An electrospun nanofiber colorimetric probe for detection of Alkaline Phosphatase for diagnosis of liver toxicity
- Authors: Mohale, Mamello
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54532 , vital:26581
- Description: A novel electrospun nanofiber colorimetric probe for the detection of Alkaline Phosphatase (ALP) for diagnosis of liver toxicity was developed through electrospinning of a para nitrophenyl phosphate (pNPP) functionalised nylon polymer. The chemical stability of the enzyme substrate (pNPP) and its two products (para nitrophenol (pNP) and para nitrophenolate (pNPL)) was evaluated in biological (pH 7.4), acidic (pH 2) and alkaline (pH 9) pH, respectively. Enzyme kinetics models of Michaelis Menten (MM) and Lineweaver Burk (LB) were used to characterise free ALP. Solution and nanofiber assaying of free ALP and 10x diluted serum (spiked with ALP) was also carried out. The results demonstrated that pNPP and pNP were colourless while pNPL was yellow which indicated that all reagents were chemically stable. In addition, the chromophore of pNPL exhibited a strong molar extinction coefficient (ε) of 18,458 M-1 cm-1. LB plot being the most accurate compared to MM showed Vmax, Km and excess substrate concentration of 5.5 × 10-3 μmol/min-1, 0.025 mM and 0.25 mM respectively. Solution and nanofiber assaying of free ALP and serum confirmed a direct proportional correlation between the pNPL yellow colour intensity and enzyme activity up to 858 IU/L and 820 IU/L respectively. The dipping of the nanofiber layer into solution showed that the leaching rate of pNPP was extremely high at 1.37 × 10-3 A/min-1 as was observed after only the first 0.25 min interval. However, this was not of great concern since it was also observed that administration of the sample (20 μL) by a dropwise method minimised leaching compared to dipping. The preliminary findings on the effect of temperature on the chemical stability of pNPP indicated that it was stable below temperatures of 40°C while it hydrolysed at 80°C. Therefore a sensitive, rapid and simple colorimetric probe for the detection of ALP was developed. The probe exhibited characteristics that make it suitable to be incorporated into point of care colorimetric liver toxicity diagnostic devices for applications in resource poor settings and telemedicine.
- Full Text:
- Date Issued: 2014
- Authors: Mohale, Mamello
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54532 , vital:26581
- Description: A novel electrospun nanofiber colorimetric probe for the detection of Alkaline Phosphatase (ALP) for diagnosis of liver toxicity was developed through electrospinning of a para nitrophenyl phosphate (pNPP) functionalised nylon polymer. The chemical stability of the enzyme substrate (pNPP) and its two products (para nitrophenol (pNP) and para nitrophenolate (pNPL)) was evaluated in biological (pH 7.4), acidic (pH 2) and alkaline (pH 9) pH, respectively. Enzyme kinetics models of Michaelis Menten (MM) and Lineweaver Burk (LB) were used to characterise free ALP. Solution and nanofiber assaying of free ALP and 10x diluted serum (spiked with ALP) was also carried out. The results demonstrated that pNPP and pNP were colourless while pNPL was yellow which indicated that all reagents were chemically stable. In addition, the chromophore of pNPL exhibited a strong molar extinction coefficient (ε) of 18,458 M-1 cm-1. LB plot being the most accurate compared to MM showed Vmax, Km and excess substrate concentration of 5.5 × 10-3 μmol/min-1, 0.025 mM and 0.25 mM respectively. Solution and nanofiber assaying of free ALP and serum confirmed a direct proportional correlation between the pNPL yellow colour intensity and enzyme activity up to 858 IU/L and 820 IU/L respectively. The dipping of the nanofiber layer into solution showed that the leaching rate of pNPP was extremely high at 1.37 × 10-3 A/min-1 as was observed after only the first 0.25 min interval. However, this was not of great concern since it was also observed that administration of the sample (20 μL) by a dropwise method minimised leaching compared to dipping. The preliminary findings on the effect of temperature on the chemical stability of pNPP indicated that it was stable below temperatures of 40°C while it hydrolysed at 80°C. Therefore a sensitive, rapid and simple colorimetric probe for the detection of ALP was developed. The probe exhibited characteristics that make it suitable to be incorporated into point of care colorimetric liver toxicity diagnostic devices for applications in resource poor settings and telemedicine.
- Full Text:
- Date Issued: 2014
Characterization and application of phthalocyanine-magnetic nanoparticle conjugates anchored to electrospun polyamide nanofibers
- Authors: Ledwaba, Mpho
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54610 , vital:26593
- Description: This work presents the syntheses, photophysical and photochemical characterization of zinc tetracarboxyphenoxy phthalocyanine (ZnTCPPc, 3) and its gadolinium oxide nanoparticle conjugate (4). By means of spectroscopic and microscopic characterization, the conjugation of the ZnTCPPc to the silica coated gadolinium oxide nanoparticles (Si-Gd2O3 NPs, 2) through an amide bond was confirmed. The thermal stability, morphology, nanoparticle sizes and their conjugates with the Pc were studied using ThermoGravimetric Analysis (TGA), Fourier Transform Infrared spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and powder X-ray diffractometry (XRD). Conjugation of ZnTCPPc to the magnetic nanoparticles, proved to have a negligible effect on the photophysical parameters of the phthalocyanine, where a slight decrease in fluorescence and triplet quantum yields and lifetimes was observed. The singlet oxygen quantum yield, however, increased slightly upon conjugation, suggesting that the overall efficiency of the ZnTCPPc as a photosensitizer had improved. Physical mixing of the ZnTCPPc and the silica-coated gadolinium nanoparticles also showed an improvement in the singlet oxygen quantum yield and triplet lifetime, also showing an enhanced efficiency for the photosensitizer and therefore photocatalysis. ZnTCPPc (3) alone and the Pc-gadolinium oxide nanoparticle conjugate (4) were therefore electrospun into nanofibers to create a solid support. The fibers were characterized and their diameter sizes and composition was studied confirming the incorporation of the phthalocyanine and gadolinium oxide nanoparticle. Increased singlet oxygen generation resulted in increased Photodegradation of the environmental pollutant Orange G and the fibers were found to be more efficient as photocatalysts compared to the photosensitizer in solution. The nanomaterial may therefore be applied to the photodegradation of Orange G.
- Full Text:
- Date Issued: 2014
- Authors: Ledwaba, Mpho
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54610 , vital:26593
- Description: This work presents the syntheses, photophysical and photochemical characterization of zinc tetracarboxyphenoxy phthalocyanine (ZnTCPPc, 3) and its gadolinium oxide nanoparticle conjugate (4). By means of spectroscopic and microscopic characterization, the conjugation of the ZnTCPPc to the silica coated gadolinium oxide nanoparticles (Si-Gd2O3 NPs, 2) through an amide bond was confirmed. The thermal stability, morphology, nanoparticle sizes and their conjugates with the Pc were studied using ThermoGravimetric Analysis (TGA), Fourier Transform Infrared spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and powder X-ray diffractometry (XRD). Conjugation of ZnTCPPc to the magnetic nanoparticles, proved to have a negligible effect on the photophysical parameters of the phthalocyanine, where a slight decrease in fluorescence and triplet quantum yields and lifetimes was observed. The singlet oxygen quantum yield, however, increased slightly upon conjugation, suggesting that the overall efficiency of the ZnTCPPc as a photosensitizer had improved. Physical mixing of the ZnTCPPc and the silica-coated gadolinium nanoparticles also showed an improvement in the singlet oxygen quantum yield and triplet lifetime, also showing an enhanced efficiency for the photosensitizer and therefore photocatalysis. ZnTCPPc (3) alone and the Pc-gadolinium oxide nanoparticle conjugate (4) were therefore electrospun into nanofibers to create a solid support. The fibers were characterized and their diameter sizes and composition was studied confirming the incorporation of the phthalocyanine and gadolinium oxide nanoparticle. Increased singlet oxygen generation resulted in increased Photodegradation of the environmental pollutant Orange G and the fibers were found to be more efficient as photocatalysts compared to the photosensitizer in solution. The nanomaterial may therefore be applied to the photodegradation of Orange G.
- Full Text:
- Date Issued: 2014
Electrospun sorbents for solid phase extraction (SPE) and colorimetric detection of pesticides
- Authors: Gulamussen, Noor Jehan
- Date: 2014
- Subjects: Sorbents , Electrospinning , Extraction (Chemistry) , Colorimetry , Pesticides , Water -- Pesticide content -- Research
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4501 , http://hdl.handle.net/10962/d1013241
- Description: The thesis presents the evaluation of polysulfone sorbents for solid phase extraction (SPE) and the development of colorimetric probes for pesticides analysis in water. Through electrospraying and electrospinning techniques, different morphologies of sorbents (particles, beaded fibers and bead-free fibers) were fabricated. The sorbents were morphologically characterized by scanning electron microscopy. Adsorption capacities of sorbents were evaluated by conducting recoveries studies for model pesticides; atrazine, chlorpyrifos and DDT using batch and column SPE modes. Better recovery results were achieved by employing the batch mode of fibers, as values ranged from 98 to 105percent. Further sorbent evaluation was conducted using breakthrough experiments and static experiments. The breakthrough studies indicated that 1700 μL was the sample volume that could be percolated with no breakthrough of the analyte that correspond to a concentration of 150 mg/g of sorbent that can be extracted without any loss of analyte. From static studies, quantities of each model compound adsorbed into the fiber at the equilibrium time were evaluated. The adsorbed atrazine was 65, chlorpyrifos 250 and DDT 400 mg/g of sorbent. Kinetic studies suggested retention mechanism following pseudo first and second order model observed by high correlation coefficients (> 0. 96), demonstrating the fiber affinity to retain both polar and non-polar compounds opening a possibility to be used as sorbent for sample preparation of different classes of pesticides in water. For the second part of the study simple strategies for colorimetric sensing based on silver nanoparticles and polivinylpyrrolidone capped nanoparticles were developed, respectively for atrazine and chlorpyrifos detection. The limits of detection of the methods were 3.32 and 0.88 mg/L for atrazine and chlorpyrifos respectively. The applicability of the probe in real samples was demonstrated by the recoveries studies of tap water varying from 94 to 104 percent. The versatility of the probe was demonstrated by affording a simple, rapid and selective detection of atrazine and chlorpyrifos in the presence of other pesticides by direct analysis without employing any sample handling steps. Attempt to incorporate the probes in a solid support was achieved by using nylon 6 as solid support polymer proving to be fast and useful for on-site detection.
- Full Text:
- Date Issued: 2014
- Authors: Gulamussen, Noor Jehan
- Date: 2014
- Subjects: Sorbents , Electrospinning , Extraction (Chemistry) , Colorimetry , Pesticides , Water -- Pesticide content -- Research
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4501 , http://hdl.handle.net/10962/d1013241
- Description: The thesis presents the evaluation of polysulfone sorbents for solid phase extraction (SPE) and the development of colorimetric probes for pesticides analysis in water. Through electrospraying and electrospinning techniques, different morphologies of sorbents (particles, beaded fibers and bead-free fibers) were fabricated. The sorbents were morphologically characterized by scanning electron microscopy. Adsorption capacities of sorbents were evaluated by conducting recoveries studies for model pesticides; atrazine, chlorpyrifos and DDT using batch and column SPE modes. Better recovery results were achieved by employing the batch mode of fibers, as values ranged from 98 to 105percent. Further sorbent evaluation was conducted using breakthrough experiments and static experiments. The breakthrough studies indicated that 1700 μL was the sample volume that could be percolated with no breakthrough of the analyte that correspond to a concentration of 150 mg/g of sorbent that can be extracted without any loss of analyte. From static studies, quantities of each model compound adsorbed into the fiber at the equilibrium time were evaluated. The adsorbed atrazine was 65, chlorpyrifos 250 and DDT 400 mg/g of sorbent. Kinetic studies suggested retention mechanism following pseudo first and second order model observed by high correlation coefficients (> 0. 96), demonstrating the fiber affinity to retain both polar and non-polar compounds opening a possibility to be used as sorbent for sample preparation of different classes of pesticides in water. For the second part of the study simple strategies for colorimetric sensing based on silver nanoparticles and polivinylpyrrolidone capped nanoparticles were developed, respectively for atrazine and chlorpyrifos detection. The limits of detection of the methods were 3.32 and 0.88 mg/L for atrazine and chlorpyrifos respectively. The applicability of the probe in real samples was demonstrated by the recoveries studies of tap water varying from 94 to 104 percent. The versatility of the probe was demonstrated by affording a simple, rapid and selective detection of atrazine and chlorpyrifos in the presence of other pesticides by direct analysis without employing any sample handling steps. Attempt to incorporate the probes in a solid support was achieved by using nylon 6 as solid support polymer proving to be fast and useful for on-site detection.
- Full Text:
- Date Issued: 2014
Fabrication, characterization and application of phthalocyanine-magnetite hybrid nanofibers
- Authors: Modisha, Phillimon Mokanne
- Date: 2014
- Subjects: Nanofibers , Nanoparticles , Magnetite
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4500 , http://hdl.handle.net/10962/d1013223
- Description: Magnetic nanoparticles comprising magnetite (Fe3O4) were functionalized with 3-aminopropyl-triethoxysilane forming amino functionalized magnetite nanoparticles (AMNPs). The amino group allows for conjugation with zinc octacarboxyphthalocyanine (ZnOCPc) or zinc tetracarboxyphthalocyanine (ZnTCPc) via the carboxyl group to form an amide bond. A reduced aggregation of ZnTCPc is observed after conjugation with AMNPs. The thermal stability, conjugation, morphology and the sizes of the nanoparticles and their conjugates were confirmed using thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and Powder X-ray diffractometry (PXRD), respectively. The covalent linkage of AMNPs to ZnOCPc or ZnTCPc resulted in improvement in the photophysical behavior of the phthalocyanines. Improvement in the triplet quantum yield (ΦT), singlet oxygen quantum yield (ΦΔ), triplet lifetime (τT) and singlet oxygen lifetime (τΔ) of the ZnOCPc or ZnTCPc were observed, hence improving the photosensitizers efficiency. The conjugates comprising of zinc octacarboxyphthalocyanine (ZnOCPc) and AMNPs were electrospun into fibers using polyamide-6 (PA-6). This was used for the photodegradation of Orange-G and compared with ZnOCPc-AMNPs in suspension. For ZnOCPc-AMNPs in suspension, it is noteworthy that the catalyst can be easily recovered using an external magnetic field. The singlet oxygen generation increases as we increase the fiber diameter by increasing the ZnOCPc concentration. The singlet oxygen quantum yield is higher for PA-6/ZnOCPc-AMNPs nanofibers when compared to PA-6/ZnOCPc. The rate of degradation of Orange-G increased with an increase in the singlet oxygen quantum yield. Moreover, the kinetic analysis showed that the photodecomposition of Orange-G is a first-order reaction according to the Langmuir-Hinshelwood model.
- Full Text:
- Date Issued: 2014
- Authors: Modisha, Phillimon Mokanne
- Date: 2014
- Subjects: Nanofibers , Nanoparticles , Magnetite
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4500 , http://hdl.handle.net/10962/d1013223
- Description: Magnetic nanoparticles comprising magnetite (Fe3O4) were functionalized with 3-aminopropyl-triethoxysilane forming amino functionalized magnetite nanoparticles (AMNPs). The amino group allows for conjugation with zinc octacarboxyphthalocyanine (ZnOCPc) or zinc tetracarboxyphthalocyanine (ZnTCPc) via the carboxyl group to form an amide bond. A reduced aggregation of ZnTCPc is observed after conjugation with AMNPs. The thermal stability, conjugation, morphology and the sizes of the nanoparticles and their conjugates were confirmed using thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and Powder X-ray diffractometry (PXRD), respectively. The covalent linkage of AMNPs to ZnOCPc or ZnTCPc resulted in improvement in the photophysical behavior of the phthalocyanines. Improvement in the triplet quantum yield (ΦT), singlet oxygen quantum yield (ΦΔ), triplet lifetime (τT) and singlet oxygen lifetime (τΔ) of the ZnOCPc or ZnTCPc were observed, hence improving the photosensitizers efficiency. The conjugates comprising of zinc octacarboxyphthalocyanine (ZnOCPc) and AMNPs were electrospun into fibers using polyamide-6 (PA-6). This was used for the photodegradation of Orange-G and compared with ZnOCPc-AMNPs in suspension. For ZnOCPc-AMNPs in suspension, it is noteworthy that the catalyst can be easily recovered using an external magnetic field. The singlet oxygen generation increases as we increase the fiber diameter by increasing the ZnOCPc concentration. The singlet oxygen quantum yield is higher for PA-6/ZnOCPc-AMNPs nanofibers when compared to PA-6/ZnOCPc. The rate of degradation of Orange-G increased with an increase in the singlet oxygen quantum yield. Moreover, the kinetic analysis showed that the photodecomposition of Orange-G is a first-order reaction according to the Langmuir-Hinshelwood model.
- Full Text:
- Date Issued: 2014
Synthesis and characterization of NaYGdF4 upconversion nanoparticles and an investigation of their effects on the spectroscopic properties of two phthalocyanine dyes
- Authors: Taylor, Jessica Mary
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54621 , vital:26594
- Description: Sphere and star shaped NaYGdF4:Yb/Er(Tm) upconversion nanoparticles were successfully synthesized utilizing a methanol assisted thermal decomposition approach and their chemical, spectroscopic and fluorescence properties were fully characterized. In addition, their influence on the spectroscopic and fluorescence properties of two phthalocyanines (Pcs) (unsubstituted tetrathiophenoxy phthalocyanine (H2Pc) and aluminium octacarboxy phthalocyanine (Cl)AlOCPc) was investigated. Upconversion nanoparticles were found to produce characteristic upconversion fluorescence emissions in the blue, green, red and NIR regions and were also shown to possess paramagnetic properties. Simple mixing with an H2Pc in toluene was found to exert no change on the spectroscopic or fluorescence properties of the Pc while covalent conjugation to a (Cl)AlOCPc resulted in a large Q band blue shift accompanied by a decrease in fluorescence lifetimes in DMSO. The red light excitation mediated singlet oxygen generation of the H2Pc mixed with upconversion nanoparticles was investigated and singlet oxygen fluorescence lifetimes were found to decrease in the presence of the nanoparticles. Upconversion mediated singlet oxygen generation, by way of resonance energy transfer to the Pc, was also attempted using 972 nm excitation; however, no singlet oxygen was detected utilizing singlet oxygen NIR emission detection. Pending further work using alternative singlet oxygen detection methods, this suggests that while upconversion nanoparticles possess excellent fluorescent imaging capabilities, they are relatively inefficient in inducing singlet oxygen production simply when mixed with phthalocyanines. Despite this, by combining phthalocyanines and upconversion nanoparticles, we present a system capable of: multimodal imaging, using both upconversion and phthalocyanines emissions, singlet oxygen generation, via direct excitation of the phthalocyanine with red laser light, and, possibly, magnetic resonance imaging, as a result of doping the upconversion nanoparticles with Gd3+ ions.
- Full Text:
- Date Issued: 2014
- Authors: Taylor, Jessica Mary
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54621 , vital:26594
- Description: Sphere and star shaped NaYGdF4:Yb/Er(Tm) upconversion nanoparticles were successfully synthesized utilizing a methanol assisted thermal decomposition approach and their chemical, spectroscopic and fluorescence properties were fully characterized. In addition, their influence on the spectroscopic and fluorescence properties of two phthalocyanines (Pcs) (unsubstituted tetrathiophenoxy phthalocyanine (H2Pc) and aluminium octacarboxy phthalocyanine (Cl)AlOCPc) was investigated. Upconversion nanoparticles were found to produce characteristic upconversion fluorescence emissions in the blue, green, red and NIR regions and were also shown to possess paramagnetic properties. Simple mixing with an H2Pc in toluene was found to exert no change on the spectroscopic or fluorescence properties of the Pc while covalent conjugation to a (Cl)AlOCPc resulted in a large Q band blue shift accompanied by a decrease in fluorescence lifetimes in DMSO. The red light excitation mediated singlet oxygen generation of the H2Pc mixed with upconversion nanoparticles was investigated and singlet oxygen fluorescence lifetimes were found to decrease in the presence of the nanoparticles. Upconversion mediated singlet oxygen generation, by way of resonance energy transfer to the Pc, was also attempted using 972 nm excitation; however, no singlet oxygen was detected utilizing singlet oxygen NIR emission detection. Pending further work using alternative singlet oxygen detection methods, this suggests that while upconversion nanoparticles possess excellent fluorescent imaging capabilities, they are relatively inefficient in inducing singlet oxygen production simply when mixed with phthalocyanines. Despite this, by combining phthalocyanines and upconversion nanoparticles, we present a system capable of: multimodal imaging, using both upconversion and phthalocyanines emissions, singlet oxygen generation, via direct excitation of the phthalocyanine with red laser light, and, possibly, magnetic resonance imaging, as a result of doping the upconversion nanoparticles with Gd3+ ions.
- Full Text:
- Date Issued: 2014
Synthesis of chromium carbene scaffolds for use in medicinal chemistry
- Rafael, Christopher Carlos Ferreira
- Authors: Rafael, Christopher Carlos Ferreira
- Date: 2014
- Subjects: Carbenes (Methylene compounds) , Pharmaceutical chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4456 , http://hdl.handle.net/10962/d1010863 , Carbenes (Methylene compounds) , Pharmaceutical chemistry
- Description: This study involves using methyllithium to synthesize Fischer carbene complexes as precursors for metal templated α,β-unsaturated complexes with potential as acceptors in the Baylis Hillman reaction as well as in Dötz benzannulation. Fischer carbene complexes contain low oxidation state metal centers, are electrophilic in nature and are stabilized by π-donating substituents such as alkoxy and amino groups. The increased electron withdrawing nature of the metal carbonyl moiety was expected to improve the rates of reaction compared to organic carbonyls. Four Fischer carbenes were synthesized via nucleophilic addition of MeLi to chromium and tungsten hexacarbonyl at low temperatures followed by alkylation using either a Meerwein salt (Me₃OBF₄) to give the desired Fischer metal methyl methoxy carbenes or Et₄NBr/alkylhalide to make the corresponding ethoxy and allyloxy carbenes. Characterization was by means of ¹³C NMR, ¹H NMR, and IR. In silico studies were carried out looking at the effect of substituents on the carbene bond. Synthesis of α,β-unsaturated complexes was effected via the aldol condensation route and found to be unfavorable using enolizable aldehydes, although the use of two aryl aldehydes resulted in successful preparation of two α,β-unsaturated complexes. Difficulty in the purification of these complexes hindered their full characterization. Computational studies looked at the effect of substituents on the system as well as variation of the metal from Cr to Mo and W. Synthesis of Baylis Hillman adducts using α,β-unsaturated complexes as acceptors was unsuccessful due to the ease of product oxidization. One potential product was obtained in its crude form although purification was not possible due to oxidation. Computational studies suggested that the oxygen on the ligand negatively impacts the stability of these Fischer carbene derived Baylis Hillman adducts promoting intramolecular oxidation of the metal. The α,β-unsaturated complexes and Baylis Hillman adducts were considered to be candidates to undergo Dötz benzannulation methodology. The use of the α,β-unsaturated complexes in this reaction was generally unsuccessful, both in the microwave and in conventional reflux conditions. Computational studies of these compounds were carried out to facilitate understanding of their stability and configuration.
- Full Text:
- Date Issued: 2014
- Authors: Rafael, Christopher Carlos Ferreira
- Date: 2014
- Subjects: Carbenes (Methylene compounds) , Pharmaceutical chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4456 , http://hdl.handle.net/10962/d1010863 , Carbenes (Methylene compounds) , Pharmaceutical chemistry
- Description: This study involves using methyllithium to synthesize Fischer carbene complexes as precursors for metal templated α,β-unsaturated complexes with potential as acceptors in the Baylis Hillman reaction as well as in Dötz benzannulation. Fischer carbene complexes contain low oxidation state metal centers, are electrophilic in nature and are stabilized by π-donating substituents such as alkoxy and amino groups. The increased electron withdrawing nature of the metal carbonyl moiety was expected to improve the rates of reaction compared to organic carbonyls. Four Fischer carbenes were synthesized via nucleophilic addition of MeLi to chromium and tungsten hexacarbonyl at low temperatures followed by alkylation using either a Meerwein salt (Me₃OBF₄) to give the desired Fischer metal methyl methoxy carbenes or Et₄NBr/alkylhalide to make the corresponding ethoxy and allyloxy carbenes. Characterization was by means of ¹³C NMR, ¹H NMR, and IR. In silico studies were carried out looking at the effect of substituents on the carbene bond. Synthesis of α,β-unsaturated complexes was effected via the aldol condensation route and found to be unfavorable using enolizable aldehydes, although the use of two aryl aldehydes resulted in successful preparation of two α,β-unsaturated complexes. Difficulty in the purification of these complexes hindered their full characterization. Computational studies looked at the effect of substituents on the system as well as variation of the metal from Cr to Mo and W. Synthesis of Baylis Hillman adducts using α,β-unsaturated complexes as acceptors was unsuccessful due to the ease of product oxidization. One potential product was obtained in its crude form although purification was not possible due to oxidation. Computational studies suggested that the oxygen on the ligand negatively impacts the stability of these Fischer carbene derived Baylis Hillman adducts promoting intramolecular oxidation of the metal. The α,β-unsaturated complexes and Baylis Hillman adducts were considered to be candidates to undergo Dötz benzannulation methodology. The use of the α,β-unsaturated complexes in this reaction was generally unsuccessful, both in the microwave and in conventional reflux conditions. Computational studies of these compounds were carried out to facilitate understanding of their stability and configuration.
- Full Text:
- Date Issued: 2014
- «
- ‹
- 1
- ›
- »