- Title
- Evaluation of pre-treatment methods on production of bioethanol from bagasse and sugarcane trash
- Creator
- Dodo, Charlie Marembo
- Subject
- Lignocellulose
- Date Issued
- 2019
- Date
- 2019
- Type
- Thesis
- Type
- Doctoral
- Type
- PhD
- Identifier
- http://hdl.handle.net/10353/15387
- Identifier
- vital:40403
- Description
- A variety of methods have been researched on for bioethanol preparation from different feedstocks. Amongst the available feedstock, one such feedstock is the sugarcane plant. In most of the research on bioethanol preparation with sugarcane the sugary juice has been widely used, with the bagasse and trash having been discarded as waste. The “waste” bagasse and trash are usually removed and thrown away or burnt during harvesting or in sugar mills to supplement energy requirements. This research on lignocellulosic bagasse and trash was done so as not to discard them but to rather find ways in which to use this biomass constructively. Alternatives to burning that can potentially add value to this biomass need to be researched on by evaluating their hydrolysis content. The different lignocellulose pretreatment methods of concentrated and dilute acid pretreatment, with subsequent enzyme hydrolysis as well as alkali and oxidative alkali pretreatment with enzyme hydrolysis were experimented on the bagasse and trash for hydrolysis efficiency and effectiveness. There are two types of acid hydrolysis which were investigated on which are concentrated and dilute sulphuric acid pretreatments. Use of concentrated sulphuric acid yielded the highest amounts of reducing sugars but also resulted in the highest amounts of downstream process inhibitors formation. This resulted in the need for neutralisation steps which in turn increase the overall costs of using this method to obtain reducing sugars. It has however the advantage of occurring at a faster rate, within minutes or hours, than using biological enzymes which took days, up to 72 hours to obtain the highest reducing sugar amounts. Dilute sulphuric acid pretreatment offered the advantage of using fewer chemicals which are therefore less severe on equipment and result in fewer fermentation inhibitors being formed. Dilute sulphuric acid hydrolysis also takes a relatively shorter period than biological methods of pretreatment. A challenge of fermentation inhibitors formed during acid hydrolysis was countered by using the methods of overliming (calcium hydroxide) and comparing it to neutralization with sodium hydroxide. Alkali pretreatment with sodium hydroxide was researched on by applying different pretreatment concentrations during experiments on the lignocellulosic biomass. There was an increase in the available quantities of cellulose with a significant reduction in lignin with pretreatment. Alkali pretreatment proved effective in exposing the cellulose which made v more cellulose surface area available to cellulase enzymes for enzyme hydrolysis. The highest yield of reducing sugars was obtained from hydrolysates pretreated with 0.25 M sodium hydroxide for 60 min and a period of 72 h of enzyme hydrolysis. In general the longer the pretreatment time the more reducing sugars were produced from the enzyme hydrolysis. Alkali peroxide pretreatment also resulted in significant reductions in lignin quantities of lignocellulose material. In this method sodium hydroxide in combination with hydrogen peroxide were used in pretreating the biomass. Hydrolysates with even fewer fermentation inhibitors were produced as a result. The highest percentage concentration of cellulose of 63% (g/g) was achieved after pretreatment of bagasse with 5% alkali hydrogen peroxide and trash with 0,25M sodium hydroxide pretreatment. Pretreatment of biomass using alkali with subsequent enzymatic hydrolysis gave the highest yields of fermentable sugars of 38% (g/g) using 7% (v/v) alkali peroxide pre-treated trash than 36% (g/g) for 5% (v/v) with the least inhibitors. Reducing sugar yields of 25% (g/g) and 22% (g/g) were obtained after pretreatment with concentrated and dilute acid respectively. Neutralization of the acid hydrolysates was necessary to reduce inhibitors formed with neutralisation by sodium hydroxide resulting in low dilutions and loss of fermentable sugars as unlike in the case of overliming. Subsequent steps of fermenting the reducing sugars resulting from pretreatment into bioethanol were based on using the yeast Saccharomyces cerevisae. Pretreatment hydrolysates from alkali peroxide experiments produced higher bioethanol yields of 13.7 (g/l) after enzyme hydrolysates versus 6.9 (g/l) bioethanol from dilute acid hydrolyzates. A comparison of the effects of time showed there was more bioethanol yield of 13.7 (g/l) after 72 h of fermentation with the yeast versus 7.0 (g/l) bioethanol after pretreatment for 24 h. The only drawback is the longer fermentation period which thus reduces the process and so reduces the value of the increase in yield
- Format
- 192 leaves
- Format
- Publisher
- University of Fort Hare
- Publisher
- Faculty of Science and Agriculture
- Language
- English
- Rights
- University of Fort Hare
- Hits: 1442
- Visitors: 1411
- Downloads: 97
Collections
UFH Department of Chemistry
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | SOURCE1 | PhD Thesis (DODO).pdf | 8 MB | Adobe Acrobat PDF | View Details Download |