A comparison between the game and hunting industries in KwaZulu-Natal and the Eastern Cape
- Authors: Kobus, Louann
- Date: 2007
- Subjects: Big game hunting -- South Africa -- KwaZulu-Natal , Big game hunting -- South Africa -- Eastern Cape , Hunting -- South Africa -- KwaZulu-Natal , Hunting -- South Africa -- Eastern Cape , Game farms -- South Africa -- KwaZulu-Natal , Game farms -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10590 , http://hdl.handle.net/10948/534 , http://hdl.handle.net/10948/d1011724 , Big game hunting -- South Africa -- KwaZulu-Natal , Big game hunting -- South Africa -- Eastern Cape , Hunting -- South Africa -- KwaZulu-Natal , Hunting -- South Africa -- Eastern Cape , Game farms -- South Africa -- KwaZulu-Natal , Game farms -- South Africa -- Eastern Cape
- Description: The objectives of this research, were to investigate the characteristics and develop a profile of the game and hunting industries of KwaZulu-Natal, and to undertake a comparison between the game and hunting industries in KwaZulu-Natal and the Eastern Cape. The comparative part of this study was completed using results obtained from a study done in 2002 in the Eastern Cape (van Niekerk, 2002). The main farming activities in KwaZulu-Natal are large livestock production and sugar cane production. In recent years, private landowners in KwaZulu-Natal have undergone a transition from livestock production to game ranching due to the problems faced and the cost implications of the HIV epidemic, stock theft, difficulties faced with changes in the labour laws and the increasing number of land claims against farmers. Although the game and hunting industries are relatively young industries in KwaZulu-Natal they contribute significantly to the economy of the province. Not only is greater conservation of the biodiversity more effective in game ranching but it is also proving to yield great economic returns. The increase in game ranching in recent years is namely due to the monetary value placed on wildlife, the increased value in ecotourism and its value as an earner of foreign exchange, less dependency on unskilled labour than that of livestock farming and lower rates of animal loss through theft compared to that of livestock farming. In KwaZulu-Natal game numbers indicate that impala have the greatest population amongst the respondents, followed by nyala, blesbok, common reedbuck, kudu and blue wildebeest, whilst other game species occur in smaller numbers. Respondents in KwaZulu-Natal indicate that nyala is the largest economic earner for them followed by buffalo, whereas in the Eastern Cape (2002), kudu and springbok provide the greatest income for the province. In KwaZulu-Natal income generated from hunting is second to that of live game sales compared to the Eastern Cape (2002) where hunting is the most important form of game utilisation in terms of income generated. At the time of this study, respondents in KwaZulu-Natal reported an income of R 15 382 397 generated from live sales and R 13 561 459 from hunting. These respondents also indicated that the total value of game utilised annually was in excess of R 30 million. Although game utilisation is occurring on a sustainable basis, there is room for greater utilisation of some game species which, if undertaken correctly, can increase the revenue for the province significantly and also contribute positively to further sustainability of the game populations. KwaZulu-Natal’s competitive advantage is derived from the fact that there is an abundance of game on the ranches, quality trophy animals are available, the number of game species available for hunting and quality of service rendered to hunters by the professional hunters and ranch owners. This study has clearly shown that there is a need for further investigation into the game and hunting industries in KwaZulu-Natal.
- Full Text:
- Date Issued: 2007
- Authors: Kobus, Louann
- Date: 2007
- Subjects: Big game hunting -- South Africa -- KwaZulu-Natal , Big game hunting -- South Africa -- Eastern Cape , Hunting -- South Africa -- KwaZulu-Natal , Hunting -- South Africa -- Eastern Cape , Game farms -- South Africa -- KwaZulu-Natal , Game farms -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10590 , http://hdl.handle.net/10948/534 , http://hdl.handle.net/10948/d1011724 , Big game hunting -- South Africa -- KwaZulu-Natal , Big game hunting -- South Africa -- Eastern Cape , Hunting -- South Africa -- KwaZulu-Natal , Hunting -- South Africa -- Eastern Cape , Game farms -- South Africa -- KwaZulu-Natal , Game farms -- South Africa -- Eastern Cape
- Description: The objectives of this research, were to investigate the characteristics and develop a profile of the game and hunting industries of KwaZulu-Natal, and to undertake a comparison between the game and hunting industries in KwaZulu-Natal and the Eastern Cape. The comparative part of this study was completed using results obtained from a study done in 2002 in the Eastern Cape (van Niekerk, 2002). The main farming activities in KwaZulu-Natal are large livestock production and sugar cane production. In recent years, private landowners in KwaZulu-Natal have undergone a transition from livestock production to game ranching due to the problems faced and the cost implications of the HIV epidemic, stock theft, difficulties faced with changes in the labour laws and the increasing number of land claims against farmers. Although the game and hunting industries are relatively young industries in KwaZulu-Natal they contribute significantly to the economy of the province. Not only is greater conservation of the biodiversity more effective in game ranching but it is also proving to yield great economic returns. The increase in game ranching in recent years is namely due to the monetary value placed on wildlife, the increased value in ecotourism and its value as an earner of foreign exchange, less dependency on unskilled labour than that of livestock farming and lower rates of animal loss through theft compared to that of livestock farming. In KwaZulu-Natal game numbers indicate that impala have the greatest population amongst the respondents, followed by nyala, blesbok, common reedbuck, kudu and blue wildebeest, whilst other game species occur in smaller numbers. Respondents in KwaZulu-Natal indicate that nyala is the largest economic earner for them followed by buffalo, whereas in the Eastern Cape (2002), kudu and springbok provide the greatest income for the province. In KwaZulu-Natal income generated from hunting is second to that of live game sales compared to the Eastern Cape (2002) where hunting is the most important form of game utilisation in terms of income generated. At the time of this study, respondents in KwaZulu-Natal reported an income of R 15 382 397 generated from live sales and R 13 561 459 from hunting. These respondents also indicated that the total value of game utilised annually was in excess of R 30 million. Although game utilisation is occurring on a sustainable basis, there is room for greater utilisation of some game species which, if undertaken correctly, can increase the revenue for the province significantly and also contribute positively to further sustainability of the game populations. KwaZulu-Natal’s competitive advantage is derived from the fact that there is an abundance of game on the ranches, quality trophy animals are available, the number of game species available for hunting and quality of service rendered to hunters by the professional hunters and ranch owners. This study has clearly shown that there is a need for further investigation into the game and hunting industries in KwaZulu-Natal.
- Full Text:
- Date Issued: 2007
A comparison of the vulcanisation of Polyisoprene by a range of Thiuram Diulfides
- Authors: Van Rooyen, Jason Leigh
- Date: 2007
- Subjects: Vulcanization , Vulcanization accelerators
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10399 , http://hdl.handle.net/10948/733 , Vulcanization , Vulcanization accelerators
- Description: This study was initiated in an attempt to investigate dithiocarbamic acid accelerated sulfur vulcanisation. This was, however, found impossible due to the innate instability of dithiocarbamic acids. The focus of the study was then shifted toward thiuram disulfide accelerated sulfur vulcanisation, with emphasis being placed on a rate comparison. Three groups of accelerators were investigated, namely the aromatic, linear aliphatic and cyclic aliphatic thiuram disulfide adducts. The analysis methods that were employed were conventional rubber (cis-1,4-polyisoprene) techniques coupled to model (squalene) compound investigations. The data that was collected consisted of rheometrical torque vs. time data in the rubber system while the data obtained in the model compound study consisted of sulfur and accelerator concentration data as determined by means of high performance liquid chromatography (HPLC). The aromatic accelerators were synthesised in our labs by means of an addition reaction between the aromatic amine and CS2 in basic medium and subsequent oxidation with K3Fe(CN)6, all in a 1:1 molar ratio. The reaction yield was low due to the instability of the dithiocarbamate intermediates and a sluggish oxidation reaction. In the rate constant determination a first order mathematical approach was used for the rubber system as crosslinking is considered to roughly obey first order kinetics. The model compound data was also found to more accurately fit the first order rate law, with an initial slopes method also being applied to the system to determine secondary rate constants and relative rates for the system. The determination of vulcanisation rate constants in the cis-1,4-polyisoprene system was a success, while the rate data determined by means of the squalene model was more related to the rate of accelerator and sulfur consumption as opposed to the rate of crosslinking as is the case with the rubber rate data. The sulfur first order rate data mirrored the rate data derived from the rubber system more closely than the corresponding accelerator rate data, the relative rate data determined by means of initial slopes method, proved that the homolytic cleavage of thiuram disulfides and the subsequent formation of accelerator polysulfides were not limiting steps. This is seen in the similar relative rate data derived from both the raw sulfur and accelerator data in systems that exhibit vastly different vulcanisation rates. Squalene was deemed a suitable model for the cis-1,4-polyisoprene system, although one should consider the extent of charring and solution effects in the individual systems to account for possible incongruities that may be observed between the rubber and simulated system. The lack of agreement between the rubber and model compound rate constant data lies in the fact that the rate of crosslinking is not simplistically related to the rate at which accelerator and sulfur is consumed, this being especially true for the rate at which the accelerator is consumed. Thus the discussion over the acceleratory rates in the various accelerator systems was limited to observations made in the rubber system, with the model compound data was used exclusively to elucidate mechanistic processes. It was discovered that the groups of accelerators examined, namely linear, cyclic and aromatic thiuram disulfide adducts, produced vastly varied rate data. The aromatic thiuram disulfide adducts had only a slight acceleratory effect on the rate of vulcanisation as compared to the unaccelerated sulfur system. The morpholine adduct had a moderately larger rate of acceleration followed by tetramethyl and tetrethylthiuram disulfide, with N’N-dicyclopentamethylenethiuram disulfide having the fastest rate of acceleration.
- Full Text:
- Date Issued: 2007
- Authors: Van Rooyen, Jason Leigh
- Date: 2007
- Subjects: Vulcanization , Vulcanization accelerators
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10399 , http://hdl.handle.net/10948/733 , Vulcanization , Vulcanization accelerators
- Description: This study was initiated in an attempt to investigate dithiocarbamic acid accelerated sulfur vulcanisation. This was, however, found impossible due to the innate instability of dithiocarbamic acids. The focus of the study was then shifted toward thiuram disulfide accelerated sulfur vulcanisation, with emphasis being placed on a rate comparison. Three groups of accelerators were investigated, namely the aromatic, linear aliphatic and cyclic aliphatic thiuram disulfide adducts. The analysis methods that were employed were conventional rubber (cis-1,4-polyisoprene) techniques coupled to model (squalene) compound investigations. The data that was collected consisted of rheometrical torque vs. time data in the rubber system while the data obtained in the model compound study consisted of sulfur and accelerator concentration data as determined by means of high performance liquid chromatography (HPLC). The aromatic accelerators were synthesised in our labs by means of an addition reaction between the aromatic amine and CS2 in basic medium and subsequent oxidation with K3Fe(CN)6, all in a 1:1 molar ratio. The reaction yield was low due to the instability of the dithiocarbamate intermediates and a sluggish oxidation reaction. In the rate constant determination a first order mathematical approach was used for the rubber system as crosslinking is considered to roughly obey first order kinetics. The model compound data was also found to more accurately fit the first order rate law, with an initial slopes method also being applied to the system to determine secondary rate constants and relative rates for the system. The determination of vulcanisation rate constants in the cis-1,4-polyisoprene system was a success, while the rate data determined by means of the squalene model was more related to the rate of accelerator and sulfur consumption as opposed to the rate of crosslinking as is the case with the rubber rate data. The sulfur first order rate data mirrored the rate data derived from the rubber system more closely than the corresponding accelerator rate data, the relative rate data determined by means of initial slopes method, proved that the homolytic cleavage of thiuram disulfides and the subsequent formation of accelerator polysulfides were not limiting steps. This is seen in the similar relative rate data derived from both the raw sulfur and accelerator data in systems that exhibit vastly different vulcanisation rates. Squalene was deemed a suitable model for the cis-1,4-polyisoprene system, although one should consider the extent of charring and solution effects in the individual systems to account for possible incongruities that may be observed between the rubber and simulated system. The lack of agreement between the rubber and model compound rate constant data lies in the fact that the rate of crosslinking is not simplistically related to the rate at which accelerator and sulfur is consumed, this being especially true for the rate at which the accelerator is consumed. Thus the discussion over the acceleratory rates in the various accelerator systems was limited to observations made in the rubber system, with the model compound data was used exclusively to elucidate mechanistic processes. It was discovered that the groups of accelerators examined, namely linear, cyclic and aromatic thiuram disulfide adducts, produced vastly varied rate data. The aromatic thiuram disulfide adducts had only a slight acceleratory effect on the rate of vulcanisation as compared to the unaccelerated sulfur system. The morpholine adduct had a moderately larger rate of acceleration followed by tetramethyl and tetrethylthiuram disulfide, with N’N-dicyclopentamethylenethiuram disulfide having the fastest rate of acceleration.
- Full Text:
- Date Issued: 2007
A model for adaptive multimodal mobile notification
- Authors: Brander, William
- Date: 2007
- Subjects: Mobile computing , Context-aware computing
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10473 , http://hdl.handle.net/10948/699 , Mobile computing , Context-aware computing
- Description: Information is useless unless it is used whilst still applicable. Having a system that notifies the user of important messages using the most appropriate medium and device will benefit users that rely on time critical information. There are several existing systems and models for mobile notification as well as for adaptive mobile notification using context awareness. Current models and systems are typically designed for a specific set of mobile devices, modes and services. Communication however, can take place in many different modes, across many different devices and may originate from many different sources. The aim of this research was to develop a model for adaptive mobile notification using context awareness. An extensive literature study was performed into existing models for adaptive mobile notification systems using context awareness. The literature study identified several potential models but no way to evaluate and compare the models. A set of requirements to evaluate these models was developed and the models were evaluated against these criteria. The model satisfying the most requirements was adapted so as to satisfy the remaining criteria. The proposed model is extensible in terms of the modes, devices and notification sources supported. The proposed model determines the importance of a message, the appropriate device and mode (or modes) of communication based on the user‘s context, and alerts the user of the message using these modes. A prototype was developed as a proof-of-concept of the proposed model and evaluated by conducting an extensive field study. The field study highlighted the fact that most users did not choose the most suitable mode for the context during their initial subscription to the service. The field study also showed that more research needs to be done on an appropriate filtering mechanism for notifications. Users found that the notifications became intrusive and less useful the longer they used them.
- Full Text:
- Date Issued: 2007
- Authors: Brander, William
- Date: 2007
- Subjects: Mobile computing , Context-aware computing
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10473 , http://hdl.handle.net/10948/699 , Mobile computing , Context-aware computing
- Description: Information is useless unless it is used whilst still applicable. Having a system that notifies the user of important messages using the most appropriate medium and device will benefit users that rely on time critical information. There are several existing systems and models for mobile notification as well as for adaptive mobile notification using context awareness. Current models and systems are typically designed for a specific set of mobile devices, modes and services. Communication however, can take place in many different modes, across many different devices and may originate from many different sources. The aim of this research was to develop a model for adaptive mobile notification using context awareness. An extensive literature study was performed into existing models for adaptive mobile notification systems using context awareness. The literature study identified several potential models but no way to evaluate and compare the models. A set of requirements to evaluate these models was developed and the models were evaluated against these criteria. The model satisfying the most requirements was adapted so as to satisfy the remaining criteria. The proposed model is extensible in terms of the modes, devices and notification sources supported. The proposed model determines the importance of a message, the appropriate device and mode (or modes) of communication based on the user‘s context, and alerts the user of the message using these modes. A prototype was developed as a proof-of-concept of the proposed model and evaluated by conducting an extensive field study. The field study highlighted the fact that most users did not choose the most suitable mode for the context during their initial subscription to the service. The field study also showed that more research needs to be done on an appropriate filtering mechanism for notifications. Users found that the notifications became intrusive and less useful the longer they used them.
- Full Text:
- Date Issued: 2007
An analysis of the influence of phosphorus poisoning on the exhaust emission after treatement systems of light-duty diesel vehicles
- Authors: Toral del Rio, Maria Isabel
- Date: 2007
- Subjects: Diesel motor -- Alternative fuels , Automobiles -- Pollution control devices , Automobiles -- Motors -- Exhaust gas , Motor fuels
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10405 , http://hdl.handle.net/10948/697 , Diesel motor -- Alternative fuels , Automobiles -- Pollution control devices , Automobiles -- Motors -- Exhaust gas , Motor fuels
- Description: Climate change has become a discussion topic of exponentially increasing urgency and importance amoung world leaders of all disciplines. These changes are brought about by the emission of so-called Greenhouse gases from various human activities. The primary cause of CO2 emissions is the burning of the Earth’s supply of nonrenewable natural fossil fuels like coal, oil and natural gas. The world first agreed on the prevention of “dangerous” climatic changes at the Earth Summit in 1992. The Kyoto Protocol of 1997 was the first step toward protection of the atmosphere and prescribes restrictions on emission pollutants. Since then the vehicle gas emissions are being controlled by means of different gas emissions norms, like the European Union Norm in Europe. The automotive manufacturers and suppliers are collectively working on reducing overall vehicle emissions. They are focusing on several different emission limiting possibilities, for example improved engine design, special fuel development and exhaust gas treatment systems. The exhaust gas treatment process requires continuous controlling and management of the exhaust gas emissions while driving a vehicle. Certain factors such as high emission temperatures have a negative influence on the life span of these systems. Their functionality and durability is also known to be reduced by the presence of chemical poisoning species like sulphur, phosphorus, zinc and calcium. The chemical poisoning species are produced during combustion of fuel and engine oil. They are therefore contained in the exhaust emissions and can poison the catalyst when passing over it. Phosphorous poisoning is particularly problematic and should be reduced considerably. This study involves the investigation of the phosphorous poisoning process and aims to provide clarity regarding the influences of different fuel and oil compositions on the severity of the process. Engine oil and biodiesel are two major sources of phosphorous poisoning. The phosphorus contained in biodiesel fuel is a natural component and can be minimized during the refining procedure. In contrast to others studies, the biodiesel fuel used during this project was SME (Soya Methyl Ester) with a 20% biodiesel content. This choice of fuel was made because of the increasingly important role that this type of biodiesel is playing in the European market and the future tendency to increase the percentage of biodiesel in the mixture with standard diesel fuel. The phosphorus contained in engine oil is a necessary additive to retain the antioxidant and anti-wear properties of the oil. This study examined the poisoning influences from the most commonly used phosphorus containing oil additive, Zinc Dithiophosphates (ZDDP), as well as a Zn-free, phosphorus containing anti-wear oil additive. This formulation provides information about the phosphorus poisoning process as caused by the engine oil in the absence of Zn in the oil additives. The results show how the phosphorus content in biodiesel fuel affects the functionality of the exhaust gas treatment systems and the importance of reducing the permitted content of phosphorus contained in the fuel. Reducing the phosphorus content in the fuel will conserve the functionality of the exhaust gas treatment systems during their operational life and thereby protect the environmental from emission pollutants. It also provides insight into the differences in the poisoning processes when the phosphorus deposited on the catalyst comes from biodiesel fuel and when it comes from the engine oil. Finally the results also illustrate the influence of different phosphorous forms contained in engine oil additives on the catalyst poisoning process. This information could be used for the development of new oil additive formulations.
- Full Text:
- Date Issued: 2007
- Authors: Toral del Rio, Maria Isabel
- Date: 2007
- Subjects: Diesel motor -- Alternative fuels , Automobiles -- Pollution control devices , Automobiles -- Motors -- Exhaust gas , Motor fuels
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10405 , http://hdl.handle.net/10948/697 , Diesel motor -- Alternative fuels , Automobiles -- Pollution control devices , Automobiles -- Motors -- Exhaust gas , Motor fuels
- Description: Climate change has become a discussion topic of exponentially increasing urgency and importance amoung world leaders of all disciplines. These changes are brought about by the emission of so-called Greenhouse gases from various human activities. The primary cause of CO2 emissions is the burning of the Earth’s supply of nonrenewable natural fossil fuels like coal, oil and natural gas. The world first agreed on the prevention of “dangerous” climatic changes at the Earth Summit in 1992. The Kyoto Protocol of 1997 was the first step toward protection of the atmosphere and prescribes restrictions on emission pollutants. Since then the vehicle gas emissions are being controlled by means of different gas emissions norms, like the European Union Norm in Europe. The automotive manufacturers and suppliers are collectively working on reducing overall vehicle emissions. They are focusing on several different emission limiting possibilities, for example improved engine design, special fuel development and exhaust gas treatment systems. The exhaust gas treatment process requires continuous controlling and management of the exhaust gas emissions while driving a vehicle. Certain factors such as high emission temperatures have a negative influence on the life span of these systems. Their functionality and durability is also known to be reduced by the presence of chemical poisoning species like sulphur, phosphorus, zinc and calcium. The chemical poisoning species are produced during combustion of fuel and engine oil. They are therefore contained in the exhaust emissions and can poison the catalyst when passing over it. Phosphorous poisoning is particularly problematic and should be reduced considerably. This study involves the investigation of the phosphorous poisoning process and aims to provide clarity regarding the influences of different fuel and oil compositions on the severity of the process. Engine oil and biodiesel are two major sources of phosphorous poisoning. The phosphorus contained in biodiesel fuel is a natural component and can be minimized during the refining procedure. In contrast to others studies, the biodiesel fuel used during this project was SME (Soya Methyl Ester) with a 20% biodiesel content. This choice of fuel was made because of the increasingly important role that this type of biodiesel is playing in the European market and the future tendency to increase the percentage of biodiesel in the mixture with standard diesel fuel. The phosphorus contained in engine oil is a necessary additive to retain the antioxidant and anti-wear properties of the oil. This study examined the poisoning influences from the most commonly used phosphorus containing oil additive, Zinc Dithiophosphates (ZDDP), as well as a Zn-free, phosphorus containing anti-wear oil additive. This formulation provides information about the phosphorus poisoning process as caused by the engine oil in the absence of Zn in the oil additives. The results show how the phosphorus content in biodiesel fuel affects the functionality of the exhaust gas treatment systems and the importance of reducing the permitted content of phosphorus contained in the fuel. Reducing the phosphorus content in the fuel will conserve the functionality of the exhaust gas treatment systems during their operational life and thereby protect the environmental from emission pollutants. It also provides insight into the differences in the poisoning processes when the phosphorus deposited on the catalyst comes from biodiesel fuel and when it comes from the engine oil. Finally the results also illustrate the influence of different phosphorous forms contained in engine oil additives on the catalyst poisoning process. This information could be used for the development of new oil additive formulations.
- Full Text:
- Date Issued: 2007
An assessment of habitat suitability of the proposed Tyefu community game reserve in Ngqushwa (fomerly Peddie) district, Eastern Cape
- Authors: Mamfengu, Phozisa Faith
- Date: 2007
- Subjects: Game farms -- South Africa -- Eastern Cape -- Management , Habitat (Ecology) , Eastern Cape (South Africa) -- Social conditions
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10653 , http://hdl.handle.net/10948/736 , Game farms -- South Africa -- Eastern Cape -- Management , Habitat (Ecology) , Eastern Cape (South Africa) -- Social conditions
- Description: Land use forms such as cultivation and livestock farming have become less productive and unsustainable in the Tyefu communal villages of Ngqushwa (Formerly Peddie) district, Eastern Cape, South Africa. This is manifest in abandoned and severely degraded cultivation fields as well as transformed vegetation, making it difficult to earn a land based livelihood. Against the backdrop of severe land degradation and poverty levels in these communal villages, game farming has been recommended as an ecologically, economically and socially sustainable form of land use. Tyefu Community Reserve is a project, recommended by the Subtropical Thicket Ecosystem Project (STEP) backed by the Department of Environment Affairs and Tourism (DEAT), for hunting and venison selling. The proposed area has been fenced and animals to be stocked in the reserve have been requested on a loan basis. Such an undertaking requires an understanding of the abundance and condition of vegetation, terrain parameters, and an assessment of potential wildlife species, as well as the carrying capacity of the recommended reserve as a habitat. With the aid of orthophoto maps, Subtropical Thicket Ecosystem Planning (STEP) shapefiles, ASTER satellite imagery and a High Resolution Digital Camera Image, vegetation types were mapped and their condition was assessed. A Digital Elevation Model (DEM) of the area was used to extract terrain parameters such as slope and aspect. The carrying capacity of the proposed reserve was determined using a model originally developed by Boshoff et al. (2001) for estimating potential wildlife and abundance. The proposed reserve is predominantly covered by dense thicket as compared to the adjacent Tyefu communal villages where thicket has been severely degraded. The prominent topographic characteristics such as slope reveal an escarpment ringing the proposed reserve with gentle slopes towards the centre. Slope direction has also influenced the distribution of vegetation in the proposed reserve, as the moist south facing slopes tend to have a greater proportion of dense thicket as opposed to the warm north facing slopes. Vegetation types and topography of the reserve can provide suitable habitat to a variety of wildlife species and are likely to influence the distribution of mammals in the proposed reserve. The carrying capacity model developed has been useful in determining potential species that can be supported by the reserve, and estimating their abundance. Given the small size of the proposed community reserve (about 1800ha), it has been recommended that it should be stretched to link up with the existing Great Fish River Game Complex. It will then fit within the framework as envisaged by STEP (2004), in the form of Fish River Biodiversity Initiative, a conservation corridor bordering the Great Fish River.
- Full Text:
- Date Issued: 2007
- Authors: Mamfengu, Phozisa Faith
- Date: 2007
- Subjects: Game farms -- South Africa -- Eastern Cape -- Management , Habitat (Ecology) , Eastern Cape (South Africa) -- Social conditions
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10653 , http://hdl.handle.net/10948/736 , Game farms -- South Africa -- Eastern Cape -- Management , Habitat (Ecology) , Eastern Cape (South Africa) -- Social conditions
- Description: Land use forms such as cultivation and livestock farming have become less productive and unsustainable in the Tyefu communal villages of Ngqushwa (Formerly Peddie) district, Eastern Cape, South Africa. This is manifest in abandoned and severely degraded cultivation fields as well as transformed vegetation, making it difficult to earn a land based livelihood. Against the backdrop of severe land degradation and poverty levels in these communal villages, game farming has been recommended as an ecologically, economically and socially sustainable form of land use. Tyefu Community Reserve is a project, recommended by the Subtropical Thicket Ecosystem Project (STEP) backed by the Department of Environment Affairs and Tourism (DEAT), for hunting and venison selling. The proposed area has been fenced and animals to be stocked in the reserve have been requested on a loan basis. Such an undertaking requires an understanding of the abundance and condition of vegetation, terrain parameters, and an assessment of potential wildlife species, as well as the carrying capacity of the recommended reserve as a habitat. With the aid of orthophoto maps, Subtropical Thicket Ecosystem Planning (STEP) shapefiles, ASTER satellite imagery and a High Resolution Digital Camera Image, vegetation types were mapped and their condition was assessed. A Digital Elevation Model (DEM) of the area was used to extract terrain parameters such as slope and aspect. The carrying capacity of the proposed reserve was determined using a model originally developed by Boshoff et al. (2001) for estimating potential wildlife and abundance. The proposed reserve is predominantly covered by dense thicket as compared to the adjacent Tyefu communal villages where thicket has been severely degraded. The prominent topographic characteristics such as slope reveal an escarpment ringing the proposed reserve with gentle slopes towards the centre. Slope direction has also influenced the distribution of vegetation in the proposed reserve, as the moist south facing slopes tend to have a greater proportion of dense thicket as opposed to the warm north facing slopes. Vegetation types and topography of the reserve can provide suitable habitat to a variety of wildlife species and are likely to influence the distribution of mammals in the proposed reserve. The carrying capacity model developed has been useful in determining potential species that can be supported by the reserve, and estimating their abundance. Given the small size of the proposed community reserve (about 1800ha), it has been recommended that it should be stretched to link up with the existing Great Fish River Game Complex. It will then fit within the framework as envisaged by STEP (2004), in the form of Fish River Biodiversity Initiative, a conservation corridor bordering the Great Fish River.
- Full Text:
- Date Issued: 2007
An intelligent user interface model for contact centre operations
- Authors: Singh, Akash
- Date: 2007
- Subjects: User interfaces (Computer systems) , Human-computer interaction , Mobile computing , Customer services -- Management , Call centers -- Customer services
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10475 , http://hdl.handle.net/10948/d1011399 , User interfaces (Computer systems) , Human-computer interaction , Mobile computing , Customer services -- Management , Call centers -- Customer services
- Description: Contact Centres (CCs) are at the forefront of interaction between an organisation and its customers. Currently, 17 percent of all inbound calls are not resolved on the first call by the first agent attending to that call. This is due to the inability of the contact centre agents (CCAs) to diagnose customer queries and find adequate solutions in an effective and efficient manner. The aim of this research is to develop an intelligent user interface (IUI) model to support and improve CC operations. A literature review of existing IUI architectures, modelbased design and existing CC software together with a field study of CCs has resulted in the design of an IUI model for CCs. The proposed IUI model is described in terms of its architecture, component-level design and interface design. An IUI prototype has been developed as a proof of concept of the proposed IUI model. The IUI prototype was evaluated in order to determine to what extent it supports problem identification and query resolution. User testing, incorporating the use of eye tracking and a post-test questionnaire, was used in order to determine the usability and usefulness of the prototype. The results of this evaluation show that the users were highly satisfied with the task support and query resolution assistance provided by the IUI prototype. This research resulted in the design of an IUI model for the domain of CCs. This model can be used to assist the development of CC applications incorporating IUIs. Use of the proposed IUI model is expected to support and enhance the effectiveness and efficiency of CC operations. Further research is needed to conduct a longitudinal study to determine the impact of IUIs in the CC domain.
- Full Text:
- Date Issued: 2007
- Authors: Singh, Akash
- Date: 2007
- Subjects: User interfaces (Computer systems) , Human-computer interaction , Mobile computing , Customer services -- Management , Call centers -- Customer services
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10475 , http://hdl.handle.net/10948/d1011399 , User interfaces (Computer systems) , Human-computer interaction , Mobile computing , Customer services -- Management , Call centers -- Customer services
- Description: Contact Centres (CCs) are at the forefront of interaction between an organisation and its customers. Currently, 17 percent of all inbound calls are not resolved on the first call by the first agent attending to that call. This is due to the inability of the contact centre agents (CCAs) to diagnose customer queries and find adequate solutions in an effective and efficient manner. The aim of this research is to develop an intelligent user interface (IUI) model to support and improve CC operations. A literature review of existing IUI architectures, modelbased design and existing CC software together with a field study of CCs has resulted in the design of an IUI model for CCs. The proposed IUI model is described in terms of its architecture, component-level design and interface design. An IUI prototype has been developed as a proof of concept of the proposed IUI model. The IUI prototype was evaluated in order to determine to what extent it supports problem identification and query resolution. User testing, incorporating the use of eye tracking and a post-test questionnaire, was used in order to determine the usability and usefulness of the prototype. The results of this evaluation show that the users were highly satisfied with the task support and query resolution assistance provided by the IUI prototype. This research resulted in the design of an IUI model for the domain of CCs. This model can be used to assist the development of CC applications incorporating IUIs. Use of the proposed IUI model is expected to support and enhance the effectiveness and efficiency of CC operations. Further research is needed to conduct a longitudinal study to determine the impact of IUIs in the CC domain.
- Full Text:
- Date Issued: 2007
An investigation into the learnability of object-oriented case tools for computing education
- Authors: Scholtz, Brenda Mary
- Date: 2007
- Subjects: Computer science -- Study and teaching , Object-oriented programming (Computer science) , ACSES (Computer system)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10476 , http://hdl.handle.net/10948/694 , Computer science -- Study and teaching , Object-oriented programming (Computer science) , ACSES (Computer system)
- Description: The use of Computer Aided Software Engineering (CASE) tools for teaching object-oriented systems analysis and design (OOSAD) has many potential benefits, but there are also several problems associated with the usage of these tools. A large portion of these problems relate to the usability and learnability of these tools. Learnability is one of the most important attributes of usability and refers to the capability of the system to enable the user to learn its application. The main research question that this study aims to address is “How can the learnability of OO CASE tools for computing education in South Africa be evaluated?”. In order to answer this question several frameworks for evaluating CASE tool usability and learnability were investigated. One of these frameworks, as proposed by Senapathi, was selected as being the most appropriate for evaluating CASE tool learnability for computing education. This framework maintains that the learnability of a CASE tool is dependent on context of use factors such as the tool used, as well as user characteristics such as gender. The primary aim of this research was thus to validate Senapathi's framework for CASE tool learnability in a South African context. A secondary aim of the research was to extend the implementation of the framework in order to enable the comparison of two CASE tools and to support the inclusion of other user characteristics. An experiment was performed at the Nelson Mandela Metropolitan University (NMMU) in 2006. The participants recruited for this experiment were second year computing students at NMMU. During this experiment, the learnability of two OO CASE tools, namely IBM's Rational Software Modeller and Microsoft's Visio, was evaluated and compared. The quantitative and qualitative results supported Senapathi's results and showed that her framework could be used to evaluate CASE tool learnability and could be adapted to evaluate two CASE tools. The results also showed that the majority of the participants rated the learnability of Microsoft Visio higher for both tasks and that the main reasons participants preferred Visio was due to its simplicity, familiarity and recoverability.
- Full Text:
- Date Issued: 2007
- Authors: Scholtz, Brenda Mary
- Date: 2007
- Subjects: Computer science -- Study and teaching , Object-oriented programming (Computer science) , ACSES (Computer system)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10476 , http://hdl.handle.net/10948/694 , Computer science -- Study and teaching , Object-oriented programming (Computer science) , ACSES (Computer system)
- Description: The use of Computer Aided Software Engineering (CASE) tools for teaching object-oriented systems analysis and design (OOSAD) has many potential benefits, but there are also several problems associated with the usage of these tools. A large portion of these problems relate to the usability and learnability of these tools. Learnability is one of the most important attributes of usability and refers to the capability of the system to enable the user to learn its application. The main research question that this study aims to address is “How can the learnability of OO CASE tools for computing education in South Africa be evaluated?”. In order to answer this question several frameworks for evaluating CASE tool usability and learnability were investigated. One of these frameworks, as proposed by Senapathi, was selected as being the most appropriate for evaluating CASE tool learnability for computing education. This framework maintains that the learnability of a CASE tool is dependent on context of use factors such as the tool used, as well as user characteristics such as gender. The primary aim of this research was thus to validate Senapathi's framework for CASE tool learnability in a South African context. A secondary aim of the research was to extend the implementation of the framework in order to enable the comparison of two CASE tools and to support the inclusion of other user characteristics. An experiment was performed at the Nelson Mandela Metropolitan University (NMMU) in 2006. The participants recruited for this experiment were second year computing students at NMMU. During this experiment, the learnability of two OO CASE tools, namely IBM's Rational Software Modeller and Microsoft's Visio, was evaluated and compared. The quantitative and qualitative results supported Senapathi's results and showed that her framework could be used to evaluate CASE tool learnability and could be adapted to evaluate two CASE tools. The results also showed that the majority of the participants rated the learnability of Microsoft Visio higher for both tasks and that the main reasons participants preferred Visio was due to its simplicity, familiarity and recoverability.
- Full Text:
- Date Issued: 2007
An investigation into the parameters affecting the stability of Dithane
- Authors: Williams, Nadia
- Date: 2007
- Subjects: Fungicides , Dithane
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10407 , http://hdl.handle.net/10948/645 , Fungicides , Dithane
- Description: Plant diseases caused by fungi are the number one cause of crop loss worldwide. The application of a fungicide which is a toxic substance applied either to prevent the growth of, or to kill fungi is one of the methods by which plant diseases are controlled. Ethylenebisdithiocarbamate fungicides are a group of surface acting fungicides which control a broad spectrum of fungi and their associated plant diseases. Mancozeb, also commonly known as Dithane, falls under the polymeric Dithiocarbamate fungicides which have several sites of toxicity to the fungal cell. The use of Mancozeb as a fungicide is increasing worldwide due to the advantages of low acute toxicity, low production and short environmental persistence. However, it has one major disadvantage, namely its lack of oxidative stability under ambient conditions. One of the objectives of this study was to characterize the Dithane samples supplied by Dow AgroSciences in terms of their active ingredient, metal and stabilizer content, and to study the thermal decomposition behaviour of Dithane. An attempt was made to correlate the active ingredient analyses with the TGA and DSC results to establish whether the thermal stability and active ingredient content of Dithane could be simultaneously determined by thermal analysis. This approach offered the attractive advantage of shorter analysis times thus allowing the elimination of the more tedious analytical methods employed by Dow AgroSciences. Furthermore, Fourier Transform infra-red characterization of Dithane samples and metal complexes containing HMT, Mn and/or Zn was carried out in order to identify the presence of functional groups and to gain some insight into the nature of the bonding of HMT, sulfate and water. A study of the nature of the bands in the FTIR spectra of these complexes was able to highlight the nature of the bonding but could not give confirmation of the structures of these complexes. In addition to this, the amount of HMT present in the said complexes was determined by the FTIR using the standard addition method. A final objective of the study was to investigate the reconstitution of Dithane by investigating the influence of the addition order of the various constituents on the stability of the final product. The addition order was found to have a definite influence on the thermal stability of the final product as well as on the percentage of fixed HMT in the product, and the kinetics of the Mn/Zn exchange.
- Full Text:
- Date Issued: 2007
- Authors: Williams, Nadia
- Date: 2007
- Subjects: Fungicides , Dithane
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10407 , http://hdl.handle.net/10948/645 , Fungicides , Dithane
- Description: Plant diseases caused by fungi are the number one cause of crop loss worldwide. The application of a fungicide which is a toxic substance applied either to prevent the growth of, or to kill fungi is one of the methods by which plant diseases are controlled. Ethylenebisdithiocarbamate fungicides are a group of surface acting fungicides which control a broad spectrum of fungi and their associated plant diseases. Mancozeb, also commonly known as Dithane, falls under the polymeric Dithiocarbamate fungicides which have several sites of toxicity to the fungal cell. The use of Mancozeb as a fungicide is increasing worldwide due to the advantages of low acute toxicity, low production and short environmental persistence. However, it has one major disadvantage, namely its lack of oxidative stability under ambient conditions. One of the objectives of this study was to characterize the Dithane samples supplied by Dow AgroSciences in terms of their active ingredient, metal and stabilizer content, and to study the thermal decomposition behaviour of Dithane. An attempt was made to correlate the active ingredient analyses with the TGA and DSC results to establish whether the thermal stability and active ingredient content of Dithane could be simultaneously determined by thermal analysis. This approach offered the attractive advantage of shorter analysis times thus allowing the elimination of the more tedious analytical methods employed by Dow AgroSciences. Furthermore, Fourier Transform infra-red characterization of Dithane samples and metal complexes containing HMT, Mn and/or Zn was carried out in order to identify the presence of functional groups and to gain some insight into the nature of the bonding of HMT, sulfate and water. A study of the nature of the bands in the FTIR spectra of these complexes was able to highlight the nature of the bonding but could not give confirmation of the structures of these complexes. In addition to this, the amount of HMT present in the said complexes was determined by the FTIR using the standard addition method. A final objective of the study was to investigate the reconstitution of Dithane by investigating the influence of the addition order of the various constituents on the stability of the final product. The addition order was found to have a definite influence on the thermal stability of the final product as well as on the percentage of fixed HMT in the product, and the kinetics of the Mn/Zn exchange.
- Full Text:
- Date Issued: 2007
An investigation of statistical methodologies for evaluating natural herbicides for the control of yellow nutsedge (Cyperus esculentus)
- Authors: Asquith, Ilse Bernadette
- Date: 2007
- Subjects: Chemometrics , Weeds
- Language: English
- Type: Thesis , Doctoral , DTech (Chemistry)
- Identifier: vital:10376 , Chemometrics , Weeds
- Description: The present study was undertaken with the view to evaluate methodologies based on traditional Scheffé experimental designs that study mixtures as a tool for discovery research particularly when seeking new and or improved uses of existing mixtures. For the purpose of this study, the topic of controlling the problematic weed known as Yellow Nutsedge (Cyperus esculentus L. var. esculentus) or “Geel Uintjie”, was selected on a rather ad hoc basis. Yellow Nutsedge is a troublesome perennial weed found in most agricultural countries in the world. Herbicidal control is often difficult because of the weeds’ ability to propagate via tubers, which can remain dormant for a number of years and are also resistant to most synthetic herbicide controls. As a first step the study involved the selection of a group of chemical compounds that would be used in suppressing the germination of Yellow Nutsedge tubers. Treatment with various combinations of these chemical compounds as determined by statistical experimental designs was carried out. A review of the literature, particularly literature concerned with the study of the phenomenon of allelopathy, suggested that various phenolic-D-glucopyranosides could show promise in the suppressing the germination of Yellow Nutsedge tubers. This led to the selection of this group of compounds as the target group of “active” substances for the study. Since the group of phenolic-D-glucopyranosides is quite large, and in order to keep the study to a reasonable size, only four phenolic-D-glucopyranosides were selected namely: 4-nitrophenyl-D-glucopyranoside, 4-chlorophenyl--Dglucopyranoside, arbutin and salicin. This selection was based firstly based on a particular phenolic-D-glucopyranoside being a suspected allelochemical, and secondly the ease of technical synthesis using a catalytic process. In addition to the four selected phenolic-D-glucopyranosides, their aglycones (4,nitrophenol, 4,chlorophenol, hydroquinone and salicyl alcohol) were also included as potential “active” substances in order to discern any potential activity between the phenolic-D-glucopyranosides and the aglycones. iii The selected “active substances” were combined in various combinations according to various mixture designs in such a manner that the sum of the proportions of the various actives in any one mixture was always equal to 1. The mixtures of actives were then used in various germination experiments and three experimental responses were measured namely the germination, average dry mass and length of longest shoot. From the results of these germination studies the canonical form of the polynomial equation describing the variation in each of the three germination responses was calculated and evaluated statistically. These equations were then used to estimate the presence of, and the magnitude of synergism between the various active substances. The results from these screening experiments and their detailed statistical analysis indicated that the response surface model for the germination response contains three synergistic blends (4-nitrophenyl--D-glucopyranoside + arbutin; 4-nitrophenyl--Dglucopyranoside + hydroquinone; and 4-chlorophenyl--D-glucopyranoside + salicin) and one antagonistic blend (4-nitrophenyl--D-glucopyranoside + 4- chlorophenol--D-glucopyranoside). The response surface model for the average dry mass response contains two synergistic blends (4-nitrophenyl--Dglucopyranoside + hydroquinone; and 4-chlorophenol--D-glucopyranoside + salicin) and the same antagonistic blend as for germination response. For both germination and average dry mass responses, the most synergistic blend was found to be the combination of 4-chlorophenyl--D-glucopyranoside and salicin. Two additional tests were conducted and both confirmed the results obtained from the screening designs. These tests involved the identification of the two components responsible for the synergistic activity that resulted in the suppression of the germination of the tubers and growth of the seedlings. The experimental response measuring the longest shoot proved to be erroneous and was excluded from the statistical analysis. In summary, this study has clearly shown that statistically designed experiments based on mixture designs can be used as a powerful tool in identifying and quantifying synergistic (or antagonistic) effects of chemicals on the germination ability of plant seeds.
- Full Text:
- Date Issued: 2007
- Authors: Asquith, Ilse Bernadette
- Date: 2007
- Subjects: Chemometrics , Weeds
- Language: English
- Type: Thesis , Doctoral , DTech (Chemistry)
- Identifier: vital:10376 , Chemometrics , Weeds
- Description: The present study was undertaken with the view to evaluate methodologies based on traditional Scheffé experimental designs that study mixtures as a tool for discovery research particularly when seeking new and or improved uses of existing mixtures. For the purpose of this study, the topic of controlling the problematic weed known as Yellow Nutsedge (Cyperus esculentus L. var. esculentus) or “Geel Uintjie”, was selected on a rather ad hoc basis. Yellow Nutsedge is a troublesome perennial weed found in most agricultural countries in the world. Herbicidal control is often difficult because of the weeds’ ability to propagate via tubers, which can remain dormant for a number of years and are also resistant to most synthetic herbicide controls. As a first step the study involved the selection of a group of chemical compounds that would be used in suppressing the germination of Yellow Nutsedge tubers. Treatment with various combinations of these chemical compounds as determined by statistical experimental designs was carried out. A review of the literature, particularly literature concerned with the study of the phenomenon of allelopathy, suggested that various phenolic-D-glucopyranosides could show promise in the suppressing the germination of Yellow Nutsedge tubers. This led to the selection of this group of compounds as the target group of “active” substances for the study. Since the group of phenolic-D-glucopyranosides is quite large, and in order to keep the study to a reasonable size, only four phenolic-D-glucopyranosides were selected namely: 4-nitrophenyl-D-glucopyranoside, 4-chlorophenyl--Dglucopyranoside, arbutin and salicin. This selection was based firstly based on a particular phenolic-D-glucopyranoside being a suspected allelochemical, and secondly the ease of technical synthesis using a catalytic process. In addition to the four selected phenolic-D-glucopyranosides, their aglycones (4,nitrophenol, 4,chlorophenol, hydroquinone and salicyl alcohol) were also included as potential “active” substances in order to discern any potential activity between the phenolic-D-glucopyranosides and the aglycones. iii The selected “active substances” were combined in various combinations according to various mixture designs in such a manner that the sum of the proportions of the various actives in any one mixture was always equal to 1. The mixtures of actives were then used in various germination experiments and three experimental responses were measured namely the germination, average dry mass and length of longest shoot. From the results of these germination studies the canonical form of the polynomial equation describing the variation in each of the three germination responses was calculated and evaluated statistically. These equations were then used to estimate the presence of, and the magnitude of synergism between the various active substances. The results from these screening experiments and their detailed statistical analysis indicated that the response surface model for the germination response contains three synergistic blends (4-nitrophenyl--D-glucopyranoside + arbutin; 4-nitrophenyl--Dglucopyranoside + hydroquinone; and 4-chlorophenyl--D-glucopyranoside + salicin) and one antagonistic blend (4-nitrophenyl--D-glucopyranoside + 4- chlorophenol--D-glucopyranoside). The response surface model for the average dry mass response contains two synergistic blends (4-nitrophenyl--Dglucopyranoside + hydroquinone; and 4-chlorophenol--D-glucopyranoside + salicin) and the same antagonistic blend as for germination response. For both germination and average dry mass responses, the most synergistic blend was found to be the combination of 4-chlorophenyl--D-glucopyranoside and salicin. Two additional tests were conducted and both confirmed the results obtained from the screening designs. These tests involved the identification of the two components responsible for the synergistic activity that resulted in the suppression of the germination of the tubers and growth of the seedlings. The experimental response measuring the longest shoot proved to be erroneous and was excluded from the statistical analysis. In summary, this study has clearly shown that statistically designed experiments based on mixture designs can be used as a powerful tool in identifying and quantifying synergistic (or antagonistic) effects of chemicals on the germination ability of plant seeds.
- Full Text:
- Date Issued: 2007
Assessing program code through static structural similarity
- Authors: Naude, Kevin Alexander
- Date: 2007
- Subjects: Computer networks -- Security measures , Internet -- Security measures
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10478 , http://hdl.handle.net/10948/578 , Computer networks -- Security measures , Internet -- Security measures
- Description: Learning to write software requires much practice and frequent assessment. Consequently, the use of computers to assist in the assessment of computer programs has been important in supporting large classes at universities. The main approaches to the problem are dynamic analysis (testing student programs for expected output) and static analysis (direct analysis of the program code). The former is very sensitive to all kinds of errors in student programs, while the latter has traditionally only been used to assess quality, and not correctness. This research focusses on the application of static analysis, particularly structural similarity, to marking student programs. Existing traditional measures of similarity are limiting in that they are usually only effective on tree structures. In this regard they do not easily support dependencies in program code. Contemporary measures of structural similarity, such as similarity flooding, usually rely on an internal normalisation of scores. The effect is that the scores only have relative meaning, and cannot be interpreted in isolation, ie. they are not meaningful for assessment. The SimRank measure is shown to have the same problem, but not because of normalisation. The problem with the SimRank measure arises from the fact that its scores depend on all possible mappings between the children of vertices being compared. The main contribution of this research is a novel graph similarity measure, the Weighted Assignment Similarity measure. It is related to SimRank, but derives propagation scores from only the locally optimal mapping between child vertices. The resulting similarity scores may be regarded as the percentage of mutual coverage between graphs. The measure is proven to converge for all directed acyclic graphs, and an efficient implementation is outlined for this case. Attributes on graph vertices and edges are often used to capture domain specific information which is not structural in nature. It has been suggested that these should influence the similarity propagation, but no clear method for doing this has been reported. The second important contribution of this research is a general method for incorporating these local attribute similarities into the larger similarity propagation method. An example of attributes in program graphs are identifier names. The choice of identifiers in programs is arbitrary as they are purely symbolic. A problem facing any comparison between programs is that they are unlikely to use the same set of identifiers. This problem indicates that a mapping between the identifier sets is required. The third contribution of this research is a method for applying the structural similarity measure in a two step process to find an optimal identifier mapping. This approach is both novel and valuable as it cleverly reuses the similarity measure as an existing resource. In general, programming assignments allow a large variety of solutions. Assessing student programs through structural similarity is only feasible if the diversity in the solution space can be addressed. This study narrows program diversity through a set of semantic preserving program transformations that convert programs into a normal form. The application of the Weighted Assignment Similarity measure to marking student programs is investigated, and strong correlations are found with the human marker. It is shown that the most accurate assessment requires that programs not only be compared with a set of good solutions, but rather a mixed set of programs of varying levels of correctness. This research represents the first documented successful application of structural similarity to the marking of student programs.
- Full Text:
- Date Issued: 2007
- Authors: Naude, Kevin Alexander
- Date: 2007
- Subjects: Computer networks -- Security measures , Internet -- Security measures
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10478 , http://hdl.handle.net/10948/578 , Computer networks -- Security measures , Internet -- Security measures
- Description: Learning to write software requires much practice and frequent assessment. Consequently, the use of computers to assist in the assessment of computer programs has been important in supporting large classes at universities. The main approaches to the problem are dynamic analysis (testing student programs for expected output) and static analysis (direct analysis of the program code). The former is very sensitive to all kinds of errors in student programs, while the latter has traditionally only been used to assess quality, and not correctness. This research focusses on the application of static analysis, particularly structural similarity, to marking student programs. Existing traditional measures of similarity are limiting in that they are usually only effective on tree structures. In this regard they do not easily support dependencies in program code. Contemporary measures of structural similarity, such as similarity flooding, usually rely on an internal normalisation of scores. The effect is that the scores only have relative meaning, and cannot be interpreted in isolation, ie. they are not meaningful for assessment. The SimRank measure is shown to have the same problem, but not because of normalisation. The problem with the SimRank measure arises from the fact that its scores depend on all possible mappings between the children of vertices being compared. The main contribution of this research is a novel graph similarity measure, the Weighted Assignment Similarity measure. It is related to SimRank, but derives propagation scores from only the locally optimal mapping between child vertices. The resulting similarity scores may be regarded as the percentage of mutual coverage between graphs. The measure is proven to converge for all directed acyclic graphs, and an efficient implementation is outlined for this case. Attributes on graph vertices and edges are often used to capture domain specific information which is not structural in nature. It has been suggested that these should influence the similarity propagation, but no clear method for doing this has been reported. The second important contribution of this research is a general method for incorporating these local attribute similarities into the larger similarity propagation method. An example of attributes in program graphs are identifier names. The choice of identifiers in programs is arbitrary as they are purely symbolic. A problem facing any comparison between programs is that they are unlikely to use the same set of identifiers. This problem indicates that a mapping between the identifier sets is required. The third contribution of this research is a method for applying the structural similarity measure in a two step process to find an optimal identifier mapping. This approach is both novel and valuable as it cleverly reuses the similarity measure as an existing resource. In general, programming assignments allow a large variety of solutions. Assessing student programs through structural similarity is only feasible if the diversity in the solution space can be addressed. This study narrows program diversity through a set of semantic preserving program transformations that convert programs into a normal form. The application of the Weighted Assignment Similarity measure to marking student programs is investigated, and strong correlations are found with the human marker. It is shown that the most accurate assessment requires that programs not only be compared with a set of good solutions, but rather a mixed set of programs of varying levels of correctness. This research represents the first documented successful application of structural similarity to the marking of student programs.
- Full Text:
- Date Issued: 2007
Characterisation of InAs-based epilayers by FTIR spectroscopy
- Authors: Baisitse, Tshepiso Revonia
- Date: 2007
- Subjects: Fourier transform infrared spectroscopy , Gallium arsenide semiconductors
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10534 , http://hdl.handle.net/10948/474 , Fourier transform infrared spectroscopy , Gallium arsenide semiconductors
- Description: This study focuses on the characterization of InAs and InAs1-xSbx epitaxial layers by infrared reflectance and transmittance spectroscopy and Hall measurements. Reflectance measurements were performed in order to obtain the dielectric parameters and to extract from these information about the electrical properties (mobility and carrier concentration) of this important III-V material system. The transmittance measurements were used to determine the bandgap of InAsSb. Infrared reflectivity and transmittance measurements were performed in the wavelength range 200 – 2000 cm-1 on InAs and InAsSb layers grown on three types of substrates. A classical two oscillator model that takes into account both the free carriers and the lattice, was used to analyse the reflectance data using the BMDP® computer curve fitting software. The dielectric parameters and the electrical properties (carrier concentration and mobility) were extracted from the simulations. Due to the low free carrier concentration in the epitaxial structures, the plasma resonance frequency (ωp) values obtained from the simulations of reflectance spectra measured above 200 cm-1, were in the order of 20-30 cm-1. These low values were confirmed by direct measurements of ωp in reflectance spectra obtained in the range 15-200 cm-1. The simulated carrier concentration and mobility values determined optically were compared to the values determined by Hall measurements at room temperature and previously reported values by other researchers. The simulated values obtained were in reasonable agreement with the Hall values. The simulated and measured carrier concentrations obtained for InAs layers were significantly higher than the intrinsic carrier concentration for InAs at room temperature, indicating notable concentrations of donors resulting from the growth process.
- Full Text:
- Date Issued: 2007
- Authors: Baisitse, Tshepiso Revonia
- Date: 2007
- Subjects: Fourier transform infrared spectroscopy , Gallium arsenide semiconductors
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10534 , http://hdl.handle.net/10948/474 , Fourier transform infrared spectroscopy , Gallium arsenide semiconductors
- Description: This study focuses on the characterization of InAs and InAs1-xSbx epitaxial layers by infrared reflectance and transmittance spectroscopy and Hall measurements. Reflectance measurements were performed in order to obtain the dielectric parameters and to extract from these information about the electrical properties (mobility and carrier concentration) of this important III-V material system. The transmittance measurements were used to determine the bandgap of InAsSb. Infrared reflectivity and transmittance measurements were performed in the wavelength range 200 – 2000 cm-1 on InAs and InAsSb layers grown on three types of substrates. A classical two oscillator model that takes into account both the free carriers and the lattice, was used to analyse the reflectance data using the BMDP® computer curve fitting software. The dielectric parameters and the electrical properties (carrier concentration and mobility) were extracted from the simulations. Due to the low free carrier concentration in the epitaxial structures, the plasma resonance frequency (ωp) values obtained from the simulations of reflectance spectra measured above 200 cm-1, were in the order of 20-30 cm-1. These low values were confirmed by direct measurements of ωp in reflectance spectra obtained in the range 15-200 cm-1. The simulated carrier concentration and mobility values determined optically were compared to the values determined by Hall measurements at room temperature and previously reported values by other researchers. The simulated values obtained were in reasonable agreement with the Hall values. The simulated and measured carrier concentrations obtained for InAs layers were significantly higher than the intrinsic carrier concentration for InAs at room temperature, indicating notable concentrations of donors resulting from the growth process.
- Full Text:
- Date Issued: 2007
Characterization of WC-VC-Co and WC-VC-TiC-Co hardmetals
- Authors: Hashe, Nobom Gretta
- Date: 2007
- Subjects: Carbides , Hard materials
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10533 , http://hdl.handle.net/10948/522 , http://hdl.handle.net/10948/d1011723 , Carbides , Hard materials
- Description: This thesis contains the results of a study focused on cubic carbide and carbonitride grain growth retardation in hardmetals. Large additions of VC, or VC and TiC, or (W,V)C were made to the WC-Co hardmetal, which was then sintered in vacuum or nitrogen. The effectiveness of Ti as the grain growth inhibitor, and the influence of nitrogen sintering on grain coarsening were investigated using transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffractrometry (XRD) and atom probe field ion microscope (APFIM). Analysis of vacuum-sintered WC-VC-Co revealed that the cubic carbide grains have a core-rim structure. Ti was found to be a core-rim inhibitor in vacuum-sintered WCVC- TiC-Co. The average cubic carbide grain size distribution for the vacuumsintered materials was narrowed in the Ti-containing hardmetal. The nitrogen-sintered WC-VC-TiC-Co consisted of two phases of cubic carbonitride, one with high Ti-content and the other with high (W,V)-content. The surface region of the nitrogen-sintered WC-VC-TiC-Co was covered with a cubic carbonitride phase. Similar phenomena was observed in nitrogen-sintered WC-VC-Co where two types of carbonitrides were found, those with high V-content and the others with low Vcontent. A gradient zone, consisting of fine WC grains in a Co-rich binder and free from cubic carbonitride grains, was created in the surface region. The nitrogensintered materials consisted of a narrow grain size distribution. The use of (W,V)C as a starting powder affected the mechanical properties of the material with the WC-(W,V)C-Co material being the hardest of those produced in this study. Addition of (W,V)C powder to WC-Co was shown to be the most effective way to limit the cubic carbide grain size during sintering and produce a hard material. The cubic carbide grain size in the material produced this way was the smallest of all studied.
- Full Text:
- Date Issued: 2007
- Authors: Hashe, Nobom Gretta
- Date: 2007
- Subjects: Carbides , Hard materials
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10533 , http://hdl.handle.net/10948/522 , http://hdl.handle.net/10948/d1011723 , Carbides , Hard materials
- Description: This thesis contains the results of a study focused on cubic carbide and carbonitride grain growth retardation in hardmetals. Large additions of VC, or VC and TiC, or (W,V)C were made to the WC-Co hardmetal, which was then sintered in vacuum or nitrogen. The effectiveness of Ti as the grain growth inhibitor, and the influence of nitrogen sintering on grain coarsening were investigated using transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffractrometry (XRD) and atom probe field ion microscope (APFIM). Analysis of vacuum-sintered WC-VC-Co revealed that the cubic carbide grains have a core-rim structure. Ti was found to be a core-rim inhibitor in vacuum-sintered WCVC- TiC-Co. The average cubic carbide grain size distribution for the vacuumsintered materials was narrowed in the Ti-containing hardmetal. The nitrogen-sintered WC-VC-TiC-Co consisted of two phases of cubic carbonitride, one with high Ti-content and the other with high (W,V)-content. The surface region of the nitrogen-sintered WC-VC-TiC-Co was covered with a cubic carbonitride phase. Similar phenomena was observed in nitrogen-sintered WC-VC-Co where two types of carbonitrides were found, those with high V-content and the others with low Vcontent. A gradient zone, consisting of fine WC grains in a Co-rich binder and free from cubic carbonitride grains, was created in the surface region. The nitrogensintered materials consisted of a narrow grain size distribution. The use of (W,V)C as a starting powder affected the mechanical properties of the material with the WC-(W,V)C-Co material being the hardest of those produced in this study. Addition of (W,V)C powder to WC-Co was shown to be the most effective way to limit the cubic carbide grain size during sintering and produce a hard material. The cubic carbide grain size in the material produced this way was the smallest of all studied.
- Full Text:
- Date Issued: 2007
Consistent testing for lag length in cointegrated relationships
- Authors: Liu, Limin
- Date: 2007
- Subjects: Cointegration -- South Africa , Econometrics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10575 , http://hdl.handle.net/10948/547 , http://hdl.handle.net/10948/d1011715 , Cointegration -- South Africa , Econometrics
- Description: In the past few decades the theory of cointegration has been widely used in the empirical analysis of economic data. The reason is that, it captures the economic notion of a long-run economic relation. One of the problems experienced when applying cointegrated techniques to econometric modelling is the determination of lag lengths for the modelled variables. Applied studies have resulted in contradictory choices for lag length selection. This study reviews and compares some of the well-known information criteria using simulation techniques for bivariate models.
- Full Text:
- Date Issued: 2007
- Authors: Liu, Limin
- Date: 2007
- Subjects: Cointegration -- South Africa , Econometrics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10575 , http://hdl.handle.net/10948/547 , http://hdl.handle.net/10948/d1011715 , Cointegration -- South Africa , Econometrics
- Description: In the past few decades the theory of cointegration has been widely used in the empirical analysis of economic data. The reason is that, it captures the economic notion of a long-run economic relation. One of the problems experienced when applying cointegrated techniques to econometric modelling is the determination of lag lengths for the modelled variables. Applied studies have resulted in contradictory choices for lag length selection. This study reviews and compares some of the well-known information criteria using simulation techniques for bivariate models.
- Full Text:
- Date Issued: 2007
Contributions to the use of microalgae in estuarine freshwater reserve determinations
- Authors: Snow, Gavin Charles
- Date: 2007
- Subjects: Microalgae -- South Africa , Estuarine ecology -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10620 , http://hdl.handle.net/10948/709 , Microalgae -- South Africa , Estuarine ecology -- South Africa
- Description: The ecologist Garrett Hardin (1968) introduced a useful concept called the tragedy of the commons, which describes how ecological resources become threatened or lost. The term “commons” is based on the commons of old English villages and is symbolic of a resource that is shared by a group of people. If every person were to use each resource in a sustainable fashion it would be available in perpetuity. However, if people use more than their share they would only increase their personal wealth to the detriment of others. In addition, an increase in the population would mean that the size of each share would have to decrease to accommodate the larger number of people. As a result, resources are threatened by personal greed and uncontrolled population growth. Freshwater is an example of a common resource that is under threat in South Africa where the average annual rainfall is less than 60 percent of the global average (Mukheibir & Sparks 2006). The increasing demands for freshwater as well as its eutrophication are major concerns with regards to estuarine health, environmental resource management and human health. The correct management of water is necessary to ensure that it is utilised in a sustainable manner. The National Water Act (No. 36 of 1998) has provided the rights to water for basic human needs and for sustainable ecological function; the Basic Human Needs Reserve and Ecological Reserve are both provided as a right in law. The amount of water necessary for an estuary to retain an acceptable ecological status, known as the Estuarine Ecological Reserve, is determined through the implementation of procedures (rapid, intermediate or comprehensive) compiled by the Department of Water Affairs and Forestry (1999) in its Resource Directed Measures (RDM) for the Protection of Water Resources. The impact of restricted flow on estuaries can be reduced by manipulating the water released from impoundments, the regulation of water abstractions within the river catchment or both (Hirji et al. 2002). The reserve assessment method is designed to evaluate ecosystem requirements by employing groups of specialists from different disciplines. In South Africa, this includes hydrologists, sedimentologists, water chemists and biologists (including microalgae specialists). The use of microalgae in ecological assessments has largely been based on research that was initiated at the Nelson Mandela Metropolitan University (formerly University of Port Elizabeth) and subsequently at Rhodes University (Grahamstown) and the University of KwaZulu Natal (Durban). The microalgal research can be divided into two main focus areas; phytoplankton and benthic microalgae
- Full Text:
- Date Issued: 2007
- Authors: Snow, Gavin Charles
- Date: 2007
- Subjects: Microalgae -- South Africa , Estuarine ecology -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10620 , http://hdl.handle.net/10948/709 , Microalgae -- South Africa , Estuarine ecology -- South Africa
- Description: The ecologist Garrett Hardin (1968) introduced a useful concept called the tragedy of the commons, which describes how ecological resources become threatened or lost. The term “commons” is based on the commons of old English villages and is symbolic of a resource that is shared by a group of people. If every person were to use each resource in a sustainable fashion it would be available in perpetuity. However, if people use more than their share they would only increase their personal wealth to the detriment of others. In addition, an increase in the population would mean that the size of each share would have to decrease to accommodate the larger number of people. As a result, resources are threatened by personal greed and uncontrolled population growth. Freshwater is an example of a common resource that is under threat in South Africa where the average annual rainfall is less than 60 percent of the global average (Mukheibir & Sparks 2006). The increasing demands for freshwater as well as its eutrophication are major concerns with regards to estuarine health, environmental resource management and human health. The correct management of water is necessary to ensure that it is utilised in a sustainable manner. The National Water Act (No. 36 of 1998) has provided the rights to water for basic human needs and for sustainable ecological function; the Basic Human Needs Reserve and Ecological Reserve are both provided as a right in law. The amount of water necessary for an estuary to retain an acceptable ecological status, known as the Estuarine Ecological Reserve, is determined through the implementation of procedures (rapid, intermediate or comprehensive) compiled by the Department of Water Affairs and Forestry (1999) in its Resource Directed Measures (RDM) for the Protection of Water Resources. The impact of restricted flow on estuaries can be reduced by manipulating the water released from impoundments, the regulation of water abstractions within the river catchment or both (Hirji et al. 2002). The reserve assessment method is designed to evaluate ecosystem requirements by employing groups of specialists from different disciplines. In South Africa, this includes hydrologists, sedimentologists, water chemists and biologists (including microalgae specialists). The use of microalgae in ecological assessments has largely been based on research that was initiated at the Nelson Mandela Metropolitan University (formerly University of Port Elizabeth) and subsequently at Rhodes University (Grahamstown) and the University of KwaZulu Natal (Durban). The microalgal research can be divided into two main focus areas; phytoplankton and benthic microalgae
- Full Text:
- Date Issued: 2007
Cost-benefit analysis of land restoration in the Assegaaibos Catchment Area with regard to water yield and tourism benefit
- Authors: Currie, Bianca
- Date: 2007
- Subjects: Reclamation of land -- Economic aspects -- South Africa -- Assegaaibos Catchment Area , Land use -- Environmental aspects -- South Africa -- Assegaaibos Catchment Area
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10751 , http://hdl.handle.net/10948/726 , Reclamation of land -- Economic aspects -- South Africa -- Assegaaibos Catchment Area , Land use -- Environmental aspects -- South Africa -- Assegaaibos Catchment Area
- Description: With the emergence of the new field of resource economics, one now has the ability to value and to include natural resources in decision making. This thesis aims to explore the valuation of natural resources by reviewing the economic values, techniques, methods and ecological aspects of restoration. Assegaaibos mountain catchment in the Western Cape Province has been used as a case-study example. A cost-benefit analysis of the restoration of the mountain catchment, in terms of the direct benefits of water and tourism, has been performed. The costs of restoration were observed to see whether they outweighed the benefits (income) derived (water and tourism). The results show that the water and tourism benefits did outweigh the costs of a basic restoration scenario. However, the basic restoration scenario did not fulfil the ecological requirements of the project. The results also illustrated that in the moderate restoration scenario, costs only outweighed the benefits when a three percent discount rate was applied. With the optimistic restoration scenario, costs outweighed benefits only when an eight percent discount rate was used. In the comprehensive restoration scenario, costs were shown to outweigh by far the water and tourism benefits over a thirty-year time frame. However, it should be noted that the deterioration of the environment (accelerated erosion, reinvasion, reduced water quality) was not factored into the costs of failure to rehabilitate.
- Full Text:
- Date Issued: 2007
- Authors: Currie, Bianca
- Date: 2007
- Subjects: Reclamation of land -- Economic aspects -- South Africa -- Assegaaibos Catchment Area , Land use -- Environmental aspects -- South Africa -- Assegaaibos Catchment Area
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10751 , http://hdl.handle.net/10948/726 , Reclamation of land -- Economic aspects -- South Africa -- Assegaaibos Catchment Area , Land use -- Environmental aspects -- South Africa -- Assegaaibos Catchment Area
- Description: With the emergence of the new field of resource economics, one now has the ability to value and to include natural resources in decision making. This thesis aims to explore the valuation of natural resources by reviewing the economic values, techniques, methods and ecological aspects of restoration. Assegaaibos mountain catchment in the Western Cape Province has been used as a case-study example. A cost-benefit analysis of the restoration of the mountain catchment, in terms of the direct benefits of water and tourism, has been performed. The costs of restoration were observed to see whether they outweighed the benefits (income) derived (water and tourism). The results show that the water and tourism benefits did outweigh the costs of a basic restoration scenario. However, the basic restoration scenario did not fulfil the ecological requirements of the project. The results also illustrated that in the moderate restoration scenario, costs only outweighed the benefits when a three percent discount rate was applied. With the optimistic restoration scenario, costs outweighed benefits only when an eight percent discount rate was used. In the comprehensive restoration scenario, costs were shown to outweigh by far the water and tourism benefits over a thirty-year time frame. However, it should be noted that the deterioration of the environment (accelerated erosion, reinvasion, reduced water quality) was not factored into the costs of failure to rehabilitate.
- Full Text:
- Date Issued: 2007
Cytokine properties of CD23 on human Eosinophilic cells
- Authors: Ferreira, Lauren
- Date: 2007
- Subjects: Cytokines , CD23 antigen , Eosinophil
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10333 , http://hdl.handle.net/10948/503 , http://hdl.handle.net/10948/d1012001 , Cytokines , CD23 antigen , Eosinophil
- Description: CD23, the low affinity IgE receptor, is expressed by various cell types and has numerous functions depending on the form of the protein, its interaction with various ligands and the type of cell involved. CD23 is pivotal in the regulation of IgE, with the soluble form involved in up-regulation, while the membrane bound form is involved in the down-regulation. It is clear why it is believed to be a central molecule in allergic responses, and a therapeutic target for the treatment of allergic disease. In this study a recombinant form of the entire extracellular domain of the protein, exCD23, was produced by PCR cloning and expressed in E. coli. His•Tag™s were introduced onto the C-terminus and N-terminus, respectively, in order to simplify the purification procedure. After renaturation and purification, the recombinant exCD23 bound IgE, indicating its activity. From the IgE binding studies it was established that the position of the tag did not influence the binding. GST•Tagged™ exCD23 was also produced in an attempt to increase the solubility of the recombinant protein, but this proved unsuccessful. Butyrate differentiated EoL-1 cells were treated with the Nterminal His•Tagged™ exCD23, and the protein appeared to suppress the secretion of the constitutively expressed cytokines, especially IL-8 and IFN- , when compared to untreated cells. In addition, treatment of the EoL-1 cells with exCD23 had a significant proliferative effect, but could not induce differentiation of this cell line into mature eosinophilic-like cells.
- Full Text:
- Date Issued: 2007
- Authors: Ferreira, Lauren
- Date: 2007
- Subjects: Cytokines , CD23 antigen , Eosinophil
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10333 , http://hdl.handle.net/10948/503 , http://hdl.handle.net/10948/d1012001 , Cytokines , CD23 antigen , Eosinophil
- Description: CD23, the low affinity IgE receptor, is expressed by various cell types and has numerous functions depending on the form of the protein, its interaction with various ligands and the type of cell involved. CD23 is pivotal in the regulation of IgE, with the soluble form involved in up-regulation, while the membrane bound form is involved in the down-regulation. It is clear why it is believed to be a central molecule in allergic responses, and a therapeutic target for the treatment of allergic disease. In this study a recombinant form of the entire extracellular domain of the protein, exCD23, was produced by PCR cloning and expressed in E. coli. His•Tag™s were introduced onto the C-terminus and N-terminus, respectively, in order to simplify the purification procedure. After renaturation and purification, the recombinant exCD23 bound IgE, indicating its activity. From the IgE binding studies it was established that the position of the tag did not influence the binding. GST•Tagged™ exCD23 was also produced in an attempt to increase the solubility of the recombinant protein, but this proved unsuccessful. Butyrate differentiated EoL-1 cells were treated with the Nterminal His•Tagged™ exCD23, and the protein appeared to suppress the secretion of the constitutively expressed cytokines, especially IL-8 and IFN- , when compared to untreated cells. In addition, treatment of the EoL-1 cells with exCD23 had a significant proliferative effect, but could not induce differentiation of this cell line into mature eosinophilic-like cells.
- Full Text:
- Date Issued: 2007
Elephant feeding behaviour and forage offtake implications in the Addo Elephant National Park
- Authors: Lessing, Joan Susanna
- Date: 2007
- Subjects: Elephants -- South Africa -- Addo Elephant National Park , Elephants -- Behavior , Addo Elephant National Park (South Africa) , Mammals -- Behavior
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10712 , http://hdl.handle.net/10948/542 , http://hdl.handle.net/10948/d1012016 , Elephants -- South Africa -- Addo Elephant National Park , Elephants -- Behavior , Addo Elephant National Park (South Africa) , Mammals -- Behavior
- Description: Elephants, as megaherbivores and keystone species have major impacts, both positive and negative, on ecosystems such as the Subtropical Thicket of the Eastern Cape. The feeding behaviour of elephants was quantified so as to firstly determine the preferred feeding heights of elephants, and secondly to determine if feeding behaviour and impact varies with size and sex. The preferred feeding height was determined with experimental feeding trials. Feeding height, pluck size, foraging rate and the proportion of plant material discarded were used to test for differences between elephants of different sizes and sexes in the Addo Elephant National Park. The influence of plant growth form on sex-specific feeding was also considered. Elephants preferred to feed at the lowest heights. The preferred feeding height was not related to body size. A wide range of feeding heights was recorded including and extending beyond, both the preferred and maximum feeding height of co-existing indigenous browsers. There was no difference in feeding height between the sizes and sexes. In free ranging conditions, all elephants fed at levels above the preferred foraging height when browsing. There was no difference in feeding behaviour between the different sized elephants, or between males and females. Adult elephants however exhibited larger ranges of feeding heights, pluck sizes, foraging rates and intake rates, including the maximum and minimum values. Growth form influenced the feeding of male and female elephants differently. Elephant feeding behaviour appears to limit opportunities for resource partitioning by way of feeding height segregation. Elephants are also capable of dominating the browse resources available to co-existing browsers by removing large amounts of forage at lower heights. The extent of elephant impact seems to be comparable between sizes and sexes, although adults and especially larger males are often able to use foraging opportunities that other elephants can not effectively utilize. Findings suggest that the feeding heights of elephants are determined by forage availability and reflect the diet in terms of browse or grass. The findings can be used, together with browse inventory methods, to determine browse resources available to elephants, and can also be used to develop monitoring tools to assess the impacts of elephants on plants.
- Full Text:
- Date Issued: 2007
- Authors: Lessing, Joan Susanna
- Date: 2007
- Subjects: Elephants -- South Africa -- Addo Elephant National Park , Elephants -- Behavior , Addo Elephant National Park (South Africa) , Mammals -- Behavior
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10712 , http://hdl.handle.net/10948/542 , http://hdl.handle.net/10948/d1012016 , Elephants -- South Africa -- Addo Elephant National Park , Elephants -- Behavior , Addo Elephant National Park (South Africa) , Mammals -- Behavior
- Description: Elephants, as megaherbivores and keystone species have major impacts, both positive and negative, on ecosystems such as the Subtropical Thicket of the Eastern Cape. The feeding behaviour of elephants was quantified so as to firstly determine the preferred feeding heights of elephants, and secondly to determine if feeding behaviour and impact varies with size and sex. The preferred feeding height was determined with experimental feeding trials. Feeding height, pluck size, foraging rate and the proportion of plant material discarded were used to test for differences between elephants of different sizes and sexes in the Addo Elephant National Park. The influence of plant growth form on sex-specific feeding was also considered. Elephants preferred to feed at the lowest heights. The preferred feeding height was not related to body size. A wide range of feeding heights was recorded including and extending beyond, both the preferred and maximum feeding height of co-existing indigenous browsers. There was no difference in feeding height between the sizes and sexes. In free ranging conditions, all elephants fed at levels above the preferred foraging height when browsing. There was no difference in feeding behaviour between the different sized elephants, or between males and females. Adult elephants however exhibited larger ranges of feeding heights, pluck sizes, foraging rates and intake rates, including the maximum and minimum values. Growth form influenced the feeding of male and female elephants differently. Elephant feeding behaviour appears to limit opportunities for resource partitioning by way of feeding height segregation. Elephants are also capable of dominating the browse resources available to co-existing browsers by removing large amounts of forage at lower heights. The extent of elephant impact seems to be comparable between sizes and sexes, although adults and especially larger males are often able to use foraging opportunities that other elephants can not effectively utilize. Findings suggest that the feeding heights of elephants are determined by forage availability and reflect the diet in terms of browse or grass. The findings can be used, together with browse inventory methods, to determine browse resources available to elephants, and can also be used to develop monitoring tools to assess the impacts of elephants on plants.
- Full Text:
- Date Issued: 2007
Endozoochory in the subtropical thicket: comparing effects of species with different digestive systems on seed fate
- Authors: Davis, Shavaughn
- Date: 2007
- Subjects: Seeds -- Dispersal
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10714 , http://hdl.handle.net/10948/494 , http://hdl.handle.net/10948/d1012018 , Seeds -- Dispersal
- Description: Endozoochory is an important form of seed dispersal and as such plays a fundamental role in plant population and community ecology. This is especially true in the Subtropical Thicket biome where many plant species are adapted for endozoochory. Endozoochorous seed dispersal is carried out by a wide range of thicket fauna, but changes in the faunal assemblage associated with transformed thicket threatens to disrupt the process of endozoochorous seed dispersal and in turn the regeneration dynamics of thicket plants. Outside of conservation areas, indigenous seed dispersers are often replaced by domestic species, such as goats, which are hypothesized to differ in their seed dispersal efficiencies. The dispersal efficiencies of important thicket seed dispersers that occur in transformed and untransformed thicket were therefore investigated. The influence of gut morphologyphysiology on seed gut passage time, seed mortality and germination in animal species representing different digestive models was measured, as well as the role of black-backed jackal in thicket plant seed dispersal. Black-backed jackal were found to disperse the seeds of few thicket plant species and are therefore not considered important thicket seed dispersers under the climatic conditions prevailing during the study. The average gut passage time of seeds was found to differ significantly between birds and mammals, but not between elephants (hindgut fermentor), goats (ruminant) and pigs (omnivore, foregut fermentor) as was expected considering the differences in their digestive morphology. A significantly shorter gut passage of large seeds compared with small seeds was observed in goats, due to the regurgitation of larger seeds. Seed regurgitation in ruminants may prove to be an important factor contributing to their quality as seed dispersers in transformed thicket. The mortality of seeds was significantly higher in goats than in elephants, probably due to the efficient digestion associated with ruminants. The effect of gut passage on seed germination was not consistent and varied between animal species and across different thicket plant species. It was concluded that seed dispersers that occur in transformed and untransformed thicket differ in their seed dispersal efficiency due, in part, to differences in the nature of their digestive tracts. This has important implications for the process of seed dispersal in thicket, and the rehabilitation of degraded thicket vegetation.
- Full Text:
- Date Issued: 2007
- Authors: Davis, Shavaughn
- Date: 2007
- Subjects: Seeds -- Dispersal
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10714 , http://hdl.handle.net/10948/494 , http://hdl.handle.net/10948/d1012018 , Seeds -- Dispersal
- Description: Endozoochory is an important form of seed dispersal and as such plays a fundamental role in plant population and community ecology. This is especially true in the Subtropical Thicket biome where many plant species are adapted for endozoochory. Endozoochorous seed dispersal is carried out by a wide range of thicket fauna, but changes in the faunal assemblage associated with transformed thicket threatens to disrupt the process of endozoochorous seed dispersal and in turn the regeneration dynamics of thicket plants. Outside of conservation areas, indigenous seed dispersers are often replaced by domestic species, such as goats, which are hypothesized to differ in their seed dispersal efficiencies. The dispersal efficiencies of important thicket seed dispersers that occur in transformed and untransformed thicket were therefore investigated. The influence of gut morphologyphysiology on seed gut passage time, seed mortality and germination in animal species representing different digestive models was measured, as well as the role of black-backed jackal in thicket plant seed dispersal. Black-backed jackal were found to disperse the seeds of few thicket plant species and are therefore not considered important thicket seed dispersers under the climatic conditions prevailing during the study. The average gut passage time of seeds was found to differ significantly between birds and mammals, but not between elephants (hindgut fermentor), goats (ruminant) and pigs (omnivore, foregut fermentor) as was expected considering the differences in their digestive morphology. A significantly shorter gut passage of large seeds compared with small seeds was observed in goats, due to the regurgitation of larger seeds. Seed regurgitation in ruminants may prove to be an important factor contributing to their quality as seed dispersers in transformed thicket. The mortality of seeds was significantly higher in goats than in elephants, probably due to the efficient digestion associated with ruminants. The effect of gut passage on seed germination was not consistent and varied between animal species and across different thicket plant species. It was concluded that seed dispersers that occur in transformed and untransformed thicket differ in their seed dispersal efficiency due, in part, to differences in the nature of their digestive tracts. This has important implications for the process of seed dispersal in thicket, and the rehabilitation of degraded thicket vegetation.
- Full Text:
- Date Issued: 2007
Field and laboratory measurements of PMD using interferometric techniques
- Authors: Mankga, Maphuti Comfort
- Date: 2007
- Subjects: Fiber optics , Polarization (Light)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10531 , http://hdl.handle.net/10948/557 , Fiber optics , Polarization (Light)
- Description: In this study, the generalized and traditional interferometric techniques (GINTY and TINTY) are used to investigate some of the important aspects of Polarization Mode Dispersion (PMD) phenomenon in optical fibres. Measurements of PMD and chromatic dispersion (CD) are performed on buried optical fibre cable in the Pretoria Telkom’s metropolitan network. The upgradeability of this network was investigated, and it was observed that just over a half of the fibres are upgradeable to 10 Gb.s-1 transmissions. Long-haul aerial network in the Northern Cape was also tested for upgradeability to 10 Gb.s-1. It was found that 41 percent of the fibres tested are upgradeable to 10 Gb.s-1. Long-term monitoring showed that PMD varies rapidly in aerial fibres and, on the other hand, it is relatively stable in buried cables. Investigations on the accuracy of the techniques showed that polarization scrambling is essential for the reduction of the measurements uncertainties. Furthermore, it was observed that TINTY underestimates the single scan PMD distributions. The study on the effect of the change in mode coupling on various fibre configurations was performed, and fibres showed a reduction in PMD after the introduction of mode coupling. Measurements of PMD conducted in the laboratory on cabled fibre with low PMD showed the floor sensitivity of TINTY. Comparison between GINTY and Jones Matrix Eigeanalysis (JME) PMD measurements methods were performed on an emulator, and the results showed a good agreement in the measured PMD.
- Full Text:
- Date Issued: 2007
- Authors: Mankga, Maphuti Comfort
- Date: 2007
- Subjects: Fiber optics , Polarization (Light)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10531 , http://hdl.handle.net/10948/557 , Fiber optics , Polarization (Light)
- Description: In this study, the generalized and traditional interferometric techniques (GINTY and TINTY) are used to investigate some of the important aspects of Polarization Mode Dispersion (PMD) phenomenon in optical fibres. Measurements of PMD and chromatic dispersion (CD) are performed on buried optical fibre cable in the Pretoria Telkom’s metropolitan network. The upgradeability of this network was investigated, and it was observed that just over a half of the fibres are upgradeable to 10 Gb.s-1 transmissions. Long-haul aerial network in the Northern Cape was also tested for upgradeability to 10 Gb.s-1. It was found that 41 percent of the fibres tested are upgradeable to 10 Gb.s-1. Long-term monitoring showed that PMD varies rapidly in aerial fibres and, on the other hand, it is relatively stable in buried cables. Investigations on the accuracy of the techniques showed that polarization scrambling is essential for the reduction of the measurements uncertainties. Furthermore, it was observed that TINTY underestimates the single scan PMD distributions. The study on the effect of the change in mode coupling on various fibre configurations was performed, and fibres showed a reduction in PMD after the introduction of mode coupling. Measurements of PMD conducted in the laboratory on cabled fibre with low PMD showed the floor sensitivity of TINTY. Comparison between GINTY and Jones Matrix Eigeanalysis (JME) PMD measurements methods were performed on an emulator, and the results showed a good agreement in the measured PMD.
- Full Text:
- Date Issued: 2007
Improving certain high performance properties of natural fibres
- Authors: Chapple, Stephen Anthony
- Date: 2007
- Subjects: Textile chemistry , Fireproofing of fabrics
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10451 , http://hdl.handle.net/10948/815 , Textile chemistry , Fireproofing of fabrics
- Description: Cotton possesses many characteristics that make it desirable to the consumer, and this has resulted in its usage in a broad range of products. Cotton, however, is a flammable material that is easily ignited and rapidly consumed. The flame retardant treatment of cotton is, therefore, an important textile process that has received wide attention over many years. There are a number of commercial flame retardant treatments available for cotton, the most common being phosphate-based. These treatments, however, often have drawbacks or have a negative impact on the desirable properties of the fibre and the challenge still exists for designing better flame retardant products and systems that are durable and have limited impact on fibre properties. The study considers the application of the sol-gel as a coating on fabric that was pre-treated with a phosphate-based flame retardant or as a means for applying a phosphate-based flame retardant. Both treatment methods were found to be suitable for imparting flame resistance to the fabric. The effect of various phosphate-based flame retardants on flammability and fabric properties such as colour, handle and strength was investigated and it was shown that a diammonium phosphate and urea combination gave the best flame resistance. In this regard, a flame resistance was achieved with a lower amount of phosphorous than was used in similar conventional treatments. The durability of the coating to rinsing with water and soaping with a detergent was also investigated. It was found that the flame resistance was lost after rinsing or soaping but the prevention of afterglow combustion was retained. It was shown that the preparatory treatment of the fabric influenced the sol-gel coating process and the flammability of the fabric. Mercerisation and bleaching of the fabric increased the “wet pick-up” during the coating process and improved the flame resistance. The influence of various factors was also investigated in further detail. The ratio of the sol-gel components, the delay after coating prior to drying (hang time) and the curing time were investigated using an experimental design. The curing time and the ratio of components in the sol-gel were shown to have the greatest influence on fabric properties and fabric flammability. It was shown that there is a trade-off between the desired high level of fabric flame resistance and preserving the inherent properties of the fabric such as colour, handle and strength.
- Full Text:
- Date Issued: 2007
- Authors: Chapple, Stephen Anthony
- Date: 2007
- Subjects: Textile chemistry , Fireproofing of fabrics
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10451 , http://hdl.handle.net/10948/815 , Textile chemistry , Fireproofing of fabrics
- Description: Cotton possesses many characteristics that make it desirable to the consumer, and this has resulted in its usage in a broad range of products. Cotton, however, is a flammable material that is easily ignited and rapidly consumed. The flame retardant treatment of cotton is, therefore, an important textile process that has received wide attention over many years. There are a number of commercial flame retardant treatments available for cotton, the most common being phosphate-based. These treatments, however, often have drawbacks or have a negative impact on the desirable properties of the fibre and the challenge still exists for designing better flame retardant products and systems that are durable and have limited impact on fibre properties. The study considers the application of the sol-gel as a coating on fabric that was pre-treated with a phosphate-based flame retardant or as a means for applying a phosphate-based flame retardant. Both treatment methods were found to be suitable for imparting flame resistance to the fabric. The effect of various phosphate-based flame retardants on flammability and fabric properties such as colour, handle and strength was investigated and it was shown that a diammonium phosphate and urea combination gave the best flame resistance. In this regard, a flame resistance was achieved with a lower amount of phosphorous than was used in similar conventional treatments. The durability of the coating to rinsing with water and soaping with a detergent was also investigated. It was found that the flame resistance was lost after rinsing or soaping but the prevention of afterglow combustion was retained. It was shown that the preparatory treatment of the fabric influenced the sol-gel coating process and the flammability of the fabric. Mercerisation and bleaching of the fabric increased the “wet pick-up” during the coating process and improved the flame resistance. The influence of various factors was also investigated in further detail. The ratio of the sol-gel components, the delay after coating prior to drying (hang time) and the curing time were investigated using an experimental design. The curing time and the ratio of components in the sol-gel were shown to have the greatest influence on fabric properties and fabric flammability. It was shown that there is a trade-off between the desired high level of fabric flame resistance and preserving the inherent properties of the fabric such as colour, handle and strength.
- Full Text:
- Date Issued: 2007