Formulation development and thermorheological properties of crumb rubber/eva modified bitumen
- Authors: Nare, Keith Dumisani
- Date: 2016
- Subjects: Crumb rubber Bitumen , Vinyl acetate
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/11974 , vital:27015
- Description: The study deals with the formulation development and thermorheological properties of crumb rubber/ethylene vinyl acetate (EVA) modified bitumen with the aim of optimizing the amount of crumb rubber and EVA loadings in bitumen based on thermorheological parameters complex shear modulus, phase angle and rutting parameter. In the modified binders EVA offers plastomer properties whereas the crumb rubber confers elasticity to the bitumen. 13.75% crumb rubber and 2.5% EVA loadings based on aging indices gave the best optimized mixture. The thermorheological behaviour of the best optimized mixture was compared to industrial grade EVA (AP-1) and crumb rubber (AR-1) modified bitumen. Improving aging behaviour of the bitumen was evaluated using four antioxidants: carbon black, hydrated lime, Irganox 1010 and Irgafos 168. The least aging indices at 58˚C and 64˚C were obtained from a 1:1:1 Irganox 1010/hydrated lime/carbon black mixture. SARA (saturates, aromatics, resins and asphaltene) analysis gave the chemical background for application of antioxidants to reduce the propensity of short term aging. To further improve the EVA/crumb rubber optimized mixture for workability FT wax (Sasobit®) was assayed at loadings from 0-2.5%. This was done to match the EVA content and maintain the original maximum loading of 2.5% in the optimized mixture. The phase change abilities of FT wax owing to the high latent heat enabled co-crystallization with the EVA with the elastomeric backbone of crumb rubber acting as support material. The energy-sustainability nexus was found to have worked at less than 1% loading of FT wax in the EVA/crumb rubber modified bitumen. Response surface methodology approach to all the sections of work was used to come up with the optimized mixtures based on rheological parameters complex shear modulus, phase angle and rutting parameter at test temperature 64˚C. The interaction chemistry of bitumen, crumb rubber, EVA and FT wax was found to be first and second order in all cases involving individual contributions and co-interaction amongst the factors. Project costing for each section of work (optimizing section, antioxidant section and FT wax section) was conducted involving the raw materials used, equipment used, labour involved and other costs incurred for all the project work.
- Full Text:
- Date Issued: 2016
- Authors: Nare, Keith Dumisani
- Date: 2016
- Subjects: Crumb rubber Bitumen , Vinyl acetate
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/11974 , vital:27015
- Description: The study deals with the formulation development and thermorheological properties of crumb rubber/ethylene vinyl acetate (EVA) modified bitumen with the aim of optimizing the amount of crumb rubber and EVA loadings in bitumen based on thermorheological parameters complex shear modulus, phase angle and rutting parameter. In the modified binders EVA offers plastomer properties whereas the crumb rubber confers elasticity to the bitumen. 13.75% crumb rubber and 2.5% EVA loadings based on aging indices gave the best optimized mixture. The thermorheological behaviour of the best optimized mixture was compared to industrial grade EVA (AP-1) and crumb rubber (AR-1) modified bitumen. Improving aging behaviour of the bitumen was evaluated using four antioxidants: carbon black, hydrated lime, Irganox 1010 and Irgafos 168. The least aging indices at 58˚C and 64˚C were obtained from a 1:1:1 Irganox 1010/hydrated lime/carbon black mixture. SARA (saturates, aromatics, resins and asphaltene) analysis gave the chemical background for application of antioxidants to reduce the propensity of short term aging. To further improve the EVA/crumb rubber optimized mixture for workability FT wax (Sasobit®) was assayed at loadings from 0-2.5%. This was done to match the EVA content and maintain the original maximum loading of 2.5% in the optimized mixture. The phase change abilities of FT wax owing to the high latent heat enabled co-crystallization with the EVA with the elastomeric backbone of crumb rubber acting as support material. The energy-sustainability nexus was found to have worked at less than 1% loading of FT wax in the EVA/crumb rubber modified bitumen. Response surface methodology approach to all the sections of work was used to come up with the optimized mixtures based on rheological parameters complex shear modulus, phase angle and rutting parameter at test temperature 64˚C. The interaction chemistry of bitumen, crumb rubber, EVA and FT wax was found to be first and second order in all cases involving individual contributions and co-interaction amongst the factors. Project costing for each section of work (optimizing section, antioxidant section and FT wax section) was conducted involving the raw materials used, equipment used, labour involved and other costs incurred for all the project work.
- Full Text:
- Date Issued: 2016
Site Fidelity of southern right (Eubalaena australis) and humpback whales (Megaptera novaeangliae) in Algoa Bay, South Africa
- Authors: Drost, Eduard F
- Date: 2016
- Subjects: Marine mammals -- South Africa -- Algoa Bay Southern right whale -- South Africa -- Algoa Bay Humpback whale -- South Africa -- Algoa Bay
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/21735 , vital:29742
- Description: Mysticetes, or baleen whales, make up one of two sub-orders of the Order Cetacea within the Class Mammalia (Drikamer et al, 2013). It contains three families, each characterized by baleen plates (Drikamer et al, 2013). These baleen plates consist of keratin that replaced the tooth structures for feeding in these mammals (Drikamer et al, 2013). Other biological characteristics of these animals include paired external nares (blowholes), a sternum consisting of a single bone, symmetrical skull and the most conspicuous of all, the body length of between ten to thirty metres (Drikamer et al, 2013). It is thought that the size characteristic was probably the main factor when categorising them as cetaceans, with the Latin word ‘Cetus’ referring to ‘sea monster’ (Carnaby, 2006). In this literature review, the focus will fall on two species of mysticetes from separate families, namely that of the southern right whale, Eubalaena australis of the Balaenidae family, and the humpback whale, Megaptera novaeangliae of the Balaenopteridae family. Emphasis in this review will fall on the aspect of site fidelity of the mother-calf pairs.
- Full Text:
- Date Issued: 2016
- Authors: Drost, Eduard F
- Date: 2016
- Subjects: Marine mammals -- South Africa -- Algoa Bay Southern right whale -- South Africa -- Algoa Bay Humpback whale -- South Africa -- Algoa Bay
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/21735 , vital:29742
- Description: Mysticetes, or baleen whales, make up one of two sub-orders of the Order Cetacea within the Class Mammalia (Drikamer et al, 2013). It contains three families, each characterized by baleen plates (Drikamer et al, 2013). These baleen plates consist of keratin that replaced the tooth structures for feeding in these mammals (Drikamer et al, 2013). Other biological characteristics of these animals include paired external nares (blowholes), a sternum consisting of a single bone, symmetrical skull and the most conspicuous of all, the body length of between ten to thirty metres (Drikamer et al, 2013). It is thought that the size characteristic was probably the main factor when categorising them as cetaceans, with the Latin word ‘Cetus’ referring to ‘sea monster’ (Carnaby, 2006). In this literature review, the focus will fall on two species of mysticetes from separate families, namely that of the southern right whale, Eubalaena australis of the Balaenidae family, and the humpback whale, Megaptera novaeangliae of the Balaenopteridae family. Emphasis in this review will fall on the aspect of site fidelity of the mother-calf pairs.
- Full Text:
- Date Issued: 2016
A framework for grain commodity trading decision support in South Africa
- Authors: Ayankoya, Kayode Anthony
- Date: 2016
- Subjects: Grain trade -- South Africa Commodity exchanges -- South Africa Food industry and trade -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/11437 , vital:26925
- Description: In several countries around the world, grain commodities are traded as assets on stock exchanges. This indicate that the market and effectively the prices of the grain commodities in such countries, are controlled by several local and international economic, political and social factors that are rapidly changing. As a result, the prices of some grain commodities are volatile and trading in such commodities are prone to price-related risks. There are different trading strategies for minimising price-related risks and maximising profits. But empirical research suggests that making the right decision for effective grain commodities trading has been a difficult task for stakeholders due to high volatility of grain commodities prices. Studies have shown that this is more challenging among grain commodities farmers because of their lack of skills and the time to sift through and make sense of the datasets on the plethora of factors that influence the grain commodities market. This thesis focused on providing an answer for the main research problem that grain farmers in South Africa do not take full advantage of all the available strategies for trading their grain commodities because of the complexities associated with monitoring the large datasets that influence the grain commodities market. The main objective set by this study is to design a framework that can be followed to collect, integrate and analyse datasets that influence trading decisions of grain farmers in South Africa about grain commodities. This study takes advantage of the developments in Big Data and Data Science to achieve the set objective using the Design Science Research (DSR) methodology. The prediction of future prices of grain commodities for the different trading strategies was identified as an important factor for making better decisions when trading grain commodities and the key factors that influence the prices were identified. This was followed by a critical review of the literature to determine how the concepts of Big Data and Data Science can be leveraged for an effective grain commodities trading decision support. This resulted in a proposed framework for grain commodities trading. The proposed framework suggested an investigation of the factors that influence the prices of grain commodities as the basis for acquiring the relevant datasets. The proposed framework suggested the adoption of the Big Data approach in acquiring, preparing and integrating relevant datasets from several sources. Furthermore, it was suggested that algorithmic models for predicting grain commodities prices can be developed on top of the data layer of the proposed framework to provide real-time decision support. The proposed framework suggests the need for a carefully designed visualisation of the result and the collected data that promotes user experience. Lastly, the proposed framework included a technology consideration component to support the Big Data and Data Science approach of the framework. To demonstrate that the proposed framework addressed the main problem of this research, datasets from several sources on trading white maize in South Africa and the factors that influence market were streamed, integrated and analysed. Backpropagation Neural Network algorithm was used for modelling the prices of white maize for spot and futures trading strategies were predicted. There are other modelling techniques such as the Box-Jenkins statistical time series analysis methodology. But, Neural Networks was identified as more suitable for time series data with complex patterns and relationships. A demonstration system was setup to provide effective decision support by using near real-time data to provide a dynamic predictive analytics for the spot and December futures contract prices of white maize in South Africa. Comparative analysis of predictions made using the model from the proposed framework to actual data indicated a significant degree of accuracy. A further evaluation was carried out by asking experienced traders to make predictions for the spot and December futures contract prices of white maize. The result of the exercise indicated that the predictions from the developed model were much closer to the actual prices. This indicated that the proposed framework is technically capable and generally useful. It also shows that the proposed framework can be used to provide decision support about trading grain commodities to stakeholders with lesser skills, experience and resources. The practical contribution of this thesis is that relevant datasets from several sources can be streamed into an integrated data source in real-time, which can be used as input for a real-time learning algorithmic model for predicting grain commodities prices. This will make it possible for a predictive analytics that responds to market volatility thereby providing an effective decision support for grain commodities trading. Another practical contribution of this thesis is a proposed framework that can be followed for developing a Decision Support System for trading in grain commodities. This thesis made theoretical contributions by building on the information processing theory and the decision making theory. The theoretical contribution of this thesis consists of the identification of Big Data approach, tools and techniques for eradicating uncertainty and equivocality in grain commodities trading decision making process.
- Full Text:
- Date Issued: 2016
- Authors: Ayankoya, Kayode Anthony
- Date: 2016
- Subjects: Grain trade -- South Africa Commodity exchanges -- South Africa Food industry and trade -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/11437 , vital:26925
- Description: In several countries around the world, grain commodities are traded as assets on stock exchanges. This indicate that the market and effectively the prices of the grain commodities in such countries, are controlled by several local and international economic, political and social factors that are rapidly changing. As a result, the prices of some grain commodities are volatile and trading in such commodities are prone to price-related risks. There are different trading strategies for minimising price-related risks and maximising profits. But empirical research suggests that making the right decision for effective grain commodities trading has been a difficult task for stakeholders due to high volatility of grain commodities prices. Studies have shown that this is more challenging among grain commodities farmers because of their lack of skills and the time to sift through and make sense of the datasets on the plethora of factors that influence the grain commodities market. This thesis focused on providing an answer for the main research problem that grain farmers in South Africa do not take full advantage of all the available strategies for trading their grain commodities because of the complexities associated with monitoring the large datasets that influence the grain commodities market. The main objective set by this study is to design a framework that can be followed to collect, integrate and analyse datasets that influence trading decisions of grain farmers in South Africa about grain commodities. This study takes advantage of the developments in Big Data and Data Science to achieve the set objective using the Design Science Research (DSR) methodology. The prediction of future prices of grain commodities for the different trading strategies was identified as an important factor for making better decisions when trading grain commodities and the key factors that influence the prices were identified. This was followed by a critical review of the literature to determine how the concepts of Big Data and Data Science can be leveraged for an effective grain commodities trading decision support. This resulted in a proposed framework for grain commodities trading. The proposed framework suggested an investigation of the factors that influence the prices of grain commodities as the basis for acquiring the relevant datasets. The proposed framework suggested the adoption of the Big Data approach in acquiring, preparing and integrating relevant datasets from several sources. Furthermore, it was suggested that algorithmic models for predicting grain commodities prices can be developed on top of the data layer of the proposed framework to provide real-time decision support. The proposed framework suggests the need for a carefully designed visualisation of the result and the collected data that promotes user experience. Lastly, the proposed framework included a technology consideration component to support the Big Data and Data Science approach of the framework. To demonstrate that the proposed framework addressed the main problem of this research, datasets from several sources on trading white maize in South Africa and the factors that influence market were streamed, integrated and analysed. Backpropagation Neural Network algorithm was used for modelling the prices of white maize for spot and futures trading strategies were predicted. There are other modelling techniques such as the Box-Jenkins statistical time series analysis methodology. But, Neural Networks was identified as more suitable for time series data with complex patterns and relationships. A demonstration system was setup to provide effective decision support by using near real-time data to provide a dynamic predictive analytics for the spot and December futures contract prices of white maize in South Africa. Comparative analysis of predictions made using the model from the proposed framework to actual data indicated a significant degree of accuracy. A further evaluation was carried out by asking experienced traders to make predictions for the spot and December futures contract prices of white maize. The result of the exercise indicated that the predictions from the developed model were much closer to the actual prices. This indicated that the proposed framework is technically capable and generally useful. It also shows that the proposed framework can be used to provide decision support about trading grain commodities to stakeholders with lesser skills, experience and resources. The practical contribution of this thesis is that relevant datasets from several sources can be streamed into an integrated data source in real-time, which can be used as input for a real-time learning algorithmic model for predicting grain commodities prices. This will make it possible for a predictive analytics that responds to market volatility thereby providing an effective decision support for grain commodities trading. Another practical contribution of this thesis is a proposed framework that can be followed for developing a Decision Support System for trading in grain commodities. This thesis made theoretical contributions by building on the information processing theory and the decision making theory. The theoretical contribution of this thesis consists of the identification of Big Data approach, tools and techniques for eradicating uncertainty and equivocality in grain commodities trading decision making process.
- Full Text:
- Date Issued: 2016
A study of lanthanide complexes with di-2-pyridyl ligands
- Authors: Coetzee, Louis-Charl Cloete
- Date: 2016
- Subjects: Rare earth metals
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/4731 , vital:20659
- Description: The ligands di(2-pyridyl) ketone (DPK) and cis-1,2 di(2-pyridyl) ethylene (DPE) are N,N,Odonor ligands that can undergo nucleophilic addition and become more flexible for coordination. The reaction between the lanthanide thiocyanate salt and DPK gave rise to seven novel complexes of the general formula [Ln(NCS)3(DPKOH)3], where Ln = La, Ce, Nd, Eu, Tb, Dy and Ho. 1H NMR spectroscopy verified that the ligand underwent nucleophilic addition upon coordination. This was further confirmed using UV-Vis spectroscopy which showed a shift in the absorption bands due to conjugation of electrons within the pyridyl ring upon coordination. UV-Vis spectroscopy was also utilised to test the covalent character of the neodymium and holmium complexes. X-ray diffraction and IR spectroscopy showed that three DPK ligands coordinated bidentately through a pyridinic nitrogen and a hydroxyl oxygen, while three isothiocyanato molecules completed the coordination environment around each metal. Furthermore, X-ray diffraction also revealed that these complexes are isostructural, ninecoordinate and the polyhedron which encloses each ion is of trigonal tricapped prismatic shape with D3h symmetry. Micro-analysis on all the complexes, except lanthanum and holmium confirmed the molecular formulae produced from the crystallographic data of each complex. The reaction between the lanthanide thiocyanate salt and DPE produced poor quality crystals which could not be detected by X-ray diffraction. The lanthanide salts used for this reaction were lanthanum, neodymium, europium, dysprosium and holmium. Upon coordination, conductivity measurements detected the presence of lanthanide ions in each solution. 1H NMR and IR spectroscopic studies showed that the ethylenic moiety of DPE underwent nucleophilic addition upon coordination. UV-Vis spectroscopy further confirmed nucleophilic addition upon coordination due to shifts in absorption bands. IR spectroscopy verified the possibility of a bidentate coordination to each metal through a pyridinic nitrogen and a hydroxyl oxygen as well as a monodentate coordination through isothiocyanato ligands. A micro-analysis on all the complexes provided the molecular formulae that can best fit each complex. The effect of the solvent molecules on the bonding parameters of the lanthanum complex was investigated. An analysis of the results produced from crystallographic data revealed the presence of intermolecular forces which interacted and stabilised the complex.
- Full Text:
- Date Issued: 2016
- Authors: Coetzee, Louis-Charl Cloete
- Date: 2016
- Subjects: Rare earth metals
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/4731 , vital:20659
- Description: The ligands di(2-pyridyl) ketone (DPK) and cis-1,2 di(2-pyridyl) ethylene (DPE) are N,N,Odonor ligands that can undergo nucleophilic addition and become more flexible for coordination. The reaction between the lanthanide thiocyanate salt and DPK gave rise to seven novel complexes of the general formula [Ln(NCS)3(DPKOH)3], where Ln = La, Ce, Nd, Eu, Tb, Dy and Ho. 1H NMR spectroscopy verified that the ligand underwent nucleophilic addition upon coordination. This was further confirmed using UV-Vis spectroscopy which showed a shift in the absorption bands due to conjugation of electrons within the pyridyl ring upon coordination. UV-Vis spectroscopy was also utilised to test the covalent character of the neodymium and holmium complexes. X-ray diffraction and IR spectroscopy showed that three DPK ligands coordinated bidentately through a pyridinic nitrogen and a hydroxyl oxygen, while three isothiocyanato molecules completed the coordination environment around each metal. Furthermore, X-ray diffraction also revealed that these complexes are isostructural, ninecoordinate and the polyhedron which encloses each ion is of trigonal tricapped prismatic shape with D3h symmetry. Micro-analysis on all the complexes, except lanthanum and holmium confirmed the molecular formulae produced from the crystallographic data of each complex. The reaction between the lanthanide thiocyanate salt and DPE produced poor quality crystals which could not be detected by X-ray diffraction. The lanthanide salts used for this reaction were lanthanum, neodymium, europium, dysprosium and holmium. Upon coordination, conductivity measurements detected the presence of lanthanide ions in each solution. 1H NMR and IR spectroscopic studies showed that the ethylenic moiety of DPE underwent nucleophilic addition upon coordination. UV-Vis spectroscopy further confirmed nucleophilic addition upon coordination due to shifts in absorption bands. IR spectroscopy verified the possibility of a bidentate coordination to each metal through a pyridinic nitrogen and a hydroxyl oxygen as well as a monodentate coordination through isothiocyanato ligands. A micro-analysis on all the complexes provided the molecular formulae that can best fit each complex. The effect of the solvent molecules on the bonding parameters of the lanthanum complex was investigated. An analysis of the results produced from crystallographic data revealed the presence of intermolecular forces which interacted and stabilised the complex.
- Full Text:
- Date Issued: 2016
The development of rhenium nanoradiopharmaceuticals
- Authors: Ntsimango, Songeziwe
- Date: 2016
- Subjects: Rhenium -- South Africa Radiopharmaceuticals -- South Africa , Nanoparticles -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/13017 , vital:27144
- Description: The dissertation details the experimental work on the attempt to develop rhenium(V)phthalocyanine complexes directly from its +7 oxidation state (perrhenate). Different reducing agents (PPh3, Na2S2O5 and NaBH4) were employed and consequently, different results were acquired, such as rhenium(V)-mediated oxidative hydrolysis of the phthalocyanines (Pcs), the formation of a rhenium-phthalocyanine complex and phthalocyanine-capped nanoparticles. The rhenium nanoparticles that were formed were optimized from a synthesis point of view and, cancer localizing ability of the rhenium nanoparticles was investigated. The complexes were synthesized through direct metalation of pre-formed metal-free phthalocyanines using the “cold isotopes” of the rhenium metal. Rhenium nanoparticles (Re NPs) were synthesized in aqueous saline medium so as to imitate the environment on which Re is produced from its reactor. The nanoparticles (NPs) were capped with phthalocyanines which were covalently biofunctionalized with a folic acid moiety to enhance the targeting ability of the Re NPs. These NP systems were characterised with techniques such as ultraviolet-visible UV-Vis spectroscopy and transmission electron microscopy TEM. Cytotoxicity of the NPs was tested against four different cell lines and subsequently their cytotoxicity profiles were elucidated, and the profiles shown a dose-dependent responsealthough the results in some cell lines were unclear. Their fluorescence properties were also studied to provide photophysical information for investigation of their tumor localization using human cancer cells lines via confocal fluorescence microscopy studies. Particle size effect on localization of NPs was also investigated using confocal fluorescence and TEM. Two sizes were chosen (10 and 50 nm), and the smaller NPs (10 nm) were found to exhibit stronger fluorescence properties than the 50 nm NPs, and they were also found to have a better localization ability than the 50 nm NPs. Finally, their tumor and organ biodistribution studies will be carried out using micro-SPECT kits and model mice (using the “hot” isotopes in a radiopharmacy laboratory).
- Full Text:
- Date Issued: 2016
- Authors: Ntsimango, Songeziwe
- Date: 2016
- Subjects: Rhenium -- South Africa Radiopharmaceuticals -- South Africa , Nanoparticles -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/13017 , vital:27144
- Description: The dissertation details the experimental work on the attempt to develop rhenium(V)phthalocyanine complexes directly from its +7 oxidation state (perrhenate). Different reducing agents (PPh3, Na2S2O5 and NaBH4) were employed and consequently, different results were acquired, such as rhenium(V)-mediated oxidative hydrolysis of the phthalocyanines (Pcs), the formation of a rhenium-phthalocyanine complex and phthalocyanine-capped nanoparticles. The rhenium nanoparticles that were formed were optimized from a synthesis point of view and, cancer localizing ability of the rhenium nanoparticles was investigated. The complexes were synthesized through direct metalation of pre-formed metal-free phthalocyanines using the “cold isotopes” of the rhenium metal. Rhenium nanoparticles (Re NPs) were synthesized in aqueous saline medium so as to imitate the environment on which Re is produced from its reactor. The nanoparticles (NPs) were capped with phthalocyanines which were covalently biofunctionalized with a folic acid moiety to enhance the targeting ability of the Re NPs. These NP systems were characterised with techniques such as ultraviolet-visible UV-Vis spectroscopy and transmission electron microscopy TEM. Cytotoxicity of the NPs was tested against four different cell lines and subsequently their cytotoxicity profiles were elucidated, and the profiles shown a dose-dependent responsealthough the results in some cell lines were unclear. Their fluorescence properties were also studied to provide photophysical information for investigation of their tumor localization using human cancer cells lines via confocal fluorescence microscopy studies. Particle size effect on localization of NPs was also investigated using confocal fluorescence and TEM. Two sizes were chosen (10 and 50 nm), and the smaller NPs (10 nm) were found to exhibit stronger fluorescence properties than the 50 nm NPs, and they were also found to have a better localization ability than the 50 nm NPs. Finally, their tumor and organ biodistribution studies will be carried out using micro-SPECT kits and model mice (using the “hot” isotopes in a radiopharmacy laboratory).
- Full Text:
- Date Issued: 2016
Designing a proxemic natural user interface to support information sharing among co-located mobile devices
- Authors: Lee Son, Timothy
- Date: 2016
- Subjects: User interfaces (Computer systems) Mobile computing
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: http://hdl.handle.net/10948/12845 , vital:27126
- Description: Existing information sharing methods used by mobile devices require the user to repeat a series of steps to share one or more selected files with another individual, where the entire process is repeated for sharing the same file(s) with multiple individuals. Due to constant advancements in mobile computing, mobile devices are able to provide new, more intuitive, and easier solutions to sharing information. Natural User Interfaces (NUIs) primarily focus on the reuse of existing knowledge (from other applications or activities) or human abilities (such as touch, speech, and gestures) to provide a more accurate and usable solution to existing human computer interaction (HCI) systems. The interaction techniques of NUIs have transformed these human abilities. The main research objective was to design a proxemic NUI to provide an accurate and usable solution to support information sharing among co-located mobile devices. The development of MotionShare supported multiple devices to share information simultaneously using NUI interaction techniques. An initial calibration setup allowed MotionShare to calculate the approximate positions and orientations of every device in the environment. Novel NUI interaction techniques were implemented because of the known positions of these devices. MotionShare was evaluated using two evaluation techniques, namely analytical and experimental. The results showed device positioning to have a mean precision, trueness, and recall of 72.21%, 91.39%, and 71.63% respectively. The results showed MotionShare gestures to have a recall of 90.50% and 100.00% for the point gesture and the touch gesture respectively. The experimental technique consisted of a pilot study (formative evaluation) and a usability evaluation (summative evaluation). The results of the usability evaluation showed high user satisfaction and statistical analysis, which revealed MotionShare to achieve the main research objective. These results also showed that participants preferred the touch gesture to the point gesture, but expressed both gestures can be utilised for the tasks of MotionShare.
- Full Text:
- Date Issued: 2016
- Authors: Lee Son, Timothy
- Date: 2016
- Subjects: User interfaces (Computer systems) Mobile computing
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: http://hdl.handle.net/10948/12845 , vital:27126
- Description: Existing information sharing methods used by mobile devices require the user to repeat a series of steps to share one or more selected files with another individual, where the entire process is repeated for sharing the same file(s) with multiple individuals. Due to constant advancements in mobile computing, mobile devices are able to provide new, more intuitive, and easier solutions to sharing information. Natural User Interfaces (NUIs) primarily focus on the reuse of existing knowledge (from other applications or activities) or human abilities (such as touch, speech, and gestures) to provide a more accurate and usable solution to existing human computer interaction (HCI) systems. The interaction techniques of NUIs have transformed these human abilities. The main research objective was to design a proxemic NUI to provide an accurate and usable solution to support information sharing among co-located mobile devices. The development of MotionShare supported multiple devices to share information simultaneously using NUI interaction techniques. An initial calibration setup allowed MotionShare to calculate the approximate positions and orientations of every device in the environment. Novel NUI interaction techniques were implemented because of the known positions of these devices. MotionShare was evaluated using two evaluation techniques, namely analytical and experimental. The results showed device positioning to have a mean precision, trueness, and recall of 72.21%, 91.39%, and 71.63% respectively. The results showed MotionShare gestures to have a recall of 90.50% and 100.00% for the point gesture and the touch gesture respectively. The experimental technique consisted of a pilot study (formative evaluation) and a usability evaluation (summative evaluation). The results of the usability evaluation showed high user satisfaction and statistical analysis, which revealed MotionShare to achieve the main research objective. These results also showed that participants preferred the touch gesture to the point gesture, but expressed both gestures can be utilised for the tasks of MotionShare.
- Full Text:
- Date Issued: 2016
Perceptions and practices of small-scale piggery farmers towards animal welfare in the Nelson Mandela Bay Metropole
- Authors: Maqhajana, Mzwanele
- Date: 2016
- Subjects: Animal welfare -- South Africa -- Nelson Mandela Bay Municipality , Farms, Small -- South Africa -- Nelson Mandela Bay Municipality
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/8079 , vital:24719
- Description: There has been an increasing concern about animal welfare in small-scale farming as the farmers' agricultural practices shift towards intensive agriculture. It has become important to comprehend how small-scale farmers perceive and practice animal welfare relative to production and market integration. To solve the research problem, the research emphasis was on assessing the following practices; procedures adopted by the small-scale farmers, welfare levels verses industry equirements for market integration; determinants affecting small-scale perceptions and attitudes towards animal welfare and how has animal welfare affected farm development and production. The research focus for this study was to investigate the linkage between perceptions and this process. In order to achieve a more in-depth understanding of the study while also ensuring its validity and correctness a triangulation research method was applied, which consisted of a quantitative and qualitative method approach. The focus groups and structured research interview questions were used as the main data collections instruments. The study consisted of sixty-two piggery small-scale farmers from three areas of the Nelson Mandela Bay metropole. The study found that there was a disparity between the perceptions and practice of small-scale farmers. Farmers perceived their practices as acceptable. However, on most of the farms the pigs were farmed in an unhygienic environment, had limited handling facilities, the farmers had unconventional methods to handle the pigs; there was poor support from technical services, many of the farmers never administered animal welfare evaluations and applied questionable feeding practices. The study also indicated that less than 15% had suitable facilities to accommodate suitable reproduction and piglet care. The researcher recommended the following interventions to improve animal welfare approaches with small-scale farmers in the Nelson Mandela Bay metropole: Training and information campaigns to improve small-scale piggery farmers' perception and knowledge of animal welfare, as well as market standards and requirements. Strengthening the relationship between the small-scale piggery farmers and animal welfare stakeholders. Including active engagement between small scale piggery farmers and the Department of Rural Development, Agrarian Reform and Urban Agriculture Unit of the Nelson Mandela Bay Municipality. Encouraging farmers to strive for stronger markets to facilitate better income and care of animals.
- Full Text:
- Date Issued: 2016
- Authors: Maqhajana, Mzwanele
- Date: 2016
- Subjects: Animal welfare -- South Africa -- Nelson Mandela Bay Municipality , Farms, Small -- South Africa -- Nelson Mandela Bay Municipality
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/8079 , vital:24719
- Description: There has been an increasing concern about animal welfare in small-scale farming as the farmers' agricultural practices shift towards intensive agriculture. It has become important to comprehend how small-scale farmers perceive and practice animal welfare relative to production and market integration. To solve the research problem, the research emphasis was on assessing the following practices; procedures adopted by the small-scale farmers, welfare levels verses industry equirements for market integration; determinants affecting small-scale perceptions and attitudes towards animal welfare and how has animal welfare affected farm development and production. The research focus for this study was to investigate the linkage between perceptions and this process. In order to achieve a more in-depth understanding of the study while also ensuring its validity and correctness a triangulation research method was applied, which consisted of a quantitative and qualitative method approach. The focus groups and structured research interview questions were used as the main data collections instruments. The study consisted of sixty-two piggery small-scale farmers from three areas of the Nelson Mandela Bay metropole. The study found that there was a disparity between the perceptions and practice of small-scale farmers. Farmers perceived their practices as acceptable. However, on most of the farms the pigs were farmed in an unhygienic environment, had limited handling facilities, the farmers had unconventional methods to handle the pigs; there was poor support from technical services, many of the farmers never administered animal welfare evaluations and applied questionable feeding practices. The study also indicated that less than 15% had suitable facilities to accommodate suitable reproduction and piglet care. The researcher recommended the following interventions to improve animal welfare approaches with small-scale farmers in the Nelson Mandela Bay metropole: Training and information campaigns to improve small-scale piggery farmers' perception and knowledge of animal welfare, as well as market standards and requirements. Strengthening the relationship between the small-scale piggery farmers and animal welfare stakeholders. Including active engagement between small scale piggery farmers and the Department of Rural Development, Agrarian Reform and Urban Agriculture Unit of the Nelson Mandela Bay Municipality. Encouraging farmers to strive for stronger markets to facilitate better income and care of animals.
- Full Text:
- Date Issued: 2016
The application of GIS and remote sensing to assess the effect of periodic flooding on communities along the Juskeiriver: A case study of Alexandria Township, Johannesburg, South Africa
- Authors: Mawasha, Tshepo Sylvester
- Date: 2016
- Subjects: Remote sensing Geographic information systems -- South Africa , Remote sensing
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/45613 , vital:38918
- Description: Floods are water induced disasters that led to temporary induction of dry and cause serious damages in the affected location such as loss of valuable assets, lives and destruction of infrastructure. Flooding had become common in Alexandra Township during rainfall season and the recorded impact of periodic flooding on communities is increasing at an alarming rate. This study seeks to identify populations vulnerable to flooding and to map-out areas at high risk of flood disasters, using GIS and RS as a tool. For GIS application different types of maps were produced, namely, flood vulnerability, hazards, risk and risk index map highlighting areas at risk of being affected by flooding. Flood risk index maps identify three categories of risk zones; low and high risk zone. The household units within each of the risk zones was calculated and the total was estimated to be 762 for low-risk and 32 486 for high risk zone. The SRTM Digital Elevation Model (DEM) and multi-temporal Satellite Probatoire d’Observation de la Terra (SPOT) satellite images for 1997, 2006 and 2013 of the area was used for land-use and land-cover (LULC) change analyses using maximum-likelihood post-classification comparison. Results reveal that tremendous urban development had taken place in the study area along the Jukskei River area for the past sixteen years. It was observed that there was a sharp decrease in vegetation from 237ha (1997) to 134ha (2006) to 68ha (2013). This may had a negative impact on the environment around this area by decreasing surface runoff. The trend however, shows that bare surface and vegetation land-cover class has no potential to recover. Questionnaires aimed at all the residents in the study area were used to assess the effect of periodic flooding on communities. Community leader and City of Johannesburg Disaster Management Unit (CoJDMU) interviews were also conducted to get more insight about floods management in the study area. Finally, strategies for alleviating flood risk in the study area were discussed and some recommendations were made to help the government and municipal authorities to improve and development sustainable flood mitigation measures.
- Full Text:
- Date Issued: 2016
- Authors: Mawasha, Tshepo Sylvester
- Date: 2016
- Subjects: Remote sensing Geographic information systems -- South Africa , Remote sensing
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/45613 , vital:38918
- Description: Floods are water induced disasters that led to temporary induction of dry and cause serious damages in the affected location such as loss of valuable assets, lives and destruction of infrastructure. Flooding had become common in Alexandra Township during rainfall season and the recorded impact of periodic flooding on communities is increasing at an alarming rate. This study seeks to identify populations vulnerable to flooding and to map-out areas at high risk of flood disasters, using GIS and RS as a tool. For GIS application different types of maps were produced, namely, flood vulnerability, hazards, risk and risk index map highlighting areas at risk of being affected by flooding. Flood risk index maps identify three categories of risk zones; low and high risk zone. The household units within each of the risk zones was calculated and the total was estimated to be 762 for low-risk and 32 486 for high risk zone. The SRTM Digital Elevation Model (DEM) and multi-temporal Satellite Probatoire d’Observation de la Terra (SPOT) satellite images for 1997, 2006 and 2013 of the area was used for land-use and land-cover (LULC) change analyses using maximum-likelihood post-classification comparison. Results reveal that tremendous urban development had taken place in the study area along the Jukskei River area for the past sixteen years. It was observed that there was a sharp decrease in vegetation from 237ha (1997) to 134ha (2006) to 68ha (2013). This may had a negative impact on the environment around this area by decreasing surface runoff. The trend however, shows that bare surface and vegetation land-cover class has no potential to recover. Questionnaires aimed at all the residents in the study area were used to assess the effect of periodic flooding on communities. Community leader and City of Johannesburg Disaster Management Unit (CoJDMU) interviews were also conducted to get more insight about floods management in the study area. Finally, strategies for alleviating flood risk in the study area were discussed and some recommendations were made to help the government and municipal authorities to improve and development sustainable flood mitigation measures.
- Full Text:
- Date Issued: 2016
Development of a small production platform for citronellal processing
- Mafu, Lubabalo Rowan, Zeelie, Ben
- Authors: Mafu, Lubabalo Rowan , Zeelie, Ben
- Date: 2016
- Subjects: Organic compounds -- Synthesis , Plasticizers
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/8488 , vital:26370
- Description: The aim of the project was to develop a small production platform for citronellal processing. The objective of the study was to develop a single continuous flow reactor system for the synthesis of novel derivatives of citronellal and isopulegol. The first step was to develop a continuous flow reactor system for the isopulegol synthesis. The stainless steel tubular fixed-bed reactor equipped with a reaction column (I.D: 9.53 mm and length: 120 mm) was used for the study. The reactor column was packed with H-ZMS-5 zeolite extrusion catalyst. The solvent-free cyclisation reaction of citronellal was investigated and at optimum conditions, 100% of citronellal conversion and almost 100% selectivity towards isopulegol was achieved. A good catalytic performance was observed from the H-ZSM-5 catalyst and proved to be stable for a prolonged reaction time. The second reaction step was to develop a continuous flow reactor system for the synthesis of isopulegyl-ether derivatives. A UniQsis FlowSyn reactor system equipped with a stainless steel reactor column was used for the study. The reactor column was packed with amberlyst-15 dry catalyst. Wherein, n-propanol was employed as a model etherifying agent and as a reaction solvent. At optimum reaction condition, only 30% selectivity of isopulegyl propoxy-ether was achieved. The reaction was found to depend highly on temperature and residence time. The increase of these parameters was found to increase the side reactions and reduced the selectivity of the desired product. Other heterogeneous catalysts such as H-beta zeolite, aluminium pillared clay, Aluminium oxide and H-ZSM-5 were also evaluated in the reaction. Among these catalysts, a catalytic activity was observed with H-beta zeolite (19%) and aluminium pillared clay (5%). Based on these results, none of the evaluated catalysts provided the desired selectivity (greater than 70%) towards the isopulegyl propoxy-ether, therefore the process was not investigated further. In light of this, the isopulegol etherification synthetic route was terminated. Consequently, another analogue of citronellal was used as an alternative intermediate in place of isopulegol, namely para-menthane-3,8-diol (PMD). The initial studies for the synthesis of the novel PMD di-esters from isopulegol were performed in the batch-scale reactor. In a solvent-free reaction, acetic anhydride was initially used as a model acetylating agent. The reaction was performed using polymer-bound scandium triflate (PS-Sc(OTf)3) catalyst. The effect of reaction parameters such as temperature, molar ratio, and reaction time were studied towards the PMD conversion and di-esters selectivity. At optimum reaction conditions, PMD conversion of 70% and di-acetate selectivity of 67% were observed. The reaction was found to follow the zeroth-order kinetics with respect to PMD conversion and obeyed the Arrhenius equation. Other types of di-ester derivatives were synthesized from PMD by varying the carbon chain length of the acetylating agent. The prepared compounds were separated from the product mixtures by vacuum distillation, purified on a column chromatography and characterised by FT-IR, GC-MS, and 1H-NMR, 13C-NMR. The developed methodology was optimised in flow by using an ArrheniumOne microwave-assisted continuous-flow fixed-bed reactor system. A detailed experimental design was used to carry-out the reactions. The reaction parameters such as temperature and flow-rate were studied towards the PMD conversion and di-ester selectivity. From the experimental design analysis, the di-ester selectivity was found to depend highly on the residence time (flow-rate) and significantly on temperature. The PMD conversion and di-ester selectivity were found to increase with decrease in the flow-rate. The conversion and selectivity achieved in the continuous flow process were significantly higher than the achieved in the batch-scale process with respect to the residence time.
- Full Text:
- Date Issued: 2016
- Authors: Mafu, Lubabalo Rowan , Zeelie, Ben
- Date: 2016
- Subjects: Organic compounds -- Synthesis , Plasticizers
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/8488 , vital:26370
- Description: The aim of the project was to develop a small production platform for citronellal processing. The objective of the study was to develop a single continuous flow reactor system for the synthesis of novel derivatives of citronellal and isopulegol. The first step was to develop a continuous flow reactor system for the isopulegol synthesis. The stainless steel tubular fixed-bed reactor equipped with a reaction column (I.D: 9.53 mm and length: 120 mm) was used for the study. The reactor column was packed with H-ZMS-5 zeolite extrusion catalyst. The solvent-free cyclisation reaction of citronellal was investigated and at optimum conditions, 100% of citronellal conversion and almost 100% selectivity towards isopulegol was achieved. A good catalytic performance was observed from the H-ZSM-5 catalyst and proved to be stable for a prolonged reaction time. The second reaction step was to develop a continuous flow reactor system for the synthesis of isopulegyl-ether derivatives. A UniQsis FlowSyn reactor system equipped with a stainless steel reactor column was used for the study. The reactor column was packed with amberlyst-15 dry catalyst. Wherein, n-propanol was employed as a model etherifying agent and as a reaction solvent. At optimum reaction condition, only 30% selectivity of isopulegyl propoxy-ether was achieved. The reaction was found to depend highly on temperature and residence time. The increase of these parameters was found to increase the side reactions and reduced the selectivity of the desired product. Other heterogeneous catalysts such as H-beta zeolite, aluminium pillared clay, Aluminium oxide and H-ZSM-5 were also evaluated in the reaction. Among these catalysts, a catalytic activity was observed with H-beta zeolite (19%) and aluminium pillared clay (5%). Based on these results, none of the evaluated catalysts provided the desired selectivity (greater than 70%) towards the isopulegyl propoxy-ether, therefore the process was not investigated further. In light of this, the isopulegol etherification synthetic route was terminated. Consequently, another analogue of citronellal was used as an alternative intermediate in place of isopulegol, namely para-menthane-3,8-diol (PMD). The initial studies for the synthesis of the novel PMD di-esters from isopulegol were performed in the batch-scale reactor. In a solvent-free reaction, acetic anhydride was initially used as a model acetylating agent. The reaction was performed using polymer-bound scandium triflate (PS-Sc(OTf)3) catalyst. The effect of reaction parameters such as temperature, molar ratio, and reaction time were studied towards the PMD conversion and di-esters selectivity. At optimum reaction conditions, PMD conversion of 70% and di-acetate selectivity of 67% were observed. The reaction was found to follow the zeroth-order kinetics with respect to PMD conversion and obeyed the Arrhenius equation. Other types of di-ester derivatives were synthesized from PMD by varying the carbon chain length of the acetylating agent. The prepared compounds were separated from the product mixtures by vacuum distillation, purified on a column chromatography and characterised by FT-IR, GC-MS, and 1H-NMR, 13C-NMR. The developed methodology was optimised in flow by using an ArrheniumOne microwave-assisted continuous-flow fixed-bed reactor system. A detailed experimental design was used to carry-out the reactions. The reaction parameters such as temperature and flow-rate were studied towards the PMD conversion and di-ester selectivity. From the experimental design analysis, the di-ester selectivity was found to depend highly on the residence time (flow-rate) and significantly on temperature. The PMD conversion and di-ester selectivity were found to increase with decrease in the flow-rate. The conversion and selectivity achieved in the continuous flow process were significantly higher than the achieved in the batch-scale process with respect to the residence time.
- Full Text:
- Date Issued: 2016
Ecological principles for honeybush (Cyclopia spp.) conservation and cultivation
- Authors: Beyers, Andrea
- Date: 2016
- Subjects: Fynbos -- South Africa , Rooibos tea industry -- South Africa , Herbal teas -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/5723 , vital:20975
- Description: Market demand for the fynbos-derived honeybush (Cyclopia spp.) tea is on the rise, and there is an urgent need for better conservation of wild Cyclopia populations and for a shift to sustainable cultivation. Rooibos is another popular fynbos product that underwent exponential market growth over the last two decades but this resulted in large-scale conversion of pristine mountain fynbos to intensively-used crop lands. Adopting a conservation agriculture approach in expanding indigenous products will help in conserving biodiversity and ecosystem processes in this global biodiversity hotspot. Conservation agriculture of indigenous fynbos products grown in the Cape Floristic Region (CFR) should follow five main principles in order to maximise biodiversity conservation alongside agriculture. These principles are: 1) maintain high diversity at all levels, 2) conserve soil structure and processes, 3) conserve and restore natural ecosystem processes, 4) promote ecosystem stability and self-perpetuation, and 5) maintain natural areas as sources of ecosystem components. Given the negative ecological consequences of the industrialisation of the rooibos industry, it would be in the interest of biodiversity conservation, and even of agriculture, to apply these principles to honeybush cultivation. In order to prevent further fynbos habitat loss, cultivation of honeybush could be catalysed on old fields rather than in ploughed or cleared fynbos. Here I compare germination, growth and survival of two species (Cyclopia intermedia E.Mey. and C. subternata Vogel) between different land use types (ploughed lands, old fields and intact fynbos) and treatments (cleared and uncleared) in the Langkloof, Eastern Cape, over one year. Plots of each land use type were subject to each of these two treatments, although the ploughed plot constituted only a cleared treatment. Growth was highest on ploughed land, while survival and growth were lowest in uncleared fynbos. Cleared fynbos had the lowest germination success in both species, with the other sites and treatments coming out roughly the same. These results show that although ploughed lands give highest yields, growth and survival on old fields without ploughing is comparable with that on ploughed lands and is therefore a feasible alternative. Understanding the recruitment dynamics of honeybush is imperative for adequate conservation of wild populations. Furthermore, understanding this ecological aspect of the genus will help in developing the honeybush industry as a sustainable, agroecological market that uses semi-natural populations for production. Although Cyclopia species are early-successional species that germinate after fire, recruitment of Cyclopia pubescens Eckl. & Zeyh. continues throughout the inter-fire period. Cyclopia pubescens populations near Port Elizabeth were described according to their age structure and plant densities to discern possible density-dependent recruitment effects. Results showed that dense stands for the most part do not support high post-fire recruitment. This gives insight into suitable planting densities for new or restore populations and into management guidelines for remnant populations of threatened species. This thesis highlights important issues facing the honeybush industry. Mainstreaming biodiversity conservation into honeybush production is achievable, given that the industry is still relatively young, but this will require further research and strong market leadership.
- Full Text:
- Date Issued: 2016
- Authors: Beyers, Andrea
- Date: 2016
- Subjects: Fynbos -- South Africa , Rooibos tea industry -- South Africa , Herbal teas -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/5723 , vital:20975
- Description: Market demand for the fynbos-derived honeybush (Cyclopia spp.) tea is on the rise, and there is an urgent need for better conservation of wild Cyclopia populations and for a shift to sustainable cultivation. Rooibos is another popular fynbos product that underwent exponential market growth over the last two decades but this resulted in large-scale conversion of pristine mountain fynbos to intensively-used crop lands. Adopting a conservation agriculture approach in expanding indigenous products will help in conserving biodiversity and ecosystem processes in this global biodiversity hotspot. Conservation agriculture of indigenous fynbos products grown in the Cape Floristic Region (CFR) should follow five main principles in order to maximise biodiversity conservation alongside agriculture. These principles are: 1) maintain high diversity at all levels, 2) conserve soil structure and processes, 3) conserve and restore natural ecosystem processes, 4) promote ecosystem stability and self-perpetuation, and 5) maintain natural areas as sources of ecosystem components. Given the negative ecological consequences of the industrialisation of the rooibos industry, it would be in the interest of biodiversity conservation, and even of agriculture, to apply these principles to honeybush cultivation. In order to prevent further fynbos habitat loss, cultivation of honeybush could be catalysed on old fields rather than in ploughed or cleared fynbos. Here I compare germination, growth and survival of two species (Cyclopia intermedia E.Mey. and C. subternata Vogel) between different land use types (ploughed lands, old fields and intact fynbos) and treatments (cleared and uncleared) in the Langkloof, Eastern Cape, over one year. Plots of each land use type were subject to each of these two treatments, although the ploughed plot constituted only a cleared treatment. Growth was highest on ploughed land, while survival and growth were lowest in uncleared fynbos. Cleared fynbos had the lowest germination success in both species, with the other sites and treatments coming out roughly the same. These results show that although ploughed lands give highest yields, growth and survival on old fields without ploughing is comparable with that on ploughed lands and is therefore a feasible alternative. Understanding the recruitment dynamics of honeybush is imperative for adequate conservation of wild populations. Furthermore, understanding this ecological aspect of the genus will help in developing the honeybush industry as a sustainable, agroecological market that uses semi-natural populations for production. Although Cyclopia species are early-successional species that germinate after fire, recruitment of Cyclopia pubescens Eckl. & Zeyh. continues throughout the inter-fire period. Cyclopia pubescens populations near Port Elizabeth were described according to their age structure and plant densities to discern possible density-dependent recruitment effects. Results showed that dense stands for the most part do not support high post-fire recruitment. This gives insight into suitable planting densities for new or restore populations and into management guidelines for remnant populations of threatened species. This thesis highlights important issues facing the honeybush industry. Mainstreaming biodiversity conservation into honeybush production is achievable, given that the industry is still relatively young, but this will require further research and strong market leadership.
- Full Text:
- Date Issued: 2016
The development and evaluation of a new manufacturing process for β-sitosterol-D glucoside
- Mtyopo, Mthetheleli Bethwell
- Authors: Mtyopo, Mthetheleli Bethwell
- Date: 2016
- Subjects: Pharmaceutical chemistry Chemistry, Organic
- Language: English
- Type: Thesis , Doctoral , DTech
- Identifier: http://hdl.handle.net/10948/45920 , vital:39320
- Description: The existing production sequence of β-sitosterol-D-glucoside, a glucoside used in an “over-the-counter” (OTC) preparation under the brand name of Moducare® comprises of three process steps with an overall yield of less than 20%. The low yield is partly due to the instability of intermediates at reaction temperatures > 0oC, and partly due to the thermodynamic equilibrium between two stereoisomers. An economically alternative process was developed, evaluated and scaled-up in a 2l reactor. The project was initiated with a specific limitation in terms of the starting material that comprised a mixture of plant sterols, which necessitated a study of the isolation and purification of the desired product from a rather complex reaction mixture. The use of silver as halide acceptor for the Koenigs-Knorr synthesis did not give statistically significant different results from the same approach but using cadmium as halide acceptor instead. However, using the direct O-glucosylation approach not only gave statistically significant higher results, but also resulted in a much more convenient procedure. Under optimum conditions, a yield of approximately 83% (isolated) of 2,3,4,6- tetra-О-acetyl-β-sitosterol-D-glucoside could be achieved, which was substantially higher than that achieved with the traditional Koenigs-Knorr methodology and above reported yields in the literature (60-80%) for direct glycosylation. Separation of 2,3,4,6-tetra-О-acetyl-β-sitosterol-D-glucoside (BSSGT) from a reaction mixture that contains 2,3,4,6-tetra-О-acetyl-campesterol-D-glucoside (CSGT), 2,3,4,6-tetra-О-acetyl campestanol-glucoside (CSSGT), and 2,3,4,6-tetra-О-acetyl-sitostanol-Dglucoside (SSGT) was investigated using column chromatography. When using silica gel particles, very good separation efficiency and product recovery could be achieved using hexane/ethyl hexane as eluent. The isolated 2,3,4,6-tetra-О-acetyl-β-sitosterol-Dglucoside was easily hydrolysed to β-sitosterol-D-glucoside in high yields (79%) using methanolic KOH. The process for the production of β-sitosterol-D-glucoside was scaled-up from the laboratory bench scale (250 cm3) to a laboratory scale of 2 l using the direct Oglycosylation method. The overall yields of the scaled reaction for β-sitosterol-D-glucoside was slightly above the literature reported values (59%, 8/92) for the KnoenigsKnorr synthesis and compares well above (62%, 0/100) the current production process (less than 20% yields). When using catalogue prices, the material costs (without recycling) for the direct Oglucosylation route is approximately 57% less for the synthesis of 1kg of β-sitosterol-Dglucoside compared to the Koenigs-Knorr route. Given further savings for recycling, the direct O-glucosylation route provides an attractive alternative route for the synthesis ofthe target compound.
- Full Text:
- Date Issued: 2016
- Authors: Mtyopo, Mthetheleli Bethwell
- Date: 2016
- Subjects: Pharmaceutical chemistry Chemistry, Organic
- Language: English
- Type: Thesis , Doctoral , DTech
- Identifier: http://hdl.handle.net/10948/45920 , vital:39320
- Description: The existing production sequence of β-sitosterol-D-glucoside, a glucoside used in an “over-the-counter” (OTC) preparation under the brand name of Moducare® comprises of three process steps with an overall yield of less than 20%. The low yield is partly due to the instability of intermediates at reaction temperatures > 0oC, and partly due to the thermodynamic equilibrium between two stereoisomers. An economically alternative process was developed, evaluated and scaled-up in a 2l reactor. The project was initiated with a specific limitation in terms of the starting material that comprised a mixture of plant sterols, which necessitated a study of the isolation and purification of the desired product from a rather complex reaction mixture. The use of silver as halide acceptor for the Koenigs-Knorr synthesis did not give statistically significant different results from the same approach but using cadmium as halide acceptor instead. However, using the direct O-glucosylation approach not only gave statistically significant higher results, but also resulted in a much more convenient procedure. Under optimum conditions, a yield of approximately 83% (isolated) of 2,3,4,6- tetra-О-acetyl-β-sitosterol-D-glucoside could be achieved, which was substantially higher than that achieved with the traditional Koenigs-Knorr methodology and above reported yields in the literature (60-80%) for direct glycosylation. Separation of 2,3,4,6-tetra-О-acetyl-β-sitosterol-D-glucoside (BSSGT) from a reaction mixture that contains 2,3,4,6-tetra-О-acetyl-campesterol-D-glucoside (CSGT), 2,3,4,6-tetra-О-acetyl campestanol-glucoside (CSSGT), and 2,3,4,6-tetra-О-acetyl-sitostanol-Dglucoside (SSGT) was investigated using column chromatography. When using silica gel particles, very good separation efficiency and product recovery could be achieved using hexane/ethyl hexane as eluent. The isolated 2,3,4,6-tetra-О-acetyl-β-sitosterol-Dglucoside was easily hydrolysed to β-sitosterol-D-glucoside in high yields (79%) using methanolic KOH. The process for the production of β-sitosterol-D-glucoside was scaled-up from the laboratory bench scale (250 cm3) to a laboratory scale of 2 l using the direct Oglycosylation method. The overall yields of the scaled reaction for β-sitosterol-D-glucoside was slightly above the literature reported values (59%, 8/92) for the KnoenigsKnorr synthesis and compares well above (62%, 0/100) the current production process (less than 20% yields). When using catalogue prices, the material costs (without recycling) for the direct Oglucosylation route is approximately 57% less for the synthesis of 1kg of β-sitosterol-Dglucoside compared to the Koenigs-Knorr route. Given further savings for recycling, the direct O-glucosylation route provides an attractive alternative route for the synthesis ofthe target compound.
- Full Text:
- Date Issued: 2016
A business intelligence framework for supporting strategic sustainability information management in higher education
- Authors: Haupt, Ross
- Date: 2016
- Subjects: Business intelligence , Strategic planning -- Management
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: http://hdl.handle.net/10948/5319 , vital:20832
- Description: In the higher education sector, a number of Higher Education Institutions (HEIs) are playing a leading role in promoting sustainable initiatives. Effectively managing these initiatives however can be a complex task and requires data and information from multiple aspects of operations. In an HEI, operating sustainably means ensuring financial sustainability, social sustainability, environmental sustainability and educational sustainability. In order to manage sustainability effectively, HEIs require an integrated tool that can provide information on all areas of sustainability. HEIs face a number of challenges in effectively managing sustainability information, such as siloed data and information, and poor sharing and communication of information. Business Intelligence (BI) can assist in overcoming many of the challenges faced by organisations in effectively managing strategic sustainability information. This study investigates both the constraints to effective sustainability information management and the challenges of BI. A BI framework to support effective strategic sustainability information management is proposed. Nelson Mandela Metropolitan University (NMMU) is one such HEI, which is affected by the challenges of managing strategic sustainability information. NMMU is therefore used as a case study in this research. A BI solution, Sustainable BI, was developed based on the proposed framework. The main goal of sustainable BI is to provide strategic management at NMMU with a tool that can provide integrated sustainability information that can assist in overcoming the challenges in effectively managing strategic sustainability information. Sustainable BI was evaluated by strategic management at NMMU who are responsible for managing sustainability at NMMU. The evaluation took place through a usability study. The study revealed to what extent Sustainable BI could effectively manage strategic sustainability information at NMMU. The BI framework was iteratively improved on based on the results of the evaluations. The contributions from this study are a model for sustainability management, a BI Framework to support strategic sustainability information management and a BI solution, Sustainable BI.
- Full Text:
- Date Issued: 2016
- Authors: Haupt, Ross
- Date: 2016
- Subjects: Business intelligence , Strategic planning -- Management
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: http://hdl.handle.net/10948/5319 , vital:20832
- Description: In the higher education sector, a number of Higher Education Institutions (HEIs) are playing a leading role in promoting sustainable initiatives. Effectively managing these initiatives however can be a complex task and requires data and information from multiple aspects of operations. In an HEI, operating sustainably means ensuring financial sustainability, social sustainability, environmental sustainability and educational sustainability. In order to manage sustainability effectively, HEIs require an integrated tool that can provide information on all areas of sustainability. HEIs face a number of challenges in effectively managing sustainability information, such as siloed data and information, and poor sharing and communication of information. Business Intelligence (BI) can assist in overcoming many of the challenges faced by organisations in effectively managing strategic sustainability information. This study investigates both the constraints to effective sustainability information management and the challenges of BI. A BI framework to support effective strategic sustainability information management is proposed. Nelson Mandela Metropolitan University (NMMU) is one such HEI, which is affected by the challenges of managing strategic sustainability information. NMMU is therefore used as a case study in this research. A BI solution, Sustainable BI, was developed based on the proposed framework. The main goal of sustainable BI is to provide strategic management at NMMU with a tool that can provide integrated sustainability information that can assist in overcoming the challenges in effectively managing strategic sustainability information. Sustainable BI was evaluated by strategic management at NMMU who are responsible for managing sustainability at NMMU. The evaluation took place through a usability study. The study revealed to what extent Sustainable BI could effectively manage strategic sustainability information at NMMU. The BI framework was iteratively improved on based on the results of the evaluations. The contributions from this study are a model for sustainability management, a BI Framework to support strategic sustainability information management and a BI solution, Sustainable BI.
- Full Text:
- Date Issued: 2016
Development of Palladium selective reagents and materials
- Authors: Moyo, Cyprian Bertrand
- Date: 2016
- Subjects: Palladium Palladium compounds -- Industrial applications Chemistry, Inorganic
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/12231 , vital:27046
- Description: The adsorption and separation of Pd(II) from Pt(IV), Ir(IV) and Rh(III) by silica microparticles functionalized with triethylenetetramine (TETA), 2-(2-aminoethylthio)ethanamine (NSN) and 2-(2-(2-aminoethyl)ethylthio)ethanamine (NSSN) in 1 M hydrochloric acid medium was investigated by continuous column studies. The functionalized sorbent materials were characterized by microanalysis, SEM-EDS and FT-IR. Palladium selectivity of the sorbent materials was achieved by stripping of rhodium, iridium and platinum chlorido species with 0.5 M of NaClO4 in 1 M HCl while [PdCl4]2 was eluted with 3% w/v thiourea. The desorption efficiency of thiourea was confirmed by the SEM-EDS analysis of the materials after Pd(II) elution. Palladium loading capacity of the sorbents were in the order S-NSSN (23.85 mg/g) > S-NSN (12.70 mg/g) > S-TETA (4.97 mg/g). The extraction patterns on the sorbent materials were explained by considering the coordination chemistry of the ligand with [PdCl4]2ˉ and ionic interactions of [PtCl6]2ˉ and [IrCl5(H2O]ˉ. The square planar complexes, [Pd(HNSSNH)Cl2]Cl2 and [Pd(NSNH)Cl2][PdCl4]2, were isolated, analyzed by spectroscopy and single crystal X-ray, whereas evidence of the fraction of Pd(II)-TETA complex was obtained by HPLC studies. This provided proof of the inner sphere coordination mechanism as the mode of interaction of these ligands with [PdCl4]2ˉ. Trace amounts of Brˉ anions in ligands resulted in the inadvertent isolation of bromide coordinated Pd(II) NSN and NSSN complexes. The ion-pair salts of [TETAH4]4+ with [PtCl6]2ˉ, [IrCl6]3ˉ and [RhCl6]3ˉ were also isolated and characterized by microanalysis and IR to further explain the extraction patterns.
- Full Text:
- Date Issued: 2016
- Authors: Moyo, Cyprian Bertrand
- Date: 2016
- Subjects: Palladium Palladium compounds -- Industrial applications Chemistry, Inorganic
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/12231 , vital:27046
- Description: The adsorption and separation of Pd(II) from Pt(IV), Ir(IV) and Rh(III) by silica microparticles functionalized with triethylenetetramine (TETA), 2-(2-aminoethylthio)ethanamine (NSN) and 2-(2-(2-aminoethyl)ethylthio)ethanamine (NSSN) in 1 M hydrochloric acid medium was investigated by continuous column studies. The functionalized sorbent materials were characterized by microanalysis, SEM-EDS and FT-IR. Palladium selectivity of the sorbent materials was achieved by stripping of rhodium, iridium and platinum chlorido species with 0.5 M of NaClO4 in 1 M HCl while [PdCl4]2 was eluted with 3% w/v thiourea. The desorption efficiency of thiourea was confirmed by the SEM-EDS analysis of the materials after Pd(II) elution. Palladium loading capacity of the sorbents were in the order S-NSSN (23.85 mg/g) > S-NSN (12.70 mg/g) > S-TETA (4.97 mg/g). The extraction patterns on the sorbent materials were explained by considering the coordination chemistry of the ligand with [PdCl4]2ˉ and ionic interactions of [PtCl6]2ˉ and [IrCl5(H2O]ˉ. The square planar complexes, [Pd(HNSSNH)Cl2]Cl2 and [Pd(NSNH)Cl2][PdCl4]2, were isolated, analyzed by spectroscopy and single crystal X-ray, whereas evidence of the fraction of Pd(II)-TETA complex was obtained by HPLC studies. This provided proof of the inner sphere coordination mechanism as the mode of interaction of these ligands with [PdCl4]2ˉ. Trace amounts of Brˉ anions in ligands resulted in the inadvertent isolation of bromide coordinated Pd(II) NSN and NSSN complexes. The ion-pair salts of [TETAH4]4+ with [PtCl6]2ˉ, [IrCl6]3ˉ and [RhCl6]3ˉ were also isolated and characterized by microanalysis and IR to further explain the extraction patterns.
- Full Text:
- Date Issued: 2016
Assessing the productivity of selective container terminals in Africa using Data Envelopment Analysis (DEA)
- Mienie, Barend Jacobus, Brettenny, Warren
- Authors: Mienie, Barend Jacobus , Brettenny, Warren
- Date: 2016
- Subjects: Data envelopment analysis -- Africa Employees -- Rating of -- Africa
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: http://hdl.handle.net/10948/12054 , vital:27026
- Description: Data envelopment analysis (DEA) is used to assess the efficiency of 15 container terminals in Africa. The models proposed by Charnes, Cooper and Rhodes (1978) and Banker, Charnes and Cooper (1984) are used to determine and rank the efficiencies of the container terminals for 2013 and 2014. The results show that selected South African container terminals can improve on their operations relative to some of their neighbours to the North. Bootstrapping methods are used to investigate and clarify the results. The Malmquist Productivity Index (MPI) model is used to track and explain changes in efficiency over the period of assessment.
- Full Text:
- Date Issued: 2016
- Authors: Mienie, Barend Jacobus , Brettenny, Warren
- Date: 2016
- Subjects: Data envelopment analysis -- Africa Employees -- Rating of -- Africa
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: http://hdl.handle.net/10948/12054 , vital:27026
- Description: Data envelopment analysis (DEA) is used to assess the efficiency of 15 container terminals in Africa. The models proposed by Charnes, Cooper and Rhodes (1978) and Banker, Charnes and Cooper (1984) are used to determine and rank the efficiencies of the container terminals for 2013 and 2014. The results show that selected South African container terminals can improve on their operations relative to some of their neighbours to the North. Bootstrapping methods are used to investigate and clarify the results. The Malmquist Productivity Index (MPI) model is used to track and explain changes in efficiency over the period of assessment.
- Full Text:
- Date Issued: 2016
An investigation of the morphological and electrochemical properties of spinel cathode oxide materials used in li-ion batteries
- Authors: Snyders, Charmelle
- Date: 2016
- Subjects: Lithium ion batteries Cathodes
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/12929 , vital:27135
- Description: Li-ion batteries have become the more dominant battery type used in portable electronic devices such as cell phones, computers and more recently their application in full electric vehicles (EV). Li-ion batteries have many advantages over the traditional rechargeable systems (Pb-acid and Ni-MH) such as their higher energy density, low self-discharge, long capacity cycle life and relatively maintenance free. Due to their commercial advantages, a lot of research is done in developing new novel Li-ion electrode materials, improving existing ones and to reduce manufacturing costs in order to make them more cost effective in their applications. This study looked at the cathode material chemistry that has a typical spinel manganese oxide (LiMn2O4) type structure. For comparison the study also considered the influence of doping the phase with various metals such as Al, Mg, Co and Ni that were made as precursors using various carboxylic acids (Citric, Ascorbic, Succinic and Poly-acrylic acid) from a sol-gel process. Traditional batch methods of synthesizing the electrode material is costly and do not necessarily provide optimized electrochemical performance. Alternative continuous less energy intensive methods would help reduce the costs of the preparation of the electrode materials. This study investigated the influence of two synthesis techniques on the materials physical and electrochemical characteristics. These synthesis methods included the use of a typical batch sol-gel method and the continuous spray-drying technique. The spinel materials were prepared and characterized by Powder X-Ray Diffraction (PXRD) to confirm the formation of various phases during the synthesis process. In addition, in-situ PXRD techniques were used to track the phase changes that occurred in the typical batch synthesis process from a sol-gel mixture to the final crystalline spinel oxide. The materials were also characterized by thermal gravimetric analysis (TGA), whereby the materials decomposition mechanisms were observed as the precursor was gradually heated to the final oxide. These synthesized materials prepared under various conditions were then used to build suitable Li-ion coin type of cells, whereby their electrochemical properties were tested by simple capacity tests and electrochemical impedance spectroscopy (EIS). EIS measurements were done on the built cells with the various materials at various charge voltages. TG analysis showed that the materials underwent multiple decomposition steps upon heating for the doped lithium manganese oxides, whereas the undoped oxide showed only a single decomposition step. The results showed that all the materials achieved their weight loss below 400 °C, and that the final spinel oxide had already formed. The in-situ PXRD analysis showed the progression of the phase transitions where certain of the materials changed from a crystalline precursor to an amorphous intermediate phase and then finally to the spinel cathode oxide (Li1.03Mg0.2Mn1.77O4, and LiCo1.09Mn0.91O4). For other materials, the precursor would start as an amorphous phase, and then upon heating, convert into an impure intermediate phase (Mn2O3) before forming the final spinel oxide (Li1.03Mn1.97O4 and LiNi0.5Mn1.5O4). The in-situ study also showed the increases in the materials respective lattice parameters of the crystalline unit cells upon heating and the significant increases in their crystallite sizes when heated above 600 °C. Hence the results implied that a type of sintering of the particles would occur at temperatures above 600 °C, thereby increasing the respective crystallite size. The study showed that the cathode active materials made by the sol-gel spray-drying method would give a material that had a significantly larger surface area and a smaller crystallite size when compared to the materials made by the batch process. The electrochemical analysis showed that there was only a slight increase in the discharge capacities of the cells made with the spray-drying technique when compared to the cells made with the materials from the batch sol-gel technique. Whereas, the EIS study showed that there were distinct differences in the charging behavior of the cells made with the various materials using different synthesis techniques. The EIS results showed that there was a general decrease in the cells charge transfer resistance (Rct) as the charge potential increased regardless of the synthesis method used for the various materials. The results also showed that the lithium-ion diffusion coefficient (DLi) obtained from EIS measurements were in most of the samples higher for the cathode materials that had a larger surface area. This implied that the Li-ion could diffuse at a faster rate through the bulk material. The study concluded that by optimizing the synthesis process in terms of the careful control of the thermal parameters, the Li-ion batteries‟ cathode active material of the manganese spinel type could be optimized and be manufactured by using a continuous flow micro spray process.
- Full Text:
- Date Issued: 2016
- Authors: Snyders, Charmelle
- Date: 2016
- Subjects: Lithium ion batteries Cathodes
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/12929 , vital:27135
- Description: Li-ion batteries have become the more dominant battery type used in portable electronic devices such as cell phones, computers and more recently their application in full electric vehicles (EV). Li-ion batteries have many advantages over the traditional rechargeable systems (Pb-acid and Ni-MH) such as their higher energy density, low self-discharge, long capacity cycle life and relatively maintenance free. Due to their commercial advantages, a lot of research is done in developing new novel Li-ion electrode materials, improving existing ones and to reduce manufacturing costs in order to make them more cost effective in their applications. This study looked at the cathode material chemistry that has a typical spinel manganese oxide (LiMn2O4) type structure. For comparison the study also considered the influence of doping the phase with various metals such as Al, Mg, Co and Ni that were made as precursors using various carboxylic acids (Citric, Ascorbic, Succinic and Poly-acrylic acid) from a sol-gel process. Traditional batch methods of synthesizing the electrode material is costly and do not necessarily provide optimized electrochemical performance. Alternative continuous less energy intensive methods would help reduce the costs of the preparation of the electrode materials. This study investigated the influence of two synthesis techniques on the materials physical and electrochemical characteristics. These synthesis methods included the use of a typical batch sol-gel method and the continuous spray-drying technique. The spinel materials were prepared and characterized by Powder X-Ray Diffraction (PXRD) to confirm the formation of various phases during the synthesis process. In addition, in-situ PXRD techniques were used to track the phase changes that occurred in the typical batch synthesis process from a sol-gel mixture to the final crystalline spinel oxide. The materials were also characterized by thermal gravimetric analysis (TGA), whereby the materials decomposition mechanisms were observed as the precursor was gradually heated to the final oxide. These synthesized materials prepared under various conditions were then used to build suitable Li-ion coin type of cells, whereby their electrochemical properties were tested by simple capacity tests and electrochemical impedance spectroscopy (EIS). EIS measurements were done on the built cells with the various materials at various charge voltages. TG analysis showed that the materials underwent multiple decomposition steps upon heating for the doped lithium manganese oxides, whereas the undoped oxide showed only a single decomposition step. The results showed that all the materials achieved their weight loss below 400 °C, and that the final spinel oxide had already formed. The in-situ PXRD analysis showed the progression of the phase transitions where certain of the materials changed from a crystalline precursor to an amorphous intermediate phase and then finally to the spinel cathode oxide (Li1.03Mg0.2Mn1.77O4, and LiCo1.09Mn0.91O4). For other materials, the precursor would start as an amorphous phase, and then upon heating, convert into an impure intermediate phase (Mn2O3) before forming the final spinel oxide (Li1.03Mn1.97O4 and LiNi0.5Mn1.5O4). The in-situ study also showed the increases in the materials respective lattice parameters of the crystalline unit cells upon heating and the significant increases in their crystallite sizes when heated above 600 °C. Hence the results implied that a type of sintering of the particles would occur at temperatures above 600 °C, thereby increasing the respective crystallite size. The study showed that the cathode active materials made by the sol-gel spray-drying method would give a material that had a significantly larger surface area and a smaller crystallite size when compared to the materials made by the batch process. The electrochemical analysis showed that there was only a slight increase in the discharge capacities of the cells made with the spray-drying technique when compared to the cells made with the materials from the batch sol-gel technique. Whereas, the EIS study showed that there were distinct differences in the charging behavior of the cells made with the various materials using different synthesis techniques. The EIS results showed that there was a general decrease in the cells charge transfer resistance (Rct) as the charge potential increased regardless of the synthesis method used for the various materials. The results also showed that the lithium-ion diffusion coefficient (DLi) obtained from EIS measurements were in most of the samples higher for the cathode materials that had a larger surface area. This implied that the Li-ion could diffuse at a faster rate through the bulk material. The study concluded that by optimizing the synthesis process in terms of the careful control of the thermal parameters, the Li-ion batteries‟ cathode active material of the manganese spinel type could be optimized and be manufactured by using a continuous flow micro spray process.
- Full Text:
- Date Issued: 2016
Synthesis and characterisation of lanthanide complexes with nitrogen- and oxygen-donor ligands
- Authors: Madanhire, Tatenda
- Date: 2016
- Subjects: Rare earth metals
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/13127 , vital:27154
- Description: The reactions of Ln(NO3)3∙6H2O (Ln = Pr, Nd or Er) with the potentially tridentate O,N,O chelating ligand 2,6-pyridinedimethanol (H2pydm) were investigated, and complexes with the formula, [Ln(H2pydm)2(NO3)2](NO3) (Ln = Pr or Nd) and [Er(H2pydm)3](NO3)3 were isolated. The ten-coordinate Pr(III) and Nd(III) compounds crystallise in the triclinic space group P-1 while the nine-coordinate Er(III) complex crystallises in the monoclinic system (P21/n). The reaction of PrCl3∙6H2O with H2pydm yielded the compound, [Pr(H2pydm)3](Cl)3, that crystallises in the monoclinic system, space group P21/c with α = 90, β = 98.680(1) and γ = 90°. The nine-coordinate Pr(III) ion is bound to three H2pydm ligands, with bond distances Pr-O 2.455(2)-2.478(2) Å and Pr-N 2.6355(19)-2.64(2) Å. X-ray crystal structures of all the H2pydm complexes reveal that the ligand coordinates tridentately, via the pyridyl nitrogen atom and the two hydroxyl oxygen atoms. The electronic absorption spectra of complexes show 4f-4f transitions. Rare-earth complexes, [Ln(H2L1)2(NO3)3] [Ln = Gd, Ho or Nd], were also prepared from a Schiff base. The X-ray single-crystal diffraction studies and SHAPE analyses of the Gd(III) and Ho(III) complexes shows that the complexes are ten-coordinate and exhibit distorted tetradecahedron geometries. With proton migration occurring from the phenol group to the imine function, complexation of the lanthanides to the ligand gives the ligand a zwitterionic phenoxo-iminium form. A phenolate oxygen-bridged dinuclear complex, [Ce2(H2L1)(ovan)3(NO3)3], has been obtained by reacting Ce(NO3)3∙6H2O with an o-vanillin derived Schiff base ligand, 2-((E)-(1-hydroxy-2-methylpropan-2-ylimino)methyl)-6-methoxyphenol (H2L1). Hydrolysis of the Schiff base occurred to yield o-vanillin, which bridged two cerium atoms with the Ce∙∙∙Ce distance equal to 3.823 Å. The Ce(III) ions are both tencoordinate, but have different coordination environments, showing tetradecahedron and staggered dodecahedron geometries, respectively. The reaction of salicylaldehyde-N(4)-diethylthiosemicarbazone (H2L2) in the presence of hydrated Ln(III) nitrates led to the isolation of two novel compounds: (E)-2[(ortho-hydroxy)benzylidene]-2-(thiomethyl)-thionohydrazide (1) and bis[2,3-diaza4-(2-hydroxyphenyl)-1-thiomethyl-buta-1,3-diene]disulfide. The latter is a dimer of the former. For this asymmetric Schiff base, 1 and the symmetric disulfide, classical hydrogen bonds of the O–H∙∙∙N as well as N–H∙∙∙S (for 1) type are apparent next to C–H∙∙∙O contacts. 4-(4-Bromophenyl)-1-(propan-2-ylidene)thiosemicarbazide was also prepared upon reacting 4-(4-bromophenyl)-3-thiosemicarbazide with acetone in the presence of ethanol and La(NO3)3∙6H2O. The C=S bond length was found to be 1.6686(16) Å which is in good agreement with other thioketones whose metrical parameters have been deposited with the Cambridge Structural Database. Classical hydrogen bonds of the N–H∙∙∙N and the N–H∙∙∙Br type are observed next to C–H∙∙∙S contacts. All synthesised compounds were characterised by microanalyses, single-crystal X-ray diffraction (except for [Nd(H2L1)2(NO3)3]), 1H NMR and IR spectroscopy.
- Full Text:
- Date Issued: 2016
- Authors: Madanhire, Tatenda
- Date: 2016
- Subjects: Rare earth metals
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/13127 , vital:27154
- Description: The reactions of Ln(NO3)3∙6H2O (Ln = Pr, Nd or Er) with the potentially tridentate O,N,O chelating ligand 2,6-pyridinedimethanol (H2pydm) were investigated, and complexes with the formula, [Ln(H2pydm)2(NO3)2](NO3) (Ln = Pr or Nd) and [Er(H2pydm)3](NO3)3 were isolated. The ten-coordinate Pr(III) and Nd(III) compounds crystallise in the triclinic space group P-1 while the nine-coordinate Er(III) complex crystallises in the monoclinic system (P21/n). The reaction of PrCl3∙6H2O with H2pydm yielded the compound, [Pr(H2pydm)3](Cl)3, that crystallises in the monoclinic system, space group P21/c with α = 90, β = 98.680(1) and γ = 90°. The nine-coordinate Pr(III) ion is bound to three H2pydm ligands, with bond distances Pr-O 2.455(2)-2.478(2) Å and Pr-N 2.6355(19)-2.64(2) Å. X-ray crystal structures of all the H2pydm complexes reveal that the ligand coordinates tridentately, via the pyridyl nitrogen atom and the two hydroxyl oxygen atoms. The electronic absorption spectra of complexes show 4f-4f transitions. Rare-earth complexes, [Ln(H2L1)2(NO3)3] [Ln = Gd, Ho or Nd], were also prepared from a Schiff base. The X-ray single-crystal diffraction studies and SHAPE analyses of the Gd(III) and Ho(III) complexes shows that the complexes are ten-coordinate and exhibit distorted tetradecahedron geometries. With proton migration occurring from the phenol group to the imine function, complexation of the lanthanides to the ligand gives the ligand a zwitterionic phenoxo-iminium form. A phenolate oxygen-bridged dinuclear complex, [Ce2(H2L1)(ovan)3(NO3)3], has been obtained by reacting Ce(NO3)3∙6H2O with an o-vanillin derived Schiff base ligand, 2-((E)-(1-hydroxy-2-methylpropan-2-ylimino)methyl)-6-methoxyphenol (H2L1). Hydrolysis of the Schiff base occurred to yield o-vanillin, which bridged two cerium atoms with the Ce∙∙∙Ce distance equal to 3.823 Å. The Ce(III) ions are both tencoordinate, but have different coordination environments, showing tetradecahedron and staggered dodecahedron geometries, respectively. The reaction of salicylaldehyde-N(4)-diethylthiosemicarbazone (H2L2) in the presence of hydrated Ln(III) nitrates led to the isolation of two novel compounds: (E)-2[(ortho-hydroxy)benzylidene]-2-(thiomethyl)-thionohydrazide (1) and bis[2,3-diaza4-(2-hydroxyphenyl)-1-thiomethyl-buta-1,3-diene]disulfide. The latter is a dimer of the former. For this asymmetric Schiff base, 1 and the symmetric disulfide, classical hydrogen bonds of the O–H∙∙∙N as well as N–H∙∙∙S (for 1) type are apparent next to C–H∙∙∙O contacts. 4-(4-Bromophenyl)-1-(propan-2-ylidene)thiosemicarbazide was also prepared upon reacting 4-(4-bromophenyl)-3-thiosemicarbazide with acetone in the presence of ethanol and La(NO3)3∙6H2O. The C=S bond length was found to be 1.6686(16) Å which is in good agreement with other thioketones whose metrical parameters have been deposited with the Cambridge Structural Database. Classical hydrogen bonds of the N–H∙∙∙N and the N–H∙∙∙Br type are observed next to C–H∙∙∙S contacts. All synthesised compounds were characterised by microanalyses, single-crystal X-ray diffraction (except for [Nd(H2L1)2(NO3)3]), 1H NMR and IR spectroscopy.
- Full Text:
- Date Issued: 2016
Seasonal physiological responses in the Cape Rockjumper (Chaetops frenatus): a Fynbos endemic bird shows limited capacity to deal with temperature extremes
- Authors: Oswald, Krista Natasha
- Date: 2016
- Subjects: Endemic birds -- South Africa Fynbos ecology -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/12994 , vital:27142
- Description: The Fynbos biome in south-western South Africa is a global biodiversity hotspot vulnerable to climate change. Of the six Fynbos-endemic passerines, Cape Rockjumpers (hereafter Rockjumpers; Chaetops frenatus) are most vulnerable to increases in temperature, with population declines correlated with warming, and low physiological heat thresholds. Rockjumper’s preferred mountain habitat is predicted to decrease as they lack opportunity to move to cooler regions as temperatures warm. As Rockjumpers currently occupy the coldest regions of the Fynbos, I hypothesized their thermal physiology would show cold adaptation at the expense of lowered ability to cope with higher temperatures. I aimed to determine the seasonal 1) maintenance metabolism and cold tolerance, and 2) thermoregulatory responses to high temperatures of Rockjumpers. I measured seasonal maintenance metabolic rate, thermal conductance, and maximum thermogenic capacity. I also measured seasonal resting metabolic rate, evaporative water loss, evaporative cooling efficiency, and body temperature at high air temperatures. In winter, Rockjumpers had higher maximum thermogenic capacity, lower maintenance metabolic rate, and lower thermal conductance. Lower maintenance metabolic rates (and thus, lower metabolic heat production) combined with the decreased thermal conductance, confers substantial energy savings in winter. The increased winter maximum thermogenic capacity of Rockjumpers was expected, although the mean seasonal values fell below those expected for a ~ 50 g bird using a global data set, suggesting Rockjumpers are not especially cold tolerant. I further show that in summer Rockjumpers had higher elevations in resting metabolic rates, evaporative water loss, and body temperature, denoting higher rates of heat production and lower heat thresholds in summer compared to winter. My results suggest that Rockjumpers are best suited for relatively mild Krista Oswald Dissertation Chapter 1: General Introduction temperatures. While I found further support for a physiological basis for declining Rockjumper populations, further studies on other mechanisms Rockjumpers may possess to cope with climate warming (e.g. behavioural adjustments) are needed in order to truly understand their vulnerability to climate change.
- Full Text:
- Date Issued: 2016
- Authors: Oswald, Krista Natasha
- Date: 2016
- Subjects: Endemic birds -- South Africa Fynbos ecology -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/12994 , vital:27142
- Description: The Fynbos biome in south-western South Africa is a global biodiversity hotspot vulnerable to climate change. Of the six Fynbos-endemic passerines, Cape Rockjumpers (hereafter Rockjumpers; Chaetops frenatus) are most vulnerable to increases in temperature, with population declines correlated with warming, and low physiological heat thresholds. Rockjumper’s preferred mountain habitat is predicted to decrease as they lack opportunity to move to cooler regions as temperatures warm. As Rockjumpers currently occupy the coldest regions of the Fynbos, I hypothesized their thermal physiology would show cold adaptation at the expense of lowered ability to cope with higher temperatures. I aimed to determine the seasonal 1) maintenance metabolism and cold tolerance, and 2) thermoregulatory responses to high temperatures of Rockjumpers. I measured seasonal maintenance metabolic rate, thermal conductance, and maximum thermogenic capacity. I also measured seasonal resting metabolic rate, evaporative water loss, evaporative cooling efficiency, and body temperature at high air temperatures. In winter, Rockjumpers had higher maximum thermogenic capacity, lower maintenance metabolic rate, and lower thermal conductance. Lower maintenance metabolic rates (and thus, lower metabolic heat production) combined with the decreased thermal conductance, confers substantial energy savings in winter. The increased winter maximum thermogenic capacity of Rockjumpers was expected, although the mean seasonal values fell below those expected for a ~ 50 g bird using a global data set, suggesting Rockjumpers are not especially cold tolerant. I further show that in summer Rockjumpers had higher elevations in resting metabolic rates, evaporative water loss, and body temperature, denoting higher rates of heat production and lower heat thresholds in summer compared to winter. My results suggest that Rockjumpers are best suited for relatively mild Krista Oswald Dissertation Chapter 1: General Introduction temperatures. While I found further support for a physiological basis for declining Rockjumper populations, further studies on other mechanisms Rockjumpers may possess to cope with climate warming (e.g. behavioural adjustments) are needed in order to truly understand their vulnerability to climate change.
- Full Text:
- Date Issued: 2016
Trends in the game industry in the Eastern Cape
- Authors: Ferreira, Janene
- Date: 2016
- Subjects: Game farms -- South Africa -- Eastern Cape -- Management , Wildlife management -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/5451 , vital:20846
- Description: The game industry has become one of the fastest-growing industries in South Africa and consequently, during recent years, a growing number of stock farms have been converted to game farms. All forms of utilization within the game industry play a vital role with regards to sustainability and simultaneously contributing a significant boost to the national economy. It is therefore important to ensure that game ranchers are as well-informed as possible in their decision-making, as well as in assessing their outputs and endeavours. However, the information available on the game industry in the Eastern Cape is limited. This research study therefore focuses on the emerging trends in the game industry in the province. The objectives of the research are to examine various pertinent factors associated with the game industry, investigate the trends and discuss whether these trends have any implications for future purposes. The research commenced with a literature review, as well as information from earlier survey studies of the Eastern Cape game industry. For the current study, a replicate survey was conducted throughout the Eastern Cape, involving as many game ranchers as possible, and data were collected by means of self-administered questionnaires. The dilemma confronting the black wildebeest in the Eastern Cape was thoroughly investigated, together with farmers’ opinions and trends for the future of the species. It was important to include this particular aspect in the research, as at the time of the survey, widespread concerns were expressed with regards to new legislation which emerged during that time. The research cast light on several aspects associated with the industry which could positively assist game ranchers towards improved management and planning, as well as provide guidelines for future development purposes. Furthermore, the research identified crucial issues that should receive immediate attention from stakeholders across the industry as well as government.
- Full Text:
- Date Issued: 2016
- Authors: Ferreira, Janene
- Date: 2016
- Subjects: Game farms -- South Africa -- Eastern Cape -- Management , Wildlife management -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/5451 , vital:20846
- Description: The game industry has become one of the fastest-growing industries in South Africa and consequently, during recent years, a growing number of stock farms have been converted to game farms. All forms of utilization within the game industry play a vital role with regards to sustainability and simultaneously contributing a significant boost to the national economy. It is therefore important to ensure that game ranchers are as well-informed as possible in their decision-making, as well as in assessing their outputs and endeavours. However, the information available on the game industry in the Eastern Cape is limited. This research study therefore focuses on the emerging trends in the game industry in the province. The objectives of the research are to examine various pertinent factors associated with the game industry, investigate the trends and discuss whether these trends have any implications for future purposes. The research commenced with a literature review, as well as information from earlier survey studies of the Eastern Cape game industry. For the current study, a replicate survey was conducted throughout the Eastern Cape, involving as many game ranchers as possible, and data were collected by means of self-administered questionnaires. The dilemma confronting the black wildebeest in the Eastern Cape was thoroughly investigated, together with farmers’ opinions and trends for the future of the species. It was important to include this particular aspect in the research, as at the time of the survey, widespread concerns were expressed with regards to new legislation which emerged during that time. The research cast light on several aspects associated with the industry which could positively assist game ranchers towards improved management and planning, as well as provide guidelines for future development purposes. Furthermore, the research identified crucial issues that should receive immediate attention from stakeholders across the industry as well as government.
- Full Text:
- Date Issued: 2016
Crop yields from organic and conventional farming systems in South Africa's Southern Cape
- Authors: Mashele, N'wa-Jama
- Date: 2016
- Subjects: Organic farming -- South Africa Sustainable agriculture -- South Africa Agricultural systems -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/11637 , vital:26946
- Description: South Africa (SA) is food secure on a national level, however citizens in rural and marginalised areas face household food insecurity due to lack of access to this food. South Africa has low fertility soils and scarce water resources. Climate change reports of unpredictable weather conditions will further exacerbate these challenges. The majority of the agricultural production methods in SA are industrialised and rely heavily on external inputs. Alternative agricultural production methods which are environmentally less taxing, are affordable and yield nutritious food, need to be investigated and adopted. A long-term trial investigating the differences in yields between conventional and organic farming systems was established at the NMMU George Saasveld campus. A baseline study preceded the cropping seasons to establish pre-treatment soil conditions before the two farming systems were be implemented. The trial was a randomized complete block design split into organic, conventional and control plots. In the first cropping season (summer) three crops cabbage (Brassica oleracea var. capitata), sweet potato (Ipomea batatas) and cowpea (vigna ungucuilata) were planted under the different treatments. Soil fertility changes after application of chemical and organic fertilizer were measured. Soil pH and phosphorus increased whilst potassium and soil carbon decreased from baseline levels. The organic plots were found to have higher soil pH, potassium and carbon, whilst P was higher in the conventional plots. The organic cabbages had a yield 12% lower than conventional cabbages, organic cowpeas were 51% lower than conventional cowpeas. Baboons damaged sweet potato plots before maturity. Broccoli (Brassica oleracea var. italica), radish (Raphanus sativa) and green pea (Pisum sativum) were planted in the second cropping season (winter). Organic broccoli yields were 51% lower than conventional broccoli, organic green peas were 18 % lower than conventional green peas. The organic radish yields were 36% lower than conventional yields and this was statically significant. The yield differences were statically significant between control and conventional cabbages (25%) and broccolis (68%). The results indicate that there is on average an initial 25% yield difference between organic and conventional farming systems. Similar studies have shown that the yield gap can be reduced within three to four years. This study presents preliminary results of trials that are to continue for ten years, during which time the yield differences may vary.
- Full Text:
- Date Issued: 2016
- Authors: Mashele, N'wa-Jama
- Date: 2016
- Subjects: Organic farming -- South Africa Sustainable agriculture -- South Africa Agricultural systems -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/11637 , vital:26946
- Description: South Africa (SA) is food secure on a national level, however citizens in rural and marginalised areas face household food insecurity due to lack of access to this food. South Africa has low fertility soils and scarce water resources. Climate change reports of unpredictable weather conditions will further exacerbate these challenges. The majority of the agricultural production methods in SA are industrialised and rely heavily on external inputs. Alternative agricultural production methods which are environmentally less taxing, are affordable and yield nutritious food, need to be investigated and adopted. A long-term trial investigating the differences in yields between conventional and organic farming systems was established at the NMMU George Saasveld campus. A baseline study preceded the cropping seasons to establish pre-treatment soil conditions before the two farming systems were be implemented. The trial was a randomized complete block design split into organic, conventional and control plots. In the first cropping season (summer) three crops cabbage (Brassica oleracea var. capitata), sweet potato (Ipomea batatas) and cowpea (vigna ungucuilata) were planted under the different treatments. Soil fertility changes after application of chemical and organic fertilizer were measured. Soil pH and phosphorus increased whilst potassium and soil carbon decreased from baseline levels. The organic plots were found to have higher soil pH, potassium and carbon, whilst P was higher in the conventional plots. The organic cabbages had a yield 12% lower than conventional cabbages, organic cowpeas were 51% lower than conventional cowpeas. Baboons damaged sweet potato plots before maturity. Broccoli (Brassica oleracea var. italica), radish (Raphanus sativa) and green pea (Pisum sativum) were planted in the second cropping season (winter). Organic broccoli yields were 51% lower than conventional broccoli, organic green peas were 18 % lower than conventional green peas. The organic radish yields were 36% lower than conventional yields and this was statically significant. The yield differences were statically significant between control and conventional cabbages (25%) and broccolis (68%). The results indicate that there is on average an initial 25% yield difference between organic and conventional farming systems. Similar studies have shown that the yield gap can be reduced within three to four years. This study presents preliminary results of trials that are to continue for ten years, during which time the yield differences may vary.
- Full Text:
- Date Issued: 2016
Absorptive capacity for responding to environmental: change an assessment of three public-sector agencies
- Authors: Mc Culloch, Samantha
- Date: 2016
- Subjects: Global environmental change Absorptive capacity (Economics)
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/11762 , vital:26966
- Description: In a time of global environmental instability, public-sector organisations that manage and protect natural resources, which are needed for human wellbeing, play an increasingly important role. These organisations frequently have to weigh up the costs and benefits of managing natural resources and their services for the public good. Management of social-ecological systems is commonly characterised by uncertainty, disagreement and trade-offs. In South Africa, these challenges are compounded by the fact that mandated organisations are often inadequately resourced in terms of finances, skilled staff and infrastructure. In order to maintain the resilience and robustness of social-ecological systems, public-sector organisations need to cultivate a set of dynamic capabilities, with strong emphasis on learning from their experiences and adapting their management strategies, to innovate and improve their performances. Absorptive capacity (AC) has been described as the ability of an organisation to recognise the value of new external information, acquire it and assimilate it within the organisation, transforming it by applying it with existing knowledge and exploiting the new knowledge for benefit. Organisations with good AC are able to recognise rapidly changing environments and address them by renewing and building on their levels of skill, knowledge and capability to deal with change. This construct has been extensively researched in industries related to business and technology, where its development has been found to stimulate innovative capabilities. There has, however, been little research into its relevance for public-sector organisations or organisations with environmental mandates. This study used methodological triangulation to assess the perceptions of employees on the current state of AC in three public-sector organisations with environmental mandates. This was done to gain insight into their capacity to absorb information and apply their new knowledge in decision-making, in a manner that navigates through environmental change. The key findings of this research suggest that knowledge transformation and exploitation are enhanced by in-house research capabilities and cross-functional interface between internal departments. These findings also suggest that the acquisition of knowledge is not only determined by the in-house research capacity but also depends on the resources available to these departments in terms of time, finances and skilled staff. There was minimal evidence of knowledge exploitation; however, obstacles that were highlighted as hindering this process included individual responsibility and motivation, as well as general organisation capacities, such as communication hierarchies, funding, time and organisational silos. This research found that the well-studied concept of AC can be used as an institutional mechanism to assess and promote adaptive capacity in public-sector organisations with environmental mandates to navigate and innovate through the Anthropocene.
- Full Text:
- Date Issued: 2016
- Authors: Mc Culloch, Samantha
- Date: 2016
- Subjects: Global environmental change Absorptive capacity (Economics)
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/11762 , vital:26966
- Description: In a time of global environmental instability, public-sector organisations that manage and protect natural resources, which are needed for human wellbeing, play an increasingly important role. These organisations frequently have to weigh up the costs and benefits of managing natural resources and their services for the public good. Management of social-ecological systems is commonly characterised by uncertainty, disagreement and trade-offs. In South Africa, these challenges are compounded by the fact that mandated organisations are often inadequately resourced in terms of finances, skilled staff and infrastructure. In order to maintain the resilience and robustness of social-ecological systems, public-sector organisations need to cultivate a set of dynamic capabilities, with strong emphasis on learning from their experiences and adapting their management strategies, to innovate and improve their performances. Absorptive capacity (AC) has been described as the ability of an organisation to recognise the value of new external information, acquire it and assimilate it within the organisation, transforming it by applying it with existing knowledge and exploiting the new knowledge for benefit. Organisations with good AC are able to recognise rapidly changing environments and address them by renewing and building on their levels of skill, knowledge and capability to deal with change. This construct has been extensively researched in industries related to business and technology, where its development has been found to stimulate innovative capabilities. There has, however, been little research into its relevance for public-sector organisations or organisations with environmental mandates. This study used methodological triangulation to assess the perceptions of employees on the current state of AC in three public-sector organisations with environmental mandates. This was done to gain insight into their capacity to absorb information and apply their new knowledge in decision-making, in a manner that navigates through environmental change. The key findings of this research suggest that knowledge transformation and exploitation are enhanced by in-house research capabilities and cross-functional interface between internal departments. These findings also suggest that the acquisition of knowledge is not only determined by the in-house research capacity but also depends on the resources available to these departments in terms of time, finances and skilled staff. There was minimal evidence of knowledge exploitation; however, obstacles that were highlighted as hindering this process included individual responsibility and motivation, as well as general organisation capacities, such as communication hierarchies, funding, time and organisational silos. This research found that the well-studied concept of AC can be used as an institutional mechanism to assess and promote adaptive capacity in public-sector organisations with environmental mandates to navigate and innovate through the Anthropocene.
- Full Text:
- Date Issued: 2016