Electrical, photo-thermal and mechanical degradation analysis of degraded single junction amorphous silicon solar modules
- Osayemwenre, Gilbert Omorodion
- Authors: Osayemwenre, Gilbert Omorodion
- Date: 2019
- Subjects: Solar cells Amorphous semiconductors Silicon
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/15211 , vital:40204
- Description: In this present era of sustainable energy development, photovoltaic modules which are based on amorphous silicon cells have immeasurable prospects of contributing meaningfully to the energy demand of the world at large. The global consciousness of environmental safety issues has birthed the rapid demand for the photovoltaic system. However, the production increase is mainly in bulk-type crystalline (c-Si) solar cells. Thus, to meet the high demand of the market, single junction amorphous silicon (a-Si:H) solar cells production must be encouraged through active research in that regard. This could also help to improve its efficiency and reliability. There has recently been a sharp decrease in the production cost of the bulk Si solar cell, but the a-Si:H solar cell still remains the most economically viable in comparison to the other PV technologies. Companies such as Sharp are currently developing large-scale a-Si:H solar modules that can produce an efficiency of 10.5% after the long-term degradation process. To date, a-Si:H is believed to be one of the most promising thin-film PV technologies (Saito et al., 1993; Hamakawa et al., 1994). The cost of a solar PV manufacturing fell by 6% in 2014 (Santa, 2014), this is in accordance with the 2008 cost production forecast; thus, the cost record stands at 0.20 per watt, as reported by the NPD Solar publisher. Amorphous silicon (a-Si) solar modules generate more kilowatt-hour (kWh) of electricity per kilowatt (kW) than crystalline silicon or other technologies of the same capacity of installation. Furthermore, a-Si:H modules have more functional hours per day. Single junction amorphous silicon (a-Si:H) modules can function beyond the peak sun hours, and they also have a better performance on a cloudy day. vii In other words, a 1kW PV system of a-Si:H is expected to generate more electricity per year in comparison to 1kW PV from other technologies, hence there is a low energy payback time. In this study, commercially available single junction amorphous silicon modules were bought from a local market and they were immediately deployed outdoors. The initial reading of the modules, which served as baseline reading, showed an average of 25% decrease in the modules performance, therefore, there is a need for a long term monitoring process to obtain the best and worst performing modules. Measuring the performance parameters of these PV modules under real sun light (IV) provides a better degradation assessment. This conventional assessment cannot provide an in-depth insight responsible for the variation and degradation of the performance parameters. More obscured parameters like recombination current and ideality factor were obtained from the dark IV measurements. However, this is still superficial in a way. The intrinsic parameters were obtained from scanning probe microscopy (SPM) and CV measurements. The study focuses on the degradation analysis of a-Si:H due to an increase in defect density. A rise in the defect concentration is a huge problem because it causes long-term solar cell degradation, which increases the recombination current and decreases the conversion efficiency. Furthermore, it decreases the photo-generating current and reduces the effective efficiency of the solar device. In other words, the electrical output decreases. This research investigates the reduction in a-Si:H modules’ maximum power, and correlates these with a hot spot formation. A PVPM IV tracer was used for the outdoor characterisation of the module’s temperature profile, while the IR camera was used to analyse the hot spot centre. A four probe IV/CV from NMU was used for the indoor assessment of smaller samples cleaved from both the affected and non-affected regions to characterise the electrical variations across the module viii samples. To be precise, in this study, a naturally degraded single junction amorphous silicon module was delaminated and its mechanical properties were analysed and correlated with the contact potential from a Kelvin probe force microscopy (KPFM).
- Full Text:
- Date Issued: 2019
- Authors: Osayemwenre, Gilbert Omorodion
- Date: 2019
- Subjects: Solar cells Amorphous semiconductors Silicon
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/15211 , vital:40204
- Description: In this present era of sustainable energy development, photovoltaic modules which are based on amorphous silicon cells have immeasurable prospects of contributing meaningfully to the energy demand of the world at large. The global consciousness of environmental safety issues has birthed the rapid demand for the photovoltaic system. However, the production increase is mainly in bulk-type crystalline (c-Si) solar cells. Thus, to meet the high demand of the market, single junction amorphous silicon (a-Si:H) solar cells production must be encouraged through active research in that regard. This could also help to improve its efficiency and reliability. There has recently been a sharp decrease in the production cost of the bulk Si solar cell, but the a-Si:H solar cell still remains the most economically viable in comparison to the other PV technologies. Companies such as Sharp are currently developing large-scale a-Si:H solar modules that can produce an efficiency of 10.5% after the long-term degradation process. To date, a-Si:H is believed to be one of the most promising thin-film PV technologies (Saito et al., 1993; Hamakawa et al., 1994). The cost of a solar PV manufacturing fell by 6% in 2014 (Santa, 2014), this is in accordance with the 2008 cost production forecast; thus, the cost record stands at 0.20 per watt, as reported by the NPD Solar publisher. Amorphous silicon (a-Si) solar modules generate more kilowatt-hour (kWh) of electricity per kilowatt (kW) than crystalline silicon or other technologies of the same capacity of installation. Furthermore, a-Si:H modules have more functional hours per day. Single junction amorphous silicon (a-Si:H) modules can function beyond the peak sun hours, and they also have a better performance on a cloudy day. vii In other words, a 1kW PV system of a-Si:H is expected to generate more electricity per year in comparison to 1kW PV from other technologies, hence there is a low energy payback time. In this study, commercially available single junction amorphous silicon modules were bought from a local market and they were immediately deployed outdoors. The initial reading of the modules, which served as baseline reading, showed an average of 25% decrease in the modules performance, therefore, there is a need for a long term monitoring process to obtain the best and worst performing modules. Measuring the performance parameters of these PV modules under real sun light (IV) provides a better degradation assessment. This conventional assessment cannot provide an in-depth insight responsible for the variation and degradation of the performance parameters. More obscured parameters like recombination current and ideality factor were obtained from the dark IV measurements. However, this is still superficial in a way. The intrinsic parameters were obtained from scanning probe microscopy (SPM) and CV measurements. The study focuses on the degradation analysis of a-Si:H due to an increase in defect density. A rise in the defect concentration is a huge problem because it causes long-term solar cell degradation, which increases the recombination current and decreases the conversion efficiency. Furthermore, it decreases the photo-generating current and reduces the effective efficiency of the solar device. In other words, the electrical output decreases. This research investigates the reduction in a-Si:H modules’ maximum power, and correlates these with a hot spot formation. A PVPM IV tracer was used for the outdoor characterisation of the module’s temperature profile, while the IR camera was used to analyse the hot spot centre. A four probe IV/CV from NMU was used for the indoor assessment of smaller samples cleaved from both the affected and non-affected regions to characterise the electrical variations across the module viii samples. To be precise, in this study, a naturally degraded single junction amorphous silicon module was delaminated and its mechanical properties were analysed and correlated with the contact potential from a Kelvin probe force microscopy (KPFM).
- Full Text:
- Date Issued: 2019
A model for retention-to-graduation of undergraduate nursing students at universities in the Eastern Cape Province, South Africa
- Authors: Nkutu, Nonyaniso Trustina
- Date: 2018
- Subjects: Universities and colleges--South Africa--Eastern Cape College students--South Africa--Eastern Cape Nursing students--South Africa--Eastern Cape
- Language: English
- Type: Thesis , Doctoral , Nursing
- Identifier: http://hdl.handle.net/10353/15946 , vital:40566
- Description: The retention of nursing students in the undergraduate programme in universities is a global concern for the health care system, because of the low rate of nurse graduates. The strategies for retention for nursing students in undergraduate programmes in South African universities arguably have limited success in curbing failure to graduate. The failure to graduate rate of nursing students is a global phenomenon, where for example in 2009, the rate of failure to graduate in the United States of America was 30%. However, countries like Jamaica and Australia reported good retention rates through the use of various successful initiatives, such as student bursaries, student loans, scholarships and academic assistance. Previous studies in South Africa have showed that the incidence of nursing students’ failure to graduate rate is an ongoing challenge since the 1960s. Further, research has found that, despite the high annual enrolment of students into universities, only few nursing students graduate on time, while others fail to graduate. This phenomenon affects the rendering and quality of services to patients and clients in the health care facilities. When students fail to graduate from the programme, patients and clients get deprived of the services they would have got, had the students completed and graduated from the programme. On the other hand, the students themselves get frustrated due to the failure to complete the programme. Nursing Education Institutions (NEIs) also share in the disappointment and the loss of even one student who fails to graduate, because it is their obligation to graduate more nurses. Previous studies have sought to understand why students fail to complete their studies, and many factors have been identified. Therefore, there is need to further understand the factors associated with nursing student failure to complete their programme in different contexts such as South Africa. It is for this reason that the aim of this study was to develop a model for retention of nursing students in order to facilitate progression towards graduation in the undergraduate programme at the universities in the Eastern Cape Province of South Africa. The study endeavoured to answer the following research questions: What are the factors associated with retention-to-graduation of nursing students from the undergraduate nursing programme in the Eastern Cape Province, South Africa? What are the strategies to enhance retention to graduation of nursing students in universities in the Eastern Cape Province, South Africa? What conceptual framework can be developed for retention-to-graduation of nursing students from the undergraduate programme in the Eastern Cape Province, South Africa? What model could be developed for retention-to-graduation of nursing students from the undergraduate nursing programme in the Eastern Cape Province, South Africa? What guidelines should be formulated for the implementation of the model for retention-to-graduation of nursing students from the undergraduate nursing programme in the Eastern Cape Province, South Africa? To answer these questions, quantitative research approach with a descriptive, contextual and theory generation design was used. The study was conducted in four phases. Phase 1 used deductive concept identification to describe factors and strategies to enhance retention –to-graduation of nursing students in the undergraduate nursing programme. Phase 2 used inductive concept analysis for the development of a conceptual framework. In phase 3 reasoning strategies (inductive, deductive, derivation, synthesis and analysis) informed by data as well as the literature were used in order to generate a theory for model development. In phase 4, the guidelines for developing a preliminary model were formulated for theory implementation. The study setting was in the Eastern Cape universities, within faculties of Health Sciences. The researcher adapted Jeffreys’ Nursing Undergraduate Retention and Success (NURS) 2012 model as a data collecting instrument, which was pilot tested for reliability and validity. Permission to utilize the model was obtained. The targeted population was full time nursing students in the undergraduate nursing programme. A multistage stratified random sample from first year to fourth year level was used. The inclusion criterion was based on one being full time nursing student, aged between 18 and 50 years and from the Eastern Cape Province universities. Student nurses in colleges and part-time students were excluded from this study. The study adhered to research ethics and procedures by for example obtaining ethical clearance from the ethics committee of the University of Fort Hare and the other two selected universities. The ethical components were met: The Ethical clearance based on the following aspects: written consent to undertake the study; approval from the two of the selected universities; and permission to conduct a pilot study from the University of Fort Hare. Permission was also sought and obtained from Quality Assurance Unit in the Eastern Cape Province, in Bisho. The principle of beneficence; respect for human dignity; the right to self-determination based on the ethical principle of respect for persons; the principle of self-determination; the principle of justice, the right to fair treatment, the right to privacy, the right to informed consent were all considered. Data analysis was done through Statistical Analysis Systems (SAS) version 9.3 for quantitative data and Atlas Ti was used to analyse and quantify the open-ended section of the questionnaire. The results showed multidimensional factors associated with retention-to-graduation of the nursing students in the undergraduate programme. Strategies to enhance retention –to graduation were also indicated although there was no one perfect example since they were not evaluated for effectiveness. A retention-to-graduation model for nursing students in the undergraduate nursing programme was developed based on the results.
- Full Text:
- Date Issued: 2018
- Authors: Nkutu, Nonyaniso Trustina
- Date: 2018
- Subjects: Universities and colleges--South Africa--Eastern Cape College students--South Africa--Eastern Cape Nursing students--South Africa--Eastern Cape
- Language: English
- Type: Thesis , Doctoral , Nursing
- Identifier: http://hdl.handle.net/10353/15946 , vital:40566
- Description: The retention of nursing students in the undergraduate programme in universities is a global concern for the health care system, because of the low rate of nurse graduates. The strategies for retention for nursing students in undergraduate programmes in South African universities arguably have limited success in curbing failure to graduate. The failure to graduate rate of nursing students is a global phenomenon, where for example in 2009, the rate of failure to graduate in the United States of America was 30%. However, countries like Jamaica and Australia reported good retention rates through the use of various successful initiatives, such as student bursaries, student loans, scholarships and academic assistance. Previous studies in South Africa have showed that the incidence of nursing students’ failure to graduate rate is an ongoing challenge since the 1960s. Further, research has found that, despite the high annual enrolment of students into universities, only few nursing students graduate on time, while others fail to graduate. This phenomenon affects the rendering and quality of services to patients and clients in the health care facilities. When students fail to graduate from the programme, patients and clients get deprived of the services they would have got, had the students completed and graduated from the programme. On the other hand, the students themselves get frustrated due to the failure to complete the programme. Nursing Education Institutions (NEIs) also share in the disappointment and the loss of even one student who fails to graduate, because it is their obligation to graduate more nurses. Previous studies have sought to understand why students fail to complete their studies, and many factors have been identified. Therefore, there is need to further understand the factors associated with nursing student failure to complete their programme in different contexts such as South Africa. It is for this reason that the aim of this study was to develop a model for retention of nursing students in order to facilitate progression towards graduation in the undergraduate programme at the universities in the Eastern Cape Province of South Africa. The study endeavoured to answer the following research questions: What are the factors associated with retention-to-graduation of nursing students from the undergraduate nursing programme in the Eastern Cape Province, South Africa? What are the strategies to enhance retention to graduation of nursing students in universities in the Eastern Cape Province, South Africa? What conceptual framework can be developed for retention-to-graduation of nursing students from the undergraduate programme in the Eastern Cape Province, South Africa? What model could be developed for retention-to-graduation of nursing students from the undergraduate nursing programme in the Eastern Cape Province, South Africa? What guidelines should be formulated for the implementation of the model for retention-to-graduation of nursing students from the undergraduate nursing programme in the Eastern Cape Province, South Africa? To answer these questions, quantitative research approach with a descriptive, contextual and theory generation design was used. The study was conducted in four phases. Phase 1 used deductive concept identification to describe factors and strategies to enhance retention –to-graduation of nursing students in the undergraduate nursing programme. Phase 2 used inductive concept analysis for the development of a conceptual framework. In phase 3 reasoning strategies (inductive, deductive, derivation, synthesis and analysis) informed by data as well as the literature were used in order to generate a theory for model development. In phase 4, the guidelines for developing a preliminary model were formulated for theory implementation. The study setting was in the Eastern Cape universities, within faculties of Health Sciences. The researcher adapted Jeffreys’ Nursing Undergraduate Retention and Success (NURS) 2012 model as a data collecting instrument, which was pilot tested for reliability and validity. Permission to utilize the model was obtained. The targeted population was full time nursing students in the undergraduate nursing programme. A multistage stratified random sample from first year to fourth year level was used. The inclusion criterion was based on one being full time nursing student, aged between 18 and 50 years and from the Eastern Cape Province universities. Student nurses in colleges and part-time students were excluded from this study. The study adhered to research ethics and procedures by for example obtaining ethical clearance from the ethics committee of the University of Fort Hare and the other two selected universities. The ethical components were met: The Ethical clearance based on the following aspects: written consent to undertake the study; approval from the two of the selected universities; and permission to conduct a pilot study from the University of Fort Hare. Permission was also sought and obtained from Quality Assurance Unit in the Eastern Cape Province, in Bisho. The principle of beneficence; respect for human dignity; the right to self-determination based on the ethical principle of respect for persons; the principle of self-determination; the principle of justice, the right to fair treatment, the right to privacy, the right to informed consent were all considered. Data analysis was done through Statistical Analysis Systems (SAS) version 9.3 for quantitative data and Atlas Ti was used to analyse and quantify the open-ended section of the questionnaire. The results showed multidimensional factors associated with retention-to-graduation of the nursing students in the undergraduate programme. Strategies to enhance retention –to graduation were also indicated although there was no one perfect example since they were not evaluated for effectiveness. A retention-to-graduation model for nursing students in the undergraduate nursing programme was developed based on the results.
- Full Text:
- Date Issued: 2018
The implementation of information and communication technology (ICT) intergrated teaching and learning in textiles and clothing programmes at one University of Science and Techology in Zimbabwe
- Authors: Chipo, Dzikite
- Date: 2016
- Subjects: Information technology -- Study and teaching -- Zimbabwe Internet in education -- Zimbabwe Teaching -- Zimbabwe -- Aids and devices Education, Higher -- Zimbabwe
- Language: English
- Type: Thesis , Doctoral , M Ed
- Identifier: http://hdl.handle.net/10353/2127 , vital:27612
- Description: Textiles and Clothing programmes in universities worldwide experience numerous challenges in effectively implementing ICT integrated teaching and learning. The aim of this study was to explore how ICT integrated teaching and learning was implemented in Textiles and Clothing programmes at one university of Science and Technology in Zimbabwe, with a view to developing a suitable model to enhance effective implementation. The study was informed by the Activity theory and triangulated by the Technological pedagogical content knowledge framework (TPACK) and the Functionality framework. The study made use of the interpretive research paradigm, the qualitative approach and intrinsic case study design, to generate the necessary data. The participants of the study were purposively and quota sampled from the Textiles and Clothing department of the selected university of Science and Technology, and consisted of seven lecturers, three administrators, two ICT technicians and thirty-two students. Four methods were used to generate data namely in-depth interviews, focus group interviews, participant observation, and document analysis. After coding, data were analysed for content using thematic analysis. The study established that there were no specific ICT hardware and software packages acquired by the universityfor the Textiles and Clothing programmes. Instead, general design related softwares such as CorelDraw, Photoshop, Adobe Illustrator and Mac Paints were used to support the implementation of ICT integrated teaching and learning. The findings of the study further revealed that lecturers lacked thorough technological pedagogical knowledge to apply a variety of ICT in the teaching and learning of students. The study established that there was lack of an effective mechanism for providing monitoring and evaluation as the peer review and evaluation mechanism that was used in the Textiles and Clothing programmes did not identify the specific indicators for the implementation of ICT integrated teaching and learning. Among the conclusions emanating from the findings were that the Textiles and Clothing programmes suffered serious shortage of suitable ICT hardware and subject-specific ICT software applications to facilitate the teaching of practical components thereby compromising the effective implementation of ICT integrated teaching and learning to foster effective skill acquisition in relation to ICT among students. It was also concluded that lecturers were finding difficulties in implementing ICT integrated teaching and learning as they lacked thorough technological-pedagogical-content knowledge and skills that would enable them to select appropriate technological resources and technological pedagogical strategies to teach students appropriate content. The study recommended that the Textiles and Clothing department, through the support of the university, should acquire subject related educational hardware and software like Gerber or Lectra to teach the practical courses of the programmes. The university should organise professional development programmes focussing on TPACK to assist lecturers to develop competences in ICT necessary for implementing ICT integrated teaching and learning. A model was proposed to enhance the effective implementation of ICT integrated teaching and learning into the Textiles and Clothing programmes at the University.
- Full Text:
- Date Issued: 2016
- Authors: Chipo, Dzikite
- Date: 2016
- Subjects: Information technology -- Study and teaching -- Zimbabwe Internet in education -- Zimbabwe Teaching -- Zimbabwe -- Aids and devices Education, Higher -- Zimbabwe
- Language: English
- Type: Thesis , Doctoral , M Ed
- Identifier: http://hdl.handle.net/10353/2127 , vital:27612
- Description: Textiles and Clothing programmes in universities worldwide experience numerous challenges in effectively implementing ICT integrated teaching and learning. The aim of this study was to explore how ICT integrated teaching and learning was implemented in Textiles and Clothing programmes at one university of Science and Technology in Zimbabwe, with a view to developing a suitable model to enhance effective implementation. The study was informed by the Activity theory and triangulated by the Technological pedagogical content knowledge framework (TPACK) and the Functionality framework. The study made use of the interpretive research paradigm, the qualitative approach and intrinsic case study design, to generate the necessary data. The participants of the study were purposively and quota sampled from the Textiles and Clothing department of the selected university of Science and Technology, and consisted of seven lecturers, three administrators, two ICT technicians and thirty-two students. Four methods were used to generate data namely in-depth interviews, focus group interviews, participant observation, and document analysis. After coding, data were analysed for content using thematic analysis. The study established that there were no specific ICT hardware and software packages acquired by the universityfor the Textiles and Clothing programmes. Instead, general design related softwares such as CorelDraw, Photoshop, Adobe Illustrator and Mac Paints were used to support the implementation of ICT integrated teaching and learning. The findings of the study further revealed that lecturers lacked thorough technological pedagogical knowledge to apply a variety of ICT in the teaching and learning of students. The study established that there was lack of an effective mechanism for providing monitoring and evaluation as the peer review and evaluation mechanism that was used in the Textiles and Clothing programmes did not identify the specific indicators for the implementation of ICT integrated teaching and learning. Among the conclusions emanating from the findings were that the Textiles and Clothing programmes suffered serious shortage of suitable ICT hardware and subject-specific ICT software applications to facilitate the teaching of practical components thereby compromising the effective implementation of ICT integrated teaching and learning to foster effective skill acquisition in relation to ICT among students. It was also concluded that lecturers were finding difficulties in implementing ICT integrated teaching and learning as they lacked thorough technological-pedagogical-content knowledge and skills that would enable them to select appropriate technological resources and technological pedagogical strategies to teach students appropriate content. The study recommended that the Textiles and Clothing department, through the support of the university, should acquire subject related educational hardware and software like Gerber or Lectra to teach the practical courses of the programmes. The university should organise professional development programmes focussing on TPACK to assist lecturers to develop competences in ICT necessary for implementing ICT integrated teaching and learning. A model was proposed to enhance the effective implementation of ICT integrated teaching and learning into the Textiles and Clothing programmes at the University.
- Full Text:
- Date Issued: 2016
The implementation of information and communication technology (ICT) intergrated teaching and learning in textiles and clothing programmes at one University of Science and Techology in Zimbabwe
- Authors: Chipo, Dzikite
- Date: 2016
- Subjects: Internet in education -- Zimbabwe Information technology -- Study and teaching -- Zimbabwe Internet in education -- Zimbabwe
- Language: English
- Type: Thesis , Doctoral , Degree
- Identifier: http://hdl.handle.net/10353/5226 , vital:29115
- Description: challenges in effectively implementing ICT integrated teaching and learning. The aim of this study was to explore how ICT integrated teaching and learning was implemented in Textiles and Clothing programmes at one university of Science and Technology in Zimbabwe, with a view to developing a suitable model to enhance effective implementation. The study was informed by the Activity theory and triangulated by the Technological pedagogical content knowledge framework (TPACK) and the Functionality framework. The study made use of the interpretive research paradigm, the qualitative approach and intrinsic case study design, to generate the necessary data. The participants of the study were purposively and quota sampled from the Textiles and Clothing department of the selected university of Science and Technology, and consisted of seven lecturers, three administrators, two ICT technicians and thirty-two students. Four methods were used to generate data namely in-depth interviews, focus group interviews, participant observation, and document analysis. After coding, data were analysed for content using thematic analysis. The study established that there were no specific ICT hardware and software packages acquired by the universityfor the Textiles and Clothing programmes. Instead, general design related softwares such as CorelDraw, Photoshop, Adobe Illustrator and Mac Paints were used to support the implementation of ICT integrated teaching and learning. The findings of the study further revealed that lecturers lacked thorough technological pedagogical knowledge to apply a variety of ICT in the teaching and learning of students. The study established that there was lack of an effective mechanism for providing monitoring and evaluation as the peer review and evaluation mechanism that was used in the Textiles and Clothing programmes did not identify the specific indicators for the implementation of ICT integrated teaching and learning. Among the conclusions emanating from the findings were that the Textiles and Clothing programmes suffered serious shortage of suitable ICT hardware and subject-specific ICT software applications to facilitate the teaching of practical components thereby compromising the effective implementation of ICT integrated teaching and learning to foster effective skill acquisition in relation to ICT among students. It was also concluded that lecturers were finding difficulties in implementing ICT integrated teaching and learning as they lacked thorough technological-pedagogical-content knowledge and skills that would enable them to select appropriate technological resources and technological pedagogical strategies to teach students appropriate content. The study recommended that the Textiles and Clothing department, through the support of the university, should acquire subject related educational hardware and software like Gerber or Lectra to teach the practical courses of the programmes. The university should organise professional development programmes focussing on TPACK to assist lecturers to develop competences in ICT necessary for implementing ICT integrated teaching and learning. A model was proposed to enhance the effective implementation of ICT integrated teaching and learning into the Textiles and Clothing programmes at the University.
- Full Text: false
- Date Issued: 2016
- Authors: Chipo, Dzikite
- Date: 2016
- Subjects: Internet in education -- Zimbabwe Information technology -- Study and teaching -- Zimbabwe Internet in education -- Zimbabwe
- Language: English
- Type: Thesis , Doctoral , Degree
- Identifier: http://hdl.handle.net/10353/5226 , vital:29115
- Description: challenges in effectively implementing ICT integrated teaching and learning. The aim of this study was to explore how ICT integrated teaching and learning was implemented in Textiles and Clothing programmes at one university of Science and Technology in Zimbabwe, with a view to developing a suitable model to enhance effective implementation. The study was informed by the Activity theory and triangulated by the Technological pedagogical content knowledge framework (TPACK) and the Functionality framework. The study made use of the interpretive research paradigm, the qualitative approach and intrinsic case study design, to generate the necessary data. The participants of the study were purposively and quota sampled from the Textiles and Clothing department of the selected university of Science and Technology, and consisted of seven lecturers, three administrators, two ICT technicians and thirty-two students. Four methods were used to generate data namely in-depth interviews, focus group interviews, participant observation, and document analysis. After coding, data were analysed for content using thematic analysis. The study established that there were no specific ICT hardware and software packages acquired by the universityfor the Textiles and Clothing programmes. Instead, general design related softwares such as CorelDraw, Photoshop, Adobe Illustrator and Mac Paints were used to support the implementation of ICT integrated teaching and learning. The findings of the study further revealed that lecturers lacked thorough technological pedagogical knowledge to apply a variety of ICT in the teaching and learning of students. The study established that there was lack of an effective mechanism for providing monitoring and evaluation as the peer review and evaluation mechanism that was used in the Textiles and Clothing programmes did not identify the specific indicators for the implementation of ICT integrated teaching and learning. Among the conclusions emanating from the findings were that the Textiles and Clothing programmes suffered serious shortage of suitable ICT hardware and subject-specific ICT software applications to facilitate the teaching of practical components thereby compromising the effective implementation of ICT integrated teaching and learning to foster effective skill acquisition in relation to ICT among students. It was also concluded that lecturers were finding difficulties in implementing ICT integrated teaching and learning as they lacked thorough technological-pedagogical-content knowledge and skills that would enable them to select appropriate technological resources and technological pedagogical strategies to teach students appropriate content. The study recommended that the Textiles and Clothing department, through the support of the university, should acquire subject related educational hardware and software like Gerber or Lectra to teach the practical courses of the programmes. The university should organise professional development programmes focussing on TPACK to assist lecturers to develop competences in ICT necessary for implementing ICT integrated teaching and learning. A model was proposed to enhance the effective implementation of ICT integrated teaching and learning into the Textiles and Clothing programmes at the University.
- Full Text: false
- Date Issued: 2016
An investigation of a framework for the implementation of service management in the information and communication technology sector
- Authors: Benyon, Robert Victor
- Date: 2006
- Subjects: Support services (Management) , Service industries -- Management , Information technology -- Management , Management information systems , Communication in management
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: vital:1137 , http://hdl.handle.net/10962/d1002766 , Support services (Management) , Service industries -- Management , Information technology -- Management , Management information systems , Communication in management
- Description: Service Management (SM) is an integrated, cyclical and collaborative approach to the management of service requirements and levels. It involves the definition of client expectations, the satisfying of those expectations and the perpetual refining of the business agreement (Sturm 2001). SM in the ICT sector is a comprehensive process that extends beyond the development of Service Agreements (SAs). A number of identifiable steps constitute the progressive implementation of a managed services environment, the key components of which are a readiness to provide services, the accurate elicitation, management and satisfying of client requirements and the continual improvements to the business relationship. Unfortunately, a number of SM initiatives fail. These failures can be attributed to a lack of SM understanding, the absence of a fully implemented SM strategy, poor communication and people issues. This research describes an investigation of SM implementation. A number of recognised frameworks are explored and critically analysed. The common strengths of these frameworks and the results of an exploratory pilot study are used to construct an SM implementation framework. This framework is then tested empirically by means of an online survey, and revised in the light of the results of this survey. The framework comprises two distinct phases, namely a Foundation phase and a Managed Services phase. The Foundation phase comprises 8 critical preparatory activities that take a service provider to state of readiness to provide and manage ICT services. The Managed Services phase comprises 5 key cyclical steps for the management of ICT services, including Planning, Analysis, Design, Implementation and Review.
- Full Text:
- Date Issued: 2006
- Authors: Benyon, Robert Victor
- Date: 2006
- Subjects: Support services (Management) , Service industries -- Management , Information technology -- Management , Management information systems , Communication in management
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: vital:1137 , http://hdl.handle.net/10962/d1002766 , Support services (Management) , Service industries -- Management , Information technology -- Management , Management information systems , Communication in management
- Description: Service Management (SM) is an integrated, cyclical and collaborative approach to the management of service requirements and levels. It involves the definition of client expectations, the satisfying of those expectations and the perpetual refining of the business agreement (Sturm 2001). SM in the ICT sector is a comprehensive process that extends beyond the development of Service Agreements (SAs). A number of identifiable steps constitute the progressive implementation of a managed services environment, the key components of which are a readiness to provide services, the accurate elicitation, management and satisfying of client requirements and the continual improvements to the business relationship. Unfortunately, a number of SM initiatives fail. These failures can be attributed to a lack of SM understanding, the absence of a fully implemented SM strategy, poor communication and people issues. This research describes an investigation of SM implementation. A number of recognised frameworks are explored and critically analysed. The common strengths of these frameworks and the results of an exploratory pilot study are used to construct an SM implementation framework. This framework is then tested empirically by means of an online survey, and revised in the light of the results of this survey. The framework comprises two distinct phases, namely a Foundation phase and a Managed Services phase. The Foundation phase comprises 8 critical preparatory activities that take a service provider to state of readiness to provide and manage ICT services. The Managed Services phase comprises 5 key cyclical steps for the management of ICT services, including Planning, Analysis, Design, Implementation and Review.
- Full Text:
- Date Issued: 2006
The significance of the local trade in natural resource products for livelihoods and poverty alleviation in South Africa
- Authors: Shackleton, Sheona E
- Date: 2006
- Subjects: Poverty -- South Africa Rural poor -- South Africa Natural resources -- South Africa Selling -- Handicraft South Africa -- Commerce
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4776 , http://hdl.handle.net/10962/d1011731
- Description: What role can the commercialisation of natural resource products play in the efforts to reduce poverty and vulnerability and how can this be enhanced? With poverty alleviation at the top of the global development agenda, this is a question posed by many scholars, practitioners, donor agencies and government departments operating at the environment-development interface. However, recent commentary on this issue is mixed and ambiguous, with some observers being quite optimistic regarding the potential of these products, while others hold a counter view. This thesis explores the livelihood contributions and poverty alleviation potential of four products traded locally in the Bushbuckridge municipality, South Africa; namely traditional brooms, reed mats, woodcraft and a beer made from the fruits of Sclerocarya birrea. A common approach, employing both quantitative and qualitative methods, was used to investigate the harvesting, processing and marketing arrangements, sustainability and livelihood contributions of each product. The results illustrate that any inference regarding the potential of the trade to alleviate poverty depends on how poverty is defined and interpreted, and on whether the role of these products is assessed from a holistic livelihood perspective that includes notions of vulnerability, alternatives and choice, diversification and the needs of rural producers themselves. Overall, the products studied were key in enhancing the livelihood security of the poorest members of society, forming an important safety net and assisting in raising household incomes to levels equivalent to the wider population, but generally were unlikely, on their own, to provide a route out of poverty. However, there were notable exceptions, with marked variation evident both within and across products. Incomes often surpassed local wage rates, and a minority of producers were obtaining returns equivalent to or greater than the official minimum wage. Other benefits, such as the opportunity to work from home or to diversify the livelihood portfolio, were also crucial, with the trade representing different livelihood strategies for different households. When viewed within the context of rising unemployment and HIV/AIDS these findings assume greater significance. While the trades were complex and growth limited, livelihood benefits could be improved on a sustainable basis if the sector was given the attention and support it deserves.
- Full Text:
- Date Issued: 2006
- Authors: Shackleton, Sheona E
- Date: 2006
- Subjects: Poverty -- South Africa Rural poor -- South Africa Natural resources -- South Africa Selling -- Handicraft South Africa -- Commerce
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4776 , http://hdl.handle.net/10962/d1011731
- Description: What role can the commercialisation of natural resource products play in the efforts to reduce poverty and vulnerability and how can this be enhanced? With poverty alleviation at the top of the global development agenda, this is a question posed by many scholars, practitioners, donor agencies and government departments operating at the environment-development interface. However, recent commentary on this issue is mixed and ambiguous, with some observers being quite optimistic regarding the potential of these products, while others hold a counter view. This thesis explores the livelihood contributions and poverty alleviation potential of four products traded locally in the Bushbuckridge municipality, South Africa; namely traditional brooms, reed mats, woodcraft and a beer made from the fruits of Sclerocarya birrea. A common approach, employing both quantitative and qualitative methods, was used to investigate the harvesting, processing and marketing arrangements, sustainability and livelihood contributions of each product. The results illustrate that any inference regarding the potential of the trade to alleviate poverty depends on how poverty is defined and interpreted, and on whether the role of these products is assessed from a holistic livelihood perspective that includes notions of vulnerability, alternatives and choice, diversification and the needs of rural producers themselves. Overall, the products studied were key in enhancing the livelihood security of the poorest members of society, forming an important safety net and assisting in raising household incomes to levels equivalent to the wider population, but generally were unlikely, on their own, to provide a route out of poverty. However, there were notable exceptions, with marked variation evident both within and across products. Incomes often surpassed local wage rates, and a minority of producers were obtaining returns equivalent to or greater than the official minimum wage. Other benefits, such as the opportunity to work from home or to diversify the livelihood portfolio, were also crucial, with the trade representing different livelihood strategies for different households. When viewed within the context of rising unemployment and HIV/AIDS these findings assume greater significance. While the trades were complex and growth limited, livelihood benefits could be improved on a sustainable basis if the sector was given the attention and support it deserves.
- Full Text:
- Date Issued: 2006
A history of the direct taxation of the African people of Kenya, 1895-1973
- Authors: Tarus, Isaac Kipsang
- Date: 2005
- Subjects: Mau Mau -- History Taxation -- Kenya Tax collection -- Kenya Fiscal policy -- Kenya Kenya -- Economic policy Kenya -- History -- 1895-1963
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:2561 , http://hdl.handle.net/10962/d1002414
- Description: This study examines the origin, the manifestation and impact of the direct taxation of Africans in Kenya. While the state had several reasons for imposing taxation on Africans, the basic factor weighed on the need for a definitive source of revenue. For most of the colonial period, this aggregated to about 37½ percent of the total revenues. The thesis shows how taxes were collected from Africans, how this led to participation in the cash economy and how they continually resisted and evaded such taxation. Tax collection was synonymous with colonialism and this was manifested through the central role of chiefs, who used taxes and force to coerce Africans into migrant wage labour. Through taxation policies, legislation and African resourcefulness, migrant wage labour served the needs of a colonial capitalist settler economy. In this way, the colonial state revealed its capacity for dominance, power and exploitation. Evidence has been adduced to show that African taxation was an important factor in Kenya’s administrative, political and economic development. The policy of African taxation, land loss and poor working conditions are remembered as having interfered with African mechanisms for accumulating wealth. One of the main objections of the payment of taxes was the manner of its collection. Those unable to pay were imprisoned or detained while many took to instant flight at the sight of the tax collector. The thesis shows that in spite of all these harsh tax collection methods, peasants remained largely resilient and industrious. The Mau Mau movement was the culmination of various peasant grievances in which the colonial state used steep taxation as a counter-insurgency measure. Kenya’s independence in 1963, however, never altered the predatory nature of the state. Subtle, opportunistic and overt ways continued to be used to extract taxes from the peasants and the working class. It was not until 1973 that the much-hated colonial poll tax that had been renamed as graduated poll tax was abolished and replaced by indirect taxation. Finally, taxation like other colonial legacies has endured and has become one of the most important sources of revenue for the government to manage its fiscal policies.
- Full Text:
- Date Issued: 2005
- Authors: Tarus, Isaac Kipsang
- Date: 2005
- Subjects: Mau Mau -- History Taxation -- Kenya Tax collection -- Kenya Fiscal policy -- Kenya Kenya -- Economic policy Kenya -- History -- 1895-1963
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:2561 , http://hdl.handle.net/10962/d1002414
- Description: This study examines the origin, the manifestation and impact of the direct taxation of Africans in Kenya. While the state had several reasons for imposing taxation on Africans, the basic factor weighed on the need for a definitive source of revenue. For most of the colonial period, this aggregated to about 37½ percent of the total revenues. The thesis shows how taxes were collected from Africans, how this led to participation in the cash economy and how they continually resisted and evaded such taxation. Tax collection was synonymous with colonialism and this was manifested through the central role of chiefs, who used taxes and force to coerce Africans into migrant wage labour. Through taxation policies, legislation and African resourcefulness, migrant wage labour served the needs of a colonial capitalist settler economy. In this way, the colonial state revealed its capacity for dominance, power and exploitation. Evidence has been adduced to show that African taxation was an important factor in Kenya’s administrative, political and economic development. The policy of African taxation, land loss and poor working conditions are remembered as having interfered with African mechanisms for accumulating wealth. One of the main objections of the payment of taxes was the manner of its collection. Those unable to pay were imprisoned or detained while many took to instant flight at the sight of the tax collector. The thesis shows that in spite of all these harsh tax collection methods, peasants remained largely resilient and industrious. The Mau Mau movement was the culmination of various peasant grievances in which the colonial state used steep taxation as a counter-insurgency measure. Kenya’s independence in 1963, however, never altered the predatory nature of the state. Subtle, opportunistic and overt ways continued to be used to extract taxes from the peasants and the working class. It was not until 1973 that the much-hated colonial poll tax that had been renamed as graduated poll tax was abolished and replaced by indirect taxation. Finally, taxation like other colonial legacies has endured and has become one of the most important sources of revenue for the government to manage its fiscal policies.
- Full Text:
- Date Issued: 2005
An entrepreneurial framework for deciding on the implementation of large format digital printing internationally
- Adendorff, Christian Michael
- Authors: Adendorff, Christian Michael
- Date: 2003
- Subjects: Entrepreneurship , Success in business , Business -- Technological innovations , Digital printing
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: vital:1169 , http://hdl.handle.net/10962/d1002785 , Entrepreneurship , Success in business , Business -- Technological innovations , Digital printing
- Description: This study focuses on entrepreneurs within the SME sector using large format digital printing (LFDP) because of the changes in technology that influences the decisionmaking processes of the entrepreneur in the purchasing of a new LFDP. These fast changes are likely to continue and can cause technologies to become obsolete overnight. The entrepreneurs within the LFDP industry find themselves in the midst of these fast changes and are faced with a dilemma. On the one hand, they need to make sure that the technology used produces consistent and quality products. On the other hand, the entrepreneur needs to ensure an optimal return on investments. From the literature and the findings of the study, the researcher recommends a change to an existing model on a consultant involvement purchase of high technology products, which is then adapted to integrate resource-forecasting areas together with timing and type of information required as well as external environment scanning. The existing model’s focus is on the individual’s ability to make decisions based on their own knowledge. However, by integrating technology forecasting components, and scanning the business environment and resource forecasting needed the decision-maker will be better equipped to make decisions that also takes into account the external environment. This will also allow them to plan and manage growth in a systematic way. Therefore the proposed model takes into account individual capabilities and technology forecasting components that can facilitate the decision-making process. The adapted model on decision-making clearly delineates that the combination of entrepreneurial qualities and technology forecasting techniques in the LFDP industry will ultimately assist the entrepreneur on various levels in deciding on a new LFDP.
- Full Text:
- Date Issued: 2003
- Authors: Adendorff, Christian Michael
- Date: 2003
- Subjects: Entrepreneurship , Success in business , Business -- Technological innovations , Digital printing
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: vital:1169 , http://hdl.handle.net/10962/d1002785 , Entrepreneurship , Success in business , Business -- Technological innovations , Digital printing
- Description: This study focuses on entrepreneurs within the SME sector using large format digital printing (LFDP) because of the changes in technology that influences the decisionmaking processes of the entrepreneur in the purchasing of a new LFDP. These fast changes are likely to continue and can cause technologies to become obsolete overnight. The entrepreneurs within the LFDP industry find themselves in the midst of these fast changes and are faced with a dilemma. On the one hand, they need to make sure that the technology used produces consistent and quality products. On the other hand, the entrepreneur needs to ensure an optimal return on investments. From the literature and the findings of the study, the researcher recommends a change to an existing model on a consultant involvement purchase of high technology products, which is then adapted to integrate resource-forecasting areas together with timing and type of information required as well as external environment scanning. The existing model’s focus is on the individual’s ability to make decisions based on their own knowledge. However, by integrating technology forecasting components, and scanning the business environment and resource forecasting needed the decision-maker will be better equipped to make decisions that also takes into account the external environment. This will also allow them to plan and manage growth in a systematic way. Therefore the proposed model takes into account individual capabilities and technology forecasting components that can facilitate the decision-making process. The adapted model on decision-making clearly delineates that the combination of entrepreneurial qualities and technology forecasting techniques in the LFDP industry will ultimately assist the entrepreneur on various levels in deciding on a new LFDP.
- Full Text:
- Date Issued: 2003
The potential of the township landscape for fieldwork in the teaching of senior secondary school geography: a case study in Duncan Village/Gompo, East London
- Authors: King, Llewellyn
- Date: 1994
- Subjects: Geography -- Fieldwork -- Study and teaching Geography -- Study and teaching (Secondary) Children with social disabilities -- Education (Secondary) -- South Africa Duncan Village (East London, South Africa) -- Social conditions
- Language: English
- Type: Thesis , Masters , MEd
- Identifier: vital:1709 , http://hdl.handle.net/10962/d1003592
- Description: The research emerged out of a need to address firsthand classroom concerns. The problem identified was that the D.E.T. geography syllabus had a Western-orientated world-view and, as such, was largely inappropriate to the experiences of township pupils. As a result, education in townships tends to maintain the status quo and the marginal position of the majority of South Africans. Recent unpublished research has shown that fieldwork is an effective compensatory tool. If fieldwork is used in the township , it can utilize the local environment which is familiar to pupils. Fieldwork, as an approach, has an additional advantage of being a vehicle for the empowerment of users. The research sets out to explore the potential of the township environment as a site in which fieldwork can be undertaken. Numerous opportunities are identified and these have been developed into fieldwork exercises. Out of the preparatory work, a need arose to establish the viability of doing township fieldwork. The concern is that, in spite of fieldwork appearing in the secondary school syllabus for a number of years, it is a largely unexplored teaching approach. This necessitated the testing and evaluation of fieldwork opportunities in the township environment. The chaotic conditions of township education impinged upon the research process, causing its premature termination. The latter part of the research process raises questions of an ethical nature. Notwithstanding these problems, several positive factors emerge; the negative aspects should not be allowed to overshadow the benefits of the research. An emancipatory action research framework is used to evaluate the research process. The study concludes by highlighting the main issues raised in the research and makes recommendations concerning topics requiring further investigation.
- Full Text:
- Date Issued: 1994
- Authors: King, Llewellyn
- Date: 1994
- Subjects: Geography -- Fieldwork -- Study and teaching Geography -- Study and teaching (Secondary) Children with social disabilities -- Education (Secondary) -- South Africa Duncan Village (East London, South Africa) -- Social conditions
- Language: English
- Type: Thesis , Masters , MEd
- Identifier: vital:1709 , http://hdl.handle.net/10962/d1003592
- Description: The research emerged out of a need to address firsthand classroom concerns. The problem identified was that the D.E.T. geography syllabus had a Western-orientated world-view and, as such, was largely inappropriate to the experiences of township pupils. As a result, education in townships tends to maintain the status quo and the marginal position of the majority of South Africans. Recent unpublished research has shown that fieldwork is an effective compensatory tool. If fieldwork is used in the township , it can utilize the local environment which is familiar to pupils. Fieldwork, as an approach, has an additional advantage of being a vehicle for the empowerment of users. The research sets out to explore the potential of the township environment as a site in which fieldwork can be undertaken. Numerous opportunities are identified and these have been developed into fieldwork exercises. Out of the preparatory work, a need arose to establish the viability of doing township fieldwork. The concern is that, in spite of fieldwork appearing in the secondary school syllabus for a number of years, it is a largely unexplored teaching approach. This necessitated the testing and evaluation of fieldwork opportunities in the township environment. The chaotic conditions of township education impinged upon the research process, causing its premature termination. The latter part of the research process raises questions of an ethical nature. Notwithstanding these problems, several positive factors emerge; the negative aspects should not be allowed to overshadow the benefits of the research. An emancipatory action research framework is used to evaluate the research process. The study concludes by highlighting the main issues raised in the research and makes recommendations concerning topics requiring further investigation.
- Full Text:
- Date Issued: 1994
Some aspects of the mission policy and practice of the Church of the Province of South Africa in Ovamboland, 1924-1960
- Authors: Mallory, Charles Shannon
- Date: 1971
- Subjects: Church of the Province of Southern Africa -- Namibia -- Owambo
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:1232 , http://hdl.handle.net/10962/d1007312 , Church of the Province of Southern Africa -- Namibia -- Owambo
- Description: This thesis is a study that was originally inspired by the question, "What does it mean to be a Christian in rural Africa today?" While the Church needs to ask this question everywhere in the world, from experience the writer believes it is especially germane to the non-Western cultures of Africa and Asia. That experience is drawn from eight years' work among the Kwanyama tribe of Ovambos in the Ovamboland Anglican Mission. Hence, this study is confined to one rural African tribe as it came under 46 years' influence of one Christian denomination.
- Full Text:
- Date Issued: 1971
- Authors: Mallory, Charles Shannon
- Date: 1971
- Subjects: Church of the Province of Southern Africa -- Namibia -- Owambo
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:1232 , http://hdl.handle.net/10962/d1007312 , Church of the Province of Southern Africa -- Namibia -- Owambo
- Description: This thesis is a study that was originally inspired by the question, "What does it mean to be a Christian in rural Africa today?" While the Church needs to ask this question everywhere in the world, from experience the writer believes it is especially germane to the non-Western cultures of Africa and Asia. That experience is drawn from eight years' work among the Kwanyama tribe of Ovambos in the Ovamboland Anglican Mission. Hence, this study is confined to one rural African tribe as it came under 46 years' influence of one Christian denomination.
- Full Text:
- Date Issued: 1971
- «
- ‹
- 1
- ›
- »