- Title
- Development of spunlaced nonwoven filters from PAN, PPS and PI fibres for industrial use
- Creator
- Maduna, Lebo
- Subject
- Textile fibers -- Mechanical properties
- Subject
- Nonwoven fabrics --Technological innovations Textile fibers, Synthetic -- Mechanical properties
- Date Issued
- 2019
- Date
- 2019
- Type
- Thesis
- Type
- Doctoral
- Type
- DPhil
- Identifier
- http://hdl.handle.net/10948/32610
- Identifier
- vital:32266
- Description
- The aim of this work was to produce filter fabrics suitable for high temperature and other conditions encountered in coal power plants using the spunlacing manufacturing technique. Polyacrylonitrile (PAN), polyphenylene sulfide (PPS) and polyimide (PI) fibres being combined suitable for this purpose, each at three aerial density of (440, 500 and 560 g/m2) and each at three water jet pressures of (60, 80 and 90 bars) were produced. The effect of changing these on the fabric air permeability, tensile strength and filtration properties were investigated and optimized. For this purpose, the Box-Behnken experimental design (BBD) was considered the best and therefore used. The PPS/PI fabrics were found to consistently have the highest air permeability, tensile strength and filtration performance, followed by the PPS fabrics and the PAN fabrics. As could be expected, an increase in area weight and water jet pressure generally resulted in a decrease in air permeability irrespective of the fabric types, this being due to the increased number of fibres and therefore greater fibre surface area and entanglement respectively. For fabric tensile strength, the effects of varying fabric area weight and water jet pressure were not so straight forward. For cross direction (CD) an increase in water jet pressure resulted in an increase tensile strength whereas in the machine direction (MD) there was a decrease when the water jet pressure was increased. The filtration efficiency and dust holding capacity of the fabrics were found to be around 96% and 211g/m2, respectively, with the exception of the PPS (500 g/m2 80 bar) fabrics. Increasing the amount of dust being fed to the fabric during each loading cycle, it caused an increase in pressure drop, as the fabrics became increasingly clogged forming a cake layer.
- Format
- xiv, 162 leaves
- Format
- Publisher
- Nelson Mandela University
- Publisher
- Faculty of Science
- Language
- English
- Rights
- Nelson Mandela University
- Hits: 1046
- Visitors: 1075
- Downloads: 220
Collections
NMU School of BioMolecular and Chemical Sciences
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | SOURCE1 | LEBO MADUNA THESIS 19 03 2019.pdf | 3 MB | Adobe Acrobat PDF | View Details Download |