List of Titles

The use of psychometric test systems as a pre-selection tool for identifying successful harvesting machine operators

Authors: Schwegman, Kylle
Date: 2022-04
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Doctoral theses , text
Identifier: http://hdl.handle.net/10948/55246 , vital:51102
Description: A shift towards fully mechanized forest activities, such as harvesting and, more recently, silviculture, has occurred from the early 2 000’s. The reason for mechanizing these activities differs for each country, although for most countries there is concern relating to the health and safety of forest workers. With mechanization in harvesting, the forest worker has moved away from the physical intensity of having to fell, debranch, debark and cross-cut trees into logs using either an axe or chainsaw, to operating a machine. Studies revolving around the human element (operator) have been conducted specifically relating to the ergonomics of the machines and how operators may influence machine productivity. Results showed that due to the repetitive nature of the work, the operators are exposed to associated stresses for longer periods. Typical injuries associated to these kinds of stressors are whole body vibrations (WBVs), repetitive hand and arm movements, non-neutral body postures and manual lifting, which lead to musculoskeletal symptoms in the lower back, neck and shoulders. However, as machine technology improves so does the ergonomic conditions which are experienced by machine operators. Machine productivity can be influenced by various factors, with the most influential being tree volume. However, a recent study showed that over 40% of variation in machine productivity has been observed amongst different machine operators operating similar machines. The specific reason for these differences has yet to be determined. However, decision making, motivation, planning capacity, concentration, memory, motor coordination, pattern recognition, logic reasoning, and spatial perception are abilities that have been described as important for successful harvesting work. The pre-selection of operators using psychometric and cognitive tests is not new to forestry, although very little information is available relating to the aptitude test known as the Vienna test system as well as the best possible demographic associated with successful harvesting operators. The overall aim of this study was to determine whether the high variation found amongst harvesting machine operators could be reduced initially through a preselection process which involves the use of aptitude tests (Vienna Test System) and demographic questionnaires. A study was implemented in Zululand, South Africa, testing whether there were significant productivity differences between nine machine operators. , Thesis (PhD) -- Faculty of Science, School of Natural Resource Management, 2022
Full Text:
Date Issued: 2022-04

Using information visualization to support the self-management of type 2 diabetes mellitus

Authors: Nauder, Meggan Kate
Date: 2022-04
Subjects: Information visualization , Diabetics --Treatment --South Africa
Language: English
Type: Master's theses , text
Identifier: http://hdl.handle.net/10948/55711 , vital:53409
Description: The globally increasing number of individuals suffering from Type 2 Diabetes Mellitus (T2DM), a completely preventable incurable disease of the pancreas, highlights the need for an effective tool for users to understand the relationship between their behaviours and the effect that those behaviours can have on their blood glucose levels (BGLs). There are few Information Visualisation (IV) tools available that can be used to reduce the cognition required to understand correlations between behaviour and BGLs. Existing tools require time-consuming, lengthy inputs and provide simple visualisations that do not show correlations. This leads to ineffective self-management of T2DM. Information Visualisation (IV) techniques can be used to support effective self-management of T2DM and reduce the cognition required to interpret DM data. Suitable IV techniques were identified and used to visualize T2DM data to aid in the self-management of the disease. Temporal charts, i.e. The Bar, Pie and Line Chart as well as heat maps, were selected as the most appropriate IV techniques to visualize T2DM data as they support time-series data well. A prototype, MedicMetric was created as an IV tool for visualizing T2DM data. MedicMetric incorporated three designed charts, namely the Change Rate Line View, the Radial Progress View, and the Annotated Line View. The Change Rate Line View and Annotated Line View both used line IV techniques, while the Radial Progress View made use of the bar IV technique. The Change Rate Line View performed the worst overall. A usability evaluation was conducted to compare these techniques and to determine which technique is most suitable for visualizing T2DM data. The results leaned significantly in favour of the Annotated Line View. This view is most similar to the line charts typically used in other IV tools. For this reason, the MedicMetric app was briefly compared to the MySygr and Diabetes:M application. In effectiveness and efficiency, MedicMetric and MySugr obtained almost identical results. However, participants indicated that MedicMetric supported their tasks using the Visual Information Seeking Mantra (VISM) the best overall, with 100% of participants stating that they would prefer to use the MedicMetric application. Several usability problems were identified with the IV techniques and they were addressed shortly after the study was complete. Overall participants were most satisfied with the Annotated Line View. , Thesis (MSc) -- Faculty of Science, Computing Sciences, 2022
Full Text:
Date Issued: 2022-04

Zooplankton dynamics of Algoa Bay (South Africa) under varying oceanographic conditions

Authors: Bizani,Mfundo
Date: 2022-04
Subjects: Marine zooplankton -- South Africa , Climate changes
Language: English
Type: Doctoral theses , text
Identifier: http://hdl.handle.net/10948/55943 , vital:54554
Description: the ecological significance of ocean plankton in terms of nutrient cycling and energy transfer is widely recognised, as is their mechanistic link with both oceanographic processes and climate. Consequently, plankton are widely regarded as sentinels of climate change, principally owing to their responsiveness to changing environmental conditions. Developing an understanding of the ecological as well as socio-economic consequences associated with changes in marine plankton dynamics has emerged as a key issue worldwide. Though many exciting advances in this respect have been attained with the aid of long-term plankton time series (>50 y), global environmental datasets and innovative meta-analyses, building deep knowledge of regional bio-physical dynamics and responses to specific perturbed states remains an essential component of the collective effort. Algoa Bay, situated on the warmtemperate south-east coast of South Africa presents a unique opportunity to study key elements of plankton ecology relevant to climate change problems in the regional sense. The embayment is locally subjected to frequent wind-driven upwelling and regionally, to periodic mesoscale oceanographic forcing (e.g., large solitary meanders, Agulhas Current intrusions), all of which culminate in a complex physical and biogeochemical environment. Using zooplankton as the focal component and drawing from a multi-year monthly dataset incorporating a bay-scale sampling framework, the present study addressed three key hypotheses pertaining to 1) drivers of spatio-temporal variability, 2) biomass rate of change over temporal scales using time-series analyses, and 3) community responses to a bay-scale biological perturbation event. Zooplankton biomass exhibited prominent seasonal patterns with bimodal peaks corresponding with near-consistent year-to-year autumn and spring blooms. Overall, the spatial trend showed no heterogeneity, though statistical significance between-station variability was noted per season. An analytical framework involving generalised additive models revealed zooplankton spatial heterogeneity in Algoa Bay to be a function of seasonal variation in a suite of physicochemical variables, including the combined effects of temperature, salinity, dissolved oxygen, total nitrogen and silicate, but not ammonium, phosphate or chlorophyll-a (as proxy for phytoplankton). Fronts (including river plumes), warm water intrusion from the Agulhas Current, and wind-driven upwelling were postulated to be key driving forces. Structural breaks analysis performed on station-specific time series revealed significant incremental increases in zooplankton biomass over time, which in turn, corresponded with a gradual decrease in thermocline depth. The most pronounced increasing effect was associated with a period (2013– 14) of amplified land-derived nutrient input and increasing harmful algal bloom (HAB) activity. , Thesis (PhD) -- Faculty of Science, School of Environmental Sciences, 2022
Full Text:
Date Issued: 2022-04

A critical exploration of the attitudes towards and knowledge of natural resource management amongst first-year Natural Resource Management students

Authors: Jooste, Eileen
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Master's , text
Identifier: http://hdl.handle.net/10948/53666 , vital:45688
Description: Available literature suggests that there is a need to gain more understanding of what students’ environmental attitudes and knowledge are and how they are developed by education systems. Education, in general, plays an important role in students’ attitudes and their knowledge of the world around them. It can shape students’ awareness of their natural environment and contribute to their understanding of environmental issues. Education can also strengthen students’ critical thinking, build awareness, stimulate problem solving, and promote sustainable practices. It has the potential to empower students to address global challenges from their own diverse perspectives and prepare them to uphold the economy. Education can improve and maintain societal wellbeing and can help students to maintain the natural environment, along with achieving sustainable development. Environmental education, specifically, can play a big role in how students deal with the natural environment. The primary aim of this qualitative research study was to examine first-year students’ environmental attitudes and knowledge in the School of Natural Resource Management at the Nelson Mandela University George Campus, South Africa. First-year students’ environmental attitudes and knowledge were examined as they entered the university, and then again at the end of the first semester once they had completed a module in ecology. More specifically, at the outset of the research the objectives were (1) to establish an understanding of the baseline environmental attitudes and knowledge of first-year students who were undertaking three ecological modules being offered by the School of Natural Resource Management; (2) to assess the changes in the first-year students’ environmental attitudes and knowledge, using a post-intervention strategy; (3) to understand what type of teaching approaches were used by the lecturers teaching the ecological modules; and (4) to evaluate how the teaching approaches of the lecturers influenced the baseline environmental attitudes and knowledge of the student group. This research took place in the midst of the Corona Virus pandemic, which had significantly influenced the teaching and learning environment. Multiple education systems, including those of the Nelson Mandela University George Campus, had to rapidly transition to online teaching and learning. So, although unplanned for, this research could not ignore the rapid transition to online teaching and learning and the role it played in shaping the first-year School of Natural Resource Management students’ environmental attitudes and knowledge. It also impacted the teaching approaches of the environmental lecturers. An additional objective in response to the rapid transition to online teaching and learning was, therefore, added: (5) to understand the experiences of the first-year School of Natural Resource Management students and the three environmental lecturers who had to rapidly transition to online teaching and learning. Data was collected via questionnaires and semi-structured interviews with students and staff in the School of Natural Resource Management at Nelson Mandela University George Campus within three different natural resource management programs, namely Agriculture, Nature Conservation, and Forestry. Baseline questionnaires were conducted with 107 students for a baseline assessment as the students entered the university. An online post-intervention questionnaire was conducted with 33 of the initial group of students at the end of the semester for a post-intervention assessment. In-depth semi-structured interviews were conducted with three environmental lectures before they taught their three ecology modules in each of the programs. Additional online semi-structured interviews were also done with the same three environmental lectures after the rapid transition to online teaching and learning took place. The significant findings from this research were analyzed and discussed. This included the baseline environmental attitudes and knowledge of the student body upon arrival at the university and the changes in their environmental attitudes and knowledge after they were exposed to the ecology modules taught in each of the programs. The discussion also included the teaching approaches adopted by the environmental lecturers and the influence their teaching approaches had on the students’ environmental attitudes and knowledge. In addition, the results shed light on the experiences of students and lecturers during the rapid transition to online teaching and learning. The main conclusions reached were that the first-year School of Natural Resource Management students did not have a deep understanding of ecological concepts prior to arriving at university, but they did show a concern for the natural environment. Their lack of understanding was reduced as the students progressed with the ecology module. A greater understanding resulted in a change in students’ perspectives on the ecological module, their program, and the industry they were preparing to enter after being exposed to the ecology module. The environmental lecturers’ teaching approaches contributed to improving the students’ environmental attitudes and knowledge. When it came to the rapid transition to online teaching and learning, both the first-year School of Natural Resource Management students and environmental lecturers experienced benefits and challenges. , Thesis (MSc) -- Faculty of Science, School of Natural Resource Management, 2021
Full Text:
Date Issued: 2021-12

A data-driven decision-making model for the third-party logistics industry in Africa

Authors: Moyo, Faith
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Master's theses , text
Identifier: http://hdl.handle.net/10948/53875 , vital:46022
Description: Third-party logistics (3PL) providers have continued to be key players in the supply chain network and have witnessed a growth in the usage of information technology. This growth has enhanced the volume of structured and unstructured data that is collected at a high velocity, and is of rich variety, sometimes described as “Big Data”. Leaders in the 3PL industry are constantly seeking to effectively and efficiently mature their abilities to exploit this data to gain business value through data-driven decision-making (DDDM). DDDM helps the leaders to reduce the reliance they place on observations and intuition to make crucial business decisions in a volatile business environment. The aim of this research was to develop a prescriptive model for DDDM in 3PLs. The model consists of iterative elements that prescribe guidelines to decision-makers in the 3PL industry on how to adopt DDDM. A literature review of existing theoretical frameworks and models for DDDM was conducted to determine the extent to which they contribute towards DDDM for 3PLs. The Design-Science Research Methodology (DSRM) was followed to address the aim of the research and applied to pragmatically and iteratively develop and evaluate the artefact (the model for DDDM) in the real-world context of a 3PL. The literature findings revealed that the challenges with DDDM in organisations include three main categories of challenges related to data quality, data management, vision and capabilities. Once the challenges with DDDM were established, a prescriptive model was designed and developed for DDDM in 3PLs. Qualitative data was collected from semi-structured interviews to gain an understanding of the problems and possible solutions in the real-world context of 3PLs. An As-Is Analysis in the real-world case 3PL company confirmed the challenges identified in literature, and that data is still used in the 3PL company for descriptive and diagnostic analytics to aid with the decision-making processes. This highlights that there is still room for maturity into using data for predictive and prescriptive analytics that will, in turn, improve the decision-making process. An improved second version of the model was demonstrated to the participants (the targeted users), who had the opportunity to evaluate the model. The findings revealed that the model provided clear guidelines on how to make data-driven decisions and that the feedback loop and the data culture aspects highlighted in the design were some of the important features of the model. Some improvements were suggested by participants. A field study of three data analytics tools was conducted to identify the advantages and disadvantages of each as well as to highlight the status of DDDM at the real-world case 3PL. The limitations of the second version of the model, together with the recommendations from the participants were used to inform the improved and revised third version of the model. , Thesis (MSc) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2021
Full Text:
Date Issued: 2021-12

A spatial assessment of riparian vegetation density and implications for streambank erosion in relation to land tenure in the Mgwalana Catchment, Eastern Cape Province, South Africa

Authors: Maxama, Asakhile
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Master's theses , text
Identifier: http://hdl.handle.net/10948/53864 , vital:46026
Description: Riparian vegetation provides an array of various ecosystem functions and has significantly shaped the conditions of catchments. It has strong controls on fluvial geomorphology and erosion processes. The Mgwalana catchment has been intensively studied over the years and the current environmental condition of the study has been linked to land use history. The catchment has been subjected to land use/cover changes (LUCC) over the years. However, spatial variations in riparian vegetation, their implications for stream bank stability and the contribution of land tenure systems to stream channel degradation are poorly understood. The study sought to assess the implications of the spatial variations in riparian vegetation density for stream bank erosion in relation to land tenure on a catchment scale. Land tenure units comprising the catchment of study are traditional and betterment villages (communal lands), and former white commercial farms. A three-pronged approach using GIS and remote sensing, field investigations and laboratory procedures for soil analysis was employed in this study. Variations of riparian vegetation density in the catchment were mapped using ArcGIS for the two land tenure units to assess the spatial variations of riparian density along stream reaches and to determine the spatial relationship between land tenure units and riparian vegetation diminution. Other mapped shape files include sediment accumulation zones to analyse the spatial relationship between riparian vegetation density and sediment sinks. LUCC classification and analysis of the Normalized Difference Vegetation Index (NDVI) were carried out in IDRISI Selva, using Landsat 8 TM imagery of 2018 to represent the current spatial riparian vegetation variations in the catchment. Field investigations were conducted to determine the coupling among hillslope gully erosion, riparian vegetation density and sink areas; and to assess physical characteristics of soil. This would permit an assessment of the implications of riparian vegetation for stream bank erosion and sediment accumulation within the tenure units. Soil samples were taken from scantily and densely vegetated stream reaches, as well as measurements of channel widths and depths. Analyses of soil physical properties viz; grain size distribution, bulk density, soil texture and aggregate stability were done. Results demonstrated that a sparse riparian vegetation distribution was consistent with the communal villages, confined to the upper catchment area. Dense riparian vegetation distribution was consistent with former commercial farms in the lower catchment area. , Thesis (MSc) -- Faculty of Science, School of Environmental Sciences, 2021
Full Text:
Date Issued: 2021-12

A value alignment smart city stakeholder model

Authors: Van der Hoogen, Anthea Vivian
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Master's theses , text
Identifier: http://hdl.handle.net/10948/54129 , vital:46309
Description: The concept of a Smart City has evolved over the last three decades and has attracted the increasing interest of the scientific research community. Unfortunately, many Smart City projects and initiatives do not provide the value expected by all the stakeholders. Many of the reasons for this relate to a lack of data management, data integration, data access and stakeholder participation. People are an integral part of any city’s ecosystem, and the Smart City concept was introduced to address the challenges of an ever-growing global population leading to the risk of depletion of economic, environmental and social resources. The problem addressed in this study is based on the challenges preventing the creation of the value of smart cities or stakeholders. Limited research has been published on the status of Smart City initiatives or on the impact of various success factors on the potential value creation for stakeholders including citizens. Studies on initiatives in developing countries, such as South Africa are even less. Whilst some challenges and constraints related to smart cities in Africa have been reported, there are no studies reporting on initiatives across the data value chain that consider all types of stakeholders, nor the impact of these initiatives. This study addressed this gap in research and designed a theoretical Value Alignment Smart City Stakeholder (VASCS) Model based on a Systematic Literature Review and a review of related theories. The model has important components that should form part of any Smart City project or Smart City initiative. These five main components are: 1) nine Smart City dimensions with related success factors; 2) four stakeholder roles (enablers, providers, utilisers and users); 3) the data value chain; and 4) the five phases of stakeholder benefits/value realisation that can be linked to; 5) stakeholder value alignment. This study applied the VASCS Model to Smart City initiatives in two case studies in the Eastern Cape Province of South Africa, which were the Nelson Mandela Bay and Buffalo City to investigate and understand the status of such initiatives and the alignment of value thereof. The stakeholder interviews were conducted in two rounds with various stakeholders of Smart City initiatives, referred to as cases in the two case studies. An expert review of the VASCS Model was conducted with eight experts in the field of Information Systems and Smart Cities. The findings of this review served to confirm the components of the model, with only minor improvements recommended. It was confirmed that all of the components need to be considered in planning Smart City projects. The first round consisted of six interviews with enablers and providers and the second round consisted of 22 interviews with users, utilisers and citizens. The interviews investigated the value and impact experienced by stakeholders of these initiatives, with a particular focus on the users, utilisers and citizens of the cases. The interview data was transcribed and qualitatively analysed by using Atlas.tiand Excel. The data was analysed according to the Technological, Organisational and Environmental theory constructs and other identified themes. The interview analysis findings revealed several drivers for these initiatives, which were primarily cost reduction, integration and quality assurance. The results also highlighted access to resources, such as technical skills as a challenge. Another challenge identified was connectivity related to access to data and the digital and physical divide that can impact decision making. The main benefits of Smart City initiatives highlighted were the provision of infrastructure, education and training and digitalisation. The theoretical contribution of this study is the VASCS Model, which can assist other researchers and practitioners with knowledge of the factors, drivers, challenges and value obtained in Smart City initiatives. The model has two supplementary components: A Stakeholder Classification Model and a Smart City Success Factor Evaluation Template. The practical contribution of this study is the potential use of the VASCS Model by practitioners, city management, researchers and other stakeholders, who can use the model, with the related model and template for planning and evaluating Smart City initiatives. The model can be used to classify the digital activities according to a Smart City’s success factors while evaluating the value created by these activities. The impact of these initiatives can then be assessed through value realisation and alignment for stakeholders. The scientific contribution is the adoption of the model to the cases in the Eastern Cape. To reveal in depth, rich, interview findings that provide important lessons learnt relating to the value created for the stakeholders and the addition of these findings to the body of knowledge. , Thesis (PhD) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2021
Full Text:
Date Issued: 2021-12

Applying a systems analysis approach to support marine spatial planning in Algoa Bay, South Africa

Authors: Vermeulen, Estee Ann
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Doctoral theses , text
Identifier: http://hdl.handle.net/10948/54121 , vital:46312
Description: Ocean health provides the foundation for human health through the provisioning of ecosystem services. Increasing demands on ocean space and resources are, however, resulting in a decline in ocean health, with direct and indirect knock-on effects on marine uses and ultimately on human health. In response, there is a growing need to acknowledge and better manage complex human-ocean interactions. This has been recognised in global sustainable development goals and in integrated ocean management processes, leading to widespread endorsement of an ecosystem-based marine spatial planning (MSP) process, including in South Africa. In support of the national MSP process, significant progress has been made in understanding the spatial extent of marine activities and associated marine pressures, but the temporal dynamics of marine activities and interconnections with the marine environment are less well understood. To plan for the growth of marine activities and associated user conflicts, the drivers of these temporal dynamics and associated feedback effects need to be analysed and potential policy and management interventions identified and tested. To support South Africa’s national MSP process, this study adopts a systems analysis approach, using system dynamics modelling, to explore the temporal change in marine uses under alternative growth scenarios in Algoa Bay. Algoa Bay is an appropriate study area because it is experiencing a rapid expansion of marine activities, coupled with a growing uncertainty regarding marine sustainability outcomes. To assist future marine management decisions, the Algoa Marine Systems Analysis Tool (Algoa MSAT) was developed, comprising seven sub-models. Five of the sub-models represent selected marine uses in Algoa Bay, whereas the sixth and seventh integrate the outputs from each marine use in terms of sustainable management indicators (marine health, marine wealth and marine labour). Model development primarily adopted an expert-based model ling approach, although the involvement of stakeholders, through a collaborative modelling process, assisted in integrating knowledge on different marine sectors’ activities, impacts and planning visions into the model framework. Model results were generated under different scenarios to investigate changes in the growth of marine activities and marine sustainability indicators under different levels of ocean governance. Under the baseline (or business-as-usual) model scenario, marine activities were shown to grow increasingly within their respective management limits, with an increase in marine wealth and labour and a consequential decrease in marine health. This scenario particularly highlights that current ocean governance practices are ineffective in sustaining the projected growth of the marine uses, particularly for those that are vulnerable to negative changes in marine health. Conversely, sectors that hold more value in marine wealth and are more resilient to changes in marine health, may continue to grow regardless of negative knock-on effects of the health of the marine environment and on other uses in the bay. This emphasises that an alternative governance strategy is needed to achieve the long-term goal of an ecosystem-based MSP process, as required by South African MSP legislation. To achieve this will require multiple, adaptive cross-sectoral management interventions that are directed towards the ‘deeper leverage points’ that are able to maintain the growth of marine activities within appropriate limits defined by marine health. Using the model interface developed in this project, decision-makers and stakeholders can use the model to explore the temporal dynamics in marine activities under different governance scenarios. Although the model is limited to Algoa Bay, the model boundary can be adapted to assist in marine planning processes at national or trans-national scales. Such analytical assessments and tools are critical to progress the ecosystem-based management approach in MSP, as is required to achieve global sustainable development goals. , Thesis (PhD) -- Faculty of Science, Coastal and Marine Research Unit, 2021
Full Text:
Date Issued: 2021-12

Beneficiation of pyrolysis-derived waste tyre char by blending with torrefied wood and microalgae to produce solid fuel

Authors: Dube, Cleopatra Thulani
Date: 2021-12
Subjects: Pyrolysis , Solid fuel reactors
Language: English
Type: Master's theses , text
Identifier: http://hdl.handle.net/10948/58439 , vital:59241
Description: he thermal decomposition of waste tyres via pyrolysis is considered to be amongst the most promising methods of recycling tyres due to its minimal environmental impact (in terms of reduction in pollution). During pyrolysis, tyres are thermally degraded in an inert environment to produce gas, oil and char. The gas and oil have promising commercialization prospects while the char remains a pollutant despite the strides made in a lot of research to upgrade the char to carbon black, activated carbon and even for reuse as a filler in tyre manufacture. For pyrolysis to be profitable, or worthy of investments, all three of its products (oil, char and gas) need to be valorised. Pyrolysis-derived tyre chars (PT-char) have an energy value equivalent to high rank coals, however, the use of PT char as a solid fuel is uncommon due to the high contents of sulphur and mineral matter as well as low volatile matter content of the PT-char. As such, the combustion of PT-char is characterised by high ignition temperature, low thermal reactivity, and no flame formation due to the low amounts of volatile matter. On the other hand, biomass are clean, renewable feedstock, having low sulphur and mineral matter contents, as well as high thermal reactivity. The blending of PT-char with biomass could potentially improve the combustion properties of PT-char and minimise the release of toxic emissions from the char, and thus, could make PT-char suitable for use as a fuel source. In this study, PT-char was blended with torrefied wood and microalgae biomass to demonstrate the suitability of using PT-char-biomass-fuel blend as an energy feedstock. To this effect, a mixture design of experiments was used to formulate the PT-char biomass blends and regression analysis was employed to select an optimum blend formulation for the combustion and mechanical properties of the blends. Proximate analysis results showed a non-linear increase in the volatile matter and a non-linear decrease in the fixed carbon and ash yield as the biomass ratio increased. The calorific value also increased on an additive basis with increasing biomass proportion. The elemental analysis results showed a decrease in the calcium, zinc and bromine contents and an increase in the potassium and iron contents increased with increasing biomass proportion. Likewise, the sulphur content decreased while the oxygen, hydrogen and nitrogen contents increased with increasing biomass ratio. vi Thus, the fuel properties of the blends improved with increasing biomass ratio and without compromising the calorific value of the PT-char. Moreover, the TG-MS analysis showed that the PT-char and the respective blends did not show any release SO2 up to 650°C. Thus, making the fuel suitable for use in low temperature applications such as household and certain boilers. The results of the regression analysis showed that the blend formulation with the highest proportions of biomass, thus C55-T30-M15, is the optimum blend to produce a solid fuel with a low initial decomposition (214°C) and char ignition temperatures (532°C) as well as maximum burn-out temperature (640°C). In essence, the high thermal reactivity of PT-char is improved when both biomasses are loaded at maximum ratios as per the experimental design. The results of the MS showed a decrease in CO2 and NO2 emissions with increasing biomass proportion. The optimum blend (C55-T30-M15) was found to have a comparably higher gross calorific value (26 MJ/kg), lower sulphur content (1.1 wt.%), low ash yield (11wt.%) and lower concentration of minerals (i.e. zinc) than raw PT-char. In addition, the volatile matter content of the blend (20 wt.%) was found to be higher than that of PT-char and the ignition temperature of the optimum fuel blend was relatively lower and its burnout temperature higher than that of PT char. The MS results revealed that the CO2 and NO2 emissions were higher in the optimum blend than the PT-char. The mechanical properties of the pellets; impact resistance and compressive strength increased with increasing biomass blending ratio and even more so with increasing microalgae ratio. The C55-T30-M15 and C75-T10-M15 were selected as optimum blends using regression analysis and both blends exceeded the benchmark for mechanical properties except for water resistance. The blending did not improve the water resistance and all the blends did not meet the minimum threshold for water resistance. Overall, the blending of PT-char with torrefied wood and microalgae biomass has shown to improve the fuel properties PT-char, and therefore, making it a suitable potential fuel source. , Thesis (MSc) -- Faculty of Science, 2021
Full Text:
Date Issued: 2021-12

Coordination polymers for denitrogenation of fuel oils

Authors: Dembaremba, Tendai O
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Doctoral theses , text
Identifier: http://hdl.handle.net/10948/53630 , vital:45682
Description: In this thesis, we present adsorptive removal of nitrogen-containing compounds from fuel oil as an alternative to complement conventional hydrotreatment to obtain ultra-low sulfur and nitrogen levels. This is in cognizance of the challenges nitrogen-containing compounds pose to the hydrotreatment process, particularly their inhibition and/or poisoning of the catalysts used in the process, of which basic nitrogen-containing compounds are the major culprits. Selectivity is the biggest challenge for adsorptive removal of nitrogen-containing compounds. We explore reticular synthesis of metal organic frameworks and the use of coordinatively unsaturated metal sites in 1-dimensional coordination polymers to achieve good selectivity for nitrogen-containing compounds. In the first part of the thesis, reticular synthesis of metal organic frameworks to control the size of the cavity, and strategically use the linkers and metal centres was envisaged. In this work we explored variation of the metal centres in the secondary building units (SBUs of the MOFs as the first step to the testing and implementation of the design strategies. Carbazole, representing carbazoles which the major compounds that remain in hydrotreated fuel, was the target compound. Four MOFs of zinc (Zn-CDC-bpe), copper (Cu-CDC-bpe), nickel (Ni-CDC-bpe) and cobalt (Co-CDC-bpe) based on the formation of a dinuclear metal paddlewheel SBUs with the ligand 9H-Carbazole-3,6-dicarboxylic acid (H2CDC) and occupation of the axial positions of the paddlewheel by 1,2-Bis(4-pyridyl)ethane (bpe) to form porous networks were synthesized. A fifth MOF containing only CDC which forms a [Zn4O(O2C-R)5(O2HC-R)] SBU was also synthesized (Zn-CDC). The ligand H2CDC was inspired by the possibility of improving selectivity for carbazole via π–π interactions through the more preferred parallel-offset stacking as well as the possibility for further substitution of the carbazole N-H to add groups that improve selectivity. The sizes of the MOF cavities can then be controlled by choosing different lengths of ligands analogous to 1,2-Bis(4-pyridyl)ethane (bpe), e.g. 4,4’-bipyridine and pyrazine. All the MOFs showed good selectivity of carbazole. The Zn-CDC MOF also had good selectivity for the basic nitrogen-containing compounds tested: quinoline, isoquinoline, quinaldine and 1-naphthylamine. Its uptake of carbazole was also slightly higher. This was attributed to the presence of an unsaturated Zn site in the SBU. Adsorption in all the MOFs was primarily due to physisorption. It was concluded that the role of the metal centre does not play a significant role in the adsorption of carbazole besides providing a template for reticular synthesis. , Thesis (PhD) -- Faculty of Science, School of Biomolecular and Chemical Sciences, 2021
Full Text: false
Date Issued: 2021-12

Corrosion and hydrogen resistant modified zirlo surfaces for nuclear fuel cladding

Authors: Ngongo, Sinoyolo
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Doctoral theses , text
Identifier: http://hdl.handle.net/10948/54077 , vital:46252
Description: Zirconium (Zr) alloys are used as fuel cladding material in all modern water cooled commercial nuclear reactors. Zr alloys have many desirable properties for the nuclear reactor core environment, however, it also has a weakness in that overheated zirconium alloy fuel rods react with hot steam resulting in the release of hydrogen. High temperatures increase the oxidation rate and hence the hydrogen production rate which in turn increase the risk of a hydrogen gas explosion such as what is surmised to have happened in the 2011 Fukushima Daiichi nuclear plant incident. The some of the hydrogen produced will also diffuse into the zirconium alloy and form zirconium hydrides which will weaken the original zirconium alloy material. The development of accident tolerant fuel became a major focus area after the Fukushima event in March 2011 with the U.S. congress directing the U.S. Department of Energy to develop fuel with enhanced accident tolerance at high temperatures. The main objective in the case of zirconium alloy cladding has been the modification of cladding surface layers by coating or doping in order to reduce the oxidation rate and hydrogen generation rate by the reaction of steam with zirconium alloy cladding at high temperatures. This thesis focuses on two surface modifications to decrease the surface corrosion rate of ZIRLOTM (the Zr alloy used in this study) and reduce hydrogen uptake by ZIRLO. The first modification involves an oxidation-resistant nano-crystalline diamond (NCD) film deposited on ZIRLO. The NCD layer was deposited in a microwave plasma-enhanced linear antenna chemical vapor deposition (MW-LA-PECVD) system after immersion of the ZIRLO tubes in a water-based solution containing nanodiamonds. ZIRLO tube samples were coated with 200 nm and 500 nm thick NCD layers. The 200 nm thick NCD coated ZIRLO was kept as control sample whereas the 500 nm thick NCD coated ZIRLO was exposed to steam oxidation at 360 °C for 90 days. The results revealed that the NCD exfoliated in some areas leaving the ZIRLO exposed to the steam. In the areas where the diamond did not exfoliate, the diamond was still attached to the ZIRLO with an amorphous carbon layer present between the NCD and the zirconium oxide layer.The transmission electron microscopy (TEM) results of this study indicate the presence a sp3 – hybridised diamond phase for the NCD layer as well as an intermediate amorphous carbon layer between the NCD and ZrO2 layers. Analyses of the area where the NCD layer had exfoliated showed no evidence of an NCD layer. It is possible that the amorphous carbon layer between the diamond and the zirconium oxide is responsible for weak interfacial bonding leading to partial exfoliation during oxidation in steam 360 °C for 90 days. In the second modification, the effectiveness of a Cr doped ZrO2 layer to reduce the migration rate of hydrogen in ZrO2 was investigated. The ZIRLO tube used for this part of the study did not have a thin oxide passivation surface layer. Two different procedures were used to create chromium doped zirconium oxide surface layers on ZIRLO. The ZIRLO surface was coated with chromium using cathodic arc deposition followed compression plasma flow (CPF) treatment to facilitate intermixing of the Cr and the ZIRLO. In procedure 1, the surface modification was achieved through the incorporation of chromium into the zirconium surface layer using a compression plasma flow (CPF) technique, followed by the oxidation of the chromium doped zirconium. The oxidation process was conducted at 500 °C for 6 hours. In procedure 2, the chromium was incorporated into the zirconium oxide layer again using the CPF technique. Hydrogen desorption was measured from pure ZIRLO and CPF modified samples using a special gas reaction controller system. The key finding of the results is that the chromium doped (incorporated) zirconium oxide layer on ZIRLO sample exhibited the lowest hydrogen desorption rate of all the samples analysed. This indicates that H in the Cr doped zirconium oxide layer had the lowest mobility of all the samples investigated. This is consistent with the theoretical predictions that the doping of ZrO2 by Cr reduces the solubility of hydrogen in ZrO2. , Thesis (PhD) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2021
Full Text: false
Date Issued: 2021-12

Effect of coal and microalgae biomass co-firing on CO2, SO2 and NOx emissions: An experimental evaluation

Authors: Magida, Nokuthula Ethel
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Master's theses , text
Identifier: http://hdl.handle.net/10948/53817 , vital:45984
Description: There is increasingly stringent legislation on the environmental impact of energy production from coal combustion, and this has led to growing pressure to reduce the emission of greenhouse gases (GHGs). Thus, there is a significant need to develop and implement clean coal combustion technologies that would reduce the environmental gas pollutants. For power generation, the co-firing of biomass fuels at conventional coal-fired power stations is recognised as one of the low-cost, low-risk options to achieve significant reductions in GHG emissions. When coal is co-utilized with biomass there is added attractiveness because the biomass is CO2 neutral, and there is interest in using waste biomass and microalgae. Thus, the co-combustion of coal and biomass for energy production results in pollutant reduction, especially in the emissions of NOx, SOx, volatile organic compounds and polyaromatic hydrocarbons. The synergistic activity observed for toxic organic emissions is not well understood and is thought to involve chemical interaction between the volatiles from each fuel coupled with possible catalytic activity from the inorganic constituents of the fuels. The characterization of co-firing products and gases emitted from coal and microalgae (particularly the Scenedesmus strain) co-combustion has received limited attention. Therefore, this study seeks to understand possible interactions occurring during co-combustion of coal and Scenedesmus microalgae (Coalgae®). Additionally, the study aims to determine the effect of co-firing coal and Scenedesmus microalgae on CO2, SO2 and NOx emissions. The term “Coalgae®” refers to the mixture of coal and microalgae biomass. The study looks at physico-thermal characteristics as well as CO2, SO2 and NOx emissions of various coal-microalgae blending ratios by mass; 100:0 (coal), 95:5 (Coalgae® 5%), 90:10 (Coalgae® 10%), 85:15 (Coalgae® 15%) and 80:20 (Coalgae® 20%). Characterization techniques carried out included proximate and ultimate analyses, Fourier-transform infrared (FT-IR) and Scanning electron microscopy and X-ray energy dispersive spectroscopy (SEM/EDS). For combustion studies two techniques were applied. Low heating rate was obtained through a Thermogravimetric-Mass spectrometer analysis (TG-MS). Other combustion experiments were performed on the five lumpy fuels (coal and Coalgae® 5% - 20%) exposed to the flame in a fixed-bed combustion reactor. The emission concentrations of CO2 (%), NOx (ppm) and SO2 (ppm) of coal and Coalgae® blends were measured during the combustion of the five materials using a Lancom 4 portable flue gas analyser. The mass reduction (g) and temperature (°C) at the reactor exit were recorded during the combustion tests to compare the combustion behaviour of the four mixtures to that of raw coal. TG-DTG curves of coal and microalgae confirmed that the combustion behaviour of these materials was different. Coal showed one reaction during the combustion process, while microalgae and the Coalgae® blends showed three reactions. A significant reduction in activation energies of 160.4 kJ/mol, 159.6 kJ/mol, 151.3 kJ/mol, and 134.2 kJ/mol for Coalgae® 5% - Coalgae® 20%, respectively, compared to coal (161.3 kJ/mol) was achieved. The lowering of activation energy could be attributed to the relative fixed carbon content. SEM morphology images of ash obtained from the combustion of coal and Coalgae® 5% - 20% confirmed changes in devolatilization and combustion behaviour of solid raw fuel. The ash of Coalgae® blends had higher fluxing elements (Fe, Ca, K and Mg) than coal and this shows possibility of slagging and fouling in combustion systems. The Coalgae® blends showed a synergistic effect due to different combustion characteristics of coal and Scenedesmus microalgae. The combustion results obtained from the fixed-bed reactor showed significant reductions in concentrations of CO2, SO2 and NOx emissions for Coalgae® blends compared to baseline coal. Microalgae reduced CO2 emissions from baseline coal by 14.9%, 19.5%, 23.5% and 31.4% for Coalgae® 5%, 10%, 15% and 20%, respectively. SO2 reductions of 1.9%, 10.6%, 15.8% and 18.2%, and NOx reductions of 22.4%, 26.1%, 24.4% and 16.9% were achieved with Coalgae® 5%, 10%, 15% and 20%, respectively. Moreover, the combustion efficiency of Coalgae® blends increased significantly by up to 14.5% from baseline coal (86.4%) to Coalgae® 20% (98.9%). Based on the above findings, the co-firing of coal and Scenedesmus microalgae biomass was necessary for the reduction of CO2, SO2, and NOx emissions. As such, Coalgae® blends can be considered as alternative fuels in any coal driven process for energy generation. , Thesis (MSc) -- Faculty of Science, School of Biomolecular and Chemical Sciences, 2021
Full Text:
Date Issued: 2021-12

Engineering nanocatalysts using mixed metals for hydrodesulfurization of fuel oil

Authors: Majodina, Siphumelele
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Master's theses , text
Identifier: http://hdl.handle.net/10948/53861 , vital:46021
Description: Crude oil is a complex blend containing thousands of hydrocarbons, non-hydrocarbon compounds and heavy metals. These hydrocarbons are mixed with variable quantities of sulfur-, nitrogen-, and oxygen-containing compounds. The combustion of fuel containing organosulfur compounds results in the emission of sulfur oxides (SOx) into the atmosphere. These toxic gases escape into the atmosphere resulting in air pollution, which is a large contributor to global warming. Air pollution also causes pulmonary diseases, allergies and may even lead to human death. It can also cause harm to other living organisms such as animals and food crops. Thus, mandating the reduction of sulfur in organosulfur compounds in fuel to <10 ppmS by the environmental protection agency. Several studies have been conducted to remove sulfur from fuels, most of which have focused on removing refractory sulfur compounds due to the difficulty in removing sulfur in these compounds. However, the currently employed hydrodesulfurization (HDS) catalysts suffer in producing fuels complying with the future standards of fuels quality. Generally, HDS catalysts are made up of metallic components, Co (Ni) and Mo (W), on porous supports, the catalytic activity of these catalysts strongly depends on the amount of NiWS (CoMoS) phases in it and to the extent in which these phases are exposed on the catalyst support surfaces and this is engineered using chelating agents and size of catalysts. To this end, nanosized materials (nanocatalysts) are considered most suitable, as reported active phases of HDS catalysts are exposed, hence improving the hydrodesulfurization of sulfur-containing compounds in fuels. Nanocatalysts results in nanoparticles and when impregnated on a support will results in high surface area, and enhances electronic property, which increases the activity of the catalyst allowing the most refractory sulfur to be removed. The addition of chelating agents such as EDTA, acetic acid, and citric acid further improves the activity of the catalysts by producing more active phases on the catalyst. In this research project, nanocatalysts will be synthesised using mixed metals with and without chelating agents and tested for HDS activity and selectivity towards sulfur using refractory organosulfur compounds in fuels under industrial HDS conditions. This work was divided into two sections, and this dissertation summarizes the research outcomes of each phase. The first section examines the effect of chelating ligands, namely, ethylenediaminetetraacetic acid (EDTA), citric acid (CA), and acetic acid (AA), on CoMo HDS activity and the sulfidation mechanism. In this study, chelating ligands seem to have a beneficial effect on HDS activity. Detailed mechanistic aspects of interactions between chelating ligands and metallic species (Co-chelating ligands) were also studied. Characterization by SC-XRD revealed that the presence of the chelating ligand result in the formation of complex with cobalt, and the effect of this complex was shown by TG-DSC analysis. This showed that the presence of chelating ligand leads a to delay of cobalt sulfidation as the complex decomposes at higher temperatures, which was the main cause of improving HDS activity. It was also shown that chelating ligands play a role in dispersion of metal oxides and sulfided metal oxides (TEM and XPS). XPS results showed low MoS2 phase for CoMo/Al2O3 (45%), while CoMo-EDTA/Al2O3 (63%) catalyst resulted in high MoS2 phases. From all the catalysts, CoMo-CA/Al2O3 (98%) gave the highest catalytic activity, and the increase in activity could be attributed to the formation of octahedral molybdenum oxides as they are easily reducible during sulfidation and result in more dispersed active phases and weak metal-support interaction. The second section examines the effect of a promoter (Rh) and different chelating ligands (EDTA, AA, and CA) on the catalyst RhMo supported with alumina. In this phase, rhodium was used as promoter, the following trend for catalytic activity was observed: RhMo/Al2O3 (88%) > RhMo-AA/Al2O3 (73%) > RhMo-CA/Al2O3 (72%) > RhMo-EDTA/Al2O3 (68%). This could be that the addition of chelating ligand complexed both metallic species retarding sulfidation of both metals, hence lowering the HDS activity. Studies show that it is possible for the citric acid to complex with both promoter and an active metal (Mo), and this might result in the formation of molybdenum dimers, trimers and tetramers which are difficult to sulfide. XPS analysis showed that unchelated catalyst have more MoS2 phases of 63%, hence higher dispersion than the chelated catalyst, this could be the reason for high activity in RhMo/Al2O3 (88%) catalyst. , Thesis (MSc) -- Faculty of Science, School of Biomolecular and Chemical Sciences, 2021
Full Text:
Date Issued: 2021-12

Factors influencing first-year students’ career decisions to pursue an IT career

Authors: Twani, Malibongwe
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Master's theses , text
Identifier: http://hdl.handle.net/10948/54135 , vital:46306
Description: The process of deciding on a career is a dauntingand life-changing decision,which all scholarshave had to make. Various factors influence a first-year student’s career choice decision and selected field of study. Career decision-making,as a field of study, has been extensivelyresearched,globally. The research studies focusingon IT career choicesof studentshave indicated that scholars choosing careers in Information Technology (IT) are influenced by factors such as salaries, knowledge of career opportunities, the reputation of IT-related fields in society and by parents, teachers and role models. Recent research indicates that exposure to new technologies and programming concepts at the school level can influence a scholar’s IT career choice. Theories relating to career choice have focused on the characteristics of individuals and their environment. Career choice models have identified factors that influenced a student’s career choice.In South Africahowever,there have been limited studies investigating the factors influencing students’ career decisions in choosing careers in Computer Science (CS), Information Systems (IS) and Information Technology (IT)using mixed-methods.This study aims to investigate the factors that influence first-year students’ decisionsin choosing an IT career at the Nelson Mandela University.The research study pursueda pragmatisticapproach,using a mixed-methods approach. In investigating theories andfactors that influence students’ decisionsin choosing IT careers,the study used systematic literature reviews. The decision-making theories and factorsin theliterature review facilitated the creation of the conceptual framework for IT career decision making. A questionnaire was developed and distributed amongst ITand Non-ITfirst-year studentsin 2021. Fourhundredand eightparticipants completed the survey. The data obtained from the survey were statistically analysed, includingdescriptive analysis andExploratory Factor Analysis(EFA). Additionally, inferential statistics were used namely; Correlations, t-test, Confirmatory Factor Analysis(CFA)and Structural Equation Modelling(SEM). The study results wereinterpreted andcompared with iiiotherrelevantstudies. Recommendations were madeto address the factorsthat influencefirst-year students’ IT career decisions.The study highlighted that high academic confidence and personal attributes amongststudents,whowereinvolved at an early age in programming and using computers,chose IT as a career. The study showed significant statistical differences betweenIT and Non-IT groups in perceptions about the IT industry and identifying job title descriptions.Additionally, a significant statistical difference between languages and genders was identified in understanding careers. , Thesis (MSc) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2021
Full Text:
Date Issued: 2021-12

In-vitroevaluation of bridelia ferruginea extract gold nanoparticles for the treatment of colon cancer

Authors: Zosela, Itumeleng , Davids, Hajierah
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Master's theses , text
Identifier: http://hdl.handle.net/10948/54124 , vital:46311
Description: Colorectal cancer (CRC) has become a health burden, being the third common cancer worldwide. Treatment of colorectal cancer is very important to manage the high prevalence rate of this disease. The available treatments for CRC have their drawbacks and side effects. Available treatments of colon cancer include surgery, chemotherapy, and radiation. Due to the side effects associated with these treatments, alternative treatments that pose less side effects are being developed worldwide. Nanotechnologies have gained global consideration due to their potential to improve the current standards and techniques for the diagnosis and treatment. The use of plants for synthesis of gold nanoparticles has opened a new venture of synthesizing environmentally friendly and cost-effective nanoparticles which possess great properties for CRC treatment. The aim of this study was to investigate the use of green synthesized AuNPs from Bridelia ferruginea for potential cancer treatment. In this work study gold nanoparticles were synthesized utilizing Bridelia ferruginea stem bark extract. The nanoparticles were characterized using UV–Vis spectroscopy, Dynamic Light Scattering (DLS), Fourier Transform Infrared Spectroscopy (FTIR) and High-Resolution Transmission Electron Microscopy (HRTEM). The in vitroanti cancer activity of the AuNPs was investigated using Presto Blue assay, cellular morphology, caspase 3/7 assay on the human colon cancer cell line at different times to assess the optimum time for cell death. The cellular uptake and localization of AuNPs was investigated using HRTEM to assess uptake and location of the AuNPs within the cell. Results obtained from this study showed that the AuNP synthesis from Bridellia ferrugenia was successful. The Presto Blue cell viability results showed that the AuNPs reduced cell viability (%) significantly (p<0.05) after 24 h. The optimum treatment time of HT-29 cells with AuNPs was determined to be 24 h. The apoptotic effects of the AuNPs were assessed using Cell Event reagent, and the results from this assay indicated that caspase 3/7 was activated with treatment with AuNPs which induced cell death via apoptosis. The HRTEM results indicated that there was no uptake of AuNP targeting in HT-29 therefore localization could not be determined. It can be concluded that the AuNPs synthesized from Bridellia ferrugenia have anti-cancer properties and are able to induce cell death through apoptosis. Furthermore, this study revealed that optimization of the AuNPs for cellular uptake is needed to further understand the interaction between the nanoparticles and the cells. This will provide more insight on how cellular death is induced by the nanoparticles. , Thesis (MSc) -- Faculty of Science, Department of Biochemistry and Microbiology (including Physiology), 2021
Full Text:
Date Issued: 2021-12

Mangrove response to water level changes at the Nxaxo-Ngqusi and St Lucia Estuaries

Authors: Julie, Corianna Lauren
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Master's theses , text
Identifier: http://hdl.handle.net/10948/53644 , vital:45689
Description: Water level variability within an estuary can vary as a function of tides (inundation frequency and duration) and rainfall, acting as one of the main determinants of mangrove growth, diversity, productivity, and distribution. Understanding how mangroves respond in estuaries to water level variability provides baseline information which can be used to predict future changes in mangrove growth and distribution in response to this driver This study measured mangrove characteristics (growth, structure, and areal extent) in two estuaries that differed in tidal setting, and thus water variability; the Nxaxo-Ngqusi and St Lucia estuaries, South Africa. These estuaries are part of a long-term monitoring programme (2010 - 2020) that has recorded mangrove responses to environmental changes. At the Nxaxo-Ngqusi Estuary, long-tem sea-level data (2003 – 2018) collected from the nearest tide gauge, and mangrove growth and areal extent were used to assess mangrove characteristics in a permanently open, micro tidal setting.Additionally, short-term water level data (August 2019 – September 2020), measured with in situ loggers, and sediment input at different sites within the mangrove forest, were also measured. Data was collected along the main channel sites, and at previously set up cattle exclusion plots ( browsed and non-browsed sites set to establish the effect of cattle browsing on mangroves). Similarly, at the St Lucia Estuary, long term water level data (2004 – 2020) collected at the bridge in the lower reaches of the estuary by Ezemvelo KZN-Wildlife, and annual mangrove growth, structure and areal extent data were used to assess mangrove characteristics in an estuarine lake that undergoes cycles between hypersaline and freshwater-dominated states. The results showed that mangrove responses to water level changes are complex and depend on several factors such as estuary mouth dynamics, anthropogenic activities, and site-level environmental conditions. The first objective was to compare water level changes and mangrove structure (mangrove height, and pneumatophore characteristics such as height, density and % aerenchyma) and sediment input between different sites at each estuary. Mangrove growth was higher at sites where longer inundation and higher inundation frequency were recorded at the Nxaxo-Ngqusi Estuary. However,longer inundation periods under closed mouth conditions resulted in stunted growth and mangrove dieback at St Lucia Estuary. At the Nxaxo-Ngqusi Estuary, mangroves at the main channel sites, closer to the water’s edge, had an overall higher growth rate (2.8 – 45.9 cm yr-1) than the mangroves found at the browsed (0 – 25 cm yr-1) and non-browsed sites (0 – 25.3 cm yr-1) on the landward edge of the forest. The effect of cattle browsing at these sites forms part of a long-term monitoring programme and this disturbance could have also influenced the results. Mangrove growth rate was higher in years with more rainfall at all sites within the estuary. At the St Lucia Estuary, mangrove growth rate was highest (0.81 cm yr-1) at a lower mean water level range (0.13 – 1.72 m) between 2010 - 2015, and growth rate was lowest (1.3 cm yr-1) in higher mean water level range conditions (0.34 m – 2.18 m) between 2015 – 2020. When water levels increased by up to 1.1 m due to closed mouth conditions, this led to extensive mangrove dieback further upstream by 2015. The maximum tidal flooding depth and inundation period influenced pneumatophore structure (height, density, and % aerenchyma) at the Nxaxo-Ngqusi Estuary. Sediment accumulation was highest at sites with increased pneumatophore density, but accumulation rates at the Nxaxo-Ngqusi Estuary (0.4 – 0.7 g over a high tide lasting 4-5 hours) were low and did not lead to smothering of the pneumatophores. Total sediment accumulation was highest at sites that experienced greater flooding depths. Increased inundation at the St Lucia Estuary caused inundation stress which led to mangrove mortality. This is because these mangroves are found in a closed estuary where increased water levels lead to prolonged submergence of the pneumatophores. A decrease in mangrove area was recorded at both sites. Low rainfall coupled with cattle browsing caused a decrease in mangrove area of 22% between 2009 and 2019, particularly along the mangrove fringe area at the Nxaxo-Ngqusi Estuary. The mangroves at the St Lucia Estuary, however, experienced mangrove dieback at all sites, with Site 1 recording the greatest percentage decrease in area of 71.7 % (loss of 44.76 ha) between 2010 and 2020. This was related to the progressive increase of freshwater input and water level at St Lucia Estuary under closed mouth conditions. The years leading up to 2019 had peaks in water levels at the St Lucia Estuary, with the highest water level of 2.12 m in 2019 since 2002. As a consequence, there was increased reed growth, where reeds expanded by 58% (177 ha) due to the high influx of freshwater, and no tidal exchange, which occurred in conjunction with a loss of 60.% (42 ha) of the original mangrove extent at the St Lucia Estuary. This study shows that increased water level changes (inundation frequency and duration) at the Nxaxo-Ngqusi Estuary maintain healthy mangrove stands. This is in contrast to the St Lucia Estuary, where there was a loss of mangroves as a result of high water levels under closed mouth conditions. Mangrove growth and extent at the Nxaxo-Ngqusi Estuary fluctuated in response to drought, and trampling and browsing by livestock. Extensive inundation and lack of tidal exchange reduced mangrove growth and extent at the St Lucia Estuary, with mangrove dieback occurring at all sites. These two systems are representative of the dynamic conditions found in South African estuaries. These research findings suggest that the continuous effects of climate change on estuarine habitats could result in changes in estuary mouth dynamics, which could impact mangrove growth, structure, and extent. , Thesis (MSc) -- Faculty of Science, School of Environmental Sciences, 2021
Full Text: false
Date Issued: 2021-12

Microstructural characterization of Swift Heavy Ion (SHI) induced rotation in single crystal NiO

Authors: Douglas-Henry, Danielle
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Doctoral theses , text
Identifier: http://hdl.handle.net/10948/53648 , vital:45685
Description: Swift Heavy Ions (SHI) are characterised by having energies greater than 1 MeV per nucleon with an atomic mass greater than 6 amu. Exposure to irradiation of this type has been known to produce latent tracks in insulators. This is due to the energy loss through the material being governed by electronic excitation processes. The extent of the track formation and microstructural changes induced has been reported to be material specific. Models such as the thermal spike model have been used to explain these changes, however rough approximations are still made. A particularly under studied phenomena is the collective rotation seen in materials exposed to off-normal incidence irradiation. To date the only available experimental data is X-Ray Diffraction (XRD) spectra and surface shifts. This does not allow for depth-dependent rotation studies and very little can be deduced regarding the microstructure of the modified volume. In this study, the microstructural changes in single crystal Nickel Oxide (NiO) have been studied using electron microscopy techniques. A depth dependent investigation of the crystal rotation was performed using Selected Area Electron Diffraction (SAED), Transmission Kikuchi Diffraction (TKD) and Electron Backscatter Diffraction (EBSD). Transmission Electron Microscopy (TEM) and Scanning Transmission Electron Microscopy (STEM) were utilized to interrogate the microstructural changes facilitating the bulk rotation. Five different NiO specimens were investigated. Specimens had surfaces parallel to either the {0 0 1} or {1 1 1} planes. Ion energies used were 593 MeV, 940 MeV and 1.6 GeV, while fluences ranged from 1.0 x 1011 ions/cm² to 9.6 x 1014 ions/cm². Latent track formation in both low fluence (nonoverlapping regime) and high fluence (overlapping regime) specimens were investigated and compared. , Thesis (PhD) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2021
Full Text: false
Date Issued: 2021-12

Modelling African swine fever disease in domestic pigs with culling and removal of contaminated feeds

Authors: Ndivhuwo, Netshamutshedzi
Date: 2021-12
Subjects: African swine fever virus , domestic pigs-- South Africa
Language: English
Type: Master's theses , text
Identifier: http://hdl.handle.net/10948/55822 , vital:53895
Description: In this study, a modelling African Swine Fever disease in domestic pigs with culling of infected pigs and removal of contaminated Feeds is studied. The goal of the study is to examine if culling of infected pigs and removal of contaminated food or water on pig farms can reduce the ASF trans mission in the domestic pig population. The SEAI-B model without control strategies is studied and analysed. It is shown that the solution for the system of model equations is both bounded and positive. We have found the disease free equilibrium point, basic reproductive number (using next generation method), local stability of disease free equilibrium (using Routh-Hurwitz criterion), global stability of disease free equilibrium, endemic equilibrium point (mathematica), existence of endemic equilibrium point, local stability of endemic equilibrium point (row echelon expression with the help of Maple 2.8) and global stability of endemic equilibrium point (Lyapunov function). Furthermore, sensitivity analysis is performed on the key parameters driving ASF Virus and to de termine their relative importance and potential impact on the dynamics of ASF Virus. Numerical result shows that if we increase the contact rate between susceptible pigs and infected pigs will re sults in increase ASF disease in the population. The SEAI-B model is reformulated incorporating culling of infected pigs and removal of contaminated food or water and analysed. Firstly, we found the disease free equilibrium point, basic reproductive number (using next generation method), local stability of disease free equilibrium point, global stability of disease free equilibrium point, endemic equilibrium point and local stability of endemic equilibrium point. Numerical result shows that if we increase culling of infected pigs and removal of contaminated food or water results in increase of susceptible pigs. The dynamic behavior of the model appears to be dependent on the culling of diseased pigs and the removal of contaminated food or water, according to numerical simulation. As a result, combining culling of infected pigs and removal of contaminated food or water as controls, it is possible to control the system in such a way that it approaches the desired state. , Thesis (MSc) -- Faculty of Sciences, School of Computer Science, Mathematics, Physics and Statistics, 2021
Full Text:
Date Issued: 2021-12

Ocean structures and dynamics of two open bays on the eastern Agulhas Bank

Authors: Dlomo, Xolisa
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Doctoral theses , text
Identifier: http://hdl.handle.net/10948/53607 , vital:45680
Description: Upwelling, bay-scale currents, fronts and mixing in Algoa Bay and St Francis Bay occur over both short and long time periods. These physical ocean dynamics drive the temporal and spatial distribution of nutrients in the bays, there by influencing primary and secondary production. Thermal gradients and fronts are driven by the wind and open ocean influences, such as the Agulhas Current, daily and seasonal variations in solar radiation, long and short period waves, air-sea fluxes, coastal trapped waves and terrestrial freshwater inflow. These phenomena are poorly understood along this part of the coastline and were the focus of this study. I investigated the dominant temperature scales of variability in both bays, to determine which isotherm is best suited to describe temperature fluctuations and thermocline spatiotemporal variability in and between the two bays. I investigated upwelling spatiotemporal variability in the two bays and tested whether upwelling occurs at the opposite sides of the bays with a change in wind direction. Thereafter studied the occurrence and drivers of winter upwelling events. The wind-driven current spatiotemporal variability and correlations were investigated at the extremities of the two bays. The daily, intra-seasonal and yearly variation in temperature structures in Algoa Bay and St. Francis Bay were mainly driven by the local winds, coastal topography, and bathymetry. The most suitable isotherm to describe thermal fluctuations and variability in Algoa Bay shallower sites was 16.5 °C and its mean depth was 16.2 m. The best isotherm for the deeper sites in Algoa Bay was 15.7 °C with a depth of 33.1 m. The average temperature and depth of the best isotherm to describe thermal fluctuations in St. Francis Bay for the shallower sites was15.80 °C and 16.83 m, and for the deeper sites it was 15.10 °C and 32.08 m. Algoa Bay showed an average cooling trend of -0.000172 °C per year, whereas in St. Francis Bay a warming average trend of 0.0188 °C per year was observed over the study period often and six years, respectively. The wind, Coriolis Effect and Ekman Transport were the main external forces that influenced upwelling throughout the year. Since the available mesoscale indices for upwelling intensity lack the resolution needed to characterize and compare inner-shelf upwelling regimes at small spatial scales, I developed a new local, quantitative index of thermal variability. Index calculations were based on hourly records of in site depth-averaged temperatures, measured at 6 sites in St. Francis Bay and at 8 sites in Algoa Bay. Using the Multivariate Upwelling Zone Index of Cooling (MUZIC) I found that Woody Cape and Blue Horizon Bay had the highest upwelling intensity in Algoa Bay and St. Francis Bay, respectively. The other sites were ordinated and ranked according to their upwelling rates and intensity. Evidence of wind-driven winter upwelling was found to be a common occurrence in both bays. There was no obvious current seasonality observed, however, strong spectral signals in the period of a weather band (4 –7 days) were present. Current structures were generally positively correlated with wind variations in both bays. Thus, when westerly/easterly winds blew the overall surface current direction was eastward/westward. I observed a pronounced current spatiotemporal variability that was driven by local winds. The Bird Island surface currents in Algoa Bay were strongly correlated at 0–lag day with the winds, however, in Cape Recife the strongest correlations were usually observed at 1–lag day highlighting the spatiotemporal influence of wind regimes on current structures in Algoa Bay. Bird Island current speeds were higher and had an obvious bimodal directional variation (south westward /north eastward) compared to Cape Recife currents, which generally had a slower current speed with a strong west-north westward direction. In St. Francis Bay, the Schoenmakerskop surface currents showed weak positive correlation with winds at 0–lag day, however, stronger negative correlations were observed at 4–lag days. The current surface speeds in Schoenmakerskop were the lowest and varied directionally between north-north eastward and south-south eastward. The basic data requirements (i.e. SST/ UTR and ADCP time series) and the simplicity of the calculations make these indices a useful tool to apply to a large number of sites nationally and internationally, and to examine the generality of community and population-level responses to physical forcing. , Thesis (PhD) -- Faculty of Science, Journalsim and Media Studies, 2021
Full Text:
Date Issued: 2021-12

Optimization of liposomes for enhanced stability against degradation by gastrointestinal fluid content

Authors: Scholtz, Carla Chleo
Date: 2021-12
Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
Language: English
Type: Master's theses , text
Identifier: http://hdl.handle.net/10948/54117 , vital:46305
Description: Motivation: Liposomes are nanoparticulate carriers consisting of a hydrophobic bilayer and a hydrophilic core. Their application as drug carrier systems arises from their unique physiochemical structure, biocompatibility and biodegradability. Their biphasic nature is significant in the delivery of peptide and protein drug molecules as it is thus able to encompass both hydrophobic and hydrophilic molecules. Liposomes are actively being used for drug delivery intravenously. These formulations have been successful in reducing side effects and improving therapeutic efficacy. However, the intravenous route poses many challenges and is not the preferred route of administration amongst patients. The oral route of administration is non-invasive, and administration is of ease, therefore it is the preferred route of administration amongst patients, especially those with complex medicine regimes. Problem: The gastrointestinal tract is a harsh environment. In order for liposomes to maintain their integrity during their course they require a level of stability against gastric and intestinal fluids and its associated constituents such as gastric and pancreatic enzymes, low pH and bile acid. Methodology: Based on recommendations extrapolated from literature, the incorporation of a bile salt, sodium glycocholate, into liposomes in conjunction with coating the surface with chitosan was selected as the optimization strategies to enhance the stability of liposomes against degradation in the gastrointestinal tract. Bilosomes with encapsulated calce in were produced using the thin-film hydration method and coated with chitosan. An in vitrocalce in release assay was conducted in simulated gastric and intestinal fluids which presented with in vivo conditions in terms of pH and enzymes and additional constituents such as a bile salt. Stability was determined by the extent of digestion within the simulated fluids with time. Results: Characterization results suggested that the addition of chitosan and sodium glycocholate to the liposomal formulation has significant effects on the physiochemical properties. The colloidal dispersions could not retain their stability during storage which was noticeable during HRTEM. Despite optimization of the liposomes, in vitro studies showed significant release in both simulated gastric and intestinal fluids, with majority release seen in the presence of pepsin and pancreatic, at low pH and in the presence of bile acid. , Thesis (MSc) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2021
Full Text:
Date Issued: 2021-12

Showing items 181 - 200 of 1294

The use of psychometric test systems as a pre-selection tool for identifying successful harvesting machine operators

Using information visualization to support the self-management of type 2 diabetes mellitus

Zooplankton dynamics of Algoa Bay (South Africa) under varying oceanographic conditions

A critical exploration of the attitudes towards and knowledge of natural resource management amongst first-year Natural Resource Management students

A data-driven decision-making model for the third-party logistics industry in Africa

A spatial assessment of riparian vegetation density and implications for streambank erosion in relation to land tenure in the Mgwalana Catchment, Eastern Cape Province, South Africa

A value alignment smart city stakeholder model

Applying a systems analysis approach to support marine spatial planning in Algoa Bay, South Africa

Beneficiation of pyrolysis-derived waste tyre char by blending with torrefied wood and microalgae to produce solid fuel

Coordination polymers for denitrogenation of fuel oils

Corrosion and hydrogen resistant modified zirlo surfaces for nuclear fuel cladding

Effect of coal and microalgae biomass co-firing on CO2, SO2 and NOx emissions: An experimental evaluation

Engineering nanocatalysts using mixed metals for hydrodesulfurization of fuel oil

Factors influencing first-year students’ career decisions to pursue an IT career

In-vitroevaluation of bridelia ferruginea extract gold nanoparticles for the treatment of colon cancer

Mangrove response to water level changes at the Nxaxo-Ngqusi and St Lucia Estuaries

Microstructural characterization of Swift Heavy Ion (SHI) induced rotation in single crystal NiO

Modelling African swine fever disease in domestic pigs with culling and removal of contaminated feeds

Ocean structures and dynamics of two open bays on the eastern Agulhas Bank

Optimization of liposomes for enhanced stability against degradation by gastrointestinal fluid content