Data on microhardness and structural analysis of friction stir spot welded lap joints of AA5083-H116
- Esther T. Akinlabi, Ayuba S. Osinubi b, Nkosinathi Madushele b, Stephen A. Akinlabi c, Omolayo M. Ikumapayi d,∗
- Authors: Esther T. Akinlabi , Ayuba S. Osinubi b , Nkosinathi Madushele b , Stephen A. Akinlabi c , Omolayo M. Ikumapayi d,∗
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/11260/3260 , vital:43286 , https://www.sciencedirect.com/science/article/pii/S2352340920314669
- Description: Friction stir spot welding (FSSW) was established to compete reasonably with the reverting, bolting, adhesive bonding as well as resistance spot welding (RSW) which have been used in the past for lap joining in automobile, aerospace, marine, railways, defence and shipbuilding industries. The use of these ancient and conventional joining techniques had led to increasing material cost, installation labour, and additional weight in the aircraft, shipbuilding, and other areas of applications. All these are disadvantages that can be overcome using FSSW. This research work carried out friction stir spot welding on 5058-H116 aluminium alloy by employing rotational speed in the step of 300 rpm ranges from 600 rpm to 1200 rpm with a no travel speed. It was noted that the dwell times were in the step of 5 s varying from 5 s to 15 s while the tool plunge rate was maintained at 30 mm/min. In this dataset, a cylindrical tapered rotating H13 Hot-working steel tool was used with a probe length of 5 mm and probe diameter of 6 mm, it has a shoulder diameter of 18 mm. The tool penetration depth (plunge) was maintained at 0.2 mm and the tool tilt angle at 2°. Structural integrity was car-ried out using Rigaku ultima IV multifunctional X-ray diffractometer (XRD) with a scan voltage of 40 kV and scan current of 30 mA. This was used to determine crystallite sizes, peak intensity, d-spacing, full width at half maximum intensity (FWHM) of the diffraction peak. TH713 digital microhardness equipment with diamond indenter was used for microhardness data acquisition following ASTM E92–82 standard test. The average Vickers hardness data values at different zones of the spot-welds were captured and presented.
- Full Text:
- Date Issued: 2020
Data on microhardness and structural analysis of friction stir spot welded lap joints of AA5083-H116
- Authors: Esther T. Akinlabi , Ayuba S. Osinubi b , Nkosinathi Madushele b , Stephen A. Akinlabi c , Omolayo M. Ikumapayi d,∗
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/11260/3260 , vital:43286 , https://www.sciencedirect.com/science/article/pii/S2352340920314669
- Description: Friction stir spot welding (FSSW) was established to compete reasonably with the reverting, bolting, adhesive bonding as well as resistance spot welding (RSW) which have been used in the past for lap joining in automobile, aerospace, marine, railways, defence and shipbuilding industries. The use of these ancient and conventional joining techniques had led to increasing material cost, installation labour, and additional weight in the aircraft, shipbuilding, and other areas of applications. All these are disadvantages that can be overcome using FSSW. This research work carried out friction stir spot welding on 5058-H116 aluminium alloy by employing rotational speed in the step of 300 rpm ranges from 600 rpm to 1200 rpm with a no travel speed. It was noted that the dwell times were in the step of 5 s varying from 5 s to 15 s while the tool plunge rate was maintained at 30 mm/min. In this dataset, a cylindrical tapered rotating H13 Hot-working steel tool was used with a probe length of 5 mm and probe diameter of 6 mm, it has a shoulder diameter of 18 mm. The tool penetration depth (plunge) was maintained at 0.2 mm and the tool tilt angle at 2°. Structural integrity was car-ried out using Rigaku ultima IV multifunctional X-ray diffractometer (XRD) with a scan voltage of 40 kV and scan current of 30 mA. This was used to determine crystallite sizes, peak intensity, d-spacing, full width at half maximum intensity (FWHM) of the diffraction peak. TH713 digital microhardness equipment with diamond indenter was used for microhardness data acquisition following ASTM E92–82 standard test. The average Vickers hardness data values at different zones of the spot-welds were captured and presented.
- Full Text:
- Date Issued: 2020
Dataset and ANN model prediction of performance of graphene nanolubricant with R600a in domestic refrigerator system
- Taiwo, Babarinde, Stephen, Akinlabi, Daniel Makundwaneyi, Madyira, Ekundayo, Funmilayo M, Paul Adeola, Adedeji
- Authors: Taiwo, Babarinde , Stephen, Akinlabi , Daniel Makundwaneyi, Madyira , Ekundayo, Funmilayo M , Paul Adeola, Adedeji
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/11260/3139 , vital:43150 , (https://www.sciencedirect.com/science/article/pii/S2352340920309926)
- Description: This work evaluated the steady state performance of R600a in the base lubricant and graphene nanolubricant. The measuring instruments required and their uncertainties were provided, step by step method and procedures for preparation of graphene nanolubricant concentration and substituting it with the base lubricant in domestic refrigerator system are described. The system temperatures data was captured at the inlet and outlet of the system components. Also, the pressures data was recorded at the compressor inlet and outlet. The data was recorded for 3 h at 30 min interval at an ambient temperature of 27 °C. The experimental dataset, Artificial Neural Network (ANN) training and testing dataset are provided. The artificial intelligence approach of ANN model to predict the performance of graphene nanolubricant in domestic refrigerator is explained. Also, the ANN model prediction statistical performance metrics such as Root Mean Square Error (RMSE) and Mean Absolute Deviation (MAD), Mean Absolute Percentage Error (MAPE) and coefficient of determination (R2) are also provided. The data is useful to researchers in the field of refrigeration and energy efficiency materials, for replacing nanolubricant with the base lubricant in refrigerator systems. The data can be reuse for simulation and modelling vapour compression energy system.
- Full Text:
- Date Issued: 2020
- Authors: Taiwo, Babarinde , Stephen, Akinlabi , Daniel Makundwaneyi, Madyira , Ekundayo, Funmilayo M , Paul Adeola, Adedeji
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/11260/3139 , vital:43150 , (https://www.sciencedirect.com/science/article/pii/S2352340920309926)
- Description: This work evaluated the steady state performance of R600a in the base lubricant and graphene nanolubricant. The measuring instruments required and their uncertainties were provided, step by step method and procedures for preparation of graphene nanolubricant concentration and substituting it with the base lubricant in domestic refrigerator system are described. The system temperatures data was captured at the inlet and outlet of the system components. Also, the pressures data was recorded at the compressor inlet and outlet. The data was recorded for 3 h at 30 min interval at an ambient temperature of 27 °C. The experimental dataset, Artificial Neural Network (ANN) training and testing dataset are provided. The artificial intelligence approach of ANN model to predict the performance of graphene nanolubricant in domestic refrigerator is explained. Also, the ANN model prediction statistical performance metrics such as Root Mean Square Error (RMSE) and Mean Absolute Deviation (MAD), Mean Absolute Percentage Error (MAPE) and coefficient of determination (R2) are also provided. The data is useful to researchers in the field of refrigeration and energy efficiency materials, for replacing nanolubricant with the base lubricant in refrigerator systems. The data can be reuse for simulation and modelling vapour compression energy system.
- Full Text:
- Date Issued: 2020
Dataset of experimental and adaptive neuro-fuzzy inference system (ANFIS) model prediction of R600a/MWCNT nanolubricant in a vapour compression system
- Babarinde, T O, Akinlabi, S A, Madyira, D M, Ekundayo, F M, Adedeji, P A
- Authors: Babarinde, T O , Akinlabi, S A , Madyira, D M , Ekundayo, F M , Adedeji, P A
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/11260/3248 , vital:43283 , https://www.sciencedirect.com/science/article/pii/S2352340920312105
- Description: This research paper assessed the performance of R600a with the base lubricant and Multi-walled Carbon Nanotube (MWCNT) nanolubricant at steady state. It describes the instruments required for measurement of the data parameter and its uncertainties, steps involved in preparing and replacing the MWCNT nanolubricant concentration with base lubricant in vapour compression refrigeration. The system’s temperature data was collected at the components inlets and outlets. Pressure data was also registered at the compressor outlet and inlet. The data was captured at 27 °C ambient temperature at an interval of 30 min for 300 min. The experiment includes the experimental data collection, Adaptive Neuro-Fuzzy Inference System (ANFIS) training and testing dataset. The use of ANFIS model is explained in predicting the efficiency of MWCNT nanolubricant in a vapour compression refrigerator system. The ANFIS model also provides statistical output measures such as Root Mean Square Error (RMSE) and Mean Absolute Deviation (MAD), Mean Absolute Percentage Error (MAPE), and determination coefficient (R2). The data is useful and important for replacing MWCNT nanolubricant with base lubricant in a vapour compression refrigeration system for researchers in the specialisation of energy-efficient materials in refrigeration. The data present can be reused for vapour compression refrigeration systems simulation and modelling.
- Full Text:
- Date Issued: 2020
- Authors: Babarinde, T O , Akinlabi, S A , Madyira, D M , Ekundayo, F M , Adedeji, P A
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/11260/3248 , vital:43283 , https://www.sciencedirect.com/science/article/pii/S2352340920312105
- Description: This research paper assessed the performance of R600a with the base lubricant and Multi-walled Carbon Nanotube (MWCNT) nanolubricant at steady state. It describes the instruments required for measurement of the data parameter and its uncertainties, steps involved in preparing and replacing the MWCNT nanolubricant concentration with base lubricant in vapour compression refrigeration. The system’s temperature data was collected at the components inlets and outlets. Pressure data was also registered at the compressor outlet and inlet. The data was captured at 27 °C ambient temperature at an interval of 30 min for 300 min. The experiment includes the experimental data collection, Adaptive Neuro-Fuzzy Inference System (ANFIS) training and testing dataset. The use of ANFIS model is explained in predicting the efficiency of MWCNT nanolubricant in a vapour compression refrigerator system. The ANFIS model also provides statistical output measures such as Root Mean Square Error (RMSE) and Mean Absolute Deviation (MAD), Mean Absolute Percentage Error (MAPE), and determination coefficient (R2). The data is useful and important for replacing MWCNT nanolubricant with base lubricant in a vapour compression refrigeration system for researchers in the specialisation of energy-efficient materials in refrigeration. The data present can be reused for vapour compression refrigeration systems simulation and modelling.
- Full Text:
- Date Issued: 2020
- «
- ‹
- 1
- ›
- »