Spectroscopic and electrochemical characterization of thio binuclear phthalocyanine complexes
- Authors: Makinde, Zainab Olusola
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/59287 , vital:27541
- Description: Expected release date-April 2019
- Full Text:
- Date Issued: 2017
- Authors: Makinde, Zainab Olusola
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/59287 , vital:27541
- Description: Expected release date-April 2019
- Full Text:
- Date Issued: 2017
Spectroscopic and nonlinear optical characterisation of alpha substituted binuclear phthalocyanines
- Authors: Ngubeni, Grace Nomthandazo
- Date: 2017
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/5038 , vital:20757
- Full Text:
- Date Issued: 2017
- Authors: Ngubeni, Grace Nomthandazo
- Date: 2017
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/5038 , vital:20757
- Full Text:
- Date Issued: 2017
Synthesis and bioassay of rationally designed DXR inhibitors as potential antimalarial lead compounds
- Authors: Nokalipa, Iviwe Cwaita
- Date: 2017
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/4888 , vital:20740
- Description: Globally, the eradication of malaria has been challenging due to the problem of resistance that past and currently available drugs exhibit. This is exacerbated by the inherent need for anti-malarial drugs to be affordable to the poverty-stricken majority that is primarily affected by this burden. This research has focused on the development of potential inhibitors of 1-deoxy-D- xylulose-5 phosphate reductoisomerase (DXR), an essential enzyme in the mevalonate- independent pathway for the biosynthesis of isoprenoids in Plasmodium falciparum. DXR mediates the isomerisation and reduction of 1-deoxy-D-xylulose-5-phosphate into 2-C- methyl-D-erithrytol 4-phosphate. This enzyme has been determined to be a target for the development of novel antimalarial agents and extensive molecular modelling has been undertaken to develop inhibitors that fit into the DXR active site. The in silico docking data have been used to inform the design and synthesis of various N-benzyl-substituted phosphoramidate ligands that were determined to have potential as novel substrate mimics of fosmidomycin, a known DXR inhibitor. Synthesis of the N-benzyl-substituted phosphoramidate ligands involved a nine-step sequence commencing from diethyl phosphoramidate. In all, some 40 compounds have been prepared, some of them new, and were fully characterized using NMR. Attention has also been given to the mass spectrometric fragmentation patterns exhibited by selected intermediates. Four of the final products were evaluated for in vitro antimalarial activity using a PLDH assay and exhibited IC50 values < 100 µM.
- Full Text:
- Date Issued: 2017
- Authors: Nokalipa, Iviwe Cwaita
- Date: 2017
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/4888 , vital:20740
- Description: Globally, the eradication of malaria has been challenging due to the problem of resistance that past and currently available drugs exhibit. This is exacerbated by the inherent need for anti-malarial drugs to be affordable to the poverty-stricken majority that is primarily affected by this burden. This research has focused on the development of potential inhibitors of 1-deoxy-D- xylulose-5 phosphate reductoisomerase (DXR), an essential enzyme in the mevalonate- independent pathway for the biosynthesis of isoprenoids in Plasmodium falciparum. DXR mediates the isomerisation and reduction of 1-deoxy-D-xylulose-5-phosphate into 2-C- methyl-D-erithrytol 4-phosphate. This enzyme has been determined to be a target for the development of novel antimalarial agents and extensive molecular modelling has been undertaken to develop inhibitors that fit into the DXR active site. The in silico docking data have been used to inform the design and synthesis of various N-benzyl-substituted phosphoramidate ligands that were determined to have potential as novel substrate mimics of fosmidomycin, a known DXR inhibitor. Synthesis of the N-benzyl-substituted phosphoramidate ligands involved a nine-step sequence commencing from diethyl phosphoramidate. In all, some 40 compounds have been prepared, some of them new, and were fully characterized using NMR. Attention has also been given to the mass spectrometric fragmentation patterns exhibited by selected intermediates. Four of the final products were evaluated for in vitro antimalarial activity using a PLDH assay and exhibited IC50 values < 100 µM.
- Full Text:
- Date Issued: 2017
Synthesis and evaluation of arylpyrrole-chalcone hybrids as antiplasmodial and antitrypanosomal agents
- Authors: Zulu, Ayanda Ignatia
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/65268 , vital:28716
- Description: Expected release date-May 2019
- Full Text:
- Date Issued: 2017
- Authors: Zulu, Ayanda Ignatia
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/65268 , vital:28716
- Description: Expected release date-May 2019
- Full Text:
- Date Issued: 2017
Synthesis and photophysical studies of crown ether-bodipy dyes and the fabrication of bodipy embedded fluorescent nanofibers
- Authors: Stone, Justin
- Date: 2017
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/4953 , vital:20746
- Description: This study has three major objectives: 1) to synthesize a series of structurally related BODIPY dyes, 2) to fabricate BODIPY embedded electrospun nanofibers, and 3) to investigate and characterize the photophysical properties of all synthesized BODIPY dyes with a special focus on their ability to generate singlet oxygen. This thesis first explores the acid catalysed condensation reaction to produce two structurally analogous meso-substituted BODIPY dyes based on cuminaldehyde and 4-dimethylaminobenzaldehdye. In order to enhance the rate of ISC and promote the generation of reactive oxygen species bromine atoms were then attached to the BODIPY 2,6-positions. These BODIPY dyes were then embedded in a polystyrene solution and electrospun into nanofibers. The resulting nanofibers were found to be highly fluorescent, but were no longer able to generate singlet oxygen. Ion-sensitive BODIPYs were prepared from the dibrominated BODIPY dyes by employing a modified Knoevenagel condensation reaction to form a styryl bond with 4’-formylbenzo-15-crown-5 at the 3,5-position of the BODIPY core. Changes in the morphology and position of the absorption and emission spectra of these crown ether-styryl BODIPY dyes were observed in the presence of sodium ions. These results imply that crown ether-substituted BODIPY dyes could function as ion sensors.
- Full Text:
- Date Issued: 2017
- Authors: Stone, Justin
- Date: 2017
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/4953 , vital:20746
- Description: This study has three major objectives: 1) to synthesize a series of structurally related BODIPY dyes, 2) to fabricate BODIPY embedded electrospun nanofibers, and 3) to investigate and characterize the photophysical properties of all synthesized BODIPY dyes with a special focus on their ability to generate singlet oxygen. This thesis first explores the acid catalysed condensation reaction to produce two structurally analogous meso-substituted BODIPY dyes based on cuminaldehyde and 4-dimethylaminobenzaldehdye. In order to enhance the rate of ISC and promote the generation of reactive oxygen species bromine atoms were then attached to the BODIPY 2,6-positions. These BODIPY dyes were then embedded in a polystyrene solution and electrospun into nanofibers. The resulting nanofibers were found to be highly fluorescent, but were no longer able to generate singlet oxygen. Ion-sensitive BODIPYs were prepared from the dibrominated BODIPY dyes by employing a modified Knoevenagel condensation reaction to form a styryl bond with 4’-formylbenzo-15-crown-5 at the 3,5-position of the BODIPY core. Changes in the morphology and position of the absorption and emission spectra of these crown ether-styryl BODIPY dyes were observed in the presence of sodium ions. These results imply that crown ether-substituted BODIPY dyes could function as ion sensors.
- Full Text:
- Date Issued: 2017
Synthesis and physicochemical evaluation of a series of boron dipyrromethene dye derivatives for potential utility in antimicrobial photodynamic therapy and nonlinear optics
- Authors: Kubheka, Gugu Patience
- Date: 2017
- Subjects: Dyes and dyeing -- Chemistry , Photochemotherapy , Cancer -- Photochemotherapy , Anti-infective agents , Nonlinear optics , BODIPY
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/4776 , vital:20723
- Description: A series of new BODIPY dye derivatives have been synthesized and characterized using various characterization tools such as 1H-NMR, MALDI-TOF mass spectrometry, FT-IR, UV-visible spectrophotometry and elemental analysis. The aniline-substituted BODIPY derivative was further coordinated with gold nanorods and the characterization was achieved by transmission electron microscopy (TEM), X-ray diffractometry (XRD) and X-ray photoelectron spectroscopy (XPS).In addition to this dye, quaternized BODIPY dyes were also synthesized and investigated for their potential utility as photosentitizers in antimicrobial photodynamic therapy (APDT).BODIPY dyes with pyrene substituted styryl groups were embedded in polymer thin film using poly(bisphenol A carbonate) (PBC) to study their optical limiting properties. The optical limiting values of these BODIPY dyes once embedded in thin films were found to be greatly improved and the limiting intensityof each film was well below the maximum threshold which is set to be 0.95 J.cm-². The physicochemical properties and NLO parameters of all of the synthesized dyes were investigated.
- Full Text:
- Date Issued: 2017
- Authors: Kubheka, Gugu Patience
- Date: 2017
- Subjects: Dyes and dyeing -- Chemistry , Photochemotherapy , Cancer -- Photochemotherapy , Anti-infective agents , Nonlinear optics , BODIPY
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/4776 , vital:20723
- Description: A series of new BODIPY dye derivatives have been synthesized and characterized using various characterization tools such as 1H-NMR, MALDI-TOF mass spectrometry, FT-IR, UV-visible spectrophotometry and elemental analysis. The aniline-substituted BODIPY derivative was further coordinated with gold nanorods and the characterization was achieved by transmission electron microscopy (TEM), X-ray diffractometry (XRD) and X-ray photoelectron spectroscopy (XPS).In addition to this dye, quaternized BODIPY dyes were also synthesized and investigated for their potential utility as photosentitizers in antimicrobial photodynamic therapy (APDT).BODIPY dyes with pyrene substituted styryl groups were embedded in polymer thin film using poly(bisphenol A carbonate) (PBC) to study their optical limiting properties. The optical limiting values of these BODIPY dyes once embedded in thin films were found to be greatly improved and the limiting intensityof each film was well below the maximum threshold which is set to be 0.95 J.cm-². The physicochemical properties and NLO parameters of all of the synthesized dyes were investigated.
- Full Text:
- Date Issued: 2017
Synthesis of indium and lead phthalocyanine as photocatalysts for photodynamic antimicrobial chemotherapy and photo-oxidation of pollutants
- Authors: Oluwole, Oluyinka David
- Date: 2017
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/5293 , vital:20805
- Full Text:
- Date Issued: 2017
- Authors: Oluwole, Oluyinka David
- Date: 2017
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/5293 , vital:20805
- Full Text:
- Date Issued: 2017
Synthesis of indium and lead phthalocyanine as photocatalysts for photodynamic antimicrobial chemotherapy and photo-oxidation of pollutants
- Authors: Osifeko, Olawale L
- Date: 2017
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/5221 , vital:20790
- Description: This thesis explores the synthesis of metallophthalocyanines as potential photosensitizers for application in photodynamic antimicrobial chemotherapy and phototransformation of environmental pollutants. The metallophthalocyanines containing amino substituent were conjugated with magnetic nanoparticle and semiconductor quantum dots via an amide bond and by chemisorption onto gold nanoparticles surface. Techniques such as time-resolved fluorescence measurements, transmission electron microscopy, X-ray photoelectron spectroscopy (XPS), elemental analysis, fourier transform infrared (FTIR), nuclear magnetic resonance (¹H, ¹³C, and cozy of symmetrical phthalocyanine), electronic spectroscopy, as well as mass spectroscopy were employed to characterize all metallophthalocyanines. Quarternized pyridyloxy substituted phthalocyanine and asymmetric (AB3) metallophthalocyanines were embedded in electrospun polystyrene fiber. General trends are described for quantum yields of fluorescence, triplet, singlet oxygen and photodegradation as well as lifetimes of fluorescence and triplet state of the compounds. There is an increase in triplet quantum yield for Pcs in the presence of gold nanoparticles (AuNPs) and semiconductor quantum dots (QDs), but not in the presence of magnetic nanoparticles (MNPs). Photodynamic inactivation of Escherichia coli with the quarternized photosensitizers at low concentrations totally inactivate the bacteria compared to non-charged photosensitiser. Also, a similar trend was observed for the magnetic nanoparticles conjugates. Photooxidations of bisphenol A and 4-chlorophenol were carried out in this study using two asymmetric Indium(III) phthalocyanines photosensitizers. The photooxidation reactions were compared with those of a symmetrical indium(III) phthalocyanines containing four quaternized 4-pyridyloxy substituents. The complexes were embedded in electrospun polystyrene fiber for heterogeneous photocatalysis. The immobilized photosensitizers possess good singlet oxygen generation potentials in aqueous media. The asymmetrical phthalocyanine containing 4-pyridylsulfanyl and one aminophenoxy showed the best photocatalytic behavior.
- Full Text:
- Date Issued: 2017
- Authors: Osifeko, Olawale L
- Date: 2017
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/5221 , vital:20790
- Description: This thesis explores the synthesis of metallophthalocyanines as potential photosensitizers for application in photodynamic antimicrobial chemotherapy and phototransformation of environmental pollutants. The metallophthalocyanines containing amino substituent were conjugated with magnetic nanoparticle and semiconductor quantum dots via an amide bond and by chemisorption onto gold nanoparticles surface. Techniques such as time-resolved fluorescence measurements, transmission electron microscopy, X-ray photoelectron spectroscopy (XPS), elemental analysis, fourier transform infrared (FTIR), nuclear magnetic resonance (¹H, ¹³C, and cozy of symmetrical phthalocyanine), electronic spectroscopy, as well as mass spectroscopy were employed to characterize all metallophthalocyanines. Quarternized pyridyloxy substituted phthalocyanine and asymmetric (AB3) metallophthalocyanines were embedded in electrospun polystyrene fiber. General trends are described for quantum yields of fluorescence, triplet, singlet oxygen and photodegradation as well as lifetimes of fluorescence and triplet state of the compounds. There is an increase in triplet quantum yield for Pcs in the presence of gold nanoparticles (AuNPs) and semiconductor quantum dots (QDs), but not in the presence of magnetic nanoparticles (MNPs). Photodynamic inactivation of Escherichia coli with the quarternized photosensitizers at low concentrations totally inactivate the bacteria compared to non-charged photosensitiser. Also, a similar trend was observed for the magnetic nanoparticles conjugates. Photooxidations of bisphenol A and 4-chlorophenol were carried out in this study using two asymmetric Indium(III) phthalocyanines photosensitizers. The photooxidation reactions were compared with those of a symmetrical indium(III) phthalocyanines containing four quaternized 4-pyridyloxy substituents. The complexes were embedded in electrospun polystyrene fiber for heterogeneous photocatalysis. The immobilized photosensitizers possess good singlet oxygen generation potentials in aqueous media. The asymmetrical phthalocyanine containing 4-pyridylsulfanyl and one aminophenoxy showed the best photocatalytic behavior.
- Full Text:
- Date Issued: 2017
Synthesis, characterisation and evaluation of benzoxaborole-based hybrids as antiplasmodial agents
- Authors: Gumbo, Maureen
- Date: 2017
- Subjects: Malaria Chemotherapy , Antimalarials , Boron compounds , Drug resistance , Plasmodium falciparum , Drug development
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/59193 , vital:27456
- Description: Malaria is a mosquito-borne disease, which continues to pose a threat to the entire humanity. About 40% of the world population is estimated to be at risk of infections by malaria. Despite efforts undertaken by scientific community, government entities and international organizations, malaria is still rampant. The major problem is drug resistance, where the Plasmodium spp have over the past decades developed drug resistance against available drugs. In order to counter this problem, novel antimalarial drugs that are efficacious and with novel mode of action are of great necessity. Benzoxaborole derivatives have been shown to exhibit promising antimalarial activity against Plasmodium falciparum strains. Previous studies reported on the compounds such as 6-(2- (alkoxycarbonyl)pyrazinyl-5-oxy)-1,3-dihydro-1-hydroxy-2,1-benzoxaboroles, which showed good antimalarial activity against both W7 and 3D7 strains without significant toxicity. On the other hand, chloroquine (CQ) and cinnamic acids have a wide variety of biological activity including antimalarial activity. Herein, a hybridisation strategy was employed to synthesise new CQ-benzoxaborole and cinnamoyl-benzoxaborole hybrids. CQ-Benzoxaborole 2.12a-c and cinnamoylbenzoxaborole 2.11a-g hydrid molecules were synthesised in low to good yields. Their structural identities were confirmed using conventional spectroscopic techniques (1H and 13C NMR, and mass spectrometry). CQ-benzoxaborole compounds, however, showed instability, and only 2.12b was used for in vitro biological assay and showed activity comparable to CQ. Furthermore, in vitro biological assay revealed that compounds 2.11a-g poorly inhibited the growth of P. falciparum parasites. Interestingly, these compounds, however, exhibited satisfactory activity against Trypanosoma brucei with IC50 = 0.052 μM for compound 2.11g. The cell cytotoxicity assay of all final compounds confirmed that all CQ-benzoxaborole 2.12b and cinnamoyl-benzoxaborole 2.11a-g hybrids were non-toxic against HeLa cell lines. However, efforts to further expand the structure-activity relationship (SAR) of CQbenzoxaborole by increasing the length of the linker with one extra carbon (Scheme 2.10) were not possible as an important precursor 6-formylbenzoxaborole 2.29 could not be synthesized in sufficient yields. , Thesis (MSc) -- Faculty of Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
- Authors: Gumbo, Maureen
- Date: 2017
- Subjects: Malaria Chemotherapy , Antimalarials , Boron compounds , Drug resistance , Plasmodium falciparum , Drug development
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/59193 , vital:27456
- Description: Malaria is a mosquito-borne disease, which continues to pose a threat to the entire humanity. About 40% of the world population is estimated to be at risk of infections by malaria. Despite efforts undertaken by scientific community, government entities and international organizations, malaria is still rampant. The major problem is drug resistance, where the Plasmodium spp have over the past decades developed drug resistance against available drugs. In order to counter this problem, novel antimalarial drugs that are efficacious and with novel mode of action are of great necessity. Benzoxaborole derivatives have been shown to exhibit promising antimalarial activity against Plasmodium falciparum strains. Previous studies reported on the compounds such as 6-(2- (alkoxycarbonyl)pyrazinyl-5-oxy)-1,3-dihydro-1-hydroxy-2,1-benzoxaboroles, which showed good antimalarial activity against both W7 and 3D7 strains without significant toxicity. On the other hand, chloroquine (CQ) and cinnamic acids have a wide variety of biological activity including antimalarial activity. Herein, a hybridisation strategy was employed to synthesise new CQ-benzoxaborole and cinnamoyl-benzoxaborole hybrids. CQ-Benzoxaborole 2.12a-c and cinnamoylbenzoxaborole 2.11a-g hydrid molecules were synthesised in low to good yields. Their structural identities were confirmed using conventional spectroscopic techniques (1H and 13C NMR, and mass spectrometry). CQ-benzoxaborole compounds, however, showed instability, and only 2.12b was used for in vitro biological assay and showed activity comparable to CQ. Furthermore, in vitro biological assay revealed that compounds 2.11a-g poorly inhibited the growth of P. falciparum parasites. Interestingly, these compounds, however, exhibited satisfactory activity against Trypanosoma brucei with IC50 = 0.052 μM for compound 2.11g. The cell cytotoxicity assay of all final compounds confirmed that all CQ-benzoxaborole 2.12b and cinnamoyl-benzoxaborole 2.11a-g hybrids were non-toxic against HeLa cell lines. However, efforts to further expand the structure-activity relationship (SAR) of CQbenzoxaborole by increasing the length of the linker with one extra carbon (Scheme 2.10) were not possible as an important precursor 6-formylbenzoxaborole 2.29 could not be synthesized in sufficient yields. , Thesis (MSc) -- Faculty of Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
Synthesis, characterisation and evaluation of ferrocene-containing Novobiocin analogues for anticancer and antiplasmodial activity through inhibition of Hsp90
- Authors: Mbaba, Mziyanda
- Date: 2017
- Subjects: Antibiotics Synthesis , Ferrocene , Heat shock proteins , Antimalarials , Cancer Chemotherapy
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65111 , vital:28690
- Description: Novobiocin (Nb) is a coumarin type antibiotic isolated from the bacterium species of Streptomyces and possesses modest anticancer and antimalarial activities. Nb and analogues have been extensively explored as potential anticancer agents through inhibition of the C- terminal domain of heat shock protein 90 (Hsp90), which plays a pivotal role in the proteinfolding machinery of cells. There has been little effort in the exploration of Nb and derivatives for antimalarial activity. Incorporation of organometallic units, such as ferrocene (Fc), into bioactive chemical scaffolds remains an attractive approach for developing new therapeutic agents for treatment of several ailments. The current study sought to investigate the anticancer and antiplasmodial effects of incorporating ferrocene (Fc) into Nb scaffold presumably through inhibition of Hsp90. The ferrocenyl Nb analogues containing simplified structural motifs such as phenyl, benzyl, and piperidine were synthesized in six to nine steps employing conventional synthetic organic protocols adapted from literature, and the compounds were accessed in reasonable yields. For comparison purposes, a selection of organic Nb analogues were also included in the study. The target compounds were characterized by spectroscopic techniques including 1-dimensional nuclear magnetic resonance (1D NMR) and high-resolution mass spectroscopy. The synthesized compounds were evaluated in vitro for potential anticancer and antiplasmodial activities using the breast cancer cell line (HCC38) and chloroquine-sensitive strain (3D7) of the malaria parasite, Plasmodium falciparum. The presence of the Fc unit was found to enhance both anticancer and antiplasmodial activities of the resultant ferrocenyl Nb compounds with IC50 values in the low to mid micromolar range. Hsp90 inhibitory studies of the ferrocenyl Nb analogues possessing superior activities (2.13a and 2.20c) were also conducted using different yeast strains expressing both human and malarial Hsp90 isoforms: hHsp90a/p and PfHsp90, respectively. The results of Hsp90 inhibitory studies suggested no direct correlation between the observed activities of the analogues and Hsp90 inhibition. However, since the conditions of the assay were not optimised due to time constrains of the project, these observed data remained to be confirmed. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
- Authors: Mbaba, Mziyanda
- Date: 2017
- Subjects: Antibiotics Synthesis , Ferrocene , Heat shock proteins , Antimalarials , Cancer Chemotherapy
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65111 , vital:28690
- Description: Novobiocin (Nb) is a coumarin type antibiotic isolated from the bacterium species of Streptomyces and possesses modest anticancer and antimalarial activities. Nb and analogues have been extensively explored as potential anticancer agents through inhibition of the C- terminal domain of heat shock protein 90 (Hsp90), which plays a pivotal role in the proteinfolding machinery of cells. There has been little effort in the exploration of Nb and derivatives for antimalarial activity. Incorporation of organometallic units, such as ferrocene (Fc), into bioactive chemical scaffolds remains an attractive approach for developing new therapeutic agents for treatment of several ailments. The current study sought to investigate the anticancer and antiplasmodial effects of incorporating ferrocene (Fc) into Nb scaffold presumably through inhibition of Hsp90. The ferrocenyl Nb analogues containing simplified structural motifs such as phenyl, benzyl, and piperidine were synthesized in six to nine steps employing conventional synthetic organic protocols adapted from literature, and the compounds were accessed in reasonable yields. For comparison purposes, a selection of organic Nb analogues were also included in the study. The target compounds were characterized by spectroscopic techniques including 1-dimensional nuclear magnetic resonance (1D NMR) and high-resolution mass spectroscopy. The synthesized compounds were evaluated in vitro for potential anticancer and antiplasmodial activities using the breast cancer cell line (HCC38) and chloroquine-sensitive strain (3D7) of the malaria parasite, Plasmodium falciparum. The presence of the Fc unit was found to enhance both anticancer and antiplasmodial activities of the resultant ferrocenyl Nb compounds with IC50 values in the low to mid micromolar range. Hsp90 inhibitory studies of the ferrocenyl Nb analogues possessing superior activities (2.13a and 2.20c) were also conducted using different yeast strains expressing both human and malarial Hsp90 isoforms: hHsp90a/p and PfHsp90, respectively. The results of Hsp90 inhibitory studies suggested no direct correlation between the observed activities of the analogues and Hsp90 inhibition. However, since the conditions of the assay were not optimised due to time constrains of the project, these observed data remained to be confirmed. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
Synthesis, characterisation and evaluation of novel ferrocene-thiazole derivatives as antiplasmodial agents
- Authors: Hakizimana, Emmanuel Victor
- Date: 2017
- Subjects: Plasmodium , Malaria -- Chemotherapy , Plasmodium falciparum , Plasmodium -- Inhibitors , Drug resistance in microorganisms , Thiaszoles
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/5304 , vital:20807
- Description: Malaria is mosquito-transmitted disease which continues to pose threat to humanity, despite the efforts undertaken by the scientific community, government entities and international organizations. The major problem is that Plasmodium species have developed resistance against available drugs. In order to counter this problem, antimalarial drugs that are efficacious and with novel mode of action are of great necessity. Thiazole derivatives, in particular aminomethylthiazole analogues, have been shown to exhibit promising antimalarial activity against Plasmodium falciparum strains. Previous studies reported the hit compound MMV010539, which showed good antimalarial activity against both K1 (CQ and multidrug resistant strains) and NF54 (CQ sensitive strain). In this study, MMV010539 was deemed to be as an attractive compound to generate novel analogues by addition of ferrocenyl organometallic unit. The ferrocene based compounds have shown biological activity; and with ferroquine currently in clinical trials there has been increasing research into identifying new ferrocenyl-containing molecules as potential antimalarial agents. Herein, thiazole ferrocene based molecules 3.22a-e were synthesised in low to good yields. Their structural identities were confirmed using conventional spectroscopic techniques (¹H and ¹³C NMR, FT-IR spectroscopy and mass spectrometry). The cell cytotoxicity assay of all final compounds confirmed that all ferrocene-thiazole blends 3.22a-e were non-toxic against HeLa cell lines. However, the in vitro biological assay revealed that despite the absence of cell cytotoxicity these compounds poorly inhibited the growth of Plasmodium falciparum parasite. As the aim was to expand further the structure-activity relationship (SAR) of MMV010539, this study confirmed the previous findings that there is a limited structural modification that could be accommodated as indicated in Figure 3.3 (Panel C). Moreover, the combination of ferrocenyl moiety and various alkylamines resulted in compounds with poor antiplasmodial potency, further suggesting that the free amine (Panel A, Figure 3.3) is important for activity.
- Full Text:
- Date Issued: 2017
- Authors: Hakizimana, Emmanuel Victor
- Date: 2017
- Subjects: Plasmodium , Malaria -- Chemotherapy , Plasmodium falciparum , Plasmodium -- Inhibitors , Drug resistance in microorganisms , Thiaszoles
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/5304 , vital:20807
- Description: Malaria is mosquito-transmitted disease which continues to pose threat to humanity, despite the efforts undertaken by the scientific community, government entities and international organizations. The major problem is that Plasmodium species have developed resistance against available drugs. In order to counter this problem, antimalarial drugs that are efficacious and with novel mode of action are of great necessity. Thiazole derivatives, in particular aminomethylthiazole analogues, have been shown to exhibit promising antimalarial activity against Plasmodium falciparum strains. Previous studies reported the hit compound MMV010539, which showed good antimalarial activity against both K1 (CQ and multidrug resistant strains) and NF54 (CQ sensitive strain). In this study, MMV010539 was deemed to be as an attractive compound to generate novel analogues by addition of ferrocenyl organometallic unit. The ferrocene based compounds have shown biological activity; and with ferroquine currently in clinical trials there has been increasing research into identifying new ferrocenyl-containing molecules as potential antimalarial agents. Herein, thiazole ferrocene based molecules 3.22a-e were synthesised in low to good yields. Their structural identities were confirmed using conventional spectroscopic techniques (¹H and ¹³C NMR, FT-IR spectroscopy and mass spectrometry). The cell cytotoxicity assay of all final compounds confirmed that all ferrocene-thiazole blends 3.22a-e were non-toxic against HeLa cell lines. However, the in vitro biological assay revealed that despite the absence of cell cytotoxicity these compounds poorly inhibited the growth of Plasmodium falciparum parasite. As the aim was to expand further the structure-activity relationship (SAR) of MMV010539, this study confirmed the previous findings that there is a limited structural modification that could be accommodated as indicated in Figure 3.3 (Panel C). Moreover, the combination of ferrocenyl moiety and various alkylamines resulted in compounds with poor antiplasmodial potency, further suggesting that the free amine (Panel A, Figure 3.3) is important for activity.
- Full Text:
- Date Issued: 2017
Synthesis, characterisation and evaluation of novel ferrocene-thiazole derivatives as antiplasmodial agents
- Authors: Hakizimana, Emmanuel Victor
- Date: 2017
- Subjects: Plasmodium , Malaria -- Chemotherapy , Plasmodium falciparum , Plasmodium -- Inhibitors , Drug resistance in microorganisms , Thiaszoles
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/96068 , vital:31232
- Description: Malaria is mosquito-transmitted disease which continues to pose threat to humanity, despite the efforts undertaken by the scientific community, government entities and international organizations. The major problem is that Plasmodium species have developed resistance against available drugs. In order to counter this problem, antimalarial drugs that are efficacious and with novel mode of action are of great necessity. Thiazole derivatives, in particular aminomethylthiazole analogues, have been shown to exhibit promising antimalarial activity against Plasmodium falciparum strains. Previous studies reported the hit compound MMV010539, which showed good antimalarial activity against both K1 (CQ and multidrug resistant strains) and NF54 (CQ sensitive strain). In this study, MMV010539 was deemed to be as an attractive compound to generate novel analogues by addition of ferrocenyl organometallic unit. The ferrocene based compounds have shown biological activity; and with ferroquine currently in clinical trials there has been increasing research into identifying new ferrocenyl-containing molecules as potential antimalarial agents. Herein, thiazole ferrocene based molecules 3.22a-e were synthesised in low to good yields. Their structural identities were confirmed using conventional spectroscopic techniques (¹H and ¹³C NMR, FT-IR spectroscopy and mass spectrometry). The cell cytotoxicity assay of all final compounds confirmed that all ferrocene-thiazole blends 3.22a-e were non-toxic against HeLa cell lines. However, the in vitro biological assay revealed that despite the absence of cell cytotoxicity these compounds poorly inhibited the growth of Plasmodium falciparum parasite. As the aim was to expand further the structure-activity relationship (SAR) of MMV010539, this study confirmed the previous findings that there is a limited structural modification that could be accommodated as indicated in Figure 3.3 (Panel C). Moreover, the combination of ferrocenyl moiety and various alkylamines resulted in compounds with poor antiplasmodial potency, further suggesting that the free amine (Panel A, Figure 3.3) is important for activity.
- Full Text:
- Date Issued: 2017
- Authors: Hakizimana, Emmanuel Victor
- Date: 2017
- Subjects: Plasmodium , Malaria -- Chemotherapy , Plasmodium falciparum , Plasmodium -- Inhibitors , Drug resistance in microorganisms , Thiaszoles
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/96068 , vital:31232
- Description: Malaria is mosquito-transmitted disease which continues to pose threat to humanity, despite the efforts undertaken by the scientific community, government entities and international organizations. The major problem is that Plasmodium species have developed resistance against available drugs. In order to counter this problem, antimalarial drugs that are efficacious and with novel mode of action are of great necessity. Thiazole derivatives, in particular aminomethylthiazole analogues, have been shown to exhibit promising antimalarial activity against Plasmodium falciparum strains. Previous studies reported the hit compound MMV010539, which showed good antimalarial activity against both K1 (CQ and multidrug resistant strains) and NF54 (CQ sensitive strain). In this study, MMV010539 was deemed to be as an attractive compound to generate novel analogues by addition of ferrocenyl organometallic unit. The ferrocene based compounds have shown biological activity; and with ferroquine currently in clinical trials there has been increasing research into identifying new ferrocenyl-containing molecules as potential antimalarial agents. Herein, thiazole ferrocene based molecules 3.22a-e were synthesised in low to good yields. Their structural identities were confirmed using conventional spectroscopic techniques (¹H and ¹³C NMR, FT-IR spectroscopy and mass spectrometry). The cell cytotoxicity assay of all final compounds confirmed that all ferrocene-thiazole blends 3.22a-e were non-toxic against HeLa cell lines. However, the in vitro biological assay revealed that despite the absence of cell cytotoxicity these compounds poorly inhibited the growth of Plasmodium falciparum parasite. As the aim was to expand further the structure-activity relationship (SAR) of MMV010539, this study confirmed the previous findings that there is a limited structural modification that could be accommodated as indicated in Figure 3.3 (Panel C). Moreover, the combination of ferrocenyl moiety and various alkylamines resulted in compounds with poor antiplasmodial potency, further suggesting that the free amine (Panel A, Figure 3.3) is important for activity.
- Full Text:
- Date Issued: 2017
Tetra 4-(propargyloxy)phenoxy phthalocyanines: synthesis, spectroscopic, nonlinear optical and electrocatalytic properties
- Authors: Mwanza, Daniel
- Date: 2017
- Subjects: Phthalocyanines , Nonlinear optics , Electrocatalysis , Spectrum analysis , Thermogravimetry , Phthalocyanines Spectra
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65144 , vital:28695
- Description: This study presents the synthesis, spectroscopic, photophysical and theoretical characterisation of metal-free (H2TPrOPhOPc), cobalt (CoTPrOPhOPc) and manganese (MnTPrOPhOPc) tetra 4-(4-propargyloxy) phenoxy phthalocyanines. Thermal analysis using thermogravimetric analysis (TGA) confirmed the excellent thermal stability of synthesized tetra 4-(4- propargyloxy) phenoxy phthalocyanines. The metal complexes, CoTPrOPhOPc and MnTPrOPhOPc, exhibited better thermal stability when compared to H2TPrOPhOPc. The residual percentage weight remaining was approximately 70% for CoTPrOPhOPc and MnTPrOPhOPc and 45% for H2TPrOPhOPc after 600°C, clearly confirming the stability of the metal complexes. The MTPrOPhOPcs (where M = H2, Co and Mn) complexes exhibited excellent nonlinear optical properties with strong reverse saturable absorption (RSA), especially when 560 nm excitation laser was used. Their nonlinear optical properties followed this trend: H2TPrOPhOPc > CoTPrOPhOPc > MnTPrOPhOPc. According to the trend observed, the H2TPrOPhOPc was an excellent nonlinear optical limiter when compared to the CoTPrOPhOPc and MnTPrOPhOPc. All the investigated complexes exhibited optical limiting properties comparable to the phthalocyanine complexes reported in the literature. The MTPrOPhOPc complexes were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. For the electrocatalytic studies, the synthesized complexes were immobilized onto gold electrode surfaces pre-functionalized with phenylazide (Au-PAz) monolayer. Copper (I) catalyzed alkynyl-azide cycloaddition reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs modified gold surfaces (Au-PAz-MTPrOPhOPc) exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and surface characterisation of the functionalised gold electrode surfaces confirmed the presence of the MTPrOPhOPcs and their electroanalysis was excellent towards electrocatalytic reduction of H2O2, with the limit of detection (LoD) and limit of quantification (LoQ) in the ^M range. The electrocatalytic reduction peaks for H2O2 were observed at -0.37 V for Au-PAz-MnTPrOPhOPc and -0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-MnTPrOPhOPc and Au- PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
- Authors: Mwanza, Daniel
- Date: 2017
- Subjects: Phthalocyanines , Nonlinear optics , Electrocatalysis , Spectrum analysis , Thermogravimetry , Phthalocyanines Spectra
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65144 , vital:28695
- Description: This study presents the synthesis, spectroscopic, photophysical and theoretical characterisation of metal-free (H2TPrOPhOPc), cobalt (CoTPrOPhOPc) and manganese (MnTPrOPhOPc) tetra 4-(4-propargyloxy) phenoxy phthalocyanines. Thermal analysis using thermogravimetric analysis (TGA) confirmed the excellent thermal stability of synthesized tetra 4-(4- propargyloxy) phenoxy phthalocyanines. The metal complexes, CoTPrOPhOPc and MnTPrOPhOPc, exhibited better thermal stability when compared to H2TPrOPhOPc. The residual percentage weight remaining was approximately 70% for CoTPrOPhOPc and MnTPrOPhOPc and 45% for H2TPrOPhOPc after 600°C, clearly confirming the stability of the metal complexes. The MTPrOPhOPcs (where M = H2, Co and Mn) complexes exhibited excellent nonlinear optical properties with strong reverse saturable absorption (RSA), especially when 560 nm excitation laser was used. Their nonlinear optical properties followed this trend: H2TPrOPhOPc > CoTPrOPhOPc > MnTPrOPhOPc. According to the trend observed, the H2TPrOPhOPc was an excellent nonlinear optical limiter when compared to the CoTPrOPhOPc and MnTPrOPhOPc. All the investigated complexes exhibited optical limiting properties comparable to the phthalocyanine complexes reported in the literature. The MTPrOPhOPc complexes were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. For the electrocatalytic studies, the synthesized complexes were immobilized onto gold electrode surfaces pre-functionalized with phenylazide (Au-PAz) monolayer. Copper (I) catalyzed alkynyl-azide cycloaddition reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs modified gold surfaces (Au-PAz-MTPrOPhOPc) exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and surface characterisation of the functionalised gold electrode surfaces confirmed the presence of the MTPrOPhOPcs and their electroanalysis was excellent towards electrocatalytic reduction of H2O2, with the limit of detection (LoD) and limit of quantification (LoQ) in the ^M range. The electrocatalytic reduction peaks for H2O2 were observed at -0.37 V for Au-PAz-MnTPrOPhOPc and -0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-MnTPrOPhOPc and Au- PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
The effects of graphene and other nanomaterials on the electrocatalytic behaviour of phthalocyanines
- Authors: Shumba, Munyaradzi
- Date: 2017
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/37952 , vital:24712
- Description: Carbon based nanomaterials, gold nanorods and metallophthalocyanine nanoconjugates have been developed for electrocatalysis. Carbon based nanomaterials used are multiwalled carbon nanotubes, pristine graphene oxide nanosheets, nitrogen, boron, sulphur, phosphorus doped graphene oxide nanosheets. Cobalt phthalocyanine (CoPc), cobalt tetra aminophenoxy phthalocyanine (CoTAPc), cobalt tetra aminophenoxy phthalocyanine (CoTAPhPc), cobalt mono carboxyphenoxy phthalocyanine (CoMCPhPc) and cobalt tetra carboxyphenoxy phthalocyanine (CoTCPhPc) are the phthalocyanines employed in this work. Metallophthalocyanines were employed either in their bulk form or in their nanosized form. Electrode modification by these nanomaterials was either done sequentially, premixed or linked nanoconjugates. In all sequential modification, phthalocyanines were employed on top of other nanomaterials. Sequentially modified electrodes gave higher detection currents than both premixed and covalently bonded nanoconjugates. The nanomaterials reported here were characterised by transmission electron microscopy, Raman spectroscopy, time of flight secondary ion mass spectrometry, and X-ray diffraction among other techniques. The modified electrodes were further characterised by scanning electron microscopy, scanning electrochemical microscopy, X-ray photoelectron spectroscopy and cyclic voltammetry, while square wave, linear scan and cyclic voltammetry, rotating disc electrode and chronoamperometry have been used to evaluate the electrocatalytic behaviour of the previously mentioned towards either oxidation or reduction of L-cysteine and/or hydrogen peroxide respectively. Generally, the nanoconjugates resulted in superior catalytic performance compared to the performance of individual nanomaterials. Zinc octacarboxy phthalocyanine (ZnOCPc) conjugated to either GONS or rGONS were employed to compare electrocatalytic detection of hydrogen peroxide to its luminescence sensing.
- Full Text:
- Date Issued: 2017
The effects of graphene and other nanomaterials on the electrocatalytic behaviour of phthalocyanines
- Authors: Shumba, Munyaradzi
- Date: 2017
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/37952 , vital:24712
- Description: Carbon based nanomaterials, gold nanorods and metallophthalocyanine nanoconjugates have been developed for electrocatalysis. Carbon based nanomaterials used are multiwalled carbon nanotubes, pristine graphene oxide nanosheets, nitrogen, boron, sulphur, phosphorus doped graphene oxide nanosheets. Cobalt phthalocyanine (CoPc), cobalt tetra aminophenoxy phthalocyanine (CoTAPc), cobalt tetra aminophenoxy phthalocyanine (CoTAPhPc), cobalt mono carboxyphenoxy phthalocyanine (CoMCPhPc) and cobalt tetra carboxyphenoxy phthalocyanine (CoTCPhPc) are the phthalocyanines employed in this work. Metallophthalocyanines were employed either in their bulk form or in their nanosized form. Electrode modification by these nanomaterials was either done sequentially, premixed or linked nanoconjugates. In all sequential modification, phthalocyanines were employed on top of other nanomaterials. Sequentially modified electrodes gave higher detection currents than both premixed and covalently bonded nanoconjugates. The nanomaterials reported here were characterised by transmission electron microscopy, Raman spectroscopy, time of flight secondary ion mass spectrometry, and X-ray diffraction among other techniques. The modified electrodes were further characterised by scanning electron microscopy, scanning electrochemical microscopy, X-ray photoelectron spectroscopy and cyclic voltammetry, while square wave, linear scan and cyclic voltammetry, rotating disc electrode and chronoamperometry have been used to evaluate the electrocatalytic behaviour of the previously mentioned towards either oxidation or reduction of L-cysteine and/or hydrogen peroxide respectively. Generally, the nanoconjugates resulted in superior catalytic performance compared to the performance of individual nanomaterials. Zinc octacarboxy phthalocyanine (ZnOCPc) conjugated to either GONS or rGONS were employed to compare electrocatalytic detection of hydrogen peroxide to its luminescence sensing.
- Full Text:
- Date Issued: 2017
Electrode surface modification using iron(II) phthalocyanine immobilized via electrografting and click chemistry and clicked onto azide-functionalized quantum dots: applications in electrocatalysis
- Authors: Nxele, Siphesihle Robin
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/3464 , vital:20501
- Description: Tetrakis(5-hexynoxy)Fe(II) phthalocyanine was used alone and in combination with quantum dots (QDs) in order to test the electrocatalytic ability with hydrazine and paraquat as the analytes of interest. This novel phthalocaynine was successfully synthesised and characterized using various characterisation techniques. The QDs used were the well-known core-shell CdSe/ZnS nanostructures. The fabrication of glassy carbon electrodes involved covalent attachment by electrochemical grafting and click chemistry for the first part of the work and the second part involved the conjugation of the synthesised QDs and the phthalocyanine by click chemistry. This approach of conjugating these nanostructures introduced another aspect of novelty to the work reported in this thesis. The immobilisation of this conjugate on a glassy carbon electrode (GCE) was achieved by adsorption. Characterisation techniques such as infrared spectroscopy, x-ray diffractometry, UV/vis spectroscopy, transmission electron microscopy and x-ray photoelectron spectroscopy were used to characterise the molecules and conjugates of interest. With respect to the electrocatalytic part of the work, electrode surface characterisation involved scanning electrochemical microscopy and cyclic voltammetry to determine changes in the nature of the surface as well as reactivity of the surface at different modification steps. Detection limits and the sensitivity determined for the electrocatalysts fabricated here proved to be an improvement compared to other reported work involving phthalocyanines and the test analytes chosen for application. With respect to the conjugate, the electrocatalytic ability was improved when the QDs and phthalocyanine were combined using click chemistry compared to using the phthalocyanine alone.
- Full Text:
- Date Issued: 2016
- Authors: Nxele, Siphesihle Robin
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/3464 , vital:20501
- Description: Tetrakis(5-hexynoxy)Fe(II) phthalocyanine was used alone and in combination with quantum dots (QDs) in order to test the electrocatalytic ability with hydrazine and paraquat as the analytes of interest. This novel phthalocaynine was successfully synthesised and characterized using various characterisation techniques. The QDs used were the well-known core-shell CdSe/ZnS nanostructures. The fabrication of glassy carbon electrodes involved covalent attachment by electrochemical grafting and click chemistry for the first part of the work and the second part involved the conjugation of the synthesised QDs and the phthalocyanine by click chemistry. This approach of conjugating these nanostructures introduced another aspect of novelty to the work reported in this thesis. The immobilisation of this conjugate on a glassy carbon electrode (GCE) was achieved by adsorption. Characterisation techniques such as infrared spectroscopy, x-ray diffractometry, UV/vis spectroscopy, transmission electron microscopy and x-ray photoelectron spectroscopy were used to characterise the molecules and conjugates of interest. With respect to the electrocatalytic part of the work, electrode surface characterisation involved scanning electrochemical microscopy and cyclic voltammetry to determine changes in the nature of the surface as well as reactivity of the surface at different modification steps. Detection limits and the sensitivity determined for the electrocatalysts fabricated here proved to be an improvement compared to other reported work involving phthalocyanines and the test analytes chosen for application. With respect to the conjugate, the electrocatalytic ability was improved when the QDs and phthalocyanine were combined using click chemistry compared to using the phthalocyanine alone.
- Full Text:
- Date Issued: 2016
Gold nanoparticle–based colorimetric probes for dopamine detection
- Authors: Ngomane, Nokuthula
- Date: 2016
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4565 , http://hdl.handle.net/10962/d1021261
- Description: Colorimetric probes have become important tools in analysis and biomedical technology. This thesis reports on the development of such probes for the detection of dopamine (DA). Liquid and different solid state probes were developed utilizing un–functionalized gold nanoparticles (UF–AuNPs). The liquid state probe is based on the growth and aggregation of the UF–AuNPs in the presence of DA. Upon addition of the UF–AuNPs to various concentrations of DA, the shape, size and colour change results in spectral shifts from lower to higher wavelengths. The analyte can be easily monitored by the naked eye from 5.0 nM DA with a calculated limit of detection of 2.5 nM (3σ) under optimal pH. Ascorbic acid (AA) has a potential to interfere with DA detection in solution since it is often present in biological fluids, but in this case the interference was limited to solutions where its concentration was beyond 200 times greater than that of DA. Since most of the previously reported colorimetric probes, especially those for DA are solution based, the main focus of the thesis was in the development of a solid state based colorimetric probe in the form of nanofibre mats. To overcome the interference challenges experienced in the solution studies (the interference by high concentrations of AA), the suitability of molecularly imprinted polymers (MIPs) for the selective detection of DA was investigated. The results showed that the MIPs produced did not play a significant role in enhancing the selectivity towards DA. A probe composed of just the UF–AuNPs and Nylon–6 (UF–AuNPs + N6) was also developed. The UF–AuNPs were synthesized following an in situ reduction method. The probe was only selective to DA and insensitive to other catecholamines at physiological pH. Thus, the probe did not require any addition functionalities to achieve selectivity and sensitive to DA. The liquid state probe and the composite UF–AuNPs + N6 nanofibre probe were successfully applied to a whole blood sample and showed good selectivity towards DA. The simple, sensitive and selective probe could be an excellent alternative for on–site and immediate detection of DA without the use of instrumentation. For quantification of DA using the solid state probe, open–source software imageJ was used to assist in the analysis of the nanofibre colours. It was observed that the intensity of the colour increased with the increase in concentration of DA in a linear fashion. The use of imageJ can also be a great alternative where the colour changes are not so clear or for visually impaired people. The solid state probe developed can detect DA qualitatively and quantitatively. The work also forms a good foundation for development of such probes for other analyte.
- Full Text:
- Date Issued: 2016
- Authors: Ngomane, Nokuthula
- Date: 2016
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4565 , http://hdl.handle.net/10962/d1021261
- Description: Colorimetric probes have become important tools in analysis and biomedical technology. This thesis reports on the development of such probes for the detection of dopamine (DA). Liquid and different solid state probes were developed utilizing un–functionalized gold nanoparticles (UF–AuNPs). The liquid state probe is based on the growth and aggregation of the UF–AuNPs in the presence of DA. Upon addition of the UF–AuNPs to various concentrations of DA, the shape, size and colour change results in spectral shifts from lower to higher wavelengths. The analyte can be easily monitored by the naked eye from 5.0 nM DA with a calculated limit of detection of 2.5 nM (3σ) under optimal pH. Ascorbic acid (AA) has a potential to interfere with DA detection in solution since it is often present in biological fluids, but in this case the interference was limited to solutions where its concentration was beyond 200 times greater than that of DA. Since most of the previously reported colorimetric probes, especially those for DA are solution based, the main focus of the thesis was in the development of a solid state based colorimetric probe in the form of nanofibre mats. To overcome the interference challenges experienced in the solution studies (the interference by high concentrations of AA), the suitability of molecularly imprinted polymers (MIPs) for the selective detection of DA was investigated. The results showed that the MIPs produced did not play a significant role in enhancing the selectivity towards DA. A probe composed of just the UF–AuNPs and Nylon–6 (UF–AuNPs + N6) was also developed. The UF–AuNPs were synthesized following an in situ reduction method. The probe was only selective to DA and insensitive to other catecholamines at physiological pH. Thus, the probe did not require any addition functionalities to achieve selectivity and sensitive to DA. The liquid state probe and the composite UF–AuNPs + N6 nanofibre probe were successfully applied to a whole blood sample and showed good selectivity towards DA. The simple, sensitive and selective probe could be an excellent alternative for on–site and immediate detection of DA without the use of instrumentation. For quantification of DA using the solid state probe, open–source software imageJ was used to assist in the analysis of the nanofibre colours. It was observed that the intensity of the colour increased with the increase in concentration of DA in a linear fashion. The use of imageJ can also be a great alternative where the colour changes are not so clear or for visually impaired people. The solid state probe developed can detect DA qualitatively and quantitatively. The work also forms a good foundation for development of such probes for other analyte.
- Full Text:
- Date Issued: 2016
Improved singlet oxygen generation by a novel bodipy dye and a study of upconverison nanoparticles mixed with a functionalized bodipy compound
- Wildervanck, Martijn Johannes
- Authors: Wildervanck, Martijn Johannes
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/3718 , vital:20538
- Description: This research explores the use of the versatile 4,4-difluoro-4-boro-3a,4a-diaza-s-indacene (BODIPY) dyes and the modification of their spectroscopic properties. The synthesis of a tetramethyl-BODIPY bearing a sterically hindered meso-phenyl ring with an ethynyl functional group at the para-position was compared to that of its freely rotating counterpart with no methyl substituents on the BODIPY core, with the fluorescence properties in particular proving to be markedly different. These phenyl-ethynyl-substituted BODIPYs were used as the starting materials for the synthesis of novel BODIPY dyes for sensor applications via Sonogashira coupling reactions at the ethynyl position, but this resulted instead in the serendipitous synthesis of a novel BODIPY dimer in which the para-positions of the meso-phenyl rings are linked by a diethynyl bridge. Following iodination at the 2, 6-positions, the dimer was found to have a singlet oxygen quantum yield of 0.88, compared to the value of 0.86 that was obtained for the analogous monomer. Since the εmax values for the main spectral bands of the dimers are significantly higher, the compounds may be of interest for singlet oxygen generation applications. A second study was carried out on the interaction between methyl ester functionalized BODIPY dyes and upconversion nanoparticles (UCNPs) to explore the possible use of BODIPY-UCNP conjugates in biomedical applications. The singlet oxygen generation properties of the BODIPY were tested following iodination at the 2, 6-positions, a singlet oxygen quantum yield value of 0.86 was obtained. Three sets of oleate capped UCNPs were synthesized with different diameters and were rendered water dispersible with the addition of a silica shell. The necessary scaffolding for conjugation to the BODIPY was provided by amine groups following functionalization of this shell. All of the sets of oleate capped and silica coated UCNPs were characterized by transmission electron microscopy (TEM) and X-ray diffractometry (XRD) and their emission properties were studied upon excitation at 978 nm with a diode laser with a Picoquant Fluotime 300 spectrophotometer that enables the measurement of anti-Stokes emission. The potential utility of UCNP-BODIPY conjugates for singlet oxygen applications, such as PDT, was then assessed.
- Full Text:
- Date Issued: 2016
- Authors: Wildervanck, Martijn Johannes
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/3718 , vital:20538
- Description: This research explores the use of the versatile 4,4-difluoro-4-boro-3a,4a-diaza-s-indacene (BODIPY) dyes and the modification of their spectroscopic properties. The synthesis of a tetramethyl-BODIPY bearing a sterically hindered meso-phenyl ring with an ethynyl functional group at the para-position was compared to that of its freely rotating counterpart with no methyl substituents on the BODIPY core, with the fluorescence properties in particular proving to be markedly different. These phenyl-ethynyl-substituted BODIPYs were used as the starting materials for the synthesis of novel BODIPY dyes for sensor applications via Sonogashira coupling reactions at the ethynyl position, but this resulted instead in the serendipitous synthesis of a novel BODIPY dimer in which the para-positions of the meso-phenyl rings are linked by a diethynyl bridge. Following iodination at the 2, 6-positions, the dimer was found to have a singlet oxygen quantum yield of 0.88, compared to the value of 0.86 that was obtained for the analogous monomer. Since the εmax values for the main spectral bands of the dimers are significantly higher, the compounds may be of interest for singlet oxygen generation applications. A second study was carried out on the interaction between methyl ester functionalized BODIPY dyes and upconversion nanoparticles (UCNPs) to explore the possible use of BODIPY-UCNP conjugates in biomedical applications. The singlet oxygen generation properties of the BODIPY were tested following iodination at the 2, 6-positions, a singlet oxygen quantum yield value of 0.86 was obtained. Three sets of oleate capped UCNPs were synthesized with different diameters and were rendered water dispersible with the addition of a silica shell. The necessary scaffolding for conjugation to the BODIPY was provided by amine groups following functionalization of this shell. All of the sets of oleate capped and silica coated UCNPs were characterized by transmission electron microscopy (TEM) and X-ray diffractometry (XRD) and their emission properties were studied upon excitation at 978 nm with a diode laser with a Picoquant Fluotime 300 spectrophotometer that enables the measurement of anti-Stokes emission. The potential utility of UCNP-BODIPY conjugates for singlet oxygen applications, such as PDT, was then assessed.
- Full Text:
- Date Issued: 2016
Nanocomposites of carbon nanomaterials and metallophthalocyanines : applications towards electrocatalysis
- Authors: Nyoni, Stephen
- Date: 2016
- Subjects: Nanocomposites (Materials) , Nanostructured materials , Electrocatalysis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4561 , http://hdl.handle.net/10962/d1020846
- Description: Nanohybrid materials have been prepared and examined for their electrocatalytic activity. The nanocomposites have been prepared from carbon nanomaterials (multiwalled carbon nanotubes (MWCNTs) and graphene nanosheets), cadmium selenide quantum dots and metallophthalocyanines (MPcs). The MPcs used in this work are cobalt tetraamino-phthalocyanine (CoTAPc) and tetra (4-(4,6-diaminopyrimidin-2-ylthio) phthalocyaninatocobalt (II)) (CoPyPc). Their activity has also been explored in different forms; polymeric MPcs, iodine doped MPcs and covalently linked MPcs. The premixed drop-dry, sequential drop-dry and electropolymerisation electrode modification techniques were used to prepare nanocomposite catalysts on the glassy carbon electrode (GCE) surface. The sequential drop dry technique for MPc and MWCNTs gave better catalytic responses in terms of limit of detection, catalytic and electron transfer rate constants relative to the premixed. MWCNTs and CdSe-QDs have been used as intercalating agents to reduce restacking of graphene nanosheets during nanocomposite preparation. Voltammetry, chronoamperometry, scanning electrochemical microscopy and electrochemical impedance spectroscopy methods are used for electrochemical characterization modified GCE. X-ray photoelectron spectroscopy, X-ray diffractometry, transmission electron microscopy, scanning electron microscopy, infra-red spectroscopy, Raman spectroscopy were used to explore surface functionalities, morphology and topography of the nanocomposites. Electrocatalytic activity and possible applications of the modified electrodes were tested using oxygen reduction reaction, l-cysteine oxidation and paraquat reduction. Activity of nanocomposites was found superior over individual nanomaterials in these applications.
- Full Text:
- Date Issued: 2016
- Authors: Nyoni, Stephen
- Date: 2016
- Subjects: Nanocomposites (Materials) , Nanostructured materials , Electrocatalysis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4561 , http://hdl.handle.net/10962/d1020846
- Description: Nanohybrid materials have been prepared and examined for their electrocatalytic activity. The nanocomposites have been prepared from carbon nanomaterials (multiwalled carbon nanotubes (MWCNTs) and graphene nanosheets), cadmium selenide quantum dots and metallophthalocyanines (MPcs). The MPcs used in this work are cobalt tetraamino-phthalocyanine (CoTAPc) and tetra (4-(4,6-diaminopyrimidin-2-ylthio) phthalocyaninatocobalt (II)) (CoPyPc). Their activity has also been explored in different forms; polymeric MPcs, iodine doped MPcs and covalently linked MPcs. The premixed drop-dry, sequential drop-dry and electropolymerisation electrode modification techniques were used to prepare nanocomposite catalysts on the glassy carbon electrode (GCE) surface. The sequential drop dry technique for MPc and MWCNTs gave better catalytic responses in terms of limit of detection, catalytic and electron transfer rate constants relative to the premixed. MWCNTs and CdSe-QDs have been used as intercalating agents to reduce restacking of graphene nanosheets during nanocomposite preparation. Voltammetry, chronoamperometry, scanning electrochemical microscopy and electrochemical impedance spectroscopy methods are used for electrochemical characterization modified GCE. X-ray photoelectron spectroscopy, X-ray diffractometry, transmission electron microscopy, scanning electron microscopy, infra-red spectroscopy, Raman spectroscopy were used to explore surface functionalities, morphology and topography of the nanocomposites. Electrocatalytic activity and possible applications of the modified electrodes were tested using oxygen reduction reaction, l-cysteine oxidation and paraquat reduction. Activity of nanocomposites was found superior over individual nanomaterials in these applications.
- Full Text:
- Date Issued: 2016
Study into the synthesis, characterisation and applications of Vanadium-based metal organic frameworks, using 1, 2, 4, 5-benzenetetracarboxylic acid
- Authors: Feldmann, Wesley
- Date: 2016
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/55245 , vital:26680
- Description: This study focussed on the synthesis, characterisation and catalytic application of synthesised vanadium-based Metal-Organic Frameworks using 1,2,4,5-benzenetetracarboxylic acid as a ligand. A number of synthetic methods were tested in multiple attempts to synthesise a V-MOF, these included; ambient, gel, reflux and solvothermal methods of synthesis. Two products of interest were identified, an ambient synthesis produced a vanadium-based complex with the empirical formula: V2O2(Na2H2B4C).6H2O (RU-V2) and a solvothermal synthesis produced a MOF with the empirical formula: V2O2(H2O)2(B4C) (RU-V1). Both products were characterised using elemental analysis, infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry and X-ray powder diffraction. The catalytic activity of these products was tested, alongside the activity of the solid decavanadate ion, for the conversion of cyclohexene to cyclohexene oxide. The decavanadate ion was included to determine if the ion was catalytically active in the solid state, to potentially be used in the construction of a future MOF or V-complex. The reaction for the conversion of cyclohexene to cyclohexene oxide was chosen, as it has been previously conducted using a V-MOF and was found to be successful. The product of the reaction, the epoxide: cyclohexene oxide, is a very useful precursor for a number of reactions involved in the pharmaceutical industry, so developing catalysts which are able to convert cyclohexene to the epoxide with high yields and selectivities are well sought after in industry. The results of the catalytic reactions were varied, as the materials exhibited high yields and selectivities to the epoxide, but these results were only obtained when water was present in the reaction mixture. Water was able to bring about the cleavage of the bonds between the metal and ligand in a highly coordinated framework, at a faster rate than other solvents, such as decane. This ultimately leads to the structural decomposition of the entire complex or framework, depending upon the reaction time. The use of water was a double edged sword in that it was required to initiate the catalytic reaction, but was also the reason that the catalytic materials were noted to decompose over time. The solid decavanadate ion was only noted to exhibit homogeneous activity by dissolving into the small volume of water present in the reaction mixture. The study proved that using a multidentate ligand such as 1,2,4,5-benzenetetracarboxylic acid yielded products which were highly coordinated in nature and would therefore not have large open spaces associated with them, which is commonly observed with other MOFs. Instead the closed nature of the synthesised complexes and frameworks offered a different environment for catalytic reactions, where the small pores/channels had a controlling and inhibiting effect on the reaction. The conversion of cyclohexene to the epoxide is accompanied with a number of undesired side products, so when using the synthesised closed-natured MOF, it was found that there was a greater selectivity for the epoxide over other potential products. This indicates that close natured MOFs may find application in catalytic reactions which require high selectivities for a particular product.
- Full Text:
- Date Issued: 2016
- Authors: Feldmann, Wesley
- Date: 2016
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/55245 , vital:26680
- Description: This study focussed on the synthesis, characterisation and catalytic application of synthesised vanadium-based Metal-Organic Frameworks using 1,2,4,5-benzenetetracarboxylic acid as a ligand. A number of synthetic methods were tested in multiple attempts to synthesise a V-MOF, these included; ambient, gel, reflux and solvothermal methods of synthesis. Two products of interest were identified, an ambient synthesis produced a vanadium-based complex with the empirical formula: V2O2(Na2H2B4C).6H2O (RU-V2) and a solvothermal synthesis produced a MOF with the empirical formula: V2O2(H2O)2(B4C) (RU-V1). Both products were characterised using elemental analysis, infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry and X-ray powder diffraction. The catalytic activity of these products was tested, alongside the activity of the solid decavanadate ion, for the conversion of cyclohexene to cyclohexene oxide. The decavanadate ion was included to determine if the ion was catalytically active in the solid state, to potentially be used in the construction of a future MOF or V-complex. The reaction for the conversion of cyclohexene to cyclohexene oxide was chosen, as it has been previously conducted using a V-MOF and was found to be successful. The product of the reaction, the epoxide: cyclohexene oxide, is a very useful precursor for a number of reactions involved in the pharmaceutical industry, so developing catalysts which are able to convert cyclohexene to the epoxide with high yields and selectivities are well sought after in industry. The results of the catalytic reactions were varied, as the materials exhibited high yields and selectivities to the epoxide, but these results were only obtained when water was present in the reaction mixture. Water was able to bring about the cleavage of the bonds between the metal and ligand in a highly coordinated framework, at a faster rate than other solvents, such as decane. This ultimately leads to the structural decomposition of the entire complex or framework, depending upon the reaction time. The use of water was a double edged sword in that it was required to initiate the catalytic reaction, but was also the reason that the catalytic materials were noted to decompose over time. The solid decavanadate ion was only noted to exhibit homogeneous activity by dissolving into the small volume of water present in the reaction mixture. The study proved that using a multidentate ligand such as 1,2,4,5-benzenetetracarboxylic acid yielded products which were highly coordinated in nature and would therefore not have large open spaces associated with them, which is commonly observed with other MOFs. Instead the closed nature of the synthesised complexes and frameworks offered a different environment for catalytic reactions, where the small pores/channels had a controlling and inhibiting effect on the reaction. The conversion of cyclohexene to the epoxide is accompanied with a number of undesired side products, so when using the synthesised closed-natured MOF, it was found that there was a greater selectivity for the epoxide over other potential products. This indicates that close natured MOFs may find application in catalytic reactions which require high selectivities for a particular product.
- Full Text:
- Date Issued: 2016
Synthesis of chiral ketopinic acid-derived catalysts and their evaluation in asymmetric transformations
- Authors: Hassan, Yusuf
- Date: 2016
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/550 , vital:19969
- Description: Four new (+)-ketopinic acid-derived Mn(III) complexes, three of which possess pseudo C2- symmetry, were synthesised as chiral catalyst candidates. The ligands were prepared by refluxing (+)-ketopinic acid with ethane-1,2-diamine, the resolved (R,R)- and (S,S)-1,2-diaminocyclohexanes, and 1,2-diaminobenzene in chloroform. Treatment of the ligands with manganese(II) acetate tetrahydrate in refluxing ethanol afforded the respective complexes as brown amorphous powders. Characterisation of the ligands and the corresponding complexes was achieved using 1-D and 2-D NMR, IR spectroscopy, and elemental analysis. Various homogeneous asymmetric transformations, were investigated using these four complexes, viz., aldol, and Baylis-Hillman reactions, aza-Michael addition of piperidine to the Baylis-Hillman adducts, epoxidation, and ketone and imine reduction. Asymmetric aldol reactions of benzaldehyde with the aryl ketones, acetophenone, propiophenone, -tetralone, 4-nitroacetophenone, and 4-methoxyacetophenone, conducted in the presence of 10 mole % of the chiral catalysts, afforded enantioselectivities of up to 99% e.e. Asymmetric Baylis-Hillman reactions of methyl- and tert-butyl acrylates with pyridine-2- carbaldehyde, 6-methylpyridine-2-carbaldehyde, 5-chlorosalicylaldehyde, benzaldehyde, 4-chlorobenzaldehyde, and 2-nitrobenzaldehyde were conducted in the presence of catalyst 139 (10 mole %) to afford enantioselectivities of up to 44% e.e. Aza-Michael addition of piperidine to racemic Baylis- Hillman adducts in the presence of the catalyst 139 (10 mole %) was found to proceed with diastereoselectivities of up to 91% d.e. Asymmetric epoxidation of trans-methyl styrene, styrene, trans-stilbene, cis-stilbene, and indene, using a 5 mole % chiral catalyst loading and m-CPBA as the oxygen source, gave enantioselectivities of up to 32 % e.e. Asymmetric reductions of acetophenone, 3-chloropropiophenone, 4-hydroxyacetophenone, -tetralone, and 2-hydroxy-1-acetonapthone were investigated using NaBH4 as the reducing agent and a 10 mole % loading of the chiral catalysts. A stereoselectivity of 68% e.e. was obtained in the reduction of acetophenone, but attempts to reduce the selected imines to the corresponding chiral amines proved to be unsuccessful — even in the absence of the catalysts. It thus became apparent that the catalytic version of the reaction was not feasible.
- Full Text:
- Date Issued: 2016
- Authors: Hassan, Yusuf
- Date: 2016
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/550 , vital:19969
- Description: Four new (+)-ketopinic acid-derived Mn(III) complexes, three of which possess pseudo C2- symmetry, were synthesised as chiral catalyst candidates. The ligands were prepared by refluxing (+)-ketopinic acid with ethane-1,2-diamine, the resolved (R,R)- and (S,S)-1,2-diaminocyclohexanes, and 1,2-diaminobenzene in chloroform. Treatment of the ligands with manganese(II) acetate tetrahydrate in refluxing ethanol afforded the respective complexes as brown amorphous powders. Characterisation of the ligands and the corresponding complexes was achieved using 1-D and 2-D NMR, IR spectroscopy, and elemental analysis. Various homogeneous asymmetric transformations, were investigated using these four complexes, viz., aldol, and Baylis-Hillman reactions, aza-Michael addition of piperidine to the Baylis-Hillman adducts, epoxidation, and ketone and imine reduction. Asymmetric aldol reactions of benzaldehyde with the aryl ketones, acetophenone, propiophenone, -tetralone, 4-nitroacetophenone, and 4-methoxyacetophenone, conducted in the presence of 10 mole % of the chiral catalysts, afforded enantioselectivities of up to 99% e.e. Asymmetric Baylis-Hillman reactions of methyl- and tert-butyl acrylates with pyridine-2- carbaldehyde, 6-methylpyridine-2-carbaldehyde, 5-chlorosalicylaldehyde, benzaldehyde, 4-chlorobenzaldehyde, and 2-nitrobenzaldehyde were conducted in the presence of catalyst 139 (10 mole %) to afford enantioselectivities of up to 44% e.e. Aza-Michael addition of piperidine to racemic Baylis- Hillman adducts in the presence of the catalyst 139 (10 mole %) was found to proceed with diastereoselectivities of up to 91% d.e. Asymmetric epoxidation of trans-methyl styrene, styrene, trans-stilbene, cis-stilbene, and indene, using a 5 mole % chiral catalyst loading and m-CPBA as the oxygen source, gave enantioselectivities of up to 32 % e.e. Asymmetric reductions of acetophenone, 3-chloropropiophenone, 4-hydroxyacetophenone, -tetralone, and 2-hydroxy-1-acetonapthone were investigated using NaBH4 as the reducing agent and a 10 mole % loading of the chiral catalysts. A stereoselectivity of 68% e.e. was obtained in the reduction of acetophenone, but attempts to reduce the selected imines to the corresponding chiral amines proved to be unsuccessful — even in the absence of the catalysts. It thus became apparent that the catalytic version of the reaction was not feasible.
- Full Text:
- Date Issued: 2016