- Title
- The use and performance of recycling polypropylene in lead-acid battery cases
- Creator
- Rust, Nico
- Subject
- Polypropylene
- Subject
- Lead-acid batteries
- Date Issued
- 2004
- Date
- 2004
- Type
- Thesis
- Type
- Masters
- Type
- MTech (Chemistry)
- Identifier
- vital:10978
- Identifier
- http://hdl.handle.net/10948/269
- Identifier
- Polypropylene
- Identifier
- Lead-acid batteries
- Description
- Polypropylene has proven to be the ideal material for the outer shell of the lead acid batteries. Due to its mold-ability and inert properties the material provides a capsule for the functioning components of the lead acid battery and can withstand a variety conditions encountered during its application, such as impact shock resistance, high and low temperatures and acid resistance. Polypropylene has however become of great concern with regards to environmental pollution since it is generally resistant to normal conditions of degradation and can only be properly disposed of by incineration. This factor has encouraged the industry to find ways to regenerate spent polypropylene. A good example of such a process is the recycling of lead acid batteries. This allows not only for the regeneration of lead, but also for the recycling of polypropylene in the manufacturing of battery cases. There are some cost advantages in using recycled polypropylene. However it does have its disadvantages in that the material does start to deteriorate after multiple processes. A common practice amongst battery manufacturers is to add virgin polypropylene to the recycled material in order to ensure performance consistency. The comparative study investigated the use of various ratios of virgin and recycled PP in the manufacturing of lead acid battery cases and their influence on the physical properties and performance of the final material. The degradation of PP was also investigated as the material was subjected to multiple manufacturing processes where the influence of stabilizers was further considered. A common technique of PP analysis such as MFI was shown to be an effective technique to maintain good quality control. The study further showed that it is important that the material grade of PP used in the manufacturing of the battery case and lid is compatible in order to allow for effective heating sealing of the two components. Polypropylene has a waxy surface finish and it is generally difficult to label or write on. Labels tend to fall off in application and make it difficult to maintain a track record of the manufactured batteries with time. This study showed successfully that a laser activated dye can be added to the PP without influencing its color or its performance. This allows for successful labeling of battery cases by various bar coding writers that can trace the battery through its manufacturing process. Lead acid batteries are often operated outside the specified temperature range that is determined by battery manufacturers resulting in premature failure. These failures can occur within the warranty period of the battery and result in illicit claims since the monitoring of the batteries in its application was not possible. A suitable temperature monitoring device was designed that would be incorporated into the vent cap or lid of the battery case. The device contained temperature sensitive indicators that would undergo a permanent color change at specified temperatures thereby giving the battery manufacturer an indication as to the maximum temperature the battery was exposed to.
- Format
- xi, 139 leaves
- Format
- Publisher
- Port Elizabeth Technikon
- Publisher
- Faculty of Science
- Language
- English
- Rights
- Nelson Mandela Metropolitan University
- Hits: 944
- Visitors: 1158
- Downloads: 276
Thumbnail | File | Description | Size | Format | |||
---|---|---|---|---|---|---|---|
View Details Download | SOURCEPDF | 840 KB | Adobe Acrobat PDF | View Details Download |