Preparation, characterization and optimization of carbamazepine based pellets prepared by extrusion-spheronization technique
- Authors: Makoni, Kudzai Gabriella
- Date: 2020-04
- Subjects: Carbamazepine , Pharmacokinetics , Anticonvulsants , Drugs -- Controlled release , Drugs -- Dosage forms , Tablets (Medicine) , Drugs -- Administration , High performance liquid chromatography , International Conference on Harmonisation , Experimental design
- Language: English
- Type: Thesis , Masters , MSc (Pharmacy)
- Identifier: http://hdl.handle.net/10962/140478 , vital:37893
- Description: Carbamazepine (CBZ) is an oral antiepileptic drug (AED) that is prescribed as a first-line treatment for partial seizures. CBZ is a class II compound according to the Biopharmaceutical Classification System (BCS), hence it exhibits low aqueous solubility and high gastrointestinal tract (GIT) permeability...
- Full Text:
- Date Issued: 2020-04
- Authors: Makoni, Kudzai Gabriella
- Date: 2020-04
- Subjects: Carbamazepine , Pharmacokinetics , Anticonvulsants , Drugs -- Controlled release , Drugs -- Dosage forms , Tablets (Medicine) , Drugs -- Administration , High performance liquid chromatography , International Conference on Harmonisation , Experimental design
- Language: English
- Type: Thesis , Masters , MSc (Pharmacy)
- Identifier: http://hdl.handle.net/10962/140478 , vital:37893
- Description: Carbamazepine (CBZ) is an oral antiepileptic drug (AED) that is prescribed as a first-line treatment for partial seizures. CBZ is a class II compound according to the Biopharmaceutical Classification System (BCS), hence it exhibits low aqueous solubility and high gastrointestinal tract (GIT) permeability...
- Full Text:
- Date Issued: 2020-04
African traditional medicine-antiretroviral interactions : effects of Sutherlandia frutescens on the pharmacokinetics of Atazanavir
- Authors: Müller, Adrienne Carmel
- Date: 2011 , 2011-03-28
- Subjects: Antiretroviral agents , Medicinal plants , Traditional medicine , AIDS (Disease) -- Treatment , HIV infections -- Drug therapy , Drug interactions , Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3859 , http://hdl.handle.net/10962/d1013373
- Description: In response to the urgent call for investigations into antiretroviral (ARV)-African traditional medicine (ATM) interactions, this research was undertaken to ascertain whether chronic administration of the ATM, Sutherlandia frutescens (SF) may alter the bioavailability of the protease inhibitor (PI), atazanavir (ATV), which may impact on the safety or efficacy of the ARV. Prior to investigating a potential interaction between ATV and SF in vitro and in vivo, a high performance liquid chromatography method with ultraviolet detection (HPLC-UV) was developed and validated for the bioanalysis of ATV in human plasma and liver microsomes. An improved and efficient analytical method with minimal use of solvents and short run time was achieved in comparison to methods published in the literature. In addition, the method was selective, linear, accurate and precise for quantitative analysis of ATV in these studies. Molecular docking studies were conducted to compare the binding modes and affinities of ATV and two major SF constituents, Sutherlandioside B and Sutherlandin C, with the efflux transporter, P-glycoprotein (P-gp) and the CYP450 isoenzyme, CYP3A4 to determine the potential for these phytochemicals to competitively inhibit the binding of ATV to these two proteins, which are mediators of absorption and metabolism. These studies revealed that modulation of P-gp transport of ATV by Sutherlandioside B and Sutherlandin C was not likely to occur via competitive inhibition. The results further indicated that weak competitive inhibition of CYP3A4 may possibly occur in the presence of either of these two SF constituents. The Caco-2 cell line was used as an in vitro model of human intestinal absorption. Accumulation studies in these cells were conducted to ascertain whether extracts and constituents of SF have the ability to alter the absorption of ATV. The results showed that the aqueous extract of SF significantly reduced ATV accumulation, suggesting decreased ATV absorption, whilst a triterpenoid glycoside fraction isolated from SF exhibited an opposing effect. Analogous responses were elicited by the aqueous extract and a triterpenoid glycoside fraction in similar accumulation studies in P-gp overexpressing Madin–Darby Canine Kidney Strain II cells (MDCKII-MDR1), which signified that the effects of this extract and component on ATV transport in the Caco-2 cells were P-gp-mediated. The quantitative analysis of ATV in human liver microsomes after co-incubation with extracts and components of SF was conducted to determine the effects of SF on the metabolism of ATV. The aqueous and methanolic extracts of SF inhibited ATV metabolism, whilst the triterpenoid glycoside fraction had a converse effect. Analogous effects by the extracts were demonstrated in experiments conducted in CYP3A4-transfected microsomes, suggesting that the inhibition of ATV metabolism in the liver microsomes by these SF extracts was CYP3A4-mediated. A combination of Sutherlandiosides C and D also inhibited CYP3A4-mediated ATV metabolism, which was in contrast to the response elicited by the triterpenoid fraction in the liver microsomes, where other unidentified compounds, shown to be present therein, may have contributed to the activation of ATV metabolism. The in vitro studies revealed the potential for SF to alter the bioavailability of ATV, therefore a clinical study in which the effect of a multiple dose regimen of SF on the pharmacokinetics (PK) of a single dose of ATV was conducted in healthy male volunteers. The statistical analysis showed that the 90 % confidence intervals around the geometric mean ratios (ATV + SF/ATV alone) for both Cmax and AUC0-24 hours, fell well below the lower limit of the "no-effect" boundary of 0.8 – 1.25, implying that the bioavailability of ATV was significantly reduced in this cohort of subjects. It may thus be concluded that if the reduction in bioavailability observed in this clinical study is found to be clinically relevant, co-administration of SF commercial dosage forms and ATV in HIV/AIDS patients may potentially result in subtherapeutic ATV levels, which may in turn contribute to ATV resistance and/or treatment failure. This research has therefore highlighted the potential risk for toxicity or lack of efficacy of ARV regimens which may result when ATMs and PIs are used concurrently and that patients and health care practitioners alike should be aware of these perils.
- Full Text:
- Date Issued: 2011
- Authors: Müller, Adrienne Carmel
- Date: 2011 , 2011-03-28
- Subjects: Antiretroviral agents , Medicinal plants , Traditional medicine , AIDS (Disease) -- Treatment , HIV infections -- Drug therapy , Drug interactions , Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3859 , http://hdl.handle.net/10962/d1013373
- Description: In response to the urgent call for investigations into antiretroviral (ARV)-African traditional medicine (ATM) interactions, this research was undertaken to ascertain whether chronic administration of the ATM, Sutherlandia frutescens (SF) may alter the bioavailability of the protease inhibitor (PI), atazanavir (ATV), which may impact on the safety or efficacy of the ARV. Prior to investigating a potential interaction between ATV and SF in vitro and in vivo, a high performance liquid chromatography method with ultraviolet detection (HPLC-UV) was developed and validated for the bioanalysis of ATV in human plasma and liver microsomes. An improved and efficient analytical method with minimal use of solvents and short run time was achieved in comparison to methods published in the literature. In addition, the method was selective, linear, accurate and precise for quantitative analysis of ATV in these studies. Molecular docking studies were conducted to compare the binding modes and affinities of ATV and two major SF constituents, Sutherlandioside B and Sutherlandin C, with the efflux transporter, P-glycoprotein (P-gp) and the CYP450 isoenzyme, CYP3A4 to determine the potential for these phytochemicals to competitively inhibit the binding of ATV to these two proteins, which are mediators of absorption and metabolism. These studies revealed that modulation of P-gp transport of ATV by Sutherlandioside B and Sutherlandin C was not likely to occur via competitive inhibition. The results further indicated that weak competitive inhibition of CYP3A4 may possibly occur in the presence of either of these two SF constituents. The Caco-2 cell line was used as an in vitro model of human intestinal absorption. Accumulation studies in these cells were conducted to ascertain whether extracts and constituents of SF have the ability to alter the absorption of ATV. The results showed that the aqueous extract of SF significantly reduced ATV accumulation, suggesting decreased ATV absorption, whilst a triterpenoid glycoside fraction isolated from SF exhibited an opposing effect. Analogous responses were elicited by the aqueous extract and a triterpenoid glycoside fraction in similar accumulation studies in P-gp overexpressing Madin–Darby Canine Kidney Strain II cells (MDCKII-MDR1), which signified that the effects of this extract and component on ATV transport in the Caco-2 cells were P-gp-mediated. The quantitative analysis of ATV in human liver microsomes after co-incubation with extracts and components of SF was conducted to determine the effects of SF on the metabolism of ATV. The aqueous and methanolic extracts of SF inhibited ATV metabolism, whilst the triterpenoid glycoside fraction had a converse effect. Analogous effects by the extracts were demonstrated in experiments conducted in CYP3A4-transfected microsomes, suggesting that the inhibition of ATV metabolism in the liver microsomes by these SF extracts was CYP3A4-mediated. A combination of Sutherlandiosides C and D also inhibited CYP3A4-mediated ATV metabolism, which was in contrast to the response elicited by the triterpenoid fraction in the liver microsomes, where other unidentified compounds, shown to be present therein, may have contributed to the activation of ATV metabolism. The in vitro studies revealed the potential for SF to alter the bioavailability of ATV, therefore a clinical study in which the effect of a multiple dose regimen of SF on the pharmacokinetics (PK) of a single dose of ATV was conducted in healthy male volunteers. The statistical analysis showed that the 90 % confidence intervals around the geometric mean ratios (ATV + SF/ATV alone) for both Cmax and AUC0-24 hours, fell well below the lower limit of the "no-effect" boundary of 0.8 – 1.25, implying that the bioavailability of ATV was significantly reduced in this cohort of subjects. It may thus be concluded that if the reduction in bioavailability observed in this clinical study is found to be clinically relevant, co-administration of SF commercial dosage forms and ATV in HIV/AIDS patients may potentially result in subtherapeutic ATV levels, which may in turn contribute to ATV resistance and/or treatment failure. This research has therefore highlighted the potential risk for toxicity or lack of efficacy of ARV regimens which may result when ATMs and PIs are used concurrently and that patients and health care practitioners alike should be aware of these perils.
- Full Text:
- Date Issued: 2011
Formulation and evaluation of captopril loaded polymethacrylate and hydroxypropyl methycellulose microcapsules
- Khamanga, Sandile Maswazi Malungelo
- Authors: Khamanga, Sandile Maswazi Malungelo
- Date: 2010
- Subjects: Hypertension -- Treatment , Hypertension -- Chemotherapy , Angiotensin converting enzyme -- Inhibitors , Hypotensive agents -- Development , Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3860 , http://hdl.handle.net/10962/d1013443
- Description: Angiotensin-converting enzyme (ACE) inhibitors are some of the most commonly prescribed medications for hypertension. They are cited in many papers as the treatment most often recommended by guidelines and favoured over other antihypertensive drugs as first-line agents especially when other high-risk conditions are present, such as diabetic nephropathy. The development of captopril (CPT) was amongst the earliest successes of the revolutionary concept of structure-based drug design. Due to its relatively poor pharmacokinetic profile or short half-life of about 1 hour, the formulation of sustained-release microcapsule dosage form is useful to improve patient compliance and to achieve predictable and optimized therapeutic plasma concentrations. Currently, CPT is mainly administered in tablet form. One of the difficulties of CPT formulation has been reported to be its instability in aqueous solutions. CPT is characterized by a lack of a strong chromophore and, therefore, not able to absorb at the more useful UV–Vis region of the spectrum. For this reason, an accurate, simple, reproducible, and sensitive HPLC-ECD method was developed and validated for the determination of CPT in dosage forms. The method was successfully applied for the determination of CPT in commercial and developed formulations. Possible drug-excipient and excipient-excipient interactions were investigated prior to formulating CPT microcapsules because successful formulation of a stable and effective solid dosage form depends on careful selection of excipients. Nuclear magnetic resonance spectroscopy, Fourier transform infra-red spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used for the identification and purity testing of CPT and excipients. The studies revealed no thermal changes during stress testing of binary and whole mixtures which indicate absence of solid state interactions. There were no shifts, appearance and disappearance in the endothermic or exothermic peaks and on the change of other associated enthalpy values on thermal curves obtained with DSC method. Characteristic peaks for common functional groups in the FT-IR were present in all the mixtures indicating the absence of incompatibility. The techniques used in this study can be said to have been efficient in the characterization and evaluation of the drug and excipients. The technique of microencapsulation by oil-in-oil was used to prepare CPT microcapsules. The effects of polymer molecular weight, homogenizing speed on the particle size, flow properties, morphology, surface properties and release characteristics of the prepared CPT microcapsules were examined. In order to decrease the complexity of the analysis and reduce cost response surface methodology using best polynomial equations was successfully used to quantify the effect of the formulation variables and develop an optimized formulation thereby minimizing the number of experimental trials. There was a burst effect during the first stage of dissolution. Scanning electron microscopy (SEM) results indicated that the initial burst effect observed in drug release could be attributed to dissolution of CPT crystals present at the surface or embedded in the superficial layer of the matrix. During the preparation of microcapsules, the drug might have been trapped near the surface of the microcapsules and or might have diffused quickly through the porous surface. The release kinetics of CPT from most formulations followed Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores at the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed predominance of diffusion relative to swelling or erosion throughout the entire test period. Drug release mechanism was also confirmed by Makoid-Banakar and Korsmeyer-Peppas models exponents which further support diffusion release mechanism in most formulations. The models postulate that the total of drug release is a summation of a couple of mechanisms; burst release, relaxation induced controlled-release and diffusional release. Inspection of the 2D contour and 3D response surfaces allowed the determination of the geometrical nature of the surfaces and further providing results about the interaction of the different variables used in central composite design (CCD). The wide variation indicated that the factor combinations resulted in different drug release rates. Lagrange, canonical and mathematical modelling were used to determine the nature of the stationery point of the models. This represented the optimal variables or stationery points where there is interaction in the experimental space. It is difficult to understand the shape of a fitted response by mere inspection of the algebraic polynomial when there are many independent variables in the model. Canonical and Lagrange analyses facilitated the interpretation of the surface plots after a mathematical transformation of the original variables into new variables. In conclusion, these results suggest the potential application of Eudragit® / Methocel® microcapsules as suitable sustained-release drug delivery system for CPT.
- Full Text:
- Date Issued: 2010
- Authors: Khamanga, Sandile Maswazi Malungelo
- Date: 2010
- Subjects: Hypertension -- Treatment , Hypertension -- Chemotherapy , Angiotensin converting enzyme -- Inhibitors , Hypotensive agents -- Development , Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3860 , http://hdl.handle.net/10962/d1013443
- Description: Angiotensin-converting enzyme (ACE) inhibitors are some of the most commonly prescribed medications for hypertension. They are cited in many papers as the treatment most often recommended by guidelines and favoured over other antihypertensive drugs as first-line agents especially when other high-risk conditions are present, such as diabetic nephropathy. The development of captopril (CPT) was amongst the earliest successes of the revolutionary concept of structure-based drug design. Due to its relatively poor pharmacokinetic profile or short half-life of about 1 hour, the formulation of sustained-release microcapsule dosage form is useful to improve patient compliance and to achieve predictable and optimized therapeutic plasma concentrations. Currently, CPT is mainly administered in tablet form. One of the difficulties of CPT formulation has been reported to be its instability in aqueous solutions. CPT is characterized by a lack of a strong chromophore and, therefore, not able to absorb at the more useful UV–Vis region of the spectrum. For this reason, an accurate, simple, reproducible, and sensitive HPLC-ECD method was developed and validated for the determination of CPT in dosage forms. The method was successfully applied for the determination of CPT in commercial and developed formulations. Possible drug-excipient and excipient-excipient interactions were investigated prior to formulating CPT microcapsules because successful formulation of a stable and effective solid dosage form depends on careful selection of excipients. Nuclear magnetic resonance spectroscopy, Fourier transform infra-red spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used for the identification and purity testing of CPT and excipients. The studies revealed no thermal changes during stress testing of binary and whole mixtures which indicate absence of solid state interactions. There were no shifts, appearance and disappearance in the endothermic or exothermic peaks and on the change of other associated enthalpy values on thermal curves obtained with DSC method. Characteristic peaks for common functional groups in the FT-IR were present in all the mixtures indicating the absence of incompatibility. The techniques used in this study can be said to have been efficient in the characterization and evaluation of the drug and excipients. The technique of microencapsulation by oil-in-oil was used to prepare CPT microcapsules. The effects of polymer molecular weight, homogenizing speed on the particle size, flow properties, morphology, surface properties and release characteristics of the prepared CPT microcapsules were examined. In order to decrease the complexity of the analysis and reduce cost response surface methodology using best polynomial equations was successfully used to quantify the effect of the formulation variables and develop an optimized formulation thereby minimizing the number of experimental trials. There was a burst effect during the first stage of dissolution. Scanning electron microscopy (SEM) results indicated that the initial burst effect observed in drug release could be attributed to dissolution of CPT crystals present at the surface or embedded in the superficial layer of the matrix. During the preparation of microcapsules, the drug might have been trapped near the surface of the microcapsules and or might have diffused quickly through the porous surface. The release kinetics of CPT from most formulations followed Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores at the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed predominance of diffusion relative to swelling or erosion throughout the entire test period. Drug release mechanism was also confirmed by Makoid-Banakar and Korsmeyer-Peppas models exponents which further support diffusion release mechanism in most formulations. The models postulate that the total of drug release is a summation of a couple of mechanisms; burst release, relaxation induced controlled-release and diffusional release. Inspection of the 2D contour and 3D response surfaces allowed the determination of the geometrical nature of the surfaces and further providing results about the interaction of the different variables used in central composite design (CCD). The wide variation indicated that the factor combinations resulted in different drug release rates. Lagrange, canonical and mathematical modelling were used to determine the nature of the stationery point of the models. This represented the optimal variables or stationery points where there is interaction in the experimental space. It is difficult to understand the shape of a fitted response by mere inspection of the algebraic polynomial when there are many independent variables in the model. Canonical and Lagrange analyses facilitated the interpretation of the surface plots after a mathematical transformation of the original variables into new variables. In conclusion, these results suggest the potential application of Eudragit® / Methocel® microcapsules as suitable sustained-release drug delivery system for CPT.
- Full Text:
- Date Issued: 2010
Development and assessment of azithromycin paediatric suppository formulations
- Authors: Mollel, Happiness
- Date: 2006
- Subjects: Azithromycin , Pediatrics , Clinical pharmacology , Pharmacokinetics , Suppositories , Drugs -- Dosage forms
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3774 , http://hdl.handle.net/10962/d1003252 , Azithromycin , Pediatrics , Clinical pharmacology , Pharmacokinetics , Suppositories , Drugs -- Dosage forms
- Description: The use of the oral route of administration for the treatment of young children with antibiotics can at times be problematic since, factors such as nausea, vomiting, taste and/or smell, in addition to the challenges associated with the administration of suspensions, may contribute to poor patient compliance. In such cases, the use of the rectal route of administration may be appropriate. Therefore, suppositories containing 250 mg azithromycin (AZI) were manufactured and assessed for potential as an antibiotic suppository dosage form. Suppositories, containing AZI dihydrate were manufactured by the fusion method, using different grades of PEG, Witepsol® and Suppocire® bases. The rate and extent of AZI release was evaluated using USP apparatus I, and samples were analyzed using a validated HPLC method. Differences in the rate and extent of AZI release were observed with the greatest amount of AZI being released from PEG formulations. The rate and extent of AZI release from formulations manufactured using fatty bases were influenced by physicochemical properties, such as melting rate and hydroxyl value, of the bases. In addition drug partitioning appeared to favor the lipid phase and had a negative impact on AZI release characteristics. Two different formulation approaches were used in an attempt to increase the rate and extent of AZI release from fatty base formulations. The use of surfactants significantly increased AZI release from formulations manufactured with fatty bases with high hydroxyl values. The use of urea or Povidone K25 in combination with AZI as a physical mixture or solid dispersion did not increase the rate and extent of AZI release from the fatty suppositories, to any significant extent. The mechanism of drug release was evaluated using several mathematical models, including the Higuchi, Korsmeyer- eppas, Zero and, First order models. In addition, in vitro dissolution profiles were characterized by the difference and similarity factors, f1 and f2 and by use of the Gohel similarity factor, Sd. AZI release kinetics were best described by the Higuchi and Korsmeyer-Peppas models and the values of the release exponent, n, revealed that drug release was a consequence of the combined effects of AZI diffusion, rate of melting of the base and partitioning of the drug which can be considered to be anomalous release.
- Full Text:
- Date Issued: 2006
- Authors: Mollel, Happiness
- Date: 2006
- Subjects: Azithromycin , Pediatrics , Clinical pharmacology , Pharmacokinetics , Suppositories , Drugs -- Dosage forms
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3774 , http://hdl.handle.net/10962/d1003252 , Azithromycin , Pediatrics , Clinical pharmacology , Pharmacokinetics , Suppositories , Drugs -- Dosage forms
- Description: The use of the oral route of administration for the treatment of young children with antibiotics can at times be problematic since, factors such as nausea, vomiting, taste and/or smell, in addition to the challenges associated with the administration of suspensions, may contribute to poor patient compliance. In such cases, the use of the rectal route of administration may be appropriate. Therefore, suppositories containing 250 mg azithromycin (AZI) were manufactured and assessed for potential as an antibiotic suppository dosage form. Suppositories, containing AZI dihydrate were manufactured by the fusion method, using different grades of PEG, Witepsol® and Suppocire® bases. The rate and extent of AZI release was evaluated using USP apparatus I, and samples were analyzed using a validated HPLC method. Differences in the rate and extent of AZI release were observed with the greatest amount of AZI being released from PEG formulations. The rate and extent of AZI release from formulations manufactured using fatty bases were influenced by physicochemical properties, such as melting rate and hydroxyl value, of the bases. In addition drug partitioning appeared to favor the lipid phase and had a negative impact on AZI release characteristics. Two different formulation approaches were used in an attempt to increase the rate and extent of AZI release from fatty base formulations. The use of surfactants significantly increased AZI release from formulations manufactured with fatty bases with high hydroxyl values. The use of urea or Povidone K25 in combination with AZI as a physical mixture or solid dispersion did not increase the rate and extent of AZI release from the fatty suppositories, to any significant extent. The mechanism of drug release was evaluated using several mathematical models, including the Higuchi, Korsmeyer- eppas, Zero and, First order models. In addition, in vitro dissolution profiles were characterized by the difference and similarity factors, f1 and f2 and by use of the Gohel similarity factor, Sd. AZI release kinetics were best described by the Higuchi and Korsmeyer-Peppas models and the values of the release exponent, n, revealed that drug release was a consequence of the combined effects of AZI diffusion, rate of melting of the base and partitioning of the drug which can be considered to be anomalous release.
- Full Text:
- Date Issued: 2006
- «
- ‹
- 1
- ›
- »