Treatment of wine distillery wastewaters by high rate anaerobic digestion and submerged membrane systems
- Authors: Melamane, Xolisa Lorraine
- Date: 2007
- Subjects: Wine and wine making -- Waste disposal Sewage -- Purification -- Anaerobic treatment Membrane reactors Bioreactors
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3963 , http://hdl.handle.net/10962/d1004022
- Description: Experiences in treating wine distillery wastewaters (WDWs) contribute to the field of oenology as many oenologists are concerned with the selection, efficiency and economy of their wastewaters. Wine distillery wastewaters are strongly acidic, have high chemical oxygen demand (COD), high polyphenol content and are highly variable. Primary attention was focussed on sustainable biological treatment of raw wine distillery wastewater (RWDW) and fungally pre-treated wine distillery wastewater (FTWDW) by energy-efficient high rate anaerobic digestion (AD). This study also explored the development of a novel dual-stage anaerobic digestion ultrafiltration (ADUF) process, using a ceramic submerged membrane bioreactor (SMBR) in the treatment of both RWDW and FTWDW. The first stage was for the selection of microorganisms that were able to treat the toxic pollutants from WDWs. It was operated at a high feed-to-microorganism ratio. The second stage, a secondary digester, was operated like a typical membrane bioreactor at a low feed-to-microorganism ratio to sustain a stable efficient population for a long period. The characteristics of RWDW were as follows: pH 3.83, 15 000 mg/l soluble COD (CODs) and 5229 mg/l of phenols. After pre-treatment of RWDW with Trametes pubescens, starting parameters for FTWDW were as follows: pH 6.7, 7000 mg/l soluble COD (CODS) and 1440 mg/l of phenols. During operation of a high rate anaerobic digester for RWDW treatment, K2HPO4 was required for buffering the digester. Volatile fatty acid concentrations were <300 mg/l throughout the study, indicating degradation of organic acids present. Mean CODS removal efficiency for the 130 day study was 87 %, while the mean polyphenol removal efficiency was 85 %. Addition of 50 mg/l Fe3+ increased the removal efficiencies of CODS to 97 % and of polyphenols to 99 %. High removal efficiencies of CODS and polyphenols were attributed to the addition of macronutrients and micronutrients that caused pH stability and stimulated microbial activity. The CODS removal efficiency of high rate anaerobic digestion of FTWDW reached 99.5%. During FTWDW digestion, pH buffering was achieved using K2HPO4. A combination of a SMBR and a secondary digester was tested for the treatment of RWDW and FTWDW during a 30 day study. Results for RWDW showed that pH buffering was achieved by dosing the feed stream with CaCO3 and K2HPO4. Buffering proved to be significant for optimum performance of the system in removal of soluble CODS, and volatile fatty acids (VFAs). Different batches of RWDW used for feeding the reactor had variable compositions with respect to concentrations of nitrates, ammonium and total phenolic compounds. Ammonium accumulated in the secondary digester after 14 days of system operation, indicated the time required for the establishment of anaerobic conditions in the system. Dosing of the SMBR treating FTWDW with CaCO3 and K2HPO4 buffered the pH; iii this proved significant for optimum performance of the system in removal of CODS. The system eliminated an average of 86 (± 4) % of CODS present in the FTWDW. The residual CODS levels in the effluent were approximately 400 mg/l, significantly lower than the concentrations observed when treating RWDW, indicating that fungal pre-treatment might have provided additional nutrients for removal of recalcitrant components of the wastewater. The resulting effluent was rich in nitrates and phosphates and might be used as a fertiliser. Alternatively, a membrane process, such as reverse osmosis (RO) or nanofiltration (NF) could be applied to raise the water quality to meet the levels required for reuse. Biomass samples were obtained from the four treatment systems and population shifts characterization using phospholipids fatty acids (PLFA) and 16S rRNA analysis to provide an indication of limitations within the microbial population. The values of the concentrations of the individual PLFAs detected in the samples indicated that ten bacterial species were present, with the GC content of the 16S rRNA increasing from 1 to 10. Analysis of denaturing gradient gel electrophoresis DGGE data indicated that the composition of the archeal community changed the consortia used for both RWDW and FTWDW treatment. Changes in band intensities indicated the presence of different components of the archeal communities. The results were not conclusive in terms of species identity as cloning, sequencing and phylogenetic analyses were not performed, but they did indicate microbial population shifts and species diversity for high rate anaerobic digestion. The results also confirmed prevalence of relatively few species during operation of SMBRs for treatment of RWDW and FTWDW, which suggested that the microorganisms that survived were either tolerant of toxic components of RWDW and FTWDW or they were able to remove polyphenols.
- Full Text:
- Date Issued: 2007
- Authors: Melamane, Xolisa Lorraine
- Date: 2007
- Subjects: Wine and wine making -- Waste disposal Sewage -- Purification -- Anaerobic treatment Membrane reactors Bioreactors
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3963 , http://hdl.handle.net/10962/d1004022
- Description: Experiences in treating wine distillery wastewaters (WDWs) contribute to the field of oenology as many oenologists are concerned with the selection, efficiency and economy of their wastewaters. Wine distillery wastewaters are strongly acidic, have high chemical oxygen demand (COD), high polyphenol content and are highly variable. Primary attention was focussed on sustainable biological treatment of raw wine distillery wastewater (RWDW) and fungally pre-treated wine distillery wastewater (FTWDW) by energy-efficient high rate anaerobic digestion (AD). This study also explored the development of a novel dual-stage anaerobic digestion ultrafiltration (ADUF) process, using a ceramic submerged membrane bioreactor (SMBR) in the treatment of both RWDW and FTWDW. The first stage was for the selection of microorganisms that were able to treat the toxic pollutants from WDWs. It was operated at a high feed-to-microorganism ratio. The second stage, a secondary digester, was operated like a typical membrane bioreactor at a low feed-to-microorganism ratio to sustain a stable efficient population for a long period. The characteristics of RWDW were as follows: pH 3.83, 15 000 mg/l soluble COD (CODs) and 5229 mg/l of phenols. After pre-treatment of RWDW with Trametes pubescens, starting parameters for FTWDW were as follows: pH 6.7, 7000 mg/l soluble COD (CODS) and 1440 mg/l of phenols. During operation of a high rate anaerobic digester for RWDW treatment, K2HPO4 was required for buffering the digester. Volatile fatty acid concentrations were <300 mg/l throughout the study, indicating degradation of organic acids present. Mean CODS removal efficiency for the 130 day study was 87 %, while the mean polyphenol removal efficiency was 85 %. Addition of 50 mg/l Fe3+ increased the removal efficiencies of CODS to 97 % and of polyphenols to 99 %. High removal efficiencies of CODS and polyphenols were attributed to the addition of macronutrients and micronutrients that caused pH stability and stimulated microbial activity. The CODS removal efficiency of high rate anaerobic digestion of FTWDW reached 99.5%. During FTWDW digestion, pH buffering was achieved using K2HPO4. A combination of a SMBR and a secondary digester was tested for the treatment of RWDW and FTWDW during a 30 day study. Results for RWDW showed that pH buffering was achieved by dosing the feed stream with CaCO3 and K2HPO4. Buffering proved to be significant for optimum performance of the system in removal of soluble CODS, and volatile fatty acids (VFAs). Different batches of RWDW used for feeding the reactor had variable compositions with respect to concentrations of nitrates, ammonium and total phenolic compounds. Ammonium accumulated in the secondary digester after 14 days of system operation, indicated the time required for the establishment of anaerobic conditions in the system. Dosing of the SMBR treating FTWDW with CaCO3 and K2HPO4 buffered the pH; iii this proved significant for optimum performance of the system in removal of CODS. The system eliminated an average of 86 (± 4) % of CODS present in the FTWDW. The residual CODS levels in the effluent were approximately 400 mg/l, significantly lower than the concentrations observed when treating RWDW, indicating that fungal pre-treatment might have provided additional nutrients for removal of recalcitrant components of the wastewater. The resulting effluent was rich in nitrates and phosphates and might be used as a fertiliser. Alternatively, a membrane process, such as reverse osmosis (RO) or nanofiltration (NF) could be applied to raise the water quality to meet the levels required for reuse. Biomass samples were obtained from the four treatment systems and population shifts characterization using phospholipids fatty acids (PLFA) and 16S rRNA analysis to provide an indication of limitations within the microbial population. The values of the concentrations of the individual PLFAs detected in the samples indicated that ten bacterial species were present, with the GC content of the 16S rRNA increasing from 1 to 10. Analysis of denaturing gradient gel electrophoresis DGGE data indicated that the composition of the archeal community changed the consortia used for both RWDW and FTWDW treatment. Changes in band intensities indicated the presence of different components of the archeal communities. The results were not conclusive in terms of species identity as cloning, sequencing and phylogenetic analyses were not performed, but they did indicate microbial population shifts and species diversity for high rate anaerobic digestion. The results also confirmed prevalence of relatively few species during operation of SMBRs for treatment of RWDW and FTWDW, which suggested that the microorganisms that survived were either tolerant of toxic components of RWDW and FTWDW or they were able to remove polyphenols.
- Full Text:
- Date Issued: 2007
Ectomycorrhizal characterisation, species diversity and community dynamics in Pinus patula Schelcht. et Cham. plantations
- Authors: Hawley, Greer Leigh
- Date: 2006
- Subjects: Mycorrhizas Ectomycorrhizal fungi Pinus patula -- Irrigation -- South Africa Forests and forestry -- South Africa Forest ecology -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3951 , http://hdl.handle.net/10962/d1004010
- Description: Ectomycorrhizal (ECM) associations are important elements of forest biomes, connecting and transferring nutrients through an intricate and complex system of hyphal networks, ensuring plants of the nutrients they require, in nutrient poor soil. ECM research and particularly investigations into the diversity of the fungal partners has not received much attention in South Africa, hindering the advance of research in this field. This has been attributed to the difficulty of identifying the mycobionts involved in the symbiosis. The objectives of this study were to examine the ECM fungal diversity associating with Pinus patula, in selected forest plantations in Mpumalanga, South Africa. Both morphological and molecular techniques were used to identify specimens of both sporocarp collections and ECM root tip morphotypes. Morphological analysis of the ECM root tips involved characterisation of root morphology such as colour, branching and texture, and anatomical analysis examined hyphal arrangement in the root mantle and rhizomorphs. Molecular analysis involved sequencing of the Internal Transcribed Spacer (ITS) region and comparative BLAST analysis. Twenty-four sporocarp species were identified from 13 genera, namely: Amanita, Boletus, Clavulina, Inocybe, Lactarius, Rhizopogon, Russula, Scleroderma, Suillus, Tricholoma, Thelephora, Tomentella and Xerocomus. ECM root tip analysis led to the characterisation of 7 wild-type morphotypes identified as an Albatrellus sp., 2 Amanita species, a Rhizopogon sp., Thelephora terrestris, a Tomentella sp. and Scleroderma citrinum. A secondary objective was to determine whether fertilisation treatments within the study sites were responsible for differences in fungal species community structure. No evidence of a change in species diversity or shift in species composition was encountered. It is envisaged that these comprehensive ECM descriptions will be used as reference material to stimulate continued research in this field in South Africa.
- Full Text:
- Date Issued: 2006
- Authors: Hawley, Greer Leigh
- Date: 2006
- Subjects: Mycorrhizas Ectomycorrhizal fungi Pinus patula -- Irrigation -- South Africa Forests and forestry -- South Africa Forest ecology -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3951 , http://hdl.handle.net/10962/d1004010
- Description: Ectomycorrhizal (ECM) associations are important elements of forest biomes, connecting and transferring nutrients through an intricate and complex system of hyphal networks, ensuring plants of the nutrients they require, in nutrient poor soil. ECM research and particularly investigations into the diversity of the fungal partners has not received much attention in South Africa, hindering the advance of research in this field. This has been attributed to the difficulty of identifying the mycobionts involved in the symbiosis. The objectives of this study were to examine the ECM fungal diversity associating with Pinus patula, in selected forest plantations in Mpumalanga, South Africa. Both morphological and molecular techniques were used to identify specimens of both sporocarp collections and ECM root tip morphotypes. Morphological analysis of the ECM root tips involved characterisation of root morphology such as colour, branching and texture, and anatomical analysis examined hyphal arrangement in the root mantle and rhizomorphs. Molecular analysis involved sequencing of the Internal Transcribed Spacer (ITS) region and comparative BLAST analysis. Twenty-four sporocarp species were identified from 13 genera, namely: Amanita, Boletus, Clavulina, Inocybe, Lactarius, Rhizopogon, Russula, Scleroderma, Suillus, Tricholoma, Thelephora, Tomentella and Xerocomus. ECM root tip analysis led to the characterisation of 7 wild-type morphotypes identified as an Albatrellus sp., 2 Amanita species, a Rhizopogon sp., Thelephora terrestris, a Tomentella sp. and Scleroderma citrinum. A secondary objective was to determine whether fertilisation treatments within the study sites were responsible for differences in fungal species community structure. No evidence of a change in species diversity or shift in species composition was encountered. It is envisaged that these comprehensive ECM descriptions will be used as reference material to stimulate continued research in this field in South Africa.
- Full Text:
- Date Issued: 2006
African mead biotechnology and indigenous knowledge systems in iQhilika process development
- Authors: Cambray, Garth Anton
- Date: 2005
- Subjects: Biotechnology Indigenous peoples -- Africa Ethnoscience -- Africa Mead -- Africa Brewing -- Microbiology Honeybee Honey
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3929 , http://hdl.handle.net/10962/d1003988
- Description: While the production of mead, a fermented honey beverage, has declined in popularity around the world in recent centuries, a substantial mead industry continues to exist in Africa with an estimated annual production of 1 to 1.7 billion litres. This is largely an ‘invisible industry’, and has functioned outside the formal economy due to proscription of indigenous beverages during colonial times. The traditional African mead industry is, however, also now under pressure due to the environmental degradation of scarce natural ingredients, urbanisation and loss of indigenous knowledge systems (IKS) and, with time, the beverage will likely follow the declining trend of mead consumption observed elsewhere. An analysis of early reports of African mead production suggested that the Khoi-San, among the earliest inhabitants of the continent, are the originators of the mead making techniques which use fibrous plant materials derived from specific plant species, to facilitate mead fermentation in some way. The Eastern Cape represents a region with a large body of Khoi-San IKS preserved in their descendants among the Afrikaans and Xhosa populations. A survey to establish a baseline of mead-making technology in the Eastern Cape was undertaken, and involved interviewing traditional mead makers across an area of roughly 100 000 km2, showing that the mead, iQhilika(Xhosa) Kari (Khoi-San/Afrikaans), is produced using a very similar process throughout the region. This involves the roots of a Trichodiadema sp. plant (imoela – Xhosa, karimoer – Afrikaans/Khoi-San), honey, extract of brood and/or pollen and water. Various other fruit sugar sources were also found to be added at times producing seasonal beverages with unique organoleptic properties. A model traditional iQhilika production operation was investigated in order to describe the main features of the process. Biomass immobilised on Trichodiadema root segments was found to be distributed evenly through the profile of the bioreactor resulting in a well mixed fermentation and a productivity of 0.74 g EtOH/l/h. In the initial stages of fermentation, the ethanol yield was highest in the mid-regions of the bioreactor, but with time the regions closer to the surface, which had atmospheric contact had a higher yield. This phenomenon was attributed to aerobic fatty acid synthesis which allowed the yeast close to the surface to function more efficiently despite rising ethanol concentrations. The mead contained 44.25 g/l (7 % volume) ethanol produced in a fermentation time of 43.5 h. Yeast biomass in the traditional process was either immobilised in the form of flocs or attached to the Trichodiadema intonsum support. Electron microscopy revealed that the cells were covered in a layer of extra-cellular polymeric substance apparently assisting the immobilization, and which was populated by a consortium of yeasts and bacteria. Yeasts isolated from iQhilika brewed in two regions separated by 350 km were found to be very closely related Saccharomyces cerevisiae strains as determined by molecular genetic analysis. The traditional beverage was found to contain populations of Lactic acid bacteria (LAB), which are known spoilage organisms in other beverages. Spoilage characteristics of these organisms matched descriptions of spoilage provided by the IKS survey. Other possibly beneficial LAB, which may contribute useful flavour compounds, were also found to be present in the system. The basic functional aspects of the traditional process were used to design a continuous bench-scale tower bioreactor and process development was based on the IKS survey. This consisted of a packed bed bioreactor, consisting of 2 mm3 T. intonsum root segments, immobilising a novel Saccharomyces cerevisiae strain isolated from a traditional batch of iQhilika. The bioreactor performed well with a yield of close to the theoretical maximum and an ethanol productivity of 3.45 g EtOH/l/h. The parameters of the 5.6 l/d bench-scale bioreactor were used to design a full-scale production bioreactor with a planned maximum output of 330 l/d. This bioreactor had a productivity of 0.19 g EtOH/l/h. The organoleptic properties of the product produced were considered by a taste panel to be better than those of the product of the bench-scale tower bioreactor. This research was based on the development of IKS which imposed a number of constraints and obligations on the project to ensure environmental, and social, in addition to financial viability of the scale-up operation. Makana Meadery was established in partnership with Rhodes University as an empowerment company which, in addition to undertaking the commercialisation of the iQhilika process, would also develop methods for the production of scarce ingredients traditionally unsustainably sourced from fragile ecosystems, provide beekeeping training and the manufacture of beehives.
- Full Text:
- Date Issued: 2005
- Authors: Cambray, Garth Anton
- Date: 2005
- Subjects: Biotechnology Indigenous peoples -- Africa Ethnoscience -- Africa Mead -- Africa Brewing -- Microbiology Honeybee Honey
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3929 , http://hdl.handle.net/10962/d1003988
- Description: While the production of mead, a fermented honey beverage, has declined in popularity around the world in recent centuries, a substantial mead industry continues to exist in Africa with an estimated annual production of 1 to 1.7 billion litres. This is largely an ‘invisible industry’, and has functioned outside the formal economy due to proscription of indigenous beverages during colonial times. The traditional African mead industry is, however, also now under pressure due to the environmental degradation of scarce natural ingredients, urbanisation and loss of indigenous knowledge systems (IKS) and, with time, the beverage will likely follow the declining trend of mead consumption observed elsewhere. An analysis of early reports of African mead production suggested that the Khoi-San, among the earliest inhabitants of the continent, are the originators of the mead making techniques which use fibrous plant materials derived from specific plant species, to facilitate mead fermentation in some way. The Eastern Cape represents a region with a large body of Khoi-San IKS preserved in their descendants among the Afrikaans and Xhosa populations. A survey to establish a baseline of mead-making technology in the Eastern Cape was undertaken, and involved interviewing traditional mead makers across an area of roughly 100 000 km2, showing that the mead, iQhilika(Xhosa) Kari (Khoi-San/Afrikaans), is produced using a very similar process throughout the region. This involves the roots of a Trichodiadema sp. plant (imoela – Xhosa, karimoer – Afrikaans/Khoi-San), honey, extract of brood and/or pollen and water. Various other fruit sugar sources were also found to be added at times producing seasonal beverages with unique organoleptic properties. A model traditional iQhilika production operation was investigated in order to describe the main features of the process. Biomass immobilised on Trichodiadema root segments was found to be distributed evenly through the profile of the bioreactor resulting in a well mixed fermentation and a productivity of 0.74 g EtOH/l/h. In the initial stages of fermentation, the ethanol yield was highest in the mid-regions of the bioreactor, but with time the regions closer to the surface, which had atmospheric contact had a higher yield. This phenomenon was attributed to aerobic fatty acid synthesis which allowed the yeast close to the surface to function more efficiently despite rising ethanol concentrations. The mead contained 44.25 g/l (7 % volume) ethanol produced in a fermentation time of 43.5 h. Yeast biomass in the traditional process was either immobilised in the form of flocs or attached to the Trichodiadema intonsum support. Electron microscopy revealed that the cells were covered in a layer of extra-cellular polymeric substance apparently assisting the immobilization, and which was populated by a consortium of yeasts and bacteria. Yeasts isolated from iQhilika brewed in two regions separated by 350 km were found to be very closely related Saccharomyces cerevisiae strains as determined by molecular genetic analysis. The traditional beverage was found to contain populations of Lactic acid bacteria (LAB), which are known spoilage organisms in other beverages. Spoilage characteristics of these organisms matched descriptions of spoilage provided by the IKS survey. Other possibly beneficial LAB, which may contribute useful flavour compounds, were also found to be present in the system. The basic functional aspects of the traditional process were used to design a continuous bench-scale tower bioreactor and process development was based on the IKS survey. This consisted of a packed bed bioreactor, consisting of 2 mm3 T. intonsum root segments, immobilising a novel Saccharomyces cerevisiae strain isolated from a traditional batch of iQhilika. The bioreactor performed well with a yield of close to the theoretical maximum and an ethanol productivity of 3.45 g EtOH/l/h. The parameters of the 5.6 l/d bench-scale bioreactor were used to design a full-scale production bioreactor with a planned maximum output of 330 l/d. This bioreactor had a productivity of 0.19 g EtOH/l/h. The organoleptic properties of the product produced were considered by a taste panel to be better than those of the product of the bench-scale tower bioreactor. This research was based on the development of IKS which imposed a number of constraints and obligations on the project to ensure environmental, and social, in addition to financial viability of the scale-up operation. Makana Meadery was established in partnership with Rhodes University as an empowerment company which, in addition to undertaking the commercialisation of the iQhilika process, would also develop methods for the production of scarce ingredients traditionally unsustainably sourced from fragile ecosystems, provide beekeeping training and the manufacture of beehives.
- Full Text:
- Date Issued: 2005
Characterization of the hydantoin-hydrolysing system of Pseudomonas putida RU-KM3s
- Authors: Matcher, Gwynneth Felicity
- Date: 2005
- Subjects: Hydantoin Hydrolysis Pseudomonas Enzymes
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3939 , http://hdl.handle.net/10962/d1003998
- Description: The biocatalytic conversion of 5-monosubstituted hydantoin derivatives to optically pure amino acids involves two reaction steps: the hydrolysis of hydantoin to N-carbamylamino acid by an hydantoinase or dihydropyrimidinase enzyme, followed by conversion of the Ncarbamylamino acid to the corresponding amino acid by an N-carbamoylase enzyme. This biocatalytic process has been successfully applied in several industrial processes for the production of enantiomerically pure amino acids used in the synthesis of pharmaceuticals, insecticides, hormones, and food additives. P. putida RU-KM3S was selected for study based on inherent high levels of hydantoinase and N-carbamoylase activity. Subsequent biocatalytic analysis of the enzyme activity within this strain revealed unique properties thus prompting further characterization. The main focus of this research was the isolation of the genes encoding the hydantoin-hydrolysing pathway in RU-KM3S. A genomic library was constructed and screened for heterologous expression of the hydantoin-hydrolysing enzymes. However, this approach was unsuccessful prompting the use of transposon mutagenesis in order to circumvent the drawbacks associated with complementation studies. The enzymes responsible for hydantoin-hydrolysis were identified by insertional inactivation as a dihydropyrimidinase and b-ureidopropionase encoded by dhp and bup respectively. A third open reading frame, encoding a putative transport protein, was identified between the dhp and bup genes and appeared to share a promoter with bup. Analysis of the amino acid sequence deduced from bup and dhp substantiated the distinctive properties and potential industrial application of the L-enantioselective b-ureidopropionase and provided targets for potential optimisation of the substrate-selectivity and activity of the dihydropyrimidinase by site directed mutagenesis. Several transposon-generated mutants with an altered phenotype for growth on minimal medium with hydantoin as the sole source of nitrogen were also isolated. Analysis of the insertion events in these mutants revealed disruptions of genes encoding key elements of the Ntr global regulatory pathway. However, inactivation of these genes had no effect on the dihydropyrimidinase and b-ureidopropionase activity levels. An additional mutant in which the gene coding for the dihydrolipoamide succinyltransferase, which is involved in the TCA cycle, was isolated with reduced levels of both dihydropyrimidinase and b-ureidopropionase activities. These results indicated that the hydantoin-hydrolysis pathway in RU-KM3S is regulated by carbon rather than nitrogen catabolite repression. This was confirmed by the reduction of hydantoin-hydrolysis in cells grown in excess carbon as opposed to nitrogen. Identification of a putative CRP-binding site within the promoter region of these enzymes further supported the regulatory role of carbon catabolite repression (CCR). As CCR in Pseudomonads is poorly understood, elucidation of the mechanism by which the hydantoinhydrolysing pathway in RU-KM3S is regulated would provide valuable insight into this complex process.
- Full Text:
- Date Issued: 2005
- Authors: Matcher, Gwynneth Felicity
- Date: 2005
- Subjects: Hydantoin Hydrolysis Pseudomonas Enzymes
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3939 , http://hdl.handle.net/10962/d1003998
- Description: The biocatalytic conversion of 5-monosubstituted hydantoin derivatives to optically pure amino acids involves two reaction steps: the hydrolysis of hydantoin to N-carbamylamino acid by an hydantoinase or dihydropyrimidinase enzyme, followed by conversion of the Ncarbamylamino acid to the corresponding amino acid by an N-carbamoylase enzyme. This biocatalytic process has been successfully applied in several industrial processes for the production of enantiomerically pure amino acids used in the synthesis of pharmaceuticals, insecticides, hormones, and food additives. P. putida RU-KM3S was selected for study based on inherent high levels of hydantoinase and N-carbamoylase activity. Subsequent biocatalytic analysis of the enzyme activity within this strain revealed unique properties thus prompting further characterization. The main focus of this research was the isolation of the genes encoding the hydantoin-hydrolysing pathway in RU-KM3S. A genomic library was constructed and screened for heterologous expression of the hydantoin-hydrolysing enzymes. However, this approach was unsuccessful prompting the use of transposon mutagenesis in order to circumvent the drawbacks associated with complementation studies. The enzymes responsible for hydantoin-hydrolysis were identified by insertional inactivation as a dihydropyrimidinase and b-ureidopropionase encoded by dhp and bup respectively. A third open reading frame, encoding a putative transport protein, was identified between the dhp and bup genes and appeared to share a promoter with bup. Analysis of the amino acid sequence deduced from bup and dhp substantiated the distinctive properties and potential industrial application of the L-enantioselective b-ureidopropionase and provided targets for potential optimisation of the substrate-selectivity and activity of the dihydropyrimidinase by site directed mutagenesis. Several transposon-generated mutants with an altered phenotype for growth on minimal medium with hydantoin as the sole source of nitrogen were also isolated. Analysis of the insertion events in these mutants revealed disruptions of genes encoding key elements of the Ntr global regulatory pathway. However, inactivation of these genes had no effect on the dihydropyrimidinase and b-ureidopropionase activity levels. An additional mutant in which the gene coding for the dihydrolipoamide succinyltransferase, which is involved in the TCA cycle, was isolated with reduced levels of both dihydropyrimidinase and b-ureidopropionase activities. These results indicated that the hydantoin-hydrolysis pathway in RU-KM3S is regulated by carbon rather than nitrogen catabolite repression. This was confirmed by the reduction of hydantoin-hydrolysis in cells grown in excess carbon as opposed to nitrogen. Identification of a putative CRP-binding site within the promoter region of these enzymes further supported the regulatory role of carbon catabolite repression (CCR). As CCR in Pseudomonads is poorly understood, elucidation of the mechanism by which the hydantoinhydrolysing pathway in RU-KM3S is regulated would provide valuable insight into this complex process.
- Full Text:
- Date Issued: 2005
Intraspecific comparison of Phanerochaete chrysosporium strains peroxidase production, pollutant degradation and mycelial differentiation
- Authors: Fraser, Sheena Janet
- Date: 2005
- Subjects: Phanerochaete Pollutants -- Biodegradation Lignin -- Biodegradation Bioremediation Peroxidase Fungi -- Differentiation
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3964 , http://hdl.handle.net/10962/d1004023
- Description: The wood-degrading basidiomycete, Phanerochaete chrysosporium, has been studied as a model organism in elucidating the mechanisms and pathways enabling this white-rot fungus to degrade recalcitrant lignin. These same mechanisms are implicated in the mineralisation of environmentally persistent, toxic phenolic chemicals. For this reason, P. chrysosporium has been exploited in a number of environmentally sound technologies, including the degradation of the indigestible lignin component in agricultural waste for the generation of digestible animal feedstocks or high sugar content raw materials for ethanol production; brightening processes in the pulp and paper industry; the detoxification and decolourisation of industrial effluents; and the bioremediation of hazardous waste sites. The improvement of these technologies is dependant on ongoing research involving strain selection, strain development using genetic engineering approaches and process development. Strain improvement using non-recombinant methods is beneficial in that it does not limit the inherent robustness observed amongst natural variants. In this research, through a breeding programme, ten P.chrysosporium sibling strains were screened for variable ligninase activities and pollutant degradation capabilities in order to further describe previously identified differences between these organisms. A conventional stationary liquid culture technique was effectively miniaturised from 10 ml flask cultures to a 96-well microtitre plate format, for the assessment of multigenic traits amongst sibling strains. Using the 96-well microtitre plate method, the relationships between P. chrysosporium growth kinetics, peroxidase production, pollutant sensitivity and pollutant degradation was explored. Significant correlations were primarily associated with P. chrysosporium growth [P < 0.05]. Percentage p-cresol removal and tannic acid tolerance were both correlated with a shorter lag phase in growth [tannic acid: r = 0.7698, P < 0.05; p-cresol: r = 0.7584, P < 0.05] and lower stationary phase biomass levels [tannic acid: r = 0.8177, P < 0.05; p-cresol: r = 0.7803, P < 0.05]. A significant correlation (linear relationship) was also detected between percentage Poly-R478 decolourisation and time of onset of MnP [r = 0.9689, P < 0.001]. No correlation was observed between dye decolourisation, p-cresol degradation, lignin degradation and lignin peroxidase (LiP) or manganese peroxidase (MnP) activities [P > 0.05]. These results imply that differences in the biosynthetic pathways for biomass accumulation in sibling strains play a significant role in the intraspecific variation observed in pollutant sensitivity, pollutant degradation, and enzyme production. Categorical analysis of intraspecific differences was assessed according to four criterions. These included growth, extracellular peroxidase activities, tolerance to toxic pollutants and the biodegradation of model pollutants. Sibling strains showing the most variable responses in three or more of the selective criterion were recommended for further studies. These strains include P. chrysosporium ME446, BS 2.52, BS 13, BS 17, BS 18, and BS 24. Interestingly, BS 2.52 (a dikaryotic strain generating from the crossing of two haploid progeny) showed significantly lower degradation capabilities than the wildtype parent strain ME446. The inherited variability observed between sibling strains is to be further explored through proteome and transcriptome analysis and genetic linkage studies aimed at describing the mechanisms or pathways conferring tolerance to or degradation of environmental pollutants. In examining fewer organisms at this next level, the number of replicates examined can be increased and thus the power of detection of experimental procedures improved, enabling the detection of multigenic traits amongst genetically related organisms. Growth was shown to play a significant role in the intraspecific differences detected in pollutant sensitivity and degradation between sibling strains. Little is known about the mechanism of growth and differentiation, or the role of differentiation in regulating the lignolytic activity in this organism. The membrane gradostat bioreactor and a unique plug-flow membrane bioreactor were evaluated as novel tools with which to further explore the relationship between secondary metabolism, pollutant degradation and biofilm development in sibling strains. High yield MnP production at levels as high as 1478.8 U.l-1 was achieved using a laboratory scale membrane gradostat bioreactor. Furthermore, extensive mycelial differentiation and tissue formation are reported for P. chrysosporium in both the membrane gradostat bioreactor and plug-flow membrane bioreactor. Intraspecific differences in the extent of this differentiation were observed in strains ME446, BS 13, BS 17 and BS 26 cultured using the membrane gradostat bioreactor, highlighting the potential of these techniques as a platform for future strain improvement strategies.
- Full Text:
- Date Issued: 2005
- Authors: Fraser, Sheena Janet
- Date: 2005
- Subjects: Phanerochaete Pollutants -- Biodegradation Lignin -- Biodegradation Bioremediation Peroxidase Fungi -- Differentiation
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3964 , http://hdl.handle.net/10962/d1004023
- Description: The wood-degrading basidiomycete, Phanerochaete chrysosporium, has been studied as a model organism in elucidating the mechanisms and pathways enabling this white-rot fungus to degrade recalcitrant lignin. These same mechanisms are implicated in the mineralisation of environmentally persistent, toxic phenolic chemicals. For this reason, P. chrysosporium has been exploited in a number of environmentally sound technologies, including the degradation of the indigestible lignin component in agricultural waste for the generation of digestible animal feedstocks or high sugar content raw materials for ethanol production; brightening processes in the pulp and paper industry; the detoxification and decolourisation of industrial effluents; and the bioremediation of hazardous waste sites. The improvement of these technologies is dependant on ongoing research involving strain selection, strain development using genetic engineering approaches and process development. Strain improvement using non-recombinant methods is beneficial in that it does not limit the inherent robustness observed amongst natural variants. In this research, through a breeding programme, ten P.chrysosporium sibling strains were screened for variable ligninase activities and pollutant degradation capabilities in order to further describe previously identified differences between these organisms. A conventional stationary liquid culture technique was effectively miniaturised from 10 ml flask cultures to a 96-well microtitre plate format, for the assessment of multigenic traits amongst sibling strains. Using the 96-well microtitre plate method, the relationships between P. chrysosporium growth kinetics, peroxidase production, pollutant sensitivity and pollutant degradation was explored. Significant correlations were primarily associated with P. chrysosporium growth [P < 0.05]. Percentage p-cresol removal and tannic acid tolerance were both correlated with a shorter lag phase in growth [tannic acid: r = 0.7698, P < 0.05; p-cresol: r = 0.7584, P < 0.05] and lower stationary phase biomass levels [tannic acid: r = 0.8177, P < 0.05; p-cresol: r = 0.7803, P < 0.05]. A significant correlation (linear relationship) was also detected between percentage Poly-R478 decolourisation and time of onset of MnP [r = 0.9689, P < 0.001]. No correlation was observed between dye decolourisation, p-cresol degradation, lignin degradation and lignin peroxidase (LiP) or manganese peroxidase (MnP) activities [P > 0.05]. These results imply that differences in the biosynthetic pathways for biomass accumulation in sibling strains play a significant role in the intraspecific variation observed in pollutant sensitivity, pollutant degradation, and enzyme production. Categorical analysis of intraspecific differences was assessed according to four criterions. These included growth, extracellular peroxidase activities, tolerance to toxic pollutants and the biodegradation of model pollutants. Sibling strains showing the most variable responses in three or more of the selective criterion were recommended for further studies. These strains include P. chrysosporium ME446, BS 2.52, BS 13, BS 17, BS 18, and BS 24. Interestingly, BS 2.52 (a dikaryotic strain generating from the crossing of two haploid progeny) showed significantly lower degradation capabilities than the wildtype parent strain ME446. The inherited variability observed between sibling strains is to be further explored through proteome and transcriptome analysis and genetic linkage studies aimed at describing the mechanisms or pathways conferring tolerance to or degradation of environmental pollutants. In examining fewer organisms at this next level, the number of replicates examined can be increased and thus the power of detection of experimental procedures improved, enabling the detection of multigenic traits amongst genetically related organisms. Growth was shown to play a significant role in the intraspecific differences detected in pollutant sensitivity and degradation between sibling strains. Little is known about the mechanism of growth and differentiation, or the role of differentiation in regulating the lignolytic activity in this organism. The membrane gradostat bioreactor and a unique plug-flow membrane bioreactor were evaluated as novel tools with which to further explore the relationship between secondary metabolism, pollutant degradation and biofilm development in sibling strains. High yield MnP production at levels as high as 1478.8 U.l-1 was achieved using a laboratory scale membrane gradostat bioreactor. Furthermore, extensive mycelial differentiation and tissue formation are reported for P. chrysosporium in both the membrane gradostat bioreactor and plug-flow membrane bioreactor. Intraspecific differences in the extent of this differentiation were observed in strains ME446, BS 13, BS 17 and BS 26 cultured using the membrane gradostat bioreactor, highlighting the potential of these techniques as a platform for future strain improvement strategies.
- Full Text:
- Date Issued: 2005
Isolation and characterization of a novel thermostable and catalytically efficient laccase from Peniophora sp. strain UD4
- Authors: Jordaan, Justin
- Date: 2005
- Subjects: Enzymes Enzymes -- Industrial applications Peniophora Laccase
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3970 , http://hdl.handle.net/10962/d1004029
- Description: Enzymes are becoming an effective tool in industrial processes, from crude applications such as bioremediation to fine processes such as chirally selective biocatalysis. The ligninolytic enzymes have recently received considerable attention for industrial application due to both their broad substrate range and their ability to degrade the most recalcitrant natural polymer, lignin. This group of enzymes was therefore identified as the target group for this study. Improved enzyme properties are constantly being sought to enhance the range of applications for enzymes. Biodiversity provides a wide variety of enzymes. Several researchers have concentrated on extremophiles as their primary source of superior enzymes, consequently neglecting temperate environments in their search for these enzymes. The relatively neglected fungal biodiversity of South Africa provided an opportunity to test the hypothesis that potentially important industrial enzymes with unusual properties could be isolated from mesophilic basidiomycetous fungi. Subsequent screening of Eastern Cape biodiversity for thermostable ligninolytic enzymes from basidiomycetes resulted in the isolation of a novel laccase enzyme from a basidiomycetous species. This fungus was identified as Peniophora sp. UD4 by phylogenetic analysis of rDNA ITS sequences. Initial studies indicated a superior optimum temperature of 70°C and thermostability, indicated by no loss in activity at 60°C over nine hours. Further characterization of the laccase revealed a broader than usual substrate range through its unusual ability to oxidatively couple DMAB and MBTH. The laccase also exhibited a broad pH oxidation range for ABTS (pH 2 – 6.8), and a relatively high affinity (K_m_ = 0.0123 mM) and catalytic efficiency (63 252 mM^(-1)^s^(-1)^) for ABTS as a substrate. The laccase activity from Peniophora sp. UD4 was shown to be comprised of three isozymes with a molecular weight of 62 kDa and pI’s of 6.33, 6.45 and 6.50. Investigation of the nutrient and physical factors affecting ligninolytic enzyme production and growth of Peniophora sp. UD4 indicated that the wild-type organism was unsuitable for large scale production of the thermostable laccase due to the low levels of laccase production. The thermostable laccase was applied to defouling of ultrafiltration membranes, bioremediation of industrial waste streams, biocatalysis, and biosensor technology as potential applications. Application of the Peniophora sp. UD4 laccase to defouling of membranes used for ultrafiltration of brown water showed large flux recoveries of 31, 21 and 21% after the first three defouling recycles respectively, compared to 3% for the control without immobilized enzyme. The novel laccase showed potential for the bioremediation of industrial waste streams, the most successful being that of bleach plant effluent, where a reduction of 66% of the phenolic load was achieved. Application of the novel laccase to biocatalytic oxidation of ferulic acid and (±)-α-pinene showed higher product yield as compared to oxidation of these compounds by Trametes versicolor laccase in mediated and non-mediated systems. The major products of (±)-α-pinene oxidation were identified as verbenol and trans-sorberol. The Peniophora sp. UD4 laccase was successfully applied to biosensor technology, which benchmarked significantly better than Trametes versicolor laccase for the detection of 4-chlorophenol. The biosensor developed with laccase from UD4 by covalent binding to a glassy carbon electrode exhibited the best combination of sensitivity and stability. This thesis shows that a laccase with superior properties was obtained from a mesophilic South African basidiomycete. The catalytic properties displayed by the novel laccase from Peniophora sp. UD4 all contribute to the increased industrial applicability of laccases, and may be the most industrially feasible enzyme of its class isolated to date.
- Full Text:
- Date Issued: 2005
- Authors: Jordaan, Justin
- Date: 2005
- Subjects: Enzymes Enzymes -- Industrial applications Peniophora Laccase
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3970 , http://hdl.handle.net/10962/d1004029
- Description: Enzymes are becoming an effective tool in industrial processes, from crude applications such as bioremediation to fine processes such as chirally selective biocatalysis. The ligninolytic enzymes have recently received considerable attention for industrial application due to both their broad substrate range and their ability to degrade the most recalcitrant natural polymer, lignin. This group of enzymes was therefore identified as the target group for this study. Improved enzyme properties are constantly being sought to enhance the range of applications for enzymes. Biodiversity provides a wide variety of enzymes. Several researchers have concentrated on extremophiles as their primary source of superior enzymes, consequently neglecting temperate environments in their search for these enzymes. The relatively neglected fungal biodiversity of South Africa provided an opportunity to test the hypothesis that potentially important industrial enzymes with unusual properties could be isolated from mesophilic basidiomycetous fungi. Subsequent screening of Eastern Cape biodiversity for thermostable ligninolytic enzymes from basidiomycetes resulted in the isolation of a novel laccase enzyme from a basidiomycetous species. This fungus was identified as Peniophora sp. UD4 by phylogenetic analysis of rDNA ITS sequences. Initial studies indicated a superior optimum temperature of 70°C and thermostability, indicated by no loss in activity at 60°C over nine hours. Further characterization of the laccase revealed a broader than usual substrate range through its unusual ability to oxidatively couple DMAB and MBTH. The laccase also exhibited a broad pH oxidation range for ABTS (pH 2 – 6.8), and a relatively high affinity (K_m_ = 0.0123 mM) and catalytic efficiency (63 252 mM^(-1)^s^(-1)^) for ABTS as a substrate. The laccase activity from Peniophora sp. UD4 was shown to be comprised of three isozymes with a molecular weight of 62 kDa and pI’s of 6.33, 6.45 and 6.50. Investigation of the nutrient and physical factors affecting ligninolytic enzyme production and growth of Peniophora sp. UD4 indicated that the wild-type organism was unsuitable for large scale production of the thermostable laccase due to the low levels of laccase production. The thermostable laccase was applied to defouling of ultrafiltration membranes, bioremediation of industrial waste streams, biocatalysis, and biosensor technology as potential applications. Application of the Peniophora sp. UD4 laccase to defouling of membranes used for ultrafiltration of brown water showed large flux recoveries of 31, 21 and 21% after the first three defouling recycles respectively, compared to 3% for the control without immobilized enzyme. The novel laccase showed potential for the bioremediation of industrial waste streams, the most successful being that of bleach plant effluent, where a reduction of 66% of the phenolic load was achieved. Application of the novel laccase to biocatalytic oxidation of ferulic acid and (±)-α-pinene showed higher product yield as compared to oxidation of these compounds by Trametes versicolor laccase in mediated and non-mediated systems. The major products of (±)-α-pinene oxidation were identified as verbenol and trans-sorberol. The Peniophora sp. UD4 laccase was successfully applied to biosensor technology, which benchmarked significantly better than Trametes versicolor laccase for the detection of 4-chlorophenol. The biosensor developed with laccase from UD4 by covalent binding to a glassy carbon electrode exhibited the best combination of sensitivity and stability. This thesis shows that a laccase with superior properties was obtained from a mesophilic South African basidiomycete. The catalytic properties displayed by the novel laccase from Peniophora sp. UD4 all contribute to the increased industrial applicability of laccases, and may be the most industrially feasible enzyme of its class isolated to date.
- Full Text:
- Date Issued: 2005
The degradation of lignocellulose in a biologically-generated sulphidic environment
- Authors: Roman, Henry James
- Date: 2005
- Subjects: Lignocellulose Sulfides Lignin Lignocellulose -- Biodegradation Mines and mineral resources -- Waste disposal Acid mine drainage
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3997 , http://hdl.handle.net/10962/d1004057
- Description: South Africa is renowned for its mining industry. The period over which the polluted waters from the existing and abandoned mines will require treatment has driven research into the development of passive treatment systems. These waters are characterised by a low pH, high concentrations of heavy metals, high levels of sulphate salts and low concentrations of organic material. The biological treatment of these waters has been a subject of increasing focus as an alternative to physicochemical treatment. The utilisation of lignocellulose as a carbon source has been restricted by the amount of reducing equivalents available within the lignocellulose matrix. After a few months of near 100% sulphate reduction, it was found that although there was a large fraction of lignin and cellulose remaining, sulphate reduction was reduced to less than 20%. The present study demonstrated that lignocellulose can be utilised as a carbon source for sulphate reduction. It was established that lignocellulose degradation was enhanced under biosulphidogenic conditions and that lignin could be degraded by a sulphate reducing microbial consortium. It was established using lignin model compounds synthesized in our laboratory, that the bonds within the lignin polymer can be cleaved within the sulphidic environment. The presence of cellulolytic enzymes, using CMCase as a marker enzyme, was detected within the sulphate reducing microbial consortium. Based on the results obtained a descriptive model was formulated for the degradation of lignocellulose under biosulphidogenic conditions. It was determined that the initial reduction in sulphate observed using lignocellulose as a carbon source was due to the easily extractable components. The degradation of which resulted in the production of sulphide, which aided in the degradation of lignin, allowing greater access to cellulose. Once the easily extractable material is exhausted, the cycle is halted, unless the sulphide production can be maintained. This is the focus of an ongoing project, testing the hypothesis that an easy to assimilate carbon source added after exhaustion of the easily extractable material, can maintain the sulphide production.
- Full Text:
- Date Issued: 2005
- Authors: Roman, Henry James
- Date: 2005
- Subjects: Lignocellulose Sulfides Lignin Lignocellulose -- Biodegradation Mines and mineral resources -- Waste disposal Acid mine drainage
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3997 , http://hdl.handle.net/10962/d1004057
- Description: South Africa is renowned for its mining industry. The period over which the polluted waters from the existing and abandoned mines will require treatment has driven research into the development of passive treatment systems. These waters are characterised by a low pH, high concentrations of heavy metals, high levels of sulphate salts and low concentrations of organic material. The biological treatment of these waters has been a subject of increasing focus as an alternative to physicochemical treatment. The utilisation of lignocellulose as a carbon source has been restricted by the amount of reducing equivalents available within the lignocellulose matrix. After a few months of near 100% sulphate reduction, it was found that although there was a large fraction of lignin and cellulose remaining, sulphate reduction was reduced to less than 20%. The present study demonstrated that lignocellulose can be utilised as a carbon source for sulphate reduction. It was established that lignocellulose degradation was enhanced under biosulphidogenic conditions and that lignin could be degraded by a sulphate reducing microbial consortium. It was established using lignin model compounds synthesized in our laboratory, that the bonds within the lignin polymer can be cleaved within the sulphidic environment. The presence of cellulolytic enzymes, using CMCase as a marker enzyme, was detected within the sulphate reducing microbial consortium. Based on the results obtained a descriptive model was formulated for the degradation of lignocellulose under biosulphidogenic conditions. It was determined that the initial reduction in sulphate observed using lignocellulose as a carbon source was due to the easily extractable components. The degradation of which resulted in the production of sulphide, which aided in the degradation of lignin, allowing greater access to cellulose. Once the easily extractable material is exhausted, the cycle is halted, unless the sulphide production can be maintained. This is the focus of an ongoing project, testing the hypothesis that an easy to assimilate carbon source added after exhaustion of the easily extractable material, can maintain the sulphide production.
- Full Text:
- Date Issued: 2005
Capsule immobilisation of sulphate-reducing bacteria and application in disarticulated systems
- Authors: Sanyahumbi, Douglas
- Date: 2004
- Subjects: Sulfur bacteria , Water -- Purification -- Biological treatment
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3935 , http://hdl.handle.net/10962/d1003994
- Description: Biotechnology of sulphate reducing bacteria has developed rapidly in recent years with the recognition of their extensive and diverse biocatalytic potential. However, their application in a number of areas has been constrained due to problems including poor cell retention within the continuous bioprocess reactor environment, and contamination of the treated stream with residual organic feed components and cell biomass. These problems have so far excluded the application of biological sulphate reduction in the treatment of ‘clean’ inorganic waste streams where components such as sulphate, acidity and heavy metal contamination require treatment. This study investigated the effective immobilisation of sulphate reducing bacterial cultures and proposed that the disarticulation of the electron donor and carbon source supply using such systems would create the basis for their application in the treatment of ‘clean’ inorganic waste streams. A functional and stable sulphate reducing culture was selected and following evaluation using a number of techniques, was immobilised by encapsulation within a calcium-alginate-xanthum gum membrane to give robust capsules with good sulphate reduction activity. The concept of disarticulation was investigated in a swing-back cycle where the carbon source was excluded and the electron donor supplied in the form of hydrogen gas in a continuous up-flow capsule-packed column reactor. Following a period of operation in this mode (4-12 days), the system was swung back to a carbon feed to supply requirements of cell maintenance (2-3 days). Three types of synthetic ‘clean’ inorganic waste stream treatments were investigated, including sulphate removal, neutralisation of acidity and heavy metal (copper and lead) removal. The results showed: • Sulphate removal at a rate of 50 mg SO₄²⁻L/day/g initial wet mass of capsules during three 4-day cycles of electron donor phase. This was comparable to the performance of free cell systems; • Neutralisation of acidity where influent pH values of 2.4 and 4.0 were elevated to above pH 7.5; • Copper removal of 99 and 85 % was achieved with initial copper concentrations of 2 and 60 mg/L respectively; • Percentage lead removal values of 49 and 78 % were achieved; This first report on the application of the concept of capsular immobilisation and disarticulation in the treatment of ‘clean’ inorganic waste streams will require future studies in order to extend the development of the full potential of the concept.
- Full Text:
- Date Issued: 2004
- Authors: Sanyahumbi, Douglas
- Date: 2004
- Subjects: Sulfur bacteria , Water -- Purification -- Biological treatment
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3935 , http://hdl.handle.net/10962/d1003994
- Description: Biotechnology of sulphate reducing bacteria has developed rapidly in recent years with the recognition of their extensive and diverse biocatalytic potential. However, their application in a number of areas has been constrained due to problems including poor cell retention within the continuous bioprocess reactor environment, and contamination of the treated stream with residual organic feed components and cell biomass. These problems have so far excluded the application of biological sulphate reduction in the treatment of ‘clean’ inorganic waste streams where components such as sulphate, acidity and heavy metal contamination require treatment. This study investigated the effective immobilisation of sulphate reducing bacterial cultures and proposed that the disarticulation of the electron donor and carbon source supply using such systems would create the basis for their application in the treatment of ‘clean’ inorganic waste streams. A functional and stable sulphate reducing culture was selected and following evaluation using a number of techniques, was immobilised by encapsulation within a calcium-alginate-xanthum gum membrane to give robust capsules with good sulphate reduction activity. The concept of disarticulation was investigated in a swing-back cycle where the carbon source was excluded and the electron donor supplied in the form of hydrogen gas in a continuous up-flow capsule-packed column reactor. Following a period of operation in this mode (4-12 days), the system was swung back to a carbon feed to supply requirements of cell maintenance (2-3 days). Three types of synthetic ‘clean’ inorganic waste stream treatments were investigated, including sulphate removal, neutralisation of acidity and heavy metal (copper and lead) removal. The results showed: • Sulphate removal at a rate of 50 mg SO₄²⁻L/day/g initial wet mass of capsules during three 4-day cycles of electron donor phase. This was comparable to the performance of free cell systems; • Neutralisation of acidity where influent pH values of 2.4 and 4.0 were elevated to above pH 7.5; • Copper removal of 99 and 85 % was achieved with initial copper concentrations of 2 and 60 mg/L respectively; • Percentage lead removal values of 49 and 78 % were achieved; This first report on the application of the concept of capsular immobilisation and disarticulation in the treatment of ‘clean’ inorganic waste streams will require future studies in order to extend the development of the full potential of the concept.
- Full Text:
- Date Issued: 2004
Characterisation of the J domain aminoacid residues important for the interaction of DNAJ-like proteins with HSP70 chaperones
- Authors: Hennessy, Fritha
- Date: 2004
- Subjects: Heat shock proteins Protein folding Proteins -- Analysis Proteins -- Structure Molecular chaperones
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3937 , http://hdl.handle.net/10962/d1003996
- Description: The 70 kDa heat shock proteins (Hsp70s) are vital for normal protein folding, as they stabilise the unfolded state of nascent polypeptides, allowing these sufficient time to attain a correct tertiary structure. Hsp70s are aided by the DnaJ-like family of proteins, which interact with Hsp70s in order to enhance the chaperone activity of these proteins. DnaJ-like proteins contain a J domain, a seventy amino acid domain consisting of four α-helices, which is defined by the presence of an invariant tripeptide of histidine, proline and aspartic acid (HPD motif). This motif is key to the interaction between DnaJ-like proteins and Hsp70s. This thesis has focused on determining the presence of other conserved residues in the J domain and their role in mediating the interaction of DnaJ-like proteins with partner Hsp70s. DnaJ-like proteins from Agrobacterium tumefaciens RUOR were isolated and used as a model system. A. tumefaciens DnaJ (Agt DnaJ) was able to replace the lack of E. coli DnaJ in an E. coli null mutant strain, however, additional A. tumefaciens DnaJ-like proteins Agt DjC1/DjlA, Agt DjC2 and Agt DjC5 were unable to complement for the lack of E. coli DnaJ. Replacement of the Agt DnaJ J domain with J domains from these proteins resulted in non-functional chimeric proteins, despite some sequence conservation. The kinetics of the basal specific ATPase activity of Agt DnaK, and its ability to have this activity stimulated by Agt DnaJ and Agt DnaJ-H33Q were also investigated. Stimulation of the ATPase activity by Agt DnaJ ranged between 1.5 to 2 fold, but Agt DnaJ-H33Q was unable to stimulate the basal ATPase activity. Conserved amino acids in the J domain were identified in silico, and these residues were substituted in the J domain of Agt DnaJ. The ability of these derivative proteins to replace E. coli DnaJ was investigated. Alterations in the HPD motif gave rise to proteins unable to complement for lack of E. coli DnaJ, consistent with literature. Agt DnaJ-R26A was unable to replace E. coli DnaJ suggesting that Arg26 could be key to the interaction with partner Hsp70s. Agt DnaJ-D59A was unable to replace E. coli DnaJ; substitutions in Asp59 have not previously been shown to impact on the function of DnaJ. Substituting Arg63 in Agt DnaJ abrogated the levels of complementation. Substitution of several structural residues was also found to disrupt the in vivo function of Agt DnaJ suggesting that the maintenance of the structural integrity of the J domain was important for function. This study has identified a number of residues critical to the structure and function of the J domain of Agt DnaJ, and potentially of general importance as molecular determinants for DnaJ-Hsp70 interaction.
- Full Text:
- Date Issued: 2004
- Authors: Hennessy, Fritha
- Date: 2004
- Subjects: Heat shock proteins Protein folding Proteins -- Analysis Proteins -- Structure Molecular chaperones
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3937 , http://hdl.handle.net/10962/d1003996
- Description: The 70 kDa heat shock proteins (Hsp70s) are vital for normal protein folding, as they stabilise the unfolded state of nascent polypeptides, allowing these sufficient time to attain a correct tertiary structure. Hsp70s are aided by the DnaJ-like family of proteins, which interact with Hsp70s in order to enhance the chaperone activity of these proteins. DnaJ-like proteins contain a J domain, a seventy amino acid domain consisting of four α-helices, which is defined by the presence of an invariant tripeptide of histidine, proline and aspartic acid (HPD motif). This motif is key to the interaction between DnaJ-like proteins and Hsp70s. This thesis has focused on determining the presence of other conserved residues in the J domain and their role in mediating the interaction of DnaJ-like proteins with partner Hsp70s. DnaJ-like proteins from Agrobacterium tumefaciens RUOR were isolated and used as a model system. A. tumefaciens DnaJ (Agt DnaJ) was able to replace the lack of E. coli DnaJ in an E. coli null mutant strain, however, additional A. tumefaciens DnaJ-like proteins Agt DjC1/DjlA, Agt DjC2 and Agt DjC5 were unable to complement for the lack of E. coli DnaJ. Replacement of the Agt DnaJ J domain with J domains from these proteins resulted in non-functional chimeric proteins, despite some sequence conservation. The kinetics of the basal specific ATPase activity of Agt DnaK, and its ability to have this activity stimulated by Agt DnaJ and Agt DnaJ-H33Q were also investigated. Stimulation of the ATPase activity by Agt DnaJ ranged between 1.5 to 2 fold, but Agt DnaJ-H33Q was unable to stimulate the basal ATPase activity. Conserved amino acids in the J domain were identified in silico, and these residues were substituted in the J domain of Agt DnaJ. The ability of these derivative proteins to replace E. coli DnaJ was investigated. Alterations in the HPD motif gave rise to proteins unable to complement for lack of E. coli DnaJ, consistent with literature. Agt DnaJ-R26A was unable to replace E. coli DnaJ suggesting that Arg26 could be key to the interaction with partner Hsp70s. Agt DnaJ-D59A was unable to replace E. coli DnaJ; substitutions in Asp59 have not previously been shown to impact on the function of DnaJ. Substituting Arg63 in Agt DnaJ abrogated the levels of complementation. Substitution of several structural residues was also found to disrupt the in vivo function of Agt DnaJ suggesting that the maintenance of the structural integrity of the J domain was important for function. This study has identified a number of residues critical to the structure and function of the J domain of Agt DnaJ, and potentially of general importance as molecular determinants for DnaJ-Hsp70 interaction.
- Full Text:
- Date Issued: 2004
Development of a hydantoin-hydrolysing biocatalyst for the production of optically pure amino acids using Agrobacterium tumefaciens strain RU-ORPN1
- Authors: Foster, Ingrid Margaret
- Date: 2004
- Subjects: Agrobacterium tumefaciens Amino acids Hydantoin Hydrolysis Enzymes
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3943 , http://hdl.handle.net/10962/d1004002
- Description: A calcium alginate bead-immobilised biocatalyst was developed utilising the D-hydantoinase and D-N-carbamoylase from a novel, mutant Agrobacterium tumefaciens strain RU-ORPN1. The growth conditions for the inducer-independent strain were optimised for production of hydantoinase and N-carbamoylase activities. Methods for the preparation of crude enzyme extracts were evaluated in terms of hydantoinase and N-carbamoylase activities produced. After comparison of the enzyme activities and stabilities in various extracts from fresh and frozen cells, sonication of frozen cells for 5 minutes was found to be the best method for the production of the enzyme extract. The optimal pH and temperature for the hydantoinase activity were pH 10 and 30°C, respectively, while pH 9 and 40°C were optimal for Ncarbamoylase activity. The hydantoinase activity was enhanced by the addition of Mg^(2+) ions to the enzyme extract and the N-carbamoylase was enhanced by the addition of Mg^(2+), Mn^(2+) or Zn^(2+) ions to the enzyme extract. The enzyme activities increased in the presence of ATP suggesting that the enzymes may be ATP-dependent. The addition of DTT and PMSF to the enzyme extract enhanced the hydantoinase activity but had no effect on the N-carbamoylase activity. The N-carbamoylase was unstable at 40°C and was almost completely inactivated after 24 hours incubation at this temperature. The hydantoinase and N-carbamoylase appeared to be insoluble. Various techniques were investigated for the solubilisation of the enzymes including various cell lysis methods, cell lysis at extremes of pH and ionic strength, addition of a reducing agent and protease inhibitors, and treatment with hydrolysing enzymes and detergents. Treatment with Triton X-100 was most effective for the solubilisation of the enzymes indicating that the enzymes were membrane-bound. Hydropathy and transmembrane prediction plots of the predicted amino acid sequences for two identified N-carbamoylase genes from A. tumefaciens RU-ORPN1 revealed possible transmembrane regions in the amino acid sequences, and thus supported the hypothesis that the enzymes were membrane-bound. Various methods were evaluated for the immobilisation of the enzymes in whole cells and enzyme extracts. Immobilisation of the enzyme extract in calcium alginate beads was found to be the best method in terms of enzyme activity retention and stability. The hydantoinase retained 55% activity while the N-carbamoylase exhibited a remarkable sevenfold increase in activity after immobilisation by this method. Furthermore, the hydantoinase activity increased after storage at 4°C for 21 days, while the N-carbamoylase retained 30% activity after this storage period. The calcium alginate bead-immobilised enzymes were further biochemically characterised and then applied in a bioreactor system for the production of D-hydroxyphenylglycine (D-HPG) from D,L-5-hydroxyphenylhydantoin (D,L-5-HPH). The pH and temperature optima for the immobilised hydantoinase were pH 7 and 50°C, respectively, while pH 8 and 40°C were optimal for the immobilised N-carbamoylase enzyme. The immobilised enzymes showed improved thermostability at 40°C in comparison to the free enzymes and retained high levels of activity after five repeated batch reactions. Low levels of conversion were obtained in a packed-bed bioreactor containing the A. tumefaciens RU-ORPN1 biocatalyst due to the low hydantoinase activity present in the strain, relative to N-carbamoylase. A novel, packed-bed bioreactor system was therefore developed for the production of D-HPG from D,L-5-HPH using the A. tumefaciens biocatalyst in combination with a Pseudomonas sp. biocatalyst having high hydantoinase activity. A conversion yield of 22 to 30% was achieved for the production of D-HPG from D,L-5-HPH over 5 days operation demonstrating that the hydantoin-hydrolysing enzymes from A. tumefaciens RU-ORPN1 could be stabilised by immobilisation and, in combination with a biocatalyst with high hydantoinase activity, could be applied to the fully enzymatic conversion of D,L-5-HPH to D-HPG.
- Full Text:
- Date Issued: 2004
- Authors: Foster, Ingrid Margaret
- Date: 2004
- Subjects: Agrobacterium tumefaciens Amino acids Hydantoin Hydrolysis Enzymes
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3943 , http://hdl.handle.net/10962/d1004002
- Description: A calcium alginate bead-immobilised biocatalyst was developed utilising the D-hydantoinase and D-N-carbamoylase from a novel, mutant Agrobacterium tumefaciens strain RU-ORPN1. The growth conditions for the inducer-independent strain were optimised for production of hydantoinase and N-carbamoylase activities. Methods for the preparation of crude enzyme extracts were evaluated in terms of hydantoinase and N-carbamoylase activities produced. After comparison of the enzyme activities and stabilities in various extracts from fresh and frozen cells, sonication of frozen cells for 5 minutes was found to be the best method for the production of the enzyme extract. The optimal pH and temperature for the hydantoinase activity were pH 10 and 30°C, respectively, while pH 9 and 40°C were optimal for Ncarbamoylase activity. The hydantoinase activity was enhanced by the addition of Mg^(2+) ions to the enzyme extract and the N-carbamoylase was enhanced by the addition of Mg^(2+), Mn^(2+) or Zn^(2+) ions to the enzyme extract. The enzyme activities increased in the presence of ATP suggesting that the enzymes may be ATP-dependent. The addition of DTT and PMSF to the enzyme extract enhanced the hydantoinase activity but had no effect on the N-carbamoylase activity. The N-carbamoylase was unstable at 40°C and was almost completely inactivated after 24 hours incubation at this temperature. The hydantoinase and N-carbamoylase appeared to be insoluble. Various techniques were investigated for the solubilisation of the enzymes including various cell lysis methods, cell lysis at extremes of pH and ionic strength, addition of a reducing agent and protease inhibitors, and treatment with hydrolysing enzymes and detergents. Treatment with Triton X-100 was most effective for the solubilisation of the enzymes indicating that the enzymes were membrane-bound. Hydropathy and transmembrane prediction plots of the predicted amino acid sequences for two identified N-carbamoylase genes from A. tumefaciens RU-ORPN1 revealed possible transmembrane regions in the amino acid sequences, and thus supported the hypothesis that the enzymes were membrane-bound. Various methods were evaluated for the immobilisation of the enzymes in whole cells and enzyme extracts. Immobilisation of the enzyme extract in calcium alginate beads was found to be the best method in terms of enzyme activity retention and stability. The hydantoinase retained 55% activity while the N-carbamoylase exhibited a remarkable sevenfold increase in activity after immobilisation by this method. Furthermore, the hydantoinase activity increased after storage at 4°C for 21 days, while the N-carbamoylase retained 30% activity after this storage period. The calcium alginate bead-immobilised enzymes were further biochemically characterised and then applied in a bioreactor system for the production of D-hydroxyphenylglycine (D-HPG) from D,L-5-hydroxyphenylhydantoin (D,L-5-HPH). The pH and temperature optima for the immobilised hydantoinase were pH 7 and 50°C, respectively, while pH 8 and 40°C were optimal for the immobilised N-carbamoylase enzyme. The immobilised enzymes showed improved thermostability at 40°C in comparison to the free enzymes and retained high levels of activity after five repeated batch reactions. Low levels of conversion were obtained in a packed-bed bioreactor containing the A. tumefaciens RU-ORPN1 biocatalyst due to the low hydantoinase activity present in the strain, relative to N-carbamoylase. A novel, packed-bed bioreactor system was therefore developed for the production of D-HPG from D,L-5-HPH using the A. tumefaciens biocatalyst in combination with a Pseudomonas sp. biocatalyst having high hydantoinase activity. A conversion yield of 22 to 30% was achieved for the production of D-HPG from D,L-5-HPH over 5 days operation demonstrating that the hydantoin-hydrolysing enzymes from A. tumefaciens RU-ORPN1 could be stabilised by immobilisation and, in combination with a biocatalyst with high hydantoinase activity, could be applied to the fully enzymatic conversion of D,L-5-HPH to D-HPG.
- Full Text:
- Date Issued: 2004
Integrated anaerobic/aerobic bioprocess environments and the biodegradation of complex hydrocarbon wastes
- Authors: Ehlers, George A C
- Date: 2004
- Subjects: Hydrocarbons -- Biodegradation Sewage -- Purification -- Anaerobic treatment Water -- Purification -- Biological treatment Anaerobic bacteria Aerobic bacteria
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4011 , http://hdl.handle.net/10962/d1004071
- Description: An investigation of the biodegradation of complex hydrocarbon wastes, with emphasis on chlorinated aromatic compounds, in an anaerobic/aerobic bioprocess environment was made. A reactor configuration was developed consisting of linked anaerobic and aerobic reactors which served as the model for a proposed bioremediation strategy targeting subterranean soil/sediment/aquifer chlorinated phenol-contaminated environments. Here oxygen is frequently limited and sulphate is readily available, as occurs especially in marine sediment and intertidal habitats. In the anaerobic system the successful transformation and mobilization of the model contaminant, 2,4,6-trichlorophenol, was shown to rely on reductive dechlorination by a sulphate-reducing dependent dechlororespiring co-culture. This was followed in the aerobic system by degradation of the pollutant and its metabolites, 2,4-dichlorophenol, 4-chlorophenol and phenol, by immobilized white-rot fungi.The strategy was initially investigated separately in laboratory bench- and intermediate scale reactors whereafter reactors were linked to simulate the integrated biodegradation strategy. The application of the fungal reactor to treat an actual waste stream by degrading complex mixtures of hydrocarbons in a waste oil recycling effluent was also investigated. The mineralization of phenol and 2,4,6-TCP by immobilized fungal cultures was studied in pinewood chip and foam glass bead-packed trickling reactors. The reactors were operated in sequencing batch format. Removal efficiency increased over time and elevated influent phenol and TCP (800 and 85 mg.L⁻¹) concentrations were degraded by > 98 % in 24 – 30 h batch cycles. Comparable performance between the packing materials was shown. Uptake by the packing was negligible and stripping of compounds induced by aeration had a minimal effect on biodegradation efficiency. Reactor performances are discussed in relation to sequencing batch operation and nutrient requirements necessary to sustain fungal activity in inert vs. organic material packed systems. It was shown that a co-culture consisting of sulphate-reducing and dechlororespiring bacteria established in fed-batch and soil flasks, as well as pine chip-packed fluidized bed reactors. Results showed reductive dechlorination of 2,4,6-TCP to be in strict dependence on the activity of the sulphate-reducing population, sulphate and lactate concentrations. Transformation to 2,4-DCP, 4-CP and phenol was enhanced in sulphate deficient conditions. Dechlororespiring activity was found to be dependent on the fermentative activity of sulphate-reducing bacteria, and the culture was also shown to mobilize and dechlorinate TCP in soils contaminated with the pollutant. Linking the systems achieved degradation of the compound by > 99 % through fungal mineralization of metabolites produced in the dechlororespiring stage of the system. pH correction to the anaerobic reactor was found to be necessary since acidic effluent from the fungal reactor inhibited sulphate reduction and dechlorination. The fungal reactor system was evaluated at intermediate-scale using a complex waste oil recycling effluent. Substantial COD reduction (> 96 % in 48 h batch cycles) and removal of specific effluent hydrocarbon components was shown in diluted, undiluted (COD > 37 g.L⁻¹) and 2,4,6-TCP-spiked effluents. Industrial application of the fungal reactor was evaluated in a 14 m³ pilot plant operated on-site at a waste oil processing plant.
- Full Text:
- Date Issued: 2004
- Authors: Ehlers, George A C
- Date: 2004
- Subjects: Hydrocarbons -- Biodegradation Sewage -- Purification -- Anaerobic treatment Water -- Purification -- Biological treatment Anaerobic bacteria Aerobic bacteria
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4011 , http://hdl.handle.net/10962/d1004071
- Description: An investigation of the biodegradation of complex hydrocarbon wastes, with emphasis on chlorinated aromatic compounds, in an anaerobic/aerobic bioprocess environment was made. A reactor configuration was developed consisting of linked anaerobic and aerobic reactors which served as the model for a proposed bioremediation strategy targeting subterranean soil/sediment/aquifer chlorinated phenol-contaminated environments. Here oxygen is frequently limited and sulphate is readily available, as occurs especially in marine sediment and intertidal habitats. In the anaerobic system the successful transformation and mobilization of the model contaminant, 2,4,6-trichlorophenol, was shown to rely on reductive dechlorination by a sulphate-reducing dependent dechlororespiring co-culture. This was followed in the aerobic system by degradation of the pollutant and its metabolites, 2,4-dichlorophenol, 4-chlorophenol and phenol, by immobilized white-rot fungi.The strategy was initially investigated separately in laboratory bench- and intermediate scale reactors whereafter reactors were linked to simulate the integrated biodegradation strategy. The application of the fungal reactor to treat an actual waste stream by degrading complex mixtures of hydrocarbons in a waste oil recycling effluent was also investigated. The mineralization of phenol and 2,4,6-TCP by immobilized fungal cultures was studied in pinewood chip and foam glass bead-packed trickling reactors. The reactors were operated in sequencing batch format. Removal efficiency increased over time and elevated influent phenol and TCP (800 and 85 mg.L⁻¹) concentrations were degraded by > 98 % in 24 – 30 h batch cycles. Comparable performance between the packing materials was shown. Uptake by the packing was negligible and stripping of compounds induced by aeration had a minimal effect on biodegradation efficiency. Reactor performances are discussed in relation to sequencing batch operation and nutrient requirements necessary to sustain fungal activity in inert vs. organic material packed systems. It was shown that a co-culture consisting of sulphate-reducing and dechlororespiring bacteria established in fed-batch and soil flasks, as well as pine chip-packed fluidized bed reactors. Results showed reductive dechlorination of 2,4,6-TCP to be in strict dependence on the activity of the sulphate-reducing population, sulphate and lactate concentrations. Transformation to 2,4-DCP, 4-CP and phenol was enhanced in sulphate deficient conditions. Dechlororespiring activity was found to be dependent on the fermentative activity of sulphate-reducing bacteria, and the culture was also shown to mobilize and dechlorinate TCP in soils contaminated with the pollutant. Linking the systems achieved degradation of the compound by > 99 % through fungal mineralization of metabolites produced in the dechlororespiring stage of the system. pH correction to the anaerobic reactor was found to be necessary since acidic effluent from the fungal reactor inhibited sulphate reduction and dechlorination. The fungal reactor system was evaluated at intermediate-scale using a complex waste oil recycling effluent. Substantial COD reduction (> 96 % in 48 h batch cycles) and removal of specific effluent hydrocarbon components was shown in diluted, undiluted (COD > 37 g.L⁻¹) and 2,4,6-TCP-spiked effluents. Industrial application of the fungal reactor was evaluated in a 14 m³ pilot plant operated on-site at a waste oil processing plant.
- Full Text:
- Date Issued: 2004
The enzymology of enhanced hydrolysis within the biosulphidogenic recycling sludge bed reactor (RSBR)
- Authors: Enongene, Godlove Nkwelle
- Date: 2004
- Subjects: Hydrolysis , Sewage sludge , Sewage -- Purification -- Anaerobic treatment , Water -- Purification -- Biological treatment
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4132 , http://hdl.handle.net/10962/d1015744
- Description: The hydrolysis of complex organic heteropolymers contained in municipal wastewater to simpler monomers by extracellular hydrolytic enzymes is generally considered the rate-limiting step of the biodegradation process. Previous studies of the Recycling Sludge Bed Reactor (RSBR) revealed that the hydrolysis of complex particulate organics, such as those contained in primary sludge (PS), was enhanced under anaerobic biosulphidogenic conditions. Although the mechanism was not fully understood, it appeared to involve the interaction of sulfide and sludge flocs. The current study was conducted using a 3500 ml laboratory-scale RSBR fed sieved PS at a loading rate of 0.5 kg COD/m³.day and an initial chemical oxygen demand (COD) to sulfate ratio (COD:SO₄) of 1:1. There was no significant accumulation of undigested sludge in the reactor over the 60-day experimental period and the quantity of SO₄ reduced indicated that the yield of soluble products from PS was at least as high as those reported previously for this system (> 50%). In the current study, the specific activities of a range of extracellular hydrolytic enzymes (L-alanine aminopeptidase, L-leucine aminopeptidase, arylsulphatase, α-glucosidase, β- glucosidase, protease and lipase) were monitored in a sulfide gradient within a biosulphidogenic RSBR. Data obtained indicated that the specific enzymatic activities increased with the depth of the RSBR and also correlated with a number of the physicochemical parameters including sulfide, alkalinity and sulfate. The activities of α- glucosidase and β-glucosidase were higher than that of the other enzymes studied. Lipase activity was relatively low and studies conducted on the enzyme-enzyme interaction using specific enzyme inhibitors indicated that lipases were probably being digested by the proteases. Further studies to determine the impact of sulfide on the enzymes, showed an increase in the enzyme activity with increasing sulfide concentration. Possible direct affects were investigated by looking for changes in the Michaelis constant (Km) and the maximal velocity (Vmax) of the crude enzymes with varying sulfide concentrations (250, 400 and 500 mg/l) using natural and synthetic substrates. The results showed no significant difference in both the Km and the Vmax for any of the hydrolytic enzymes except for the protease. The latter showed a statistically significant increase in the Km with increasing sulfide concentration. Although this indicated a direct interaction, this difference was not large enough to be of biochemical significance and was consequently not solely responsible for the enhanced hydrolysis observed in the RSBR. Investigation into the floc characteristics indicated that the biosulphidogenic RSBR flocs were generally small in size and became more dendritic with the depth of the RSBR. Based on the above data, the previously proposed descriptive models of enhanced hydrolysis of particulate organic matter in a biosulphidogenic RSBR has been revised. It is thought that the effect of sulfide on the hydrolysis step is primarily indirect and that the reduction in floc size and alteration of the floc shape to a more dendritic form is central to the success of the process.
- Full Text:
- Date Issued: 2004
- Authors: Enongene, Godlove Nkwelle
- Date: 2004
- Subjects: Hydrolysis , Sewage sludge , Sewage -- Purification -- Anaerobic treatment , Water -- Purification -- Biological treatment
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4132 , http://hdl.handle.net/10962/d1015744
- Description: The hydrolysis of complex organic heteropolymers contained in municipal wastewater to simpler monomers by extracellular hydrolytic enzymes is generally considered the rate-limiting step of the biodegradation process. Previous studies of the Recycling Sludge Bed Reactor (RSBR) revealed that the hydrolysis of complex particulate organics, such as those contained in primary sludge (PS), was enhanced under anaerobic biosulphidogenic conditions. Although the mechanism was not fully understood, it appeared to involve the interaction of sulfide and sludge flocs. The current study was conducted using a 3500 ml laboratory-scale RSBR fed sieved PS at a loading rate of 0.5 kg COD/m³.day and an initial chemical oxygen demand (COD) to sulfate ratio (COD:SO₄) of 1:1. There was no significant accumulation of undigested sludge in the reactor over the 60-day experimental period and the quantity of SO₄ reduced indicated that the yield of soluble products from PS was at least as high as those reported previously for this system (> 50%). In the current study, the specific activities of a range of extracellular hydrolytic enzymes (L-alanine aminopeptidase, L-leucine aminopeptidase, arylsulphatase, α-glucosidase, β- glucosidase, protease and lipase) were monitored in a sulfide gradient within a biosulphidogenic RSBR. Data obtained indicated that the specific enzymatic activities increased with the depth of the RSBR and also correlated with a number of the physicochemical parameters including sulfide, alkalinity and sulfate. The activities of α- glucosidase and β-glucosidase were higher than that of the other enzymes studied. Lipase activity was relatively low and studies conducted on the enzyme-enzyme interaction using specific enzyme inhibitors indicated that lipases were probably being digested by the proteases. Further studies to determine the impact of sulfide on the enzymes, showed an increase in the enzyme activity with increasing sulfide concentration. Possible direct affects were investigated by looking for changes in the Michaelis constant (Km) and the maximal velocity (Vmax) of the crude enzymes with varying sulfide concentrations (250, 400 and 500 mg/l) using natural and synthetic substrates. The results showed no significant difference in both the Km and the Vmax for any of the hydrolytic enzymes except for the protease. The latter showed a statistically significant increase in the Km with increasing sulfide concentration. Although this indicated a direct interaction, this difference was not large enough to be of biochemical significance and was consequently not solely responsible for the enhanced hydrolysis observed in the RSBR. Investigation into the floc characteristics indicated that the biosulphidogenic RSBR flocs were generally small in size and became more dendritic with the depth of the RSBR. Based on the above data, the previously proposed descriptive models of enhanced hydrolysis of particulate organic matter in a biosulphidogenic RSBR has been revised. It is thought that the effect of sulfide on the hydrolysis step is primarily indirect and that the reduction in floc size and alteration of the floc shape to a more dendritic form is central to the success of the process.
- Full Text:
- Date Issued: 2004
An investigation of the isolation, characterisation and application of hydantoinases for the industrial production of amino acids
- Authors: Kirchmann, Shaun
- Date: 2003
- Subjects: Hydantoin Amino acids Hydrolysis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3969 , http://hdl.handle.net/10962/d1004028
- Description: This thesis describes a series of investigations into the hydantoin-hydrolysing activity of bacterial strains RU-KM1 and RU-OR, which were previously isolated for their ability to hydrolyse hydantoins to amino acids. The main aim of the study was to develop biotransformations with potential application in the production of enantiomerically pure amino acids using a bioreactor based system utilising the hydantoin hydrolysing enzymes of the two isolated microorganisms. Different substituted hydantoins may be used as substrates by these enzymes for the production of a variety of amino acids. These are not only important for amino acid production, but they may be used for production of other industrially important compounds, such as semisynthetic penicillin/ampicillin, L-aspartame (sweetener), Fluvalinate (insecticide), Enalapril (ACE inhibitor). Thus, the ability of the above-mentioned strains to hydrolyse these substrates was investigated, with the view to utilizing the maximum potential of these biocatalysts. Hydantoin conversion involves a two-step hydrolysis reaction which yields, initially, an N-carbamylamino acid intermediate, and subsequently, an amino acid. The hydantoin-hydrolysing enzymes of a Pseudomonas sp. RU-KM1, and an Agrobacterium sp. RU-OR were characterised as whole cells and in a crude extract preparation, and reaction conditions for its biocatalytic application were optimised. The optimum conditions for conversion of hydantoin to glycine were found to be 1 hour at 40 °C, with conversion yields greater than 30 % achieved. The enzymes of RU-KM1 demonstrated considerable stability, retaining 80 % of their activity after storage for 2 weeks at 4 °C. The activities of the enzymes were increased by the addition of a detergent to the extraction medium, suggesting that the enzymes might be membrane-bound. The results of the determination of the metal-dependence of the hydantoinase and N-carbamoylase of RU-KM1 suggested that these enzymes required metal ions for activity, with metal ions such as Cu[superscript (2+)], Fe[superscript (2+)], and Co[superscript (2+)] resulting in no significant change in enzyme activity, however there was an activation of the enzymes when Mn[superscript (2+)] was added to the enzymes. The stereoselectivity of the enzymes was investigated, and the results suggested that the hydantoinase was D-selective, whereas the N-carbamoylase was shown to be L-selective by other researchers. The hydantoin substrate selectivity of RU-KM1 and RU-OR was investigated, and the organisms were shown to be able to hydrolyse all of the seven substrates tested. However, there was a difference in activity levels between crude extract preparations and whole cells, with crude extracts generally showing slightly lower activity than whole cells in RU-KM1, and the whole cells or RU-OR showing the lower activity than its crude extract. Some difference was also observed in the order of preference of substrates between whole cells and crude extracts. The preferred substrate for RU-KM1 whole cells was isopropylhydantoin, whereas the crude extract preparation preferentially hydrolysed p-hydroxyphenylhydantoin, achieving 57 % and 52 % conversions respectively. RU-OR whole cells preferred methylhydantoin where as the crude extract preferred isopropylhydantoin, and showed 49 % and 51 % conversions respectively. The enzymes were characterised in terms of their temperature and pH optima, inducer requirements, and product inhibition studies. The hydantoinase of RU-KM1 was shown to be inducible with low levels of hydantoin, and thermostable upto 75 °C with its optima between 60 and 70 °C. The N-carbamoylase was shown to have its optima at 50 °C. The addition of ATP (0.5 mM), DTT (1 mM) and a protease inhibitor (2 mg.mL[superscript (-1)]) all increased the hydantoinase activity of RU-KM1 crude extract, however they had very little effect on the N-carbamoylase activity. The hydantoinase enzyme from extracts of RU-KM1 was partially purified by development of cell disruption methods using mechanical and lysing enzymes, followed by precipitation and chromatographic resolution. The results obtained showed a hydantoinase enzyme of between 48 and 66 kDa. RU-KM1 was grown under fermentation conditions using different minimal media. The activity and yields under these conditions were low. Previous attempt to grow the organism in a rich medium had resulted in an increase in biomass but no hydantoinase activity. A rich medium was developed by carbon and nitrogen optimisation and yielded biomass up to 30 g.L[superscript (-1)] dry cell weight. The hydantoinase activity was restored by nitrogen starvation in stationary phase. This resulted in high biomass with increased activity. This data is currently in press. Crude extract and whole cells were immobilised on flat sheet membranes, hollow fibre membranes and in alginate beads. Low hydantoinase activity was measured in bioreactors using membranes in different configurations. A significant increase in hydantoinase activity was measured when the crude extract was immobilised in sodium alginate, as a result of stabilisation of the N-carbamoylase. Temperature and pH optima were unaffected by the immobilisation procedure, however the durability of the enzymes increased 2-fold. Different configurations of the bioreactor were investigated, as well as a hydroxyphenylhydantoin as an alternative substrate in this study. The bioreactors showed a near 95 % conversion of the hydantoin to glycine, and a 99 % conversion using HPG. In conclusion, the hydantoin-hydrolysing enzymes of RU-KM1 have been shown to be possibly membrane associated, which is a novel finding. This study has shown that the hydantoinase of RU-KM1 is D-stereoselective, with high temperature stability. A growth medium was developed for the rapid production of active biomass. A bioreactor was developed using a single and a dual biocatalyst configuration, which was capable of hydrolysing hydantoin and monosubstituted hydantoins to produce amino acids. To our knowledge this system is the first such dual biocatalyst system reported for the production of amino acids.
- Full Text:
- Date Issued: 2003
- Authors: Kirchmann, Shaun
- Date: 2003
- Subjects: Hydantoin Amino acids Hydrolysis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3969 , http://hdl.handle.net/10962/d1004028
- Description: This thesis describes a series of investigations into the hydantoin-hydrolysing activity of bacterial strains RU-KM1 and RU-OR, which were previously isolated for their ability to hydrolyse hydantoins to amino acids. The main aim of the study was to develop biotransformations with potential application in the production of enantiomerically pure amino acids using a bioreactor based system utilising the hydantoin hydrolysing enzymes of the two isolated microorganisms. Different substituted hydantoins may be used as substrates by these enzymes for the production of a variety of amino acids. These are not only important for amino acid production, but they may be used for production of other industrially important compounds, such as semisynthetic penicillin/ampicillin, L-aspartame (sweetener), Fluvalinate (insecticide), Enalapril (ACE inhibitor). Thus, the ability of the above-mentioned strains to hydrolyse these substrates was investigated, with the view to utilizing the maximum potential of these biocatalysts. Hydantoin conversion involves a two-step hydrolysis reaction which yields, initially, an N-carbamylamino acid intermediate, and subsequently, an amino acid. The hydantoin-hydrolysing enzymes of a Pseudomonas sp. RU-KM1, and an Agrobacterium sp. RU-OR were characterised as whole cells and in a crude extract preparation, and reaction conditions for its biocatalytic application were optimised. The optimum conditions for conversion of hydantoin to glycine were found to be 1 hour at 40 °C, with conversion yields greater than 30 % achieved. The enzymes of RU-KM1 demonstrated considerable stability, retaining 80 % of their activity after storage for 2 weeks at 4 °C. The activities of the enzymes were increased by the addition of a detergent to the extraction medium, suggesting that the enzymes might be membrane-bound. The results of the determination of the metal-dependence of the hydantoinase and N-carbamoylase of RU-KM1 suggested that these enzymes required metal ions for activity, with metal ions such as Cu[superscript (2+)], Fe[superscript (2+)], and Co[superscript (2+)] resulting in no significant change in enzyme activity, however there was an activation of the enzymes when Mn[superscript (2+)] was added to the enzymes. The stereoselectivity of the enzymes was investigated, and the results suggested that the hydantoinase was D-selective, whereas the N-carbamoylase was shown to be L-selective by other researchers. The hydantoin substrate selectivity of RU-KM1 and RU-OR was investigated, and the organisms were shown to be able to hydrolyse all of the seven substrates tested. However, there was a difference in activity levels between crude extract preparations and whole cells, with crude extracts generally showing slightly lower activity than whole cells in RU-KM1, and the whole cells or RU-OR showing the lower activity than its crude extract. Some difference was also observed in the order of preference of substrates between whole cells and crude extracts. The preferred substrate for RU-KM1 whole cells was isopropylhydantoin, whereas the crude extract preparation preferentially hydrolysed p-hydroxyphenylhydantoin, achieving 57 % and 52 % conversions respectively. RU-OR whole cells preferred methylhydantoin where as the crude extract preferred isopropylhydantoin, and showed 49 % and 51 % conversions respectively. The enzymes were characterised in terms of their temperature and pH optima, inducer requirements, and product inhibition studies. The hydantoinase of RU-KM1 was shown to be inducible with low levels of hydantoin, and thermostable upto 75 °C with its optima between 60 and 70 °C. The N-carbamoylase was shown to have its optima at 50 °C. The addition of ATP (0.5 mM), DTT (1 mM) and a protease inhibitor (2 mg.mL[superscript (-1)]) all increased the hydantoinase activity of RU-KM1 crude extract, however they had very little effect on the N-carbamoylase activity. The hydantoinase enzyme from extracts of RU-KM1 was partially purified by development of cell disruption methods using mechanical and lysing enzymes, followed by precipitation and chromatographic resolution. The results obtained showed a hydantoinase enzyme of between 48 and 66 kDa. RU-KM1 was grown under fermentation conditions using different minimal media. The activity and yields under these conditions were low. Previous attempt to grow the organism in a rich medium had resulted in an increase in biomass but no hydantoinase activity. A rich medium was developed by carbon and nitrogen optimisation and yielded biomass up to 30 g.L[superscript (-1)] dry cell weight. The hydantoinase activity was restored by nitrogen starvation in stationary phase. This resulted in high biomass with increased activity. This data is currently in press. Crude extract and whole cells were immobilised on flat sheet membranes, hollow fibre membranes and in alginate beads. Low hydantoinase activity was measured in bioreactors using membranes in different configurations. A significant increase in hydantoinase activity was measured when the crude extract was immobilised in sodium alginate, as a result of stabilisation of the N-carbamoylase. Temperature and pH optima were unaffected by the immobilisation procedure, however the durability of the enzymes increased 2-fold. Different configurations of the bioreactor were investigated, as well as a hydroxyphenylhydantoin as an alternative substrate in this study. The bioreactors showed a near 95 % conversion of the hydantoin to glycine, and a 99 % conversion using HPG. In conclusion, the hydantoin-hydrolysing enzymes of RU-KM1 have been shown to be possibly membrane associated, which is a novel finding. This study has shown that the hydantoinase of RU-KM1 is D-stereoselective, with high temperature stability. A growth medium was developed for the rapid production of active biomass. A bioreactor was developed using a single and a dual biocatalyst configuration, which was capable of hydrolysing hydantoin and monosubstituted hydantoins to produce amino acids. To our knowledge this system is the first such dual biocatalyst system reported for the production of amino acids.
- Full Text:
- Date Issued: 2003
Binding and transcriptional activation by Uga3p, a zinc binuclear cluster protein of Saccharomyces cerevisiae redefining the UAS [subscript GABA] and the Uga3p binding site
- Authors: Idicula, Anu Mary
- Date: 2003
- Subjects: Saccharomyces cerevisiae GABA
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3933 , http://hdl.handle.net/10962/d1003992
- Description: Uga3p, a member of the zinc binuclear cluster transcription factor family, is required for [gamma]-aminobutyric acid-dependent transcription of the UGA genes in Saccharomyces cerevisiae. Crystallographic data of some of the protein-DNA complexes of this family reveal that members of this family bind to CGG triplets. A conserved 19-nucleotide activation element in certain UGA gene promoter regions contains a CCG-N4-CGG everted repeat, proposed to be the binding site of Uga3p, UAS[subscript GABA]. The spacer region (N4) between the CGG triplets has been suggested to be the specificity determinant for binding to UAS[subscript GABA]. The data available from the Saccharomyces genome database indicates that there are multiple repeats of -CCG-N4-CGG- regions within the genome. These transcription factors are involved in the activation of specific pathways and the question arises as to how their specificity of binding is determined. The aim of this study was to understand the binding characteristics of Uga3p to UAS[subscript GABA] and to determine the affinity and specificity of this interaction. In this study, full-length (tagged and untagged) and truncated (1-124 a.a.) Uga3p was produced in a heterologous expression system (E. coli). The interaction of Uga3p with UAS[subscript GABA] in Saccharomyces cerevisiae was characterized in terms of binding in vitro and the transcriptional activation of lacZ reporter genes in vivo. The Uga3p was capable of binding to these sites in vitro independent of exogenous GABA. Electrophoretic mobility shift assays (EMSA) of the full-length Uga3p with the wild type UAS[subscript GABA] sequences produced two distinct mobility complexes. The complexes formed in the EMSA of the full-length Uga3p were those specific to the interaction of the Uga3p to UAS[subscript GABA]. The truncated Uga3p(1-124 a.a.), which has the DNA-binding zinc cluster domain, the linker region and the putative coiled-coil domain was not functionally equivalent to the full-length protein with respect to binding in vitro because the EMSAs of the UAS[subscript GABA] with the truncated Uga3p produced indistinct complexes. EMSAs using mutant UAS[subscript GABA] sequences and heterologously-produced full-length Uga3p, demonstrated that UAS[subscript GABA] consists of two, independent Uga3p-binding sites. This work presents evidence that the two Uga3p molecules bound to UAS[subscript GABA] most likely interact with each other. Unlike other zinc cluster binding sites the Uga3p-binding site is an asymmetric site of 5’-SGCGGNWWT-3’ (S= G or C, W = A or T and N = no nucleotide or G or C). UAS[subscript GABA] is a palindrome containing the two asymmetric Uga3p-binding sites. The two-site consensus sequence required for the binding of Uga3p to the UAS[subscript GABA] is present upstream of UGA1 (region -387 to -370) and UGA4 (region -403 to -387). Furthermore, a single Uga3p-binding site was identified in the 5’ untranslated regions of UGA2 (region -219 to -211). GABA-dependent transcriptional activation by UAS[subscript GABA] in vivo could be directly correlated to a high affinity, specific interaction of two Uga3p molecules to this UAS. Binding with high affinity required the conserved sequences flanking the everted repeat. This study provided evidence that the binding pattern of Uga3p is novel compared to other zinc cluster motifs investigated, as the sequences flanking the everted repeat are important regions for recognition by Uga3p. The studies with the truncated Uga3p (1 –124 a.a.), also suggested that the regions C-terminal to the DNA-binding motif and putative coiled-coil area of this protein are important for Uga3p-specific interactions with UAS[subscript GABA]. Investigation of regions C-terminal to the zinc cluster, linker and putative coiledcoil revealed an eight-motif regulatory region similar to that in other zinc cluster proteins. This indicated that the regions C-terminal to these domains are important for the regulation and activity of these proteins. A putative seven repeat WD40-like motif was identified within this region. This putative domain has been speculated to be important for protein-protein interactions. Phosphorylation and dephosphorylation in other proteins of this class have been indicated to be important for the regulation of the activity of these proteins. The bioinformatic analysis of Uga3p revealed two possible cAMP/cGMP-dependent protein kinase phosphorylation sites, four putative protein kinase C phosphorylation motifs and four putative casein kinase II phosphorylation motifs. This study has contributed to the understanding of the nature of interactions between Uga3p and its specific UAS [subscript GABA] and how the regions flanking the everted repeat determine its specificity. The comparison of the nature of the binding of truncated and full-length Uga3p in vitro provided evidence for the role played by the full-length protein in determining this specific interaction. This evidence suggested that the in vitro binding evidence for other proteins of this family, using truncated peptides that carry the DNA-binding domain, might not reflect the true nature of interactions between the proteins of this class and their specific UASs in vivo.
- Full Text:
- Date Issued: 2003
- Authors: Idicula, Anu Mary
- Date: 2003
- Subjects: Saccharomyces cerevisiae GABA
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3933 , http://hdl.handle.net/10962/d1003992
- Description: Uga3p, a member of the zinc binuclear cluster transcription factor family, is required for [gamma]-aminobutyric acid-dependent transcription of the UGA genes in Saccharomyces cerevisiae. Crystallographic data of some of the protein-DNA complexes of this family reveal that members of this family bind to CGG triplets. A conserved 19-nucleotide activation element in certain UGA gene promoter regions contains a CCG-N4-CGG everted repeat, proposed to be the binding site of Uga3p, UAS[subscript GABA]. The spacer region (N4) between the CGG triplets has been suggested to be the specificity determinant for binding to UAS[subscript GABA]. The data available from the Saccharomyces genome database indicates that there are multiple repeats of -CCG-N4-CGG- regions within the genome. These transcription factors are involved in the activation of specific pathways and the question arises as to how their specificity of binding is determined. The aim of this study was to understand the binding characteristics of Uga3p to UAS[subscript GABA] and to determine the affinity and specificity of this interaction. In this study, full-length (tagged and untagged) and truncated (1-124 a.a.) Uga3p was produced in a heterologous expression system (E. coli). The interaction of Uga3p with UAS[subscript GABA] in Saccharomyces cerevisiae was characterized in terms of binding in vitro and the transcriptional activation of lacZ reporter genes in vivo. The Uga3p was capable of binding to these sites in vitro independent of exogenous GABA. Electrophoretic mobility shift assays (EMSA) of the full-length Uga3p with the wild type UAS[subscript GABA] sequences produced two distinct mobility complexes. The complexes formed in the EMSA of the full-length Uga3p were those specific to the interaction of the Uga3p to UAS[subscript GABA]. The truncated Uga3p(1-124 a.a.), which has the DNA-binding zinc cluster domain, the linker region and the putative coiled-coil domain was not functionally equivalent to the full-length protein with respect to binding in vitro because the EMSAs of the UAS[subscript GABA] with the truncated Uga3p produced indistinct complexes. EMSAs using mutant UAS[subscript GABA] sequences and heterologously-produced full-length Uga3p, demonstrated that UAS[subscript GABA] consists of two, independent Uga3p-binding sites. This work presents evidence that the two Uga3p molecules bound to UAS[subscript GABA] most likely interact with each other. Unlike other zinc cluster binding sites the Uga3p-binding site is an asymmetric site of 5’-SGCGGNWWT-3’ (S= G or C, W = A or T and N = no nucleotide or G or C). UAS[subscript GABA] is a palindrome containing the two asymmetric Uga3p-binding sites. The two-site consensus sequence required for the binding of Uga3p to the UAS[subscript GABA] is present upstream of UGA1 (region -387 to -370) and UGA4 (region -403 to -387). Furthermore, a single Uga3p-binding site was identified in the 5’ untranslated regions of UGA2 (region -219 to -211). GABA-dependent transcriptional activation by UAS[subscript GABA] in vivo could be directly correlated to a high affinity, specific interaction of two Uga3p molecules to this UAS. Binding with high affinity required the conserved sequences flanking the everted repeat. This study provided evidence that the binding pattern of Uga3p is novel compared to other zinc cluster motifs investigated, as the sequences flanking the everted repeat are important regions for recognition by Uga3p. The studies with the truncated Uga3p (1 –124 a.a.), also suggested that the regions C-terminal to the DNA-binding motif and putative coiled-coil area of this protein are important for Uga3p-specific interactions with UAS[subscript GABA]. Investigation of regions C-terminal to the zinc cluster, linker and putative coiledcoil revealed an eight-motif regulatory region similar to that in other zinc cluster proteins. This indicated that the regions C-terminal to these domains are important for the regulation and activity of these proteins. A putative seven repeat WD40-like motif was identified within this region. This putative domain has been speculated to be important for protein-protein interactions. Phosphorylation and dephosphorylation in other proteins of this class have been indicated to be important for the regulation of the activity of these proteins. The bioinformatic analysis of Uga3p revealed two possible cAMP/cGMP-dependent protein kinase phosphorylation sites, four putative protein kinase C phosphorylation motifs and four putative casein kinase II phosphorylation motifs. This study has contributed to the understanding of the nature of interactions between Uga3p and its specific UAS [subscript GABA] and how the regions flanking the everted repeat determine its specificity. The comparison of the nature of the binding of truncated and full-length Uga3p in vitro provided evidence for the role played by the full-length protein in determining this specific interaction. This evidence suggested that the in vitro binding evidence for other proteins of this family, using truncated peptides that carry the DNA-binding domain, might not reflect the true nature of interactions between the proteins of this class and their specific UASs in vivo.
- Full Text:
- Date Issued: 2003
Development of integrated algal ponding systems in the treatment of wine distillery wastewaters
- Authors: Dekker, Leendert Gideon
- Date: 2003
- Subjects: Sewage -- Purification -- Anaerobic treatment Wine and wine making -- Waste disposal -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4062 , http://hdl.handle.net/10962/d1004530
- Description: In South Africa, wastewater disposal in the wine and distilling industry is undergoing a profound transformation as a result of fundamental changes in regulations and license requirements. To deal with this problem conventional Waste Stabilisation Ponding systems have been used by the industry together with irrigation and evaporation disposal practises. Although effective in the evaporation and containment disposal functions, these pond systems are generally not properly designed and/or managed, resulting in overloading and, at times, the generation of seriously offensive odour problems. Preliminary studies on the feasibility of utilising the Advanced Integrated Wastewater Ponding System as a core treatment technology in winery wastewater treatment were conducted. Results indicated that specific problems had to be addressed before successful ponding treatment could be achieved. This research programme undertook an investigation of the performance of a demonstration ponding system treating household sewage, which formed the basis of the research due to limited experience reported on ponds treating wine industry wastewaters. Malfunctions identified were in correlation with the preliminary winery waste ponding survey, which included unstable fermentation pit functions and inadequate nutrient removal. Retrofitting the fermentation pit with a nylon net across the rising water column resulted in improved retention of active anaerobic sludge, especially during periods of system start-up and/or organic overloading. An investigation into nutrient removal utilising algal biomass provided a valuable contribution towards development of an independent nutrient removal system. Harvested algal biomass was passively manipulated to release polysaccharides under anoxic conditions, with subsequent use as a carbon source by denitrifying organisms. Following denitrification, the still viable algal cells were introduced into a High Rate Algal Pond raceway for photosynthetically produced alkalinity. This high pH environment resulted in induced calcium phosphate mineral formation and subsequent precipitation, as well as effective ammonia stripping from the water. Based on the novel positive research outcomes a decision was made to proceed to the construction of a pilot-scale integrated ponding system treating wastewater from a wine lees factory. The system linked the Anaerobic Baffle Reactor, for pre-treatment, with the improved Advanced Integrated Wastewater Ponding System. The potential of this system has shown that a Waste Stabilisation Ponding system can be engineered to treat wine industry wastewaters and thereby effectively reduce the organic and nutrient loads, by using low-cost retrofitted upgrading unit operations. Valuable algal biomass may also be recovered as a by-product of the treatment process.
- Full Text:
- Date Issued: 2003
- Authors: Dekker, Leendert Gideon
- Date: 2003
- Subjects: Sewage -- Purification -- Anaerobic treatment Wine and wine making -- Waste disposal -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4062 , http://hdl.handle.net/10962/d1004530
- Description: In South Africa, wastewater disposal in the wine and distilling industry is undergoing a profound transformation as a result of fundamental changes in regulations and license requirements. To deal with this problem conventional Waste Stabilisation Ponding systems have been used by the industry together with irrigation and evaporation disposal practises. Although effective in the evaporation and containment disposal functions, these pond systems are generally not properly designed and/or managed, resulting in overloading and, at times, the generation of seriously offensive odour problems. Preliminary studies on the feasibility of utilising the Advanced Integrated Wastewater Ponding System as a core treatment technology in winery wastewater treatment were conducted. Results indicated that specific problems had to be addressed before successful ponding treatment could be achieved. This research programme undertook an investigation of the performance of a demonstration ponding system treating household sewage, which formed the basis of the research due to limited experience reported on ponds treating wine industry wastewaters. Malfunctions identified were in correlation with the preliminary winery waste ponding survey, which included unstable fermentation pit functions and inadequate nutrient removal. Retrofitting the fermentation pit with a nylon net across the rising water column resulted in improved retention of active anaerobic sludge, especially during periods of system start-up and/or organic overloading. An investigation into nutrient removal utilising algal biomass provided a valuable contribution towards development of an independent nutrient removal system. Harvested algal biomass was passively manipulated to release polysaccharides under anoxic conditions, with subsequent use as a carbon source by denitrifying organisms. Following denitrification, the still viable algal cells were introduced into a High Rate Algal Pond raceway for photosynthetically produced alkalinity. This high pH environment resulted in induced calcium phosphate mineral formation and subsequent precipitation, as well as effective ammonia stripping from the water. Based on the novel positive research outcomes a decision was made to proceed to the construction of a pilot-scale integrated ponding system treating wastewater from a wine lees factory. The system linked the Anaerobic Baffle Reactor, for pre-treatment, with the improved Advanced Integrated Wastewater Ponding System. The potential of this system has shown that a Waste Stabilisation Ponding system can be engineered to treat wine industry wastewaters and thereby effectively reduce the organic and nutrient loads, by using low-cost retrofitted upgrading unit operations. Valuable algal biomass may also be recovered as a by-product of the treatment process.
- Full Text:
- Date Issued: 2003
Isolation of antigenic peptides of Cowdria ruminantium and their encoding genes using a genome-derived phage display library
- Authors: Fehrsen, Jeanni
- Date: 2003
- Subjects: Bacteriophages -- Genetics Ruminants -- Diseases Heartwater
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3920 , http://hdl.handle.net/10962/d1003979
- Description: The development of new and effective vaccines and immunodiagnostic reagents requires the characterisation of antigenically relevant proteins and their interactions with the products of the immune system. Phage display technology was investigated as a means of elucidating some of the antigenic properties of the rickettsial parasite, Cowdria ruminantium (Cowdria). Randomly fragmented gene-derived libraries have been useful in elucidating viral and other epitopes, but only limited work has been done with entire genomes. A phage display library expressing a repertoire of Cowdria peptides was constructed. It was sufficiently large to represent the organism's genome, but lacked phages displaying peptides coded for by genes containing a Pvu II restriction enzyme site, including the one coding for the major antigenic protein 1 (MAP1). This was considered advantageous since MAP1 is immunodominant and has already been well characterised. Affinity selection with antibodies against Cowdria proteins other than MAP1 allowed several antibody-reactive peptides to be isolated. These selected sequences were placed in the context of the genome by screening a lambda bacteriophage library and by comparison with Cowdria DNA sequences. Apart from showing that antigenic mimics were present in the phage display library, six open reading frames encoding putative Cowdria proteins were identified. All had similarities to, or motifs in common with, membrane proteins and are thus likely to be exposed to the host's humoral immune system. Some of the proteins identified were larger than the antigens used to elicit the antibodies used for selection, probably as a result of the presence of cross-reactive epitopes. Despite limitations experienced when extending a fragmented-gene approach for epitope location to genomes, it was possible to identify an antigenic region on MAP1 by comparison with selected mimics. In addition, binding peptide sequences were identified with two monoclonal antibodies that had been raised against non-Cowdria antigens. An epitope on the VP7 protein of bluetongue virus was identified and peptides were found that reacted with a monoclonal antibody directed against malignant catarrhal fever virus. Thus, apart from being able to identify several potentially important Cowdria epitopes and genes, the fragmented-genome library holds promise as a universal reagent for identifying useful mimics.
- Full Text:
- Date Issued: 2003
- Authors: Fehrsen, Jeanni
- Date: 2003
- Subjects: Bacteriophages -- Genetics Ruminants -- Diseases Heartwater
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3920 , http://hdl.handle.net/10962/d1003979
- Description: The development of new and effective vaccines and immunodiagnostic reagents requires the characterisation of antigenically relevant proteins and their interactions with the products of the immune system. Phage display technology was investigated as a means of elucidating some of the antigenic properties of the rickettsial parasite, Cowdria ruminantium (Cowdria). Randomly fragmented gene-derived libraries have been useful in elucidating viral and other epitopes, but only limited work has been done with entire genomes. A phage display library expressing a repertoire of Cowdria peptides was constructed. It was sufficiently large to represent the organism's genome, but lacked phages displaying peptides coded for by genes containing a Pvu II restriction enzyme site, including the one coding for the major antigenic protein 1 (MAP1). This was considered advantageous since MAP1 is immunodominant and has already been well characterised. Affinity selection with antibodies against Cowdria proteins other than MAP1 allowed several antibody-reactive peptides to be isolated. These selected sequences were placed in the context of the genome by screening a lambda bacteriophage library and by comparison with Cowdria DNA sequences. Apart from showing that antigenic mimics were present in the phage display library, six open reading frames encoding putative Cowdria proteins were identified. All had similarities to, or motifs in common with, membrane proteins and are thus likely to be exposed to the host's humoral immune system. Some of the proteins identified were larger than the antigens used to elicit the antibodies used for selection, probably as a result of the presence of cross-reactive epitopes. Despite limitations experienced when extending a fragmented-gene approach for epitope location to genomes, it was possible to identify an antigenic region on MAP1 by comparison with selected mimics. In addition, binding peptide sequences were identified with two monoclonal antibodies that had been raised against non-Cowdria antigens. An epitope on the VP7 protein of bluetongue virus was identified and peptides were found that reacted with a monoclonal antibody directed against malignant catarrhal fever virus. Thus, apart from being able to identify several potentially important Cowdria epitopes and genes, the fragmented-genome library holds promise as a universal reagent for identifying useful mimics.
- Full Text:
- Date Issued: 2003
Metallophthalocyanines as photocatalysts for transformation of chlorophenols and self-assembled monolayers for electrochemical detection of thiols and cyanides
- Authors: Ozoemena, Kenneth Ikechukwu
- Date: 2003
- Subjects: Electrochemistry Cyanides Thiols Chlorophenols Photocatalysis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4089 , http://hdl.handle.net/10962/d1007709
- Description: Photochemical properties of sulphonated phthalocyanine complexes of aluminium, zinc, tin and silicon, and octa-carboxyphthalocyanine complexes of aluminium and zinc have been investigated. These water-soluble metallophthalocyanine (MPc) complexes, especially the sulphonated aluminium and zinc phthalocyanines, were found to be good photosensitisers for the transformation of the toxic mono-, tri- and penta-chlorophenols in aqueous solutions. The efficiency of MPc sensitiser towards photo-transformation of chlorophenols depends on its effectiveness to generate singlet oxygen as well as its photostability. Octa-substituted thiol-derivatised phthalocyanine complexes of cobalt, iron and zinc were synthesized and their spectral and electrochemical properties investigated. The photochemical properties ofthe zinc phthalocyanine complexes in non-aqueous solutions were comparable to those in literature. Ultrathin films of the octasubstituted thiol-derivatised phthalocyanine complexes of cobalt, iron and zinc were, for the first time, immobilized onto gold electrodes using the self-assembling technique. Surface electrochemistry indicates that the ultrathin films are surface-confined self-assembled monolayer (SAM) species. Gold electrodes modified with the redox-active SAMs of cobalt and iron phthalocyanine complexes proved to be potential electrochemical sensors for the detection of thiols (L-cysteine, homocysteine and penicillamine) and thiocyanate in aqueous solutions (pH 4). The limits of detection for the thiols and thiocyanate were in the range of ∼ 10⁻⁷ and 10⁻⁶ mol dm⁻³, respectively. The modification process was reproducible and the modified electrodes showed good stability and, if stored in pH 4 buffer solutions, could be used for the analysis of thiols and thiocyanate for about a month without the need for recalibration. Etching of gold marred electrochemical detection of cyanide with the MPc-SAM-modified gold electrodes. Interestingly, however, kinetic and equilibria studies revealed strong interaction of octabutylthiophthalocyaninatoiron (II), FeOBTPc, with cyanide in both DMF and DMSO solutions.
- Full Text:
- Date Issued: 2003
- Authors: Ozoemena, Kenneth Ikechukwu
- Date: 2003
- Subjects: Electrochemistry Cyanides Thiols Chlorophenols Photocatalysis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4089 , http://hdl.handle.net/10962/d1007709
- Description: Photochemical properties of sulphonated phthalocyanine complexes of aluminium, zinc, tin and silicon, and octa-carboxyphthalocyanine complexes of aluminium and zinc have been investigated. These water-soluble metallophthalocyanine (MPc) complexes, especially the sulphonated aluminium and zinc phthalocyanines, were found to be good photosensitisers for the transformation of the toxic mono-, tri- and penta-chlorophenols in aqueous solutions. The efficiency of MPc sensitiser towards photo-transformation of chlorophenols depends on its effectiveness to generate singlet oxygen as well as its photostability. Octa-substituted thiol-derivatised phthalocyanine complexes of cobalt, iron and zinc were synthesized and their spectral and electrochemical properties investigated. The photochemical properties ofthe zinc phthalocyanine complexes in non-aqueous solutions were comparable to those in literature. Ultrathin films of the octasubstituted thiol-derivatised phthalocyanine complexes of cobalt, iron and zinc were, for the first time, immobilized onto gold electrodes using the self-assembling technique. Surface electrochemistry indicates that the ultrathin films are surface-confined self-assembled monolayer (SAM) species. Gold electrodes modified with the redox-active SAMs of cobalt and iron phthalocyanine complexes proved to be potential electrochemical sensors for the detection of thiols (L-cysteine, homocysteine and penicillamine) and thiocyanate in aqueous solutions (pH 4). The limits of detection for the thiols and thiocyanate were in the range of ∼ 10⁻⁷ and 10⁻⁶ mol dm⁻³, respectively. The modification process was reproducible and the modified electrodes showed good stability and, if stored in pH 4 buffer solutions, could be used for the analysis of thiols and thiocyanate for about a month without the need for recalibration. Etching of gold marred electrochemical detection of cyanide with the MPc-SAM-modified gold electrodes. Interestingly, however, kinetic and equilibria studies revealed strong interaction of octabutylthiophthalocyaninatoiron (II), FeOBTPc, with cyanide in both DMF and DMSO solutions.
- Full Text:
- Date Issued: 2003
Molecular characterization of the tetratricopeptide repeat-mediated interactions of murine stress-inducible protein 1 with major heat shock proteins
- Authors: Odunuga, Odutayo Odutola
- Date: 2003
- Subjects: Plants -- Effect of stress on Proteins -- Purification Electrophoresis Heat shock proteins
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4091 , http://hdl.handle.net/10962/d1007724
- Description: Murine stress-inducible protein 1 (mSTI1) is a co-chaperone that is homologous with the human heat shock protein 70 (Hsp70)/heat shock protein 90 (Hsp90)-organizing protein (Hop). The two proteins are homologues of the highly conserved stress-inducible protein 1 (STI1) family of co-chaperones. The STI1 proteins interact directly and simultaneously at some stage, with Hsp70 and Hsp90 in the formation of the hetero-multi-chaperone complexes that facilitate the folding of signal transducing kinases and functional maturation of steroid hormone receptors. The interactions of mSTI1 with both Hsp70 and Hsp90 is mediated by a versatile structural protein-protein interaction motif, the tetratricopeptide repeat (TPR). The TPR motif is a degenerate 34-amino acid sequence a-helical structural motif found in a significant number of functionally unrelated proteins. This study was aimed at characterizing the structural and functional determinants in the TPR domains of mSTI1 responsible for binding to and discriminating between Hsp70 and Hsp90. Guided by data from Hop's crystal structures and amino acid sequence alignment analyses, various biochemical techniques were used to both qualitatively and quantitatively characterize the contacts necessary for the N-terminal TPR domain (TPR1) of mSTI1 to bind to the C-terminal EEVD motif of heat shock cognate protein 70 (Hsc70) and to discriminate between Hsc70 and Hsp90. Substitutions in the first TPR motif of Lys⁸ or Asn¹² did not affect binding of mSTI1 to Hsc70, while double substitution of these residues abrogated binding. A substitution in the second TPR motif of Asn⁴³ lowered but did not abrogate binding. Similarly, a deletion in the second TPR motif coupled with a substitution of Lys⁸ or Asn¹² reduced but did not abrogate binding. Steady state fluorescence and circular dichroism spectroscopies revealed that the double substitution of Lys⁸ and Asn¹² resulted in perturbations of inter-domain interactions in mSTl1. Together these results suggest that mSTI1-Hsc70 interaction requires a network of electrostatic interactions not only between charged residues in the TPR1 domain of mSTI1 and the EEVD motif of Hsc70, but also outside the TPR1 domain. It is proposed that the electrostatic interactions in the first TPR motif collectively made by Lys⁸ and Asn¹² define part of the minimum interactions required for successful mSTI1-Hsc70 interaction. In the first central TPR domain (TPR1A), single substitution of Lys³°¹ was sufficient to abrogate the mSTI1-Hsp90 interaction. Using a truncated derivative of mSTI1 incapable of binding to Hsp90, residues predicted by crystallographic data to determine Hsp70 binding specificity were substituted in the TPR1 domain. The modified protein had reduced binding to Hsc70, but showed significant binding capacity for Hsp90. In contrast, topologically equivalent substitutions on a truncated derivative of mSTI1 incapable of binding to Hsc70 did not confer Hsc70 specificity on the TPR2A domain. These data suggest that binding of Hsc70 to the TPR1 domain is more specific than binding of Hsp90 to the TPR2A domain. In addition, residues C-terminal of helix A in the second TPR motif of mSTI1 were shown to be important in determining specific binding to Hsc70. Binding assays using surface plasmon resonance spectroscopy showed that the affinities of binding of mSTI1 to Hsc70 and Hsp90 were 2 μM and 1.5 μM respectively. Preliminary in vivo studies revealed differences in the dynamics of binding of endogenous and exogenous recombinant mSTI1 with Hsc70 and Hsp90. The outcome of this study poses serious implications for the mechanisms of mSTI1 interactions with Hsc70 and Hsp90 in the cell.
- Full Text:
- Date Issued: 2003
- Authors: Odunuga, Odutayo Odutola
- Date: 2003
- Subjects: Plants -- Effect of stress on Proteins -- Purification Electrophoresis Heat shock proteins
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4091 , http://hdl.handle.net/10962/d1007724
- Description: Murine stress-inducible protein 1 (mSTI1) is a co-chaperone that is homologous with the human heat shock protein 70 (Hsp70)/heat shock protein 90 (Hsp90)-organizing protein (Hop). The two proteins are homologues of the highly conserved stress-inducible protein 1 (STI1) family of co-chaperones. The STI1 proteins interact directly and simultaneously at some stage, with Hsp70 and Hsp90 in the formation of the hetero-multi-chaperone complexes that facilitate the folding of signal transducing kinases and functional maturation of steroid hormone receptors. The interactions of mSTI1 with both Hsp70 and Hsp90 is mediated by a versatile structural protein-protein interaction motif, the tetratricopeptide repeat (TPR). The TPR motif is a degenerate 34-amino acid sequence a-helical structural motif found in a significant number of functionally unrelated proteins. This study was aimed at characterizing the structural and functional determinants in the TPR domains of mSTI1 responsible for binding to and discriminating between Hsp70 and Hsp90. Guided by data from Hop's crystal structures and amino acid sequence alignment analyses, various biochemical techniques were used to both qualitatively and quantitatively characterize the contacts necessary for the N-terminal TPR domain (TPR1) of mSTI1 to bind to the C-terminal EEVD motif of heat shock cognate protein 70 (Hsc70) and to discriminate between Hsc70 and Hsp90. Substitutions in the first TPR motif of Lys⁸ or Asn¹² did not affect binding of mSTI1 to Hsc70, while double substitution of these residues abrogated binding. A substitution in the second TPR motif of Asn⁴³ lowered but did not abrogate binding. Similarly, a deletion in the second TPR motif coupled with a substitution of Lys⁸ or Asn¹² reduced but did not abrogate binding. Steady state fluorescence and circular dichroism spectroscopies revealed that the double substitution of Lys⁸ and Asn¹² resulted in perturbations of inter-domain interactions in mSTl1. Together these results suggest that mSTI1-Hsc70 interaction requires a network of electrostatic interactions not only between charged residues in the TPR1 domain of mSTI1 and the EEVD motif of Hsc70, but also outside the TPR1 domain. It is proposed that the electrostatic interactions in the first TPR motif collectively made by Lys⁸ and Asn¹² define part of the minimum interactions required for successful mSTI1-Hsc70 interaction. In the first central TPR domain (TPR1A), single substitution of Lys³°¹ was sufficient to abrogate the mSTI1-Hsp90 interaction. Using a truncated derivative of mSTI1 incapable of binding to Hsp90, residues predicted by crystallographic data to determine Hsp70 binding specificity were substituted in the TPR1 domain. The modified protein had reduced binding to Hsc70, but showed significant binding capacity for Hsp90. In contrast, topologically equivalent substitutions on a truncated derivative of mSTI1 incapable of binding to Hsc70 did not confer Hsc70 specificity on the TPR2A domain. These data suggest that binding of Hsc70 to the TPR1 domain is more specific than binding of Hsp90 to the TPR2A domain. In addition, residues C-terminal of helix A in the second TPR motif of mSTI1 were shown to be important in determining specific binding to Hsc70. Binding assays using surface plasmon resonance spectroscopy showed that the affinities of binding of mSTI1 to Hsc70 and Hsp90 were 2 μM and 1.5 μM respectively. Preliminary in vivo studies revealed differences in the dynamics of binding of endogenous and exogenous recombinant mSTI1 with Hsc70 and Hsp90. The outcome of this study poses serious implications for the mechanisms of mSTI1 interactions with Hsc70 and Hsp90 in the cell.
- Full Text:
- Date Issued: 2003
The development and evaluation of Cryptophlebia Leucotreta granulovirus (CrleGV) as a biological control agent for the management of false codling moth, Cryptophlebia Leucotreta, on citrus
- Authors: Moore, Sean Douglas
- Date: 2003
- Subjects: Cryptophlebia leucotreta Cryptophlebia leucotreta -- Control Pests -- Biological control Citrus -- Diseases and pests
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3942 , http://hdl.handle.net/10962/d1004001
- Description: A granulovirus isolated from Cryptophlebia leucotreta larvae was shown through restriction endonuclease analysis to be a novel strain (CrleGV-SA). No more than one isolate could be identified from a laboratory culture of C. leucotreta. However, a preliminary examination of restricted DNA profiles of isolates from different geographical regions indicated some minor differences. In surface dose bioassays on artificial diet, LC50 and LC90 values with neonate larvae were estimated to be 4.095 x 103 OBs/ml and 1.185 x 105 OBs/ml respectively. LT50 and LT90 values with neonate larvae were estimated to be 4 days 22 h and 7 days 8 h, respectively. Detached fruit (navel orange) bioassays with neonate larvae indicated that virus concentrations that are likely to be effective in the field range from 1.08 x 107 to 3.819 x 1010 OBs/ml. In surface dose bioassays with fifth instar larvae LC50 and LC90 values were estimated to be 2.678 x 107 OBs/ml and 9.118 x 109 OBs/ml respectively. LT50 and LT90 values were estimated to be 7 days 17 h and 9 days 8 h, respectively. A new artificial diet for mass rearing the host was developed. Microbial contamination of diet was significantly reduced by adding nipagin and sorbic acid to the diet and by surface sterilising C. leucotreta eggs with Sporekill. Almost 20 % more eggs were produced from moths reared on the new diet compared to moths reared on the old diet. A further 9 % improvement in egg production and a reduction in the labour required to produce eggs, was made with the development of a new oviposition cage attached to the moth eclosion box. Virus was mass produced in fifth instar C. leucotreta larvae by surface inoculating diet with the LC90. When 300 individuals were placed onto inoculated diet, 56 % of them were recovered six to 11 days later as infected larvae. Mean larval equivalents was 1.158 x 1011 OBs/larva. When larvae and diet were harvested together, highest yields of virus were achieved at eight days after inoculation. Microbial contamination in semi-purified preparations of CrleGV ranged from 176211 to 433594 (OB:CFU ratio). Half-life of CrleGV in the field was estimated to be less than 1 day on the northern aspect of trees and between 3 - 6 days on the southern aspect. Original activity remaining (OAR) of the virus dropped below 50 % after 5 days on the northern aspect of trees and was still at 69 % on the southern aspect of trees after 3 weeks. In field trials, CrleGV reduced C. leucotreta infestation of navel oranges by up to 60 % for a period of 39 days. CrleGV in combination with augmentation of the C. leucotreta egg parasitoid, Trichogrammatoidea cryptophlebiae, reduced infestation by 70 %. The integration of CrleGV into an integrated pest management (IPM) system for the management of C. leucotreta on citrus is proposed.
- Full Text:
- Date Issued: 2003
- Authors: Moore, Sean Douglas
- Date: 2003
- Subjects: Cryptophlebia leucotreta Cryptophlebia leucotreta -- Control Pests -- Biological control Citrus -- Diseases and pests
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3942 , http://hdl.handle.net/10962/d1004001
- Description: A granulovirus isolated from Cryptophlebia leucotreta larvae was shown through restriction endonuclease analysis to be a novel strain (CrleGV-SA). No more than one isolate could be identified from a laboratory culture of C. leucotreta. However, a preliminary examination of restricted DNA profiles of isolates from different geographical regions indicated some minor differences. In surface dose bioassays on artificial diet, LC50 and LC90 values with neonate larvae were estimated to be 4.095 x 103 OBs/ml and 1.185 x 105 OBs/ml respectively. LT50 and LT90 values with neonate larvae were estimated to be 4 days 22 h and 7 days 8 h, respectively. Detached fruit (navel orange) bioassays with neonate larvae indicated that virus concentrations that are likely to be effective in the field range from 1.08 x 107 to 3.819 x 1010 OBs/ml. In surface dose bioassays with fifth instar larvae LC50 and LC90 values were estimated to be 2.678 x 107 OBs/ml and 9.118 x 109 OBs/ml respectively. LT50 and LT90 values were estimated to be 7 days 17 h and 9 days 8 h, respectively. A new artificial diet for mass rearing the host was developed. Microbial contamination of diet was significantly reduced by adding nipagin and sorbic acid to the diet and by surface sterilising C. leucotreta eggs with Sporekill. Almost 20 % more eggs were produced from moths reared on the new diet compared to moths reared on the old diet. A further 9 % improvement in egg production and a reduction in the labour required to produce eggs, was made with the development of a new oviposition cage attached to the moth eclosion box. Virus was mass produced in fifth instar C. leucotreta larvae by surface inoculating diet with the LC90. When 300 individuals were placed onto inoculated diet, 56 % of them were recovered six to 11 days later as infected larvae. Mean larval equivalents was 1.158 x 1011 OBs/larva. When larvae and diet were harvested together, highest yields of virus were achieved at eight days after inoculation. Microbial contamination in semi-purified preparations of CrleGV ranged from 176211 to 433594 (OB:CFU ratio). Half-life of CrleGV in the field was estimated to be less than 1 day on the northern aspect of trees and between 3 - 6 days on the southern aspect. Original activity remaining (OAR) of the virus dropped below 50 % after 5 days on the northern aspect of trees and was still at 69 % on the southern aspect of trees after 3 weeks. In field trials, CrleGV reduced C. leucotreta infestation of navel oranges by up to 60 % for a period of 39 days. CrleGV in combination with augmentation of the C. leucotreta egg parasitoid, Trichogrammatoidea cryptophlebiae, reduced infestation by 70 %. The integration of CrleGV into an integrated pest management (IPM) system for the management of C. leucotreta on citrus is proposed.
- Full Text:
- Date Issued: 2003
The phosphorylation and nuclear localization of the co-chaperone murine stress-inducible protein 1
- Authors: Longshaw, Victoria Mary
- Date: 2003
- Subjects: Phosphorylation Proteins Heat shock proteins
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3979 , http://hdl.handle.net/10962/d1004038
- Description: The co-chaperone murine stress-inducible protein 1 (mSTI1), a heat shock protein 70 (Hsp70)/ heat shock protein 90 (Hsp90) organizing protein (Hop) homologue, mediates the assembly of the Hsp70/Hsp90 chaperone heterocomplex. mSTI1 is phosphorylated in vitro by cell cycle kinases, proximal to a putative nuclear localization signal (NLS), substantiating a predicted CKII-cdc2-NLS (CcN) motif at position 189-239. Stable transfectants of NIH 3T3 fibroblasts that expressed mSTI1-EGFP, NLSmSTI1-EGFP and EGFP, were prepared. Fluorescence microscopy revealed mSTI1 was cytoplasmically localized, and that this localization was not affected by the fusion of mSTI1 with the EGFP moiety. NLSmSTI1-EGFP was targeted to the nucleus compared to EGFP, suggesting that the NLSmSTI1 was a functional NLS. The localization of mSTI1 was determined under normal and heat shock conditions, inhibition of nuclear export (leptomycin B), inhibition of CKII 5,6-dichlorobenzimidazole riboside, DRB), inhibition of cdc2 kinase (olomoucine), and G1/S phase arrest (hydroxyurea). mSTI1-EGFP and mSTI1 were excluded from the nucleus in the majority of resting cells, but accumulated in the nucleus following leptomycin B treatment, implying that mSTI1 possibly undergoes a functional import process, and export via the chromosomal region maintenance 1 (CRM-1)-mediated export pathway. Hydroxyurea and olomoucine (but not DRB or heat shock) treatment increased the proportion of cells in which mSTI1-EGFP exhibited cytoplasmic and nuclear localization. 2D gel electrophoresis detected three endogenous mSTI1 isoforms, which changed following hydroxyurea treatment. Furthermore, point inactivation and mimicking of phosphorylatable residues in mSTI1 altered the translocation of the protein and the isoform composition. Modification of mSTI1 at S189 and T198 decreased the number of isoforms of mSTI1-EGFP, suggesting that the protein is modified at these sites in vivo. The removal of the in vitro cdc2 kinase site at T198 promoted a nuclear localization during G1/S phase arrest. Therefore active cdc2 kinase, but not CKII, may be required for cytoplasmic localization of mSTI1. The CKII site appears to have no regulatory role under heat shock conditions or during the cell cycle. In vitro phosphorylation studies on untagged mSTI1 further supported the prediction that S189 is the only site recognised by CKII. The cdc2 kinase site at T198, however, although the major site, was not the only site phosphorylated in vitro. However, mSTI1 and cdc2 kinase did not interact in a detectable stable complex. Bioinformatic analysis of mSTI1 revealed NLS residues were conserved in STI1 proteins, and the NLS and TPR2A motifs were in close proximity. This may have mechanistic implications for the formation of the Hsp90-mSTI1 heterocomplex. The cytoplasmic or nuclear localization of mSTI1 is predicted to be the result of a dynamic equilibrium between nuclear import and nuclear export, the fulcrum of which may be shifted under different cell cycle conditions. These data provide the first evidence of regulated nuclear import/export of a major Hsp70/Hsp90 co-chaperone, and the regulation of this nuclear import by cell cycle status and cell cycle kinases.
- Full Text:
- Date Issued: 2003
- Authors: Longshaw, Victoria Mary
- Date: 2003
- Subjects: Phosphorylation Proteins Heat shock proteins
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3979 , http://hdl.handle.net/10962/d1004038
- Description: The co-chaperone murine stress-inducible protein 1 (mSTI1), a heat shock protein 70 (Hsp70)/ heat shock protein 90 (Hsp90) organizing protein (Hop) homologue, mediates the assembly of the Hsp70/Hsp90 chaperone heterocomplex. mSTI1 is phosphorylated in vitro by cell cycle kinases, proximal to a putative nuclear localization signal (NLS), substantiating a predicted CKII-cdc2-NLS (CcN) motif at position 189-239. Stable transfectants of NIH 3T3 fibroblasts that expressed mSTI1-EGFP, NLSmSTI1-EGFP and EGFP, were prepared. Fluorescence microscopy revealed mSTI1 was cytoplasmically localized, and that this localization was not affected by the fusion of mSTI1 with the EGFP moiety. NLSmSTI1-EGFP was targeted to the nucleus compared to EGFP, suggesting that the NLSmSTI1 was a functional NLS. The localization of mSTI1 was determined under normal and heat shock conditions, inhibition of nuclear export (leptomycin B), inhibition of CKII 5,6-dichlorobenzimidazole riboside, DRB), inhibition of cdc2 kinase (olomoucine), and G1/S phase arrest (hydroxyurea). mSTI1-EGFP and mSTI1 were excluded from the nucleus in the majority of resting cells, but accumulated in the nucleus following leptomycin B treatment, implying that mSTI1 possibly undergoes a functional import process, and export via the chromosomal region maintenance 1 (CRM-1)-mediated export pathway. Hydroxyurea and olomoucine (but not DRB or heat shock) treatment increased the proportion of cells in which mSTI1-EGFP exhibited cytoplasmic and nuclear localization. 2D gel electrophoresis detected three endogenous mSTI1 isoforms, which changed following hydroxyurea treatment. Furthermore, point inactivation and mimicking of phosphorylatable residues in mSTI1 altered the translocation of the protein and the isoform composition. Modification of mSTI1 at S189 and T198 decreased the number of isoforms of mSTI1-EGFP, suggesting that the protein is modified at these sites in vivo. The removal of the in vitro cdc2 kinase site at T198 promoted a nuclear localization during G1/S phase arrest. Therefore active cdc2 kinase, but not CKII, may be required for cytoplasmic localization of mSTI1. The CKII site appears to have no regulatory role under heat shock conditions or during the cell cycle. In vitro phosphorylation studies on untagged mSTI1 further supported the prediction that S189 is the only site recognised by CKII. The cdc2 kinase site at T198, however, although the major site, was not the only site phosphorylated in vitro. However, mSTI1 and cdc2 kinase did not interact in a detectable stable complex. Bioinformatic analysis of mSTI1 revealed NLS residues were conserved in STI1 proteins, and the NLS and TPR2A motifs were in close proximity. This may have mechanistic implications for the formation of the Hsp90-mSTI1 heterocomplex. The cytoplasmic or nuclear localization of mSTI1 is predicted to be the result of a dynamic equilibrium between nuclear import and nuclear export, the fulcrum of which may be shifted under different cell cycle conditions. These data provide the first evidence of regulated nuclear import/export of a major Hsp70/Hsp90 co-chaperone, and the regulation of this nuclear import by cell cycle status and cell cycle kinases.
- Full Text:
- Date Issued: 2003