become a serious problem requiring urgent attention in the Nigerian Construction Industry, cost overrun is a problem, which affects 90 percent of the completed projects in the world; the argument on how to reduce/eliminate cost overrun has been on-going for the past 70 years; as the on-site wastage of materials leads to increases in the final project cost. Studies from different parts of the world have shown that construction-material waste represents a relatively large percentage of the production costs. Consequently, as a result of low levels of awareness, the Nigerian construction industry pays little attention to the effects of generated material waste on cost overruns. Thus, this research aimed to investigate the relationship between material waste and cost overrun in the Nigerian construction industry. A comprehensive review of the related literature revealed that all material waste causes are related to cost overrun causes at both pre-contract and post-contract stages of a project; but not vice versa. The mixed method (quantitative and qualitative) approach that is rooted in the positivist paradigm was adopted for this study. Abuja, the federal capital territory of Nigeria was the selected geographical scope of this research, out of which thirty-one (31) construction projects were purposeful selected (projects to the value of 100 million Rand/1.6 billion Naira and above).The research instrument was an interview guide used in conjunction with a tick box. Other sources of data included field investigation (measurement of onsite material waste) and the collection of archival records from bills of quantities, project records, and specifications. Analyses of the findings lead to the conclusion that a relationship exists between material waste and cost overrun; at the pre-contract and at the post-contract stages of a project. The implication is that an increase in material wastage on-site leads to a corresponding increase in the amount of cost overrun, regardless of the percentage allowance for material waste in the process of bill preparation. The study also concluded that the average percentage contribution of material waste to project-cost overruns is four (4) percent. Material-waste sources, causes, and control measures were found to have significant effects (very high, high, medium, low, and very low), in causing or minimising cost overruns at both pre-contract and post-contract stages of projects. The research has developed a conceptual model for the management of material waste and cost overruns in the construction industry based on the results and informed by the theoretical framework. The research has also developed a mathematical model for quantifying the amount of material waste to be generated by a project; as well as a mathematical equation for the effective management of material waste and cost overrun for projects. The study has achieved its aim of establishing an understanding of the issues leading to the relationship between material waste and cost overruns, as well as their management in the Nigerian construction industry. The study recommends that the management of material waste and cost overrun should be revised, based on the findings of this research and included as part of the procurement process. The mathematical models for quantification of onsite material waste, and the mathematical equation for managing material waste and cost overruns developed in the study, could be usefully adopted to improve management of material waste and cost overrun in the Nigerian construction industry.
- Full Text:
- Date Issued: 2016
A virtual-community-centric model for coordination in the South African public sector
- Thomas, Godwin Dogara Ayenajeh
- Authors: Thomas, Godwin Dogara Ayenajeh
- Date: 2014
- Subjects: Electronic data processing -- Distributed processing , Interprofessional relations , Virtual work teams
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9831 , http://hdl.handle.net/10948/d1021073
- Description: Organizations face challenges constantly owing to limited resources. As such, to take advantage of new opportunities and to mitigate possible risks they look for new ways to collaborate, by sharing knowledge and competencies. Coordination among partners is critical in order to achieve success. The segmented South African public sector is no different. Driven by the desire to ensure proper service delivery in this sector, various government bodies and service providers play different roles towards the attainment of common goals. This is easier said than done, given the complexity of the distributed nature of the environment. Heterogeneity, autonomy, and the increasing need to collaborate provoke the need to develop an integrative and dynamic coordination support service system in the SA public sector. Thus, the research looks to theories/concepts and existing coordination practices to ground the process of development. To inform the design of the proposed artefact the research employs an interdisciplinary approach championed by coordination theory to review coordination-related theories and concepts. The effort accounts for coordination constructs that characterize and transform the problem and solution spaces. Thus, requirements are explicit towards identifying coordination breakdowns and their resolution. Furthermore, how coordination in a distributed environment is supported in practice is considered from a socio-technical perspective in an effort to account holistically for coordination support. Examining existing solutions identified shortcomings that, if addressed, can help to improve the solutions for coordination, which are often rigidly and narrowly defined. The research argues that introducing a mediating technological artefact conceived from a virtual community and service lenses can serve as a solution to the problem. By adopting a design-science research paradigm, the research develops a model as a primary artefact to support coordination from a collaboration standpoint. The suggestions from theory and practice and the unique case requirement identified through a novel case analysis framework form the basis of the model design. The proposed model support operation calls for an architecture which employs a design pattern that divides a complex whole into smaller, simpler parts, with the aim of reducing the system complexity. Four fundamental functions of the supporting architecture are introduced and discussed as they would support the operation and activities of the proposed collaboration lifecycle model geared towards streamlining coordination in a distributed environment. As part of the model development knowledge contributions are made in several ways. Firstly, an analytical instrument is presented that can be used by an enterprise architect or business analyst to study the coordination status quo of a collaborative activity in a distributed environment. Secondly, a lifecycle model is presented as meta-process model with activities that are geared towards streamlining the coordination of dynamic collaborative activities or projects. Thirdly, an architecture that will enable the technical virtual community-centric, context-aware environment that hosts the process-based operations is offered. Finally, the validation tool that represents the applied contribution to the research that promises possible adaptation for similar circumstances is presented. The artefacts contribute towards a design theory in IS research for the development and improvement of coordination support services in a distributed environment such as the South African public sector.
- Full Text:
- Date Issued: 2014
- Authors: Thomas, Godwin Dogara Ayenajeh
- Date: 2014
- Subjects: Electronic data processing -- Distributed processing , Interprofessional relations , Virtual work teams
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9831 , http://hdl.handle.net/10948/d1021073
- Description: Organizations face challenges constantly owing to limited resources. As such, to take advantage of new opportunities and to mitigate possible risks they look for new ways to collaborate, by sharing knowledge and competencies. Coordination among partners is critical in order to achieve success. The segmented South African public sector is no different. Driven by the desire to ensure proper service delivery in this sector, various government bodies and service providers play different roles towards the attainment of common goals. This is easier said than done, given the complexity of the distributed nature of the environment. Heterogeneity, autonomy, and the increasing need to collaborate provoke the need to develop an integrative and dynamic coordination support service system in the SA public sector. Thus, the research looks to theories/concepts and existing coordination practices to ground the process of development. To inform the design of the proposed artefact the research employs an interdisciplinary approach championed by coordination theory to review coordination-related theories and concepts. The effort accounts for coordination constructs that characterize and transform the problem and solution spaces. Thus, requirements are explicit towards identifying coordination breakdowns and their resolution. Furthermore, how coordination in a distributed environment is supported in practice is considered from a socio-technical perspective in an effort to account holistically for coordination support. Examining existing solutions identified shortcomings that, if addressed, can help to improve the solutions for coordination, which are often rigidly and narrowly defined. The research argues that introducing a mediating technological artefact conceived from a virtual community and service lenses can serve as a solution to the problem. By adopting a design-science research paradigm, the research develops a model as a primary artefact to support coordination from a collaboration standpoint. The suggestions from theory and practice and the unique case requirement identified through a novel case analysis framework form the basis of the model design. The proposed model support operation calls for an architecture which employs a design pattern that divides a complex whole into smaller, simpler parts, with the aim of reducing the system complexity. Four fundamental functions of the supporting architecture are introduced and discussed as they would support the operation and activities of the proposed collaboration lifecycle model geared towards streamlining coordination in a distributed environment. As part of the model development knowledge contributions are made in several ways. Firstly, an analytical instrument is presented that can be used by an enterprise architect or business analyst to study the coordination status quo of a collaborative activity in a distributed environment. Secondly, a lifecycle model is presented as meta-process model with activities that are geared towards streamlining the coordination of dynamic collaborative activities or projects. Thirdly, an architecture that will enable the technical virtual community-centric, context-aware environment that hosts the process-based operations is offered. Finally, the validation tool that represents the applied contribution to the research that promises possible adaptation for similar circumstances is presented. The artefacts contribute towards a design theory in IS research for the development and improvement of coordination support services in a distributed environment such as the South African public sector.
- Full Text:
- Date Issued: 2014
Development of a creep sample retrieval technique and friction weld site repair procedure
- Authors: Wedderburn, Ian Norman
- Date: 2013
- Subjects: Friction welding
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9635 , http://hdl.handle.net/10948/d1020116
- Description: The remnant life monitoring of creep loaded high temperature and pressure components in power stations is critical to ensuring their safe and cost effective operation as failures can have severe consequences. Effective creep life condition monitoring allows for optimising component life predictions and subsequent plant maintenance decisions. In South Africa many power generation stations have been in operation well beyond their 30 year design service life, as such knowledge of the remnant creep life of high temperature and pressure components, such as steam pipelines, becomes of utmost importance. Techniques for the remnant creep life assessments of critical high temperature and pressure components must therefore be as effective as possible. The common and well accepted in-situ inspection technique for assessing creep damage in steam pipes is by the metallographic replication technique. The technique is however limited to the outer surface of the pipe, without information on damage within the wall. This research will illustrate a means of obtaining a sample for creep life analysis with depth through the wall of a pipe, as wells as an alternative technique for the repair of the sample retrieval site. A sample retrieval technique was developed that would retrieve a small diameter cylindrical sample from a cored blind hole for creep analysis by visual creep void assessment or by the small punch creep test. The small punch creep test requires only a small diameter thin disc of material for testing for which its results are comparable with conventional uniaxial creep testing which requires a much larger sample of material. The smaller sample requirement of the small punch creep test therefore allows for a vastly reduced invasive sample retrieval operation and consequently smaller repair size area. Also the fact that the sample is retrieved from a blind hole is advantageous since the pipe wall is not penetrated which would require full plant shutdown. A friction welding technique was identified as an alternative to traditional arc fusion welding for the repair of the sample retrieval site, this technique being the Friction Hydro Pillar Processing technique. Friction Hydro Pillar Processing is a solid-state welding technique and as such has a number of inherent benefits over arc fusion welding as the weld is performed below the melting temperature of the material. From a process point of view Friction Hydro Pillar Processing is ideally suited for automation, has virtually no fumes generated, minimal distortion is experienced and no spatter has to be removed afterwards. The technique has yet to see industrial application and as such development of suitable process parameters was undertaken. Finally, to apply the sample retrieval and repair operations in-situ to a steam pipe in a power plant suitable equipment was developed. Existing friction welding equipment is generally bulky workshop based equipment and is unsuitable for on-site work due to its size and weight. Therefore development of dedicated equipment was required to enable Friction Hydro Pillar Processing to be applied to steam pipes within a power plant environment.
- Full Text:
- Date Issued: 2013
- Authors: Wedderburn, Ian Norman
- Date: 2013
- Subjects: Friction welding
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9635 , http://hdl.handle.net/10948/d1020116
- Description: The remnant life monitoring of creep loaded high temperature and pressure components in power stations is critical to ensuring their safe and cost effective operation as failures can have severe consequences. Effective creep life condition monitoring allows for optimising component life predictions and subsequent plant maintenance decisions. In South Africa many power generation stations have been in operation well beyond their 30 year design service life, as such knowledge of the remnant creep life of high temperature and pressure components, such as steam pipelines, becomes of utmost importance. Techniques for the remnant creep life assessments of critical high temperature and pressure components must therefore be as effective as possible. The common and well accepted in-situ inspection technique for assessing creep damage in steam pipes is by the metallographic replication technique. The technique is however limited to the outer surface of the pipe, without information on damage within the wall. This research will illustrate a means of obtaining a sample for creep life analysis with depth through the wall of a pipe, as wells as an alternative technique for the repair of the sample retrieval site. A sample retrieval technique was developed that would retrieve a small diameter cylindrical sample from a cored blind hole for creep analysis by visual creep void assessment or by the small punch creep test. The small punch creep test requires only a small diameter thin disc of material for testing for which its results are comparable with conventional uniaxial creep testing which requires a much larger sample of material. The smaller sample requirement of the small punch creep test therefore allows for a vastly reduced invasive sample retrieval operation and consequently smaller repair size area. Also the fact that the sample is retrieved from a blind hole is advantageous since the pipe wall is not penetrated which would require full plant shutdown. A friction welding technique was identified as an alternative to traditional arc fusion welding for the repair of the sample retrieval site, this technique being the Friction Hydro Pillar Processing technique. Friction Hydro Pillar Processing is a solid-state welding technique and as such has a number of inherent benefits over arc fusion welding as the weld is performed below the melting temperature of the material. From a process point of view Friction Hydro Pillar Processing is ideally suited for automation, has virtually no fumes generated, minimal distortion is experienced and no spatter has to be removed afterwards. The technique has yet to see industrial application and as such development of suitable process parameters was undertaken. Finally, to apply the sample retrieval and repair operations in-situ to a steam pipe in a power plant suitable equipment was developed. Existing friction welding equipment is generally bulky workshop based equipment and is unsuitable for on-site work due to its size and weight. Therefore development of dedicated equipment was required to enable Friction Hydro Pillar Processing to be applied to steam pipes within a power plant environment.
- Full Text:
- Date Issued: 2013
Guidelines for cybersecurity education campaigns
- Authors: Reid, Rayne
- Date: 2017
- Subjects: Computer security Computer networks -- Security measures
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/14091 , vital:27416
- Description: In our technology- and information-infused world, cyberspace is an integral part of modern-day society. As the number of active cyberspace users increases, so too does the chances of a cyber threat finding a vulnerable target increase. All cyber users who are exposed to cyber risks need to be educated about cyber security. Human beings play a key role in the implementation and governing of an entire cybersecurity and cybersafety solution. The effectiveness of any cybersecurity and cybersafety solutions in a societal or individual context is dependent on the human beings involved in the process. If these human beings are either unaware or not knowledgeable about their roles in the security solution they become the weak link in these cybersecurity solutions. It is essential that all users be educated to combat any threats. Children are a particularly vulnerable subgroup within society. They are digital natives and make use of ICT, and online services with increasing frequency, but this does not mean they are knowledgeable about or behaving securely in their cyber activities. Children will be exposed to cyberspace throughout their lifetimes. Therefore, cybersecurity and cybersafety should be taught to children as a life-skill. There is a lack of well-known, comprehensive cybersecurity and cybersafety educational campaigns which target school children. Most existing information security and cybersecurity education campaigns limit their scope. Literature reports mainly on education campaigns focused on primary businesses, government agencies and tertiary education institutions. Additionally, most guidance for the design and implementation of security and safety campaigns: are for an organisational context, only target organisational users, and mostly provide high-level design recommendations. This thesis addressed the lack of guidance for designing and implementing cybersecurity and cybersafety educational campaigns suited to school learners as a target audience. The thesis aimed to offer guidance for designing and implementing education campaigns that educate school learners about cybersecurity and cybersafety. This was done through the implementation of an action research process over a five-year period. The action research process involved cybersecurity and cybersafety educational interventions at multiple schools. A total of 18 actionable guidelines were derived from this research to guide the design and implementation of cybersecurity and cybersafety education campaigns which aim to educate school children.
- Full Text:
- Date Issued: 2017
- Authors: Reid, Rayne
- Date: 2017
- Subjects: Computer security Computer networks -- Security measures
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/14091 , vital:27416
- Description: In our technology- and information-infused world, cyberspace is an integral part of modern-day society. As the number of active cyberspace users increases, so too does the chances of a cyber threat finding a vulnerable target increase. All cyber users who are exposed to cyber risks need to be educated about cyber security. Human beings play a key role in the implementation and governing of an entire cybersecurity and cybersafety solution. The effectiveness of any cybersecurity and cybersafety solutions in a societal or individual context is dependent on the human beings involved in the process. If these human beings are either unaware or not knowledgeable about their roles in the security solution they become the weak link in these cybersecurity solutions. It is essential that all users be educated to combat any threats. Children are a particularly vulnerable subgroup within society. They are digital natives and make use of ICT, and online services with increasing frequency, but this does not mean they are knowledgeable about or behaving securely in their cyber activities. Children will be exposed to cyberspace throughout their lifetimes. Therefore, cybersecurity and cybersafety should be taught to children as a life-skill. There is a lack of well-known, comprehensive cybersecurity and cybersafety educational campaigns which target school children. Most existing information security and cybersecurity education campaigns limit their scope. Literature reports mainly on education campaigns focused on primary businesses, government agencies and tertiary education institutions. Additionally, most guidance for the design and implementation of security and safety campaigns: are for an organisational context, only target organisational users, and mostly provide high-level design recommendations. This thesis addressed the lack of guidance for designing and implementing cybersecurity and cybersafety educational campaigns suited to school learners as a target audience. The thesis aimed to offer guidance for designing and implementing education campaigns that educate school learners about cybersecurity and cybersafety. This was done through the implementation of an action research process over a five-year period. The action research process involved cybersecurity and cybersafety educational interventions at multiple schools. A total of 18 actionable guidelines were derived from this research to guide the design and implementation of cybersecurity and cybersafety education campaigns which aim to educate school children.
- Full Text:
- Date Issued: 2017
Health information technologies for improved continuity of care: a South African perspective
- Authors: Mostert-Phipps, Nicolette
- Date: 2011
- Subjects: Medical records -- Data processing , Medical technology -- South Africa , Medical innovations -- South Africa , Health -- Information services
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9730 , http://hdl.handle.net/10948/1619 , Medical records -- Data processing , Medical technology -- South Africa , Medical innovations -- South Africa , Health -- Information services
- Description: The fragmented nature of modern health care provision makes it increasingly difficult to achieve continuity of care. This is equally true in the context of the South African healthcare landscape. This results in a strong emphasis on the informational dimension of continuity of care which highlights the importance of the continuity of medical records. Paper-based methods of record keeping are inadequate to support informational continuity of care which leads to an increased interest in electronic methods of record keeping through the adoption of various Health Information Technologies (HITs). This research project investigates the role that various HITs such as Personal Health Records (PHRs), Electronic Medical Records (EMRs), and Health Information Exchanges (HIEs) can play in improving informational continuity of care resulting in the development of a standards-based technological model for the South African healthcare sector. This technological model employs appropriate HITs to address the problem of informational continuity of care in the South African healthcare landscape The benefits that are possible through the adoption of the proposed technological model can only be realized if the proposed HITs are used in a meaningful manner once adopted and implemented. The Delphi method is employed to identify factors that need to be addressed to encourage the adoption and meaningful use of such HITs in the South African healthcare landscape. Lastly, guidelines are formulated to encourage the adoption and meaningful use of HITs in the South African healthcare landscape to improve the continuity of care. The guidelines address both the technological requirements on a high level, as well as the factors that need to be addressed to encourage the adoption and meaningful use of the technological components suggested. These guidelines will play a significant role in raising awareness of the factors that need to be addressed to create an environment conducive to the adoption and meaningful use of appropriate HITs in order to improve the continuity of care in the South African healthcare landscape.
- Full Text:
- Date Issued: 2011
- Authors: Mostert-Phipps, Nicolette
- Date: 2011
- Subjects: Medical records -- Data processing , Medical technology -- South Africa , Medical innovations -- South Africa , Health -- Information services
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9730 , http://hdl.handle.net/10948/1619 , Medical records -- Data processing , Medical technology -- South Africa , Medical innovations -- South Africa , Health -- Information services
- Description: The fragmented nature of modern health care provision makes it increasingly difficult to achieve continuity of care. This is equally true in the context of the South African healthcare landscape. This results in a strong emphasis on the informational dimension of continuity of care which highlights the importance of the continuity of medical records. Paper-based methods of record keeping are inadequate to support informational continuity of care which leads to an increased interest in electronic methods of record keeping through the adoption of various Health Information Technologies (HITs). This research project investigates the role that various HITs such as Personal Health Records (PHRs), Electronic Medical Records (EMRs), and Health Information Exchanges (HIEs) can play in improving informational continuity of care resulting in the development of a standards-based technological model for the South African healthcare sector. This technological model employs appropriate HITs to address the problem of informational continuity of care in the South African healthcare landscape The benefits that are possible through the adoption of the proposed technological model can only be realized if the proposed HITs are used in a meaningful manner once adopted and implemented. The Delphi method is employed to identify factors that need to be addressed to encourage the adoption and meaningful use of such HITs in the South African healthcare landscape. Lastly, guidelines are formulated to encourage the adoption and meaningful use of HITs in the South African healthcare landscape to improve the continuity of care. The guidelines address both the technological requirements on a high level, as well as the factors that need to be addressed to encourage the adoption and meaningful use of the technological components suggested. These guidelines will play a significant role in raising awareness of the factors that need to be addressed to create an environment conducive to the adoption and meaningful use of appropriate HITs in order to improve the continuity of care in the South African healthcare landscape.
- Full Text:
- Date Issued: 2011
Ultra-high precision machining of contact lens polymers
- Authors: Olufayo, Oluwole Ayodeji
- Date: 2015
- Subjects: Contact lenses , Polymers
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/3001 , vital:20385
- Description: Contact lens manufacture requires a high level of accuracy and surface integrity in the range of a few nanometres. Amidst numerous optical manufacturing techniques, single-point diamond turning is widely employed in the making of contact lenses due to its capability of producing optical surfaces of complex shapes and nanometric accuracy. For process optimisation, it is ideal to assess the effects of various conditions and also establish their relationships with the surface finish. Presently, there is little information available on the performance of single point diamond turning when machining contact lens polymers. Therefore, the research work undertaken herewith is aimed at testing known facts in contact lens diamond turning and investigating the performance of ultra-high precision manufacturing of contact lens polymers. Experimental tests were conducted on Roflufocon E, which is a commercially available contact lens polymer and on Precitech Nanoform Ultra-grind 250 precision machining. Tests were performed at varying cutting feeds, speed and depth of cut. Initial experimental tests investigated the influence of process factors affecting surface finish in the UHPM of lenses. The acquired data were statistically analysed using Response Surface Method (RSM) to create a model of the process. Subsequently, a model which uses Runge-Kutta’s fourth order non-linear finite series scheme was developed and adapted to deduce the force occurring at the tool tip. These forces were also statistically analysed and modelled to also predict the effects process factors have on cutting force. Further experimental tests were aimed at establishing the presence of the triboelectric wear phenomena occurring during polymer machining and identifying the most influential process factors. Results indicate that feed rate is a significant factor in the generation of high optical surface quality. In addition, the depth of cut was identified as a significant factor in the generation of low surface roughness in lenses. The influence some of these process factors had was notably linked to triboelectric effects. This tribological effect was generated from the continuous rubbing action of magnetised chips on the cutting tool. This further stresses the presence of high static charging during cutting. Moderately humid cutting conditions presented an adequate means for static charge control and displayed improved surface finishes. In all experimental tests, the feed rate was identified as the most significant factor within the range of cutting parameters employed. Hence, the results validated the fact that feed rate had a high influence in polymer machining. The work also established the relationship on how surface roughness of an optical lens responded to monitoring signals and parameters such as force, feed, speed and depth of cut during machining and it generated models for prediction of surface finishes and appropriate selection of parameters. Furthermore, the study provides a molecular simulation analysis for validating observed conditions occurring at the nanometric scale in polymer machining. This is novel in molecular polymer modelling. The outcome of this research has contributed significantly to the body of knowledge and has provided basic information in the area of precision manufacturing of optical components of high surface integrity such as contact lenses. The application of the research findings presented here cuts across various fields such as medicine, semi-conductors, aerospace, defence, telecom, lasers, instrumentation and life sciences.
- Full Text:
- Date Issued: 2015
- Authors: Olufayo, Oluwole Ayodeji
- Date: 2015
- Subjects: Contact lenses , Polymers
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/3001 , vital:20385
- Description: Contact lens manufacture requires a high level of accuracy and surface integrity in the range of a few nanometres. Amidst numerous optical manufacturing techniques, single-point diamond turning is widely employed in the making of contact lenses due to its capability of producing optical surfaces of complex shapes and nanometric accuracy. For process optimisation, it is ideal to assess the effects of various conditions and also establish their relationships with the surface finish. Presently, there is little information available on the performance of single point diamond turning when machining contact lens polymers. Therefore, the research work undertaken herewith is aimed at testing known facts in contact lens diamond turning and investigating the performance of ultra-high precision manufacturing of contact lens polymers. Experimental tests were conducted on Roflufocon E, which is a commercially available contact lens polymer and on Precitech Nanoform Ultra-grind 250 precision machining. Tests were performed at varying cutting feeds, speed and depth of cut. Initial experimental tests investigated the influence of process factors affecting surface finish in the UHPM of lenses. The acquired data were statistically analysed using Response Surface Method (RSM) to create a model of the process. Subsequently, a model which uses Runge-Kutta’s fourth order non-linear finite series scheme was developed and adapted to deduce the force occurring at the tool tip. These forces were also statistically analysed and modelled to also predict the effects process factors have on cutting force. Further experimental tests were aimed at establishing the presence of the triboelectric wear phenomena occurring during polymer machining and identifying the most influential process factors. Results indicate that feed rate is a significant factor in the generation of high optical surface quality. In addition, the depth of cut was identified as a significant factor in the generation of low surface roughness in lenses. The influence some of these process factors had was notably linked to triboelectric effects. This tribological effect was generated from the continuous rubbing action of magnetised chips on the cutting tool. This further stresses the presence of high static charging during cutting. Moderately humid cutting conditions presented an adequate means for static charge control and displayed improved surface finishes. In all experimental tests, the feed rate was identified as the most significant factor within the range of cutting parameters employed. Hence, the results validated the fact that feed rate had a high influence in polymer machining. The work also established the relationship on how surface roughness of an optical lens responded to monitoring signals and parameters such as force, feed, speed and depth of cut during machining and it generated models for prediction of surface finishes and appropriate selection of parameters. Furthermore, the study provides a molecular simulation analysis for validating observed conditions occurring at the nanometric scale in polymer machining. This is novel in molecular polymer modelling. The outcome of this research has contributed significantly to the body of knowledge and has provided basic information in the area of precision manufacturing of optical components of high surface integrity such as contact lenses. The application of the research findings presented here cuts across various fields such as medicine, semi-conductors, aerospace, defence, telecom, lasers, instrumentation and life sciences.
- Full Text:
- Date Issued: 2015
Developing an e-health framework through electronic healthcare readiness assessment
- Authors: Coleman, Alfred
- Date: 2010
- Subjects: Health -- Computer network resources , Medical care -- South Africa -- Computer network resources , Public health -- South Africa -- Computer network resources , Internet in medicine -- South Africa , Medical informatics -- South Africa , Telecommunication in medicine -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9729 , http://hdl.handle.net/10948/1519 , Health -- Computer network resources , Medical care -- South Africa -- Computer network resources , Public health -- South Africa -- Computer network resources , Internet in medicine -- South Africa , Medical informatics -- South Africa , Telecommunication in medicine -- South Africa
- Description: The major socio-economic development challenges facing most African countries include economic diversification, poverty, unemployment, diseases and the unsustainable use of natural resources. The challenge of quality healthcare provisioning is compounded by the HIV/AIDS pandemic in Sub Saharan Africa. However, there is a great potential in using electronic healthcare (e-health) as one of the supportive systems within the healthcare sector to address these pressing challenges facing healthcare systems in developing countries, including solving inequalities in healthcare delivery between rural and urban hospitals/clinics. The purpose of this study was to compile a Provincial E-health Framework (PEHF) based on the feedback from electronic healthcare readiness assessments conducted in selected rural and urban hospitals/clinics in the North West Province in South Africa. The e-healthcare readiness assessment was conducted in the light of effective use of ICT in patient healthcare record system, consultation among healthcare professionals, prescription of medication, referral of patients and training of healthcare professionals in ICT usage. The study was divided into two phases which were phases 1 and 2 and a qualitative design supported by a case study approach was used. Data were collected using different techniques to enhance triangulation of data. The techniques included group interviews, qualitative questionnaires, photographs, document analysis and expert opinions. The outcome of the assessment led to the compilation of the PEHF which was based on Service Oriented Architecture (SOA). SOA was chosen to integrate the hospitals/clinics‟ ICT infrastructure yet allowing each hospital/clinic the autonomy to control its own ICT environment. To assist hospitals/clinics integrate their ICT resources, this research study proposed an Infrastructure Network Architecture which clustered hospitals/clinics to share common ICT infrastructure instead of duplicating these resources. Furthermore, processes of the e-health services (e-patient health IV record system, e-consultation system, e-prescription system, e-referral system and e-training system) were provided to assist in the implementation of the PEHF. Finally, a set of guidelines were provided by the research study to aid the implementation of the PEHF.
- Full Text:
- Date Issued: 2010
- Authors: Coleman, Alfred
- Date: 2010
- Subjects: Health -- Computer network resources , Medical care -- South Africa -- Computer network resources , Public health -- South Africa -- Computer network resources , Internet in medicine -- South Africa , Medical informatics -- South Africa , Telecommunication in medicine -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9729 , http://hdl.handle.net/10948/1519 , Health -- Computer network resources , Medical care -- South Africa -- Computer network resources , Public health -- South Africa -- Computer network resources , Internet in medicine -- South Africa , Medical informatics -- South Africa , Telecommunication in medicine -- South Africa
- Description: The major socio-economic development challenges facing most African countries include economic diversification, poverty, unemployment, diseases and the unsustainable use of natural resources. The challenge of quality healthcare provisioning is compounded by the HIV/AIDS pandemic in Sub Saharan Africa. However, there is a great potential in using electronic healthcare (e-health) as one of the supportive systems within the healthcare sector to address these pressing challenges facing healthcare systems in developing countries, including solving inequalities in healthcare delivery between rural and urban hospitals/clinics. The purpose of this study was to compile a Provincial E-health Framework (PEHF) based on the feedback from electronic healthcare readiness assessments conducted in selected rural and urban hospitals/clinics in the North West Province in South Africa. The e-healthcare readiness assessment was conducted in the light of effective use of ICT in patient healthcare record system, consultation among healthcare professionals, prescription of medication, referral of patients and training of healthcare professionals in ICT usage. The study was divided into two phases which were phases 1 and 2 and a qualitative design supported by a case study approach was used. Data were collected using different techniques to enhance triangulation of data. The techniques included group interviews, qualitative questionnaires, photographs, document analysis and expert opinions. The outcome of the assessment led to the compilation of the PEHF which was based on Service Oriented Architecture (SOA). SOA was chosen to integrate the hospitals/clinics‟ ICT infrastructure yet allowing each hospital/clinic the autonomy to control its own ICT environment. To assist hospitals/clinics integrate their ICT resources, this research study proposed an Infrastructure Network Architecture which clustered hospitals/clinics to share common ICT infrastructure instead of duplicating these resources. Furthermore, processes of the e-health services (e-patient health IV record system, e-consultation system, e-prescription system, e-referral system and e-training system) were provided to assist in the implementation of the PEHF. Finally, a set of guidelines were provided by the research study to aid the implementation of the PEHF.
- Full Text:
- Date Issued: 2010
A multi-stakeholder approach to productivity improvement in the South African construction industry
- Authors: Adebowale, Oluseyi Julius
- Date: 2018
- Subjects: Labor productivity , Construction industry -- Labor productivity Construction industry -- South Africa Construction industry -- Management
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/19597 , vital:28902
- Description: As poor productivity in construction continues to constitute a setback to projects’ success in different countries of the world, the situation in South African construction is no exception. Poor productivity on construction projects and its detrimental impact on project objectives have continually resonated for decades. As a result, several strategies, interventions, and measures that aimed at improving productivity in the construction sector have been proposed. Nevertheless, the phenomenon importunately creates a major challenge on construction projects, and by extension, the construction industry especially in developing countries. Even when construction management literature acknowledged the commonalities in productivity influences, the practice of addressing construction productivity influences as separate entities has gained much relevance over the years. Taking into perspective, the multidisciplinary and complexity inherent in construction, a systemic approach to addressing construction productivity influences is fast becoming essential. This study addressed productivity-influencing factors by considering factors that are related to rework, shortage of construction resources, constructability, political, socio-economic, working environment, welfare conditions, disputes, planning and training. Consequently, the interdependencies of the most significant productivity-influencing factors in South African construction was developed in the form of a qualitative model. The study adopts the underlying assumptions of the quantitative approach, but also accepts some qualitative data. With regards to the subject of enquiry, the paradigm of the research is positivism which consists of realists’ ontological prescriptions and objectivists’ epistemological prescriptions. Site engineers, site managers, and site supervisors working for cidb registered contractors in four South African provinces constitute the sample stratum. Statistical Package for the Social Sciences (SPSS) version 24 was used to analyse the data gathered from these project participants; both descriptive and inferential statistics were used. Descriptive statistics was used to summarise and describe the data obtained, while inferential statistics in the form of analysis of variance, T-test, and Tukey post hoc test were adopted. The study reported the most significant factors which negatively influence productivity on South African construction projects as inadequate workers’ skills, defective workmanship, the practice of awarding contracts to lowest bidders, political activities resulting in industrial action, inadequate contractors’ experience in project planning, payment delays by contractors, and corruption. Furthermore, it was found that contractors largely share similar perceptions regarding the factors that constrain productivity growth in South African construction. The approximate level of labour, material, and plant productivity on South African construction projects is 50.4%, 72.9%, and 62.0% respectively, while the approximate multifactor productivity was estimated as 61.8%. The study concluded that productivity has a considerable relationship with time and cost and a less potent relationship with quality. Based on the research findings, contractors’, consultants’, clients’ and government qualitative intervention models were proposed while recommendations towards improving South African construction productivity were made. The study recommended the reinvention of the apprentice training system to develop skills in construction, the involvement of stakeholders in improving workers’ skills, improved collaboration between the construction industry and higher institutions of learning regarding curricula development, adequate supervision of construction activities to mitigate the propagation of rework on construction projects, character in leadership, and integrity of project stakeholders.
- Full Text:
- Date Issued: 2018
- Authors: Adebowale, Oluseyi Julius
- Date: 2018
- Subjects: Labor productivity , Construction industry -- Labor productivity Construction industry -- South Africa Construction industry -- Management
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/19597 , vital:28902
- Description: As poor productivity in construction continues to constitute a setback to projects’ success in different countries of the world, the situation in South African construction is no exception. Poor productivity on construction projects and its detrimental impact on project objectives have continually resonated for decades. As a result, several strategies, interventions, and measures that aimed at improving productivity in the construction sector have been proposed. Nevertheless, the phenomenon importunately creates a major challenge on construction projects, and by extension, the construction industry especially in developing countries. Even when construction management literature acknowledged the commonalities in productivity influences, the practice of addressing construction productivity influences as separate entities has gained much relevance over the years. Taking into perspective, the multidisciplinary and complexity inherent in construction, a systemic approach to addressing construction productivity influences is fast becoming essential. This study addressed productivity-influencing factors by considering factors that are related to rework, shortage of construction resources, constructability, political, socio-economic, working environment, welfare conditions, disputes, planning and training. Consequently, the interdependencies of the most significant productivity-influencing factors in South African construction was developed in the form of a qualitative model. The study adopts the underlying assumptions of the quantitative approach, but also accepts some qualitative data. With regards to the subject of enquiry, the paradigm of the research is positivism which consists of realists’ ontological prescriptions and objectivists’ epistemological prescriptions. Site engineers, site managers, and site supervisors working for cidb registered contractors in four South African provinces constitute the sample stratum. Statistical Package for the Social Sciences (SPSS) version 24 was used to analyse the data gathered from these project participants; both descriptive and inferential statistics were used. Descriptive statistics was used to summarise and describe the data obtained, while inferential statistics in the form of analysis of variance, T-test, and Tukey post hoc test were adopted. The study reported the most significant factors which negatively influence productivity on South African construction projects as inadequate workers’ skills, defective workmanship, the practice of awarding contracts to lowest bidders, political activities resulting in industrial action, inadequate contractors’ experience in project planning, payment delays by contractors, and corruption. Furthermore, it was found that contractors largely share similar perceptions regarding the factors that constrain productivity growth in South African construction. The approximate level of labour, material, and plant productivity on South African construction projects is 50.4%, 72.9%, and 62.0% respectively, while the approximate multifactor productivity was estimated as 61.8%. The study concluded that productivity has a considerable relationship with time and cost and a less potent relationship with quality. Based on the research findings, contractors’, consultants’, clients’ and government qualitative intervention models were proposed while recommendations towards improving South African construction productivity were made. The study recommended the reinvention of the apprentice training system to develop skills in construction, the involvement of stakeholders in improving workers’ skills, improved collaboration between the construction industry and higher institutions of learning regarding curricula development, adequate supervision of construction activities to mitigate the propagation of rework on construction projects, character in leadership, and integrity of project stakeholders.
- Full Text:
- Date Issued: 2018
The machinability of rapidly solidified aluminium alloy for optical mould inserts
- Authors: Otieno, Timothy
- Date: 2018
- Subjects: Aluminum alloys , Automobiles -- Materials Materials -- Mechanical properties
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/23097 , vital:30415
- Description: Ultra-high precision machining is a material removing process under the nanotechnology regime whereby the highest dimensional accuracies are attained. Critical components for optical devices and optical measuring systems are mainly produced through ultra-high precision machining. Their mass production is usually implemented by utilising optical moulds. Aluminium alloys have proven to be advantageous and very commonly used in the photonics industry for moulds. This ever-increasing use and demand within optics have led to the development of newly modified grades of aluminium alloys produced by rapid solidification in the foundry process. The newer grades are characterised by finer microstructures and improved mechanical and physical properties. The main inconvenience in their usage currently lies in their very limited machining database. This research investigates the machinability of rapidly solidified aluminium, RSA 905, under varying cutting conditions in single point diamond turning. The machining parameters varied were cutting speed, feed rate and depth of cut. The resulting surface roughness of the workpiece and wear of the diamond tool were measured at various intervals. Acoustic emissions and cutting force were also monitored during machining. The results were statistically analysed and accurate predictive models were developed. Generally, very low tool wear, within 3 to 5 μm, and very low surface roughness, within 3 to 8 nm, was obtained. Acoustic emissions recorded were in the range of 0.06 to 0.13 V and cutting forces were in the range of 0.08 to 0.94 N. The trends of the monitored acoustic emissions and cutting force showed to have a linked representation of the tool wear and surface roughness results. Contour maps were generated to identify zones where the cutting parameters produced the best results. In addition, a range of machining parameters were presented for optimum quality where surface roughness and tool wear can be minimised. As the machining is of a nanometric scale, a molecular dynamics approach was applied to investigate the underlying mechanisms at atom level. The nanomachining simulations were found to have a correlation to the actual machining results and microstructural nature of the alloy. This research proves that rapidly solidified aluminium is a superior alternative to traditional aluminium alloys and provides a good reference with room for flexibility that machinists can apply when using rapidly solidified aluminium alloys. Efficiency could be improved by reducing the required machining interruption through effective monitoring and performance could be improved by maintaining quality and extending tool life through parameter selection.
- Full Text:
- Date Issued: 2018
- Authors: Otieno, Timothy
- Date: 2018
- Subjects: Aluminum alloys , Automobiles -- Materials Materials -- Mechanical properties
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/23097 , vital:30415
- Description: Ultra-high precision machining is a material removing process under the nanotechnology regime whereby the highest dimensional accuracies are attained. Critical components for optical devices and optical measuring systems are mainly produced through ultra-high precision machining. Their mass production is usually implemented by utilising optical moulds. Aluminium alloys have proven to be advantageous and very commonly used in the photonics industry for moulds. This ever-increasing use and demand within optics have led to the development of newly modified grades of aluminium alloys produced by rapid solidification in the foundry process. The newer grades are characterised by finer microstructures and improved mechanical and physical properties. The main inconvenience in their usage currently lies in their very limited machining database. This research investigates the machinability of rapidly solidified aluminium, RSA 905, under varying cutting conditions in single point diamond turning. The machining parameters varied were cutting speed, feed rate and depth of cut. The resulting surface roughness of the workpiece and wear of the diamond tool were measured at various intervals. Acoustic emissions and cutting force were also monitored during machining. The results were statistically analysed and accurate predictive models were developed. Generally, very low tool wear, within 3 to 5 μm, and very low surface roughness, within 3 to 8 nm, was obtained. Acoustic emissions recorded were in the range of 0.06 to 0.13 V and cutting forces were in the range of 0.08 to 0.94 N. The trends of the monitored acoustic emissions and cutting force showed to have a linked representation of the tool wear and surface roughness results. Contour maps were generated to identify zones where the cutting parameters produced the best results. In addition, a range of machining parameters were presented for optimum quality where surface roughness and tool wear can be minimised. As the machining is of a nanometric scale, a molecular dynamics approach was applied to investigate the underlying mechanisms at atom level. The nanomachining simulations were found to have a correlation to the actual machining results and microstructural nature of the alloy. This research proves that rapidly solidified aluminium is a superior alternative to traditional aluminium alloys and provides a good reference with room for flexibility that machinists can apply when using rapidly solidified aluminium alloys. Efficiency could be improved by reducing the required machining interruption through effective monitoring and performance could be improved by maintaining quality and extending tool life through parameter selection.
- Full Text:
- Date Issued: 2018
A framework for enhancing trust for improved participation in electronic marketplaces accessed from mobile platforms
- Isabirye, Naomi Nabirye, Von Solms, R
- Authors: Isabirye, Naomi Nabirye , Von Solms, R
- Date: 2016
- Subjects: Information technology -- Economic aspects -- South Africa Agricultural innovations -- South Africa Agricultural systems -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/20019 , vital:29053
- Description: Information and communication technologies (ICTs) have been widely researched as a mechanism for improving the socio-economic status of disadvantaged, rural communities. In order to do this numerous technology-based initiatives have been introduced into disadvantaged, rural communities to assist them in various aspects of their lives. Unfortunately, even when the proposed benefit of a particular technology is clearly evident to its initiators, the adoption by the target users is often uncertain. This has also been the case with e-commerce in agriculture. Despite the numerous benefits of e-commerce for agricultural producers, the uptake has been low. Trust is a critical pre-condition for the adoption of e-marketplaces. E-marketplaces expose consumers to the risk of non-delivery or misrepresentation of goods ordered and the misuse of personal information by external parties. Additionally, the time investment needed to make a shift to e-marketplaces and the opinions of important reference groups affects the user’s willingness to trust and depend on an e-marketplace. This study was undertaken to assess the extent to which rural users with limited ICT experience would trust and, consequently, adopt an e-marketplace to support agricultural trade. A pragmatic philosophy was adopted in this study, indicating that the researcher’s view of reality is founded on the practical implications and outcomes that are observed. This study used a Canonical Action Research strategy to design, develop and deploy a voice based e-marketplace to assist the trading activities of a Western Cape based aloe community. The community was allowed to utilise thee-marketplace over a period of eight weeks. Thereafter, interviews were held with the participants to investigate their perceptions of the technology. As a result, a model proposing the factors that must be in place for trust to be achieved in a voice based e-marketplace was proposed. The study found that the trustworthiness of a technology results from the technology’s technical capability to satisfy the needs of its users reliably. Usability and security were found to be important determinants of the trustworthiness of a technology. Furthermore, the requirements elicitation process was found to be central to achieving trust as it defines the necessary criteria for developing secure, usable, functional, and reliable technologies that meet the needs of their users.
- Full Text:
- Date Issued: 2016
- Authors: Isabirye, Naomi Nabirye , Von Solms, R
- Date: 2016
- Subjects: Information technology -- Economic aspects -- South Africa Agricultural innovations -- South Africa Agricultural systems -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/20019 , vital:29053
- Description: Information and communication technologies (ICTs) have been widely researched as a mechanism for improving the socio-economic status of disadvantaged, rural communities. In order to do this numerous technology-based initiatives have been introduced into disadvantaged, rural communities to assist them in various aspects of their lives. Unfortunately, even when the proposed benefit of a particular technology is clearly evident to its initiators, the adoption by the target users is often uncertain. This has also been the case with e-commerce in agriculture. Despite the numerous benefits of e-commerce for agricultural producers, the uptake has been low. Trust is a critical pre-condition for the adoption of e-marketplaces. E-marketplaces expose consumers to the risk of non-delivery or misrepresentation of goods ordered and the misuse of personal information by external parties. Additionally, the time investment needed to make a shift to e-marketplaces and the opinions of important reference groups affects the user’s willingness to trust and depend on an e-marketplace. This study was undertaken to assess the extent to which rural users with limited ICT experience would trust and, consequently, adopt an e-marketplace to support agricultural trade. A pragmatic philosophy was adopted in this study, indicating that the researcher’s view of reality is founded on the practical implications and outcomes that are observed. This study used a Canonical Action Research strategy to design, develop and deploy a voice based e-marketplace to assist the trading activities of a Western Cape based aloe community. The community was allowed to utilise thee-marketplace over a period of eight weeks. Thereafter, interviews were held with the participants to investigate their perceptions of the technology. As a result, a model proposing the factors that must be in place for trust to be achieved in a voice based e-marketplace was proposed. The study found that the trustworthiness of a technology results from the technology’s technical capability to satisfy the needs of its users reliably. Usability and security were found to be important determinants of the trustworthiness of a technology. Furthermore, the requirements elicitation process was found to be central to achieving trust as it defines the necessary criteria for developing secure, usable, functional, and reliable technologies that meet the needs of their users.
- Full Text:
- Date Issued: 2016
The role of psychosocial recuperative therapy in enhancing construction performance on projects
- Authors: Obiozo, Rita Ngozi
- Date: 2018
- Subjects: Building -- Psychological aspects , Construction industry -- Accidents Building -- Economic aspects Feng shui
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/23080 , vital:30414
- Description: Research findings indicate that recent improvements in construction management initiatives have not substantially reduced the incidence of fatal occurrences and accidents in construction due to negligence and error. Some of the traumatic and causative factors include the dissipation of vital energy, health, safety, and wellbeing in the construction workforce due to the lack of contact with nature on construction sites, combined with the exhaustive nature of the work, and multiple stress factors in construction. The resultant effect is visible in the form of increased rework, disputes, and socio-psycho-traumatic factors that result in a reduction in profit margins due to the daily repetition of health and safety (H&S) hazards and quality errors. To address these issues there is a need for the exploration of the inherent potential to achieve exceptional environmental credentials on construction worksites attributable to the biophilic design concept of the intelligent construction workplace. This would involve the introduction of a biophilic construction site model (BCSM) that has the potential of establishing the continuous flow of natural energy that would replenish the vital life force and impact on the improvement of the performance of the construction workforce and management throughout the life cycle of the construction process. The objective of the initiative involves the introduction of dynamic harmonious energy in consonance with the theory of biophilia and feng shui principles of wellness interventions, which would introduce and enhance the flow of natural energy relative to the greening of construction sites in aid of H&S, wellbeing and human factors for ergonomics in construction. The methodology adopted, involved a survey of the related literature, and the triangulation and longitudinal assessment of multiple case studies of viable construction sites in progress. The applied technique included a greening construction site survey, interviews, observations, photo elicitation, questionnaire surveys, and a focus group study conducted with the construction workforce during the construction process. Findings indicate a potential increase in the level of sustainable behaviour in construction that impacts on the enhanced concentration and level of focus of the workforce, as well as a reduction in H&S and quality errors that militate against consistent improvement of the construction process. These efforts add value and novelty to the construction management body of knowledge (CMBOK) with regards to the green building construction and sustainable sites initiative. Research findings established the ‘greening of the construction site / biophilic construction site model (BCSM)’ as a cost-effective strategy towards the healing of the ‘sick construction site syndrome’ and the psychosocial recuperative and rejunative therapy for the workforce in construction for productive performance. It is significant and notable that the empirical findings relative to the BCSM strategy were found to substantiate effectively as the missing link in the establishment and reconstitution of Maslow’s hierarchy of needs, which according to research findings, is currently conceptual. The recommendations include the suggestions for the ‘informal dynamic rock garden design’ as suitable for the BCSM with the inclusion of ‘plants as a primary indicator’ in construction site premises, site offices, material sheds, welfare facilities including ‘lunch break retreats and outdoor shelters’. The recommendation of the BCSM strategy for the construction site is aimed towards the onset of construction as opposed to the conclusion of works / external works at the end of the project as is currently practiced. For effective application, the empirical findings relative to the study recommend that the procurement of the BCSM as a ‘silent and indispensable team mate’ should commence from the conceptual design, pre-bid / tender stages, to the fiscal planning and setting out of worksites, as well as its inclusion in the ‘curriculum of studies’ for the instruction of emerging construction management practitioners. In furtherance of the CMBOK and the enhancement of the BCSM strategy and the ‘humanistic value of the intelligent construction worksite’, the study recommends that the concept of ‘frozen music’ be addressed in future research relative to the ‘biophilic design concept’ to determine its role in enhancing cost effective performance, H&S, ergonomics, and the health and wellbeing of workers in construction.
- Full Text:
- Date Issued: 2018
- Authors: Obiozo, Rita Ngozi
- Date: 2018
- Subjects: Building -- Psychological aspects , Construction industry -- Accidents Building -- Economic aspects Feng shui
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/23080 , vital:30414
- Description: Research findings indicate that recent improvements in construction management initiatives have not substantially reduced the incidence of fatal occurrences and accidents in construction due to negligence and error. Some of the traumatic and causative factors include the dissipation of vital energy, health, safety, and wellbeing in the construction workforce due to the lack of contact with nature on construction sites, combined with the exhaustive nature of the work, and multiple stress factors in construction. The resultant effect is visible in the form of increased rework, disputes, and socio-psycho-traumatic factors that result in a reduction in profit margins due to the daily repetition of health and safety (H&S) hazards and quality errors. To address these issues there is a need for the exploration of the inherent potential to achieve exceptional environmental credentials on construction worksites attributable to the biophilic design concept of the intelligent construction workplace. This would involve the introduction of a biophilic construction site model (BCSM) that has the potential of establishing the continuous flow of natural energy that would replenish the vital life force and impact on the improvement of the performance of the construction workforce and management throughout the life cycle of the construction process. The objective of the initiative involves the introduction of dynamic harmonious energy in consonance with the theory of biophilia and feng shui principles of wellness interventions, which would introduce and enhance the flow of natural energy relative to the greening of construction sites in aid of H&S, wellbeing and human factors for ergonomics in construction. The methodology adopted, involved a survey of the related literature, and the triangulation and longitudinal assessment of multiple case studies of viable construction sites in progress. The applied technique included a greening construction site survey, interviews, observations, photo elicitation, questionnaire surveys, and a focus group study conducted with the construction workforce during the construction process. Findings indicate a potential increase in the level of sustainable behaviour in construction that impacts on the enhanced concentration and level of focus of the workforce, as well as a reduction in H&S and quality errors that militate against consistent improvement of the construction process. These efforts add value and novelty to the construction management body of knowledge (CMBOK) with regards to the green building construction and sustainable sites initiative. Research findings established the ‘greening of the construction site / biophilic construction site model (BCSM)’ as a cost-effective strategy towards the healing of the ‘sick construction site syndrome’ and the psychosocial recuperative and rejunative therapy for the workforce in construction for productive performance. It is significant and notable that the empirical findings relative to the BCSM strategy were found to substantiate effectively as the missing link in the establishment and reconstitution of Maslow’s hierarchy of needs, which according to research findings, is currently conceptual. The recommendations include the suggestions for the ‘informal dynamic rock garden design’ as suitable for the BCSM with the inclusion of ‘plants as a primary indicator’ in construction site premises, site offices, material sheds, welfare facilities including ‘lunch break retreats and outdoor shelters’. The recommendation of the BCSM strategy for the construction site is aimed towards the onset of construction as opposed to the conclusion of works / external works at the end of the project as is currently practiced. For effective application, the empirical findings relative to the study recommend that the procurement of the BCSM as a ‘silent and indispensable team mate’ should commence from the conceptual design, pre-bid / tender stages, to the fiscal planning and setting out of worksites, as well as its inclusion in the ‘curriculum of studies’ for the instruction of emerging construction management practitioners. In furtherance of the CMBOK and the enhancement of the BCSM strategy and the ‘humanistic value of the intelligent construction worksite’, the study recommends that the concept of ‘frozen music’ be addressed in future research relative to the ‘biophilic design concept’ to determine its role in enhancing cost effective performance, H&S, ergonomics, and the health and wellbeing of workers in construction.
- Full Text:
- Date Issued: 2018
Influences on construction project delivery time
- Authors: Olatunji, Aiyetan Ayodeji
- Date: 2010
- Subjects: Construction industry -- South Africa -- Management , Project management -- South Africa , Construction industry -- Economic aspects -- South Africa , Construction industry -- Technological innovations -- South Africa , Construction industry -- Labor productivity -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9681 , http://hdl.handle.net/10948/1548 , Construction industry -- South Africa -- Management , Project management -- South Africa , Construction industry -- Economic aspects -- South Africa , Construction industry -- Technological innovations -- South Africa , Construction industry -- Labor productivity -- South Africa
- Description: Construction delays are a global phenomenon. Factors causing construction delays in construction projects differ from country to country, due to different prevailing conditions. The prevailing conditions that could exert an influence on project delivery time are: political, economic, and physical factors as well as level of technological development; management style, and construction techniques. The construction industry is a major player in the economy, generating both employment and wealth. However, many projects experience extensive delays and thereby exceed initial time and cost estimates. This study aims at determining the causes of delays in project delivery in South Africa; evolving interventions, and developing a model for the delivery of projects on time. Inferential and linear regression statistical tools were used in the analysis of data for the study. The sample population consists of architects, builders, quantity surveyors, structural engineers, and clients, and the metropolitan cities of five provinces constituted the geographical delimitation of the study. The provinces are: Eastern Cape; Free State; Gauteng; KwaZulu-Natal, and Western Cape. The metropolitan cities are: Bloemfontein; Cape Town; Durban; Johannesburg, and Port Elizabeth. Findings which negatively influence project delivery time in South Africa include the following: lack of adequate planning; management style; the lack of constructability reviews of designs; inadequate motivation of workers; economic policies; lack of prompt payment to contractors, and quality of management during design and construction. Recommendations include: (1) The introduction of the following courses in built environment tertiary education � quality management competences; operational planning; design management, and generic management; (2) pre-qualification of suppliers; (3) inclusion of the following in tender documentation � human resource schedule; plant and equipment schedule; quality assurance plan, and work schedule; (4) appointment of materials specialists on a large projects; (5) the model developed should be adopted for use in the South African construction industry for the delivery of projects on time, and (6) the linear regression equation: Y = 13.1159 + 1.1341x or 35.3 percent addition on time for the estimation of project delivery time.
- Full Text:
- Date Issued: 2010
- Authors: Olatunji, Aiyetan Ayodeji
- Date: 2010
- Subjects: Construction industry -- South Africa -- Management , Project management -- South Africa , Construction industry -- Economic aspects -- South Africa , Construction industry -- Technological innovations -- South Africa , Construction industry -- Labor productivity -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9681 , http://hdl.handle.net/10948/1548 , Construction industry -- South Africa -- Management , Project management -- South Africa , Construction industry -- Economic aspects -- South Africa , Construction industry -- Technological innovations -- South Africa , Construction industry -- Labor productivity -- South Africa
- Description: Construction delays are a global phenomenon. Factors causing construction delays in construction projects differ from country to country, due to different prevailing conditions. The prevailing conditions that could exert an influence on project delivery time are: political, economic, and physical factors as well as level of technological development; management style, and construction techniques. The construction industry is a major player in the economy, generating both employment and wealth. However, many projects experience extensive delays and thereby exceed initial time and cost estimates. This study aims at determining the causes of delays in project delivery in South Africa; evolving interventions, and developing a model for the delivery of projects on time. Inferential and linear regression statistical tools were used in the analysis of data for the study. The sample population consists of architects, builders, quantity surveyors, structural engineers, and clients, and the metropolitan cities of five provinces constituted the geographical delimitation of the study. The provinces are: Eastern Cape; Free State; Gauteng; KwaZulu-Natal, and Western Cape. The metropolitan cities are: Bloemfontein; Cape Town; Durban; Johannesburg, and Port Elizabeth. Findings which negatively influence project delivery time in South Africa include the following: lack of adequate planning; management style; the lack of constructability reviews of designs; inadequate motivation of workers; economic policies; lack of prompt payment to contractors, and quality of management during design and construction. Recommendations include: (1) The introduction of the following courses in built environment tertiary education � quality management competences; operational planning; design management, and generic management; (2) pre-qualification of suppliers; (3) inclusion of the following in tender documentation � human resource schedule; plant and equipment schedule; quality assurance plan, and work schedule; (4) appointment of materials specialists on a large projects; (5) the model developed should be adopted for use in the South African construction industry for the delivery of projects on time, and (6) the linear regression equation: Y = 13.1159 + 1.1341x or 35.3 percent addition on time for the estimation of project delivery time.
- Full Text:
- Date Issued: 2010
South African public sector property management: a performance model
- Mali-Swelindawo, Bongiwe Lorreta, Yan, Bingwen
- Authors: Mali-Swelindawo, Bongiwe Lorreta , Yan, Bingwen
- Date: 2017
- Subjects: Performance -- Management -- South Africa Performance standards -- South Africa , Public buildings -- South Africa Real estate management -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/21185 , vital:29454
- Description: This research was conducted with the intention of accomplishing effective property management (PM) in order for public sector properties in South Africa (SA) SA to fulfil more remarkably, public sector property stakeholders’ requirements. In particular, this study was concluded within a South African municipal environment with the specific purpose of alleviating South African municipalities from problems associated with overall poor operational performance, dissatisfied public sector property stakeholders, and inadequacies in competitiveness and global alignment. The primary objective of this study was to develop a performance model deemed necessary for the effective management of public sector properties in SA. This was achieved by developing a performance model for effective management of public sector properties, a model to systematically monitor, measure and control current expectations and changes within a public sector property management function. Herewith, performance model for effective management of public sector properties in South Africa. At the time of conducting this study, there was no conceptual model developed for performance management of public sector properties. In order to develop the performance model, the conceptual model identified key elements that included: 1) obsolescence and strategic factors; 2) global alignment; 3) finance and cost control; 4) PESTEL impact; 5) transformation and sustainability; 6) leadership and governance; and 7) monitoring, measurement and control as influences that directly impact a perceived successful management of public sector properties in SA. The study also took the form of a quantitative research project that included a formal survey of the identified population sample. The main statistical procedure employed was Structural Equation Modelling (SEM). Originally, the study offered 24 hypotheses; however, only 11 hypotheses could be confirmed by SEM measurement. Therefore, through SEM, the significance of the relationships between variables could be tested. Appropriate quantitative data were collected from public and private South African Built Environment professionals, students and other academics. The research made use of snowball sampling through questionnaires, with a sample size of 171. It is anticipated that findings of this study will be acknowledged by public sector PM in an effort to resolve PM problems through the incorporation of pertinent recommendations. Likewise, since the performance model for effective management of public sector properties was not extant prior to this study, this research is cutting-edge and therefore pioneering to PM, especially within the public sector.
- Full Text:
- Date Issued: 2017
- Authors: Mali-Swelindawo, Bongiwe Lorreta , Yan, Bingwen
- Date: 2017
- Subjects: Performance -- Management -- South Africa Performance standards -- South Africa , Public buildings -- South Africa Real estate management -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/21185 , vital:29454
- Description: This research was conducted with the intention of accomplishing effective property management (PM) in order for public sector properties in South Africa (SA) SA to fulfil more remarkably, public sector property stakeholders’ requirements. In particular, this study was concluded within a South African municipal environment with the specific purpose of alleviating South African municipalities from problems associated with overall poor operational performance, dissatisfied public sector property stakeholders, and inadequacies in competitiveness and global alignment. The primary objective of this study was to develop a performance model deemed necessary for the effective management of public sector properties in SA. This was achieved by developing a performance model for effective management of public sector properties, a model to systematically monitor, measure and control current expectations and changes within a public sector property management function. Herewith, performance model for effective management of public sector properties in South Africa. At the time of conducting this study, there was no conceptual model developed for performance management of public sector properties. In order to develop the performance model, the conceptual model identified key elements that included: 1) obsolescence and strategic factors; 2) global alignment; 3) finance and cost control; 4) PESTEL impact; 5) transformation and sustainability; 6) leadership and governance; and 7) monitoring, measurement and control as influences that directly impact a perceived successful management of public sector properties in SA. The study also took the form of a quantitative research project that included a formal survey of the identified population sample. The main statistical procedure employed was Structural Equation Modelling (SEM). Originally, the study offered 24 hypotheses; however, only 11 hypotheses could be confirmed by SEM measurement. Therefore, through SEM, the significance of the relationships between variables could be tested. Appropriate quantitative data were collected from public and private South African Built Environment professionals, students and other academics. The research made use of snowball sampling through questionnaires, with a sample size of 171. It is anticipated that findings of this study will be acknowledged by public sector PM in an effort to resolve PM problems through the incorporation of pertinent recommendations. Likewise, since the performance model for effective management of public sector properties was not extant prior to this study, this research is cutting-edge and therefore pioneering to PM, especially within the public sector.
- Full Text:
- Date Issued: 2017
A framework for improving construction workers’ health and safety practices in Lagos, Nigeria
- Authors: Kukoyi, Patricia Omega
- Date: 2018
- Subjects: Construction industry -- Health aspects -- Lagos -- Nigeria , Industrial safety -- Lagos -- Nigeria Sustainable construction -- Lagos -- Nigeria
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/30962 , vital:31235
- Description: The construction sector is known for its poor health and safety (H&S) record. This situation contributes to the poor performance of construction projects and poor worker productivity. In view of this, the research was undertaken to improve workers’ H&S practices. This study determined how the systems thinking approach will mitigate unhealthy and unsafe construction practices in Lagos, Nigeria by developing interventions, and proposing a model for improved H&S practices. The study utilised a mixed research method approach. Both quantitative and qualitative methods were used specifically the concurrent embedded method to obtain and analyse the data. The sample size for the quantitative study was 375 respondents and a total of 40 respondents were engaged in the qualitative study. The sample consisted of designers, contractors, clients, quantity surveyors, project managers, construction managers, supervisors, and construction workers (masons, carpenters, painters, roofers, electricians) based in Lagos, Nigeria. The findings reveal that there is inadequate consideration for H&S during the procurement of construction projects. Furthermore, the absence of H&S regulations relating to the construction sector was observed. Unsafe practices at construction sites in Nigeria can be attributed to this discovery. The study reveals that the regulatory system, the organisation, the individual and the work environment all have an impact on H&S work practices. Although the contractors are mainly responsible for H&S at construction sites, other construction stakeholders (such as clients, consultants, etc.) influence H&S practices. The findings highlight the need for the adoption of a holistic approach to facilitate improvement in H&S practices on construction sites. The research has contributed to the body of knowledge by developing a framework for improving workers’ H&S performance on construction sites.
- Full Text:
- Date Issued: 2018
- Authors: Kukoyi, Patricia Omega
- Date: 2018
- Subjects: Construction industry -- Health aspects -- Lagos -- Nigeria , Industrial safety -- Lagos -- Nigeria Sustainable construction -- Lagos -- Nigeria
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/30962 , vital:31235
- Description: The construction sector is known for its poor health and safety (H&S) record. This situation contributes to the poor performance of construction projects and poor worker productivity. In view of this, the research was undertaken to improve workers’ H&S practices. This study determined how the systems thinking approach will mitigate unhealthy and unsafe construction practices in Lagos, Nigeria by developing interventions, and proposing a model for improved H&S practices. The study utilised a mixed research method approach. Both quantitative and qualitative methods were used specifically the concurrent embedded method to obtain and analyse the data. The sample size for the quantitative study was 375 respondents and a total of 40 respondents were engaged in the qualitative study. The sample consisted of designers, contractors, clients, quantity surveyors, project managers, construction managers, supervisors, and construction workers (masons, carpenters, painters, roofers, electricians) based in Lagos, Nigeria. The findings reveal that there is inadequate consideration for H&S during the procurement of construction projects. Furthermore, the absence of H&S regulations relating to the construction sector was observed. Unsafe practices at construction sites in Nigeria can be attributed to this discovery. The study reveals that the regulatory system, the organisation, the individual and the work environment all have an impact on H&S work practices. Although the contractors are mainly responsible for H&S at construction sites, other construction stakeholders (such as clients, consultants, etc.) influence H&S practices. The findings highlight the need for the adoption of a holistic approach to facilitate improvement in H&S practices on construction sites. The research has contributed to the body of knowledge by developing a framework for improving workers’ H&S performance on construction sites.
- Full Text:
- Date Issued: 2018
Management of material waste and cost overrun in the Nigerian construction industry
- Authors: Saidu, Ibrahim
- Date: 2016
- Subjects: Construction industry -- Materials management -- Nigeria , Construction industry -- Nigeria -- Management
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/48937 , vital:41507
- Description: While wastage of materials has become a serious problem requiring urgent attention in the Nigerian Construction Industry, cost overrun is a problem, which affects 90 percent of the completed projects in the world; the argument on how to reduce/eliminate cost overrun has been on-going for the past 70 years; as the on-site wastage of materials leads to increases in the final project cost. Studies from different parts of the world have shown that construction-material waste represents a relatively large percentage of the production costs. Consequently, as a result of low levels of awareness, the Nigerian construction industry pays little attention to the effects of generated material waste on cost overruns. Thus, this research aimed to investigate the relationship between material waste and cost overrun in the Nigerian construction industry. A comprehensive review of the related literature revealed that all material waste causes are related to cost overrun causes at both pre-contract and post-contract stages of a project; but not vice versa. The mixed method (quantitative and qualitative) approach that is rooted in the positivist paradigm was adopted for this study. Abuja, the federal capital territory of Nigeria was the selected geographical scope of this research, out of which thirty-one (31) construction projects were purposeful selected (projects to the value of 100 million Rand/1.6 billion Naira and above).The research instrument was an interview guide used in conjunction with a tick box. Other sources of data included field investigation (measurement of onsite material waste) and the collection of archival records from bills of quantities, project records, and specifications. Analyses of the findings lead to the conclusion that a relationship exists between material waste and cost overrun; at the pre-contract and at the post-contract stages of a project. The implication is that an increase in material wastage on-site leads to a corresponding increase in the amount of cost overrun, regardless of the percentage allowance for material waste in the process of bill preparation. The study also concluded that the average percentage contribution of material waste to project-cost overruns is four (4) percent. Material-waste sources, causes, and control measures were found to have significant effects (very high, high, medium, low, and very low), in causing or minimising cost overruns at both pre-contract and post-contract stages of projects. The research has developed a conceptual model for the management of material waste and cost overruns in the construction industry based on the results and informed by the theoretical framework. The research has also developed a mathematical model for quantifying the amount of material waste to be generated by a project; as well as a mathematical equation for the effective management of material waste and cost overrun for projects. The study has achieved its aim of establishing an understanding of the issues leading to the relationship between material waste and cost overruns, as well as their management in the Nigerian construction industry. The study recommends that the management of material waste and cost overrun should be revised, based on the findings of this research and included as part of the procurement process. The mathematical models for quantification of onsite material waste, and the mathematical equation for managing material waste and cost overruns developed in the study, could be usefully adopted to improve management of material waste and cost overrun in the Nigerian construction industry.
- Full Text:
- Date Issued: 2016
- Authors: Saidu, Ibrahim
- Date: 2016
- Subjects: Construction industry -- Materials management -- Nigeria , Construction industry -- Nigeria -- Management
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/48937 , vital:41507
- Description: While wastage of materials has become a serious problem requiring urgent attention in the Nigerian Construction Industry, cost overrun is a problem, which affects 90 percent of the completed projects in the world; the argument on how to reduce/eliminate cost overrun has been on-going for the past 70 years; as the on-site wastage of materials leads to increases in the final project cost. Studies from different parts of the world have shown that construction-material waste represents a relatively large percentage of the production costs. Consequently, as a result of low levels of awareness, the Nigerian construction industry pays little attention to the effects of generated material waste on cost overruns. Thus, this research aimed to investigate the relationship between material waste and cost overrun in the Nigerian construction industry. A comprehensive review of the related literature revealed that all material waste causes are related to cost overrun causes at both pre-contract and post-contract stages of a project; but not vice versa. The mixed method (quantitative and qualitative) approach that is rooted in the positivist paradigm was adopted for this study. Abuja, the federal capital territory of Nigeria was the selected geographical scope of this research, out of which thirty-one (31) construction projects were purposeful selected (projects to the value of 100 million Rand/1.6 billion Naira and above).The research instrument was an interview guide used in conjunction with a tick box. Other sources of data included field investigation (measurement of onsite material waste) and the collection of archival records from bills of quantities, project records, and specifications. Analyses of the findings lead to the conclusion that a relationship exists between material waste and cost overrun; at the pre-contract and at the post-contract stages of a project. The implication is that an increase in material wastage on-site leads to a corresponding increase in the amount of cost overrun, regardless of the percentage allowance for material waste in the process of bill preparation. The study also concluded that the average percentage contribution of material waste to project-cost overruns is four (4) percent. Material-waste sources, causes, and control measures were found to have significant effects (very high, high, medium, low, and very low), in causing or minimising cost overruns at both pre-contract and post-contract stages of projects. The research has developed a conceptual model for the management of material waste and cost overruns in the construction industry based on the results and informed by the theoretical framework. The research has also developed a mathematical model for quantifying the amount of material waste to be generated by a project; as well as a mathematical equation for the effective management of material waste and cost overrun for projects. The study has achieved its aim of establishing an understanding of the issues leading to the relationship between material waste and cost overruns, as well as their management in the Nigerian construction industry. The study recommends that the management of material waste and cost overrun should be revised, based on the findings of this research and included as part of the procurement process. The mathematical models for quantification of onsite material waste, and the mathematical equation for managing material waste and cost overruns developed in the study, could be usefully adopted to improve management of material waste and cost overrun in the Nigerian construction industry.
- Full Text:
- Date Issued: 2016
Cost and reward as motivating factors in distributed collaborative learning assignments : a grounded theory analasis
- Van Niekerk, Johanna Cornelia
- Authors: Van Niekerk, Johanna Cornelia
- Date: 2009
- Subjects: Group work in education -- South Africa , Team learning approach in education -- South Africa , Education -- Experimental methods
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9764 , http://hdl.handle.net/10948/1103 , Group work in education -- South Africa , Team learning approach in education -- South Africa , Education -- Experimental methods
- Description: The objective of this research study was to obtain a better understanding of the factors that affect lecturer and student participation in distributed collaborative learning assignments (DCLAs). A substantial number of courses worldwide have included DCLAs in their curricula in an attempt to teach students virtual communication and teaming skills, and to allow distributed students to learn course content collaboratively in a virtual environment. The execution and management of these assignments have proven to be more challenging that expected. Several attempts reported on in the literature had to be abandoned when cost exceeded the rewards for both lecturers and students. In a fouryear cyclical action research project carried out at the PETech (Port Elizabeth Technikon, currently part of the Nelson Mandela Metropolitan University, South Africa), ICT students at several of the PETech campuses were required to complete a DCLA in virtual teams. This project also had to be terminated when it was realised that virtual team learning was minimal and the time investment unacceptably high. For the research study reported on in this thesis the data collected during the four “preresearch” cycles and the experiences reported in the literature were analysed. The lessons learnt were applied to a new additional DCLA cycle which formed part of an ICT course, although this execution still showed room for improvement. A second additional cycle was then executed which had a high participation rate and was overwhelmingly labelled by the participating students as a valuable and enjoyable learning experience. Analysis of the factors affecting participation in DCLAs shows that they are numerous and tightly interlinked, and that each factor is able to take on a wide range of values. This complicates descriptive reporting as each of the DCLAs was unique with unique outcomes and would have to be reported as such in order to iii ABSTRACT iv gain an understanding of the factors. Hence, a level of abstraction was needed, which was accomplished by applying the traditional Glaserian grounded theory method to the data collected during the four “preresearch” and the two additional cycles, and from the literature on the topic. The outcome is a perceived costs and rewards (PCR) theory for participation in DCLAs. As participation is crucial for the learning experience of each student as well as his/her team members in an action learning environment, deciding on participation by continually calculating the costs versus rewards became the focal point of the theory. To the best of the author’s knowledge this research study makes a theoretical contribution to the existing body of ICT educational knowledge in the form of a perceived costs and rewards theory for DCLA participation and a practical contribution in that it provides a theory that can be used to explain, understand, interpret and predict participation in DCLAs. This research study provides guidance for future research in both of these areas.
- Full Text:
- Date Issued: 2009
- Authors: Van Niekerk, Johanna Cornelia
- Date: 2009
- Subjects: Group work in education -- South Africa , Team learning approach in education -- South Africa , Education -- Experimental methods
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9764 , http://hdl.handle.net/10948/1103 , Group work in education -- South Africa , Team learning approach in education -- South Africa , Education -- Experimental methods
- Description: The objective of this research study was to obtain a better understanding of the factors that affect lecturer and student participation in distributed collaborative learning assignments (DCLAs). A substantial number of courses worldwide have included DCLAs in their curricula in an attempt to teach students virtual communication and teaming skills, and to allow distributed students to learn course content collaboratively in a virtual environment. The execution and management of these assignments have proven to be more challenging that expected. Several attempts reported on in the literature had to be abandoned when cost exceeded the rewards for both lecturers and students. In a fouryear cyclical action research project carried out at the PETech (Port Elizabeth Technikon, currently part of the Nelson Mandela Metropolitan University, South Africa), ICT students at several of the PETech campuses were required to complete a DCLA in virtual teams. This project also had to be terminated when it was realised that virtual team learning was minimal and the time investment unacceptably high. For the research study reported on in this thesis the data collected during the four “preresearch” cycles and the experiences reported in the literature were analysed. The lessons learnt were applied to a new additional DCLA cycle which formed part of an ICT course, although this execution still showed room for improvement. A second additional cycle was then executed which had a high participation rate and was overwhelmingly labelled by the participating students as a valuable and enjoyable learning experience. Analysis of the factors affecting participation in DCLAs shows that they are numerous and tightly interlinked, and that each factor is able to take on a wide range of values. This complicates descriptive reporting as each of the DCLAs was unique with unique outcomes and would have to be reported as such in order to iii ABSTRACT iv gain an understanding of the factors. Hence, a level of abstraction was needed, which was accomplished by applying the traditional Glaserian grounded theory method to the data collected during the four “preresearch” and the two additional cycles, and from the literature on the topic. The outcome is a perceived costs and rewards (PCR) theory for participation in DCLAs. As participation is crucial for the learning experience of each student as well as his/her team members in an action learning environment, deciding on participation by continually calculating the costs versus rewards became the focal point of the theory. To the best of the author’s knowledge this research study makes a theoretical contribution to the existing body of ICT educational knowledge in the form of a perceived costs and rewards theory for DCLA participation and a practical contribution in that it provides a theory that can be used to explain, understand, interpret and predict participation in DCLAs. This research study provides guidance for future research in both of these areas.
- Full Text:
- Date Issued: 2009
Understanding factors that influence the acceptance of electronic medical records by nurses in hospitals: a framework
- Authors: Makalima, Melissa
- Date: 2018
- Subjects: Electronic records -- Management , Information storage and retrieval systems -- Management Medical records -- South Africa Medical records -- Data processing
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/31488 , vital:31495
- Description: Globally, unlike in the past, it is rare for a patient to consult the same healthcare provider throughout his or her lifetime. However, this makes it difficult to maintain informational continuity of care. Researchers have confirmed that paper-based methods of record keeping do not meet the needs of informational continuity of care. As a result, the popularity of electronic means of recordkeeping, specifically, electronic medical records (EMRs), is growing. However, the implementation of EMRs in hospitals is not without challenges with these challenges playing a significant role in the failure of EMRs. One such challenge is a lack of user acceptance. Research reveals that nurses comprise the largest user group of EMRs in the hospital setting. However, there is inadequate literature that focuses on the factors contributing to EMR acceptance with nurses as the user group. Hence, the main problem addressed in this research study relates to the inadequate understanding of the factors that influence the acceptance of EMRs by nurses. In order to address this problem, a literature review and a case study were conducted to ascertain and investigate the factors that influence the acceptance of EMRs by nurses. A total of 39 factors were formulated. Subsequent to the formulation of these factors, knowledge on the impact of each factor on EMR acceptance was collected. Socio-technical Systems Theory (STS) was used as a theoretical lens through which to view the resulting factors. The STS dimension from which each factor originates as well as the STS dimension influenced by the factor were identified. The analysis of the different stages of acceptance as well as the STS analysis resulted in a framework that could play an important role in providing a better understanding of EMR acceptance by nurses in hospitals. It was anticipated that this study would contribute to a better understanding of the factors that hospitals should address in order to create a conducive environment for EMR acceptance by nurses within the hospitals.
- Full Text:
- Date Issued: 2018
- Authors: Makalima, Melissa
- Date: 2018
- Subjects: Electronic records -- Management , Information storage and retrieval systems -- Management Medical records -- South Africa Medical records -- Data processing
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/31488 , vital:31495
- Description: Globally, unlike in the past, it is rare for a patient to consult the same healthcare provider throughout his or her lifetime. However, this makes it difficult to maintain informational continuity of care. Researchers have confirmed that paper-based methods of record keeping do not meet the needs of informational continuity of care. As a result, the popularity of electronic means of recordkeeping, specifically, electronic medical records (EMRs), is growing. However, the implementation of EMRs in hospitals is not without challenges with these challenges playing a significant role in the failure of EMRs. One such challenge is a lack of user acceptance. Research reveals that nurses comprise the largest user group of EMRs in the hospital setting. However, there is inadequate literature that focuses on the factors contributing to EMR acceptance with nurses as the user group. Hence, the main problem addressed in this research study relates to the inadequate understanding of the factors that influence the acceptance of EMRs by nurses. In order to address this problem, a literature review and a case study were conducted to ascertain and investigate the factors that influence the acceptance of EMRs by nurses. A total of 39 factors were formulated. Subsequent to the formulation of these factors, knowledge on the impact of each factor on EMR acceptance was collected. Socio-technical Systems Theory (STS) was used as a theoretical lens through which to view the resulting factors. The STS dimension from which each factor originates as well as the STS dimension influenced by the factor were identified. The analysis of the different stages of acceptance as well as the STS analysis resulted in a framework that could play an important role in providing a better understanding of EMR acceptance by nurses in hospitals. It was anticipated that this study would contribute to a better understanding of the factors that hospitals should address in order to create a conducive environment for EMR acceptance by nurses within the hospitals.
- Full Text:
- Date Issued: 2018
A model for enhancing trust in South African automotive supply chains through information technology
- Authors: Piderit, Roxanne
- Date: 2012
- Subjects: Automobile supplies industry -- South Africa , Automobiles -- Technological innovations , Business logistics -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9793 , http://hdl.handle.net/10948/d1011851 , Automobile supplies industry -- South Africa , Automobiles -- Technological innovations , Business logistics -- South Africa
- Description: The South African automotive industry is recognised as an important sector for the economy and has thus been prioritised by the South African government. The success of the automotive manufacturers depends on the efficiency and effectiveness of their supply chain. Due to the large number of suppliers involved in these supply chains, enhancing trust in the inter-organisational relationships can ensure the competitiveness of the supply chain. Additionally, insufficient trust can disrupt information sharing between supply chain partners which further impacts on supply chain operations and hence supply chain competitiveness. Thus, both insufficient trust and insufficient information sharing are viewed as contributing factors to the inefficiency and ineffectiveness of a supply chain’s operations. The use of Information Technology to facilitate inter-organisational relationships, in particular in terms of improving information sharing, is an important consideration in this research project. As in the Prisoner’s Dilemma, when supply chain members share information freely, trust levels are increased, hence supply chain effectiveness and efficiency is achieved and therefore the competitiveness of the supply chain is optimised. This study addresses the problem of enhancing trust in automotive supply chains using Information Technology. Previous studies have recognised the importance of trust and information sharing in supply chain relationships. These previous studies have also considered the effect of trust on information sharing, or the effect of information sharing on trust in a single direction. Thus, to address this research problem, a cyclical relationship between trust and information sharing is proposed. In this respect, Information Technology should be used to nurture this cyclical relationship between trust and information sharing. A model for the enhancement of trust in automotive supply chains through Information Technology is proposed to achieve the objectives of this research project. This model includes risk perception; information sharing as a means of enhancing trust; a trust area that consists of both supply chain partner trustworthiness and system trust; the resultant trusting behaviour; and the resultant improved information sharing. As this study is concerned with the use of IT to enhance trust, the inclusion of system trust as a component of the model is a significant contribution of this study which is complementary to the proposed cyclical relationship between trust and information sharing.
- Full Text:
- Date Issued: 2012
A model for enhancing trust in South African automotive supply chains through information technology
- Authors: Piderit, Roxanne
- Date: 2012
- Subjects: Automobile supplies industry -- South Africa , Automobiles -- Technological innovations , Business logistics -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9793 , http://hdl.handle.net/10948/d1011851 , Automobile supplies industry -- South Africa , Automobiles -- Technological innovations , Business logistics -- South Africa
- Description: The South African automotive industry is recognised as an important sector for the economy and has thus been prioritised by the South African government. The success of the automotive manufacturers depends on the efficiency and effectiveness of their supply chain. Due to the large number of suppliers involved in these supply chains, enhancing trust in the inter-organisational relationships can ensure the competitiveness of the supply chain. Additionally, insufficient trust can disrupt information sharing between supply chain partners which further impacts on supply chain operations and hence supply chain competitiveness. Thus, both insufficient trust and insufficient information sharing are viewed as contributing factors to the inefficiency and ineffectiveness of a supply chain’s operations. The use of Information Technology to facilitate inter-organisational relationships, in particular in terms of improving information sharing, is an important consideration in this research project. As in the Prisoner’s Dilemma, when supply chain members share information freely, trust levels are increased, hence supply chain effectiveness and efficiency is achieved and therefore the competitiveness of the supply chain is optimised. This study addresses the problem of enhancing trust in automotive supply chains using Information Technology. Previous studies have recognised the importance of trust and information sharing in supply chain relationships. These previous studies have also considered the effect of trust on information sharing, or the effect of information sharing on trust in a single direction. Thus, to address this research problem, a cyclical relationship between trust and information sharing is proposed. In this respect, Information Technology should be used to nurture this cyclical relationship between trust and information sharing. A model for the enhancement of trust in automotive supply chains through Information Technology is proposed to achieve the objectives of this research project. This model includes risk perception; information sharing as a means of enhancing trust; a trust area that consists of both supply chain partner trustworthiness and system trust; the resultant trusting behaviour; and the resultant improved information sharing. As this study is concerned with the use of IT to enhance trust, the inclusion of system trust as a component of the model is a significant contribution of this study which is complementary to the proposed cyclical relationship between trust and information sharing.
- Full Text:
- Date Issued: 2012