Age of squid Loligo reynaudii d’Orbigny, 1845, and its possible use to test effectiveness of the closed season in protecting this resource
- Mwanangombe, Collette Habani
- Authors: Mwanangombe, Collette Habani
- Date: 2020
- Subjects: Loliginidae -- Spawning -- South Africa , Loliginidae -- Age determination , Loligo fisheries -- South Africa , Fishery management -- South Africa , Otoliths , Loliginidae – Eggs -- Incubation , Loliginidae – Growth , Fish stock assessment -- South Africa , Recruitment (Population biology) -- South Africa , Loligo reynaudii d’Orbigny
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/144333 , vital:38336
- Description: This study presents age distributions representing populations of adult Loligo reynaudii, together with the results of spawning and commercial catches to assist in understanding the beneficial role of the closed season. The results were based on 791 samples collected during three closed seasons (November: 2003, 2004 and 2005) and out of closed season during April/May 2005. Age and predicted growth were examined by counting daily rings on statolith microstructures. The age in days after hatching ranged from 168 to 484 days (71-425 mm) in males and from 125 to 478 days (83-263 mm) in females. Average age at spawning was found to be 323 days in males and 316 days in females. Population estimates of growth rates were best described by a linear growth model which revealed that males grew faster than females in length as they grew older with growth rate ranging between 0.63 to 0.83 mm per day for males and between 0.22 to 0.32 mm per day for females. Back-calculated hatch dates and later egg-laying events for parental populations were determined. Results from back calculated egg laying dates (presented as percentage of frequency of all laying dates) indicated a highest total of 36%, 39% and 15% of eggs from all samples were laid during the closed season and nine days after the closed season during year 2003, 2004 and 2005 respectively. Monthly commercial total catches (2002-2005) showed an increase from November soon after the fishery resumed, up until the month of January. Daily catches were highest in November (up to 290 tonnes) relative to the daily catches observed in December and January in all the years. Results led to the conclusion that the closed season (25 October to 22 November) is beneficial for both the chokka resource and the fishery. This is because: a) there is time for enough spawning biomass to accumulate, which subsequently results in high catches (good fishery), in the current year, best immediately after season opens in November; b) there is a link in the results between egg laying dates in the period of closed season and immediately afterwards, and the magnitude of catches in last nine days of November.
- Full Text:
- Date Issued: 2020
- Authors: Mwanangombe, Collette Habani
- Date: 2020
- Subjects: Loliginidae -- Spawning -- South Africa , Loliginidae -- Age determination , Loligo fisheries -- South Africa , Fishery management -- South Africa , Otoliths , Loliginidae – Eggs -- Incubation , Loliginidae – Growth , Fish stock assessment -- South Africa , Recruitment (Population biology) -- South Africa , Loligo reynaudii d’Orbigny
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/144333 , vital:38336
- Description: This study presents age distributions representing populations of adult Loligo reynaudii, together with the results of spawning and commercial catches to assist in understanding the beneficial role of the closed season. The results were based on 791 samples collected during three closed seasons (November: 2003, 2004 and 2005) and out of closed season during April/May 2005. Age and predicted growth were examined by counting daily rings on statolith microstructures. The age in days after hatching ranged from 168 to 484 days (71-425 mm) in males and from 125 to 478 days (83-263 mm) in females. Average age at spawning was found to be 323 days in males and 316 days in females. Population estimates of growth rates were best described by a linear growth model which revealed that males grew faster than females in length as they grew older with growth rate ranging between 0.63 to 0.83 mm per day for males and between 0.22 to 0.32 mm per day for females. Back-calculated hatch dates and later egg-laying events for parental populations were determined. Results from back calculated egg laying dates (presented as percentage of frequency of all laying dates) indicated a highest total of 36%, 39% and 15% of eggs from all samples were laid during the closed season and nine days after the closed season during year 2003, 2004 and 2005 respectively. Monthly commercial total catches (2002-2005) showed an increase from November soon after the fishery resumed, up until the month of January. Daily catches were highest in November (up to 290 tonnes) relative to the daily catches observed in December and January in all the years. Results led to the conclusion that the closed season (25 October to 22 November) is beneficial for both the chokka resource and the fishery. This is because: a) there is time for enough spawning biomass to accumulate, which subsequently results in high catches (good fishery), in the current year, best immediately after season opens in November; b) there is a link in the results between egg laying dates in the period of closed season and immediately afterwards, and the magnitude of catches in last nine days of November.
- Full Text:
- Date Issued: 2020
The effect of muscle type and freezing on the evolution of physico-chemical properties during processing of South African biltong and its final textural properties
- Authors: Ngwendu, Nwabisa
- Date: 2020
- Subjects: Biltong Meat -- Quality -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/12128 , vital:39154
- Description: The study investigated the effect of muscle type and freezing on evaluation of mass transfer during processing physico-chemical of South African biltong and its textural properties. In the first experimental phase of this study, mass transfers, physico-chemical and textural properties (hardness, cohesiveness, springiness, and chewiness) of commercially produced biltong from biceps femoris (BF) and semitendinosus (ST) (n=9) were measured. Biltong was dried at 30oC and 40% relative humidity until it had lost 50% of its initial weight. The initial moisture content, water activity (Aw) of BF muscles (74.3% and 0.992) were significantly lower compared those of ST muscles (75.4% and 0.994%). The fat content of BF (2.3%) muscles was higher (P<0.05) than in ST muscles (1.7%). The salt, weight and water gain for the BF muscle were 2.3%, -2.6% and -7.0% respectively and were significantly higher than those of ST muscles which were 2.1, -0.4 and -4.0, respectively. After drying, the moisture content, Aw, and pH were lower in BF (42.2, 0.886 and 5.29) than those of ST muscles (45.1, 0.911 and 5.42). The salt content was higher (P<0.05) in BF muscle than in ST. Among textural properties, hardness was significantly higher in biltong from the BF (233.0N), while the springiness was significantly lower compared to the ST muscle (178.2N). Therefore, it was concluded that the use of different muscles results in variation of biltong physicochemical characteristics. The second experiment investigated the effect of freezing and muscle type on mass transfers, lipid oxidation, physico-chemical and textural properties of biltong. In this experiment, the iii ST muscles were replaced with semimembranosus (SM) muscles. A total of 12 beef muscles were used, with six BF and six SM muscles frozen in a blast freezer at -40 oC till they reached -20oC; then they were transferred to -20oC for 14 days. The thawing loss for the BF and ST muscles was 1.3 and 2.4% respectively, but there were no significant (P>0.05) differences. The protein and salt content were significantly higher in frozen-thawed (24.3 and 0.13%) muscles than in fresh muscle (20.2 and 0.08%); whereas the fat content and pH were lower (P<0.05) in frozen-thawed (5.36) compared to fresh muscles (5.51). Between muscles, the moisture, salt content, and pH were higher in BF muscles than in SM muscles (73.2, 0.12% and 5.49). Aw was affected by the interaction between freezing and muscle type, with frozenthawed SM having lower Aw (0.990). During salting, salt, weight and water gain did not show any differences (P<0.05). There were no major significant differences after salting. There were lower TBARS and pH in frozen-thawed (1.5mgMDA/kg and 5.15) muscles than in fresh muscles (3.3mgMDA/kg and 5.19) as well as in SM muscles (1.8mgMDA/kg and 5.16) than in BF muscles (3.0mgMDA/kg and 5.19). The moisture was significantly lower in frozen-thawed SM (68.1%) than in fresh SM, BF and frozen-thawed BF (69.3,70.5 and 71.7%) after salting. On the final product, the interaction between muscle type and freezing affected the moisture content, TBARS, chewiness and the springiness of biltong, with the biltong from fresh SM (39.8%) having significantly lower moisture content compared frozenthawed BF and ST muscles as well fresh BF muscles (42.8% in average). The TBARS were higher in biltong from fresh BF muscles (5.1mgMDA/kg) compared to other muscles. Furthermore, the chewiness and springiness were higher (P<0.05) in biltong produced from SM frozen-thawed muscles (327.7N and 1.5). The WBSF was higher in biltong from the BF muscles (108.8N) than in the biltong from SM (80.1) but it was not affected by the freezing effect (P>0.05). Freezing did not show any major differences in biltong. iv The third experiment was conducted to determine the effect of freezing African buffalo carcasses on weight loss during salting, physico-chemical and textural properties of biltong. Five muscles (ST, SM, BF, LTL, and RF) were randomly selected from 30 carcasses (15 frozen-thawed and 15 fresh), cut along the grain, traditionally salted and dried at 26oC till they lost 45-50% of their initial weight. The salting weight loss was higher in frozen-thawed muscles (-1.45%) than in fresh muscles (-0.89%). The freezing treatment affected the physico-chemical properties of the biltong. The biltong produced from frozen-thawed muscles showed significantly higher protein and ash (47.6 and 7.6%) compared to fresh (43.9 and 7.1); whereas the moisture, fat, pH and Aw were lower (43.7, 2.1, 0.870 and 5.30, respectively) compared to those of biltong from fresh muscles (45.5%, 2.9%, 0.890 and 5.38). The moisture, pH and fat content were further affected by muscle type. The interactive effect was observed in salt content, with RF frozen-thawed showing higher salt content (8.2%) compared to all other muscles. The hardness and WBSF were significantly higher (P<0.05) in biltong frozen-thawed (204.1N and 135.0N) than in fresh muscles (146.2N and 113.1N). Moreover, the chewiness and springiness were affected (P<0.05) by muscle type, with RF muscle having higher springiness 0.89 and chewiness 171.1N than all the other muscles. Therefore, it can be concluded that freezing buffalo carcasses significantly influenced the quality characteristics of biltong. The fourth experiment studied the effect of drying methods on physico-chemical properties of traditional biltong produced from African buffalo muscles. The BF and SM muscles were randomly selected from 15 fresh carcasses, cut into strips, salted and divided into two batches per muscle. The first batch of each muscle type was dried in the ambient-air drier at 22oC average and the second batch in the cabinet drier at 26 oC till 45-50% weight loss. No differences (P>0.05) were observed in salting weight loss between the drying method and muscle type. The protein content was significantly higher in SM (46%) muscles compared to v BF (43%) but there was no effect (P>0.05) caused by the drying method. The interactions between the muscle type and drying method affected the fat content, with biltong from airdried BF muscles having significant lower (2.1%) fat content. There were no significant differences in other physico-chemical properties of biltong, with moisture content, salt, ash content, Aw and pH being 45.0%, 5.13%, 44.8%, 7.3%, 2.7%, 0.885 and 5.61 on average, respectively. Overall, the findings of the study show that freezing does have a significant effect on the final quality of biltong. However, it can be concluded that a significant effect on the physico-chemical properties of biltong depends on the changes of mass transfers during salting and drying.
- Full Text:
- Date Issued: 2020
- Authors: Ngwendu, Nwabisa
- Date: 2020
- Subjects: Biltong Meat -- Quality -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/12128 , vital:39154
- Description: The study investigated the effect of muscle type and freezing on evaluation of mass transfer during processing physico-chemical of South African biltong and its textural properties. In the first experimental phase of this study, mass transfers, physico-chemical and textural properties (hardness, cohesiveness, springiness, and chewiness) of commercially produced biltong from biceps femoris (BF) and semitendinosus (ST) (n=9) were measured. Biltong was dried at 30oC and 40% relative humidity until it had lost 50% of its initial weight. The initial moisture content, water activity (Aw) of BF muscles (74.3% and 0.992) were significantly lower compared those of ST muscles (75.4% and 0.994%). The fat content of BF (2.3%) muscles was higher (P<0.05) than in ST muscles (1.7%). The salt, weight and water gain for the BF muscle were 2.3%, -2.6% and -7.0% respectively and were significantly higher than those of ST muscles which were 2.1, -0.4 and -4.0, respectively. After drying, the moisture content, Aw, and pH were lower in BF (42.2, 0.886 and 5.29) than those of ST muscles (45.1, 0.911 and 5.42). The salt content was higher (P<0.05) in BF muscle than in ST. Among textural properties, hardness was significantly higher in biltong from the BF (233.0N), while the springiness was significantly lower compared to the ST muscle (178.2N). Therefore, it was concluded that the use of different muscles results in variation of biltong physicochemical characteristics. The second experiment investigated the effect of freezing and muscle type on mass transfers, lipid oxidation, physico-chemical and textural properties of biltong. In this experiment, the iii ST muscles were replaced with semimembranosus (SM) muscles. A total of 12 beef muscles were used, with six BF and six SM muscles frozen in a blast freezer at -40 oC till they reached -20oC; then they were transferred to -20oC for 14 days. The thawing loss for the BF and ST muscles was 1.3 and 2.4% respectively, but there were no significant (P>0.05) differences. The protein and salt content were significantly higher in frozen-thawed (24.3 and 0.13%) muscles than in fresh muscle (20.2 and 0.08%); whereas the fat content and pH were lower (P<0.05) in frozen-thawed (5.36) compared to fresh muscles (5.51). Between muscles, the moisture, salt content, and pH were higher in BF muscles than in SM muscles (73.2, 0.12% and 5.49). Aw was affected by the interaction between freezing and muscle type, with frozenthawed SM having lower Aw (0.990). During salting, salt, weight and water gain did not show any differences (P<0.05). There were no major significant differences after salting. There were lower TBARS and pH in frozen-thawed (1.5mgMDA/kg and 5.15) muscles than in fresh muscles (3.3mgMDA/kg and 5.19) as well as in SM muscles (1.8mgMDA/kg and 5.16) than in BF muscles (3.0mgMDA/kg and 5.19). The moisture was significantly lower in frozen-thawed SM (68.1%) than in fresh SM, BF and frozen-thawed BF (69.3,70.5 and 71.7%) after salting. On the final product, the interaction between muscle type and freezing affected the moisture content, TBARS, chewiness and the springiness of biltong, with the biltong from fresh SM (39.8%) having significantly lower moisture content compared frozenthawed BF and ST muscles as well fresh BF muscles (42.8% in average). The TBARS were higher in biltong from fresh BF muscles (5.1mgMDA/kg) compared to other muscles. Furthermore, the chewiness and springiness were higher (P<0.05) in biltong produced from SM frozen-thawed muscles (327.7N and 1.5). The WBSF was higher in biltong from the BF muscles (108.8N) than in the biltong from SM (80.1) but it was not affected by the freezing effect (P>0.05). Freezing did not show any major differences in biltong. iv The third experiment was conducted to determine the effect of freezing African buffalo carcasses on weight loss during salting, physico-chemical and textural properties of biltong. Five muscles (ST, SM, BF, LTL, and RF) were randomly selected from 30 carcasses (15 frozen-thawed and 15 fresh), cut along the grain, traditionally salted and dried at 26oC till they lost 45-50% of their initial weight. The salting weight loss was higher in frozen-thawed muscles (-1.45%) than in fresh muscles (-0.89%). The freezing treatment affected the physico-chemical properties of the biltong. The biltong produced from frozen-thawed muscles showed significantly higher protein and ash (47.6 and 7.6%) compared to fresh (43.9 and 7.1); whereas the moisture, fat, pH and Aw were lower (43.7, 2.1, 0.870 and 5.30, respectively) compared to those of biltong from fresh muscles (45.5%, 2.9%, 0.890 and 5.38). The moisture, pH and fat content were further affected by muscle type. The interactive effect was observed in salt content, with RF frozen-thawed showing higher salt content (8.2%) compared to all other muscles. The hardness and WBSF were significantly higher (P<0.05) in biltong frozen-thawed (204.1N and 135.0N) than in fresh muscles (146.2N and 113.1N). Moreover, the chewiness and springiness were affected (P<0.05) by muscle type, with RF muscle having higher springiness 0.89 and chewiness 171.1N than all the other muscles. Therefore, it can be concluded that freezing buffalo carcasses significantly influenced the quality characteristics of biltong. The fourth experiment studied the effect of drying methods on physico-chemical properties of traditional biltong produced from African buffalo muscles. The BF and SM muscles were randomly selected from 15 fresh carcasses, cut into strips, salted and divided into two batches per muscle. The first batch of each muscle type was dried in the ambient-air drier at 22oC average and the second batch in the cabinet drier at 26 oC till 45-50% weight loss. No differences (P>0.05) were observed in salting weight loss between the drying method and muscle type. The protein content was significantly higher in SM (46%) muscles compared to v BF (43%) but there was no effect (P>0.05) caused by the drying method. The interactions between the muscle type and drying method affected the fat content, with biltong from airdried BF muscles having significant lower (2.1%) fat content. There were no significant differences in other physico-chemical properties of biltong, with moisture content, salt, ash content, Aw and pH being 45.0%, 5.13%, 44.8%, 7.3%, 2.7%, 0.885 and 5.61 on average, respectively. Overall, the findings of the study show that freezing does have a significant effect on the final quality of biltong. However, it can be concluded that a significant effect on the physico-chemical properties of biltong depends on the changes of mass transfers during salting and drying.
- Full Text:
- Date Issued: 2020
Older people’s perspectives on the effectiveness of eye movement integration (emi) therapy as treatment intervention for their trauma symptoms
- Authors: Visagie, Andrea
- Date: 2020
- Subjects: Post-traumatic stress disorder in old age
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/46389 , vital:39601
- Description: Many research studies propose that we have an ageing population with an increased number of people living past the age of 85 years. Ageing is accompanied by a gradual decline in physical, mental and sensory abilities. Older people may have experienced trauma throughout their lives, and very often, their symptoms of trauma are regarded as part of the ageing process rather than actual symptoms of trauma. In addition, older people often do not seek help throughout their lives for various reasons. While there is research available about older people and trauma, little is known about Eye Movement Integration(EMI)therapy as a treatment intervention in treating symptoms of trauma in older persons. The purpose of this research was an explorative and descriptive study of older people’s responses to EMI therapy as a treatment intervention for their symptoms of trauma. More specifically, the study was designed to determine how older people process their symptoms through EMI therapy and whether they view it as valuable. This qualitative study used an exploratory-descriptive research design with a non-probability, purposive sampling method. The EMI therapy sessions were offered to older adults in the Knysna area who presented with symptoms of trauma. From this group, only those who were able and willing to engage in therapeutic interviews formed part of the research. As part of the study, they consented to the use of their inventories from the EMI sessions as a qualitative document analysis and taking part in qualitative interviews to explore their views on the usefulness of EMI therapy to deal with their trauma. The findings emphasise that older people are not familiar with EMI. However, they view their experience of it in a positive light and regard it as a useful treatment intervention for treating their symptoms. Moreover, EMI seems to be a brief and cost-effective trauma intervention with practical benefits for older adults. The results from this study can assist social work professionals, specifically those working with older people, to address and improve the overall health and emotional wellbeing of older people. Data verification methods ensured the validity of this study
- Full Text:
- Date Issued: 2020
- Authors: Visagie, Andrea
- Date: 2020
- Subjects: Post-traumatic stress disorder in old age
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/46389 , vital:39601
- Description: Many research studies propose that we have an ageing population with an increased number of people living past the age of 85 years. Ageing is accompanied by a gradual decline in physical, mental and sensory abilities. Older people may have experienced trauma throughout their lives, and very often, their symptoms of trauma are regarded as part of the ageing process rather than actual symptoms of trauma. In addition, older people often do not seek help throughout their lives for various reasons. While there is research available about older people and trauma, little is known about Eye Movement Integration(EMI)therapy as a treatment intervention in treating symptoms of trauma in older persons. The purpose of this research was an explorative and descriptive study of older people’s responses to EMI therapy as a treatment intervention for their symptoms of trauma. More specifically, the study was designed to determine how older people process their symptoms through EMI therapy and whether they view it as valuable. This qualitative study used an exploratory-descriptive research design with a non-probability, purposive sampling method. The EMI therapy sessions were offered to older adults in the Knysna area who presented with symptoms of trauma. From this group, only those who were able and willing to engage in therapeutic interviews formed part of the research. As part of the study, they consented to the use of their inventories from the EMI sessions as a qualitative document analysis and taking part in qualitative interviews to explore their views on the usefulness of EMI therapy to deal with their trauma. The findings emphasise that older people are not familiar with EMI. However, they view their experience of it in a positive light and regard it as a useful treatment intervention for treating their symptoms. Moreover, EMI seems to be a brief and cost-effective trauma intervention with practical benefits for older adults. The results from this study can assist social work professionals, specifically those working with older people, to address and improve the overall health and emotional wellbeing of older people. Data verification methods ensured the validity of this study
- Full Text:
- Date Issued: 2020
An Analysis of Internet Background Radiation within an African IPv4 netblock
- Authors: Hendricks, Wadeegh
- Date: 2020
- Subjects: Computer networks -- Monitoring –- South Africa , Dark Web , Computer networks -- Security measures –- South Africa , Universities and Colleges -- Computer networks -- Security measures , Malware (Computer software) , TCP/IP (Computer network protocol)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/103791 , vital:32298
- Description: The use of passive network sensors has in the past proven to be quite effective in monitoring and analysing the current state of traffic on a network. Internet traffic destined to a routable, yet unused address block is often referred to as Internet Background Radiation (IBR) and characterised as unsolicited. This unsolicited traffic is however quite valuable to researchers in that it allows them to study the traffic patterns in a covert manner. IBR is largely composed of network and port scanning traffic, backscatter packets from virus and malware activity and to a lesser extent, misconfiguration of network devices. This research answers the following two questions: (1) What is the current state of IBR within the context of a South African IP address space and (2) Can any anomalies be detected in the traffic, with specific reference to current global malware attacks such as Mirai and similar. Rhodes University operates five IPv4 passive network sensors, commonly known as network telescopes, each monitoring its own /24 IP address block. The oldest of these network telescopes has been collecting traffic for over a decade, with the newest being established in 2011. This research focuses on the in-depth analysis of the traffic captured by one telescope in the 155/8 range over a 12 month period, from January to December 2017. The traffic was analysed and classified according the protocol, TCP flag, source IP address, destination port, packet count and payload size. Apart from the normal network traffic graphs and tables, a geographic heatmap of source traffic was also created, based on the source IP address. Spikes and noticeable variances in traffic patterns were further investigated and evidence of Mirai like malware activity was observed. Network and port scanning were found to comprise the largest amount of traffic, accounting for over 90% of the total IBR. Various scanning techniques were identified, including low level passive scanning and much higher level active scanning.
- Full Text:
- Date Issued: 2020
- Authors: Hendricks, Wadeegh
- Date: 2020
- Subjects: Computer networks -- Monitoring –- South Africa , Dark Web , Computer networks -- Security measures –- South Africa , Universities and Colleges -- Computer networks -- Security measures , Malware (Computer software) , TCP/IP (Computer network protocol)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/103791 , vital:32298
- Description: The use of passive network sensors has in the past proven to be quite effective in monitoring and analysing the current state of traffic on a network. Internet traffic destined to a routable, yet unused address block is often referred to as Internet Background Radiation (IBR) and characterised as unsolicited. This unsolicited traffic is however quite valuable to researchers in that it allows them to study the traffic patterns in a covert manner. IBR is largely composed of network and port scanning traffic, backscatter packets from virus and malware activity and to a lesser extent, misconfiguration of network devices. This research answers the following two questions: (1) What is the current state of IBR within the context of a South African IP address space and (2) Can any anomalies be detected in the traffic, with specific reference to current global malware attacks such as Mirai and similar. Rhodes University operates five IPv4 passive network sensors, commonly known as network telescopes, each monitoring its own /24 IP address block. The oldest of these network telescopes has been collecting traffic for over a decade, with the newest being established in 2011. This research focuses on the in-depth analysis of the traffic captured by one telescope in the 155/8 range over a 12 month period, from January to December 2017. The traffic was analysed and classified according the protocol, TCP flag, source IP address, destination port, packet count and payload size. Apart from the normal network traffic graphs and tables, a geographic heatmap of source traffic was also created, based on the source IP address. Spikes and noticeable variances in traffic patterns were further investigated and evidence of Mirai like malware activity was observed. Network and port scanning were found to comprise the largest amount of traffic, accounting for over 90% of the total IBR. Various scanning techniques were identified, including low level passive scanning and much higher level active scanning.
- Full Text:
- Date Issued: 2020
The workload of flight attendants during short-haul flight operations: a system analysis
- Authors: Bennett, Chloe Kayla
- Date: 2020
- Subjects: Flight attendants -- Health and hygiene , Employees -- South Africa -- Workload
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/123431 , vital:35437
- Description: Background and aim: Flight attendants forms a significant part in 24-hour aviation industry. Flight attendant fatigue is a significant problem in the aviation industry as it continues to jeopardize the ability to fulfil important safety and security roles which is critical in performance duty of a flight attendant. However, little attention has been accomplished to the workload, working conditions and fatigue of flight attendants crew in transport aircraft. In addition, there is currently less research that have also embraced the problematic of smaller regional/commercial operation (short-haul flight operations) inducing fatigue among short-haul flight attendants as the nature of this operation are often characterised with high productivity expectations in a demanding environment with high time pressures resulting in high workloads and fatigue. Thus, flight attendant fatigue and workload is a worldwide challenge in this operational environment and less attention has been given to the determining factors. Therefore, the aim of the study was to determine the workload factors contributing to flight attendant fatigue during short-haul flight operations. Methods (System analysis): To achieve the research aim, the work system analysis, based on the Smith and Carayon-Sainfort model was chosen as the main research approach which was conducted in two ways; based on existing literature and secondly based on expert interviews. This method provided a systemic aspect to understand the whole work system of flight attendants work during short-haul operations in order to identify all the contributing factors to flight attendant fatigue and workload. Results: The literature analysis and the data from the expert interviews highlighted significant findings to flight attendant fatigue and workload. The reasons for flight attendant fatigue operating short-haul flights can be found at organizational, task, individual, environmental levels and tools and technologies and due to the interaction of the factors. The main factors of flight attendants’ fatigue are thought primarily as a function of scheduling due to irregular, mixed schedules with early starts and late finishes, extended duty days (long working hours), as well as high workload, due to the short turnaround flights, the number of sectors flown in a single duty period and duty length and high jobs demands. In addition, flight duty and rest regulations, confined work space in the cabin, vibrations, noise and lighting, sleeping in an unfamiliar environment, family responsibilities all add to additional stress placed on the body which can influence workload and sleep and consequently influencing fatigue. Conclusion: Overall the study determined that flight attendant fatigue is a significant problem in modern industry of short-haul operations. Using this systematic approach (work system analysis based on the framework of the work system model developed by Smith and Carayon-Sainfort (1989) allowed for an accurate representation of the complexity of flight attendant work environment in short-haul aviation industries, thus contributed to an increased understanding of fatigue and risk factors that span the entire work system and aid in identifying the patterns in combination of work system variables that are associated with increased risk to flight attendant fatigue. Overall flight attendant fatigue is a product of interactions with the short-haul environment. It can have a negative impact on safety, performance and well-being. Therefore, it needs to be managed and dealt with in the near future.
- Full Text:
- Date Issued: 2020
- Authors: Bennett, Chloe Kayla
- Date: 2020
- Subjects: Flight attendants -- Health and hygiene , Employees -- South Africa -- Workload
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/123431 , vital:35437
- Description: Background and aim: Flight attendants forms a significant part in 24-hour aviation industry. Flight attendant fatigue is a significant problem in the aviation industry as it continues to jeopardize the ability to fulfil important safety and security roles which is critical in performance duty of a flight attendant. However, little attention has been accomplished to the workload, working conditions and fatigue of flight attendants crew in transport aircraft. In addition, there is currently less research that have also embraced the problematic of smaller regional/commercial operation (short-haul flight operations) inducing fatigue among short-haul flight attendants as the nature of this operation are often characterised with high productivity expectations in a demanding environment with high time pressures resulting in high workloads and fatigue. Thus, flight attendant fatigue and workload is a worldwide challenge in this operational environment and less attention has been given to the determining factors. Therefore, the aim of the study was to determine the workload factors contributing to flight attendant fatigue during short-haul flight operations. Methods (System analysis): To achieve the research aim, the work system analysis, based on the Smith and Carayon-Sainfort model was chosen as the main research approach which was conducted in two ways; based on existing literature and secondly based on expert interviews. This method provided a systemic aspect to understand the whole work system of flight attendants work during short-haul operations in order to identify all the contributing factors to flight attendant fatigue and workload. Results: The literature analysis and the data from the expert interviews highlighted significant findings to flight attendant fatigue and workload. The reasons for flight attendant fatigue operating short-haul flights can be found at organizational, task, individual, environmental levels and tools and technologies and due to the interaction of the factors. The main factors of flight attendants’ fatigue are thought primarily as a function of scheduling due to irregular, mixed schedules with early starts and late finishes, extended duty days (long working hours), as well as high workload, due to the short turnaround flights, the number of sectors flown in a single duty period and duty length and high jobs demands. In addition, flight duty and rest regulations, confined work space in the cabin, vibrations, noise and lighting, sleeping in an unfamiliar environment, family responsibilities all add to additional stress placed on the body which can influence workload and sleep and consequently influencing fatigue. Conclusion: Overall the study determined that flight attendant fatigue is a significant problem in modern industry of short-haul operations. Using this systematic approach (work system analysis based on the framework of the work system model developed by Smith and Carayon-Sainfort (1989) allowed for an accurate representation of the complexity of flight attendant work environment in short-haul aviation industries, thus contributed to an increased understanding of fatigue and risk factors that span the entire work system and aid in identifying the patterns in combination of work system variables that are associated with increased risk to flight attendant fatigue. Overall flight attendant fatigue is a product of interactions with the short-haul environment. It can have a negative impact on safety, performance and well-being. Therefore, it needs to be managed and dealt with in the near future.
- Full Text:
- Date Issued: 2020
Flammability of indigenous and invasive alien woody plants in coastal fynbos and thicket
- Msweli, Samukelisiwe Tholakele, Potts, Alastair J
- Authors: Msweli, Samukelisiwe Tholakele , Potts, Alastair J
- Date: 2020
- Subjects: Forest fires -- Environmental aspects , Forest fires -- Prevention and control
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/45875 , vital:39313
- Description: Globally, extreme fires have become more common in wildland-urban interface areas, and more recently, along the southern Cape coast of South Africa. The 2017 Knysna fires prompted greater understanding of the flammability of, and the fire risk posed by, different vegetation groups, which is essential to develop fire risk mitigation strategies. In this study, I experimentally assessed flammability of 30 woody plant species from the vegetation groups indigenous fynbos, thicket, and invasive alien plants (IAPs) that occur along the southern Cape coast. Live plant shoots were sampled across varying fire weather conditions and burnt experimentally to measure flammability in relation to fire weather conditions, fuel moisture, and fuel load. Flammability measures considered were: burn intensity, completeness of burn, time-to-ignition, and the likelihood of spontaneous ignition. I further assessed the flammability of partially dried plant material as a crude proxy for drought effects, to ascertain whether drying of fuels would differentially affect the flammability of the vegetation groups. I used generalized linear mixed-effects models to assess flammability measures in relation to the predictor variables: fire weather, fuel moisture, fuel load, vegetation groups, and species (as a random factor). Results showed that increasing severity of fire weather significantly increased flammability through increasing burn intensity, increasing completeness of burn, increasing the likelihood of spontaneous ignition, and also reducing time-to-ignition. Increasing fuel moisture significantly decreased burn intensity, completeness of burn, and the likelihood of spontaneous ignition. Fuel load significantly increased burn intensity and time-to-ignition. Flammability was highest in IAPs, intermediate in fynbos, and lowest in thicket. IAPs and fynbos showed significantly higher ignitability, and thus present risks under moderate and high fire weather conditions, whereas thicket presents lower risks under low and moderate fire weather conditions. The drying out of fuels considerably increased flammability equally in the three vegetation groups, and by implication, fire risk due to an increase in dead:live ratio. Flammability was furthermore assessed in relation to fuel traits, i.e. the proportion of fine fuels, coarse fuels, and dead fuels, fuel bed porosity, fuel load, and fuel moisture, using multiple regression analysis and stepwise selection of factors. This revealed that fuel moisture was the most important factor affecting flammability in terms of all the flammability measures. Results further showed that the increase in v the proportions of fine fuels increased flammability by increasing completeness of burn. Lastly, vegetation groups were compared (using Kruskal Wallis) in terms of their flammability and fuel traits. I found that fynbos and IAPs exhibited greater flammability on account of higher completeness of burn and more rapid ignition than thicket species, but no clear distinction was evident between fynbos and IAPs. Fynbos’ high flammability was attributed to high proportions of fine and porous fuels. Thicket’s low flammability was attributed to high proportions of coarse and dense fuels. Little distinction in fuel traits could be made between fynbos and IAPs, except that fynbos had a greater proportion of fine fuels. There is a potential risk posed by the IAPs in terms of increased flammability and fire severity, on an indigenous landscape that is invaded. Fire managers need to encourage the prioritization of the management of IAPs that present high flammability as an attempt to reduce fire risk along the southern Cape coast of South Africa.
- Full Text:
- Date Issued: 2020
- Authors: Msweli, Samukelisiwe Tholakele , Potts, Alastair J
- Date: 2020
- Subjects: Forest fires -- Environmental aspects , Forest fires -- Prevention and control
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/45875 , vital:39313
- Description: Globally, extreme fires have become more common in wildland-urban interface areas, and more recently, along the southern Cape coast of South Africa. The 2017 Knysna fires prompted greater understanding of the flammability of, and the fire risk posed by, different vegetation groups, which is essential to develop fire risk mitigation strategies. In this study, I experimentally assessed flammability of 30 woody plant species from the vegetation groups indigenous fynbos, thicket, and invasive alien plants (IAPs) that occur along the southern Cape coast. Live plant shoots were sampled across varying fire weather conditions and burnt experimentally to measure flammability in relation to fire weather conditions, fuel moisture, and fuel load. Flammability measures considered were: burn intensity, completeness of burn, time-to-ignition, and the likelihood of spontaneous ignition. I further assessed the flammability of partially dried plant material as a crude proxy for drought effects, to ascertain whether drying of fuels would differentially affect the flammability of the vegetation groups. I used generalized linear mixed-effects models to assess flammability measures in relation to the predictor variables: fire weather, fuel moisture, fuel load, vegetation groups, and species (as a random factor). Results showed that increasing severity of fire weather significantly increased flammability through increasing burn intensity, increasing completeness of burn, increasing the likelihood of spontaneous ignition, and also reducing time-to-ignition. Increasing fuel moisture significantly decreased burn intensity, completeness of burn, and the likelihood of spontaneous ignition. Fuel load significantly increased burn intensity and time-to-ignition. Flammability was highest in IAPs, intermediate in fynbos, and lowest in thicket. IAPs and fynbos showed significantly higher ignitability, and thus present risks under moderate and high fire weather conditions, whereas thicket presents lower risks under low and moderate fire weather conditions. The drying out of fuels considerably increased flammability equally in the three vegetation groups, and by implication, fire risk due to an increase in dead:live ratio. Flammability was furthermore assessed in relation to fuel traits, i.e. the proportion of fine fuels, coarse fuels, and dead fuels, fuel bed porosity, fuel load, and fuel moisture, using multiple regression analysis and stepwise selection of factors. This revealed that fuel moisture was the most important factor affecting flammability in terms of all the flammability measures. Results further showed that the increase in v the proportions of fine fuels increased flammability by increasing completeness of burn. Lastly, vegetation groups were compared (using Kruskal Wallis) in terms of their flammability and fuel traits. I found that fynbos and IAPs exhibited greater flammability on account of higher completeness of burn and more rapid ignition than thicket species, but no clear distinction was evident between fynbos and IAPs. Fynbos’ high flammability was attributed to high proportions of fine and porous fuels. Thicket’s low flammability was attributed to high proportions of coarse and dense fuels. Little distinction in fuel traits could be made between fynbos and IAPs, except that fynbos had a greater proportion of fine fuels. There is a potential risk posed by the IAPs in terms of increased flammability and fire severity, on an indigenous landscape that is invaded. Fire managers need to encourage the prioritization of the management of IAPs that present high flammability as an attempt to reduce fire risk along the southern Cape coast of South Africa.
- Full Text:
- Date Issued: 2020
Analysis of bacterial Mur amide ligase enzymes for the identification of inhibitory compounds by in silico methods
- Chamboko, Chiratidzo Respina
- Authors: Chamboko, Chiratidzo Respina
- Date: 2020
- Subjects: Mur amide ligases , Ligases , Ligand binding (Biochemistry) , Antibacterial agents
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/163430 , vital:41036
- Description: An increased emergence of resistant pathogenic bacterial strains over the years has resulted in many people dying of untreatable infections. This has become one of the most critical global public health problems, as resistant strains are complicating treatment of infectious diseases, increasing human morbidity, mortality, and health care costs. A very limited amount of effective antibiotics is currently available, but the development of novel classes of antibacterial agents is becoming a priority. Mur amide ligases are enzymes that have been identified as potentially good targets for antibiotics, as they are uniquely found in bacteria. They are responsible for the formation of peptide bonds in a growing peptidoglycan structure for bacterial cell walls. The current work presented here focused on characterizing these Mur amide ligase enzymes and obtaining inhibitory compounds that could potentially be of use in drug discovery of antibacterial agents. To do this, multiple sequence alignment, motif analysis and phylogenetic tree constructions were carried out, followed by docking studies and molecular dynamic simulations. Prior to docking, homology modelling of missing residues in the MurF structure (PDB 1GG4) was performed. Characterization results revealed the Mur amide ligase enzymes contained defined conservation in limited regions, that ultimately mapped towards the central domain responsible for ATP binding (presence of a conserved GKT motif). Further analysis of results further unraveled the unique patterns observed within each group of the family of enzymes. As a result of these findings, docking studies were carried out on each Mur amide ligase structure. At most, two ligands were identified to be sufficiently inhibiting each Mur amide ligase. The ligands obtained were SANC00574 and SANC00575 for MurC, SANC00290 and SANC00438 for MurD, SANC00290 and SANC00525 for MurE and SANC00290 and SANC00434 for MurF. The two best ligands identified for each enzyme had docked in the active site of their respective proteins, passed Lipinski’s rule of five and had substantially low binding energies. Molecular dynamic simulations were then performed to analyze the behavior of the proteins and protein-ligand complexes, to confirm the lead compounds as good inhibitors of the Mur amide ligases. In the case of MurC, MurD and MurE complexes, the identified ligands clearly impacted the behavior of the protein, as the ligand bound proteins became more compact and stable, while flexibility decreased. There was however an opposite effect on MurF complexes, that resulted in identified inhibitors being discarded. As a potential next step, in vivo and in vitro experiments can be performed with identified ligands from this research, to further support the information presented.
- Full Text:
- Date Issued: 2020
- Authors: Chamboko, Chiratidzo Respina
- Date: 2020
- Subjects: Mur amide ligases , Ligases , Ligand binding (Biochemistry) , Antibacterial agents
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/163430 , vital:41036
- Description: An increased emergence of resistant pathogenic bacterial strains over the years has resulted in many people dying of untreatable infections. This has become one of the most critical global public health problems, as resistant strains are complicating treatment of infectious diseases, increasing human morbidity, mortality, and health care costs. A very limited amount of effective antibiotics is currently available, but the development of novel classes of antibacterial agents is becoming a priority. Mur amide ligases are enzymes that have been identified as potentially good targets for antibiotics, as they are uniquely found in bacteria. They are responsible for the formation of peptide bonds in a growing peptidoglycan structure for bacterial cell walls. The current work presented here focused on characterizing these Mur amide ligase enzymes and obtaining inhibitory compounds that could potentially be of use in drug discovery of antibacterial agents. To do this, multiple sequence alignment, motif analysis and phylogenetic tree constructions were carried out, followed by docking studies and molecular dynamic simulations. Prior to docking, homology modelling of missing residues in the MurF structure (PDB 1GG4) was performed. Characterization results revealed the Mur amide ligase enzymes contained defined conservation in limited regions, that ultimately mapped towards the central domain responsible for ATP binding (presence of a conserved GKT motif). Further analysis of results further unraveled the unique patterns observed within each group of the family of enzymes. As a result of these findings, docking studies were carried out on each Mur amide ligase structure. At most, two ligands were identified to be sufficiently inhibiting each Mur amide ligase. The ligands obtained were SANC00574 and SANC00575 for MurC, SANC00290 and SANC00438 for MurD, SANC00290 and SANC00525 for MurE and SANC00290 and SANC00434 for MurF. The two best ligands identified for each enzyme had docked in the active site of their respective proteins, passed Lipinski’s rule of five and had substantially low binding energies. Molecular dynamic simulations were then performed to analyze the behavior of the proteins and protein-ligand complexes, to confirm the lead compounds as good inhibitors of the Mur amide ligases. In the case of MurC, MurD and MurE complexes, the identified ligands clearly impacted the behavior of the protein, as the ligand bound proteins became more compact and stable, while flexibility decreased. There was however an opposite effect on MurF complexes, that resulted in identified inhibitors being discarded. As a potential next step, in vivo and in vitro experiments can be performed with identified ligands from this research, to further support the information presented.
- Full Text:
- Date Issued: 2020
The effects of elevated atmospheric CO2 on the biological control of invasive aquatic weeds in South Africa
- Authors: Baso, Nompumelelo Catherine
- Date: 2020
- Subjects: Aquatic weeds -- Biological control -- South Africa , Plants -- Effect of atmospheric carbon dioxide on , Atmospheric carbon dioxide -- Environmental aspects
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/140772 , vital:37917
- Description: There has been a rapid increase in atmospheric CO2 concentration, from pre-industrial values of 280 ppm to more than 400 ppm currently, and this is expected to more than double by the end of the 21st century. Studies have shown that plants grown above 600 ppm tend to have an increased growth rate and invest more in carbon-based defences. This has important implications for the management of invasive alien plants, especially for the field of biological control which is mostly dependent on herbivorous insects. This is because insects reared on such plants have been shown to have reduced overall fitness. Nevertheless, most of the studies on potential changes in plant-insect interactions under elevated CO2 are based on agricultural systems, with only a limited number of these types of studies conducted on alien invasive weeds. However, climate change and invasive species are two of the most prevalent features of global environmental change. Therefore, this also warrants active research and experimental studies to better understand how these systems will be affected by future climates. Thus, the aim of this study was to investigate the effects of elevated atmospheric CO2 on the biological control of four invasive aquatic weeds (Azolla filiculoides, Salvinia molesta, Pistia stratiotes, and Myriophyllum aquaticum). These species are a threat to natural resources in South Africa but are currently under successful control by their biological control agents (Stenopelmus rufinasus, Cyrtobagous salviniae, Neohydronomus affinis, and Lysathia n. sp.). To achieve this, the selected plant species were grown in a three-factor experimental design in winter (CO2 X nutrients X herbivory), and another two-factorial design in summer (CO2 X herbivory). Atmospheric CO2 concentrations were set at ambient (400 ppm) or elevated (800 ppm), as per the predictions of the IPCC. As per my hypothesis, the results suggest that these species will become more challenging in future due to increased biomass production, asexual reproduction and a higher C: N ratio which is evident under high CO2 concentrations. Although the biological control agents were in some instances able to reduce this CO2 fertilisation effect, their efficacy was significantly reduced compared with the levels of control observed at ambient CO2. These results suggest that additional biological control agents and other management methods may be needed for continued control of these invasive macrophytes, both in South Africa and further afield where they are problematic.
- Full Text:
- Date Issued: 2020
- Authors: Baso, Nompumelelo Catherine
- Date: 2020
- Subjects: Aquatic weeds -- Biological control -- South Africa , Plants -- Effect of atmospheric carbon dioxide on , Atmospheric carbon dioxide -- Environmental aspects
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/140772 , vital:37917
- Description: There has been a rapid increase in atmospheric CO2 concentration, from pre-industrial values of 280 ppm to more than 400 ppm currently, and this is expected to more than double by the end of the 21st century. Studies have shown that plants grown above 600 ppm tend to have an increased growth rate and invest more in carbon-based defences. This has important implications for the management of invasive alien plants, especially for the field of biological control which is mostly dependent on herbivorous insects. This is because insects reared on such plants have been shown to have reduced overall fitness. Nevertheless, most of the studies on potential changes in plant-insect interactions under elevated CO2 are based on agricultural systems, with only a limited number of these types of studies conducted on alien invasive weeds. However, climate change and invasive species are two of the most prevalent features of global environmental change. Therefore, this also warrants active research and experimental studies to better understand how these systems will be affected by future climates. Thus, the aim of this study was to investigate the effects of elevated atmospheric CO2 on the biological control of four invasive aquatic weeds (Azolla filiculoides, Salvinia molesta, Pistia stratiotes, and Myriophyllum aquaticum). These species are a threat to natural resources in South Africa but are currently under successful control by their biological control agents (Stenopelmus rufinasus, Cyrtobagous salviniae, Neohydronomus affinis, and Lysathia n. sp.). To achieve this, the selected plant species were grown in a three-factor experimental design in winter (CO2 X nutrients X herbivory), and another two-factorial design in summer (CO2 X herbivory). Atmospheric CO2 concentrations were set at ambient (400 ppm) or elevated (800 ppm), as per the predictions of the IPCC. As per my hypothesis, the results suggest that these species will become more challenging in future due to increased biomass production, asexual reproduction and a higher C: N ratio which is evident under high CO2 concentrations. Although the biological control agents were in some instances able to reduce this CO2 fertilisation effect, their efficacy was significantly reduced compared with the levels of control observed at ambient CO2. These results suggest that additional biological control agents and other management methods may be needed for continued control of these invasive macrophytes, both in South Africa and further afield where they are problematic.
- Full Text:
- Date Issued: 2020
An investigation into the readiness of open source software to build a Telco Cloud for virtualising network functions
- Authors: Chindeka, Tapiwa C
- Date: 2020
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/124320 , vital:35593
- Description: Cloud computing offers new mechanisms that change the way networks can be created and managed. The increased demand for multimedia and Internet of Things (IoT) services using the Internet Protocol is also fueling the need to look more into a networking approach that is less reliant on physical hardware components and allows new networks and network components to be created on-demand. Network Function Virtualisation (NFV) is a networking paradigm that decouples network functions from the hardware on which they run on. This offers new approaches to telecommunication providers who are looking to new ways of improving Quality of Service (QoS) in cost effective ways. Cloud technologies have given way to more specialised cloud environments such as the telco cloud. The telco cloud is a cloud environment where telecommunication services are hosted utilising NFV techniques. As the use of telecommunication standards moves towards 5G, network services will be provided in a virtualised manner in order to keep up with the demand. Open source software is a driver for innovation as it is has a collaborative culture to support it. This research investigates the readiness of open source tools to build a telco cloud that supports functions such as autoscaling and fault tolerance. Currently available open source software was explored for the different aspects involved in building a cloud from the ground up. The ETSI NFV MANO framework is also discussed as it is a widely used guiding standard for implementing NFV. Guided by the ETSI NFV MANO framework, open source software was used in an experiment to build a resilient cloud environment in which a virtualised IP Multimedia Subsystem (vIMS) network was deployed. Through this experimentation, it is evident that open source tools are mature enough to build the cloud environment and its ETSI NFV MANO compliant orchestration. However, features such as autoscaling and fault tolerance are still fairly immature and experimental.
- Full Text:
- Date Issued: 2020
- Authors: Chindeka, Tapiwa C
- Date: 2020
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/124320 , vital:35593
- Description: Cloud computing offers new mechanisms that change the way networks can be created and managed. The increased demand for multimedia and Internet of Things (IoT) services using the Internet Protocol is also fueling the need to look more into a networking approach that is less reliant on physical hardware components and allows new networks and network components to be created on-demand. Network Function Virtualisation (NFV) is a networking paradigm that decouples network functions from the hardware on which they run on. This offers new approaches to telecommunication providers who are looking to new ways of improving Quality of Service (QoS) in cost effective ways. Cloud technologies have given way to more specialised cloud environments such as the telco cloud. The telco cloud is a cloud environment where telecommunication services are hosted utilising NFV techniques. As the use of telecommunication standards moves towards 5G, network services will be provided in a virtualised manner in order to keep up with the demand. Open source software is a driver for innovation as it is has a collaborative culture to support it. This research investigates the readiness of open source tools to build a telco cloud that supports functions such as autoscaling and fault tolerance. Currently available open source software was explored for the different aspects involved in building a cloud from the ground up. The ETSI NFV MANO framework is also discussed as it is a widely used guiding standard for implementing NFV. Guided by the ETSI NFV MANO framework, open source software was used in an experiment to build a resilient cloud environment in which a virtualised IP Multimedia Subsystem (vIMS) network was deployed. Through this experimentation, it is evident that open source tools are mature enough to build the cloud environment and its ETSI NFV MANO compliant orchestration. However, features such as autoscaling and fault tolerance are still fairly immature and experimental.
- Full Text:
- Date Issued: 2020
Finite precision arithmetic in Polyphase Filterbank implementations
- Authors: Myburgh, Talon
- Date: 2020
- Subjects: Radio interferometers , Interferometry , Radio telescopes , Gate array circuits , Floating-point arithmetic , Python (Computer program language) , Polyphase Filterbank , Finite precision arithmetic , MeerKAT
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/146187 , vital:38503
- Description: The MeerKAT is the most sensitive radio telescope in its class, and it is important that systematic effects do not limit the dynamic range of the instrument, preventing this sensitivity from being harnessed for deep integrations. During commissioning, spurious artefacts were noted in the MeerKAT passband and the root cause was attributed to systematic errors in the digital signal path. Finite precision arithmetic used by the Polyphase Filterbank (PFB) was one of the main factors contributing to the spurious responses, together with bugs in the firmware. This thesis describes a software PFB simulator that was built to mimic the MeerKAT PFB and allow investigation into the origin and mitigation of the effects seen on the telescope. This simulator was used to investigate the effects in signal integrity of various rounding techniques, overflow strategies and dual polarisation processing in the PFB. Using the simulator to investigate a number of different signal levels, bit-width and algorithmic scenarios, it gave insight into how the periodic dips occurring in the MeerKAT passband were the result of the implementation using an inappropriate rounding strategy. It further indicated how to select the best strategy for preventing overflow while maintaining high quantization effciency in the FFT. This practice of simulating the design behaviour in the PFB independently of the tools used to design the DSP firmware, is a step towards an end-to-end simulation of the MeerKAT system (or any radio telescope using nite precision digital signal processing systems). This would be useful for design, diagnostics, signal analysis and prototyping of the overall instrument.
- Full Text:
- Date Issued: 2020
- Authors: Myburgh, Talon
- Date: 2020
- Subjects: Radio interferometers , Interferometry , Radio telescopes , Gate array circuits , Floating-point arithmetic , Python (Computer program language) , Polyphase Filterbank , Finite precision arithmetic , MeerKAT
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/146187 , vital:38503
- Description: The MeerKAT is the most sensitive radio telescope in its class, and it is important that systematic effects do not limit the dynamic range of the instrument, preventing this sensitivity from being harnessed for deep integrations. During commissioning, spurious artefacts were noted in the MeerKAT passband and the root cause was attributed to systematic errors in the digital signal path. Finite precision arithmetic used by the Polyphase Filterbank (PFB) was one of the main factors contributing to the spurious responses, together with bugs in the firmware. This thesis describes a software PFB simulator that was built to mimic the MeerKAT PFB and allow investigation into the origin and mitigation of the effects seen on the telescope. This simulator was used to investigate the effects in signal integrity of various rounding techniques, overflow strategies and dual polarisation processing in the PFB. Using the simulator to investigate a number of different signal levels, bit-width and algorithmic scenarios, it gave insight into how the periodic dips occurring in the MeerKAT passband were the result of the implementation using an inappropriate rounding strategy. It further indicated how to select the best strategy for preventing overflow while maintaining high quantization effciency in the FFT. This practice of simulating the design behaviour in the PFB independently of the tools used to design the DSP firmware, is a step towards an end-to-end simulation of the MeerKAT system (or any radio telescope using nite precision digital signal processing systems). This would be useful for design, diagnostics, signal analysis and prototyping of the overall instrument.
- Full Text:
- Date Issued: 2020
Learners’ perception on the effect of infrastructure development on academic performance in Port Elizabeth public secondary schools
- Authors: Goduka, Nomava
- Date: 2020
- Subjects: Infrastructure (Economics) -- Planning , School facilities -- South Africa -- Port Elizabeth -- Finance Academic achievement
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/46053 , vital:39479
- Description: South Africa is striving to attain quality equal education; however, this ideal is affected by various factors such as discrimination, learner-related challenges (e.g. dilapidated rural schools, poverty, and violence), educator-related challenges (e.g. low morale and motivation, and poor administration and management of schools), and governmental issues (e.g. a lack of will, lacklustre attitudes, and an inability to deliver resources and/or services). While the National Department of Basic Education is battling to eradicate the backlog of school infrastructure and maintenance, mud schools are still prevalent in rural areas. The present state of poverty-stricken areas is most affected by the mentioned challenges and, as a result, it is necessary to determine the nature and extent of the consequences in terms of academic performance. This study, therefore, investigated the reality of the current rural school situation by investigating the perceptions of learners on the effect of infrastructure development on their academic performance in public secondary schools. Three secondary schools in the Motherwell area in Port Elizabeth were chosen for the research setting. A quantitative research approach was deemed suitable for the study, and a questionnaire was utilised for data collection. A total of 151 questionnaires were completed. The key findings derived from the data indicated that inadequate infrastructure has a negative impact on academic performance. Some of the key issues pertaining to infrastructure included inadequate leisure areas, laboratories, libraries, and sport fields. Overcrowding in classrooms were also found to be prevalent, and posed a major barrier to learning. The findings of the study provided insights into the reality of rural education and were used as a basis for offering recommendations that may assist stakeholders to improve the current situation.
- Full Text:
- Date Issued: 2020
- Authors: Goduka, Nomava
- Date: 2020
- Subjects: Infrastructure (Economics) -- Planning , School facilities -- South Africa -- Port Elizabeth -- Finance Academic achievement
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/46053 , vital:39479
- Description: South Africa is striving to attain quality equal education; however, this ideal is affected by various factors such as discrimination, learner-related challenges (e.g. dilapidated rural schools, poverty, and violence), educator-related challenges (e.g. low morale and motivation, and poor administration and management of schools), and governmental issues (e.g. a lack of will, lacklustre attitudes, and an inability to deliver resources and/or services). While the National Department of Basic Education is battling to eradicate the backlog of school infrastructure and maintenance, mud schools are still prevalent in rural areas. The present state of poverty-stricken areas is most affected by the mentioned challenges and, as a result, it is necessary to determine the nature and extent of the consequences in terms of academic performance. This study, therefore, investigated the reality of the current rural school situation by investigating the perceptions of learners on the effect of infrastructure development on their academic performance in public secondary schools. Three secondary schools in the Motherwell area in Port Elizabeth were chosen for the research setting. A quantitative research approach was deemed suitable for the study, and a questionnaire was utilised for data collection. A total of 151 questionnaires were completed. The key findings derived from the data indicated that inadequate infrastructure has a negative impact on academic performance. Some of the key issues pertaining to infrastructure included inadequate leisure areas, laboratories, libraries, and sport fields. Overcrowding in classrooms were also found to be prevalent, and posed a major barrier to learning. The findings of the study provided insights into the reality of rural education and were used as a basis for offering recommendations that may assist stakeholders to improve the current situation.
- Full Text:
- Date Issued: 2020
Household and business recycling programs as green strategies for waste management in East London, South Africa
- Authors: Fotoyi, Tenjiwe
- Date: 2020
- Subjects: Refuse and refuse disposal
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/18687 , vital:42706
- Description: Municipalities in South Africa generate enormous waste which is disposed of in a few landfill sites which, in turn, have a limited life span. Household recycling is one important mechanism that can be used to reduce the amount of waste that reaches overfilled landfill sites. The city of East London is running out of land to dispose waste, and their landfill sites, in particular, are filing up fast. Most of the waste generated, is recyclable, however recycling in the city remains fragmented, and is moving very slowly. This is because of the lack of a co-ordinated approach between the BCMM and the local communities, across the many suburbs of East London. Considering that urban areas have limited space, effective and efficient use of current landfills is of strategic importance. This research therefore will examine ways of improving recycling in East London, addressing challenges facing current recycling. Data for this study was collected from the random administration of 100 questionnaires on different categories of respondents in the study area. The study revealed that by the introduction of the “Hand-on-waste” programme, the waste management personnel have taken the first step towards household waste recycling. However, the level of awareness and knowledge of the public on domestic recycling was quite poor, if residents are given the necessary encouragement, motivation and recycling infrastructure waste minimisation would be achieved
- Full Text:
- Date Issued: 2020
- Authors: Fotoyi, Tenjiwe
- Date: 2020
- Subjects: Refuse and refuse disposal
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/18687 , vital:42706
- Description: Municipalities in South Africa generate enormous waste which is disposed of in a few landfill sites which, in turn, have a limited life span. Household recycling is one important mechanism that can be used to reduce the amount of waste that reaches overfilled landfill sites. The city of East London is running out of land to dispose waste, and their landfill sites, in particular, are filing up fast. Most of the waste generated, is recyclable, however recycling in the city remains fragmented, and is moving very slowly. This is because of the lack of a co-ordinated approach between the BCMM and the local communities, across the many suburbs of East London. Considering that urban areas have limited space, effective and efficient use of current landfills is of strategic importance. This research therefore will examine ways of improving recycling in East London, addressing challenges facing current recycling. Data for this study was collected from the random administration of 100 questionnaires on different categories of respondents in the study area. The study revealed that by the introduction of the “Hand-on-waste” programme, the waste management personnel have taken the first step towards household waste recycling. However, the level of awareness and knowledge of the public on domestic recycling was quite poor, if residents are given the necessary encouragement, motivation and recycling infrastructure waste minimisation would be achieved
- Full Text:
- Date Issued: 2020
Gentrification in the Nelson Mandela Bay central business district
- Mageda, Nomthandazo Christellene
- Authors: Mageda, Nomthandazo Christellene
- Date: 2020
- Subjects: Gentrification , Urban renewal-- South Africa -- Nelson Mandela Metropolitan Municipality Neighborhoods -- South Africa -- Nelson Mandela Metropolitan Municipality
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/46119 , vital:39498
- Description: Gentrification is the process by which middle-class residents settle inner city neighborhood previously occupied by working-class. Gentrification has long been viewed as a consumption phenomenon, which is triggered by the urge of a certain fraction of a middle class – gentrifies – to create and maintain distinction. The research is designed as a socio-economic account to discuss the development in the NMB CBD area. In my research I examine the multiscalar forces affecting neighborhood change. This study will also examine the elements affecting and also the benefits of the gentrification process using quantitative methods. The CBD of the NMB represents certain universalities of gentrification in an old city. Today the city is no longer the regular of development but instead its progenitor. Adopting the language of “urbanization” and “cities of the future” will be considered in gearing the economic development arm. It does so by an extensive mapping of gentrification processes in Port Elizabeth. It also contains a smaller study on gentrification in Cape Town and also on an international level. The outcomes provide telling insights into gentrification as a generic process affecting not just low income areas (classical gentrification) and high income areas (super-gentrification), but also a wide-ranging spectrum of medium-income areas (ordinary gentrification). This study examines the interdependent variables of gentrification, going beyond a profitable analysis and incorporating the voice of all the actors involved in the process of gentrification, using quantitative analysis. By taking into account all perspectives, this study permits a holistic understanding of the social costs and benefits associated with gentrification. As multifaceted as gentrification is, it is becoming more pervasive in cities globally, a holistic tally of the social costs and benefits of revitalization projects becoming imperative. The study concludes with discussions of the contributions, limitations, recommendations for the NMB CBD and other cities that are considering revitalizing their urban cores and implications for future research.
- Full Text:
- Date Issued: 2020
- Authors: Mageda, Nomthandazo Christellene
- Date: 2020
- Subjects: Gentrification , Urban renewal-- South Africa -- Nelson Mandela Metropolitan Municipality Neighborhoods -- South Africa -- Nelson Mandela Metropolitan Municipality
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/46119 , vital:39498
- Description: Gentrification is the process by which middle-class residents settle inner city neighborhood previously occupied by working-class. Gentrification has long been viewed as a consumption phenomenon, which is triggered by the urge of a certain fraction of a middle class – gentrifies – to create and maintain distinction. The research is designed as a socio-economic account to discuss the development in the NMB CBD area. In my research I examine the multiscalar forces affecting neighborhood change. This study will also examine the elements affecting and also the benefits of the gentrification process using quantitative methods. The CBD of the NMB represents certain universalities of gentrification in an old city. Today the city is no longer the regular of development but instead its progenitor. Adopting the language of “urbanization” and “cities of the future” will be considered in gearing the economic development arm. It does so by an extensive mapping of gentrification processes in Port Elizabeth. It also contains a smaller study on gentrification in Cape Town and also on an international level. The outcomes provide telling insights into gentrification as a generic process affecting not just low income areas (classical gentrification) and high income areas (super-gentrification), but also a wide-ranging spectrum of medium-income areas (ordinary gentrification). This study examines the interdependent variables of gentrification, going beyond a profitable analysis and incorporating the voice of all the actors involved in the process of gentrification, using quantitative analysis. By taking into account all perspectives, this study permits a holistic understanding of the social costs and benefits associated with gentrification. As multifaceted as gentrification is, it is becoming more pervasive in cities globally, a holistic tally of the social costs and benefits of revitalization projects becoming imperative. The study concludes with discussions of the contributions, limitations, recommendations for the NMB CBD and other cities that are considering revitalizing their urban cores and implications for future research.
- Full Text:
- Date Issued: 2020
Evaluation of Baited Remote Underwater Video Systems (BRUVS) for monitoring fish communities in Lake Malawi/Niassa
- Authors: Van Wyk, Angus
- Date: 2020
- Subjects: Underwater videography -- Malawi , Chambo -- Malawi -- Monitoring , Fishes -- Malawi -- Monitoring , Oreochromis lidole -- Malawi -- Monitoring
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/145546 , vital:38448
- Description: Baited Remote Underwater Video systems (BRUVS) have become a well-established in-situ monitoring technique in clearwater aquatic ecosystems. The relatively low cost, nondestructive and non-extractive nature of this technique permits BRUVS to be employed in a wide range of habitats. To date, the vast majority of studies using BRUVS technology have been conducted in marine habitats. Subsequently, BRUVS applications in freshwater habitats are scant, and techniques are not well developed. The primary objective of this thesis was to address this knowledge gap and develop standard operating procedures for BRUVS employment in Lake Malawi/Niassa and explore the potential of BRUVS as a monitoring tool for fish communities in the African Great Lakes. Eight easily identifiable species groups, representative of Lake Malawi/Niassa inshore fish communities, were used to develop the technique. The optimal BRUVS deployment time to obtain 95 % species accumulation was achieved in a 15-minute recording period. Power analysis, using a pre-determined 80 % power, a confidence interval of 95 % and a significance level of < 0.05 was used to determine annual sampling effort requirements for each species group. The power analysis was performed to detect a 10 % change in abundance over a hypothetical 10-year monitoring scenario. In areas where fish abundance was lower, the sampling effort required to monitor key fisheries species was significantly higher. For example, Chambo, the local Oreochromis (Nyasalapia) species flock, required an annual sampling effort of 120 deployments in Malawi compared to 56 in Mozambique ( < 0.05). Chambo had a higher detection probability in areas of lesser fishing pressure and were found in higher abundances in deeper, less accessible habitats. Deep-water (> 20 m) and rocky habitats were most important in explaining Chambo abundance and detection probability. The size-structure of Chambo in Lake Malawi/Niassa reflects size-specific depth and habitat migrations. Larger Chambo were observed aggregating in waters deeper than 20 m and a broader size range of individuals were observed utilising structured habitat. The effects of fishing are apparent in the size-structure of Chambo in the areas sampled. In study areas exposed to greater levels of fishing pressure – such as Malawi, the BRUVS detected significantly fewer individuals within sexually mature size classes, and the average size was smaller than in areas with less exploitation.
- Full Text:
- Date Issued: 2020
- Authors: Van Wyk, Angus
- Date: 2020
- Subjects: Underwater videography -- Malawi , Chambo -- Malawi -- Monitoring , Fishes -- Malawi -- Monitoring , Oreochromis lidole -- Malawi -- Monitoring
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/145546 , vital:38448
- Description: Baited Remote Underwater Video systems (BRUVS) have become a well-established in-situ monitoring technique in clearwater aquatic ecosystems. The relatively low cost, nondestructive and non-extractive nature of this technique permits BRUVS to be employed in a wide range of habitats. To date, the vast majority of studies using BRUVS technology have been conducted in marine habitats. Subsequently, BRUVS applications in freshwater habitats are scant, and techniques are not well developed. The primary objective of this thesis was to address this knowledge gap and develop standard operating procedures for BRUVS employment in Lake Malawi/Niassa and explore the potential of BRUVS as a monitoring tool for fish communities in the African Great Lakes. Eight easily identifiable species groups, representative of Lake Malawi/Niassa inshore fish communities, were used to develop the technique. The optimal BRUVS deployment time to obtain 95 % species accumulation was achieved in a 15-minute recording period. Power analysis, using a pre-determined 80 % power, a confidence interval of 95 % and a significance level of < 0.05 was used to determine annual sampling effort requirements for each species group. The power analysis was performed to detect a 10 % change in abundance over a hypothetical 10-year monitoring scenario. In areas where fish abundance was lower, the sampling effort required to monitor key fisheries species was significantly higher. For example, Chambo, the local Oreochromis (Nyasalapia) species flock, required an annual sampling effort of 120 deployments in Malawi compared to 56 in Mozambique ( < 0.05). Chambo had a higher detection probability in areas of lesser fishing pressure and were found in higher abundances in deeper, less accessible habitats. Deep-water (> 20 m) and rocky habitats were most important in explaining Chambo abundance and detection probability. The size-structure of Chambo in Lake Malawi/Niassa reflects size-specific depth and habitat migrations. Larger Chambo were observed aggregating in waters deeper than 20 m and a broader size range of individuals were observed utilising structured habitat. The effects of fishing are apparent in the size-structure of Chambo in the areas sampled. In study areas exposed to greater levels of fishing pressure – such as Malawi, the BRUVS detected significantly fewer individuals within sexually mature size classes, and the average size was smaller than in areas with less exploitation.
- Full Text:
- Date Issued: 2020
Profitable day-neutral strawberry variety and planting date combination for year-round strawberry fruit production in the Southern Cape
- Authors: Parehwa, Patience
- Date: 2020
- Subjects: Strawberries -- Fertilizers
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/48599 , vital:40894
- Description: South Africa’s strawberry production is currently limited to winter and spring production. Strawberry growers have not been able to extend the growing season for year-round strawberry production primarily due to variety- and climatic limitations. Consumers world-wide, however, demand year-round supply of strawberries on their markets. Delayed planting and robust day-neutral varieties may allow growers to extend the marketing season. To investigate the most profitable variety and planting date combination for season extension in the Southern Cape, trials were conducted at Groeneweide Farm, George. Day-neutral strawberry varieties Monterey, San Andreas and Albion were planted at 30-day intervals from April to September for 3 seasons. They were planted in single layer, standard coir grow-bags at a density of 75 000/ha. Analyses of variance (ANOVA) were performed on vegetative growth stages (crown and runner formation), yield (flowering and fruit yield), fruit quality (fruit mass and total soluble solids content) and gross income. The analysis encompassed variety, month and planting month × variety interaction. ‘Monterey’ significantly outperformed ‘San Andreas’ which in turn significantly (p<0.05) outperformed ‘Albion’ for crown number, flower number, yield, fruit size and margin above cost. ‘San Andreas’ produced significantly fewer runners than ‘Monterey’ and ‘Albion’. ‘Albion’ produced significantly higher TSS followed by ‘Monterey’ and ‘San Andreas’. Over all, the three day-neutral varieties had no significant differences in yield within all planting dates. However, August and September planting dates produced significantly more runners, flowers and higher margin above cost, but significantly smaller fruit and lower total soluble solids (TSS). ‘Monterey’ planted in April and May produced the highest margin above cost and brought earliness to the production window. Together with ‘San Andreas’ planted in August, which extended the harvest season and gave similar margin above cost, it is possible to maximise profitability, extend both ends of the harvest season and also minimise hygiene costs associated with weekly runner removal. Since the strawberry price is very responsive, to quantity supplied, an oversupply out of the normal season, may however lead to lower prices affecting gross income.
- Full Text:
- Date Issued: 2020
- Authors: Parehwa, Patience
- Date: 2020
- Subjects: Strawberries -- Fertilizers
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/48599 , vital:40894
- Description: South Africa’s strawberry production is currently limited to winter and spring production. Strawberry growers have not been able to extend the growing season for year-round strawberry production primarily due to variety- and climatic limitations. Consumers world-wide, however, demand year-round supply of strawberries on their markets. Delayed planting and robust day-neutral varieties may allow growers to extend the marketing season. To investigate the most profitable variety and planting date combination for season extension in the Southern Cape, trials were conducted at Groeneweide Farm, George. Day-neutral strawberry varieties Monterey, San Andreas and Albion were planted at 30-day intervals from April to September for 3 seasons. They were planted in single layer, standard coir grow-bags at a density of 75 000/ha. Analyses of variance (ANOVA) were performed on vegetative growth stages (crown and runner formation), yield (flowering and fruit yield), fruit quality (fruit mass and total soluble solids content) and gross income. The analysis encompassed variety, month and planting month × variety interaction. ‘Monterey’ significantly outperformed ‘San Andreas’ which in turn significantly (p<0.05) outperformed ‘Albion’ for crown number, flower number, yield, fruit size and margin above cost. ‘San Andreas’ produced significantly fewer runners than ‘Monterey’ and ‘Albion’. ‘Albion’ produced significantly higher TSS followed by ‘Monterey’ and ‘San Andreas’. Over all, the three day-neutral varieties had no significant differences in yield within all planting dates. However, August and September planting dates produced significantly more runners, flowers and higher margin above cost, but significantly smaller fruit and lower total soluble solids (TSS). ‘Monterey’ planted in April and May produced the highest margin above cost and brought earliness to the production window. Together with ‘San Andreas’ planted in August, which extended the harvest season and gave similar margin above cost, it is possible to maximise profitability, extend both ends of the harvest season and also minimise hygiene costs associated with weekly runner removal. Since the strawberry price is very responsive, to quantity supplied, an oversupply out of the normal season, may however lead to lower prices affecting gross income.
- Full Text:
- Date Issued: 2020
Design of a Traffic Surveillance Application using iFogSim
- Authors: Sinqandu, Mluleki
- Date: 2020
- Subjects: Cloud computing
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/18676 , vital:42705
- Description: __iFogSim is a toolkit to model, simulate and evaluate networks of Fog computing, Edge computing and Internet of Things (IoT). This framework provides the capabilities of analysing and evaluating the performance of applications and resource management policies in Fog/IoT environments, based on which designers can model and test their applications. This thesis proposes a novel application model of a traffic surveillance vehicular network application through smart cameras using iFogSim, where the scenario of multiple vehicles tracking is considered. The effectiveness of the proposed application model is assessed and validated by simulations using a modified application model inherited from a case study of intelligent surveillance through distributed camera networks introduced. Simulations are conducted using the iFogSim tool and performance evaluation is done. The comparison between one vehicle and multiple vehicle tracking is done and the results demonstrate that the multiple vehicle application model achieves a better performance in terms of average latency and data transfer rate
- Full Text:
- Date Issued: 2020
- Authors: Sinqandu, Mluleki
- Date: 2020
- Subjects: Cloud computing
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/18676 , vital:42705
- Description: __iFogSim is a toolkit to model, simulate and evaluate networks of Fog computing, Edge computing and Internet of Things (IoT). This framework provides the capabilities of analysing and evaluating the performance of applications and resource management policies in Fog/IoT environments, based on which designers can model and test their applications. This thesis proposes a novel application model of a traffic surveillance vehicular network application through smart cameras using iFogSim, where the scenario of multiple vehicles tracking is considered. The effectiveness of the proposed application model is assessed and validated by simulations using a modified application model inherited from a case study of intelligent surveillance through distributed camera networks introduced. Simulations are conducted using the iFogSim tool and performance evaluation is done. The comparison between one vehicle and multiple vehicle tracking is done and the results demonstrate that the multiple vehicle application model achieves a better performance in terms of average latency and data transfer rate
- Full Text:
- Date Issued: 2020
An investigation of the morphological and electrochemical properties of anode titanate materials used in li-ion batteries
- Authors: Gelant, Charmaine
- Date: 2020
- Subjects: Electrodes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/48346 , vital:40851
- Description: The chemistry involved in the synthesis of lithium titanium oxide (Li4Ti5O12) for lithium ion battery applications is critical for understanding and optimizing the most cost-efficient manufacturing route. This study investigates the sol-gel synthesis technique of Li4Ti5O12 using triethanolamine (TEOA) as complexing agent by means of in-situ Powder X-ray Diffraction (PXRD). The influence of doping with various metals such as Al3+, Mg2+ , Co3+ and Ni2+ that were made as precursors was considered for comparison purposes due to literature showing improved electrochemical performance using the molecular formula of Li4Ti4.95M0.05O12. The in-situ PXRD technique was used to identify the phase changes that occurred in the thermal synthesis process from the sol-gel precursors to the final crystalline oxides. The materials’ decomposition mechanisms were characterized by thermal gravimetric analysis (TGA) as the precursors were gradually heated to obtain the final oxides. BET surface area analysis and scanning electron microscopy (SEM) were used in order to obtain a morphological understanding of the materials during the synthetic route at specific temperature regions. The in-situ studies have shown that the precursor materials are amorphous at room temperature to about 550 °C, after which the spinel and anatase formed, with relatively small crystallites and a large surface area. The study also showed that a crystalline intermediate phase formed at around 150-200 °C, which then disappeared above 250 °C and was speculated to be a titanium acid (H2Ti2O5.H2O). Upon further heating above 250 °C, the anatase phase converted to the high temperature stable TiO2 phase, rutile, also with an increased formation of the expected LTO spinel phase around 850 °C. Keeping the material at 850 °C, isothermally, did show further conversion of the rutile into the desired spinel phase Li4Ti5O12 (LTO) with an increase in the crystallite size and a decrease in surface area. SEM analysis of the material at 850 °C did show some extensive sintering of the particles with some samples indicating the presence of an additional β-Li2TiO3 phase that formed at the high temperatures. Upon cooling, the βLi2TiO3 phase showed a distinctive powder diffraction pattern besides the typical spinel II LTO phase. The study showed that in comparison to the oxide formed at 850 °C, a mixed phase material of the spinel LTO, anatase and rutile could be achieved at temperatures close to 650 °C with very small crystallites and a relatively large surface area that showed desirable electrochemical properties. Suitable Li-ion coin cells were built with the undoped spinel and doped materials that were isothermally made at 650 °C and 850 °C, whereby their electrochemical properties were tested in the form of cell capacity, electrochemical impedance spectroscopy (EIS) and differential capacity (dQ/dV) studies. The cells made with the materials at 850 °C provided reasonable capacity where the dQ/dV plots did show a single step redox reaction at around 1.5V vs Li/Li+ . These were compared to cells made with commercially available LTO and highlighted the importance of high surface area and small particle size of the active material in order to achieve acceptable electrochemical performances. The cells with the materials made at 650 °C showed to have good capacity upon the first discharge with a number of irreversible phase transitions that were subsequently not observed upon recharging. The dQ/dV graphs showed that the phase transitions were unique to the mixed phase composition of the material made at low temperatures and the cells made with the doped spinel materials were on average better performing than the undoped LTO material. Subsequent grinding steps of the active material made at 850 °C improved the capacity performance of the cells but were still lower when compared to the commercially available material. Hence, significantly longer grinding and processing time would be required to achieve battery active materials that are acceptable for commercial use. This study highlights the importance of understanding the phase transitions that occur during the synthesis route of making battery active material, where doping with different elements and using lower temperatures during synthesis could lead to electroactive materials that do not require additional excessive processing steps such as grinding.
- Full Text:
- Date Issued: 2020
- Authors: Gelant, Charmaine
- Date: 2020
- Subjects: Electrodes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/48346 , vital:40851
- Description: The chemistry involved in the synthesis of lithium titanium oxide (Li4Ti5O12) for lithium ion battery applications is critical for understanding and optimizing the most cost-efficient manufacturing route. This study investigates the sol-gel synthesis technique of Li4Ti5O12 using triethanolamine (TEOA) as complexing agent by means of in-situ Powder X-ray Diffraction (PXRD). The influence of doping with various metals such as Al3+, Mg2+ , Co3+ and Ni2+ that were made as precursors was considered for comparison purposes due to literature showing improved electrochemical performance using the molecular formula of Li4Ti4.95M0.05O12. The in-situ PXRD technique was used to identify the phase changes that occurred in the thermal synthesis process from the sol-gel precursors to the final crystalline oxides. The materials’ decomposition mechanisms were characterized by thermal gravimetric analysis (TGA) as the precursors were gradually heated to obtain the final oxides. BET surface area analysis and scanning electron microscopy (SEM) were used in order to obtain a morphological understanding of the materials during the synthetic route at specific temperature regions. The in-situ studies have shown that the precursor materials are amorphous at room temperature to about 550 °C, after which the spinel and anatase formed, with relatively small crystallites and a large surface area. The study also showed that a crystalline intermediate phase formed at around 150-200 °C, which then disappeared above 250 °C and was speculated to be a titanium acid (H2Ti2O5.H2O). Upon further heating above 250 °C, the anatase phase converted to the high temperature stable TiO2 phase, rutile, also with an increased formation of the expected LTO spinel phase around 850 °C. Keeping the material at 850 °C, isothermally, did show further conversion of the rutile into the desired spinel phase Li4Ti5O12 (LTO) with an increase in the crystallite size and a decrease in surface area. SEM analysis of the material at 850 °C did show some extensive sintering of the particles with some samples indicating the presence of an additional β-Li2TiO3 phase that formed at the high temperatures. Upon cooling, the βLi2TiO3 phase showed a distinctive powder diffraction pattern besides the typical spinel II LTO phase. The study showed that in comparison to the oxide formed at 850 °C, a mixed phase material of the spinel LTO, anatase and rutile could be achieved at temperatures close to 650 °C with very small crystallites and a relatively large surface area that showed desirable electrochemical properties. Suitable Li-ion coin cells were built with the undoped spinel and doped materials that were isothermally made at 650 °C and 850 °C, whereby their electrochemical properties were tested in the form of cell capacity, electrochemical impedance spectroscopy (EIS) and differential capacity (dQ/dV) studies. The cells made with the materials at 850 °C provided reasonable capacity where the dQ/dV plots did show a single step redox reaction at around 1.5V vs Li/Li+ . These were compared to cells made with commercially available LTO and highlighted the importance of high surface area and small particle size of the active material in order to achieve acceptable electrochemical performances. The cells with the materials made at 650 °C showed to have good capacity upon the first discharge with a number of irreversible phase transitions that were subsequently not observed upon recharging. The dQ/dV graphs showed that the phase transitions were unique to the mixed phase composition of the material made at low temperatures and the cells made with the doped spinel materials were on average better performing than the undoped LTO material. Subsequent grinding steps of the active material made at 850 °C improved the capacity performance of the cells but were still lower when compared to the commercially available material. Hence, significantly longer grinding and processing time would be required to achieve battery active materials that are acceptable for commercial use. This study highlights the importance of understanding the phase transitions that occur during the synthesis route of making battery active material, where doping with different elements and using lower temperatures during synthesis could lead to electroactive materials that do not require additional excessive processing steps such as grinding.
- Full Text:
- Date Issued: 2020
Functional conversion of commercial buildings in South Africa
- Authors: Kuliti, Gerald
- Date: 2020
- Subjects: Commercial buildings -- South Africa , Buildings -- Conservation and restoration Buildings -- Maintenance and repair
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/46075 , vital:39485
- Description: In the major cities of South Africa, there is a prevalence of originally built commercial buildings that are being converted into residential apartments or other industrial economic spaces. These secondary users refurbish the original structures to accommodate their new specialised requirements and this mostly happens after the buildings have been lying vacant for a long period of time. The study by Y.Long et al. (2011) narrates the changes in land use, identification of driving forces and the mapping of areas that are experiencing intense land use transformation. Properties that were developed for a focused particular use, were found to have been redeveloped within a few years for other functions. Subjects that were included in the sample were selected to meet specific criteria. The stakeholders had to meet the following criteria to be included in the sample: They were registered professionals in the built environment such as: Architecture, Engineering (civil, electrical, mechanical and structural), Quantity Surveying, Town Planning, Construction Management and Estate management The method that was used to collect data was self-completion questionnaire that was given out by electronic mail. After the data was collected, it was organised and analysed. For the analysis of closed-ended questions, an online programme called QuestionPro, was used, data was analysed by using descriptive statistics and frequency tables were drawn and from these, the data was presented in pie diagrams and bar graphs. While it is necessary to expand the horizons of the ever-growing global population, it is imperative that all stakeholders in the building industry work together to find sustainable solutions to residential and industrial development.
- Full Text:
- Date Issued: 2020
- Authors: Kuliti, Gerald
- Date: 2020
- Subjects: Commercial buildings -- South Africa , Buildings -- Conservation and restoration Buildings -- Maintenance and repair
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/46075 , vital:39485
- Description: In the major cities of South Africa, there is a prevalence of originally built commercial buildings that are being converted into residential apartments or other industrial economic spaces. These secondary users refurbish the original structures to accommodate their new specialised requirements and this mostly happens after the buildings have been lying vacant for a long period of time. The study by Y.Long et al. (2011) narrates the changes in land use, identification of driving forces and the mapping of areas that are experiencing intense land use transformation. Properties that were developed for a focused particular use, were found to have been redeveloped within a few years for other functions. Subjects that were included in the sample were selected to meet specific criteria. The stakeholders had to meet the following criteria to be included in the sample: They were registered professionals in the built environment such as: Architecture, Engineering (civil, electrical, mechanical and structural), Quantity Surveying, Town Planning, Construction Management and Estate management The method that was used to collect data was self-completion questionnaire that was given out by electronic mail. After the data was collected, it was organised and analysed. For the analysis of closed-ended questions, an online programme called QuestionPro, was used, data was analysed by using descriptive statistics and frequency tables were drawn and from these, the data was presented in pie diagrams and bar graphs. While it is necessary to expand the horizons of the ever-growing global population, it is imperative that all stakeholders in the building industry work together to find sustainable solutions to residential and industrial development.
- Full Text:
- Date Issued: 2020
On the association of graphs to rings
- Authors: Mzulwini, Sboniso
- Date: 2020
- Subjects: Categories (Mathematics)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/47060 , vital:39779
- Description: Let R be a commutative ring with nonzero identity, and let Z (R) be the set of its zerodivisors. There exists an association between a simple graph (R) and the set Z(R) of nonzero zero-divisors of R. In this dissertation we investigate how the properties of R a⁄ect the properties of (R) and vice versa. There are other graphs that are associated with R. Some of these are shown to be special cases of the congruence-based zero-divisor graph.
- Full Text:
- Date Issued: 2020
- Authors: Mzulwini, Sboniso
- Date: 2020
- Subjects: Categories (Mathematics)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/47060 , vital:39779
- Description: Let R be a commutative ring with nonzero identity, and let Z (R) be the set of its zerodivisors. There exists an association between a simple graph (R) and the set Z(R) of nonzero zero-divisors of R. In this dissertation we investigate how the properties of R a⁄ect the properties of (R) and vice versa. There are other graphs that are associated with R. Some of these are shown to be special cases of the congruence-based zero-divisor graph.
- Full Text:
- Date Issued: 2020
An assessment of temporal changes in selective biological characteristics of chokka squid (Loligo reynaudii d’Órbigny, 1845)
- Authors: Mmethi, Mpho Audrey
- Date: 2020
- Subjects: Loligo reynaudii , Squids -- Morphology , Squids -- South Africa , Squid fisheries -- South Africa
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/143516 , vital:38253
- Description: The biological characteristics of chokka squid, Loligo reynaudii, sampled off the south coast of South Africa, were compared between 1994 and 2017 to ascertain any temporal changes using analysis of length frequency (LF) data over 15 years (1996–2017), and mantle length (ML) and total weight (TW) relationships over 9 years (1994–2016). To investigate feeding, two caecum colours were chosen for analysis (white: no food ingested, and yellow: six to seven hours after food ingestion). Other factors were kept constant throughout: similar sampling period of 60 days in spring-summer, similar depths and areas sampled, and identical maturity stage. Anecdotal evidence from fishers suggested that the length frequency and ML_TW relationship of chokka have changed over years, with possibilities to be linked to fishing activities and environmental conditions. Also, there is evidence in the published literature that both fisheries and environment may influence length distributions in populations of fish and cephalopods over time. The results from this study showed no significant differences between length frequencies over the time series. However, a significant decrease in length frequencies between 2014 and 2016 was noted when paired data was analysed by Anova (2014:2015, 2014:2016 and 2015:2016), which was initially noted in kernel density, Figure 2, hence an additional analysis was done. These changes were not linked to sea temperature (at 9 m, 14 m, 18 m, and 21 m depth strata), with not significant (P>0.05) results when temperature was analysed by t-test between 2002 and 2015. There was also a weak correlation between length frequency and the total squid catch in a given year (F Statistic (df = 1; 13) is 3.686 and 5.394 for males and females respectively, R² is 0.221 for males and 0.293 for females), but too weak to interpret, given the lack of other supporting data and the short time series. The ML_TW relationship showed no significant trends between the years for either sex. There was also no correlation between the ML_TW and total squid catch or temperature. A white caecum occurred significantly more often in males than in females (dof = 1; p < 0.05) from General Linear Model (GLM), indicating that the presence of non-feeding males in the spawning grounds may be linked to the behaviour of spawning squid.
- Full Text:
- Date Issued: 2020
- Authors: Mmethi, Mpho Audrey
- Date: 2020
- Subjects: Loligo reynaudii , Squids -- Morphology , Squids -- South Africa , Squid fisheries -- South Africa
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/143516 , vital:38253
- Description: The biological characteristics of chokka squid, Loligo reynaudii, sampled off the south coast of South Africa, were compared between 1994 and 2017 to ascertain any temporal changes using analysis of length frequency (LF) data over 15 years (1996–2017), and mantle length (ML) and total weight (TW) relationships over 9 years (1994–2016). To investigate feeding, two caecum colours were chosen for analysis (white: no food ingested, and yellow: six to seven hours after food ingestion). Other factors were kept constant throughout: similar sampling period of 60 days in spring-summer, similar depths and areas sampled, and identical maturity stage. Anecdotal evidence from fishers suggested that the length frequency and ML_TW relationship of chokka have changed over years, with possibilities to be linked to fishing activities and environmental conditions. Also, there is evidence in the published literature that both fisheries and environment may influence length distributions in populations of fish and cephalopods over time. The results from this study showed no significant differences between length frequencies over the time series. However, a significant decrease in length frequencies between 2014 and 2016 was noted when paired data was analysed by Anova (2014:2015, 2014:2016 and 2015:2016), which was initially noted in kernel density, Figure 2, hence an additional analysis was done. These changes were not linked to sea temperature (at 9 m, 14 m, 18 m, and 21 m depth strata), with not significant (P>0.05) results when temperature was analysed by t-test between 2002 and 2015. There was also a weak correlation between length frequency and the total squid catch in a given year (F Statistic (df = 1; 13) is 3.686 and 5.394 for males and females respectively, R² is 0.221 for males and 0.293 for females), but too weak to interpret, given the lack of other supporting data and the short time series. The ML_TW relationship showed no significant trends between the years for either sex. There was also no correlation between the ML_TW and total squid catch or temperature. A white caecum occurred significantly more often in males than in females (dof = 1; p < 0.05) from General Linear Model (GLM), indicating that the presence of non-feeding males in the spawning grounds may be linked to the behaviour of spawning squid.
- Full Text:
- Date Issued: 2020