- Title
- Use of recycled rubber tyres as an alternative ingredient in cementitious building materials
- Creator
- Yuill, Robert Mark
- Subject
- Building materials
- Subject
- Building materials -- Environmental aspects Sustainable construction Recycled products
- Date Issued
- 2018
- Date
- 2018
- Type
- Thesis
- Type
- Masters
- Type
- MSc
- Identifier
- http://hdl.handle.net/10948/29783
- Identifier
- vital:30777
- Description
- The need to incorporate recycled materials in building products is becoming more important than ever before. There is an abundance of waste rubber tyres which in turn results in a waste management issue. The use of waste rubber tyres in cementitious building material provides a possible solution to the problem (Kathomi, 2009:10). Previous research has shown the introduction of recycled rubber tyre crumb can improve the durability, thermal and acoustic performance in residential and commercial buildings. This could result in lives of dwellers in concrete block buildings in South Africa improving due to these characteristics whilst potentially creating a cost-effective, sustainable building material. A grading analysis, loose and compacted bulk densities and relative densities were determined to provide a mix design. Three tests were conducted for this study namely compressive strength, fire and thermal performance and acoustic performance. The testing was conducted on 100mmx100mm cubes at varying rubber replacement percentages. The replacement values were 10%, 20% and 30% tested against a control of ordinary concrete. The waste rubber crumb was a replacement for sand. The research of this study showed 20 % decrease of compression strength at 10 % rubber replacement compared to the control, 55 % decrease at 20 % rubber replacement and 75% decrease at 30 % rubber replacement. The thermal performance test showed a 24 % lower temperature for 10 % rubber replacement compared to the control, 39 % lower temperature at 20 % rubber replacement and 52 % lower temperature at 30 % rubber replacement. All rubber replacement % samples and the control performed adequately in the flame resistance test. The smoke density test showed that all rubber replacement % samples did not release a quantity of smoke which would be deemed dangerous. The acoustic performance test showed the values at 10% rubber replacement was 6 % lower; at 20% rubber replacement; 4% lower and at 30% rubber replacement 14 % lower. Based on these results, the acoustic performance regarding transmission increases with a rubber replacement % higher than 20 %.
- Format
- xiv, 123 leaves
- Format
- Publisher
- Nelson Mandela University
- Publisher
- Faculty of Engineering, the Built Environment and Information Technology
- Language
- English
- Rights
- Nelson Mandela University
- Hits: 1105
- Visitors: 1200
- Downloads: 196
Collections
NMU School of the Built Environment
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | SOURCE1 | Robert Mark Yuill.pdf | 3 MB | Adobe Acrobat PDF | View Details Download |