An investigation of statistical methodologies for evaluating natural herbicides for the control of yellow nutsedge (Cyperus esculentus)
- Authors: Asquith, Ilse Bernadette
- Date: 2007
- Subjects: Chemometrics , Weeds
- Language: English
- Type: Thesis , Doctoral , DTech (Chemistry)
- Identifier: vital:10376 , Chemometrics , Weeds
- Description: The present study was undertaken with the view to evaluate methodologies based on traditional Scheffé experimental designs that study mixtures as a tool for discovery research particularly when seeking new and or improved uses of existing mixtures. For the purpose of this study, the topic of controlling the problematic weed known as Yellow Nutsedge (Cyperus esculentus L. var. esculentus) or “Geel Uintjie”, was selected on a rather ad hoc basis. Yellow Nutsedge is a troublesome perennial weed found in most agricultural countries in the world. Herbicidal control is often difficult because of the weeds’ ability to propagate via tubers, which can remain dormant for a number of years and are also resistant to most synthetic herbicide controls. As a first step the study involved the selection of a group of chemical compounds that would be used in suppressing the germination of Yellow Nutsedge tubers. Treatment with various combinations of these chemical compounds as determined by statistical experimental designs was carried out. A review of the literature, particularly literature concerned with the study of the phenomenon of allelopathy, suggested that various phenolic-D-glucopyranosides could show promise in the suppressing the germination of Yellow Nutsedge tubers. This led to the selection of this group of compounds as the target group of “active” substances for the study. Since the group of phenolic-D-glucopyranosides is quite large, and in order to keep the study to a reasonable size, only four phenolic-D-glucopyranosides were selected namely: 4-nitrophenyl-D-glucopyranoside, 4-chlorophenyl--Dglucopyranoside, arbutin and salicin. This selection was based firstly based on a particular phenolic-D-glucopyranoside being a suspected allelochemical, and secondly the ease of technical synthesis using a catalytic process. In addition to the four selected phenolic-D-glucopyranosides, their aglycones (4,nitrophenol, 4,chlorophenol, hydroquinone and salicyl alcohol) were also included as potential “active” substances in order to discern any potential activity between the phenolic-D-glucopyranosides and the aglycones. iii The selected “active substances” were combined in various combinations according to various mixture designs in such a manner that the sum of the proportions of the various actives in any one mixture was always equal to 1. The mixtures of actives were then used in various germination experiments and three experimental responses were measured namely the germination, average dry mass and length of longest shoot. From the results of these germination studies the canonical form of the polynomial equation describing the variation in each of the three germination responses was calculated and evaluated statistically. These equations were then used to estimate the presence of, and the magnitude of synergism between the various active substances. The results from these screening experiments and their detailed statistical analysis indicated that the response surface model for the germination response contains three synergistic blends (4-nitrophenyl--D-glucopyranoside + arbutin; 4-nitrophenyl--Dglucopyranoside + hydroquinone; and 4-chlorophenyl--D-glucopyranoside + salicin) and one antagonistic blend (4-nitrophenyl--D-glucopyranoside + 4- chlorophenol--D-glucopyranoside). The response surface model for the average dry mass response contains two synergistic blends (4-nitrophenyl--Dglucopyranoside + hydroquinone; and 4-chlorophenol--D-glucopyranoside + salicin) and the same antagonistic blend as for germination response. For both germination and average dry mass responses, the most synergistic blend was found to be the combination of 4-chlorophenyl--D-glucopyranoside and salicin. Two additional tests were conducted and both confirmed the results obtained from the screening designs. These tests involved the identification of the two components responsible for the synergistic activity that resulted in the suppression of the germination of the tubers and growth of the seedlings. The experimental response measuring the longest shoot proved to be erroneous and was excluded from the statistical analysis. In summary, this study has clearly shown that statistically designed experiments based on mixture designs can be used as a powerful tool in identifying and quantifying synergistic (or antagonistic) effects of chemicals on the germination ability of plant seeds.
- Full Text:
- Date Issued: 2007
- Authors: Asquith, Ilse Bernadette
- Date: 2007
- Subjects: Chemometrics , Weeds
- Language: English
- Type: Thesis , Doctoral , DTech (Chemistry)
- Identifier: vital:10376 , Chemometrics , Weeds
- Description: The present study was undertaken with the view to evaluate methodologies based on traditional Scheffé experimental designs that study mixtures as a tool for discovery research particularly when seeking new and or improved uses of existing mixtures. For the purpose of this study, the topic of controlling the problematic weed known as Yellow Nutsedge (Cyperus esculentus L. var. esculentus) or “Geel Uintjie”, was selected on a rather ad hoc basis. Yellow Nutsedge is a troublesome perennial weed found in most agricultural countries in the world. Herbicidal control is often difficult because of the weeds’ ability to propagate via tubers, which can remain dormant for a number of years and are also resistant to most synthetic herbicide controls. As a first step the study involved the selection of a group of chemical compounds that would be used in suppressing the germination of Yellow Nutsedge tubers. Treatment with various combinations of these chemical compounds as determined by statistical experimental designs was carried out. A review of the literature, particularly literature concerned with the study of the phenomenon of allelopathy, suggested that various phenolic-D-glucopyranosides could show promise in the suppressing the germination of Yellow Nutsedge tubers. This led to the selection of this group of compounds as the target group of “active” substances for the study. Since the group of phenolic-D-glucopyranosides is quite large, and in order to keep the study to a reasonable size, only four phenolic-D-glucopyranosides were selected namely: 4-nitrophenyl-D-glucopyranoside, 4-chlorophenyl--Dglucopyranoside, arbutin and salicin. This selection was based firstly based on a particular phenolic-D-glucopyranoside being a suspected allelochemical, and secondly the ease of technical synthesis using a catalytic process. In addition to the four selected phenolic-D-glucopyranosides, their aglycones (4,nitrophenol, 4,chlorophenol, hydroquinone and salicyl alcohol) were also included as potential “active” substances in order to discern any potential activity between the phenolic-D-glucopyranosides and the aglycones. iii The selected “active substances” were combined in various combinations according to various mixture designs in such a manner that the sum of the proportions of the various actives in any one mixture was always equal to 1. The mixtures of actives were then used in various germination experiments and three experimental responses were measured namely the germination, average dry mass and length of longest shoot. From the results of these germination studies the canonical form of the polynomial equation describing the variation in each of the three germination responses was calculated and evaluated statistically. These equations were then used to estimate the presence of, and the magnitude of synergism between the various active substances. The results from these screening experiments and their detailed statistical analysis indicated that the response surface model for the germination response contains three synergistic blends (4-nitrophenyl--D-glucopyranoside + arbutin; 4-nitrophenyl--Dglucopyranoside + hydroquinone; and 4-chlorophenyl--D-glucopyranoside + salicin) and one antagonistic blend (4-nitrophenyl--D-glucopyranoside + 4- chlorophenol--D-glucopyranoside). The response surface model for the average dry mass response contains two synergistic blends (4-nitrophenyl--Dglucopyranoside + hydroquinone; and 4-chlorophenol--D-glucopyranoside + salicin) and the same antagonistic blend as for germination response. For both germination and average dry mass responses, the most synergistic blend was found to be the combination of 4-chlorophenyl--D-glucopyranoside and salicin. Two additional tests were conducted and both confirmed the results obtained from the screening designs. These tests involved the identification of the two components responsible for the synergistic activity that resulted in the suppression of the germination of the tubers and growth of the seedlings. The experimental response measuring the longest shoot proved to be erroneous and was excluded from the statistical analysis. In summary, this study has clearly shown that statistically designed experiments based on mixture designs can be used as a powerful tool in identifying and quantifying synergistic (or antagonistic) effects of chemicals on the germination ability of plant seeds.
- Full Text:
- Date Issued: 2007
Assessing program code through static structural similarity
- Authors: Naude, Kevin Alexander
- Date: 2007
- Subjects: Computer networks -- Security measures , Internet -- Security measures
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10478 , http://hdl.handle.net/10948/578 , Computer networks -- Security measures , Internet -- Security measures
- Description: Learning to write software requires much practice and frequent assessment. Consequently, the use of computers to assist in the assessment of computer programs has been important in supporting large classes at universities. The main approaches to the problem are dynamic analysis (testing student programs for expected output) and static analysis (direct analysis of the program code). The former is very sensitive to all kinds of errors in student programs, while the latter has traditionally only been used to assess quality, and not correctness. This research focusses on the application of static analysis, particularly structural similarity, to marking student programs. Existing traditional measures of similarity are limiting in that they are usually only effective on tree structures. In this regard they do not easily support dependencies in program code. Contemporary measures of structural similarity, such as similarity flooding, usually rely on an internal normalisation of scores. The effect is that the scores only have relative meaning, and cannot be interpreted in isolation, ie. they are not meaningful for assessment. The SimRank measure is shown to have the same problem, but not because of normalisation. The problem with the SimRank measure arises from the fact that its scores depend on all possible mappings between the children of vertices being compared. The main contribution of this research is a novel graph similarity measure, the Weighted Assignment Similarity measure. It is related to SimRank, but derives propagation scores from only the locally optimal mapping between child vertices. The resulting similarity scores may be regarded as the percentage of mutual coverage between graphs. The measure is proven to converge for all directed acyclic graphs, and an efficient implementation is outlined for this case. Attributes on graph vertices and edges are often used to capture domain specific information which is not structural in nature. It has been suggested that these should influence the similarity propagation, but no clear method for doing this has been reported. The second important contribution of this research is a general method for incorporating these local attribute similarities into the larger similarity propagation method. An example of attributes in program graphs are identifier names. The choice of identifiers in programs is arbitrary as they are purely symbolic. A problem facing any comparison between programs is that they are unlikely to use the same set of identifiers. This problem indicates that a mapping between the identifier sets is required. The third contribution of this research is a method for applying the structural similarity measure in a two step process to find an optimal identifier mapping. This approach is both novel and valuable as it cleverly reuses the similarity measure as an existing resource. In general, programming assignments allow a large variety of solutions. Assessing student programs through structural similarity is only feasible if the diversity in the solution space can be addressed. This study narrows program diversity through a set of semantic preserving program transformations that convert programs into a normal form. The application of the Weighted Assignment Similarity measure to marking student programs is investigated, and strong correlations are found with the human marker. It is shown that the most accurate assessment requires that programs not only be compared with a set of good solutions, but rather a mixed set of programs of varying levels of correctness. This research represents the first documented successful application of structural similarity to the marking of student programs.
- Full Text:
- Date Issued: 2007
- Authors: Naude, Kevin Alexander
- Date: 2007
- Subjects: Computer networks -- Security measures , Internet -- Security measures
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10478 , http://hdl.handle.net/10948/578 , Computer networks -- Security measures , Internet -- Security measures
- Description: Learning to write software requires much practice and frequent assessment. Consequently, the use of computers to assist in the assessment of computer programs has been important in supporting large classes at universities. The main approaches to the problem are dynamic analysis (testing student programs for expected output) and static analysis (direct analysis of the program code). The former is very sensitive to all kinds of errors in student programs, while the latter has traditionally only been used to assess quality, and not correctness. This research focusses on the application of static analysis, particularly structural similarity, to marking student programs. Existing traditional measures of similarity are limiting in that they are usually only effective on tree structures. In this regard they do not easily support dependencies in program code. Contemporary measures of structural similarity, such as similarity flooding, usually rely on an internal normalisation of scores. The effect is that the scores only have relative meaning, and cannot be interpreted in isolation, ie. they are not meaningful for assessment. The SimRank measure is shown to have the same problem, but not because of normalisation. The problem with the SimRank measure arises from the fact that its scores depend on all possible mappings between the children of vertices being compared. The main contribution of this research is a novel graph similarity measure, the Weighted Assignment Similarity measure. It is related to SimRank, but derives propagation scores from only the locally optimal mapping between child vertices. The resulting similarity scores may be regarded as the percentage of mutual coverage between graphs. The measure is proven to converge for all directed acyclic graphs, and an efficient implementation is outlined for this case. Attributes on graph vertices and edges are often used to capture domain specific information which is not structural in nature. It has been suggested that these should influence the similarity propagation, but no clear method for doing this has been reported. The second important contribution of this research is a general method for incorporating these local attribute similarities into the larger similarity propagation method. An example of attributes in program graphs are identifier names. The choice of identifiers in programs is arbitrary as they are purely symbolic. A problem facing any comparison between programs is that they are unlikely to use the same set of identifiers. This problem indicates that a mapping between the identifier sets is required. The third contribution of this research is a method for applying the structural similarity measure in a two step process to find an optimal identifier mapping. This approach is both novel and valuable as it cleverly reuses the similarity measure as an existing resource. In general, programming assignments allow a large variety of solutions. Assessing student programs through structural similarity is only feasible if the diversity in the solution space can be addressed. This study narrows program diversity through a set of semantic preserving program transformations that convert programs into a normal form. The application of the Weighted Assignment Similarity measure to marking student programs is investigated, and strong correlations are found with the human marker. It is shown that the most accurate assessment requires that programs not only be compared with a set of good solutions, but rather a mixed set of programs of varying levels of correctness. This research represents the first documented successful application of structural similarity to the marking of student programs.
- Full Text:
- Date Issued: 2007
Characterisation of InAs-based epilayers by FTIR spectroscopy
- Authors: Baisitse, Tshepiso Revonia
- Date: 2007
- Subjects: Fourier transform infrared spectroscopy , Gallium arsenide semiconductors
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10534 , http://hdl.handle.net/10948/474 , Fourier transform infrared spectroscopy , Gallium arsenide semiconductors
- Description: This study focuses on the characterization of InAs and InAs1-xSbx epitaxial layers by infrared reflectance and transmittance spectroscopy and Hall measurements. Reflectance measurements were performed in order to obtain the dielectric parameters and to extract from these information about the electrical properties (mobility and carrier concentration) of this important III-V material system. The transmittance measurements were used to determine the bandgap of InAsSb. Infrared reflectivity and transmittance measurements were performed in the wavelength range 200 – 2000 cm-1 on InAs and InAsSb layers grown on three types of substrates. A classical two oscillator model that takes into account both the free carriers and the lattice, was used to analyse the reflectance data using the BMDP® computer curve fitting software. The dielectric parameters and the electrical properties (carrier concentration and mobility) were extracted from the simulations. Due to the low free carrier concentration in the epitaxial structures, the plasma resonance frequency (ωp) values obtained from the simulations of reflectance spectra measured above 200 cm-1, were in the order of 20-30 cm-1. These low values were confirmed by direct measurements of ωp in reflectance spectra obtained in the range 15-200 cm-1. The simulated carrier concentration and mobility values determined optically were compared to the values determined by Hall measurements at room temperature and previously reported values by other researchers. The simulated values obtained were in reasonable agreement with the Hall values. The simulated and measured carrier concentrations obtained for InAs layers were significantly higher than the intrinsic carrier concentration for InAs at room temperature, indicating notable concentrations of donors resulting from the growth process.
- Full Text:
- Date Issued: 2007
- Authors: Baisitse, Tshepiso Revonia
- Date: 2007
- Subjects: Fourier transform infrared spectroscopy , Gallium arsenide semiconductors
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10534 , http://hdl.handle.net/10948/474 , Fourier transform infrared spectroscopy , Gallium arsenide semiconductors
- Description: This study focuses on the characterization of InAs and InAs1-xSbx epitaxial layers by infrared reflectance and transmittance spectroscopy and Hall measurements. Reflectance measurements were performed in order to obtain the dielectric parameters and to extract from these information about the electrical properties (mobility and carrier concentration) of this important III-V material system. The transmittance measurements were used to determine the bandgap of InAsSb. Infrared reflectivity and transmittance measurements were performed in the wavelength range 200 – 2000 cm-1 on InAs and InAsSb layers grown on three types of substrates. A classical two oscillator model that takes into account both the free carriers and the lattice, was used to analyse the reflectance data using the BMDP® computer curve fitting software. The dielectric parameters and the electrical properties (carrier concentration and mobility) were extracted from the simulations. Due to the low free carrier concentration in the epitaxial structures, the plasma resonance frequency (ωp) values obtained from the simulations of reflectance spectra measured above 200 cm-1, were in the order of 20-30 cm-1. These low values were confirmed by direct measurements of ωp in reflectance spectra obtained in the range 15-200 cm-1. The simulated carrier concentration and mobility values determined optically were compared to the values determined by Hall measurements at room temperature and previously reported values by other researchers. The simulated values obtained were in reasonable agreement with the Hall values. The simulated and measured carrier concentrations obtained for InAs layers were significantly higher than the intrinsic carrier concentration for InAs at room temperature, indicating notable concentrations of donors resulting from the growth process.
- Full Text:
- Date Issued: 2007
Characterization of WC-VC-Co and WC-VC-TiC-Co hardmetals
- Authors: Hashe, Nobom Gretta
- Date: 2007
- Subjects: Carbides , Hard materials
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10533 , http://hdl.handle.net/10948/522 , http://hdl.handle.net/10948/d1011723 , Carbides , Hard materials
- Description: This thesis contains the results of a study focused on cubic carbide and carbonitride grain growth retardation in hardmetals. Large additions of VC, or VC and TiC, or (W,V)C were made to the WC-Co hardmetal, which was then sintered in vacuum or nitrogen. The effectiveness of Ti as the grain growth inhibitor, and the influence of nitrogen sintering on grain coarsening were investigated using transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffractrometry (XRD) and atom probe field ion microscope (APFIM). Analysis of vacuum-sintered WC-VC-Co revealed that the cubic carbide grains have a core-rim structure. Ti was found to be a core-rim inhibitor in vacuum-sintered WCVC- TiC-Co. The average cubic carbide grain size distribution for the vacuumsintered materials was narrowed in the Ti-containing hardmetal. The nitrogen-sintered WC-VC-TiC-Co consisted of two phases of cubic carbonitride, one with high Ti-content and the other with high (W,V)-content. The surface region of the nitrogen-sintered WC-VC-TiC-Co was covered with a cubic carbonitride phase. Similar phenomena was observed in nitrogen-sintered WC-VC-Co where two types of carbonitrides were found, those with high V-content and the others with low Vcontent. A gradient zone, consisting of fine WC grains in a Co-rich binder and free from cubic carbonitride grains, was created in the surface region. The nitrogensintered materials consisted of a narrow grain size distribution. The use of (W,V)C as a starting powder affected the mechanical properties of the material with the WC-(W,V)C-Co material being the hardest of those produced in this study. Addition of (W,V)C powder to WC-Co was shown to be the most effective way to limit the cubic carbide grain size during sintering and produce a hard material. The cubic carbide grain size in the material produced this way was the smallest of all studied.
- Full Text:
- Date Issued: 2007
- Authors: Hashe, Nobom Gretta
- Date: 2007
- Subjects: Carbides , Hard materials
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10533 , http://hdl.handle.net/10948/522 , http://hdl.handle.net/10948/d1011723 , Carbides , Hard materials
- Description: This thesis contains the results of a study focused on cubic carbide and carbonitride grain growth retardation in hardmetals. Large additions of VC, or VC and TiC, or (W,V)C were made to the WC-Co hardmetal, which was then sintered in vacuum or nitrogen. The effectiveness of Ti as the grain growth inhibitor, and the influence of nitrogen sintering on grain coarsening were investigated using transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffractrometry (XRD) and atom probe field ion microscope (APFIM). Analysis of vacuum-sintered WC-VC-Co revealed that the cubic carbide grains have a core-rim structure. Ti was found to be a core-rim inhibitor in vacuum-sintered WCVC- TiC-Co. The average cubic carbide grain size distribution for the vacuumsintered materials was narrowed in the Ti-containing hardmetal. The nitrogen-sintered WC-VC-TiC-Co consisted of two phases of cubic carbonitride, one with high Ti-content and the other with high (W,V)-content. The surface region of the nitrogen-sintered WC-VC-TiC-Co was covered with a cubic carbonitride phase. Similar phenomena was observed in nitrogen-sintered WC-VC-Co where two types of carbonitrides were found, those with high V-content and the others with low Vcontent. A gradient zone, consisting of fine WC grains in a Co-rich binder and free from cubic carbonitride grains, was created in the surface region. The nitrogensintered materials consisted of a narrow grain size distribution. The use of (W,V)C as a starting powder affected the mechanical properties of the material with the WC-(W,V)C-Co material being the hardest of those produced in this study. Addition of (W,V)C powder to WC-Co was shown to be the most effective way to limit the cubic carbide grain size during sintering and produce a hard material. The cubic carbide grain size in the material produced this way was the smallest of all studied.
- Full Text:
- Date Issued: 2007
Consistent testing for lag length in cointegrated relationships
- Authors: Liu, Limin
- Date: 2007
- Subjects: Cointegration -- South Africa , Econometrics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10575 , http://hdl.handle.net/10948/547 , http://hdl.handle.net/10948/d1011715 , Cointegration -- South Africa , Econometrics
- Description: In the past few decades the theory of cointegration has been widely used in the empirical analysis of economic data. The reason is that, it captures the economic notion of a long-run economic relation. One of the problems experienced when applying cointegrated techniques to econometric modelling is the determination of lag lengths for the modelled variables. Applied studies have resulted in contradictory choices for lag length selection. This study reviews and compares some of the well-known information criteria using simulation techniques for bivariate models.
- Full Text:
- Date Issued: 2007
- Authors: Liu, Limin
- Date: 2007
- Subjects: Cointegration -- South Africa , Econometrics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10575 , http://hdl.handle.net/10948/547 , http://hdl.handle.net/10948/d1011715 , Cointegration -- South Africa , Econometrics
- Description: In the past few decades the theory of cointegration has been widely used in the empirical analysis of economic data. The reason is that, it captures the economic notion of a long-run economic relation. One of the problems experienced when applying cointegrated techniques to econometric modelling is the determination of lag lengths for the modelled variables. Applied studies have resulted in contradictory choices for lag length selection. This study reviews and compares some of the well-known information criteria using simulation techniques for bivariate models.
- Full Text:
- Date Issued: 2007
Contributions to the use of microalgae in estuarine freshwater reserve determinations
- Authors: Snow, Gavin Charles
- Date: 2007
- Subjects: Microalgae -- South Africa , Estuarine ecology -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10620 , http://hdl.handle.net/10948/709 , Microalgae -- South Africa , Estuarine ecology -- South Africa
- Description: The ecologist Garrett Hardin (1968) introduced a useful concept called the tragedy of the commons, which describes how ecological resources become threatened or lost. The term “commons” is based on the commons of old English villages and is symbolic of a resource that is shared by a group of people. If every person were to use each resource in a sustainable fashion it would be available in perpetuity. However, if people use more than their share they would only increase their personal wealth to the detriment of others. In addition, an increase in the population would mean that the size of each share would have to decrease to accommodate the larger number of people. As a result, resources are threatened by personal greed and uncontrolled population growth. Freshwater is an example of a common resource that is under threat in South Africa where the average annual rainfall is less than 60 percent of the global average (Mukheibir & Sparks 2006). The increasing demands for freshwater as well as its eutrophication are major concerns with regards to estuarine health, environmental resource management and human health. The correct management of water is necessary to ensure that it is utilised in a sustainable manner. The National Water Act (No. 36 of 1998) has provided the rights to water for basic human needs and for sustainable ecological function; the Basic Human Needs Reserve and Ecological Reserve are both provided as a right in law. The amount of water necessary for an estuary to retain an acceptable ecological status, known as the Estuarine Ecological Reserve, is determined through the implementation of procedures (rapid, intermediate or comprehensive) compiled by the Department of Water Affairs and Forestry (1999) in its Resource Directed Measures (RDM) for the Protection of Water Resources. The impact of restricted flow on estuaries can be reduced by manipulating the water released from impoundments, the regulation of water abstractions within the river catchment or both (Hirji et al. 2002). The reserve assessment method is designed to evaluate ecosystem requirements by employing groups of specialists from different disciplines. In South Africa, this includes hydrologists, sedimentologists, water chemists and biologists (including microalgae specialists). The use of microalgae in ecological assessments has largely been based on research that was initiated at the Nelson Mandela Metropolitan University (formerly University of Port Elizabeth) and subsequently at Rhodes University (Grahamstown) and the University of KwaZulu Natal (Durban). The microalgal research can be divided into two main focus areas; phytoplankton and benthic microalgae
- Full Text:
- Date Issued: 2007
- Authors: Snow, Gavin Charles
- Date: 2007
- Subjects: Microalgae -- South Africa , Estuarine ecology -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10620 , http://hdl.handle.net/10948/709 , Microalgae -- South Africa , Estuarine ecology -- South Africa
- Description: The ecologist Garrett Hardin (1968) introduced a useful concept called the tragedy of the commons, which describes how ecological resources become threatened or lost. The term “commons” is based on the commons of old English villages and is symbolic of a resource that is shared by a group of people. If every person were to use each resource in a sustainable fashion it would be available in perpetuity. However, if people use more than their share they would only increase their personal wealth to the detriment of others. In addition, an increase in the population would mean that the size of each share would have to decrease to accommodate the larger number of people. As a result, resources are threatened by personal greed and uncontrolled population growth. Freshwater is an example of a common resource that is under threat in South Africa where the average annual rainfall is less than 60 percent of the global average (Mukheibir & Sparks 2006). The increasing demands for freshwater as well as its eutrophication are major concerns with regards to estuarine health, environmental resource management and human health. The correct management of water is necessary to ensure that it is utilised in a sustainable manner. The National Water Act (No. 36 of 1998) has provided the rights to water for basic human needs and for sustainable ecological function; the Basic Human Needs Reserve and Ecological Reserve are both provided as a right in law. The amount of water necessary for an estuary to retain an acceptable ecological status, known as the Estuarine Ecological Reserve, is determined through the implementation of procedures (rapid, intermediate or comprehensive) compiled by the Department of Water Affairs and Forestry (1999) in its Resource Directed Measures (RDM) for the Protection of Water Resources. The impact of restricted flow on estuaries can be reduced by manipulating the water released from impoundments, the regulation of water abstractions within the river catchment or both (Hirji et al. 2002). The reserve assessment method is designed to evaluate ecosystem requirements by employing groups of specialists from different disciplines. In South Africa, this includes hydrologists, sedimentologists, water chemists and biologists (including microalgae specialists). The use of microalgae in ecological assessments has largely been based on research that was initiated at the Nelson Mandela Metropolitan University (formerly University of Port Elizabeth) and subsequently at Rhodes University (Grahamstown) and the University of KwaZulu Natal (Durban). The microalgal research can be divided into two main focus areas; phytoplankton and benthic microalgae
- Full Text:
- Date Issued: 2007
Cost-benefit analysis of land restoration in the Assegaaibos Catchment Area with regard to water yield and tourism benefit
- Authors: Currie, Bianca
- Date: 2007
- Subjects: Reclamation of land -- Economic aspects -- South Africa -- Assegaaibos Catchment Area , Land use -- Environmental aspects -- South Africa -- Assegaaibos Catchment Area
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10751 , http://hdl.handle.net/10948/726 , Reclamation of land -- Economic aspects -- South Africa -- Assegaaibos Catchment Area , Land use -- Environmental aspects -- South Africa -- Assegaaibos Catchment Area
- Description: With the emergence of the new field of resource economics, one now has the ability to value and to include natural resources in decision making. This thesis aims to explore the valuation of natural resources by reviewing the economic values, techniques, methods and ecological aspects of restoration. Assegaaibos mountain catchment in the Western Cape Province has been used as a case-study example. A cost-benefit analysis of the restoration of the mountain catchment, in terms of the direct benefits of water and tourism, has been performed. The costs of restoration were observed to see whether they outweighed the benefits (income) derived (water and tourism). The results show that the water and tourism benefits did outweigh the costs of a basic restoration scenario. However, the basic restoration scenario did not fulfil the ecological requirements of the project. The results also illustrated that in the moderate restoration scenario, costs only outweighed the benefits when a three percent discount rate was applied. With the optimistic restoration scenario, costs outweighed benefits only when an eight percent discount rate was used. In the comprehensive restoration scenario, costs were shown to outweigh by far the water and tourism benefits over a thirty-year time frame. However, it should be noted that the deterioration of the environment (accelerated erosion, reinvasion, reduced water quality) was not factored into the costs of failure to rehabilitate.
- Full Text:
- Date Issued: 2007
- Authors: Currie, Bianca
- Date: 2007
- Subjects: Reclamation of land -- Economic aspects -- South Africa -- Assegaaibos Catchment Area , Land use -- Environmental aspects -- South Africa -- Assegaaibos Catchment Area
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10751 , http://hdl.handle.net/10948/726 , Reclamation of land -- Economic aspects -- South Africa -- Assegaaibos Catchment Area , Land use -- Environmental aspects -- South Africa -- Assegaaibos Catchment Area
- Description: With the emergence of the new field of resource economics, one now has the ability to value and to include natural resources in decision making. This thesis aims to explore the valuation of natural resources by reviewing the economic values, techniques, methods and ecological aspects of restoration. Assegaaibos mountain catchment in the Western Cape Province has been used as a case-study example. A cost-benefit analysis of the restoration of the mountain catchment, in terms of the direct benefits of water and tourism, has been performed. The costs of restoration were observed to see whether they outweighed the benefits (income) derived (water and tourism). The results show that the water and tourism benefits did outweigh the costs of a basic restoration scenario. However, the basic restoration scenario did not fulfil the ecological requirements of the project. The results also illustrated that in the moderate restoration scenario, costs only outweighed the benefits when a three percent discount rate was applied. With the optimistic restoration scenario, costs outweighed benefits only when an eight percent discount rate was used. In the comprehensive restoration scenario, costs were shown to outweigh by far the water and tourism benefits over a thirty-year time frame. However, it should be noted that the deterioration of the environment (accelerated erosion, reinvasion, reduced water quality) was not factored into the costs of failure to rehabilitate.
- Full Text:
- Date Issued: 2007
Cytokine properties of CD23 on human Eosinophilic cells
- Authors: Ferreira, Lauren
- Date: 2007
- Subjects: Cytokines , CD23 antigen , Eosinophil
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10333 , http://hdl.handle.net/10948/503 , http://hdl.handle.net/10948/d1012001 , Cytokines , CD23 antigen , Eosinophil
- Description: CD23, the low affinity IgE receptor, is expressed by various cell types and has numerous functions depending on the form of the protein, its interaction with various ligands and the type of cell involved. CD23 is pivotal in the regulation of IgE, with the soluble form involved in up-regulation, while the membrane bound form is involved in the down-regulation. It is clear why it is believed to be a central molecule in allergic responses, and a therapeutic target for the treatment of allergic disease. In this study a recombinant form of the entire extracellular domain of the protein, exCD23, was produced by PCR cloning and expressed in E. coli. His•Tag™s were introduced onto the C-terminus and N-terminus, respectively, in order to simplify the purification procedure. After renaturation and purification, the recombinant exCD23 bound IgE, indicating its activity. From the IgE binding studies it was established that the position of the tag did not influence the binding. GST•Tagged™ exCD23 was also produced in an attempt to increase the solubility of the recombinant protein, but this proved unsuccessful. Butyrate differentiated EoL-1 cells were treated with the Nterminal His•Tagged™ exCD23, and the protein appeared to suppress the secretion of the constitutively expressed cytokines, especially IL-8 and IFN- , when compared to untreated cells. In addition, treatment of the EoL-1 cells with exCD23 had a significant proliferative effect, but could not induce differentiation of this cell line into mature eosinophilic-like cells.
- Full Text:
- Date Issued: 2007
- Authors: Ferreira, Lauren
- Date: 2007
- Subjects: Cytokines , CD23 antigen , Eosinophil
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10333 , http://hdl.handle.net/10948/503 , http://hdl.handle.net/10948/d1012001 , Cytokines , CD23 antigen , Eosinophil
- Description: CD23, the low affinity IgE receptor, is expressed by various cell types and has numerous functions depending on the form of the protein, its interaction with various ligands and the type of cell involved. CD23 is pivotal in the regulation of IgE, with the soluble form involved in up-regulation, while the membrane bound form is involved in the down-regulation. It is clear why it is believed to be a central molecule in allergic responses, and a therapeutic target for the treatment of allergic disease. In this study a recombinant form of the entire extracellular domain of the protein, exCD23, was produced by PCR cloning and expressed in E. coli. His•Tag™s were introduced onto the C-terminus and N-terminus, respectively, in order to simplify the purification procedure. After renaturation and purification, the recombinant exCD23 bound IgE, indicating its activity. From the IgE binding studies it was established that the position of the tag did not influence the binding. GST•Tagged™ exCD23 was also produced in an attempt to increase the solubility of the recombinant protein, but this proved unsuccessful. Butyrate differentiated EoL-1 cells were treated with the Nterminal His•Tagged™ exCD23, and the protein appeared to suppress the secretion of the constitutively expressed cytokines, especially IL-8 and IFN- , when compared to untreated cells. In addition, treatment of the EoL-1 cells with exCD23 had a significant proliferative effect, but could not induce differentiation of this cell line into mature eosinophilic-like cells.
- Full Text:
- Date Issued: 2007
Elephant feeding behaviour and forage offtake implications in the Addo Elephant National Park
- Authors: Lessing, Joan Susanna
- Date: 2007
- Subjects: Elephants -- South Africa -- Addo Elephant National Park , Elephants -- Behavior , Addo Elephant National Park (South Africa) , Mammals -- Behavior
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10712 , http://hdl.handle.net/10948/542 , http://hdl.handle.net/10948/d1012016 , Elephants -- South Africa -- Addo Elephant National Park , Elephants -- Behavior , Addo Elephant National Park (South Africa) , Mammals -- Behavior
- Description: Elephants, as megaherbivores and keystone species have major impacts, both positive and negative, on ecosystems such as the Subtropical Thicket of the Eastern Cape. The feeding behaviour of elephants was quantified so as to firstly determine the preferred feeding heights of elephants, and secondly to determine if feeding behaviour and impact varies with size and sex. The preferred feeding height was determined with experimental feeding trials. Feeding height, pluck size, foraging rate and the proportion of plant material discarded were used to test for differences between elephants of different sizes and sexes in the Addo Elephant National Park. The influence of plant growth form on sex-specific feeding was also considered. Elephants preferred to feed at the lowest heights. The preferred feeding height was not related to body size. A wide range of feeding heights was recorded including and extending beyond, both the preferred and maximum feeding height of co-existing indigenous browsers. There was no difference in feeding height between the sizes and sexes. In free ranging conditions, all elephants fed at levels above the preferred foraging height when browsing. There was no difference in feeding behaviour between the different sized elephants, or between males and females. Adult elephants however exhibited larger ranges of feeding heights, pluck sizes, foraging rates and intake rates, including the maximum and minimum values. Growth form influenced the feeding of male and female elephants differently. Elephant feeding behaviour appears to limit opportunities for resource partitioning by way of feeding height segregation. Elephants are also capable of dominating the browse resources available to co-existing browsers by removing large amounts of forage at lower heights. The extent of elephant impact seems to be comparable between sizes and sexes, although adults and especially larger males are often able to use foraging opportunities that other elephants can not effectively utilize. Findings suggest that the feeding heights of elephants are determined by forage availability and reflect the diet in terms of browse or grass. The findings can be used, together with browse inventory methods, to determine browse resources available to elephants, and can also be used to develop monitoring tools to assess the impacts of elephants on plants.
- Full Text:
- Date Issued: 2007
- Authors: Lessing, Joan Susanna
- Date: 2007
- Subjects: Elephants -- South Africa -- Addo Elephant National Park , Elephants -- Behavior , Addo Elephant National Park (South Africa) , Mammals -- Behavior
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10712 , http://hdl.handle.net/10948/542 , http://hdl.handle.net/10948/d1012016 , Elephants -- South Africa -- Addo Elephant National Park , Elephants -- Behavior , Addo Elephant National Park (South Africa) , Mammals -- Behavior
- Description: Elephants, as megaherbivores and keystone species have major impacts, both positive and negative, on ecosystems such as the Subtropical Thicket of the Eastern Cape. The feeding behaviour of elephants was quantified so as to firstly determine the preferred feeding heights of elephants, and secondly to determine if feeding behaviour and impact varies with size and sex. The preferred feeding height was determined with experimental feeding trials. Feeding height, pluck size, foraging rate and the proportion of plant material discarded were used to test for differences between elephants of different sizes and sexes in the Addo Elephant National Park. The influence of plant growth form on sex-specific feeding was also considered. Elephants preferred to feed at the lowest heights. The preferred feeding height was not related to body size. A wide range of feeding heights was recorded including and extending beyond, both the preferred and maximum feeding height of co-existing indigenous browsers. There was no difference in feeding height between the sizes and sexes. In free ranging conditions, all elephants fed at levels above the preferred foraging height when browsing. There was no difference in feeding behaviour between the different sized elephants, or between males and females. Adult elephants however exhibited larger ranges of feeding heights, pluck sizes, foraging rates and intake rates, including the maximum and minimum values. Growth form influenced the feeding of male and female elephants differently. Elephant feeding behaviour appears to limit opportunities for resource partitioning by way of feeding height segregation. Elephants are also capable of dominating the browse resources available to co-existing browsers by removing large amounts of forage at lower heights. The extent of elephant impact seems to be comparable between sizes and sexes, although adults and especially larger males are often able to use foraging opportunities that other elephants can not effectively utilize. Findings suggest that the feeding heights of elephants are determined by forage availability and reflect the diet in terms of browse or grass. The findings can be used, together with browse inventory methods, to determine browse resources available to elephants, and can also be used to develop monitoring tools to assess the impacts of elephants on plants.
- Full Text:
- Date Issued: 2007
Endozoochory in the subtropical thicket: comparing effects of species with different digestive systems on seed fate
- Authors: Davis, Shavaughn
- Date: 2007
- Subjects: Seeds -- Dispersal
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10714 , http://hdl.handle.net/10948/494 , http://hdl.handle.net/10948/d1012018 , Seeds -- Dispersal
- Description: Endozoochory is an important form of seed dispersal and as such plays a fundamental role in plant population and community ecology. This is especially true in the Subtropical Thicket biome where many plant species are adapted for endozoochory. Endozoochorous seed dispersal is carried out by a wide range of thicket fauna, but changes in the faunal assemblage associated with transformed thicket threatens to disrupt the process of endozoochorous seed dispersal and in turn the regeneration dynamics of thicket plants. Outside of conservation areas, indigenous seed dispersers are often replaced by domestic species, such as goats, which are hypothesized to differ in their seed dispersal efficiencies. The dispersal efficiencies of important thicket seed dispersers that occur in transformed and untransformed thicket were therefore investigated. The influence of gut morphologyphysiology on seed gut passage time, seed mortality and germination in animal species representing different digestive models was measured, as well as the role of black-backed jackal in thicket plant seed dispersal. Black-backed jackal were found to disperse the seeds of few thicket plant species and are therefore not considered important thicket seed dispersers under the climatic conditions prevailing during the study. The average gut passage time of seeds was found to differ significantly between birds and mammals, but not between elephants (hindgut fermentor), goats (ruminant) and pigs (omnivore, foregut fermentor) as was expected considering the differences in their digestive morphology. A significantly shorter gut passage of large seeds compared with small seeds was observed in goats, due to the regurgitation of larger seeds. Seed regurgitation in ruminants may prove to be an important factor contributing to their quality as seed dispersers in transformed thicket. The mortality of seeds was significantly higher in goats than in elephants, probably due to the efficient digestion associated with ruminants. The effect of gut passage on seed germination was not consistent and varied between animal species and across different thicket plant species. It was concluded that seed dispersers that occur in transformed and untransformed thicket differ in their seed dispersal efficiency due, in part, to differences in the nature of their digestive tracts. This has important implications for the process of seed dispersal in thicket, and the rehabilitation of degraded thicket vegetation.
- Full Text:
- Date Issued: 2007
- Authors: Davis, Shavaughn
- Date: 2007
- Subjects: Seeds -- Dispersal
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10714 , http://hdl.handle.net/10948/494 , http://hdl.handle.net/10948/d1012018 , Seeds -- Dispersal
- Description: Endozoochory is an important form of seed dispersal and as such plays a fundamental role in plant population and community ecology. This is especially true in the Subtropical Thicket biome where many plant species are adapted for endozoochory. Endozoochorous seed dispersal is carried out by a wide range of thicket fauna, but changes in the faunal assemblage associated with transformed thicket threatens to disrupt the process of endozoochorous seed dispersal and in turn the regeneration dynamics of thicket plants. Outside of conservation areas, indigenous seed dispersers are often replaced by domestic species, such as goats, which are hypothesized to differ in their seed dispersal efficiencies. The dispersal efficiencies of important thicket seed dispersers that occur in transformed and untransformed thicket were therefore investigated. The influence of gut morphologyphysiology on seed gut passage time, seed mortality and germination in animal species representing different digestive models was measured, as well as the role of black-backed jackal in thicket plant seed dispersal. Black-backed jackal were found to disperse the seeds of few thicket plant species and are therefore not considered important thicket seed dispersers under the climatic conditions prevailing during the study. The average gut passage time of seeds was found to differ significantly between birds and mammals, but not between elephants (hindgut fermentor), goats (ruminant) and pigs (omnivore, foregut fermentor) as was expected considering the differences in their digestive morphology. A significantly shorter gut passage of large seeds compared with small seeds was observed in goats, due to the regurgitation of larger seeds. Seed regurgitation in ruminants may prove to be an important factor contributing to their quality as seed dispersers in transformed thicket. The mortality of seeds was significantly higher in goats than in elephants, probably due to the efficient digestion associated with ruminants. The effect of gut passage on seed germination was not consistent and varied between animal species and across different thicket plant species. It was concluded that seed dispersers that occur in transformed and untransformed thicket differ in their seed dispersal efficiency due, in part, to differences in the nature of their digestive tracts. This has important implications for the process of seed dispersal in thicket, and the rehabilitation of degraded thicket vegetation.
- Full Text:
- Date Issued: 2007
Field and laboratory measurements of PMD using interferometric techniques
- Authors: Mankga, Maphuti Comfort
- Date: 2007
- Subjects: Fiber optics , Polarization (Light)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10531 , http://hdl.handle.net/10948/557 , Fiber optics , Polarization (Light)
- Description: In this study, the generalized and traditional interferometric techniques (GINTY and TINTY) are used to investigate some of the important aspects of Polarization Mode Dispersion (PMD) phenomenon in optical fibres. Measurements of PMD and chromatic dispersion (CD) are performed on buried optical fibre cable in the Pretoria Telkom’s metropolitan network. The upgradeability of this network was investigated, and it was observed that just over a half of the fibres are upgradeable to 10 Gb.s-1 transmissions. Long-haul aerial network in the Northern Cape was also tested for upgradeability to 10 Gb.s-1. It was found that 41 percent of the fibres tested are upgradeable to 10 Gb.s-1. Long-term monitoring showed that PMD varies rapidly in aerial fibres and, on the other hand, it is relatively stable in buried cables. Investigations on the accuracy of the techniques showed that polarization scrambling is essential for the reduction of the measurements uncertainties. Furthermore, it was observed that TINTY underestimates the single scan PMD distributions. The study on the effect of the change in mode coupling on various fibre configurations was performed, and fibres showed a reduction in PMD after the introduction of mode coupling. Measurements of PMD conducted in the laboratory on cabled fibre with low PMD showed the floor sensitivity of TINTY. Comparison between GINTY and Jones Matrix Eigeanalysis (JME) PMD measurements methods were performed on an emulator, and the results showed a good agreement in the measured PMD.
- Full Text:
- Date Issued: 2007
- Authors: Mankga, Maphuti Comfort
- Date: 2007
- Subjects: Fiber optics , Polarization (Light)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10531 , http://hdl.handle.net/10948/557 , Fiber optics , Polarization (Light)
- Description: In this study, the generalized and traditional interferometric techniques (GINTY and TINTY) are used to investigate some of the important aspects of Polarization Mode Dispersion (PMD) phenomenon in optical fibres. Measurements of PMD and chromatic dispersion (CD) are performed on buried optical fibre cable in the Pretoria Telkom’s metropolitan network. The upgradeability of this network was investigated, and it was observed that just over a half of the fibres are upgradeable to 10 Gb.s-1 transmissions. Long-haul aerial network in the Northern Cape was also tested for upgradeability to 10 Gb.s-1. It was found that 41 percent of the fibres tested are upgradeable to 10 Gb.s-1. Long-term monitoring showed that PMD varies rapidly in aerial fibres and, on the other hand, it is relatively stable in buried cables. Investigations on the accuracy of the techniques showed that polarization scrambling is essential for the reduction of the measurements uncertainties. Furthermore, it was observed that TINTY underestimates the single scan PMD distributions. The study on the effect of the change in mode coupling on various fibre configurations was performed, and fibres showed a reduction in PMD after the introduction of mode coupling. Measurements of PMD conducted in the laboratory on cabled fibre with low PMD showed the floor sensitivity of TINTY. Comparison between GINTY and Jones Matrix Eigeanalysis (JME) PMD measurements methods were performed on an emulator, and the results showed a good agreement in the measured PMD.
- Full Text:
- Date Issued: 2007
Improving certain high performance properties of natural fibres
- Authors: Chapple, Stephen Anthony
- Date: 2007
- Subjects: Textile chemistry , Fireproofing of fabrics
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10451 , http://hdl.handle.net/10948/815 , Textile chemistry , Fireproofing of fabrics
- Description: Cotton possesses many characteristics that make it desirable to the consumer, and this has resulted in its usage in a broad range of products. Cotton, however, is a flammable material that is easily ignited and rapidly consumed. The flame retardant treatment of cotton is, therefore, an important textile process that has received wide attention over many years. There are a number of commercial flame retardant treatments available for cotton, the most common being phosphate-based. These treatments, however, often have drawbacks or have a negative impact on the desirable properties of the fibre and the challenge still exists for designing better flame retardant products and systems that are durable and have limited impact on fibre properties. The study considers the application of the sol-gel as a coating on fabric that was pre-treated with a phosphate-based flame retardant or as a means for applying a phosphate-based flame retardant. Both treatment methods were found to be suitable for imparting flame resistance to the fabric. The effect of various phosphate-based flame retardants on flammability and fabric properties such as colour, handle and strength was investigated and it was shown that a diammonium phosphate and urea combination gave the best flame resistance. In this regard, a flame resistance was achieved with a lower amount of phosphorous than was used in similar conventional treatments. The durability of the coating to rinsing with water and soaping with a detergent was also investigated. It was found that the flame resistance was lost after rinsing or soaping but the prevention of afterglow combustion was retained. It was shown that the preparatory treatment of the fabric influenced the sol-gel coating process and the flammability of the fabric. Mercerisation and bleaching of the fabric increased the “wet pick-up” during the coating process and improved the flame resistance. The influence of various factors was also investigated in further detail. The ratio of the sol-gel components, the delay after coating prior to drying (hang time) and the curing time were investigated using an experimental design. The curing time and the ratio of components in the sol-gel were shown to have the greatest influence on fabric properties and fabric flammability. It was shown that there is a trade-off between the desired high level of fabric flame resistance and preserving the inherent properties of the fabric such as colour, handle and strength.
- Full Text:
- Date Issued: 2007
- Authors: Chapple, Stephen Anthony
- Date: 2007
- Subjects: Textile chemistry , Fireproofing of fabrics
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10451 , http://hdl.handle.net/10948/815 , Textile chemistry , Fireproofing of fabrics
- Description: Cotton possesses many characteristics that make it desirable to the consumer, and this has resulted in its usage in a broad range of products. Cotton, however, is a flammable material that is easily ignited and rapidly consumed. The flame retardant treatment of cotton is, therefore, an important textile process that has received wide attention over many years. There are a number of commercial flame retardant treatments available for cotton, the most common being phosphate-based. These treatments, however, often have drawbacks or have a negative impact on the desirable properties of the fibre and the challenge still exists for designing better flame retardant products and systems that are durable and have limited impact on fibre properties. The study considers the application of the sol-gel as a coating on fabric that was pre-treated with a phosphate-based flame retardant or as a means for applying a phosphate-based flame retardant. Both treatment methods were found to be suitable for imparting flame resistance to the fabric. The effect of various phosphate-based flame retardants on flammability and fabric properties such as colour, handle and strength was investigated and it was shown that a diammonium phosphate and urea combination gave the best flame resistance. In this regard, a flame resistance was achieved with a lower amount of phosphorous than was used in similar conventional treatments. The durability of the coating to rinsing with water and soaping with a detergent was also investigated. It was found that the flame resistance was lost after rinsing or soaping but the prevention of afterglow combustion was retained. It was shown that the preparatory treatment of the fabric influenced the sol-gel coating process and the flammability of the fabric. Mercerisation and bleaching of the fabric increased the “wet pick-up” during the coating process and improved the flame resistance. The influence of various factors was also investigated in further detail. The ratio of the sol-gel components, the delay after coating prior to drying (hang time) and the curing time were investigated using an experimental design. The curing time and the ratio of components in the sol-gel were shown to have the greatest influence on fabric properties and fabric flammability. It was shown that there is a trade-off between the desired high level of fabric flame resistance and preserving the inherent properties of the fabric such as colour, handle and strength.
- Full Text:
- Date Issued: 2007
In vitro testing to investigate the anticoagulant/antithrombotic and antidiabetic biological activity of Leonotis Leonurus
- Authors: Mnonopi, Nandipha Olivia
- Date: 2007
- Subjects: Leonotis leonurus -- Physiological aspects , Medicinal plants -- South Africa , Materia medica, Vegetable -- South Africa , Plant bioactive compounds
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10331 , http://hdl.handle.net/10948/693 , Leonotis leonurus -- Physiological aspects , Medicinal plants -- South Africa , Materia medica, Vegetable -- South Africa , Plant bioactive compounds
- Description: The rising costs of prescription drugs in the maintenance of personal health and wellbeing have increased the interest in medicinal plants. The World Health Organization estimates that 65 percent-80 percent of the world’s population use traditional medicine as their primary form of health care. In this project the focus has been on the use of Leonotis leonurus extracts as a traditional medicine. The major chemical constituent of this plant is marrubiin, which is a diterpenoid labdane lactone formed from a precursor called premarrubiin. Aqueous and acetone extract (AL and OL extract, respectively) of this plant has been found to have an antithrombotic effect, with IC50 values of 3mg/ml and 6mg/ml, respectively. The extracts also have an effect on fibrinolysis, where the lysis time was decreased by more than 50 percent by the organic extract and standard marrubiin. In whole blood ADP-induced platelet aggregation, the organic extract inhibited aggregation by 68 percent at a final concentration of 138μg/ml (equivalent to 7.2μg/ml marrubiin). Marrubiin has also been screened for antithrombotic/anticoagulant activity; no antithrombotic activity has been observed but it increased the rate of fibrinolysis, by decreasing lysis time by 64 percent and also decreasing fibrin formation. From these findings it can be concluded that marrubiin has a fibrinolytic effect and antiplatelet aggregation effect. In the diabetic studies, in hyperglycemic condition, the OL (10μg/ml) extract and standard marrubiin significantly increased insulin secretion by 200 percent (2-fold) and 400 percent (4-fold), respectively, with respect to the control. The OL extract and standard marrubiin stimulated the release of insulin, the stimulatory index was significantly increased by 450 percent (4.5-fold) and 500 percent (5-fold), respectively, with respect to the control. In the apoptotic studies, in the normoglycemic and hyperglycemic conditions, the OL extract decreased the occurrence of apoptosis, in a dose-dependent manner, with the lower concentrations inducing apoptosis significantly higher than the relevant controls. Standard marrubiin did not have an effect on apoptosis in hyperglycemic condition, but it decreased the occurrence of apoptosis by 200 percent (2-fold) under normoglycemic conditions. The OL extract increased proliferation by 148 percent (1.48- fold) and 155 percent (1.55-fold) in normoglycemic and hyperglycemic conditions, respectively. The same effect was observed for standard marrubiin, where, proliferation was increased by 180 percent (1.8-fold) and 200 percent (2.0-fold) in normoglycemic and hyperglycemic conditions, respectively. RT-PCR displayed that standard marrubiin inhibited the expression of insulin by 50 percent under normoglycemic conditions.
- Full Text:
- Date Issued: 2007
- Authors: Mnonopi, Nandipha Olivia
- Date: 2007
- Subjects: Leonotis leonurus -- Physiological aspects , Medicinal plants -- South Africa , Materia medica, Vegetable -- South Africa , Plant bioactive compounds
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10331 , http://hdl.handle.net/10948/693 , Leonotis leonurus -- Physiological aspects , Medicinal plants -- South Africa , Materia medica, Vegetable -- South Africa , Plant bioactive compounds
- Description: The rising costs of prescription drugs in the maintenance of personal health and wellbeing have increased the interest in medicinal plants. The World Health Organization estimates that 65 percent-80 percent of the world’s population use traditional medicine as their primary form of health care. In this project the focus has been on the use of Leonotis leonurus extracts as a traditional medicine. The major chemical constituent of this plant is marrubiin, which is a diterpenoid labdane lactone formed from a precursor called premarrubiin. Aqueous and acetone extract (AL and OL extract, respectively) of this plant has been found to have an antithrombotic effect, with IC50 values of 3mg/ml and 6mg/ml, respectively. The extracts also have an effect on fibrinolysis, where the lysis time was decreased by more than 50 percent by the organic extract and standard marrubiin. In whole blood ADP-induced platelet aggregation, the organic extract inhibited aggregation by 68 percent at a final concentration of 138μg/ml (equivalent to 7.2μg/ml marrubiin). Marrubiin has also been screened for antithrombotic/anticoagulant activity; no antithrombotic activity has been observed but it increased the rate of fibrinolysis, by decreasing lysis time by 64 percent and also decreasing fibrin formation. From these findings it can be concluded that marrubiin has a fibrinolytic effect and antiplatelet aggregation effect. In the diabetic studies, in hyperglycemic condition, the OL (10μg/ml) extract and standard marrubiin significantly increased insulin secretion by 200 percent (2-fold) and 400 percent (4-fold), respectively, with respect to the control. The OL extract and standard marrubiin stimulated the release of insulin, the stimulatory index was significantly increased by 450 percent (4.5-fold) and 500 percent (5-fold), respectively, with respect to the control. In the apoptotic studies, in the normoglycemic and hyperglycemic conditions, the OL extract decreased the occurrence of apoptosis, in a dose-dependent manner, with the lower concentrations inducing apoptosis significantly higher than the relevant controls. Standard marrubiin did not have an effect on apoptosis in hyperglycemic condition, but it decreased the occurrence of apoptosis by 200 percent (2-fold) under normoglycemic conditions. The OL extract increased proliferation by 148 percent (1.48- fold) and 155 percent (1.55-fold) in normoglycemic and hyperglycemic conditions, respectively. The same effect was observed for standard marrubiin, where, proliferation was increased by 180 percent (1.8-fold) and 200 percent (2.0-fold) in normoglycemic and hyperglycemic conditions, respectively. RT-PCR displayed that standard marrubiin inhibited the expression of insulin by 50 percent under normoglycemic conditions.
- Full Text:
- Date Issued: 2007
Investigating the influences of validation on pharmaceutical manufacturing processes
- Authors: Muller, Damian Christian
- Date: 2007
- Subjects: Pharmaceutical industry -- Quality control , Pharmaceutical technology , Drugs -- Standards
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10412 , http://hdl.handle.net/10948/566 , Pharmaceutical industry -- Quality control , Pharmaceutical technology , Drugs -- Standards
- Description: This investigation attempts to examine the influences of validation on pharmaceutical processes especially at a new manufacturing facility that has to meet international requirements, and fulfil a cost effective business strategy. At Aspen Pharmacare, a pharmaceutical organisation, there are two manufacturing facilities situated adjacent to each other, one new and one old. The new facility creates ideal opportunities to supply products to local and international markets. The investigation compares legal requirements from local and international regulatory authorities. Validation and qualification practices as well as the problems encountered during the different phases are discussed. Particular attention is given to the validation approach at the new Aspen facility. Problems and proposed solutions relating to the design review, installation, operational, and performance qualification are discussed. Validation of analytical methods for cleaning analysis, cleaning validation of equipment, and optimisation of some tablet manufacturing processes are described. Statistical evaluations of analytical results are included to find the optimum conditions for integrating new personnel with new processes and equipment. A business model reviews the cost of non-conformances of the enalapril maleate 10 mg tablets manufactured at the two manufacturing facilities. Finally the dissertation proves that validation is not only a regulatory requirement but that it also provides benefits such as adding value to the business, and ultimately reducing the cost of medicines.
- Full Text:
- Date Issued: 2007
- Authors: Muller, Damian Christian
- Date: 2007
- Subjects: Pharmaceutical industry -- Quality control , Pharmaceutical technology , Drugs -- Standards
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10412 , http://hdl.handle.net/10948/566 , Pharmaceutical industry -- Quality control , Pharmaceutical technology , Drugs -- Standards
- Description: This investigation attempts to examine the influences of validation on pharmaceutical processes especially at a new manufacturing facility that has to meet international requirements, and fulfil a cost effective business strategy. At Aspen Pharmacare, a pharmaceutical organisation, there are two manufacturing facilities situated adjacent to each other, one new and one old. The new facility creates ideal opportunities to supply products to local and international markets. The investigation compares legal requirements from local and international regulatory authorities. Validation and qualification practices as well as the problems encountered during the different phases are discussed. Particular attention is given to the validation approach at the new Aspen facility. Problems and proposed solutions relating to the design review, installation, operational, and performance qualification are discussed. Validation of analytical methods for cleaning analysis, cleaning validation of equipment, and optimisation of some tablet manufacturing processes are described. Statistical evaluations of analytical results are included to find the optimum conditions for integrating new personnel with new processes and equipment. A business model reviews the cost of non-conformances of the enalapril maleate 10 mg tablets manufactured at the two manufacturing facilities. Finally the dissertation proves that validation is not only a regulatory requirement but that it also provides benefits such as adding value to the business, and ultimately reducing the cost of medicines.
- Full Text:
- Date Issued: 2007
Ionic liquids as media for electro-organic synthesis
- Authors: Kruger, Elna
- Date: 2007
- Subjects: Ionic solutions , Inorganic compounds -- Synthesis , Electrochemistry
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10413 , http://hdl.handle.net/10948/538 , Ionic solutions , Inorganic compounds -- Synthesis , Electrochemistry
- Description: The IL’s used in this study were either synthesized or commercially available. Preparation of the IL’s involved 2 step processes: firstly the heating of distilled 1-methylimidazole with distilled 1-chlorobutane under reflux to obtain 1-butyl-3- methylimidazolium chloride; secondly, the metathesis reaction of sodium tetrafluoroborate with 1-butyl-3-methylimidazolium chloride to obtain 1-butyl-3- methylimidazolium tetrafluoroborate. The addition of sodium tetrafluoroborate, sodium hexafluorophosphate and lithium trifluoromethane sulfonamide with 1-butyl-3-methylimidazolium chloride produced good yields of 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium hexafluorophosphate and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide respectively. The IL’s are hygroscopic and must be stored under a nitrogen atmosphere. The IL’s were analyzed using 1H and 13C NMR analysis with CDCl3 as solvent. The physical and chemical properties of these IL’s were compared to commercial products. The physical and chemical properties compared well to reference values from the literature. The physical properties measured include the density, conductivity and electrochemical window. The electrochemical window is dependant primarily on the resistance of the cation to reduction and the resistance of the anion to oxidation. The electrochemical windows of the IL’s were very similar to the reference windows obtained from literature and it can be seen that some IL’s have a slightly lower window which can be due to water present. Water content in the IL’s was determined with the use of a Karl Fischer titrator, with Hydranal 5 Composite as titrant and HPLC grade methanol as the base. The concentration of halide in the IL’s was determined with a Perkin-Elmer ICP-MS.
- Full Text:
- Date Issued: 2007
- Authors: Kruger, Elna
- Date: 2007
- Subjects: Ionic solutions , Inorganic compounds -- Synthesis , Electrochemistry
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10413 , http://hdl.handle.net/10948/538 , Ionic solutions , Inorganic compounds -- Synthesis , Electrochemistry
- Description: The IL’s used in this study were either synthesized or commercially available. Preparation of the IL’s involved 2 step processes: firstly the heating of distilled 1-methylimidazole with distilled 1-chlorobutane under reflux to obtain 1-butyl-3- methylimidazolium chloride; secondly, the metathesis reaction of sodium tetrafluoroborate with 1-butyl-3-methylimidazolium chloride to obtain 1-butyl-3- methylimidazolium tetrafluoroborate. The addition of sodium tetrafluoroborate, sodium hexafluorophosphate and lithium trifluoromethane sulfonamide with 1-butyl-3-methylimidazolium chloride produced good yields of 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium hexafluorophosphate and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide respectively. The IL’s are hygroscopic and must be stored under a nitrogen atmosphere. The IL’s were analyzed using 1H and 13C NMR analysis with CDCl3 as solvent. The physical and chemical properties of these IL’s were compared to commercial products. The physical and chemical properties compared well to reference values from the literature. The physical properties measured include the density, conductivity and electrochemical window. The electrochemical window is dependant primarily on the resistance of the cation to reduction and the resistance of the anion to oxidation. The electrochemical windows of the IL’s were very similar to the reference windows obtained from literature and it can be seen that some IL’s have a slightly lower window which can be due to water present. Water content in the IL’s was determined with the use of a Karl Fischer titrator, with Hydranal 5 Composite as titrant and HPLC grade methanol as the base. The concentration of halide in the IL’s was determined with a Perkin-Elmer ICP-MS.
- Full Text:
- Date Issued: 2007
Isolation of bioactive metabolites with activity against HIV-1 target proteins from extracts of Sutherlandia frutescens and Lobostemon trigonus
- Authors: Dambuza, Ntokozo Shirley
- Date: 2007
- Subjects: Medicinal plants -- Africa, Southern , HIV infections -- Alternative treatment -- Africa, Southern , Plant bioactive compounds
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10335 , http://hdl.handle.net/10948/492 , http://hdl.handle.net/10948/d1012003 , Medicinal plants -- Africa, Southern , HIV infections -- Alternative treatment -- Africa, Southern , Plant bioactive compounds
- Description: Acquired Immunodeficiency Syndrome (AIDS) is a human disease caused by the human immunodeficiency virus type 1 (HIV-1) and it is one of the biggest social, economic and health challenges in the world. The Joint United Nations Programme on HIV/AIDS (UNAIDS) and World Health Organization (WHO) estimated that between 33.4 to 46.0 million people around the world were living with HIV/AIDS in December 2005 and the highest estimates are in the Sub-Saharan Africa (around 25 million). In more developed countries a combined antiretroviral therapy called highly active antiretroviral therapy (HAART) is used, which results in reduced progression to AIDS in most patients. Despite the beneficial effects of HAART, significant side effects are experienced by treated patients. In addition, most infected people live in countries where the treatment is very expensive or, in many cases, not available at all. These people therefore rely on medicinal plants for health care. In this study, aqueous extracts from Sutherlandia frutescens and Lobostemon trigonus were screened for potential anti-HIV activities in a series of in vitro enzymatic assays, including reverse transcriptase, HIV-1 protease and glycohydrolases. Two extracts of Sutherlandia leaves (SFL-1 and SFL-2) were prepared that inhibited HIV reverse transcriptase and a Lobostemon leaf extract (LTL) was shown to also inhibit this enzyme. All extracts were assayed at 1.25mg/ml. Tannin content was determined for all active extracts using a tannic acid assay. SFL-1 and SFL-2 were found to contain about 6 percent and 7 percent tannins, respectively, and LTL contained 31% tannins by weight. Tannins were removed using polyamide columns and three fractions were collected for each. The extracts were also fractionated with Sephadex G-25, Amberlite IR 120 and Dowex 1-X8 as size exclusion, cation exchange and anion exchange, respectively. Extracts were also fractionated by preparative thin layer chromatography where two compounds were separated from S. frutescens extract with high activity against reverse transcriptase while showing insignificant inhibition towards other enzymes tested. SFL-BFW-10 and SFL-WEF-7 inhibited reverse transcriptase by almost 100 percent and the IC50 values calculated for these compounds were 0.34 and 0.23mg/ml, respectively. Cytotoxicity of these compounds was evaluated on Chang liver cells and peripheral blood mononuclear cells (PBMCs). None of these compounds showed any significant inhibition of cell proliferation. The purity of these compounds could not be confirmed because there was insufficient material to use in the techniques required to show purity and identification. Therefore, TLC was used to determine the nature of these compounds. SFL-BFW-10 was identified as an organic acid and SFL-WEF-7 was identified as flavonoid.
- Full Text:
- Date Issued: 2007
- Authors: Dambuza, Ntokozo Shirley
- Date: 2007
- Subjects: Medicinal plants -- Africa, Southern , HIV infections -- Alternative treatment -- Africa, Southern , Plant bioactive compounds
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10335 , http://hdl.handle.net/10948/492 , http://hdl.handle.net/10948/d1012003 , Medicinal plants -- Africa, Southern , HIV infections -- Alternative treatment -- Africa, Southern , Plant bioactive compounds
- Description: Acquired Immunodeficiency Syndrome (AIDS) is a human disease caused by the human immunodeficiency virus type 1 (HIV-1) and it is one of the biggest social, economic and health challenges in the world. The Joint United Nations Programme on HIV/AIDS (UNAIDS) and World Health Organization (WHO) estimated that between 33.4 to 46.0 million people around the world were living with HIV/AIDS in December 2005 and the highest estimates are in the Sub-Saharan Africa (around 25 million). In more developed countries a combined antiretroviral therapy called highly active antiretroviral therapy (HAART) is used, which results in reduced progression to AIDS in most patients. Despite the beneficial effects of HAART, significant side effects are experienced by treated patients. In addition, most infected people live in countries where the treatment is very expensive or, in many cases, not available at all. These people therefore rely on medicinal plants for health care. In this study, aqueous extracts from Sutherlandia frutescens and Lobostemon trigonus were screened for potential anti-HIV activities in a series of in vitro enzymatic assays, including reverse transcriptase, HIV-1 protease and glycohydrolases. Two extracts of Sutherlandia leaves (SFL-1 and SFL-2) were prepared that inhibited HIV reverse transcriptase and a Lobostemon leaf extract (LTL) was shown to also inhibit this enzyme. All extracts were assayed at 1.25mg/ml. Tannin content was determined for all active extracts using a tannic acid assay. SFL-1 and SFL-2 were found to contain about 6 percent and 7 percent tannins, respectively, and LTL contained 31% tannins by weight. Tannins were removed using polyamide columns and three fractions were collected for each. The extracts were also fractionated with Sephadex G-25, Amberlite IR 120 and Dowex 1-X8 as size exclusion, cation exchange and anion exchange, respectively. Extracts were also fractionated by preparative thin layer chromatography where two compounds were separated from S. frutescens extract with high activity against reverse transcriptase while showing insignificant inhibition towards other enzymes tested. SFL-BFW-10 and SFL-WEF-7 inhibited reverse transcriptase by almost 100 percent and the IC50 values calculated for these compounds were 0.34 and 0.23mg/ml, respectively. Cytotoxicity of these compounds was evaluated on Chang liver cells and peripheral blood mononuclear cells (PBMCs). None of these compounds showed any significant inhibition of cell proliferation. The purity of these compounds could not be confirmed because there was insufficient material to use in the techniques required to show purity and identification. Therefore, TLC was used to determine the nature of these compounds. SFL-BFW-10 was identified as an organic acid and SFL-WEF-7 was identified as flavonoid.
- Full Text:
- Date Issued: 2007
Micellar-enhanced ultrafiltration of palladium and platinum anions
- Authors: Gwicana, Sakumzi
- Date: 2007
- Subjects: Micelles , Ultrafiltration , Palladium catalysts
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10414 , http://hdl.handle.net/10948/518 , Micelles , Ultrafiltration , Palladium catalysts
- Description: The project was concerned with studying the capability of a micellar-enhanced ultrafiltration system (MEUF) to remove platinum group metal ions namely Pt (lV) and Pd (ll) chloro anions from aqueous industrial waste effluents. South Africa has the world’s largest reserves of platinum group metals (PGMs) and other valuable metals such as manganese, chrome ores, titanium minerals etc. which are required for new automotive and other technologies, including fuel cells, catalytic converters and lighter components. The consistent loss with the industrial waste stream and the toxicological effects of these precious metals led to the need to develop new and effective methods to recover them from industrial waste effluents. With such a wide variety of fields where these PGMs are used and the failure of the traditional techniques namely sedimentation, fermentation etc. to effectively reduce or recover these highly toxic and precious metal ions prior to discharging industrial waste effluents, it is necessary to explore other techniques such as membrane technology that can be used to recover these valuable species from industrial waste streams. The present study involved the use of a cationic surfactant, viz cetylpyridinium chloride, which was introduced into an aqueous solution containing palladium and platinum metal anions. The surfactant forms charged micelles above a certain critical concentration value. The metal anions adsorb onto the available oppositely charged sites on the micelle surfaces and are then able to be retained by a suitable membrane. Hollow fibre ultrafiltration membranes with the MWCO of +/- 10 kD and +/-30nm pore size were used as a filter component in this study. For this MEUF system to be effective, it was vital that the anionic metal ion species adsorbed sufficiently onto the available oppositely charged sites of the micelles and that the micelles were retained efficiently by the membrane. Results obtained during the investigation made it possible to make certain predictions about the micellisation process. It was also found that, it was not only the metal ion: surfactant (M:S) ratio that was critical, but the presence of other electrolytes in the aqueous stream proved to have a huge impact on the capability of the MEUF system. Findings of this research study showed that the MEUF system using cetylpyridinium chloride (CPC) can be used to recover or retain Pt (lV) and Pd (ll) anions from industrial waste effluents. It was also found that PtCl6 2-, due to its greater adsorption capabilities onto the micelle surface than PdCl4 2- or PdCl3(H2O)-, was preferentially retained in neutral medium. This may be exploited as a possible means of separating the two metal ions. The developed system offers the following advantages over some traditional and current methods: simplified unit operation line flow process, smaller amounts of chemical usage and no solid toxic sludge to be disposed of. Applications of this work could be of vital importance in catalytic converter recycling, especially in Port Elizabeth where extensive automobile parts manufacturing occurs.
- Full Text:
- Date Issued: 2007
- Authors: Gwicana, Sakumzi
- Date: 2007
- Subjects: Micelles , Ultrafiltration , Palladium catalysts
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10414 , http://hdl.handle.net/10948/518 , Micelles , Ultrafiltration , Palladium catalysts
- Description: The project was concerned with studying the capability of a micellar-enhanced ultrafiltration system (MEUF) to remove platinum group metal ions namely Pt (lV) and Pd (ll) chloro anions from aqueous industrial waste effluents. South Africa has the world’s largest reserves of platinum group metals (PGMs) and other valuable metals such as manganese, chrome ores, titanium minerals etc. which are required for new automotive and other technologies, including fuel cells, catalytic converters and lighter components. The consistent loss with the industrial waste stream and the toxicological effects of these precious metals led to the need to develop new and effective methods to recover them from industrial waste effluents. With such a wide variety of fields where these PGMs are used and the failure of the traditional techniques namely sedimentation, fermentation etc. to effectively reduce or recover these highly toxic and precious metal ions prior to discharging industrial waste effluents, it is necessary to explore other techniques such as membrane technology that can be used to recover these valuable species from industrial waste streams. The present study involved the use of a cationic surfactant, viz cetylpyridinium chloride, which was introduced into an aqueous solution containing palladium and platinum metal anions. The surfactant forms charged micelles above a certain critical concentration value. The metal anions adsorb onto the available oppositely charged sites on the micelle surfaces and are then able to be retained by a suitable membrane. Hollow fibre ultrafiltration membranes with the MWCO of +/- 10 kD and +/-30nm pore size were used as a filter component in this study. For this MEUF system to be effective, it was vital that the anionic metal ion species adsorbed sufficiently onto the available oppositely charged sites of the micelles and that the micelles were retained efficiently by the membrane. Results obtained during the investigation made it possible to make certain predictions about the micellisation process. It was also found that, it was not only the metal ion: surfactant (M:S) ratio that was critical, but the presence of other electrolytes in the aqueous stream proved to have a huge impact on the capability of the MEUF system. Findings of this research study showed that the MEUF system using cetylpyridinium chloride (CPC) can be used to recover or retain Pt (lV) and Pd (ll) anions from industrial waste effluents. It was also found that PtCl6 2-, due to its greater adsorption capabilities onto the micelle surface than PdCl4 2- or PdCl3(H2O)-, was preferentially retained in neutral medium. This may be exploited as a possible means of separating the two metal ions. The developed system offers the following advantages over some traditional and current methods: simplified unit operation line flow process, smaller amounts of chemical usage and no solid toxic sludge to be disposed of. Applications of this work could be of vital importance in catalytic converter recycling, especially in Port Elizabeth where extensive automobile parts manufacturing occurs.
- Full Text:
- Date Issued: 2007
MOCVD growth and electrical characterisation of InAs thin films
- Authors: Shamba, Precious
- Date: 2007
- Subjects: Metal organic chemical vapor deposition
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10527 , http://hdl.handle.net/10948/706 , Metal organic chemical vapor deposition
- Description: In this work, a systematic study relating the surface morphologies, electrical and structural properties of both doped and undoped InAs and InAsSb epitaxial films grown by metalorganic chemical vapour deposition (MOCVD) was undertaken. A comparative study using TBAs and AsH3 as the group V source in the growth of InAs revealed a considerable improvement, primarily in the electrical properties of InAs grown using TBAs with no significant difference in the surface morphology. InAs layers grown using TBAs, exhibited superior 77 K mobilities of up to 46 000 cm2/Vs, exceeding the best MOCVD data to date. The feasibility of tetraethyl tin (TESn) as an n-type dopant in InAs was to our knowledge investigated for the first time. The incorporation efficiency of this dopant was extensively studied as a function of substrate temperature, V/III ratio, substrate orientation and TESn flow rate. Results from this study show that the doping efficiency is temperature dependent and is not influenced by a variation of the V/III ratio or substrate orientation. Furthermore, Sn doping concentrations could be controlled over 2 orders of magnitude ranging between 2.7 x 1017 and 4.7 x 1019 cm-3 with 77 K mobilities ranging from 12 000 to 1300 cm2/Vs. The electrical properties of zinc doped InAs employing dimethyl zinc (DMZn) as the ptype dopant, were studied as a function of V/III ratio and substrate orientation. The effect of a variation of these parameters on the structural properties and surface morphology of InAs is also reported. The substrate orientation appears to have no influence on the Zn incorporation. An increase in Zn incorporation resulted in a deterioration of both the surface morphology and structural quality of the InAs layers. The incorporation efficiency of DMZn in InAsSb was studied as a function of growth temperature, V/III ratio and DMZn flow rate. A higher Zn incorporation was observed in InAsSb epitaxial layers grown at a lower temperature and V/III ratio as opposed to the layers grown at a higher temperature and V/III ratio. This study also revealed that the use of DMZn caused a dopant memory effect. A two-layer model proposed by Nedoluha and Koch (1952) was used to simulate the Hall measurements of Zn doped InAs and InAsSb in order to correct the shortcomings of conventional Hall measurements in determining the electrical properties exhibited by these materials.
- Full Text:
- Date Issued: 2007
- Authors: Shamba, Precious
- Date: 2007
- Subjects: Metal organic chemical vapor deposition
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10527 , http://hdl.handle.net/10948/706 , Metal organic chemical vapor deposition
- Description: In this work, a systematic study relating the surface morphologies, electrical and structural properties of both doped and undoped InAs and InAsSb epitaxial films grown by metalorganic chemical vapour deposition (MOCVD) was undertaken. A comparative study using TBAs and AsH3 as the group V source in the growth of InAs revealed a considerable improvement, primarily in the electrical properties of InAs grown using TBAs with no significant difference in the surface morphology. InAs layers grown using TBAs, exhibited superior 77 K mobilities of up to 46 000 cm2/Vs, exceeding the best MOCVD data to date. The feasibility of tetraethyl tin (TESn) as an n-type dopant in InAs was to our knowledge investigated for the first time. The incorporation efficiency of this dopant was extensively studied as a function of substrate temperature, V/III ratio, substrate orientation and TESn flow rate. Results from this study show that the doping efficiency is temperature dependent and is not influenced by a variation of the V/III ratio or substrate orientation. Furthermore, Sn doping concentrations could be controlled over 2 orders of magnitude ranging between 2.7 x 1017 and 4.7 x 1019 cm-3 with 77 K mobilities ranging from 12 000 to 1300 cm2/Vs. The electrical properties of zinc doped InAs employing dimethyl zinc (DMZn) as the ptype dopant, were studied as a function of V/III ratio and substrate orientation. The effect of a variation of these parameters on the structural properties and surface morphology of InAs is also reported. The substrate orientation appears to have no influence on the Zn incorporation. An increase in Zn incorporation resulted in a deterioration of both the surface morphology and structural quality of the InAs layers. The incorporation efficiency of DMZn in InAsSb was studied as a function of growth temperature, V/III ratio and DMZn flow rate. A higher Zn incorporation was observed in InAsSb epitaxial layers grown at a lower temperature and V/III ratio as opposed to the layers grown at a higher temperature and V/III ratio. This study also revealed that the use of DMZn caused a dopant memory effect. A two-layer model proposed by Nedoluha and Koch (1952) was used to simulate the Hall measurements of Zn doped InAs and InAsSb in order to correct the shortcomings of conventional Hall measurements in determining the electrical properties exhibited by these materials.
- Full Text:
- Date Issued: 2007
On the characterization of photovoltaic devices for concentrator purposes
- Authors: Vorster, Frederick Jacobus
- Date: 2007
- Subjects: Photovoltaic cells , Image processing , Solar cells
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10530 , http://hdl.handle.net/10948/639 , Photovoltaic cells , Image processing , Solar cells
- Description: This study originated from an evaluation of the performance of a commercially available high concentration point focus concentrator PV system. The effect of module design flaws was studied by using current-voltage (I-V) curves obtained from each module in the array. The position of reverse bias steps revealed the severity of mismatch in a string of series-connected cells. By understanding the effects of the various types of mismatch, power losses and damage to the solar cells resulting from hot spot formation can be minimized and several recommendations for improving the basic performance of similar systems were made. Concern over the extent and type of defect failure of the concentrator photovoltaic (CPV) cells prompted an investigation into the use of a light beam induced current (LBIC) technique to investigate the spatial distribution of defects. An overview of current and developing LBIC techniques revealed that the original standard LBIC techniques have found widespread application, and that far-reaching and important developments of the technique have taken place over the years. These developments are driven by natural progression as well as the availability of newly developed advanced measurement equipment. Several techniques such as Lock-in hermography and the use of infrared cameras have developed as complementary techniques to advanced LBIC techniques. As an accurate contactless evaluation tool that is able to image spatially distributed defects in cell material, the basis of this method seemed promising for the evaluation of concentrator cells.
- Full Text:
- Date Issued: 2007
- Authors: Vorster, Frederick Jacobus
- Date: 2007
- Subjects: Photovoltaic cells , Image processing , Solar cells
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10530 , http://hdl.handle.net/10948/639 , Photovoltaic cells , Image processing , Solar cells
- Description: This study originated from an evaluation of the performance of a commercially available high concentration point focus concentrator PV system. The effect of module design flaws was studied by using current-voltage (I-V) curves obtained from each module in the array. The position of reverse bias steps revealed the severity of mismatch in a string of series-connected cells. By understanding the effects of the various types of mismatch, power losses and damage to the solar cells resulting from hot spot formation can be minimized and several recommendations for improving the basic performance of similar systems were made. Concern over the extent and type of defect failure of the concentrator photovoltaic (CPV) cells prompted an investigation into the use of a light beam induced current (LBIC) technique to investigate the spatial distribution of defects. An overview of current and developing LBIC techniques revealed that the original standard LBIC techniques have found widespread application, and that far-reaching and important developments of the technique have taken place over the years. These developments are driven by natural progression as well as the availability of newly developed advanced measurement equipment. Several techniques such as Lock-in hermography and the use of infrared cameras have developed as complementary techniques to advanced LBIC techniques. As an accurate contactless evaluation tool that is able to image spatially distributed defects in cell material, the basis of this method seemed promising for the evaluation of concentrator cells.
- Full Text:
- Date Issued: 2007
On the microstructure and physical properties of hot pressed (Hf, Ti) C
- Authors: Heiligers, Christiané
- Date: 2007
- Subjects: Transition metal carbides
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10532 , http://hdl.handle.net/10948/523 , http://hdl.handle.net/10948/d1011722 , Transition metal carbides
- Description: The microstructure and physical properties of hot pressed (Hf, Ti) C have been investigated with the aim of producing a cutting tool material with similar hardness to that of WC-Co and TiC-based cermets. Sintered samples were hot pressed from HfC0.7 and TiC0.9 powders using powder metallurgical techniques and the processing cycle was optimized for this system. Ni was used as a binder in selected samples and C black was added to compensate for sub-stoichiometry and to aid in the reduction of oxides formed during milling. Microstructural analyses were performed by scanning and transmission electron microscopy (SEM and TEM) and the composition was determined from X-ray diffraction (XRD) and energy dispersive X-ray spectrometry (EDS). The physical properties measured are density and Vickers hardness, and the indentation fracture toughness was determined using the Shetty formula. The fundamental interactions between HfC, TiC and Ni during hot pressing were investigated and the results obtained used to explain the microstructure that develops in samples made from powder mixtures. The interactions studied are the inter-diffusion of HfC and TiC through the solid state, and the dissolution and re-precipitation rate of the carbides in a liquid Ni binder. EDS analysis revealed that the rate at which Ti diffuses into HfC is higher than the rate at which Hf diffuses into TiC. Upper limits to the diffusion coefficients for these processes are determined and show that solid solution carbides will form from HfC + TiC powder mixtures at 2000 ºC in 1 hour if the average powder particle size is less than 5 μm. The diffusion rates decrease with a decrease in hot pressing temperature but mass transport between the phases can be enhanced by addition of a metallic binder. TEM and EDS analysis shows that Ni wets TiC more efficiently than HfC and that the solubility of TiC in Ni is also higher than that of HfC. The grain size of the carbide phases increases with an increase in the rate at which they dissolve into and re-precipitate from the liquid binder. The crystal structure of the binder phase depends on the concentration of Ti and Hf that remain in the binder after cooling and the carbide phase in which the binder is embedded. Analysis of TEM electron diffraction patterns show that the binder phase consists of cubic solid solutions as well as intermetallic and cubic phases in which atomic ordering is observed.
- Full Text:
- Date Issued: 2007
- Authors: Heiligers, Christiané
- Date: 2007
- Subjects: Transition metal carbides
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10532 , http://hdl.handle.net/10948/523 , http://hdl.handle.net/10948/d1011722 , Transition metal carbides
- Description: The microstructure and physical properties of hot pressed (Hf, Ti) C have been investigated with the aim of producing a cutting tool material with similar hardness to that of WC-Co and TiC-based cermets. Sintered samples were hot pressed from HfC0.7 and TiC0.9 powders using powder metallurgical techniques and the processing cycle was optimized for this system. Ni was used as a binder in selected samples and C black was added to compensate for sub-stoichiometry and to aid in the reduction of oxides formed during milling. Microstructural analyses were performed by scanning and transmission electron microscopy (SEM and TEM) and the composition was determined from X-ray diffraction (XRD) and energy dispersive X-ray spectrometry (EDS). The physical properties measured are density and Vickers hardness, and the indentation fracture toughness was determined using the Shetty formula. The fundamental interactions between HfC, TiC and Ni during hot pressing were investigated and the results obtained used to explain the microstructure that develops in samples made from powder mixtures. The interactions studied are the inter-diffusion of HfC and TiC through the solid state, and the dissolution and re-precipitation rate of the carbides in a liquid Ni binder. EDS analysis revealed that the rate at which Ti diffuses into HfC is higher than the rate at which Hf diffuses into TiC. Upper limits to the diffusion coefficients for these processes are determined and show that solid solution carbides will form from HfC + TiC powder mixtures at 2000 ºC in 1 hour if the average powder particle size is less than 5 μm. The diffusion rates decrease with a decrease in hot pressing temperature but mass transport between the phases can be enhanced by addition of a metallic binder. TEM and EDS analysis shows that Ni wets TiC more efficiently than HfC and that the solubility of TiC in Ni is also higher than that of HfC. The grain size of the carbide phases increases with an increase in the rate at which they dissolve into and re-precipitate from the liquid binder. The crystal structure of the binder phase depends on the concentration of Ti and Hf that remain in the binder after cooling and the carbide phase in which the binder is embedded. Analysis of TEM electron diffraction patterns show that the binder phase consists of cubic solid solutions as well as intermetallic and cubic phases in which atomic ordering is observed.
- Full Text:
- Date Issued: 2007