A bioinorganic study of some cobalt(II) Schiff base complexes of variously substituted hydroxybenzaldimines
- Authors: Shaibu, Rafiu Olarewaju
- Date: 2008
- Subjects: Cobalt Schiff bases Artemia Spectrum analysis Ligands -- Analysis Bioinorganic chemistry Antineoplastic agents Cancer -- Chemotherapy Ligands -- Toxicity
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4394 , http://hdl.handle.net/10962/d1006009
- Description: Syntheses of Schiff bases were carried out by reacting salicylaldyhde, ortho-vanillin, para-vanillin or vanillin with aniline, 1-aminonaphthalene, 4- and 3-aminopyridine, and also with 2- and 3-aminomethylpyridine. The various Schiff bases obtained from the condensation reaction were reacted with CoCl₂.6H₂0, triethylamine stripped CoCl₂.6H₂0 or Co(CH₃COO)₂ to form cobalt(Il) complexes of ratio 2:1. The complexes obtained from cobalt chloride designated as the "A series" are of the general formulae ML₂X₂.nH₂0 , (L = Schiff base, X = chlorine) while those obtained from cobalt acetate or triethylamine stripped cobalt chloride denoted as "B" and C" are of the general formulae ML₂. nH₂0. The few complexes that do not follow the general formulae highlighted above are: IA [M(HL)₃.Cl₂], (L = N-phenylsalicylaldimine), 4A = (MLCl₂), (L = N-phenylvanaldiminato), 7 A and 21 A (ML₂), (L = N-naphthyl-o-vanaldiminato, and N-methy-2-pyridylsalicylaldiminato respectively), 8A = MLCI, (L = N-naphthylvanaldiminato), 12A = M₂L₃Cl₂, (L = N-4-pyridylvanaldiminato), 15A (MLCI), (L = N-3-pyridyl-o-vanaldiminato). The ligands and their complexes were characterized using elemental analyses and cobalt analysis using ICP, FT-IR spectroscopy (mid and far-IR), NIR-UV/vis (diffuse reflectance), UV/vis in an aprotic and a protic solvents, while mass spectrometry, ¹HNMR and ¹³CNMR, was used to further characterized the ligands. The tautomeric nature of the Schiff bases were determined by examining the behaviour of Schiff bases and their complexes in a protic (e.g. MeOH) and non-protic (e.g. DMF) polar solvents. The effects of solvents on the electronic behaviour of the compounds were also examined. Using CDCl₃, the NMR technique was further used to confirm the structures of the Schiff bases. The tentative geometry of the complexes was determined using the spectra information obtained from the far infrared and the diffuse reflectance spectroscopy. With few exceptions, most of the "A" series are tetrahedral or distorted tetrahedral, while the "B + C" are octahedral or pseudooctahedral. A small number of complexes are assigned square-planar geometry owing to the characteristic spectral behaviour shown. In order to determine their biological activity, two biological assay methods (antimicrobial testing and brine shrimp lethality assay) were used. Using disc method, the bacteriostatic and fungicidal activities of the various Schiff bases and their respective complexes to Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa as well as Aspergillus niger, were measured and the average inhibition zones are tabulated and analysed. Both the Schiff bases and their complexes showed varying bacteriostatic and fungicidal activity against the bacteria and fungus tested. The inhibition activity is concentration dependent and potential antibiotic and fungicides are identified. To determine the toxicity of the ligands and their corresponding cobalt(II) complexes, brine shrimp lethality assay was used. The LD₅₀ of the tested compounds were calculated and the results obtained were tabulated for comparison.
- Full Text:
- Date Issued: 2008
- Authors: Shaibu, Rafiu Olarewaju
- Date: 2008
- Subjects: Cobalt Schiff bases Artemia Spectrum analysis Ligands -- Analysis Bioinorganic chemistry Antineoplastic agents Cancer -- Chemotherapy Ligands -- Toxicity
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4394 , http://hdl.handle.net/10962/d1006009
- Description: Syntheses of Schiff bases were carried out by reacting salicylaldyhde, ortho-vanillin, para-vanillin or vanillin with aniline, 1-aminonaphthalene, 4- and 3-aminopyridine, and also with 2- and 3-aminomethylpyridine. The various Schiff bases obtained from the condensation reaction were reacted with CoCl₂.6H₂0, triethylamine stripped CoCl₂.6H₂0 or Co(CH₃COO)₂ to form cobalt(Il) complexes of ratio 2:1. The complexes obtained from cobalt chloride designated as the "A series" are of the general formulae ML₂X₂.nH₂0 , (L = Schiff base, X = chlorine) while those obtained from cobalt acetate or triethylamine stripped cobalt chloride denoted as "B" and C" are of the general formulae ML₂. nH₂0. The few complexes that do not follow the general formulae highlighted above are: IA [M(HL)₃.Cl₂], (L = N-phenylsalicylaldimine), 4A = (MLCl₂), (L = N-phenylvanaldiminato), 7 A and 21 A (ML₂), (L = N-naphthyl-o-vanaldiminato, and N-methy-2-pyridylsalicylaldiminato respectively), 8A = MLCI, (L = N-naphthylvanaldiminato), 12A = M₂L₃Cl₂, (L = N-4-pyridylvanaldiminato), 15A (MLCI), (L = N-3-pyridyl-o-vanaldiminato). The ligands and their complexes were characterized using elemental analyses and cobalt analysis using ICP, FT-IR spectroscopy (mid and far-IR), NIR-UV/vis (diffuse reflectance), UV/vis in an aprotic and a protic solvents, while mass spectrometry, ¹HNMR and ¹³CNMR, was used to further characterized the ligands. The tautomeric nature of the Schiff bases were determined by examining the behaviour of Schiff bases and their complexes in a protic (e.g. MeOH) and non-protic (e.g. DMF) polar solvents. The effects of solvents on the electronic behaviour of the compounds were also examined. Using CDCl₃, the NMR technique was further used to confirm the structures of the Schiff bases. The tentative geometry of the complexes was determined using the spectra information obtained from the far infrared and the diffuse reflectance spectroscopy. With few exceptions, most of the "A" series are tetrahedral or distorted tetrahedral, while the "B + C" are octahedral or pseudooctahedral. A small number of complexes are assigned square-planar geometry owing to the characteristic spectral behaviour shown. In order to determine their biological activity, two biological assay methods (antimicrobial testing and brine shrimp lethality assay) were used. Using disc method, the bacteriostatic and fungicidal activities of the various Schiff bases and their respective complexes to Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa as well as Aspergillus niger, were measured and the average inhibition zones are tabulated and analysed. Both the Schiff bases and their complexes showed varying bacteriostatic and fungicidal activity against the bacteria and fungus tested. The inhibition activity is concentration dependent and potential antibiotic and fungicides are identified. To determine the toxicity of the ligands and their corresponding cobalt(II) complexes, brine shrimp lethality assay was used. The LD₅₀ of the tested compounds were calculated and the results obtained were tabulated for comparison.
- Full Text:
- Date Issued: 2008
ATP mimics as glutamine synthetase inhibitors : an exploratory synthetic study
- Authors: Salisu, Sheriff Tomilola
- Date: 2008
- Subjects: Glutamine synthetase Tuberculosis -- Treatment Tuberculosis -- Chemotherapy Adenosine triphosphate Adenosine triphosphate -- Synthesis Drug development
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4408 , http://hdl.handle.net/10962/d1006715
- Description: Using a mechanism-based approach to drug discovery, efforts have been directed towards developing novel ATP mimics that can act as GS inhibitors. The purine-based systems, adenosine, adenine and allopurinol, were identified as possible scaffolds for potential ATP mimics, while various meta-disubstituted benzenoid compounds, 3-aminobenzonitrile, 3-aminophenol, resorcinol, 3-aminobenzyl alcohol, 3-hydroxybenzoic acid and 3-aminobenzoic acid have been explored as adenine analogues. These compounds were treated with different alkylating and acylating agents. Allylation of all the substrates was achieved using allyl bromide and N-9 alkylation of protected allopurinol was effected using a number of specially prepared Baylis-Hillman adducts. Acylation of the benzenoid precursors with chloroacetyl chloride, acetoxyacetyl chloride, acryloyl chloride and specially prepared 2,3,4,5,6-pentaacetylgluconoyl chloride afforded the corresponding mono- and /or diacylated products in varying yields (4-96%). Elaboration of the alkylated and acylated products has involved the reaction of hydroxy systems with diethyl chloro phosphate and chloro derivatives with triethyl phosphite in Arbuzov-type reactions to afford phosphorylated products. In all cases, products were fully characterized using 1- and 2-D NMR analysis and, where appropriate, high-resolution mass spectrometry. The application of Modgraph and ChemWindow NMR prediction programmes has been explored and the resulting data have been compared with experimental chemical shift assignments to confirm chemical structures and, in some cases, to establish the position of allylation or acylation. Experimental assignments were found to be generally comparable with the Modgraph data, but not always with the ChemWindow values. The docking of selected products in the 'active-site' of GS and their structural homology with ATP, both in their free and bound conformations have been studied using the ACCELERYS Cerius² platform. All the selected ATP mimics exhibit some form of interaction with the 'active-site' residues, and a number of them appear to be promising GS ligands.
- Full Text:
- Date Issued: 2008
- Authors: Salisu, Sheriff Tomilola
- Date: 2008
- Subjects: Glutamine synthetase Tuberculosis -- Treatment Tuberculosis -- Chemotherapy Adenosine triphosphate Adenosine triphosphate -- Synthesis Drug development
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4408 , http://hdl.handle.net/10962/d1006715
- Description: Using a mechanism-based approach to drug discovery, efforts have been directed towards developing novel ATP mimics that can act as GS inhibitors. The purine-based systems, adenosine, adenine and allopurinol, were identified as possible scaffolds for potential ATP mimics, while various meta-disubstituted benzenoid compounds, 3-aminobenzonitrile, 3-aminophenol, resorcinol, 3-aminobenzyl alcohol, 3-hydroxybenzoic acid and 3-aminobenzoic acid have been explored as adenine analogues. These compounds were treated with different alkylating and acylating agents. Allylation of all the substrates was achieved using allyl bromide and N-9 alkylation of protected allopurinol was effected using a number of specially prepared Baylis-Hillman adducts. Acylation of the benzenoid precursors with chloroacetyl chloride, acetoxyacetyl chloride, acryloyl chloride and specially prepared 2,3,4,5,6-pentaacetylgluconoyl chloride afforded the corresponding mono- and /or diacylated products in varying yields (4-96%). Elaboration of the alkylated and acylated products has involved the reaction of hydroxy systems with diethyl chloro phosphate and chloro derivatives with triethyl phosphite in Arbuzov-type reactions to afford phosphorylated products. In all cases, products were fully characterized using 1- and 2-D NMR analysis and, where appropriate, high-resolution mass spectrometry. The application of Modgraph and ChemWindow NMR prediction programmes has been explored and the resulting data have been compared with experimental chemical shift assignments to confirm chemical structures and, in some cases, to establish the position of allylation or acylation. Experimental assignments were found to be generally comparable with the Modgraph data, but not always with the ChemWindow values. The docking of selected products in the 'active-site' of GS and their structural homology with ATP, both in their free and bound conformations have been studied using the ACCELERYS Cerius² platform. All the selected ATP mimics exhibit some form of interaction with the 'active-site' residues, and a number of them appear to be promising GS ligands.
- Full Text:
- Date Issued: 2008
Camphor derivatives in asymmetric synthesis: a synthetic, mechanistic and theoretical study
- Authors: Lobb, Kevin Alan
- Date: 2008
- Subjects: Chemistry, Organic -- Research Esters Organic compounds -- Synthesis Alkylation Chemical reactions -- Computer simulation Chemical kinetics Camphor Cinnamomum
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4414 , http://hdl.handle.net/10962/d1006770
- Description: A series of 3,3-ethylenedioxy-exo- and endo- bornyl esters have been prepared and subjected to α-benzylation using lithium diisopropylamide and benzyl bromide. In the exo-series of esters the diastereofacial selectivity of benzylation was found to improve (up to 34% d.e.) as the steric bulk of the O-alkyl group increased, whereas in the endo-series, a surprising decrease in stereoselectivity was observed as the steric bulk increased – an observation attributed to flexibility of the metal-coordinated endo-enolate system, compared to the relative rigidity of the exo analogues. The conformational options for each series was explored at the density functional theory level. Reductive cyclization of a range of specially prepared N-carbobenzyloxy-amino acid esters has been shown to afford the corresponding derivatives, contrary to previous reports that the cyclization is limited to the glycine derivative. The cyclization sequence has been explored in detail, and the yield has been shown to be critically dependent on the stereochemistry of the α-amino acid moiety. Moreover, it seems that reductive cyclization occurs more readily with the endo- rather than the exo-bornyl N-CBZ-amino acid esters. Molecular modelling of relevant transition states at the DFT levels indicates that L-amino acid-derived systems should cyclize preferably in the exo-series and D-amino acid-derived systems should cyclize preferably in the endo series. Studies of alkylation of an iminolactone system have reported an interesting anomaly - exo-methylation is observed while endo-alkylation predominates for larger alkyl groups. This has been studied in detail at the DFT level, and the anomaly is attributed to thermodynamic control in the methyl case, whereas kinetic control is the norm in this system. Preliminary computer modelling of the intramolecular rearrangement of a 3,3-xylylbornyl system at the HF/STO-3G level raised doubts concerning the structure assigned by Evans to one of the rearrangement products, prompting an X-ray crystallographic analysis and leading to the revision of its structure from a pinene to a camphene derivative. The previously elusive spiro[bornane-3,2’-indan]-2-exo-tosylate has been successfully isolated, and the kinetics of its ready decomposition to the two camphene products has been followed by 1H NMR spectroscopy. The endo-tosylate analogue, on the other hand, was found to be remarkably stable. Kinetic data obtained for rearrangement of this exo-bornyl tosylate have indicated the operation of tandem autocatalytic and pseudo-first-order transformations leading sequentially to the two isomeric camphene products. An extensive coset analysis of all possible rearrangement processes of the initially-formed cation formed from decomposition of the exo-tosylate has afforded a graph containing 336 classical cations (modelled at the AM1 and B3LYP levels) and 526 transition-state complexes (modelled at the AM1 level). This analysis afforded a viable 4-step classical mechanism connecting the first camphene product with the second. A more realistic study, involving non-classical carbocations, has afforded a graph of all possible (classical and non-classical) cations that could be formed by rearrangment of the initiallyformed cation. The resulting graph confirms that the only energetically feasible path corresponds to the classical mechanism, but simply involves two steps, including a novel, concerted Wagner-Meerwein – 6,2-hydride shift – Wagner-Meerwein rearrangement.
- Full Text:
- Date Issued: 2008
- Authors: Lobb, Kevin Alan
- Date: 2008
- Subjects: Chemistry, Organic -- Research Esters Organic compounds -- Synthesis Alkylation Chemical reactions -- Computer simulation Chemical kinetics Camphor Cinnamomum
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4414 , http://hdl.handle.net/10962/d1006770
- Description: A series of 3,3-ethylenedioxy-exo- and endo- bornyl esters have been prepared and subjected to α-benzylation using lithium diisopropylamide and benzyl bromide. In the exo-series of esters the diastereofacial selectivity of benzylation was found to improve (up to 34% d.e.) as the steric bulk of the O-alkyl group increased, whereas in the endo-series, a surprising decrease in stereoselectivity was observed as the steric bulk increased – an observation attributed to flexibility of the metal-coordinated endo-enolate system, compared to the relative rigidity of the exo analogues. The conformational options for each series was explored at the density functional theory level. Reductive cyclization of a range of specially prepared N-carbobenzyloxy-amino acid esters has been shown to afford the corresponding derivatives, contrary to previous reports that the cyclization is limited to the glycine derivative. The cyclization sequence has been explored in detail, and the yield has been shown to be critically dependent on the stereochemistry of the α-amino acid moiety. Moreover, it seems that reductive cyclization occurs more readily with the endo- rather than the exo-bornyl N-CBZ-amino acid esters. Molecular modelling of relevant transition states at the DFT levels indicates that L-amino acid-derived systems should cyclize preferably in the exo-series and D-amino acid-derived systems should cyclize preferably in the endo series. Studies of alkylation of an iminolactone system have reported an interesting anomaly - exo-methylation is observed while endo-alkylation predominates for larger alkyl groups. This has been studied in detail at the DFT level, and the anomaly is attributed to thermodynamic control in the methyl case, whereas kinetic control is the norm in this system. Preliminary computer modelling of the intramolecular rearrangement of a 3,3-xylylbornyl system at the HF/STO-3G level raised doubts concerning the structure assigned by Evans to one of the rearrangement products, prompting an X-ray crystallographic analysis and leading to the revision of its structure from a pinene to a camphene derivative. The previously elusive spiro[bornane-3,2’-indan]-2-exo-tosylate has been successfully isolated, and the kinetics of its ready decomposition to the two camphene products has been followed by 1H NMR spectroscopy. The endo-tosylate analogue, on the other hand, was found to be remarkably stable. Kinetic data obtained for rearrangement of this exo-bornyl tosylate have indicated the operation of tandem autocatalytic and pseudo-first-order transformations leading sequentially to the two isomeric camphene products. An extensive coset analysis of all possible rearrangement processes of the initially-formed cation formed from decomposition of the exo-tosylate has afforded a graph containing 336 classical cations (modelled at the AM1 and B3LYP levels) and 526 transition-state complexes (modelled at the AM1 level). This analysis afforded a viable 4-step classical mechanism connecting the first camphene product with the second. A more realistic study, involving non-classical carbocations, has afforded a graph of all possible (classical and non-classical) cations that could be formed by rearrangment of the initiallyformed cation. The resulting graph confirms that the only energetically feasible path corresponds to the classical mechanism, but simply involves two steps, including a novel, concerted Wagner-Meerwein – 6,2-hydride shift – Wagner-Meerwein rearrangement.
- Full Text:
- Date Issued: 2008
Purification, characterisation and application of inulinase and transferase enzymes in the production of fructose and oligosaccharides
- Authors: Mutanda, Taurai
- Date: 2008
- Subjects: Fructose Transferases Oligosaccharides
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4448 , http://hdl.handle.net/10962/d1007734
- Description: Inulin hydrolysis can occur as a result of the action of exoinulinases and endoinulinases acting alone or synergistically. Exoinulinases cleave the non-reducing β-(2, I) end of inulin releasing fructose while endoinulinases act on the internal linkages randomly to release inulotrioses (F₃), inulotetraoses (F₄) and inulopentaoses (F₅) as major products. Fructosyltransferases act by cleaving a sucrose molecule and then transferring the liberated fructose molecule to an acceptor molecule such as sucrose or another oligosaccharide to elongate the short chain fructooligosaccharide. The production of high yields of oligosaccharides of specific chain length from simple raw materials such as inulin and sucrose is a challenge. Oligosaccharides of chain length up to degree of polymerisation (DP) 5 and fructose were produced using preparations of three commercial microbial enzymes. Production of these novel oligosaccharides was achieved by employing response surface methodology (RSM) with central composite experimental design (CCD) for optimising product yield. Using a crude Novozyme 960 endoinulinase preparation isolated from Aspergillus niger, the following conditions gave a high inulooligosaccharide (lOS) yield, temperature (60 ºC), 150 g/L inulin concentration, 48 h incubation; pH 6.0 and enzyme dosage of 60 U/ml. Under these conditions, inulotrioses (70.3 mM), inulotetraoses (38.8 mM), and inulopentaoses, (3.5 mM) were produced. Response surface regression predicted similar product levels under similar conditions. The crude endoinulinase was purified through a three step purification procedure with a yield of 1.11 % and 3.5 fold purification. The molecular weight of this endoinulinase was estimated to be 68 .1 kDa by SDS-PAGE and its endoinulinase nature was confirmed by native PAGE. The purified endoinulinase was more efficient in production of lOS than the crude endoinulinase preparation. The purified endoinulinase demonstrated a high affinity for the inulin substrate (Km[subscript] 3.53 mM, Vmax[subscript] 666.67 μmol/min/ml). Pectinex Ultra SP-L, a commercial crude enzyme preparation isolated from Aspergillus aculeatus is a cocktail of several enzymes including a fructosyltransferase. The crude enzyme showed both transfructosylation and hydrolytic activity in 200 to 600 g/L sucrose. The main fructooligosaccharides produced from sucrose were l-kestose (GF₂), nystose (GF₃) and fructofuranosyl nystose (GF₄). After the first RSM, with the coded independent variables of temperature, incubation time, pH and sucrose concentration, the highest levels of GF₂, was 68.61 mM, under sucrose concentration 600 g/L, temperature 60°C, enzyme dosage 20 U/ml , pH 5.6, after 4 h incubation. A sucrose concentration of 400 g/L favoured the synthesis of high levels of GF₃ and GF₄. In the second RSM the maximal yields of GF₂, GF₃ and GF₄ were 152.07 mM, 131.38 mM and 43.99 mM respectively. A purified fructosyltransferase did not synthesise GF₄. Ammonium ions were demonstrated to enhance the yield of FOS. A mixture of glucose and fructose was used as substrate for FOS synthesis and no FOS were formed. Glucose was shown to be an end product inhibitor of the fructosyltransferase and therefore hinders the formation of high FOS yield. Fructozyme, isolated from Aspergillus ficuum is a mixture of exo and endoinulinases with the former being predominant was used for fructose production from inulin hydrolysis. The exoinulinase was purified to electrophoretic homogeneity by a three step purification procedure. The molecular weight of the enzyme was estimated to be 53 kDa with a 2 I % yield and 4.2-fold. Response surface regression was used to predict the maximum fructose levels achievable under the combinations of temperature, enzyme dosage and incubation time. A reaction time (48 h), enzyme dosage (100 U/ml) and inulin concentration (150 g/l) at pH 5.0 at 50°C gave higher fructose levels (106.6 mg/ml) using crude exoinulinase as compared to 98.43 mg/ml using the purified exoinulinase. These findings indicate that higher levels of fructose require longer incubation periods and higher inulin substrate concentrations with higher enzyme dosage. The crude exoinulinase preparation gave fairly higher levels of fructose than the purified exoinulinase and this is due to the presence of other hydrolytic enzymes in the crude preparation. The conditions established by RSM and CCO were adequate in producing high yield of oligosaccharides and fructose and can therefore be applied for their industrial production since they are in high demand due to their health benefits as prebiotics.
- Full Text:
- Date Issued: 2008
- Authors: Mutanda, Taurai
- Date: 2008
- Subjects: Fructose Transferases Oligosaccharides
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4448 , http://hdl.handle.net/10962/d1007734
- Description: Inulin hydrolysis can occur as a result of the action of exoinulinases and endoinulinases acting alone or synergistically. Exoinulinases cleave the non-reducing β-(2, I) end of inulin releasing fructose while endoinulinases act on the internal linkages randomly to release inulotrioses (F₃), inulotetraoses (F₄) and inulopentaoses (F₅) as major products. Fructosyltransferases act by cleaving a sucrose molecule and then transferring the liberated fructose molecule to an acceptor molecule such as sucrose or another oligosaccharide to elongate the short chain fructooligosaccharide. The production of high yields of oligosaccharides of specific chain length from simple raw materials such as inulin and sucrose is a challenge. Oligosaccharides of chain length up to degree of polymerisation (DP) 5 and fructose were produced using preparations of three commercial microbial enzymes. Production of these novel oligosaccharides was achieved by employing response surface methodology (RSM) with central composite experimental design (CCD) for optimising product yield. Using a crude Novozyme 960 endoinulinase preparation isolated from Aspergillus niger, the following conditions gave a high inulooligosaccharide (lOS) yield, temperature (60 ºC), 150 g/L inulin concentration, 48 h incubation; pH 6.0 and enzyme dosage of 60 U/ml. Under these conditions, inulotrioses (70.3 mM), inulotetraoses (38.8 mM), and inulopentaoses, (3.5 mM) were produced. Response surface regression predicted similar product levels under similar conditions. The crude endoinulinase was purified through a three step purification procedure with a yield of 1.11 % and 3.5 fold purification. The molecular weight of this endoinulinase was estimated to be 68 .1 kDa by SDS-PAGE and its endoinulinase nature was confirmed by native PAGE. The purified endoinulinase was more efficient in production of lOS than the crude endoinulinase preparation. The purified endoinulinase demonstrated a high affinity for the inulin substrate (Km[subscript] 3.53 mM, Vmax[subscript] 666.67 μmol/min/ml). Pectinex Ultra SP-L, a commercial crude enzyme preparation isolated from Aspergillus aculeatus is a cocktail of several enzymes including a fructosyltransferase. The crude enzyme showed both transfructosylation and hydrolytic activity in 200 to 600 g/L sucrose. The main fructooligosaccharides produced from sucrose were l-kestose (GF₂), nystose (GF₃) and fructofuranosyl nystose (GF₄). After the first RSM, with the coded independent variables of temperature, incubation time, pH and sucrose concentration, the highest levels of GF₂, was 68.61 mM, under sucrose concentration 600 g/L, temperature 60°C, enzyme dosage 20 U/ml , pH 5.6, after 4 h incubation. A sucrose concentration of 400 g/L favoured the synthesis of high levels of GF₃ and GF₄. In the second RSM the maximal yields of GF₂, GF₃ and GF₄ were 152.07 mM, 131.38 mM and 43.99 mM respectively. A purified fructosyltransferase did not synthesise GF₄. Ammonium ions were demonstrated to enhance the yield of FOS. A mixture of glucose and fructose was used as substrate for FOS synthesis and no FOS were formed. Glucose was shown to be an end product inhibitor of the fructosyltransferase and therefore hinders the formation of high FOS yield. Fructozyme, isolated from Aspergillus ficuum is a mixture of exo and endoinulinases with the former being predominant was used for fructose production from inulin hydrolysis. The exoinulinase was purified to electrophoretic homogeneity by a three step purification procedure. The molecular weight of the enzyme was estimated to be 53 kDa with a 2 I % yield and 4.2-fold. Response surface regression was used to predict the maximum fructose levels achievable under the combinations of temperature, enzyme dosage and incubation time. A reaction time (48 h), enzyme dosage (100 U/ml) and inulin concentration (150 g/l) at pH 5.0 at 50°C gave higher fructose levels (106.6 mg/ml) using crude exoinulinase as compared to 98.43 mg/ml using the purified exoinulinase. These findings indicate that higher levels of fructose require longer incubation periods and higher inulin substrate concentrations with higher enzyme dosage. The crude exoinulinase preparation gave fairly higher levels of fructose than the purified exoinulinase and this is due to the presence of other hydrolytic enzymes in the crude preparation. The conditions established by RSM and CCO were adequate in producing high yield of oligosaccharides and fructose and can therefore be applied for their industrial production since they are in high demand due to their health benefits as prebiotics.
- Full Text:
- Date Issued: 2008
Studies directed towards the synthesis of chromone carbaldehyde-derived HIV-1 protease inhibitors
- Authors: Molefe, Duduzile Mabel
- Date: 2008
- Subjects: Protease Inhibitors , HIV infections , HIV (Viruses) , AIDS (Disease) , Proteolytic enzymes , Heterocyclic compounds -- Derivatives , Chemical kinetics , Nuclear magnetic resonance spectroscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4526 , http://hdl.handle.net/10962/d1015542
- Description: A series of chromone-3-carbaldehydes have been prepared using Vilsmeier-Haack methodology while a corresponding series of chromone-2-carbaldeydes have been synthesized via the Kostanecki-Robinson reaction. Baylis-Hillman reactions have been conducted on both series of chromone carbaldehydes using three different catalysts, viz., 1,4-diazabicyclo(2.2.2]octane (DABCO), 1,8-diazabicyclo[5.4.0]undec- 7-ene (DBU) and 3-hydroxyquinuclidine (3HQ), and acrylonitrile, methyl acrylate and methyl vinyl ketone as the activated alkenes. These reactions have typically (but not always!) afforded both normal Baylis-Hillman and dimeric products. Attention has also been given to the use of 1-methyl-2-pyrrolidine (1-NMP), an ionic liquid, to replace normal organic solvents, and it has been found that, in the presence of DABCO, chromone-3-carbaldehydes afford the dimeric products alone. Reactions of chromone-3-carbaldehydes with methyl vinyl ketone have yielded unexpected, novel adducts, which appear to arise from preferential attack at C(2) in the chromone nucleus. Research on chromone-2-carbaldeydes under Baylis-Hillman conditions has also resulted in the formation of some interesting products instead of the expected Baylis-Hillman adducts. The Baylis-Hillman products have been explored as substrates for aza-Michael reactions using various amino derivatives including protected amino acids in the presence of the tetrabutylammonium bromide (TBAB) and the ionic liquid, 3-butyl-1- methylimidazoleboranetetrafluoride (BmimBF₄), as catalysts. The aza-Michael products have been targeted as truncated ritonavir analogues for investigation as potential HIV -1 protease inhibitors, and representative compounds have been subjected to enzyme inhibition assays to explore the extent and type of inhibition. Lineweaver-Burk and Dixon plots have indicated competitive inhibition in one case as well as non-competitive inhibition in another, and the inhibition constants (Ki) have been compared with that of the ritonavir. Computer modelling studies have also been conducted on selected chromonecontaining derivatives, using the ACCELRYS Cerius² platform. Interactive docking of the chromone-containing ligands into the HIV -1 protease receptor site, using the Ligandfit module, has indicated the importance of hydrogen-bonding interactions mediated by bridging water molecules situated in the receptor cavity. NMR spectroscopy has been used to elucidate complex and competing mechanistic pathways involved in the Baylis-Hillman reactions of selected 2-nitrobenzaldehydes with MVK in the presence of DABCO - reactions which afford the normal BaylisHillman product, the MVK dimer and syn- and anti-Baylis-Hillman type diadducts. The kinetic data confirm the concomitant operation of two pathways and reveal that, in the initial stage of the reaction, the product distribution is kinetically controlled, whereas in the latter stage, thermodynamic control results in the consumption of the normal Baylis-Hillman product and predominance of the anti-diadduct.
- Full Text:
- Date Issued: 2008
- Authors: Molefe, Duduzile Mabel
- Date: 2008
- Subjects: Protease Inhibitors , HIV infections , HIV (Viruses) , AIDS (Disease) , Proteolytic enzymes , Heterocyclic compounds -- Derivatives , Chemical kinetics , Nuclear magnetic resonance spectroscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4526 , http://hdl.handle.net/10962/d1015542
- Description: A series of chromone-3-carbaldehydes have been prepared using Vilsmeier-Haack methodology while a corresponding series of chromone-2-carbaldeydes have been synthesized via the Kostanecki-Robinson reaction. Baylis-Hillman reactions have been conducted on both series of chromone carbaldehydes using three different catalysts, viz., 1,4-diazabicyclo(2.2.2]octane (DABCO), 1,8-diazabicyclo[5.4.0]undec- 7-ene (DBU) and 3-hydroxyquinuclidine (3HQ), and acrylonitrile, methyl acrylate and methyl vinyl ketone as the activated alkenes. These reactions have typically (but not always!) afforded both normal Baylis-Hillman and dimeric products. Attention has also been given to the use of 1-methyl-2-pyrrolidine (1-NMP), an ionic liquid, to replace normal organic solvents, and it has been found that, in the presence of DABCO, chromone-3-carbaldehydes afford the dimeric products alone. Reactions of chromone-3-carbaldehydes with methyl vinyl ketone have yielded unexpected, novel adducts, which appear to arise from preferential attack at C(2) in the chromone nucleus. Research on chromone-2-carbaldeydes under Baylis-Hillman conditions has also resulted in the formation of some interesting products instead of the expected Baylis-Hillman adducts. The Baylis-Hillman products have been explored as substrates for aza-Michael reactions using various amino derivatives including protected amino acids in the presence of the tetrabutylammonium bromide (TBAB) and the ionic liquid, 3-butyl-1- methylimidazoleboranetetrafluoride (BmimBF₄), as catalysts. The aza-Michael products have been targeted as truncated ritonavir analogues for investigation as potential HIV -1 protease inhibitors, and representative compounds have been subjected to enzyme inhibition assays to explore the extent and type of inhibition. Lineweaver-Burk and Dixon plots have indicated competitive inhibition in one case as well as non-competitive inhibition in another, and the inhibition constants (Ki) have been compared with that of the ritonavir. Computer modelling studies have also been conducted on selected chromonecontaining derivatives, using the ACCELRYS Cerius² platform. Interactive docking of the chromone-containing ligands into the HIV -1 protease receptor site, using the Ligandfit module, has indicated the importance of hydrogen-bonding interactions mediated by bridging water molecules situated in the receptor cavity. NMR spectroscopy has been used to elucidate complex and competing mechanistic pathways involved in the Baylis-Hillman reactions of selected 2-nitrobenzaldehydes with MVK in the presence of DABCO - reactions which afford the normal BaylisHillman product, the MVK dimer and syn- and anti-Baylis-Hillman type diadducts. The kinetic data confirm the concomitant operation of two pathways and reveal that, in the initial stage of the reaction, the product distribution is kinetically controlled, whereas in the latter stage, thermodynamic control results in the consumption of the normal Baylis-Hillman product and predominance of the anti-diadduct.
- Full Text:
- Date Issued: 2008
Studies in marine diterpene chemistry
- Van Wyk, Albert Wynand Wincke
- Authors: Van Wyk, Albert Wynand Wincke
- Date: 2008
- Subjects: Natural products Diterpenes Mollusks Marine metabolites Chemical oceanography
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4354 , http://hdl.handle.net/10962/d1005019
- Description: This thesis comprises both a natural product investigation and a synthetic component. The natural product investigations are presented in Chapters Two and Three. In Chapter Two the isolation and spectroscopic identification of the new isocopalane diterpene 12S,13R,14Sisocopalan- 13-ol-12,14-diacetate (2.1) and two known 3-(14S)-isocopal-12-ene-15-oyl-1- acetyl-sn-glycerol (2.2) and 3-(14S)-isocopal-12-ene-15-oyl-2-acetyl-sn-glycerol (2.3) from a single, large, unidentified sub-Antarctic nudibranch, collected near Marion Island, approximately 2000 km south of Cape Town are described. Chapter Three discusses the isolation, spectroscopic structure elucidation and anti-oesophageal cancer activity (3.1-3.4 only) of two known labdane diterpenes 6β,7α-diacetoxylabda-8,13E-dien-15-ol (3.1) and 2α,6β,7α-triacetoxylabda-8,13E-dien-15-ol (3.2) and one new 6β,7α,15-triacetoxylabda 8,13E-diene (3.3), as well as new 3α,11-dihydroxy-9,11-seco-cholest-4,7-dien-6,9-dione (3.4) and cholest 7-en-3,5,7-triol (3.5) from the endemic pulmonate mollusc, Trimusculus costatus. The absolute configuration of 3.2, and hence 3.1 and 3.3 (from biogenetic arguments) was determined through X-ray diffraction of a single crystal of the camphanate ester of 3.2. The absolute configuration of the secondary hydroxyl at C-3 of 3.4 was established using the Modified Mosher’s method. The synthetic component of the thesis commences in Chapter Four with the semi-synthesis of labdane diterpene nitriles 9α-cyano-15,16-epoxy-7β-hydroxylabda-13(16),14-dien-6-one (4.1), 9α-cyano-15,16-epoxy-7-hydroxylabda-7,13(16),14-trien-6-one (4.2) and 9α-cyano-15,16- epoxy-6β,7β dihydroxylabda-13(16),14-diene (4.3) from the terrestrial labdane diterpene, hispanolone (4.4). This work is an extension of previous synthetic studies directed towards the synthesis of T. costatus metabolites. Diterpenes 4.1-4.3 exhibited in planta activity against the economically important crop pathogens, Magnaporthea grisea and Puccinia recondita. Chapter Five describes the successful semi-synthesis of two isomeric marine molluscan labdane diterpene aldehyde metabolites, labd-13E-ene-8β-ol-15-al (5.1) and labd-13Z-ene- 8β-ol-15-al (5.2) from the commercially available, terrestrial plant derived, labdane diterpene manool (5.3). Diterpenes 5.1 and 5.2, originally isolated from the Mediterranean nudibranch,Pleurobranchaea meckelii and selected diterpenes arising from this synthesis were evaluated for their activity against an oesophageal cancer cell line (WHCO1). Chapter Six further develops the research discussed in Chapter Five, where ethyl 17-norabiet-13(15)-E-en-8β-ol- 16-oate (5.49) and ethyl 17-norabiet-13(15)-Z-en-8β-ol-16-oate (5.50) were first semisynthesized serendipitously. Based on their structural relationship to naturally occurring tricyclic diterpenes with anti-plasmodial activity, tricyclic diterpenes, 17-norpimaran-13α- ethoxy-8,16-olactone (6.6), 17-norisopimar-15-ene-8β,13β-diol (6.7), 17-norisopimarane- 8β,16-diol (6.8) and 17-norabiet-13(15)-ene-8β,16-diol (6.9) were semi-synthesized from the terrestrial labdane diterpene, 5.3, and critically evaluated for their antimalarial potential from parasite inhibition and haemolytic studies.
- Full Text:
- Date Issued: 2008
- Authors: Van Wyk, Albert Wynand Wincke
- Date: 2008
- Subjects: Natural products Diterpenes Mollusks Marine metabolites Chemical oceanography
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4354 , http://hdl.handle.net/10962/d1005019
- Description: This thesis comprises both a natural product investigation and a synthetic component. The natural product investigations are presented in Chapters Two and Three. In Chapter Two the isolation and spectroscopic identification of the new isocopalane diterpene 12S,13R,14Sisocopalan- 13-ol-12,14-diacetate (2.1) and two known 3-(14S)-isocopal-12-ene-15-oyl-1- acetyl-sn-glycerol (2.2) and 3-(14S)-isocopal-12-ene-15-oyl-2-acetyl-sn-glycerol (2.3) from a single, large, unidentified sub-Antarctic nudibranch, collected near Marion Island, approximately 2000 km south of Cape Town are described. Chapter Three discusses the isolation, spectroscopic structure elucidation and anti-oesophageal cancer activity (3.1-3.4 only) of two known labdane diterpenes 6β,7α-diacetoxylabda-8,13E-dien-15-ol (3.1) and 2α,6β,7α-triacetoxylabda-8,13E-dien-15-ol (3.2) and one new 6β,7α,15-triacetoxylabda 8,13E-diene (3.3), as well as new 3α,11-dihydroxy-9,11-seco-cholest-4,7-dien-6,9-dione (3.4) and cholest 7-en-3,5,7-triol (3.5) from the endemic pulmonate mollusc, Trimusculus costatus. The absolute configuration of 3.2, and hence 3.1 and 3.3 (from biogenetic arguments) was determined through X-ray diffraction of a single crystal of the camphanate ester of 3.2. The absolute configuration of the secondary hydroxyl at C-3 of 3.4 was established using the Modified Mosher’s method. The synthetic component of the thesis commences in Chapter Four with the semi-synthesis of labdane diterpene nitriles 9α-cyano-15,16-epoxy-7β-hydroxylabda-13(16),14-dien-6-one (4.1), 9α-cyano-15,16-epoxy-7-hydroxylabda-7,13(16),14-trien-6-one (4.2) and 9α-cyano-15,16- epoxy-6β,7β dihydroxylabda-13(16),14-diene (4.3) from the terrestrial labdane diterpene, hispanolone (4.4). This work is an extension of previous synthetic studies directed towards the synthesis of T. costatus metabolites. Diterpenes 4.1-4.3 exhibited in planta activity against the economically important crop pathogens, Magnaporthea grisea and Puccinia recondita. Chapter Five describes the successful semi-synthesis of two isomeric marine molluscan labdane diterpene aldehyde metabolites, labd-13E-ene-8β-ol-15-al (5.1) and labd-13Z-ene- 8β-ol-15-al (5.2) from the commercially available, terrestrial plant derived, labdane diterpene manool (5.3). Diterpenes 5.1 and 5.2, originally isolated from the Mediterranean nudibranch,Pleurobranchaea meckelii and selected diterpenes arising from this synthesis were evaluated for their activity against an oesophageal cancer cell line (WHCO1). Chapter Six further develops the research discussed in Chapter Five, where ethyl 17-norabiet-13(15)-E-en-8β-ol- 16-oate (5.49) and ethyl 17-norabiet-13(15)-Z-en-8β-ol-16-oate (5.50) were first semisynthesized serendipitously. Based on their structural relationship to naturally occurring tricyclic diterpenes with anti-plasmodial activity, tricyclic diterpenes, 17-norpimaran-13α- ethoxy-8,16-olactone (6.6), 17-norisopimar-15-ene-8β,13β-diol (6.7), 17-norisopimarane- 8β,16-diol (6.8) and 17-norabiet-13(15)-ene-8β,16-diol (6.9) were semi-synthesized from the terrestrial labdane diterpene, 5.3, and critically evaluated for their antimalarial potential from parasite inhibition and haemolytic studies.
- Full Text:
- Date Issued: 2008
Synthetic, spectrometric and computer modelling studies of novel ATP analogues
- Gxoyiya, Babalwa Siliziwe Blossom
- Authors: Gxoyiya, Babalwa Siliziwe Blossom
- Date: 2008
- Subjects: Spectrum analysis Tuberculosis -- Treatment Chemotherapy Adenosine triphosphate Adenosine triphosphate -- Synthesis Adenosine triphosphate -- Computer simulation Adenosine triphosphate -- Spectrometric imaging Glutamine synthetase Tuberculosis -- Chemotherapy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4386 , http://hdl.handle.net/10962/d1005051
- Description: This study has been concerned with the design and synthesis of A TP analogues with the potential to act as inhibitors of glutamine synthetase - a novel target for therapeutic intervention in the treatment of tuberculosis. Using a structural -analogy approach, various 3-indolylalkanoic acid, benzimidazole and pyrazolo[3,4-dJpyrimidine derivatives have been prepared and characterized. Alkylation of the heterocyclic bases using 4-(bromomethyl)-2,2-dimethyl-1 ,3-d ioxolane, 2-(bromomethoxy)ethyl acetate and 2-(chloroethoxy)ethanol in the presence of either NaH or BulOK afforded the corresponding N-alkylated derivatives of benzimidazole and 4-aminopyrazolo[3,4-dJpyrimidine (4-APP). Similar reactions with 3-indo lylalkanoic esters resulted in O-alkyl cleavage with the formation of new esters. Alkylation of benzimidazole with allyl bromide, 4-bromobutene and 2-methylbut-2-ene has also been shown to afford the corresponding l-alkenylbenzimidazoles in moderate to excellent yield (43-96%). Subsequent oxidation of these products using CTAP, gave the dihydroxy derivatives in poor to good yields (26-77%). Phosphorylation of various hydroxy derivatives of benzimidazole and 4-APP has been achieved using diethyl chlorophosphate to afford the corresponding monophosphate and 1,2-diphosphate esters. Glycosylation of each of the heterocyclic bases has been successfully achieved using 1,2,3,4,6-penta-O-acetyl-D-glucopyranose and SnCl4 in acetonitri le, while methanolysis of the resulting tetraacetates, using methanolic NaOMe, afforded the hydroxy derivatives in good yield (50-70%). Various 1- and 2-dimensional NMR spectroscopic methods (e.g., IH, 13C, lip, COSY, HSQC and HMBC) have been used to confirm the structures of the synthesized A IP analogues. The application of NMR prediction programmes has been explored, permitting assessment of their agreement with the experimental data and confirmation of assigned structures. High-resolution electron impact (EI) mass spectrometric data have been used to explore the mass fragmentation pathways exhibited by selected derivatives, and certain common fragmentations have been identified. Molecular modelling of selected products as potential glutamine synthetase ligands has been performed on the Accelrys Cerius2 platform, and interactive receptor-ligand docking studies have been conducted using the Ligand-Fit module. These studies have revealed possible hydrogen-boding interactions between the selected analogues and various amino acid residues in the glutamine synthetase active site.
- Full Text:
- Date Issued: 2008
- Authors: Gxoyiya, Babalwa Siliziwe Blossom
- Date: 2008
- Subjects: Spectrum analysis Tuberculosis -- Treatment Chemotherapy Adenosine triphosphate Adenosine triphosphate -- Synthesis Adenosine triphosphate -- Computer simulation Adenosine triphosphate -- Spectrometric imaging Glutamine synthetase Tuberculosis -- Chemotherapy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4386 , http://hdl.handle.net/10962/d1005051
- Description: This study has been concerned with the design and synthesis of A TP analogues with the potential to act as inhibitors of glutamine synthetase - a novel target for therapeutic intervention in the treatment of tuberculosis. Using a structural -analogy approach, various 3-indolylalkanoic acid, benzimidazole and pyrazolo[3,4-dJpyrimidine derivatives have been prepared and characterized. Alkylation of the heterocyclic bases using 4-(bromomethyl)-2,2-dimethyl-1 ,3-d ioxolane, 2-(bromomethoxy)ethyl acetate and 2-(chloroethoxy)ethanol in the presence of either NaH or BulOK afforded the corresponding N-alkylated derivatives of benzimidazole and 4-aminopyrazolo[3,4-dJpyrimidine (4-APP). Similar reactions with 3-indo lylalkanoic esters resulted in O-alkyl cleavage with the formation of new esters. Alkylation of benzimidazole with allyl bromide, 4-bromobutene and 2-methylbut-2-ene has also been shown to afford the corresponding l-alkenylbenzimidazoles in moderate to excellent yield (43-96%). Subsequent oxidation of these products using CTAP, gave the dihydroxy derivatives in poor to good yields (26-77%). Phosphorylation of various hydroxy derivatives of benzimidazole and 4-APP has been achieved using diethyl chlorophosphate to afford the corresponding monophosphate and 1,2-diphosphate esters. Glycosylation of each of the heterocyclic bases has been successfully achieved using 1,2,3,4,6-penta-O-acetyl-D-glucopyranose and SnCl4 in acetonitri le, while methanolysis of the resulting tetraacetates, using methanolic NaOMe, afforded the hydroxy derivatives in good yield (50-70%). Various 1- and 2-dimensional NMR spectroscopic methods (e.g., IH, 13C, lip, COSY, HSQC and HMBC) have been used to confirm the structures of the synthesized A IP analogues. The application of NMR prediction programmes has been explored, permitting assessment of their agreement with the experimental data and confirmation of assigned structures. High-resolution electron impact (EI) mass spectrometric data have been used to explore the mass fragmentation pathways exhibited by selected derivatives, and certain common fragmentations have been identified. Molecular modelling of selected products as potential glutamine synthetase ligands has been performed on the Accelrys Cerius2 platform, and interactive receptor-ligand docking studies have been conducted using the Ligand-Fit module. These studies have revealed possible hydrogen-boding interactions between the selected analogues and various amino acid residues in the glutamine synthetase active site.
- Full Text:
- Date Issued: 2008
Thermal, spectroscopic and x-ray diffraction studies of copper(II) 1,2,4,5-Benzenetetracarboxylates and copper(II) oxalate a study of metal-organic frameworks
- Authors: Lamprecht, Emmanuel
- Date: 2008
- Subjects: Organometallic compounds Copper Oxalates -- Thermal properties Organic compounds -- Synthesis Spectrum analysis X-rays -- Diffraction
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4389 , http://hdl.handle.net/10962/d1005054
- Description: Novel and known metal organic frameworks with copper(II), sodium and 1,2,4,5-benzenetetracarboxylate were prepared by ambient precipitation, solvothermal and gel-synthesis methods, and characterized by single-crystal X-ray diffraction, X-ray powder diffraction, infrared spectroscopy, differential scanning calorimetry, and thermogravimetry with FTIR evolved-gas analysis. Some of these complexes were investigated for guest inclusion properties with water (the original guest species), methanol, ethanol and pyridine. The gel-synthesis products were the most interesting. The novel threedimensional metal-organic framework complex Cu₂ Na(OH)L·7H₂O (where L=1,2,4,5-benzenetetracarboxylate) -formed by gel-synthesis- is a covalent three-dimensional metal organic framework polymer with open channels containing both guest water molecules and water molecules coordinated to sodium. The structure collapsed on dehydration, but was essentially restored to the original structure on rehydration in moist air. On exposure of the dehydrated material to methanol and ethanol vapour, significant uptake of these solvents was observed, and the resolvated structures closely resembled that of the parent material. On heating in dry nitrogen, small amounts of methanol and ethanol remained until about 280 °C, when loss of the remaining guest triggered decomposition of the framework. The related complex, Cu₂¼(OH)½ L·7½H₂O (or possibly Cu₂⅓ (OH)⅔L·8H₂O) -formed by gel-synthesis- had a different physical appearance to Cu₂Na(OH)L·7H₂O above, but had nearly identical X-ray diffraction pattern, mid-infrared spectrum and thermal behaviour. The novel complex Cu₄Na₄L₃·14H₂O -formed by gel-synthesis- is a covalent three-dimensional metal-organic framework with small channels containing both guest water molecules and water coordinated to sodium and copper. Upon dehydration the structure collapsed, but on rehydration in moist air the original structure was partly restored. The dehydrated material did not absorb methanol. Known two-dimensional polymeric complexes [Cu₂L·6H₂O]·4H₂O and [Cu₂L·4H₂O]·2H₂O were also obtained by gel-synthesis, and were characterized and investigated for guest inclusion properties. The structures of these complexes collapsed on dehydration, and were only partly restored on rehydration in saturated water vapour. The dehydrated materials did not absorb methanol. The two-dimensional polymeric mixed-ligand complex Cu₂(pyridine)₄·6H₂O -formed very slowly by gel-synthesis- was characterized by TG-FTIR, and was shown to undergo a complicated decomposition involving the loss of water and pyridine, carbon dioxide and carbon monoxide in various stages. Solvothermal synthesis did not yield materials suitable for single-crystal X-ray diffraction studies or inclusion studies, producing only an anhydrous or hemihydrate complex with the formula Cu₂L·0.65H2O. Ambient precipitation syntheses did not yield materials suitable for singlecrystal diffraction studies, forming products approximately equivalent to the complexes [Cu₂L·6H₂O]·4H₂O and Cu₂¼(OH)½L·7 ½H₂O above. During the course of the above study it was discovered that, on changing the DSC purge from nitrogen to argon, the normally exothermic carboxylate decompositions appeared to become endothermic. The effects of the supposedly inert atmospheres of argon and nitrogen on the decomposition-mechanism of copper(II) oxalate -a well-studied copper carboxylate- were therefore studied by DSC, TG, TG-FTIR and XRPD. DSC experiments were performed in nitrogen and argon at different flow-rates, in various mixtures of nitrogen and argon, and at various heating rates. Regardless of the proportions of nitrogen and argon, the DSC residues consisted mainly of copper metal, a small amount of copper(I) oxide (cuprite) and, in some circumstances, traces of copper(II) oxide (tenorite). Also, regardless of whether TG-FTIR experiments were performed under argon or nitrogen, the gaseous decomposition products consisted mainly of carbon dioxide, with traces of carbon monoxide being detected over part of the decomposition period. Various explanations for the thermal behaviour are discussed, and it is possible that small amounts of O2 or monatomic oxygen were given off during the decomposition under argon. The design and implementation of a low-cost prototype X-ray proportional counter detector system, consisting of a hybrid analog-digital computer built using commonly available electronic components, is presented. This system was designed to replace ageing discrete-transistor designs still in use in earlier X-ray diffractometers. The prototype performs the functions of pulse-shaping, pulseheight discrimination, counting and scaling, and provides both digital and scaled analog outputs.
- Full Text:
- Date Issued: 2008
- Authors: Lamprecht, Emmanuel
- Date: 2008
- Subjects: Organometallic compounds Copper Oxalates -- Thermal properties Organic compounds -- Synthesis Spectrum analysis X-rays -- Diffraction
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4389 , http://hdl.handle.net/10962/d1005054
- Description: Novel and known metal organic frameworks with copper(II), sodium and 1,2,4,5-benzenetetracarboxylate were prepared by ambient precipitation, solvothermal and gel-synthesis methods, and characterized by single-crystal X-ray diffraction, X-ray powder diffraction, infrared spectroscopy, differential scanning calorimetry, and thermogravimetry with FTIR evolved-gas analysis. Some of these complexes were investigated for guest inclusion properties with water (the original guest species), methanol, ethanol and pyridine. The gel-synthesis products were the most interesting. The novel threedimensional metal-organic framework complex Cu₂ Na(OH)L·7H₂O (where L=1,2,4,5-benzenetetracarboxylate) -formed by gel-synthesis- is a covalent three-dimensional metal organic framework polymer with open channels containing both guest water molecules and water molecules coordinated to sodium. The structure collapsed on dehydration, but was essentially restored to the original structure on rehydration in moist air. On exposure of the dehydrated material to methanol and ethanol vapour, significant uptake of these solvents was observed, and the resolvated structures closely resembled that of the parent material. On heating in dry nitrogen, small amounts of methanol and ethanol remained until about 280 °C, when loss of the remaining guest triggered decomposition of the framework. The related complex, Cu₂¼(OH)½ L·7½H₂O (or possibly Cu₂⅓ (OH)⅔L·8H₂O) -formed by gel-synthesis- had a different physical appearance to Cu₂Na(OH)L·7H₂O above, but had nearly identical X-ray diffraction pattern, mid-infrared spectrum and thermal behaviour. The novel complex Cu₄Na₄L₃·14H₂O -formed by gel-synthesis- is a covalent three-dimensional metal-organic framework with small channels containing both guest water molecules and water coordinated to sodium and copper. Upon dehydration the structure collapsed, but on rehydration in moist air the original structure was partly restored. The dehydrated material did not absorb methanol. Known two-dimensional polymeric complexes [Cu₂L·6H₂O]·4H₂O and [Cu₂L·4H₂O]·2H₂O were also obtained by gel-synthesis, and were characterized and investigated for guest inclusion properties. The structures of these complexes collapsed on dehydration, and were only partly restored on rehydration in saturated water vapour. The dehydrated materials did not absorb methanol. The two-dimensional polymeric mixed-ligand complex Cu₂(pyridine)₄·6H₂O -formed very slowly by gel-synthesis- was characterized by TG-FTIR, and was shown to undergo a complicated decomposition involving the loss of water and pyridine, carbon dioxide and carbon monoxide in various stages. Solvothermal synthesis did not yield materials suitable for single-crystal X-ray diffraction studies or inclusion studies, producing only an anhydrous or hemihydrate complex with the formula Cu₂L·0.65H2O. Ambient precipitation syntheses did not yield materials suitable for singlecrystal diffraction studies, forming products approximately equivalent to the complexes [Cu₂L·6H₂O]·4H₂O and Cu₂¼(OH)½L·7 ½H₂O above. During the course of the above study it was discovered that, on changing the DSC purge from nitrogen to argon, the normally exothermic carboxylate decompositions appeared to become endothermic. The effects of the supposedly inert atmospheres of argon and nitrogen on the decomposition-mechanism of copper(II) oxalate -a well-studied copper carboxylate- were therefore studied by DSC, TG, TG-FTIR and XRPD. DSC experiments were performed in nitrogen and argon at different flow-rates, in various mixtures of nitrogen and argon, and at various heating rates. Regardless of the proportions of nitrogen and argon, the DSC residues consisted mainly of copper metal, a small amount of copper(I) oxide (cuprite) and, in some circumstances, traces of copper(II) oxide (tenorite). Also, regardless of whether TG-FTIR experiments were performed under argon or nitrogen, the gaseous decomposition products consisted mainly of carbon dioxide, with traces of carbon monoxide being detected over part of the decomposition period. Various explanations for the thermal behaviour are discussed, and it is possible that small amounts of O2 or monatomic oxygen were given off during the decomposition under argon. The design and implementation of a low-cost prototype X-ray proportional counter detector system, consisting of a hybrid analog-digital computer built using commonly available electronic components, is presented. This system was designed to replace ageing discrete-transistor designs still in use in earlier X-ray diffractometers. The prototype performs the functions of pulse-shaping, pulseheight discrimination, counting and scaling, and provides both digital and scaled analog outputs.
- Full Text:
- Date Issued: 2008
- «
- ‹
- 1
- ›
- »