A facilities management transformation strategy for the public sector
- Authors: Tonono, Erol
- Date: 2008
- Subjects: Facility management -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:9666 , http://hdl.handle.net/10948/767 , Facility management -- South Africa
- Description: Facilities Management (FM) has become one of the fastest growing disciplines in the built environment. Factors such as information technology, expectations of employees, the cost of mistakes in building, the cost of building space and global competition have influenced the growth of the discipline. These factors have forced facilities management to move from the basement to the boardroom; from a hidden function entrusted to the sleepy, slow and steady to one performed by increasingly bright-eyed and dynamic facilities managers. The objectives of this research focus on the need for a transformation strategy for FM in the public sector. However, before any transformation is considered, it is essential to understand the perceptions and attitudes of people dealing with FM in this sector. The National Department of Public Works (NDPW) became the focus of the study because it has the largest property portfolio in the southern hemisphere. It should be the leader in FM. The collected primary data (being quantitative) and secondary information provided the necessary basis to understand the application of FM in the NDPW. The study revealed shortcomings which are contributing to the problems outlined: namely, that no senior manager has been appointed to manage the portfolio and assist top management in decision-making; that neither a policy nor a FM framework are in place to guide the FM portfolio; that there is a lack of knowledge about the discipline, particularly by management and that there is no computer-aided FM in the entire department, let alone a FM helpdesk. FM is the coordination of workplace, people, physical infrastructure, processes and technology in order for an organization to meet its objectives. It is a wide field encompassing models that tend to differ considerably from one organization to another as it has to respond to the particular needs of each organization. It recognizes that a workplace’s configuration can have either a positive or negative impact on productivity, depending on the competency of the FM structures in place.
- Full Text:
- Date Issued: 2008
- Authors: Tonono, Erol
- Date: 2008
- Subjects: Facility management -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:9666 , http://hdl.handle.net/10948/767 , Facility management -- South Africa
- Description: Facilities Management (FM) has become one of the fastest growing disciplines in the built environment. Factors such as information technology, expectations of employees, the cost of mistakes in building, the cost of building space and global competition have influenced the growth of the discipline. These factors have forced facilities management to move from the basement to the boardroom; from a hidden function entrusted to the sleepy, slow and steady to one performed by increasingly bright-eyed and dynamic facilities managers. The objectives of this research focus on the need for a transformation strategy for FM in the public sector. However, before any transformation is considered, it is essential to understand the perceptions and attitudes of people dealing with FM in this sector. The National Department of Public Works (NDPW) became the focus of the study because it has the largest property portfolio in the southern hemisphere. It should be the leader in FM. The collected primary data (being quantitative) and secondary information provided the necessary basis to understand the application of FM in the NDPW. The study revealed shortcomings which are contributing to the problems outlined: namely, that no senior manager has been appointed to manage the portfolio and assist top management in decision-making; that neither a policy nor a FM framework are in place to guide the FM portfolio; that there is a lack of knowledge about the discipline, particularly by management and that there is no computer-aided FM in the entire department, let alone a FM helpdesk. FM is the coordination of workplace, people, physical infrastructure, processes and technology in order for an organization to meet its objectives. It is a wide field encompassing models that tend to differ considerably from one organization to another as it has to respond to the particular needs of each organization. It recognizes that a workplace’s configuration can have either a positive or negative impact on productivity, depending on the competency of the FM structures in place.
- Full Text:
- Date Issued: 2008
A hybrid approach to beach erosion mitigation and amenity enhancement, St Francis Bay, South Africa
- Authors: Anderson, Dylan Rory
- Date: 2008
- Subjects: Beach erosion -- South Africa -- St Francis Bay , Shore protection -- South Africa -- St Francis Bay , Restoration ecology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10611 , http://hdl.handle.net/10948/d1008192 , Beach erosion -- South Africa -- St Francis Bay , Shore protection -- South Africa -- St Francis Bay , Restoration ecology
- Description: The St Francis Bay beach has experienced chronic erosion over the past three decades. This erosion can largely be attributed to the stabilisation of a large coastal dunefield which contributed +/- 80 percent of the sand supply to St Francis Bay. Stabilisation began in 1975 initially using plant cuttings and followed by the development of the Santareme holiday suburb resulting in complete stabilisation by 1985. Effects were felt from the late 1970‟s and since then the beach has retreated at between 0.5 - 3 m.yr-1. Erosion has encroached on beachfront properties since the early 1990‟s, leading to the placement of 3-4 m high unsightly rock revetments along much of the beach. Where properly maintained these structures have proved successful in protecting the properties behind, however exacerbated erosion of areas in front and adjacent to these structures is evident. Currently no dry beach is present at high tide for most of the year, leading to a significant reduction in beach amenity value. Several technical studies to investigate remediation of this beach erosion problem have been conducted since the early 1990‟s. This study includes investigations into the processes and dynamics of the existing environment and evaluation of the effectiveness and impacts of several elements of a hybrid approach to coastal protection and amenity enhancement for St Francis Bay beach. This proposal incorporated: Multi-Purpose Reefs (MPR‟s) offshore, for coastal protection and amenity enhancement in terms of surfing; beach nourishment with sand from the Kromme Estuary and dune rehabilitation with appropriate native sand binding species. Extensive fieldwork and data collection were conducted, this included: a series of bathymetric surveys; diving surveys and a helicopter flight; sediment sampling; beach profiling and deployment of a wave/current meter. Analysis of these data provided a greater understanding of the existing environment and dynamics of St Francis Bay and provided reliable inputs for numerical modelling. Numerical and physical modelling was conducted to assess the existing processes and conduct MPR design testing. In addition calibrated hydrodynamic modelling of the Kromme Estuary was conducted in order to assess the impacts of sand extraction from the large sand banks within the mouth of the Kromme Estuary for use as beach nourishment. Comparison of bathymetric survey data collected by the author in 2005/06 with survey data collected by the South African Navy Hydrographic Office (SANHO) in 1952 suggest a major loss of sand from the bay, with a volume difference of some 8.8 X 106 m3 calculated. Greater losses were measured between 10-15 m water depths, with shallow areas of +/- 5 m water depth, remaining more stable. This can be attributed to the presence of shallow reef and rocky substrate through much of the bay at this depth range. Monthly RTK GPS survey data from September 2006 to September 2007 indicates a total loss of 40 000 m3 over this period with the greatest losses measured along the northern part of the beach. The greatest losses were measured after large long period waves from a southerly to south-easterly direction occurred in conjunction with equinox tides in mid March 2007. Sediment sampling at over 100 locations within the bay indicated a high percentage of reef (26 percent) and fairly consistent grain size in the fine to medium size class throughout much of the beach, bay and large sand bank within the estuary. While the majority of the South African Coast is exposed to the predominant south westerly winds and waves, St Francis Bay‟s orientation means that waves from a south easterly to easterly direction dominate. The results of the detailed numerical modelling of the hydrodynamics agree with previous calculations and modelling results which concluded that strong unidirectional longshore currents occur along the headland due to the oblique angle of wave incidence and the close to parallel angle of wave incidence along the beach leads to weak longshore currents of variable direction. Erosion along St Francis Bay beach is a result of cross-shore erosion due to large waves from a southerly to easterly direction. Detached breakwaters are the most effective form of coastal protection in these environments and MPR‟s offer additional benefits over traditional breakwater structures. Results of empirical calculations and numerical modelling indicate that the MPR‟s will provide effective coastal protection through the processes of wave dissipation, wave rotation, salient formation and alteration of nearshore circulation. Physical modelling results allowed the MPR design to be assessed and refined in terms of surfing amenity enhancement and construction constraints. In addition numerical modelling results indicate that impacts due to the extraction of up to 600 000 m3 of sand from the lower Kromme Estuary result in highly localised velocity reduction, mainly limited to the extraction areas. The calculated rate of sediment influx into the lower Kromme Estuary indicates that limited extraction, in the order of 20 000 – 40 000 m3 per year, should be sustainable in the long term. Sedimentation of the lower estuary over recent years has had negative recreational and ecological impacts, through reduced navigability and water exchange respectively. Therefore both the estuary and beach systems prove to benefit from this approach. Although not investigated in detail as part of this study, evidence from numerous projects worldwide indicates that foredunes help to trap wind-blown sand on the beach and form a buffer to storm erosion, therefore dune rehabilitation with native sand-binding plant species was recommended as the third element of the proposed remediation of St Francis Bay beach.
- Full Text:
- Date Issued: 2008
- Authors: Anderson, Dylan Rory
- Date: 2008
- Subjects: Beach erosion -- South Africa -- St Francis Bay , Shore protection -- South Africa -- St Francis Bay , Restoration ecology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10611 , http://hdl.handle.net/10948/d1008192 , Beach erosion -- South Africa -- St Francis Bay , Shore protection -- South Africa -- St Francis Bay , Restoration ecology
- Description: The St Francis Bay beach has experienced chronic erosion over the past three decades. This erosion can largely be attributed to the stabilisation of a large coastal dunefield which contributed +/- 80 percent of the sand supply to St Francis Bay. Stabilisation began in 1975 initially using plant cuttings and followed by the development of the Santareme holiday suburb resulting in complete stabilisation by 1985. Effects were felt from the late 1970‟s and since then the beach has retreated at between 0.5 - 3 m.yr-1. Erosion has encroached on beachfront properties since the early 1990‟s, leading to the placement of 3-4 m high unsightly rock revetments along much of the beach. Where properly maintained these structures have proved successful in protecting the properties behind, however exacerbated erosion of areas in front and adjacent to these structures is evident. Currently no dry beach is present at high tide for most of the year, leading to a significant reduction in beach amenity value. Several technical studies to investigate remediation of this beach erosion problem have been conducted since the early 1990‟s. This study includes investigations into the processes and dynamics of the existing environment and evaluation of the effectiveness and impacts of several elements of a hybrid approach to coastal protection and amenity enhancement for St Francis Bay beach. This proposal incorporated: Multi-Purpose Reefs (MPR‟s) offshore, for coastal protection and amenity enhancement in terms of surfing; beach nourishment with sand from the Kromme Estuary and dune rehabilitation with appropriate native sand binding species. Extensive fieldwork and data collection were conducted, this included: a series of bathymetric surveys; diving surveys and a helicopter flight; sediment sampling; beach profiling and deployment of a wave/current meter. Analysis of these data provided a greater understanding of the existing environment and dynamics of St Francis Bay and provided reliable inputs for numerical modelling. Numerical and physical modelling was conducted to assess the existing processes and conduct MPR design testing. In addition calibrated hydrodynamic modelling of the Kromme Estuary was conducted in order to assess the impacts of sand extraction from the large sand banks within the mouth of the Kromme Estuary for use as beach nourishment. Comparison of bathymetric survey data collected by the author in 2005/06 with survey data collected by the South African Navy Hydrographic Office (SANHO) in 1952 suggest a major loss of sand from the bay, with a volume difference of some 8.8 X 106 m3 calculated. Greater losses were measured between 10-15 m water depths, with shallow areas of +/- 5 m water depth, remaining more stable. This can be attributed to the presence of shallow reef and rocky substrate through much of the bay at this depth range. Monthly RTK GPS survey data from September 2006 to September 2007 indicates a total loss of 40 000 m3 over this period with the greatest losses measured along the northern part of the beach. The greatest losses were measured after large long period waves from a southerly to south-easterly direction occurred in conjunction with equinox tides in mid March 2007. Sediment sampling at over 100 locations within the bay indicated a high percentage of reef (26 percent) and fairly consistent grain size in the fine to medium size class throughout much of the beach, bay and large sand bank within the estuary. While the majority of the South African Coast is exposed to the predominant south westerly winds and waves, St Francis Bay‟s orientation means that waves from a south easterly to easterly direction dominate. The results of the detailed numerical modelling of the hydrodynamics agree with previous calculations and modelling results which concluded that strong unidirectional longshore currents occur along the headland due to the oblique angle of wave incidence and the close to parallel angle of wave incidence along the beach leads to weak longshore currents of variable direction. Erosion along St Francis Bay beach is a result of cross-shore erosion due to large waves from a southerly to easterly direction. Detached breakwaters are the most effective form of coastal protection in these environments and MPR‟s offer additional benefits over traditional breakwater structures. Results of empirical calculations and numerical modelling indicate that the MPR‟s will provide effective coastal protection through the processes of wave dissipation, wave rotation, salient formation and alteration of nearshore circulation. Physical modelling results allowed the MPR design to be assessed and refined in terms of surfing amenity enhancement and construction constraints. In addition numerical modelling results indicate that impacts due to the extraction of up to 600 000 m3 of sand from the lower Kromme Estuary result in highly localised velocity reduction, mainly limited to the extraction areas. The calculated rate of sediment influx into the lower Kromme Estuary indicates that limited extraction, in the order of 20 000 – 40 000 m3 per year, should be sustainable in the long term. Sedimentation of the lower estuary over recent years has had negative recreational and ecological impacts, through reduced navigability and water exchange respectively. Therefore both the estuary and beach systems prove to benefit from this approach. Although not investigated in detail as part of this study, evidence from numerous projects worldwide indicates that foredunes help to trap wind-blown sand on the beach and form a buffer to storm erosion, therefore dune rehabilitation with native sand-binding plant species was recommended as the third element of the proposed remediation of St Francis Bay beach.
- Full Text:
- Date Issued: 2008
Adaptive user interfaces for mobile map-based visualisation
- Authors: Van Tonder, Bradley Paul
- Date: 2008
- Subjects: Cartography , Maps -- Design , Digital mapping , Geographic information systems , User interfaces (Computer systems) -- Design
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10470 , http://hdl.handle.net/10948/866 , Cartography , Maps -- Design , Digital mapping , Geographic information systems , User interfaces (Computer systems) -- Design
- Description: Mobile devices today frequently serve as platforms for the visualisation of map-based data. Despite the obvious advantages, mobile map-based visualisation (MMV) systems are often difficult to design and use. Limited screen space, resource constraints and awkward interaction mechanisms are among the many problems with which designers and users have to contend. Adaptive user interfaces (AUIs), which adapt to the individual user, represent a possible means of addressing the problems of MMV. Adaptive MMV systems are, however, generally designed in an ad-hoc fashion, making the benefits achieved difficult to replicate. In addition, existing models for adaptive MMV systems are either conceptual in nature or only address a subset of the possible input variables and adaptation effects. The primary objective of this research was to develop and evaluate an adaptive MMV system using a model-based approach. The Proteus Model was proposed to support the design of MMV systems which adapt in terms of information, visualisation and user interface in response to the user‟s behaviour, tasks and context. The Proteus Model describes the architectural, interface, data and algorithm design of an adaptive MMV system. A prototype adaptive MMV system, called MediaMaps, was designed and implemented based on the Proteus Model. MediaMaps allows users to capture, location-tag, organise and visualise multimedia on their mobile phones. Information adaptation is performed through the use of an algorithm to assist users in sorting media items into collections based on time and location. Visualisation adaptation is performed by adapting various parameters of the map-based visualisations according to user preferences. Interface adaptation is performed through the use of adaptive lists. An international field study of MediaMaps was conducted in which participants were required to use MediaMaps on their personal mobile phones for a period of three weeks. The results of the field study showed that high levels of accuracy were achieved by both the information and interface adaptations. High levels of user satisfaction were reported, with participants rating all three forms of adaptation as highly useful. The successful implementation of MediaMaps provides practical evidence that the model-based design of adaptive MMV systems is feasible. The positive results of the field study clearly show that the adaptations implemented were highly accurate and that participants found these adaptations to be useful, usable and easy to understand. This research thus provides empirical evidence that the use of AUIs can provide significant benefits for the visualisation of map-based information on mobile devices.
- Full Text:
- Date Issued: 2008
- Authors: Van Tonder, Bradley Paul
- Date: 2008
- Subjects: Cartography , Maps -- Design , Digital mapping , Geographic information systems , User interfaces (Computer systems) -- Design
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10470 , http://hdl.handle.net/10948/866 , Cartography , Maps -- Design , Digital mapping , Geographic information systems , User interfaces (Computer systems) -- Design
- Description: Mobile devices today frequently serve as platforms for the visualisation of map-based data. Despite the obvious advantages, mobile map-based visualisation (MMV) systems are often difficult to design and use. Limited screen space, resource constraints and awkward interaction mechanisms are among the many problems with which designers and users have to contend. Adaptive user interfaces (AUIs), which adapt to the individual user, represent a possible means of addressing the problems of MMV. Adaptive MMV systems are, however, generally designed in an ad-hoc fashion, making the benefits achieved difficult to replicate. In addition, existing models for adaptive MMV systems are either conceptual in nature or only address a subset of the possible input variables and adaptation effects. The primary objective of this research was to develop and evaluate an adaptive MMV system using a model-based approach. The Proteus Model was proposed to support the design of MMV systems which adapt in terms of information, visualisation and user interface in response to the user‟s behaviour, tasks and context. The Proteus Model describes the architectural, interface, data and algorithm design of an adaptive MMV system. A prototype adaptive MMV system, called MediaMaps, was designed and implemented based on the Proteus Model. MediaMaps allows users to capture, location-tag, organise and visualise multimedia on their mobile phones. Information adaptation is performed through the use of an algorithm to assist users in sorting media items into collections based on time and location. Visualisation adaptation is performed by adapting various parameters of the map-based visualisations according to user preferences. Interface adaptation is performed through the use of adaptive lists. An international field study of MediaMaps was conducted in which participants were required to use MediaMaps on their personal mobile phones for a period of three weeks. The results of the field study showed that high levels of accuracy were achieved by both the information and interface adaptations. High levels of user satisfaction were reported, with participants rating all three forms of adaptation as highly useful. The successful implementation of MediaMaps provides practical evidence that the model-based design of adaptive MMV systems is feasible. The positive results of the field study clearly show that the adaptations implemented were highly accurate and that participants found these adaptations to be useful, usable and easy to understand. This research thus provides empirical evidence that the use of AUIs can provide significant benefits for the visualisation of map-based information on mobile devices.
- Full Text:
- Date Issued: 2008
An adaptive user interface model for contact centres
- Authors: Jason, Bronwin Anastasia
- Date: 2008
- Subjects: Call centers -- Management , Customer services -- Management , Call centers -- Customer services
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10467 , http://hdl.handle.net/10948/989 , Call centers -- Management , Customer services -- Management , Call centers -- Customer services
- Description: Contact centres (CC), are the primary interaction point between a company and its customers and these are rapidly expanding in terms of both workforce and economic scope. An important challenge for today's CC solutions is to increase the speed at which CCAs retrieve information to answer customer queries. CCAs, however, differ in their ability to respond to these queries and do not interact with the computer user interface (UI) in the same way as they each have different capabilities, experience and expertise. Studies have provided empirical support that user performance can be increased when the computer UI characteristics match the user skill level. Adaptive user interfaces (AUIs) are the key to creating personalised systems. Their sole task is to provide an interface most suitable to users' needs whilst facilitating the users' varying skill levels. The aim of this research was to develop an AUI model for CCs to support and improve the expertise level of CCAs. A literature review of CCs, user expertise, AUIs and existing AUI models resulted in the proposal of an AUI model for CCs. The proposed AUI model was described in terms of its architecture, component-level and interface design. An AUI prototype was developed as a proof-of-concept of the proposed AUI model. A literature review on existing AUI evaluation approaches resulted in an evaluation strategy for the proposed AUI model. The AUI prototype was evaluated according to the evaluation strategy that was identified. User testing incorporating eye-tracking and a post-test questionnaire was used to determine the usefulness and usability of the AUI prototype. Significant results were found with regards to user satisfaction ratings, the learnability of the AUI prototype and its effectiveness. This dissertation makes an important contribution in the design of an AUI model that supports and improves the expertise level of CCAs. The model could be used to assist the development of CC applications incorporating AUIs. Future research is however needed to evaluate the effect of the proposed AUI model in a larger CC environment.
- Full Text:
- Date Issued: 2008
- Authors: Jason, Bronwin Anastasia
- Date: 2008
- Subjects: Call centers -- Management , Customer services -- Management , Call centers -- Customer services
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10467 , http://hdl.handle.net/10948/989 , Call centers -- Management , Customer services -- Management , Call centers -- Customer services
- Description: Contact centres (CC), are the primary interaction point between a company and its customers and these are rapidly expanding in terms of both workforce and economic scope. An important challenge for today's CC solutions is to increase the speed at which CCAs retrieve information to answer customer queries. CCAs, however, differ in their ability to respond to these queries and do not interact with the computer user interface (UI) in the same way as they each have different capabilities, experience and expertise. Studies have provided empirical support that user performance can be increased when the computer UI characteristics match the user skill level. Adaptive user interfaces (AUIs) are the key to creating personalised systems. Their sole task is to provide an interface most suitable to users' needs whilst facilitating the users' varying skill levels. The aim of this research was to develop an AUI model for CCs to support and improve the expertise level of CCAs. A literature review of CCs, user expertise, AUIs and existing AUI models resulted in the proposal of an AUI model for CCs. The proposed AUI model was described in terms of its architecture, component-level and interface design. An AUI prototype was developed as a proof-of-concept of the proposed AUI model. A literature review on existing AUI evaluation approaches resulted in an evaluation strategy for the proposed AUI model. The AUI prototype was evaluated according to the evaluation strategy that was identified. User testing incorporating eye-tracking and a post-test questionnaire was used to determine the usefulness and usability of the AUI prototype. Significant results were found with regards to user satisfaction ratings, the learnability of the AUI prototype and its effectiveness. This dissertation makes an important contribution in the design of an AUI model that supports and improves the expertise level of CCAs. The model could be used to assist the development of CC applications incorporating AUIs. Future research is however needed to evaluate the effect of the proposed AUI model in a larger CC environment.
- Full Text:
- Date Issued: 2008
An investigation of training and mentoring of emerging contractors in the Eastern Cape
- Authors: Moss, Ian
- Date: 2008
- Subjects: Construction industry -- South Africa , Mentoring
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:9680 , http://hdl.handle.net/10948/1630 , Construction industry -- South Africa , Mentoring
- Description: The first democratically elected government in South Africa came into power in 1994 and with this the whole country faced changes and new challenges. The construction industry faced the challenge of incorporating and empowering previously disadvantaged people that were part of the industry as well as new emerging contractors that entered the industry. Various training and mentoring programmes were initiated by government as well as quasi-government institutions which attempted to address these challenges. Having an effective mentoring programme in place in the construction industry is critical to the development and growth of the emerging contractors as well as the industry as a whole. This research focuses on a specific programme to establish if the need for training and mentoring programmes exist and which specific aspects of the training need the most attention. The study furthermore, investigates the effect the programme had on emerging contractors on the specific programme. Primary data was collected by means of a telephonic questionnaire to emerging contractors on the mentoring programme as well as the mentors and service providers of the programme. Secondary data was obtained from the literature reviewed and from relevant publications. The main findings were that a need for the training and mentoring of emerging contractors exists and the study emphasizes that there is a demand for the ongoing monitoring of emerging contractors after completion of the programme. The study furthermore reveals that all aspects of the training and mentoring programme is important but more time and effort should be spent on the management and financial aspects of the programme The research is limited to emerging contractors and mentors who participated in the East Cape Development Corporation (ECDC) mentoring programme in the Eastern Cape and is limited to two specific regions namely Port Elizabeth and East London. The findings from the study could be used by training providers as well as mentors to enhance the existing programme to ensure proper rounding of the emerging contractors.
- Full Text:
- Date Issued: 2008
- Authors: Moss, Ian
- Date: 2008
- Subjects: Construction industry -- South Africa , Mentoring
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:9680 , http://hdl.handle.net/10948/1630 , Construction industry -- South Africa , Mentoring
- Description: The first democratically elected government in South Africa came into power in 1994 and with this the whole country faced changes and new challenges. The construction industry faced the challenge of incorporating and empowering previously disadvantaged people that were part of the industry as well as new emerging contractors that entered the industry. Various training and mentoring programmes were initiated by government as well as quasi-government institutions which attempted to address these challenges. Having an effective mentoring programme in place in the construction industry is critical to the development and growth of the emerging contractors as well as the industry as a whole. This research focuses on a specific programme to establish if the need for training and mentoring programmes exist and which specific aspects of the training need the most attention. The study furthermore, investigates the effect the programme had on emerging contractors on the specific programme. Primary data was collected by means of a telephonic questionnaire to emerging contractors on the mentoring programme as well as the mentors and service providers of the programme. Secondary data was obtained from the literature reviewed and from relevant publications. The main findings were that a need for the training and mentoring of emerging contractors exists and the study emphasizes that there is a demand for the ongoing monitoring of emerging contractors after completion of the programme. The study furthermore reveals that all aspects of the training and mentoring programme is important but more time and effort should be spent on the management and financial aspects of the programme The research is limited to emerging contractors and mentors who participated in the East Cape Development Corporation (ECDC) mentoring programme in the Eastern Cape and is limited to two specific regions namely Port Elizabeth and East London. The findings from the study could be used by training providers as well as mentors to enhance the existing programme to ensure proper rounding of the emerging contractors.
- Full Text:
- Date Issued: 2008
Analysis of the extended defects in 3C-SiC
- Authors: Olivier, Ezra Jacobus
- Date: 2008
- Subjects: Crystals -- Defects , Crystallography , Silicon carbide
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10525 , http://hdl.handle.net/10948/730 , Crystals -- Defects , Crystallography , Silicon carbide
- Description: The dissertation focuses on the analysis of the extended defects present in as-grown and proton bombarded β-SiC (annealed and unannealed) grown by chemical vapour deposition (CVD) on (001) Si. The proton irradiation was done to a dose of 2.8 × 1016 protons/cm2 and the annealing took place at 1300°C and 1600°C for 1hr. The main techniques used for the analysis were transmission electron microscopy (TEM) and high resolution TEM (HRTEM). From the diffraction study of the material the phase of the SiC was confirmed to be the cubic beta phase with the zinc-blende structure. The main defects found in the β- SiC were stacking faults (SFs) with their associated partial dislocations and microtwins. The SFs were uniformly distributed throughout the foil. The SFs were identified as having a fault vector of the type 1/3 <111> with bonding partial dislocations of the type 1/6 <121> by using image simulation. The SFs were also found to be predominantly extrinsic in nature by using HRTEM analysis of SFs viewed edge-on. Also both bright and dar-field images of SFs on inclined planes exhibited symmetrical and complementary fringe contrast images. This is a result of the anomalous absorption ratio of SiC lying between that of Si and diamond. The analysis of the annealed and unannealed irradiated β-SiC yielded no evidence of radiation damage or change in the crystal structure of the β-SiC. This confirmed that β-SiC is a radiation resistant material. The critical proton dose for the creation of small dislocation loops seems to be higher than for other compound semiconductors with the zinc-blende structure.
- Full Text:
- Date Issued: 2008
- Authors: Olivier, Ezra Jacobus
- Date: 2008
- Subjects: Crystals -- Defects , Crystallography , Silicon carbide
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10525 , http://hdl.handle.net/10948/730 , Crystals -- Defects , Crystallography , Silicon carbide
- Description: The dissertation focuses on the analysis of the extended defects present in as-grown and proton bombarded β-SiC (annealed and unannealed) grown by chemical vapour deposition (CVD) on (001) Si. The proton irradiation was done to a dose of 2.8 × 1016 protons/cm2 and the annealing took place at 1300°C and 1600°C for 1hr. The main techniques used for the analysis were transmission electron microscopy (TEM) and high resolution TEM (HRTEM). From the diffraction study of the material the phase of the SiC was confirmed to be the cubic beta phase with the zinc-blende structure. The main defects found in the β- SiC were stacking faults (SFs) with their associated partial dislocations and microtwins. The SFs were uniformly distributed throughout the foil. The SFs were identified as having a fault vector of the type 1/3 <111> with bonding partial dislocations of the type 1/6 <121> by using image simulation. The SFs were also found to be predominantly extrinsic in nature by using HRTEM analysis of SFs viewed edge-on. Also both bright and dar-field images of SFs on inclined planes exhibited symmetrical and complementary fringe contrast images. This is a result of the anomalous absorption ratio of SiC lying between that of Si and diamond. The analysis of the annealed and unannealed irradiated β-SiC yielded no evidence of radiation damage or change in the crystal structure of the β-SiC. This confirmed that β-SiC is a radiation resistant material. The critical proton dose for the creation of small dislocation loops seems to be higher than for other compound semiconductors with the zinc-blende structure.
- Full Text:
- Date Issued: 2008
Aspects of the breeding biology of the African penguin on Bird Island, Algoa Bay
- Authors: Ralph, Mark Shaun
- Date: 2008
- Subjects: Penguins -- South Africa -- Conservation , Penguins -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10716 , http://hdl.handle.net/10948/840 , Penguins -- South Africa -- Conservation , Penguins -- South Africa
- Description: It is important to the survival of the Africa Penguin (Spheniscus demersus) population that breeding at the nest site is successful and that large numbers of chicks are fledged into the breeding population. Nest distribution on Bird Island is not random and locality preferences for breeding exist. Although it seems that sufficient area exists on Bird Island for penguin nests, it can hardly be considered as suitable to optimise breeding. During prolonged heat conditions, breeders relocated to nest sites that were sheltered. Nests that were below ground in burrows was the only habitat that did not suffer nest desertion whilst all the other habitat types (including those that were sheltered) experienced 2-3 fold declines in nest numbers. Nests density and the selection of suitable nest sites are significantly influenced by the stage of breeding that the majority of birds are in, yet nests that are shaded, well-ventilated and protected seem to be the most preferred sites for breeding. Adults that attempt to breed are considered then to be in a healthy condition and will usually lay a double clutch (Randell 1983). The frequency of double clutches being laid during the peak breeding attempt was significantly higher compared to the replacement one. Breeding failure was fairly similar to breeding success during the incubation stage for nests with double clutches however, was substantially higher in single clutches. The growth rate of chicks was best fit to the von Bertalanffy growth curve in 90 percent of the cases. The overall growth rate of chicks from double broods was faster than from single broods, however was not significant. A-chicks maitain a high growth rate until they fledged. Yet, the sibling B-chick recorded the lowest growth rate of the successfully fledged chicks and up to until day 30 recorded a similar weight to those chicks that failed to fledge. Contrary to findings of Randall (1983), chicks from single broods delayed fledging, recorded lowest overall growth rates and experienced the greatest weight loss of all groups, yet fledged successfully. In order for chicks to fledge successfully, they needed to obtain a weight of 1060 g before day 30.5 in their growth cycles to avoid death due to startvation later on. Single chicks that are raised from a double cluth, fledged more other than chicks raised from a single clutch. Unfit or ill-adapted breeders that are marginal in the capabilities of raising offspring, already manifest in a small clutch size and offspring unable to obtain adequate weights during the initial stages of growth.
- Full Text:
- Date Issued: 2008
- Authors: Ralph, Mark Shaun
- Date: 2008
- Subjects: Penguins -- South Africa -- Conservation , Penguins -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10716 , http://hdl.handle.net/10948/840 , Penguins -- South Africa -- Conservation , Penguins -- South Africa
- Description: It is important to the survival of the Africa Penguin (Spheniscus demersus) population that breeding at the nest site is successful and that large numbers of chicks are fledged into the breeding population. Nest distribution on Bird Island is not random and locality preferences for breeding exist. Although it seems that sufficient area exists on Bird Island for penguin nests, it can hardly be considered as suitable to optimise breeding. During prolonged heat conditions, breeders relocated to nest sites that were sheltered. Nests that were below ground in burrows was the only habitat that did not suffer nest desertion whilst all the other habitat types (including those that were sheltered) experienced 2-3 fold declines in nest numbers. Nests density and the selection of suitable nest sites are significantly influenced by the stage of breeding that the majority of birds are in, yet nests that are shaded, well-ventilated and protected seem to be the most preferred sites for breeding. Adults that attempt to breed are considered then to be in a healthy condition and will usually lay a double clutch (Randell 1983). The frequency of double clutches being laid during the peak breeding attempt was significantly higher compared to the replacement one. Breeding failure was fairly similar to breeding success during the incubation stage for nests with double clutches however, was substantially higher in single clutches. The growth rate of chicks was best fit to the von Bertalanffy growth curve in 90 percent of the cases. The overall growth rate of chicks from double broods was faster than from single broods, however was not significant. A-chicks maitain a high growth rate until they fledged. Yet, the sibling B-chick recorded the lowest growth rate of the successfully fledged chicks and up to until day 30 recorded a similar weight to those chicks that failed to fledge. Contrary to findings of Randall (1983), chicks from single broods delayed fledging, recorded lowest overall growth rates and experienced the greatest weight loss of all groups, yet fledged successfully. In order for chicks to fledge successfully, they needed to obtain a weight of 1060 g before day 30.5 in their growth cycles to avoid death due to startvation later on. Single chicks that are raised from a double cluth, fledged more other than chicks raised from a single clutch. Unfit or ill-adapted breeders that are marginal in the capabilities of raising offspring, already manifest in a small clutch size and offspring unable to obtain adequate weights during the initial stages of growth.
- Full Text:
- Date Issued: 2008
Characterization of polarization dependent loss in optical fibres and optical components in the presence of polarization mode dispersion
- Authors: Pelaelo, Gaoboelwe
- Date: 2008
- Subjects: Fiber optics , Polarization (Light)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10528 , http://hdl.handle.net/10948/695 , Fiber optics , Polarization (Light)
- Description: In this study, the Jones matrix eigenanalysis (JME), optical spectrum analyzer (OSA) and polarization scrambling methods were used to investigate polarization dependent loss (PDL) in the presence of polarization mode dispersion (PMD) in optical components and fibres. The PDL measurements were conducted both in the laboratory and in the field. For field measurements, a buried link (28.8 km) and an aerial fibre (7.1 km) were extensively studied. The findings obtained from these studies are very important for network operators who must assess the impact of PDL on the network reliability. The three different PDL measurement methods (JME, OSA and polarization scrambling) were compared and their PDL values were found to agree very well at the selected wavelength of 1550 nm. Concatenation of PDL components showed that as expected, PDL increase as the number of PDL components were added. The interactions between PMD and PDL measurements were analyzed. A PMD/PDL emulator was constructed. We observed that PMD decreased while PDL increased. The PMD decrease was a result of the PMD vector cancellation enhanced by the randomly distributed mode coupling angles while PDL increase was a result of each PM fibre segments contributing to the overall global PDL. It was observed that the presence of PMD in a link containing PDL, results in PDL being wavelength dependent and this resulted in the extraction of the PMD information from the PDL data. PDL was found to be Maxwellian distributed when considering low values of PMD. High PMD values resulted in the PDL distribution deviating from Maxwellian. Long-term PDL and PMD (average DGD) measurements indicated that the PDL and PMD varied slowly with time and wavelength for both the laboratory and field measurements. It was observed that the BER increase as both PDL and PMD increased for simulated optical link.
- Full Text:
- Date Issued: 2008
- Authors: Pelaelo, Gaoboelwe
- Date: 2008
- Subjects: Fiber optics , Polarization (Light)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10528 , http://hdl.handle.net/10948/695 , Fiber optics , Polarization (Light)
- Description: In this study, the Jones matrix eigenanalysis (JME), optical spectrum analyzer (OSA) and polarization scrambling methods were used to investigate polarization dependent loss (PDL) in the presence of polarization mode dispersion (PMD) in optical components and fibres. The PDL measurements were conducted both in the laboratory and in the field. For field measurements, a buried link (28.8 km) and an aerial fibre (7.1 km) were extensively studied. The findings obtained from these studies are very important for network operators who must assess the impact of PDL on the network reliability. The three different PDL measurement methods (JME, OSA and polarization scrambling) were compared and their PDL values were found to agree very well at the selected wavelength of 1550 nm. Concatenation of PDL components showed that as expected, PDL increase as the number of PDL components were added. The interactions between PMD and PDL measurements were analyzed. A PMD/PDL emulator was constructed. We observed that PMD decreased while PDL increased. The PMD decrease was a result of the PMD vector cancellation enhanced by the randomly distributed mode coupling angles while PDL increase was a result of each PM fibre segments contributing to the overall global PDL. It was observed that the presence of PMD in a link containing PDL, results in PDL being wavelength dependent and this resulted in the extraction of the PMD information from the PDL data. PDL was found to be Maxwellian distributed when considering low values of PMD. High PMD values resulted in the PDL distribution deviating from Maxwellian. Long-term PDL and PMD (average DGD) measurements indicated that the PDL and PMD varied slowly with time and wavelength for both the laboratory and field measurements. It was observed that the BER increase as both PDL and PMD increased for simulated optical link.
- Full Text:
- Date Issued: 2008
Characterization of polarization effects on deployed aerial optical fibre in South Africa
- Authors: Mudau, Azwitamisi Eric
- Date: 2008
- Subjects: Polarization (Light) , Fiber optics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10521 , http://hdl.handle.net/10948/1060 , Polarization (Light) , Fiber optics
- Description: In this study, two polarization effects, namely the state of polarization (SOP) and polarization mode dispersion (PMD) in optical fibre cable are investigated. The change in polarization effects introduces errors in optical fibre communication system. We find that the SOP drifts slowly in buried cables, and rapidly in aerial cables. This is because buried cables are located in a static environment, whereas aerial cables are exposed directly to a dynamic environment. The SOP change in aerial cable shows significant correlation with its environment (the global radiation, temperature and wind). The autocorrelation function (ACF) was not performed in buried cable, since they do not satisfy the ACF assumption, whereas in aerial cable it is found that the ACF of the SOP decorrelates quite quickly during the day. The 50 percent decorrelation time during the day and night are 9.6 and 30.4 minutes, respectively. During the day the properties of the optical fibre change rapidly as a result of the rapidly changing environmental conditions, whereas at night the environmental conditions change relatively slowly. Fast Fourier Transform (FFT) of the SOP fluctuations show discrete peaks, which corresponds to the wind induced vibrational frequency of the cable. The PMD fluctuations for undeployed and deployed aerial optical fibre cable are monitored using the generalized interferometric technique (GINTY). It is found that the PMD measured with polarization scrambling is more scattered but more reliable than the PMD measured without polarization scrambling. This is because the PMD obtained with polarization scrambling is averaged over different input and output (I/O) SOP pairs. For deployed aerial cable, it is found that the PMD measured without polarization scrambling fluctuates rapidly during high wind speed conditions. Furthermore, there is a correlation between the measured PMD and the change in temperature. It is found that the change in temperature has a stronger influence than the wind on the PMD of the optical fibre link.
- Full Text:
- Date Issued: 2008
- Authors: Mudau, Azwitamisi Eric
- Date: 2008
- Subjects: Polarization (Light) , Fiber optics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10521 , http://hdl.handle.net/10948/1060 , Polarization (Light) , Fiber optics
- Description: In this study, two polarization effects, namely the state of polarization (SOP) and polarization mode dispersion (PMD) in optical fibre cable are investigated. The change in polarization effects introduces errors in optical fibre communication system. We find that the SOP drifts slowly in buried cables, and rapidly in aerial cables. This is because buried cables are located in a static environment, whereas aerial cables are exposed directly to a dynamic environment. The SOP change in aerial cable shows significant correlation with its environment (the global radiation, temperature and wind). The autocorrelation function (ACF) was not performed in buried cable, since they do not satisfy the ACF assumption, whereas in aerial cable it is found that the ACF of the SOP decorrelates quite quickly during the day. The 50 percent decorrelation time during the day and night are 9.6 and 30.4 minutes, respectively. During the day the properties of the optical fibre change rapidly as a result of the rapidly changing environmental conditions, whereas at night the environmental conditions change relatively slowly. Fast Fourier Transform (FFT) of the SOP fluctuations show discrete peaks, which corresponds to the wind induced vibrational frequency of the cable. The PMD fluctuations for undeployed and deployed aerial optical fibre cable are monitored using the generalized interferometric technique (GINTY). It is found that the PMD measured with polarization scrambling is more scattered but more reliable than the PMD measured without polarization scrambling. This is because the PMD obtained with polarization scrambling is averaged over different input and output (I/O) SOP pairs. For deployed aerial cable, it is found that the PMD measured without polarization scrambling fluctuates rapidly during high wind speed conditions. Furthermore, there is a correlation between the measured PMD and the change in temperature. It is found that the change in temperature has a stronger influence than the wind on the PMD of the optical fibre link.
- Full Text:
- Date Issued: 2008
Constructing confidence intervals for polarization mode dispersion
- Authors: Erlank, Warrick
- Date: 2008
- Subjects: Fiber optics , Polarization (Light)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10571 , http://hdl.handle.net/10948/951 , Fiber optics , Polarization (Light)
- Description: Polarization mode dispersion (PMD) causes significant impairment in high bit-rate optical telecommunications systems. Knowledge of a fibre’s PMD mean value, and the relevant confidence interval, is essential for determining a fibre’s maximum allowable bit-rate. Various methods of confidence interval construction for time series data were tested in this dissertation using simulation. These included the autocovariance-matrix methods as suggested by Box and Jenkins, as well as the more practical and simpler batch means methods. Some of these methods were shown to be significantly better than the standard method of calculating confidence intervals for non time series data. The best of the tested methods were used on actual PMD data. The effect of using polarization scramblers was also tested.
- Full Text:
- Date Issued: 2008
- Authors: Erlank, Warrick
- Date: 2008
- Subjects: Fiber optics , Polarization (Light)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10571 , http://hdl.handle.net/10948/951 , Fiber optics , Polarization (Light)
- Description: Polarization mode dispersion (PMD) causes significant impairment in high bit-rate optical telecommunications systems. Knowledge of a fibre’s PMD mean value, and the relevant confidence interval, is essential for determining a fibre’s maximum allowable bit-rate. Various methods of confidence interval construction for time series data were tested in this dissertation using simulation. These included the autocovariance-matrix methods as suggested by Box and Jenkins, as well as the more practical and simpler batch means methods. Some of these methods were shown to be significantly better than the standard method of calculating confidence intervals for non time series data. The best of the tested methods were used on actual PMD data. The effect of using polarization scramblers was also tested.
- Full Text:
- Date Issued: 2008
Development of platinum metal specific separating agents
- Authors: Jonck, Heine
- Date: 2008
- Subjects: Platinum , Platinum -- Separation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10401 , http://hdl.handle.net/10948/712 , Platinum , Platinum -- Separation
- Description: In this dissertation, the aim was to develop a platinum specific resin to be utilized for the early removal of platinum from the industrial feed solution. Efforts were therefore directed towards the syntheses of silica based resins, with active centra, designed for platinum. The large chlorometallate ions present in the feed stream, were characterized in terms of physical parameters relevant to phase distribution, namely distortability (RD), charge density, softness (σ) etc. Matching cations for each of the types were investigated. In order to attempt the design of platinum specific resins, different structural amines were used to aminate the silicone precursor and to subsequently fix these onto the silica framework. Two different solvents namely alcohol and dmf were used in this process, resulting in two sets of resins, with different properties. The design was based on previous experience with these ions, with reference to their behaviour towards different types of cations. The platinum species, PtCl6 2- and PtCl4 2-, as well as the most important contaminants in the feed stream, were typified, bearing in mind size, charge, charge density and distortability. Different types of cationic centra, having differences in charge density, stereochemical crowding and extent of hydrophobicity, were synthesized and tested-both as solvent extractants (where possible) and silica based resins. The results indicated that, partly screened secondary ammonium cationic resin species, which could be regarded as “intermediate”, proved to be satisfactory both in their high percentage extraction for PtCl4 2- and rejection of contaminants like chlororhodates, chloroiridates(III) and FeCl4 -. It was however necessary, to work at a redox potential, where iridium(IV) in the form of IrCl6 2-, was absent. Various 2-aminoalkane resins were prepared, with variation in the length of alkane group and synthesised by the two different solvents. The latter resulted in two sets of resins with not only differing compactness, but also having significantly different properties with reference to platinum specificity, HCl effect and stripping potential. The 2-aminobutane and 2-aminoheptane resins in particular, proved to be very satisfactory platinum specific resins, both with respect to selectivity, platinum capacity and stripping potential. The various physical parameters could be applied to identify the chemical behaviour of anions and assist in the development of anion specificity for the relevant species.
- Full Text:
- Date Issued: 2008
- Authors: Jonck, Heine
- Date: 2008
- Subjects: Platinum , Platinum -- Separation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10401 , http://hdl.handle.net/10948/712 , Platinum , Platinum -- Separation
- Description: In this dissertation, the aim was to develop a platinum specific resin to be utilized for the early removal of platinum from the industrial feed solution. Efforts were therefore directed towards the syntheses of silica based resins, with active centra, designed for platinum. The large chlorometallate ions present in the feed stream, were characterized in terms of physical parameters relevant to phase distribution, namely distortability (RD), charge density, softness (σ) etc. Matching cations for each of the types were investigated. In order to attempt the design of platinum specific resins, different structural amines were used to aminate the silicone precursor and to subsequently fix these onto the silica framework. Two different solvents namely alcohol and dmf were used in this process, resulting in two sets of resins, with different properties. The design was based on previous experience with these ions, with reference to their behaviour towards different types of cations. The platinum species, PtCl6 2- and PtCl4 2-, as well as the most important contaminants in the feed stream, were typified, bearing in mind size, charge, charge density and distortability. Different types of cationic centra, having differences in charge density, stereochemical crowding and extent of hydrophobicity, were synthesized and tested-both as solvent extractants (where possible) and silica based resins. The results indicated that, partly screened secondary ammonium cationic resin species, which could be regarded as “intermediate”, proved to be satisfactory both in their high percentage extraction for PtCl4 2- and rejection of contaminants like chlororhodates, chloroiridates(III) and FeCl4 -. It was however necessary, to work at a redox potential, where iridium(IV) in the form of IrCl6 2-, was absent. Various 2-aminoalkane resins were prepared, with variation in the length of alkane group and synthesised by the two different solvents. The latter resulted in two sets of resins with not only differing compactness, but also having significantly different properties with reference to platinum specificity, HCl effect and stripping potential. The 2-aminobutane and 2-aminoheptane resins in particular, proved to be very satisfactory platinum specific resins, both with respect to selectivity, platinum capacity and stripping potential. The various physical parameters could be applied to identify the chemical behaviour of anions and assist in the development of anion specificity for the relevant species.
- Full Text:
- Date Issued: 2008
Diet and feeding effects of introduced giraffe in the Eastern Cape
- Authors: Jacobs, Evert Philippus
- Date: 2008
- Subjects: Giraffe -- Food -- South Africa -- Eastern Cape , Giraffe -- Ecology -- South Africa -- Eastern Cape , Animal-plant relationships -- South Africa -- Eastern Cape , Introduced mammals -- Ecology -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10703 , http://hdl.handle.net/10948/964 , Giraffe -- Food -- South Africa -- Eastern Cape , Giraffe -- Ecology -- South Africa -- Eastern Cape , Animal-plant relationships -- South Africa -- Eastern Cape , Introduced mammals -- Ecology -- South Africa -- Eastern Cape
- Description: This study presents the results of a study on introduced giraffe diet and feeding effects within the Eastern Cape Province of South Africa. Five sites were selected over a moisture gradient from the mesic east to the arid west of the Eastern Cape to describe giraffe diet and provide baseline data for feeding effect experiments. At each site faecal samples were collected seasonally and diet composition determined by microhistological analysis. Plant species availability was measured using the point intersect method in order to compare plant availability to plant consumption to determine diet preferences. Giraffe diet across the sites showed a unimodal response to rainfall by utilising fewer species in drier areas where plant availability is low and increasing the number of species consumed as the rainfall increases. In higher rainfall areas, giraffe reduced the number of plant species fed upon because of the high availability of important species that reduces the need for a varied diet. Across all sites, plant availability was dominated by woody plant species (more than 90 percent at each site). A total of 57 plants species were recorded as being eaten across the five sites. Several PDI (Principle Diet Items) plant species (Acacia karroo, Schotia afra, Pappea capensis and Euclea undulata) were eaten across sites. Over all the sites, significantly preferred species were Asparagus striatus, Schotia latifolia, Asparagus suaveolens, Commelina benghalensis, Viscum rotundifolium, and Acacia cyclops. Acacia karroo, Schotia afra, Pappea capensis, Rhus crenata, A. tetracantha, and Grewia robusta were utilised in proportion to their availability. Euclea undulata, Rhus longispina and Putterlickia pyracantha were avoided. Feeding effects were tested by erecting exclosures around trees, covering one half of each tree. Ten trees were selected for these manipulative experiments which ran from September 2003 to February 2005. The number of branches, number of leaves, branch orders, branch diameter, branch length, leaf length and leaf width were measured for ten samples per side (enclosed vs. exposed) and analysed using a Wilcoxon matched pairs test and tested for effect size using Cohen’s d. Although no significant differences were detected between the sides measured, the effect size indicated differences in all measurements between sides ranging from low to moderate. Leaf length was greater on the outside of exclosures and showed a moderate difference between the sides in terms of the d-value with the p-value (0.059) tending towards significance. Although leaf width was higher on the inside of exclosures, it only showed a moderate difference for d with no statistical significance. Leaf area was higher on the inside of exclosures and tended to significance (p = 0.059) and similarly the d value indicated moderate differences between the sides in terms of effect size. Similarly branch length was higher on the inside of exclosures although not significantly, the p-value (0.07) approached significance. The effect size for branch length also showed a moderate difference between the sides. The number of branches and the number of leaves showed no statistical differences between the sides although the p-value (0.059) for the number of branches, as well as number of leaves (p = 0.07) approached significance. For both these variables, effect size showed a moderate difference. Giraffe showed diversity in their diet selection across sites but mainly fed upon available species. Some preferred species were however less available and this preference could possibly result in increased pressure on the selected plant species Exclosure experiments showed no significant differences in leaf and shoot characteristics although all measurements showed differences in terms of effect size meriting further investigation. It is concluded that giraffe impact on sites may be reduced if populations are properly managed however, high densities of giraffe could lead to similar vegetation impacts as observed in other areas where giraffe have been introduced and potentially change vegetation structure and plant community composition.
- Full Text:
- Date Issued: 2008
- Authors: Jacobs, Evert Philippus
- Date: 2008
- Subjects: Giraffe -- Food -- South Africa -- Eastern Cape , Giraffe -- Ecology -- South Africa -- Eastern Cape , Animal-plant relationships -- South Africa -- Eastern Cape , Introduced mammals -- Ecology -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10703 , http://hdl.handle.net/10948/964 , Giraffe -- Food -- South Africa -- Eastern Cape , Giraffe -- Ecology -- South Africa -- Eastern Cape , Animal-plant relationships -- South Africa -- Eastern Cape , Introduced mammals -- Ecology -- South Africa -- Eastern Cape
- Description: This study presents the results of a study on introduced giraffe diet and feeding effects within the Eastern Cape Province of South Africa. Five sites were selected over a moisture gradient from the mesic east to the arid west of the Eastern Cape to describe giraffe diet and provide baseline data for feeding effect experiments. At each site faecal samples were collected seasonally and diet composition determined by microhistological analysis. Plant species availability was measured using the point intersect method in order to compare plant availability to plant consumption to determine diet preferences. Giraffe diet across the sites showed a unimodal response to rainfall by utilising fewer species in drier areas where plant availability is low and increasing the number of species consumed as the rainfall increases. In higher rainfall areas, giraffe reduced the number of plant species fed upon because of the high availability of important species that reduces the need for a varied diet. Across all sites, plant availability was dominated by woody plant species (more than 90 percent at each site). A total of 57 plants species were recorded as being eaten across the five sites. Several PDI (Principle Diet Items) plant species (Acacia karroo, Schotia afra, Pappea capensis and Euclea undulata) were eaten across sites. Over all the sites, significantly preferred species were Asparagus striatus, Schotia latifolia, Asparagus suaveolens, Commelina benghalensis, Viscum rotundifolium, and Acacia cyclops. Acacia karroo, Schotia afra, Pappea capensis, Rhus crenata, A. tetracantha, and Grewia robusta were utilised in proportion to their availability. Euclea undulata, Rhus longispina and Putterlickia pyracantha were avoided. Feeding effects were tested by erecting exclosures around trees, covering one half of each tree. Ten trees were selected for these manipulative experiments which ran from September 2003 to February 2005. The number of branches, number of leaves, branch orders, branch diameter, branch length, leaf length and leaf width were measured for ten samples per side (enclosed vs. exposed) and analysed using a Wilcoxon matched pairs test and tested for effect size using Cohen’s d. Although no significant differences were detected between the sides measured, the effect size indicated differences in all measurements between sides ranging from low to moderate. Leaf length was greater on the outside of exclosures and showed a moderate difference between the sides in terms of the d-value with the p-value (0.059) tending towards significance. Although leaf width was higher on the inside of exclosures, it only showed a moderate difference for d with no statistical significance. Leaf area was higher on the inside of exclosures and tended to significance (p = 0.059) and similarly the d value indicated moderate differences between the sides in terms of effect size. Similarly branch length was higher on the inside of exclosures although not significantly, the p-value (0.07) approached significance. The effect size for branch length also showed a moderate difference between the sides. The number of branches and the number of leaves showed no statistical differences between the sides although the p-value (0.059) for the number of branches, as well as number of leaves (p = 0.07) approached significance. For both these variables, effect size showed a moderate difference. Giraffe showed diversity in their diet selection across sites but mainly fed upon available species. Some preferred species were however less available and this preference could possibly result in increased pressure on the selected plant species Exclosure experiments showed no significant differences in leaf and shoot characteristics although all measurements showed differences in terms of effect size meriting further investigation. It is concluded that giraffe impact on sites may be reduced if populations are properly managed however, high densities of giraffe could lead to similar vegetation impacts as observed in other areas where giraffe have been introduced and potentially change vegetation structure and plant community composition.
- Full Text:
- Date Issued: 2008
Equiprime near-rings
- Authors: Mogae, Kabelo
- Date: 2008
- Subjects: Near-rings
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10505 , http://hdl.handle.net/10948/1028 , Near-rings
- Description: Prior to 1990, the only well known ideal-hereditary Kurosh-Amitsur radicals in the variety of zero-symmetric near-rings were the Jacobson type radicals Iv(N) , where ∨∈{2,3} and the Brown-McCoy radical. In 1990, Booth, Groenewald and Veldsman introduced the concept of an equiprime near-ring which leads to an ideal-hereditary Kurosh-Amitsur radical in N∘. The concept of an equiprime near-ring generalizes the concept of a prime ring to near-rings. Although the search for more ideal-hereditary radicals of near-rings was apparently the original motivation for the introduction of equiprime near-rings, it became clear that these near-rings are interesting in their own right. It is our aim in this treatise to give an exposition of the many interesting properties of equiprime near-rings. We begin with a brief reminder of near-ring rudiments; giving basic definitions and elementary results which are necessary for understanding and development of subsequent chapters. With the basics out of the way, our main task begins with a consideration of equiprime, strongly and completely equiprime left ideals. It is noted that any zero-symmetric near-ring can be embedded in an equiprime near-ring. Moreover, the class of equiprime near-rings is shown to be hereditary. Open questions arising out of the study of equiprime near-rings are highlighted along the way. In Chapter 3 we consider well known examples of near-rings and determine when such near-rings are equiprime. This provides more insight into the nature of equiprime near-rings and is a fertile ground for the birth of examples and counterexamples which may be used to close or solve some open question within the literature. We also prove some results which generalize some results of Booth and Hall [10] and Veldsman [29]. These results have not been previously presented elsewhere to the best of our knowledge. vii In Chapter 4, the equiprime near-rings are shown to yield an ideal-hereditary radical in N∘. It is shown that a special radical theory can be built on the equiprime nearrings in much the same way prime rings are used in ring theory to define special radical classes of rings.
- Full Text:
- Date Issued: 2008
- Authors: Mogae, Kabelo
- Date: 2008
- Subjects: Near-rings
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10505 , http://hdl.handle.net/10948/1028 , Near-rings
- Description: Prior to 1990, the only well known ideal-hereditary Kurosh-Amitsur radicals in the variety of zero-symmetric near-rings were the Jacobson type radicals Iv(N) , where ∨∈{2,3} and the Brown-McCoy radical. In 1990, Booth, Groenewald and Veldsman introduced the concept of an equiprime near-ring which leads to an ideal-hereditary Kurosh-Amitsur radical in N∘. The concept of an equiprime near-ring generalizes the concept of a prime ring to near-rings. Although the search for more ideal-hereditary radicals of near-rings was apparently the original motivation for the introduction of equiprime near-rings, it became clear that these near-rings are interesting in their own right. It is our aim in this treatise to give an exposition of the many interesting properties of equiprime near-rings. We begin with a brief reminder of near-ring rudiments; giving basic definitions and elementary results which are necessary for understanding and development of subsequent chapters. With the basics out of the way, our main task begins with a consideration of equiprime, strongly and completely equiprime left ideals. It is noted that any zero-symmetric near-ring can be embedded in an equiprime near-ring. Moreover, the class of equiprime near-rings is shown to be hereditary. Open questions arising out of the study of equiprime near-rings are highlighted along the way. In Chapter 3 we consider well known examples of near-rings and determine when such near-rings are equiprime. This provides more insight into the nature of equiprime near-rings and is a fertile ground for the birth of examples and counterexamples which may be used to close or solve some open question within the literature. We also prove some results which generalize some results of Booth and Hall [10] and Veldsman [29]. These results have not been previously presented elsewhere to the best of our knowledge. vii In Chapter 4, the equiprime near-rings are shown to yield an ideal-hereditary radical in N∘. It is shown that a special radical theory can be built on the equiprime nearrings in much the same way prime rings are used in ring theory to define special radical classes of rings.
- Full Text:
- Date Issued: 2008
Growth of the South African abalone (Haliotis Midae) on three diets, under commercial conditions
- Authors: Makhande, Emmanuel Denis
- Date: 2008
- Subjects: Haliotis midae -- South Africa , Abalone culture -- South Africa , Abalones -- Nutrition -- South Africa , Abalones -- Physiology -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10706 , http://hdl.handle.net/10948/755 , Haliotis midae -- South Africa , Abalone culture -- South Africa , Abalones -- Nutrition -- South Africa , Abalones -- Physiology -- South Africa
- Description: Haliotis midae is the cornerstone of the South African abalone fishery. For more than a decade, the wild abalone stock of South Africa has suffered decline due to over-exploitation and illegal activities such as poaching. Prior to 1970, no regulations were in place concerning the annual landings. As a result the fishery was exploited as if it were an infinite resource. It is this initial uncontrolled harvesting (regardless of age) and poaching that has driven the abalone resource decline. Due to the slow growth rate exhibited by abalone as a species, natural replenishment of wild stock following exploitation and poaching was far below the rate of exploitation of this resource. Studies on the growth of abalone have mainly been conducted under laboratory conditions. The purpose of this study was to measure the growth of abalone, fed different diets, under commercial culture conditions. Three food types were used namely; commercial pellets, seaweed (Ulva spp.) and dried kelp bars (Ecklonia maxima). Four diets were obtained from the three food types namely; combination of commercial pellets and seaweed (Diet A), commercial pellets only (Diet B), seaweed only (Diet C) and dried kelp bars only (Diet D). The food types used in this study represent both artificial (Commercial pellets) and natural feeds (seaweed and kelp) used in commercial abalone culture. The growth of two cohorts (40-50 mm and 50-60 mm) was followed over a 426 day period, with data for the first 183 days being used for statistical analysis to determine performance of a given diet. The best growth rates were found in abalone fed Diet A (40-50 mm: 2.64 mm.month-1; 50-60 mm 2.78: mm.month-1) and B (40-50 mm: 2.20 mm.month-1; 50-60 mm: 2.35: mm.month-1). These (Diets A and B) gave higher growth rates when compared to Diets C and D (natural diets), whose growth rates ranged between 0.50 mm.month-1 and 1.71 mm.month-1 for both cohorts. Also observed in this study was that, the mixture of formulated diet and seaweed gave better growth than formulated diet given exclusively.
- Full Text:
- Date Issued: 2008
- Authors: Makhande, Emmanuel Denis
- Date: 2008
- Subjects: Haliotis midae -- South Africa , Abalone culture -- South Africa , Abalones -- Nutrition -- South Africa , Abalones -- Physiology -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10706 , http://hdl.handle.net/10948/755 , Haliotis midae -- South Africa , Abalone culture -- South Africa , Abalones -- Nutrition -- South Africa , Abalones -- Physiology -- South Africa
- Description: Haliotis midae is the cornerstone of the South African abalone fishery. For more than a decade, the wild abalone stock of South Africa has suffered decline due to over-exploitation and illegal activities such as poaching. Prior to 1970, no regulations were in place concerning the annual landings. As a result the fishery was exploited as if it were an infinite resource. It is this initial uncontrolled harvesting (regardless of age) and poaching that has driven the abalone resource decline. Due to the slow growth rate exhibited by abalone as a species, natural replenishment of wild stock following exploitation and poaching was far below the rate of exploitation of this resource. Studies on the growth of abalone have mainly been conducted under laboratory conditions. The purpose of this study was to measure the growth of abalone, fed different diets, under commercial culture conditions. Three food types were used namely; commercial pellets, seaweed (Ulva spp.) and dried kelp bars (Ecklonia maxima). Four diets were obtained from the three food types namely; combination of commercial pellets and seaweed (Diet A), commercial pellets only (Diet B), seaweed only (Diet C) and dried kelp bars only (Diet D). The food types used in this study represent both artificial (Commercial pellets) and natural feeds (seaweed and kelp) used in commercial abalone culture. The growth of two cohorts (40-50 mm and 50-60 mm) was followed over a 426 day period, with data for the first 183 days being used for statistical analysis to determine performance of a given diet. The best growth rates were found in abalone fed Diet A (40-50 mm: 2.64 mm.month-1; 50-60 mm 2.78: mm.month-1) and B (40-50 mm: 2.20 mm.month-1; 50-60 mm: 2.35: mm.month-1). These (Diets A and B) gave higher growth rates when compared to Diets C and D (natural diets), whose growth rates ranged between 0.50 mm.month-1 and 1.71 mm.month-1 for both cohorts. Also observed in this study was that, the mixture of formulated diet and seaweed gave better growth than formulated diet given exclusively.
- Full Text:
- Date Issued: 2008
Integer optimization for the selection of a twenty20 cricket team
- Authors: Lourens, Mark
- Date: 2008
- Subjects: Cricket -- Coaching , Teamwork (Sports) , Cricket players , Sports -- Research -- Methodology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10568 , http://hdl.handle.net/10948/1000 , http://hdl.handle.net/10948/d1009631 , Cricket -- Coaching , Teamwork (Sports) , Cricket players , Sports -- Research -- Methodology
- Description: During the last few years, much effort has been devoted to measuring the ability of sport teams, as well as that of the individual players. Much research has been on the game of cricket, and the comparison, or ranking, of players according to their abilities. This study continues preceding research using an optimization approach, namely, a binary integer programme, to select an SA domestic Pro20 cricket team.
- Full Text:
- Date Issued: 2008
- Authors: Lourens, Mark
- Date: 2008
- Subjects: Cricket -- Coaching , Teamwork (Sports) , Cricket players , Sports -- Research -- Methodology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10568 , http://hdl.handle.net/10948/1000 , http://hdl.handle.net/10948/d1009631 , Cricket -- Coaching , Teamwork (Sports) , Cricket players , Sports -- Research -- Methodology
- Description: During the last few years, much effort has been devoted to measuring the ability of sport teams, as well as that of the individual players. Much research has been on the game of cricket, and the comparison, or ranking, of players according to their abilities. This study continues preceding research using an optimization approach, namely, a binary integer programme, to select an SA domestic Pro20 cricket team.
- Full Text:
- Date Issued: 2008
Investigation of polarization mode dispersion measurement perfomance in optical fibre with a focus on the fixed analyzer technique
- Gamatham, Romeo Reginald Gunther
- Authors: Gamatham, Romeo Reginald Gunther
- Date: 2008
- Subjects: Fiber optics , Polarization (Light)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10524 , http://hdl.handle.net/10948/957 , Fiber optics , Polarization (Light)
- Description: The work presented in this dissertation is a comparative study of polarization mode dispersion (PMD) measurement performance where the fixed analyzer (FA) technique was built and tested for the first time in South Africa. Techniques involved in the study are: the Jones matrix eigenanalysis (JME), generalised interferometric technique (GINTY) and the FA technique, with a particular focus on the FA technique. The FA PMD measurement technique determines the average differential group delay (DGD) from the transmitted intensity spectrum through a polarizer and has three analysis methods (extrema counting, mean level crossing and Fourier analysis) which were all evaluated. PMD measurements were performed in the laboratory on several different fibre types and in the field on buried deployed Telkom fibre links (28.8 km). The techniques showed good agreement in the measured PMD value, both in the laboratory and field measurements. In particular very good agreement was found between the JME average DGD and the extrema counting analysis PMD value. The GINTY and FA Fourier analysis method also gave very similar PMD values. It was found that the fibre birefringence and the mode coupling manifest in different ways on the intensity spectrum. By using the FA ratio method, the length regimes of the different fibre types were determined. Three characteristics of the FA technique were investigated, namely: wavelength window variation, sampling and input SOP scrambling. It was found that the wavelength window and the PMD are inversely proportional. Correct sampling plays a significant role in determining the correct measured PMD value. Lastly an average PMD value over the PMD values for different input SOPs serves as a better representation of the true PMD value. An additional study showed that the FA technique and a developed Poincaré sphere analysis method agree very well regarding the PMD value.
- Full Text:
- Date Issued: 2008
- Authors: Gamatham, Romeo Reginald Gunther
- Date: 2008
- Subjects: Fiber optics , Polarization (Light)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10524 , http://hdl.handle.net/10948/957 , Fiber optics , Polarization (Light)
- Description: The work presented in this dissertation is a comparative study of polarization mode dispersion (PMD) measurement performance where the fixed analyzer (FA) technique was built and tested for the first time in South Africa. Techniques involved in the study are: the Jones matrix eigenanalysis (JME), generalised interferometric technique (GINTY) and the FA technique, with a particular focus on the FA technique. The FA PMD measurement technique determines the average differential group delay (DGD) from the transmitted intensity spectrum through a polarizer and has three analysis methods (extrema counting, mean level crossing and Fourier analysis) which were all evaluated. PMD measurements were performed in the laboratory on several different fibre types and in the field on buried deployed Telkom fibre links (28.8 km). The techniques showed good agreement in the measured PMD value, both in the laboratory and field measurements. In particular very good agreement was found between the JME average DGD and the extrema counting analysis PMD value. The GINTY and FA Fourier analysis method also gave very similar PMD values. It was found that the fibre birefringence and the mode coupling manifest in different ways on the intensity spectrum. By using the FA ratio method, the length regimes of the different fibre types were determined. Three characteristics of the FA technique were investigated, namely: wavelength window variation, sampling and input SOP scrambling. It was found that the wavelength window and the PMD are inversely proportional. Correct sampling plays a significant role in determining the correct measured PMD value. Lastly an average PMD value over the PMD values for different input SOPs serves as a better representation of the true PMD value. An additional study showed that the FA technique and a developed Poincaré sphere analysis method agree very well regarding the PMD value.
- Full Text:
- Date Issued: 2008
Manufacturing as a reference for rethinking construction design management
- Authors: Sidloyi, Xabiso
- Date: 2008
- Subjects: Industrial design -- Management , Construction industry -- Management -- South Africa -- Eastern Cape , Architecture -- Management
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:9667 , http://hdl.handle.net/10948/766 , Industrial design -- Management , Construction industry -- Management -- South Africa -- Eastern Cape , Architecture -- Management
- Description: Design changes due to lack of constructability, cost overruns, delays and dissatisfied clients are but a few problems experienced in construction due to poor management of the design processes. Increased problems, challenges, demands and continuous criticism of the architectural profession has led to increased demand for research into the improvement of design processes. The aims of this research were to determine the adequacy of design management processes used by Eastern Cape (EC) architectural companies and compare these with the design management processes used in manufacturing in order to establish practices, theories, principles, technologies and deliverables that can be transferred from the manufacturing into the construction to improve efficiency of architectural design management. The quantitative research approach was implemented for this research, the questionnaire was designed to acquire primary, factual and attitudinal data from EC architectural companies and secondary data were acquired through a literature review. The results revealed that design management processes, continuous improvement philosophies, lean principles, and Information and Communication Technology (ICT) used by EC architectural companies are not similar to those used in manufacturing. Therefore EC architectural companies could increase their efficiency by adopting some of the design management processes, ICT, continuous improvement philosophies and lean principles originating from the manufacturing industry.
- Full Text:
- Date Issued: 2008
- Authors: Sidloyi, Xabiso
- Date: 2008
- Subjects: Industrial design -- Management , Construction industry -- Management -- South Africa -- Eastern Cape , Architecture -- Management
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:9667 , http://hdl.handle.net/10948/766 , Industrial design -- Management , Construction industry -- Management -- South Africa -- Eastern Cape , Architecture -- Management
- Description: Design changes due to lack of constructability, cost overruns, delays and dissatisfied clients are but a few problems experienced in construction due to poor management of the design processes. Increased problems, challenges, demands and continuous criticism of the architectural profession has led to increased demand for research into the improvement of design processes. The aims of this research were to determine the adequacy of design management processes used by Eastern Cape (EC) architectural companies and compare these with the design management processes used in manufacturing in order to establish practices, theories, principles, technologies and deliverables that can be transferred from the manufacturing into the construction to improve efficiency of architectural design management. The quantitative research approach was implemented for this research, the questionnaire was designed to acquire primary, factual and attitudinal data from EC architectural companies and secondary data were acquired through a literature review. The results revealed that design management processes, continuous improvement philosophies, lean principles, and Information and Communication Technology (ICT) used by EC architectural companies are not similar to those used in manufacturing. Therefore EC architectural companies could increase their efficiency by adopting some of the design management processes, ICT, continuous improvement philosophies and lean principles originating from the manufacturing industry.
- Full Text:
- Date Issued: 2008
Model selection for cointegrated relationships in small samples
- He, Wei
- Authors: He, Wei
- Date: 2008
- Subjects: Economics -- Statistical methods , Cointegration -- South Africa , Econometrics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10570 , http://hdl.handle.net/10948/971 , Economics -- Statistical methods , Cointegration -- South Africa , Econometrics
- Description: Vector autoregression models have become widely used research tools in the analysis of macroeconomic time series. Cointegrated techniques are an essential part of empirical macroeconomic research. They infer causal long-run relationships between nonstationary variables. In this study, six information criteria were reviewed and compared. The methods focused on determining the optimum information criteria for detecting the correct lag structure of a two-variable cointegrated process.
- Full Text:
- Date Issued: 2008
- Authors: He, Wei
- Date: 2008
- Subjects: Economics -- Statistical methods , Cointegration -- South Africa , Econometrics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10570 , http://hdl.handle.net/10948/971 , Economics -- Statistical methods , Cointegration -- South Africa , Econometrics
- Description: Vector autoregression models have become widely used research tools in the analysis of macroeconomic time series. Cointegrated techniques are an essential part of empirical macroeconomic research. They infer causal long-run relationships between nonstationary variables. In this study, six information criteria were reviewed and compared. The methods focused on determining the optimum information criteria for detecting the correct lag structure of a two-variable cointegrated process.
- Full Text:
- Date Issued: 2008
On the Processing of InAsSb/GaSb photodiodes for infrared detection
- Authors: Odendaal, Vicky
- Date: 2008
- Subjects: Gallium arsenide semiconductors , Photovoltaic cells , Infrared detectors , Gas-detectors
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10523 , http://hdl.handle.net/10948/980 , Gallium arsenide semiconductors , Photovoltaic cells , Infrared detectors , Gas-detectors
- Description: The objective of this dissertation is the development of the necessary processing steps needed to manufacture infrared photodiodes on InAs1-xSbx material. Preliminary surface preparation steps were performed on both InAs and InSb material, thus covering both possible extremes of the antimony mole fraction. The first experiments endeavoured to characterise the effect of several possible etchants with regards to etch rate, repeatability, limitations for photolithographic patterning and the resultant surface roughness. The etchants investigated include a lactic acid based etchant, a sulphuric acid based etchant, an acetic acid based etchant, an ammonium based etchant, a hydrochloric acid based etchant as well as an organic rinse procedure. These cleaning and etching steps were evaluated at several temperatures. Measurements were performed on an Alpha Step stylus profiler as well as an atomic force microscope. Metal-insulator-semiconductor capacitor devices were manufactured, on both InAs and InSb material, in order to investigate the effects of the above-mentioned etchants combined with surface passivation techniques in terms of surface state densities. Capacitance-versus-bias voltage measurements were done to determine the resultant surface state densities and to compare these to the surface state density of an untreated reference sample. The surface passivation techniques included KOH, Na2S as well as (NH4)2S anodisation. Auger electron spectroscopy measurements were done on InAs and InSb material in order to examine possible surface contamination due to the etchants as well as combinations of these etching and anodisation procedures. The extent of surface coverage by contaminants as well as by the intrinsic elements was measured. The results of the cleaning and etching as well as the surface passivation studies were used to manufacture photovoltaic infrared diodes on an MOCVD (metal oxide chemical vapour deposition) grown p-InAs0.91Sb0.09/i- InAs0.91Sb0.09/n-GaSb structure. Current-versus-voltage and electro-optical measurements were performed on the these diodes in order to evaluate the effect of sulphuric acid based etching combined with KOH, Na2S or (NH4)2S anodisation on the detector performance. The results of surface passivated structures were compared to those of an unpassivated reference detector.
- Full Text:
- Date Issued: 2008
- Authors: Odendaal, Vicky
- Date: 2008
- Subjects: Gallium arsenide semiconductors , Photovoltaic cells , Infrared detectors , Gas-detectors
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10523 , http://hdl.handle.net/10948/980 , Gallium arsenide semiconductors , Photovoltaic cells , Infrared detectors , Gas-detectors
- Description: The objective of this dissertation is the development of the necessary processing steps needed to manufacture infrared photodiodes on InAs1-xSbx material. Preliminary surface preparation steps were performed on both InAs and InSb material, thus covering both possible extremes of the antimony mole fraction. The first experiments endeavoured to characterise the effect of several possible etchants with regards to etch rate, repeatability, limitations for photolithographic patterning and the resultant surface roughness. The etchants investigated include a lactic acid based etchant, a sulphuric acid based etchant, an acetic acid based etchant, an ammonium based etchant, a hydrochloric acid based etchant as well as an organic rinse procedure. These cleaning and etching steps were evaluated at several temperatures. Measurements were performed on an Alpha Step stylus profiler as well as an atomic force microscope. Metal-insulator-semiconductor capacitor devices were manufactured, on both InAs and InSb material, in order to investigate the effects of the above-mentioned etchants combined with surface passivation techniques in terms of surface state densities. Capacitance-versus-bias voltage measurements were done to determine the resultant surface state densities and to compare these to the surface state density of an untreated reference sample. The surface passivation techniques included KOH, Na2S as well as (NH4)2S anodisation. Auger electron spectroscopy measurements were done on InAs and InSb material in order to examine possible surface contamination due to the etchants as well as combinations of these etching and anodisation procedures. The extent of surface coverage by contaminants as well as by the intrinsic elements was measured. The results of the cleaning and etching as well as the surface passivation studies were used to manufacture photovoltaic infrared diodes on an MOCVD (metal oxide chemical vapour deposition) grown p-InAs0.91Sb0.09/i- InAs0.91Sb0.09/n-GaSb structure. Current-versus-voltage and electro-optical measurements were performed on the these diodes in order to evaluate the effect of sulphuric acid based etching combined with KOH, Na2S or (NH4)2S anodisation on the detector performance. The results of surface passivated structures were compared to those of an unpassivated reference detector.
- Full Text:
- Date Issued: 2008
Pneumocystis jiroveci and respiratorey bacterial pathogens in cases of pneumonia at hospitals in Port Elizabeth
- Authors: Du Plessis, Sarah Jane
- Date: 2008
- Subjects: Pneumocystis carinii pneumonia , Tuberculosis -- pathogenesis , Opportunistic infections
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10328 , http://hdl.handle.net/10948/946 , Pneumocystis carinii pneumonia , Tuberculosis -- pathogenesis , Opportunistic infections
- Description: Pneumocystis jiroveci, Mycoplasma pneumoniae and Mycobacterium tuberculosis are respiratory pathogens associated with pneumonia, with increasing prevalence of Pneumocystis pneumonia (PcP) and tuberculosis (TB) in AIDS patients. Increased resistance of M. tuberculosis has emphasized the need for rapid susceptibility testing, such as flow cytometry. Sputum specimens (102) were assessed by PCR employing primers directed at the following genes: P. jiroveci: mitochondrial large subunit ribosomal RNA (mtLSUrRNA), dihydropteroate synthase (DHPS) and dihydrofolate reductase (DHFR), and for M. pneumoniae: 16S rRNA and P1 adhesin. Positive P. jiroveci samples were genotyped by PCR-SSCP (single-strand conformation polymorphism) targeting the: internal transcribed spacer region (ITS), intron of the nuclear 26S rRNA gene (26S), variable region of the mitochondrial 26S rRNA gene (mt26S) and β-tubulin gene (β-tub). Multi-drug resistant (MDR-TB) cultures grown in the presence and absence of four antibiotics (rifampicin, isoniazid, ethambutol and ofloxacin) were heat killed, stained with SYTO16 and Propidium Iodide and analysed using flow cytometry. Rifampicin resistance gene mutations were screened by PCR and DNA sequencing. Details of patient’s gender, age, HIV and M. tuberculosis status were provided by the hospitals. Women were seen to be at high risk for community-acquired P. jiroveci colonisation. Overall, prevalence of P. jiroveci was 55.1 percent (54/102 patients). P. jiroveci was mainly associated with HIV (25/102 P. jiroveci positive patients for which clinical data was available) and co-colonisation with M. tuberculosis was observed in 11 cases. Sequence analysis of DHPS and DHFR products found no resistance associated mutations. M. pneumoniae was detected in one patient. Four simple SSCP patterns were identified and there were no co-infections with other P. jiroveci strains. Nine M. tuberculosis samples [8 MDR-TB isolates (NHLS) and M. tuberculosis ATCC® 27294TM] were tested. There was a 53 percent (19 out of 36 tests) agreement of flow cytometry with the BACTEC MGIT 960. Mutations (at two specific codons, namely 516 and 531) in the rifampicin resistance-determining region (RRDR) of the rpoB gene were observed in eight M. tuberculosis isolates. Evaluation of methods for genotyping and drug susceptibility testing of PcP and TB are imperative for epidemiology and drug resistance studies, and impact on treatment protocols.
- Full Text:
- Date Issued: 2008
- Authors: Du Plessis, Sarah Jane
- Date: 2008
- Subjects: Pneumocystis carinii pneumonia , Tuberculosis -- pathogenesis , Opportunistic infections
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10328 , http://hdl.handle.net/10948/946 , Pneumocystis carinii pneumonia , Tuberculosis -- pathogenesis , Opportunistic infections
- Description: Pneumocystis jiroveci, Mycoplasma pneumoniae and Mycobacterium tuberculosis are respiratory pathogens associated with pneumonia, with increasing prevalence of Pneumocystis pneumonia (PcP) and tuberculosis (TB) in AIDS patients. Increased resistance of M. tuberculosis has emphasized the need for rapid susceptibility testing, such as flow cytometry. Sputum specimens (102) were assessed by PCR employing primers directed at the following genes: P. jiroveci: mitochondrial large subunit ribosomal RNA (mtLSUrRNA), dihydropteroate synthase (DHPS) and dihydrofolate reductase (DHFR), and for M. pneumoniae: 16S rRNA and P1 adhesin. Positive P. jiroveci samples were genotyped by PCR-SSCP (single-strand conformation polymorphism) targeting the: internal transcribed spacer region (ITS), intron of the nuclear 26S rRNA gene (26S), variable region of the mitochondrial 26S rRNA gene (mt26S) and β-tubulin gene (β-tub). Multi-drug resistant (MDR-TB) cultures grown in the presence and absence of four antibiotics (rifampicin, isoniazid, ethambutol and ofloxacin) were heat killed, stained with SYTO16 and Propidium Iodide and analysed using flow cytometry. Rifampicin resistance gene mutations were screened by PCR and DNA sequencing. Details of patient’s gender, age, HIV and M. tuberculosis status were provided by the hospitals. Women were seen to be at high risk for community-acquired P. jiroveci colonisation. Overall, prevalence of P. jiroveci was 55.1 percent (54/102 patients). P. jiroveci was mainly associated with HIV (25/102 P. jiroveci positive patients for which clinical data was available) and co-colonisation with M. tuberculosis was observed in 11 cases. Sequence analysis of DHPS and DHFR products found no resistance associated mutations. M. pneumoniae was detected in one patient. Four simple SSCP patterns were identified and there were no co-infections with other P. jiroveci strains. Nine M. tuberculosis samples [8 MDR-TB isolates (NHLS) and M. tuberculosis ATCC® 27294TM] were tested. There was a 53 percent (19 out of 36 tests) agreement of flow cytometry with the BACTEC MGIT 960. Mutations (at two specific codons, namely 516 and 531) in the rifampicin resistance-determining region (RRDR) of the rpoB gene were observed in eight M. tuberculosis isolates. Evaluation of methods for genotyping and drug susceptibility testing of PcP and TB are imperative for epidemiology and drug resistance studies, and impact on treatment protocols.
- Full Text:
- Date Issued: 2008