- Title
- Design of metal ion-selective reagents for recovery of precious metals
- Creator
- Moleko-Boyce, Pulleng
- Subject
- Bioinorganic chemistry
- Subject
- Metal complexes Speciation (Chemistry)
- Date Issued
- 2019
- Date
- 2019
- Type
- Thesis
- Type
- Doctoral
- Type
- DPhil
- Identifier
- http://hdl.handle.net/10948/42510
- Identifier
- vital:36664
- Description
- The study is divided into two sections; namely, (1) the design of rhodium(III) specific chelating ligands (tridentate bis-benzimidazole derivatives), and (2) the development of iridium(IV)-specific quaternary diammonium cations with electron donating and electron withdrawing groups. Bis-benzimidazole chelating ligands used were bis((1H-benzimidazol-2-yl)methyl)amine (NNN1), bis((1H-benzimidazol-2-yl)ethyl)amine (NNN2), bis((1H-benzimidazol-2-yl)methyl)sulfide (NSN1) and bis((1H-benzimidazol-2-yl)ethyl)sulfide (NSN2). Quaternary diammonium cations used were tetramethylbenzyl-1,10-diammonium chloride (QuatDMDAMeBnz), tetrabenzyl-1,10-diammonium chloride (QuatDMDABnz), tetratrifluoromethylbenzyl-1,10-diammonium chloride (QuatDMDACF3Bnz) and tetranitrobenzyl-1,10-diammonium chloride (QuatDMDANO2Bnz). For both studies, polyvinylbenzylchloride (PVBC) nanofibers were used as support material. The PVBC nanofibers which were functionalised with bis-benzimidazole derivatives and quaternary diammonium cations, respectively, were investigated for the selectivity for Rh(III) over Ir(III), Pt(II), Pd(II) and Ni(II), and for separation of Ir(IV) from Rh(III), respectively. The sorbent materials were characterised by FTIR, SEM, BET surface area, TGA, EDS and elemental analysis, and the results showed that the functionalization of the sorbent materials was successful.The efficiency of bis-benzimidazole derivatives and quaternary diammonium cations, respectively, were investigated in a column study under dynamic flow adsorption conditions. The adsorption kinetics and isotherms were investigated under batch conditions and fitted on pseudo-first-order and pseudo-second-order model, and Freundlich and Langmuir isotherm, respectively. It was observed that the bis-benzimidazole derivatives showed uptake of [RhCl3(H2O)3], and the loading capacities were observed in the following order; NSN1 (181.06 mg/g) > NSN2 (148.55 mg/g) > NNN1 (131.88 mg/g) > NNN2 (75.87 mg/g). The bis-benzimidazole derivatives preference for metal ions was further investigated with a multi-element solution containing Rh(III), Ir(III), Pt(II), Pd(II) and Ni(II). The bis-benzimidazole derivatives showed the following order of loading capacity: NSN1 (47.28 mg/g) > NSN2 (23.89 mg/g) > NNN1 (17.47 mg/g) > NNN2 (14.91 mg/g) for Rh(III); NSN2 (10.64 mg/g) > NNN2 (6.84 mg/g) > NSN1 (5.74 mg/g) > NNN1 (5.02 mg/g) for Ir(III); NNN2 (33.96 mg/g) > NSN1 (30.95 mg/g) > NSN2 (19.95 mg/g) > NNN1 (14.92 mg/g) for Pt(II); NNN1 (47.94 mg/g) > NNN2 (28.90 mg/g) > NSN1 (16.22 mg/g) > NSN2 (15.83 mg/g) for Pd(II). Bis-benzimidazole derivatives showed no uptake of nickel(II) under these conditions. It was observed the ligand-selectivity order for Rh(III) was similar in both single-element and multi-element studies. This order showed that the bis-benzimidazoles containing a sulfur atom showed a high preference for rhodium(III) compared to Pt(II) which had a high preference for NNN2 as well as Pd(II) which had a high preference for NNN1. Ir(III) generally had a lower preference for the ligands presumably due to its higher kinetic inertness compared with Rh(III). Column sorption of [IrCl6]2- and [RhCl5(H2O)]2- on nanofibers functionalized with diammonium cations was carried out and the loading capacities of [IrCl6]2- were obtained. [RhCl5(H2O)]2- was not adsorbed by the sorbent materials while [IrCl6]2- was loaded onto the column. The loading capacities of [IrCl6]2- with the quaternary diammonium sorbent materials increased in the order of F-QuatDMDAMeBnz (60.29 mg/g) < F-QuatDMDABnz (67.61 mg/g) < F-QuatDMDACF3Bnz (107.59 mg/g) < F-QuatDMDANO2Bnz (140.47 mg/g). The loading capacity for Ir(IV) with quaternary diammonium cationic nanofibers increased with an increase in the electron-withdrawing nature of the quaternizing group. The charge delocalizing ability of the nitrobenzyl group resulted in the best interaction of the diammonium cation with [IrCl6]2-. Batch equilibrium studies were carried out to assess the efficiency of bis-benzimidazole chelating derivatives as adsorbents using a multi-metal solution (Rh(III), Ir(III), Pt(II), Pd(II) and Ni(II)) in 0.5 M HCl. The efficiency of the quaternary diammonium cations was tested using a binary metal solution (Ir(IV) and Rh(III)) in 6 M HCl. The isothermal batch adsorption studies of a multi-metal solution with bis-benzimidazoles derivatives fitted the Langmuir isotherm model which confirmed monolayer adsorption onto a homogeneous surface. The Langmuir isotherm parameter (qe (mg/g)), using functionalized nanofibers, showed the order of NNN2 (128.21 mg/g) > NSN1 (99.01 mg/g) > NSN2 (91.74 mg/g) > NNN1 (84.03 mg/g) for Pt(II); NNN1 (66.23 mg/g) > NNN2 (5.89 mg/g) > NSN1 (1.40 mg/g) > NSN2 (0.59 mg/g) for Pd(II); NSN2 (10.64 mg/g) > NNN2 (6.84 mg/g) > NSN1 (5.74 mg/g) > NNN1 (5.02 mg/g) for Ir(III); NSN1 (140.85 mg/g) > NSN2 (109.89 mg/g) > NNN1 (104.17 mg/g) > NNN2 (91.74 mg/g) for Rh(III). The pseudo-first-order kinetics model was found to be the best fit to describe the adsorption kinetics of all metal ions onto all the sorbent materials. K1 (min-1) value in pseudo-first-order kinetics showed the same order of adsorption as observed in the Langmuir isotherms. The isothermal batch adsorption studies of [IrCl6]2- and [RhCl5(H2O)]2- with quaternary diammonium cations fitted the Freundlich isotherm model and confirmed to be effective for multiple-layered adsorption onto a heterogeneous surface. The Freundlich isotherm parameter (kf (mg/g)) using functionalized quaternary diammonium cationic nanofibers increased in the order of F-QuatDMDANO2Bnz (794.33 mg/g) > F-QuatDMDACF3Bnz (185.35 mg/g) > F-QuatDMDABnz (156.32 mg/g) > F-QuatDMDAMeBnz (112.46 mg/g) for Ir(IV) uptake. F-QuatDMDANO2Bnz resin showed the highest adsorption than that of F-QuatDMDAMeBnz, F-QuatDMDABnz and F-QuatDMDACF3Bnz and this order is similar to what was observed in column studies. The quaternary diammonium cations were shown to have the highest adsorption capacity for Ir(IV) compared with Rh(III). The adsorption of Rh(III) was also observed to increase in the order of F-QuatDMDANO2Bnz (177.83 mg/g) > F-QuatDMDACF3Bnz (40.37 mg/g) > F-QuatDMDABnz (36.98 mg/g) > F-QuatDMDAMeBnz (12.71 mg/g). The pseudo-second-order kinetic model was found to be the best fit to describe the adsorption kinetics of both metal ions onto all the sorbent materials. K2 (g.mg-1min-1) value in pseudo-second-order kinetics showed the same order of adsorption as observed in the Freundlich isotherms. The adsorption studies showed adsorption takes place via chemisorption process. This thesis presents PGMs and iridium-specific materials that could be applied in solutions of secondary PGMs sources containing rhodium, platinum and palladium with bis-benzimidazoles as well as in feed solutions from ore processing with diammonium cations for iridium recovery.
- Format
- xxxii, 238 leaves
- Format
- Publisher
- Nelson Mandela University
- Publisher
- Faculty of Science
- Language
- English
- Rights
- Nelson Mandela University
- Hits: 1521
- Visitors: 1577
- Downloads: 238
Collections
NMU School of BioMolecular and Chemical Sciences
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | SOURCE1 | Pulleng Moleko-Boyce.pdf | 5 MB | Adobe Acrobat PDF | View Details Download |