The effects of the composition and structure of quantum dots combined with cobalt phthalocyanine and an aptamer on the electrochemical detection of prostate specific antigen
- Nxele, Siphesihle R, Nyokong, Tebello
- Authors: Nxele, Siphesihle R , Nyokong, Tebello
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/185002 , vital:44315 , xlink:href="https://doi.org/10.1016/j.dyepig.2021.109407"
- Description: The ability to functionalize and modify graphene-based quantum dots has also allowed for the tuning of their activity in different applications. A comparative study is carried out in this work where a prostate specific aptamer (PSA) and cobalt phthalocyanine molecule are combined with graphene quantum dots (GQDs), nitrogen doped graphene quantum dots (NGQDs) and graphitic carbon nitride quantum dots (gCNQDs) in order to determine the effects of quantum dots type (and therefore composition) on the electrocatalytic ability of the sensor to detect the analyte of interest. For the detection of prostate-specific antigen, electrochemical impedance spectroscopy (EIS) is employed to determine detection limits as well as sensitivity and selectivity of the aptasensors. Results showed a good performance of all sensors fabricated with the NGQDs based aptasensor showing the best performance with a detection limit of 1.54 pM in EIS as well as negligible interference in mixed samples. This electrode was further verified in spiked human serum samples and good recovery and low detection limits were determined, putting this aptasensor in good stead as a reliable, efficient PSA aptasensor.
- Full Text:
- Date Issued: 2021
- Authors: Nxele, Siphesihle R , Nyokong, Tebello
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/185002 , vital:44315 , xlink:href="https://doi.org/10.1016/j.dyepig.2021.109407"
- Description: The ability to functionalize and modify graphene-based quantum dots has also allowed for the tuning of their activity in different applications. A comparative study is carried out in this work where a prostate specific aptamer (PSA) and cobalt phthalocyanine molecule are combined with graphene quantum dots (GQDs), nitrogen doped graphene quantum dots (NGQDs) and graphitic carbon nitride quantum dots (gCNQDs) in order to determine the effects of quantum dots type (and therefore composition) on the electrocatalytic ability of the sensor to detect the analyte of interest. For the detection of prostate-specific antigen, electrochemical impedance spectroscopy (EIS) is employed to determine detection limits as well as sensitivity and selectivity of the aptasensors. Results showed a good performance of all sensors fabricated with the NGQDs based aptasensor showing the best performance with a detection limit of 1.54 pM in EIS as well as negligible interference in mixed samples. This electrode was further verified in spiked human serum samples and good recovery and low detection limits were determined, putting this aptasensor in good stead as a reliable, efficient PSA aptasensor.
- Full Text:
- Date Issued: 2021
The electrochemical detection of prostate specific antigen on glassy carbon electrode modified with combinations of graphene quantum dots, cobalt phthalocyanine and an aptamer
- Nxele, Siphesihle R, Nyokong, Tebello
- Authors: Nxele, Siphesihle R , Nyokong, Tebello
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/185013 , vital:44316 , xlink:href="https://doi.org/10.1016/j.jinorgbio.2021.111462"
- Description: Herein, a novel aptasensor is developed for the electrochemical detection of prostate specific antigen (PSA) on electrode surfaces modified using various combinations of a Cobalt phthalocyanine (CoPc), an aptamer and graphene quantum dots (GQDs). Electrochemical impedance spectroscopy (EIS) as well as differential pulse voltammetry (DPV) are employed for the detection of PSA. In both analytical techniques, linear calibration curves were observed at a concentration range of 1.2–2.0 pM. The glassy carbon electrode where CoPc and GQDs are placed on the electrode when non-covalently linked followed by addition of the aptamer (GQDs-CoPc(ππ)-aptamer (sequential)) showed the best performance with a limit of detection (LoD) as low as 0.66 pM when using DPV. The detection limits were much lower than the dangerous levels reported for PSA in males tested for prostate cancer. This electrode showed selectivity for PSA in the presence of bovine serum albumin, glucose and L-cysteine. The aptasensor showed good stability, reproducibility and repeatability, deeming it a promising early detection device for prostate cancer.
- Full Text:
- Date Issued: 2021
- Authors: Nxele, Siphesihle R , Nyokong, Tebello
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/185013 , vital:44316 , xlink:href="https://doi.org/10.1016/j.jinorgbio.2021.111462"
- Description: Herein, a novel aptasensor is developed for the electrochemical detection of prostate specific antigen (PSA) on electrode surfaces modified using various combinations of a Cobalt phthalocyanine (CoPc), an aptamer and graphene quantum dots (GQDs). Electrochemical impedance spectroscopy (EIS) as well as differential pulse voltammetry (DPV) are employed for the detection of PSA. In both analytical techniques, linear calibration curves were observed at a concentration range of 1.2–2.0 pM. The glassy carbon electrode where CoPc and GQDs are placed on the electrode when non-covalently linked followed by addition of the aptamer (GQDs-CoPc(ππ)-aptamer (sequential)) showed the best performance with a limit of detection (LoD) as low as 0.66 pM when using DPV. The detection limits were much lower than the dangerous levels reported for PSA in males tested for prostate cancer. This electrode showed selectivity for PSA in the presence of bovine serum albumin, glucose and L-cysteine. The aptasensor showed good stability, reproducibility and repeatability, deeming it a promising early detection device for prostate cancer.
- Full Text:
- Date Issued: 2021
Electrocatalytic activity of a push pull Co (II) phthalocyanine in the presence of graphitic carbon nitride quantum dots
- Nxele, Siphesihle R, Oluwole, David O, Nyokong, Tebello
- Authors: Nxele, Siphesihle R , Oluwole, David O , Nyokong, Tebello
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/186746 , vital:44530 , xlink:href="https://doi.org/10.1016/j.electacta.2019.134978"
- Description: This work reports for the first time on the use of a conjugate of graphitic carbon nitride quantum dots (gCNQDs) with a push-pull asymmetrical cobalt phthalocyanine (CoPc) for electrochemical sensing. The nanocomposite is immobilized on a glassy carbon electrode (GCE) surface for the use in l-cysteine electrocatalysis. The nanocomposites were characterized using techniques such as X-ray diffractometry (XRD), Fourier transform infrared (FTIR) spectroscopy, UV-vis spectroscopy, transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, Raman spectroscopy and electrochemical methods. The nanocomposites were immobilized by the drop-dry method, sequentially or when premixed in solution. Good electrocatalytic oxidation of l-cysteine was observed, especially by the sequentially modified electrode surface, with the CoPc on top of gCNQDs. The sensitivity was determined as 3.5 μA.mM-1 and the limit of detection (LoD) as 101.3 μM for GCE-gCNQDs, 0.65 μA.mM-1 and 0.96 μM for GCE-CoPc, 23.41 μA.mM-1 and 0.41 μM for gCNQDs-CoPc (premixed) and 100.5 μA.mM-1 and 0.02 μM for gCNQDs-CoPc (sequential). The electrode surfaces also showed high stability by continuous cyclization.
- Full Text:
- Date Issued: 2019
- Authors: Nxele, Siphesihle R , Oluwole, David O , Nyokong, Tebello
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/186746 , vital:44530 , xlink:href="https://doi.org/10.1016/j.electacta.2019.134978"
- Description: This work reports for the first time on the use of a conjugate of graphitic carbon nitride quantum dots (gCNQDs) with a push-pull asymmetrical cobalt phthalocyanine (CoPc) for electrochemical sensing. The nanocomposite is immobilized on a glassy carbon electrode (GCE) surface for the use in l-cysteine electrocatalysis. The nanocomposites were characterized using techniques such as X-ray diffractometry (XRD), Fourier transform infrared (FTIR) spectroscopy, UV-vis spectroscopy, transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, Raman spectroscopy and electrochemical methods. The nanocomposites were immobilized by the drop-dry method, sequentially or when premixed in solution. Good electrocatalytic oxidation of l-cysteine was observed, especially by the sequentially modified electrode surface, with the CoPc on top of gCNQDs. The sensitivity was determined as 3.5 μA.mM-1 and the limit of detection (LoD) as 101.3 μM for GCE-gCNQDs, 0.65 μA.mM-1 and 0.96 μM for GCE-CoPc, 23.41 μA.mM-1 and 0.41 μM for gCNQDs-CoPc (premixed) and 100.5 μA.mM-1 and 0.02 μM for gCNQDs-CoPc (sequential). The electrode surfaces also showed high stability by continuous cyclization.
- Full Text:
- Date Issued: 2019
Conjugation of azide-functionalised CdSe/ZnS quantum dots with tetrakis (5-hexyn-oxy) Fe (II) phthalocyanine via click chemistry for electrocatalysis
- Nxele, Siphesihle R, Nyokong, Tebello
- Authors: Nxele, Siphesihle R , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188755 , vital:44782 , xlink:href="https://doi.org/10.1016/j.electacta.2016.01.234"
- Description: In this work, azide-funtionalised CdSe/ZnS QDs are conjugated with tetrakis(5-hexyn-oxy) Fe(II) phthalocyanine for the electrocatalytic detection of paraquat. The conjugate was fully characterised using various techniques to confirm the success of the reaction. They also showed good electrocatalytic ability towards the electroreduction of paraquat with limits of detection (LoD) of 5.9 × 10−9 μM which is a great improvement compared to other reported sensors for this analyte.
- Full Text:
- Date Issued: 2016
- Authors: Nxele, Siphesihle R , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188755 , vital:44782 , xlink:href="https://doi.org/10.1016/j.electacta.2016.01.234"
- Description: In this work, azide-funtionalised CdSe/ZnS QDs are conjugated with tetrakis(5-hexyn-oxy) Fe(II) phthalocyanine for the electrocatalytic detection of paraquat. The conjugate was fully characterised using various techniques to confirm the success of the reaction. They also showed good electrocatalytic ability towards the electroreduction of paraquat with limits of detection (LoD) of 5.9 × 10−9 μM which is a great improvement compared to other reported sensors for this analyte.
- Full Text:
- Date Issued: 2016
Electrode modification using alkynyl substituted Fe (II) phthalocyanine via electrografting and click chemistry for electrocatalysis
- Nxele, Siphesihle R, Mashazi, Philani N, Nyokong, Tebello
- Authors: Nxele, Siphesihle R , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189296 , vital:44835 , xlink:href="https://doi.org/10.1002/elan.201500212"
- Description: In this work, tetrakis(5-hexyn-oxy)Fe(II) phthalocyanine was synthesised in order to perform a click reaction between the terminal alkyne groups and an azide group on a glassy carbon electrode (GCE) surface. An azide group was formed on the electrode surface following electrografting using 4-azidobenzene diazonium tetrafluoroborate by electrochemical reduction. The Cu(I) catalyzed alkyne-azide Huisgen cycloaddition reaction was then employed in order to react the terminal alkyne groups on the phthalocyanine with the azide groups on the GCE surface. The modified electrode was employed to catalyse the oxidation of hydrazine. The electrode showed good electrocatalytic ability towards the detection of hydrazine with a sensitivity of 15.38 µA mM−1 and a limit of detection of 1.09 µM.
- Full Text:
- Date Issued: 2015
- Authors: Nxele, Siphesihle R , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189296 , vital:44835 , xlink:href="https://doi.org/10.1002/elan.201500212"
- Description: In this work, tetrakis(5-hexyn-oxy)Fe(II) phthalocyanine was synthesised in order to perform a click reaction between the terminal alkyne groups and an azide group on a glassy carbon electrode (GCE) surface. An azide group was formed on the electrode surface following electrografting using 4-azidobenzene diazonium tetrafluoroborate by electrochemical reduction. The Cu(I) catalyzed alkyne-azide Huisgen cycloaddition reaction was then employed in order to react the terminal alkyne groups on the phthalocyanine with the azide groups on the GCE surface. The modified electrode was employed to catalyse the oxidation of hydrazine. The electrode showed good electrocatalytic ability towards the detection of hydrazine with a sensitivity of 15.38 µA mM−1 and a limit of detection of 1.09 µM.
- Full Text:
- Date Issued: 2015
Electrode Modification Using Alkynyl Substituted Fe(II) Phthalocyanine via Electrografting and Click Chemistry for Electrocatalysis
- Nxele, Siphesihle R, Mashazi, Philani N, Nyokong, Tebello
- Authors: Nxele, Siphesihle R , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7284 , http://hdl.handle.net/10962/d1020329
- Description: In this work, tetrakis(5-hexyn-oxy)Fe(II) phthalocyanine was synthesised in order to perform a click reaction between the terminal alkyne groups and an azide group on a glassy carbon electrode (GCE) surface. An azide group was formed on the electrode surface following electrografting using 4-azidobenzene diazonium tetrafluoroborate by electrochemical reduction. The Cu(I) catalyzed alkyne-azide Huisgen cycloaddition reaction was then employed in order to react the terminal alkyne groups on the phthalocyanine with the azide groups on the GCE surface. The modified electrode was employed to catalyse the oxidation of hydrazine. The electrode showed good electrocatalytic ability towards the detection of hydrazine with a sensitivity of 15.38 µA mM−1 and a limit of detection of 1.09 µM. , Original publication is available at http://dx.doi.org/10.1002/elan.201500212
- Full Text: false
- Authors: Nxele, Siphesihle R , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7284 , http://hdl.handle.net/10962/d1020329
- Description: In this work, tetrakis(5-hexyn-oxy)Fe(II) phthalocyanine was synthesised in order to perform a click reaction between the terminal alkyne groups and an azide group on a glassy carbon electrode (GCE) surface. An azide group was formed on the electrode surface following electrografting using 4-azidobenzene diazonium tetrafluoroborate by electrochemical reduction. The Cu(I) catalyzed alkyne-azide Huisgen cycloaddition reaction was then employed in order to react the terminal alkyne groups on the phthalocyanine with the azide groups on the GCE surface. The modified electrode was employed to catalyse the oxidation of hydrazine. The electrode showed good electrocatalytic ability towards the detection of hydrazine with a sensitivity of 15.38 µA mM−1 and a limit of detection of 1.09 µM. , Original publication is available at http://dx.doi.org/10.1002/elan.201500212
- Full Text: false
- «
- ‹
- 1
- ›
- »