- Title
- Development of thick section friction stir welding using a sliding tool shoulder
- Creator
- Chetty, Shamalin
- Subject
- Friction welding
- Date Issued
- 2013
- Date
- 2013
- Type
- Thesis
- Type
- Masters
- Type
- MTech
- Identifier
- vital:9633
- Identifier
- http://hdl.handle.net/10948/d1015081
- Description
- Sliding shoulder friction stir welding (SSFSW) is an alternative joining technique to the conventional friction stir welding process. The welding mechanism comprises of a rotating probe and a non-rotating shoulder. The shoulder therefore does not contribute to any heat generation or plastic deformation. When welding thicker section material, the contribution of heat generation from the shoulder becomes less significant and most of the heat and plastic deformation must be generated by the tool probe. For this reason it was decided to develop the process for thick section AA6082-T6. Due to the stationary (non-rotating) shoulder the weld track is smooth and there is no reduction in cross-sectional area. This research is based on the development of a sliding shoulder friction stir welding tool with the ability to create joints of up to 25mm thick on aluminium alloy 6082-T6 plate as well as the associated process development. The sliding shoulder friction stir welding tool was designed, manufactured and tested by initially performing partial penetration welds with various size tool probes and then finally by performing a sliding shoulder friction stir butt weld on 25mm thick plate. As welds were performed and more knowledge gained about the process, design modifications were made. These included varying the clearance between the tool probe and stationary shoulder; the profile of the shoulder which contributes to material flow during the process; and supporting the tool probe to prevent deflection when welding thicker sections at high forge forces. From the sliding shoulder friction stir welds performed, an understanding of material flow during the process was gained when analysing the macro-sections and exit holes of the welds. Typical process forces and torques associated with the process were measured to assist with future head unit and tool designs with regard to sliding shoulder friction stir welding.
- Format
- xii, 112 leaves
- Format
- Publisher
- Nelson Mandela Metropolitan University
- Publisher
- Faculty of Engineering, the Built Environment and Information Technology
- Language
- English
- Rights
- Nelson Mandela Metropolitan University
- Hits: 1143
- Visitors: 1305
- Downloads: 228
Collections
NMMU School of Engineering
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | SOURCEPDF | 11 MB | Adobe Acrobat PDF | View Details Download |