Preparation and application of plasmon metal enhanced titanium dioxide photocatalyst for the removal of organics in water
- Authors: Nyamukamba, Pardon
- Date: 2016
- Subjects: Water -- Purification -- Photocatalysis Titanium dioxide Water chemistry
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/2765 , vital:28074
- Description: Advanced oxidation processes are capable of removing organic compounds that cannot be removed by conventional water treatment methods. Among the oxidation processes, photo-catalysis using titanium dioxide (TiO2) is a promising method but suffers from rapid electron-hole recombination rates and only absorbs UV light which is a small percentage (5 percent) of the total solar radiation. Therefore there is a need to reduce the recombination rates and also extend the absorption of the photo-catalyst into the visible region which constitutes 55 percent of the total solar radiation. The major aims of this study were to prepare plasmon metal decorated and doped TiO2 photo-catalysts immobilized on quartz substrates and test their photo-catalytic and antimicrobial activities. The effect of film thickness (loading) and use of different shapes of plasmon metal nanostructures was investigated. TiO2 thin films were prepared by a sputter coating technique while plasmon metal (Au & Ag)/carbon co-doped TiO2 by a simple sol gel process and plasmon metal films were prepared by the thermal evaporation technique. Different plasmon metal nanostructures (nanorods, dendrites, nanowires and spherical nanoparticles) were prepared using a wet chemical technique using sodium borohydride as the reducing agent. Nanocomposites of co-doped TiO2 photo-catalyst and plasmon elements of different proportions were also prepared. The prepared photo-catalysts were coated onto etched and MPTMS (3-Mercaptopropyl trimethoxysliane) treated quartz glass substrate which is a stable support favouring easy recovery. The prepared materials were characterized by XRD, HRTEM, TEM, HRSEM, FT-IR, SEM, PIXE and TGA while the doped TiO2 was characterized by XPS, BET, CHNS and Raman Spectroscopy. The effect of pH of solution, presence of other contaminants and salts in solution, initial concentration of the model pollutant and type of the plasmonic elements on the photocatalytic activity of TiO2 towards 4-(4-sulfophenylazo)-N,N-dimethyl aniline (methyl orange) were also investigated. The selected TiO2 photo-catalyst films were tested for antimicrobial properties. The effect of different types of plasmon elements on the antimicrobial activity of TiO2 against E. coli ATCC 3695 was evaluated under both sunlight and weak UV light. Under UV light, Ag showed the highest enhancement in photo-catalytic activity of TiO2 than Au and Cu. The photo-catalytic activity of TiO2 increased with an increase in Ag content to an optimum loading and then started to decrease with a further increase in loading. For Cu and Au, photo-activity activity increased with an increase in plasmon metal content. Under sunlight, Cu showed the highest enhancement of TiO2 photocatalytic compared to Ag and Au. The change in order of deposition showed that Au films enhanced the photo-activity better when they were deposited underneath rather than on top of TiO2 on quartz supports but Ag films performed better in enhancing photo-activity when they were deposited on top of TiO2. The use of bimetallic layers and three layer systems of different plasmon elements enhanced photo-catalytic activity better than the use of a monometallic layer. The presence of other organic contaminants and salts in solutions was found to reduce the photo-degradation of methyl orange due to preferential adsorption of other contaminants. When the pH was increased, the photocatalytic activity of TiO2 towards methyl orange was reduced. In antimicrobial studies, it was found that the plasmon elements greatly improved the antibacterial action of TiO2 against Escherichia coli ATCC 3695 in water and the best antibacterial action was observed with silver/carbon co-doped TiO2 photo-catalyst under sunlight The doped samples consisted of polydisperse nanoparticles which were found to be beneficial for photo-catalytic activity enhancement under sunlight.
- Full Text:
- Date Issued: 2016
Preparation of photocatalytic TiO₂ nanoparticles immobilized on carbon nanofibres for water purification
- Authors: Nyamukamba, Pardon
- Date: 2011
- Subjects: Water -- Purification , Titanium alloys -- Industrial applications , Titanium , Nanoparticles , Drinking water -- Purification , Drinking water -- Contamination
- Language: English
- Type: Thesis , Masters , MSc (Chemistry)
- Identifier: vital:11330 , http://hdl.handle.net/10353/367 , Water -- Purification , Titanium alloys -- Industrial applications , Titanium , Nanoparticles , Drinking water -- Purification , Drinking water -- Contamination
- Description: Titanium dioxide nanoparticles were prepared using the sol-gel process. The effect of temperature and precursor concentration on particle size was investigated. The optimum conditions were then used to prepare carbon and nitrogen doped titanium dioxide (TiO2) nanoparticles. Doping was done to reduce band gap of the nanoparticles in order to utilize visible light in the photocatalytic degradation of organic compounds. A significant shift of the absorption edge to a longer wavelength (lower energy) from 420 nm to 456 nm and 420 nm to 428 nm was observed for the carbon doped and nitrogen doped TiO2 respectively. In this study, the prepared TiO2 photocatalyst was immobilized on carbon nanofibres to allow isolation and reuse of catalyst. The photocatalytic activity of the catalyst was tested using methyl orange as a model pollutant and was based on the decolourization of the dye as it was degraded. The doped TiO2 exhibited higher photocatalytic activity than the undoped TiO2. The materials prepared were characterized by XRD, TEM, SEM, FT-IR, DSC and TGA while the doped TiO2 was characterized by XPS, ESR and Raman Spectroscopy.
- Full Text:
- Date Issued: 2011