Data transport over optical fibre for ska using advanced modulation flexible spectrum technology
- Authors: Dlamini, Phumla Patience
- Date: 2020
- Subjects: Fiber optics
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/50666 , vital:42329
- Description: Flexible Spectrum Dense Wavelength Division Multiplexed (DWDM) optical fibre networks are next-generation technology for handling extremely high data rates of the kind produced by MeerKAT and SKA.We optimise the flexible spectrum for real-time dynamic channel wavelength assignment, to ensure optimum network performance. We needed to identify and develop novel hardware and dynamic algorithms for these networks to function optimally to perform critical tasks. Such tasks include wavelength assignment, signal routing, network restoration and network protection. The antennas of the Square Kilometre Array (SKA) network connect to the correlator and data processor in a simple point-to-point fixed configuration. The connection of the astronomer users to the data processor, however, requires a more complex network architecture. This is because the network has users scattered around South Africa, Africa and the whole world. This calls for upgrade of the classical fixed wavelength spectrum grids, to flexible spectrum grid that has improved capacity, reliable, simple and cost-effectiveness through sharing of network infrastructure. The exponential growth of data traffic in current optical communication networks requires higher capacity for the bandwidth demands at a reduced cost per bit. All-optical signal processing is a promising technique to improve network resource utilisation and resolve wavelength contention associated with the flexible spectrum. Flexible Spectrum Dense Wavelength Division Multiplexed (DWDM) optical fibre networks are next-generation technology for handling extremely high data rates of the kind produced by MeerKAT and SKA. Each DWDM channel is capable of 10 Gbps transmission rate, which is sliceable into finer flexible grid 12.5 GHz granularity to offer the network elastic spectrum and channel spacing capable of signal routing and wavelength switching for the scalability of aggregate bandwidth. The variable-sized portions of the flexible spectrum assignment to end users at different speeds depend on bandwidth demand, allowing efficient utilisation of the spectrum resources. The entire bandwidth of dynamic optical connections must be contiguously allocated. However, there is an introduction of spectrum fragmentation due to spectrum contiguity related to the optical channels having different width. Thus large traffic demands are likely to experience blocking regardless of available bandwidth. To minimise the congestion and cost-effectively obtain high performance, the optical network must be reconfigurable, achievable by adding wavelength as an extra degree of freedom for effectiveness. This can introduce colourless, directionless and contentionless reconfigurability to route individual wavelengths from fibre to fibre across multiple nodes to avoid wavelength blocking/collisions, increasing the flexibility and capacity of a network. For these networks to function optimally, novel hardware and dynamic algorithms identification and development is a critical task. Such tasks include wavelength assignment, signal routing, network restoration and network protection. In this work, we for the first time to our knowledge proposed a spectrum defragmentation technique through reallocation of the central frequency of the optical transmitter, to increase the probability of finding a sufficient continuous spectrum. This is to improve network resource utilisation, capacity and resolve wavelength contention associated with a flexible spectrum in optical communication networks. The following chapter provides details on a flexible spectrum in optical fibre networks utilising DWDM, optimising transmitter-receivers, advanced modulation formats, coherent detection, reconfigurable optical add and drop multiplexer (ROADM) technology to implement hardware and middleware platforms which address growing bandwidth demands for scalability, flexibility and cost-efficiency. A major attribute is tunable lasers, an essential component for future flexible spectrum with application to wavelength switching, routing, wavelength conversion and ROADM for the multi-node optical network through spectrum flexibility and cost-effective sharing of fibre links, transmitters and receivers. Spectrum slicing into fine granular sub-carriers and assigning several frequency slots to accommodate diverse traffic demands is a viable approach. This work experimentally presents a spectral efficient technique for bandwidth variability, wavelength allocation, routing, defragmentation and wavelength selective switches in the nodes of a network, capable of removing the fixed grid spacing using low cost, high bandwidth, power-efficient and wavelength-tunable vertical-cavity surface-emitting laser (VCSEL) transmitter directly modulated with 10 Gbps data. This to ensure that majority of the spectrum utilisation at finer channel spacing, wastage of the spectrum resource as caused by the wavelength continuity constraint reduction and it improves bandwidth utilisation. The technique is flexible in terms of modulation formats and accommodates various formats with spectrally continuous channels, fulfilling the future bandwidth demands with transmissions beyond 100 Gbps per channel while maintaining spectral efficiency.
- Full Text:
- Date Issued: 2020
- Authors: Dlamini, Phumla Patience
- Date: 2020
- Subjects: Fiber optics
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/50666 , vital:42329
- Description: Flexible Spectrum Dense Wavelength Division Multiplexed (DWDM) optical fibre networks are next-generation technology for handling extremely high data rates of the kind produced by MeerKAT and SKA.We optimise the flexible spectrum for real-time dynamic channel wavelength assignment, to ensure optimum network performance. We needed to identify and develop novel hardware and dynamic algorithms for these networks to function optimally to perform critical tasks. Such tasks include wavelength assignment, signal routing, network restoration and network protection. The antennas of the Square Kilometre Array (SKA) network connect to the correlator and data processor in a simple point-to-point fixed configuration. The connection of the astronomer users to the data processor, however, requires a more complex network architecture. This is because the network has users scattered around South Africa, Africa and the whole world. This calls for upgrade of the classical fixed wavelength spectrum grids, to flexible spectrum grid that has improved capacity, reliable, simple and cost-effectiveness through sharing of network infrastructure. The exponential growth of data traffic in current optical communication networks requires higher capacity for the bandwidth demands at a reduced cost per bit. All-optical signal processing is a promising technique to improve network resource utilisation and resolve wavelength contention associated with the flexible spectrum. Flexible Spectrum Dense Wavelength Division Multiplexed (DWDM) optical fibre networks are next-generation technology for handling extremely high data rates of the kind produced by MeerKAT and SKA. Each DWDM channel is capable of 10 Gbps transmission rate, which is sliceable into finer flexible grid 12.5 GHz granularity to offer the network elastic spectrum and channel spacing capable of signal routing and wavelength switching for the scalability of aggregate bandwidth. The variable-sized portions of the flexible spectrum assignment to end users at different speeds depend on bandwidth demand, allowing efficient utilisation of the spectrum resources. The entire bandwidth of dynamic optical connections must be contiguously allocated. However, there is an introduction of spectrum fragmentation due to spectrum contiguity related to the optical channels having different width. Thus large traffic demands are likely to experience blocking regardless of available bandwidth. To minimise the congestion and cost-effectively obtain high performance, the optical network must be reconfigurable, achievable by adding wavelength as an extra degree of freedom for effectiveness. This can introduce colourless, directionless and contentionless reconfigurability to route individual wavelengths from fibre to fibre across multiple nodes to avoid wavelength blocking/collisions, increasing the flexibility and capacity of a network. For these networks to function optimally, novel hardware and dynamic algorithms identification and development is a critical task. Such tasks include wavelength assignment, signal routing, network restoration and network protection. In this work, we for the first time to our knowledge proposed a spectrum defragmentation technique through reallocation of the central frequency of the optical transmitter, to increase the probability of finding a sufficient continuous spectrum. This is to improve network resource utilisation, capacity and resolve wavelength contention associated with a flexible spectrum in optical communication networks. The following chapter provides details on a flexible spectrum in optical fibre networks utilising DWDM, optimising transmitter-receivers, advanced modulation formats, coherent detection, reconfigurable optical add and drop multiplexer (ROADM) technology to implement hardware and middleware platforms which address growing bandwidth demands for scalability, flexibility and cost-efficiency. A major attribute is tunable lasers, an essential component for future flexible spectrum with application to wavelength switching, routing, wavelength conversion and ROADM for the multi-node optical network through spectrum flexibility and cost-effective sharing of fibre links, transmitters and receivers. Spectrum slicing into fine granular sub-carriers and assigning several frequency slots to accommodate diverse traffic demands is a viable approach. This work experimentally presents a spectral efficient technique for bandwidth variability, wavelength allocation, routing, defragmentation and wavelength selective switches in the nodes of a network, capable of removing the fixed grid spacing using low cost, high bandwidth, power-efficient and wavelength-tunable vertical-cavity surface-emitting laser (VCSEL) transmitter directly modulated with 10 Gbps data. This to ensure that majority of the spectrum utilisation at finer channel spacing, wastage of the spectrum resource as caused by the wavelength continuity constraint reduction and it improves bandwidth utilisation. The technique is flexible in terms of modulation formats and accommodates various formats with spectrally continuous channels, fulfilling the future bandwidth demands with transmissions beyond 100 Gbps per channel while maintaining spectral efficiency.
- Full Text:
- Date Issued: 2020
Optical fibre measurement for clock tones in telescope networks
- Authors: Dlamini, Phumla Patience
- Date: 2017
- Subjects: Fiber optics Very large array telescopes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/22200 , vital:29872
- Description: Astronomy dates back to the early man’s impression of the heavens with little information recorded including some drawings of comets, eclipse and supernovas[1]. Major progress has been made in the field of Astronomy since then. Scientific curiosity to probe the universe in attempt to answer questions such as the origin of the universe, the matter it is made of, the formation of stars, planets and galaxies, and tracking life in other solar systems has brought about the need for more advanced tools capable of detailed observations. In 1608 H. Lippershey developed the first refracting telescope[2], [3]. A year later Galileo used a similar telescope pointing skywards discovering mountains and craters on the earth’s moon, the moons of Jupiter and the phases of Venus. Over the years telescopes have been developed with advancements from the optical telescope towards much larger and more sensitive radio telescopes. The first radio signal from space was detected by Karl Jansky and ever since then astronomers have been using radio telescopes to explore the universe by detecting radio waves emitted by cosmic objects[4]. The ability of radio telescopes to detect weak signals is related to the signal capture surface. As the demand for sensitivity, transmission bandwidth and data rate increases, so does the need for telescopes with a large field of view and capability to observe different parts of the sky at once[5]. This is possible with radio telescope array, with the data from the antennas combined electronically to produce a high resolution image of the sky. The South African MeerKAT radio telescope is an array of 64 interlinked antennas each transmitting up to 160 Gbps of data to the central processing site over optical fibre which is ideal for carrying large volumes of data at high speeds. The MeerKAT telescope is a precursor to the Square kilometer Array which will have up to 50 times the sensitivity and 10000 times the survey speed than the best telescope[6].
- Full Text:
- Date Issued: 2017
- Authors: Dlamini, Phumla Patience
- Date: 2017
- Subjects: Fiber optics Very large array telescopes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/22200 , vital:29872
- Description: Astronomy dates back to the early man’s impression of the heavens with little information recorded including some drawings of comets, eclipse and supernovas[1]. Major progress has been made in the field of Astronomy since then. Scientific curiosity to probe the universe in attempt to answer questions such as the origin of the universe, the matter it is made of, the formation of stars, planets and galaxies, and tracking life in other solar systems has brought about the need for more advanced tools capable of detailed observations. In 1608 H. Lippershey developed the first refracting telescope[2], [3]. A year later Galileo used a similar telescope pointing skywards discovering mountains and craters on the earth’s moon, the moons of Jupiter and the phases of Venus. Over the years telescopes have been developed with advancements from the optical telescope towards much larger and more sensitive radio telescopes. The first radio signal from space was detected by Karl Jansky and ever since then astronomers have been using radio telescopes to explore the universe by detecting radio waves emitted by cosmic objects[4]. The ability of radio telescopes to detect weak signals is related to the signal capture surface. As the demand for sensitivity, transmission bandwidth and data rate increases, so does the need for telescopes with a large field of view and capability to observe different parts of the sky at once[5]. This is possible with radio telescope array, with the data from the antennas combined electronically to produce a high resolution image of the sky. The South African MeerKAT radio telescope is an array of 64 interlinked antennas each transmitting up to 160 Gbps of data to the central processing site over optical fibre which is ideal for carrying large volumes of data at high speeds. The MeerKAT telescope is a precursor to the Square kilometer Array which will have up to 50 times the sensitivity and 10000 times the survey speed than the best telescope[6].
- Full Text:
- Date Issued: 2017
- «
- ‹
- 1
- ›
- »