Assessment of the prevalence of faecal coliforms and Escherichia coli o157:h7 in the final effluents of two wastewater treatment plants in Amahlathi Local Municipality of Eastern Cape Province, South Africa
- Authors: Ajibade, Adefisoye Martins
- Date: 2014
- Subjects: Sewage disposal plants , Escherichia coli -- South Africa -- Eastern Cape , Escherichia coli O157:H7 , Escherichia coli , Effluent quality -- Testing , Whole effluent toxicity testing , Water -- Purification
- Language: English
- Type: Thesis , Masters , MSc (Microbiology)
- Identifier: vital:11283 , http://hdl.handle.net/10353/d1016166 , Sewage disposal plants , Escherichia coli -- South Africa -- Eastern Cape , Escherichia coli O157:H7 , Escherichia coli , Effluent quality -- Testing , Whole effluent toxicity testing , Water -- Purification
- Description: The production of final effluents that meet discharged requirements and guidelines remain a major challenge particularly in the developing world with the resultant problem of surface water pollution. This study assessed the physicochemical and microbiological qualities of two wastewater treatment works in the Eastern Cape Province of South Africa in terms of the prevalence of faecal coliforms and Escherichia coli O157:H7 over a five month period. All physicochemical and microbiological analyses were carried out using standard methods. Data were collected in triplicates and analysed statistically using IBM SPSS version 20.0. The ranges of some of the physicochemical parameters that complied with set guidelines include pH (6.7 – 7.6), TDS (107 – 171 mg/L), EC (168 – 266 μS/cm), Temperature (15 – 24oC), NO3- (0 – 8.2 mg/L), NO2- (0.14 – 0.71 mg/L) and PO4 (1.05 – 4.50 mg/L). Others including Turbidity (2.64 – 58.00 NTU), Free Cl (0.13 – 0.65 mg/L), DO (2.20 – 8.48 mg/L), BOD (0.13 – 6.85 mg/L) and COD (40 – 482 mg/L) did not comply with set guidelines. The microbiological parameters ranged 0 – 2.7 × 104 CFU/100 ml for FC and 0 – 9.3 × 103 for EHEC CFU/100 ml, an indication of non-compliance with set guidelines. Preliminary identification of 40 randomly selected presumptive enterohemorrhagic E. coli isolates by Gram’s staining and oxidase test shows 100% (all 40 selected isolates) to be Gram positive while 90% (36 randomly selected isolates) were oxidase negative. Statistical correlation between the physicochemical and the microbiological parameters were generally weak except in the case of free chlorine and DO where they showed inverse correlation with the microbiological parameters. The recovery of EHEC showed the inefficiency of the treatment processes to effectively inactivate the bacteria, and possibly other pathogenic bacteria that may be present in the treated wastewater. The assessment suggested the need for proper monitoring and a review of the treatment procedures used at these treatment works.
- Full Text:
- Date Issued: 2014
- Authors: Ajibade, Adefisoye Martins
- Date: 2014
- Subjects: Sewage disposal plants , Escherichia coli -- South Africa -- Eastern Cape , Escherichia coli O157:H7 , Escherichia coli , Effluent quality -- Testing , Whole effluent toxicity testing , Water -- Purification
- Language: English
- Type: Thesis , Masters , MSc (Microbiology)
- Identifier: vital:11283 , http://hdl.handle.net/10353/d1016166 , Sewage disposal plants , Escherichia coli -- South Africa -- Eastern Cape , Escherichia coli O157:H7 , Escherichia coli , Effluent quality -- Testing , Whole effluent toxicity testing , Water -- Purification
- Description: The production of final effluents that meet discharged requirements and guidelines remain a major challenge particularly in the developing world with the resultant problem of surface water pollution. This study assessed the physicochemical and microbiological qualities of two wastewater treatment works in the Eastern Cape Province of South Africa in terms of the prevalence of faecal coliforms and Escherichia coli O157:H7 over a five month period. All physicochemical and microbiological analyses were carried out using standard methods. Data were collected in triplicates and analysed statistically using IBM SPSS version 20.0. The ranges of some of the physicochemical parameters that complied with set guidelines include pH (6.7 – 7.6), TDS (107 – 171 mg/L), EC (168 – 266 μS/cm), Temperature (15 – 24oC), NO3- (0 – 8.2 mg/L), NO2- (0.14 – 0.71 mg/L) and PO4 (1.05 – 4.50 mg/L). Others including Turbidity (2.64 – 58.00 NTU), Free Cl (0.13 – 0.65 mg/L), DO (2.20 – 8.48 mg/L), BOD (0.13 – 6.85 mg/L) and COD (40 – 482 mg/L) did not comply with set guidelines. The microbiological parameters ranged 0 – 2.7 × 104 CFU/100 ml for FC and 0 – 9.3 × 103 for EHEC CFU/100 ml, an indication of non-compliance with set guidelines. Preliminary identification of 40 randomly selected presumptive enterohemorrhagic E. coli isolates by Gram’s staining and oxidase test shows 100% (all 40 selected isolates) to be Gram positive while 90% (36 randomly selected isolates) were oxidase negative. Statistical correlation between the physicochemical and the microbiological parameters were generally weak except in the case of free chlorine and DO where they showed inverse correlation with the microbiological parameters. The recovery of EHEC showed the inefficiency of the treatment processes to effectively inactivate the bacteria, and possibly other pathogenic bacteria that may be present in the treated wastewater. The assessment suggested the need for proper monitoring and a review of the treatment procedures used at these treatment works.
- Full Text:
- Date Issued: 2014
Evaluation of some wastewater treatment facilities in Chris Hani and Amathole district municipalities as potential sources of Escherichia coli in the environment
- Authors: Mazwi, Sinazo Nomathamsanqa
- Date: 2014
- Subjects: Escherichia coli -- South Africa -- Eastern Cape , Water -- Purification
- Language: English
- Type: Thesis , Masters , MSc (Microbiology)
- Identifier: vital:11285 , http://hdl.handle.net/10353/d1019804 , Escherichia coli -- South Africa -- Eastern Cape , Water -- Purification
- Description: Access to clean and safe water is essential for the survival of human beings. Pollution of freshwater sources constitutes a major problem hindering access to safe water for drinking and other domestic uses. Wastewater effluent discharges often impact the microbiological qualities of surface waters with its attendant health and environmental problems. This study evaluated the microbiological qualities of the discharged effluents of four selected wastewater treatment plants in Amathole and Chris Hani District Municipalities of the Eastern Cape Province over a twelve-month sampling period. Microbiological analysis (faecal coliform, Escherichia coli and Escherichia coli O157:H7) was done using standard methods and polymerase chain reaction method was used to confirm identities ofbacterial isolates. Presumptive bacteria counts ranged as follows: faecal coliforms 0 to 1.6 × 103 CFU/100 ml, E. coli 0 to 1.4 × 103 CFU/100 ml and E. coli O157:H7 0 to 9.6 × 102 CFU/100 ml. Forty eight percent (305/626) of the presumptive E. coli isolates were confirmed using species-specific uidA gene which code for β-glucuronidase enzyme in E. coli. Antibiotic susceptibility profile of the isolate using a panel of 10 antibiotics shows 100% (150/150) resistance to antibiotics rifampicin and penicillin G while 49.3% (74/150) of the isolates and 46.7% (70/150) were susceptible to streptomycin and cefotaxime respectively. Multiple antibiotic resistance phenotypes (MARP) of the isolates showed resistance to two or more test antibiotics while the calculated multiple antibiotic resistance index (MARI) for the tested isolated is 0.49. The detection of potentially pathogenic E. coli in the final effluents suggestspotential danger to the receiving water bodies where the effluents are discharge. The high MARI valued obtained in this study indicates that the isolates are form environment where the tested antibiotics are being used and may further lead to the spread of multiple antibiotics resistance among other pathogens that may be present in the same environment.
- Full Text:
- Date Issued: 2014
- Authors: Mazwi, Sinazo Nomathamsanqa
- Date: 2014
- Subjects: Escherichia coli -- South Africa -- Eastern Cape , Water -- Purification
- Language: English
- Type: Thesis , Masters , MSc (Microbiology)
- Identifier: vital:11285 , http://hdl.handle.net/10353/d1019804 , Escherichia coli -- South Africa -- Eastern Cape , Water -- Purification
- Description: Access to clean and safe water is essential for the survival of human beings. Pollution of freshwater sources constitutes a major problem hindering access to safe water for drinking and other domestic uses. Wastewater effluent discharges often impact the microbiological qualities of surface waters with its attendant health and environmental problems. This study evaluated the microbiological qualities of the discharged effluents of four selected wastewater treatment plants in Amathole and Chris Hani District Municipalities of the Eastern Cape Province over a twelve-month sampling period. Microbiological analysis (faecal coliform, Escherichia coli and Escherichia coli O157:H7) was done using standard methods and polymerase chain reaction method was used to confirm identities ofbacterial isolates. Presumptive bacteria counts ranged as follows: faecal coliforms 0 to 1.6 × 103 CFU/100 ml, E. coli 0 to 1.4 × 103 CFU/100 ml and E. coli O157:H7 0 to 9.6 × 102 CFU/100 ml. Forty eight percent (305/626) of the presumptive E. coli isolates were confirmed using species-specific uidA gene which code for β-glucuronidase enzyme in E. coli. Antibiotic susceptibility profile of the isolate using a panel of 10 antibiotics shows 100% (150/150) resistance to antibiotics rifampicin and penicillin G while 49.3% (74/150) of the isolates and 46.7% (70/150) were susceptible to streptomycin and cefotaxime respectively. Multiple antibiotic resistance phenotypes (MARP) of the isolates showed resistance to two or more test antibiotics while the calculated multiple antibiotic resistance index (MARI) for the tested isolated is 0.49. The detection of potentially pathogenic E. coli in the final effluents suggestspotential danger to the receiving water bodies where the effluents are discharge. The high MARI valued obtained in this study indicates that the isolates are form environment where the tested antibiotics are being used and may further lead to the spread of multiple antibiotics resistance among other pathogens that may be present in the same environment.
- Full Text:
- Date Issued: 2014
Development of a visible light active, photo-catalytic and antimicrobial nanocomposite of titanium dioxide and silicon dioxide for water treatment
- Authors: Mungondori, Henry Heroe
- Date: 2012
- Subjects: Titanium dioxide , Silica , Catalysis , Nanocomposites (Materials) , Water -- Purification
- Language: English
- Type: Thesis , Masters , MSc (Chemistry)
- Identifier: vital:11335 , http://hdl.handle.net/10353/471 , Titanium dioxide , Silica , Catalysis , Nanocomposites (Materials) , Water -- Purification
- Description: The aim of this study was to prepare composite materials based on titanium dioxide (TiO2) and silicon dioxide (SiO2), and to evaluate their photo-catalytic and antimicrobial properties. Carbon and nitrogen doped TiO2nano-particles were prepared via a sol gel synthesis, which is a simple hydrolysis and condensation technique. In situ doping was carried out using glucose and urea as carbon and nitrogen sources respectively. Doping increased the spectral response of titanium dioxide photo-catalyst, allowing it to utilise the visible region which is much wider than the UV region (about 40 % of the solar spectrum), thus making it a more efficient photo-catalyst. The carbon and nitrogen doped TiO2-SiO2nano-particles were immobilized on glass support material to allow for easy separation of the spent photo-catalyst after the photo-degradation process. Tetraethyl orthosilicate (TEOS) was employed as both a binder and precursor for silicon dioxide. A mixture of TiO2 and TEOS in a 1:1 ratio was allowed to polymerize on a glass support which had been treated with hydrofluoric acid to introduce OH groups. The prepared photo-catalytic material was characterized by FT-IR, XRD, DRS, TEM, EDX, and BET analyses. Carbon was found to be more effective as a dopant than nitrogen. It brought about a band gap reduction of 0.30 eV and a BET surface area of 95.4 m2g-1 on the photo-catalyst as compared to a gap reduction of 0.2 eV and surface area of 52.2 m2g-1 for nitrogen doped TiO2. On the other hand, introduction of SiO2 allowed utilization of visible light by the TiO2-SiO2 nano-composite leading to an improved rate of photo-degradation of both methyl orange and phenol red. However, the immobilization of TiO2 on support material made it less effective towards inactivation of E. coli ATCC 25922 bacterial cells when compared to powdered TiO2 which was able to inactivate about 98 % of the bacterial cells within an hour of treatment.
- Full Text:
- Date Issued: 2012
- Authors: Mungondori, Henry Heroe
- Date: 2012
- Subjects: Titanium dioxide , Silica , Catalysis , Nanocomposites (Materials) , Water -- Purification
- Language: English
- Type: Thesis , Masters , MSc (Chemistry)
- Identifier: vital:11335 , http://hdl.handle.net/10353/471 , Titanium dioxide , Silica , Catalysis , Nanocomposites (Materials) , Water -- Purification
- Description: The aim of this study was to prepare composite materials based on titanium dioxide (TiO2) and silicon dioxide (SiO2), and to evaluate their photo-catalytic and antimicrobial properties. Carbon and nitrogen doped TiO2nano-particles were prepared via a sol gel synthesis, which is a simple hydrolysis and condensation technique. In situ doping was carried out using glucose and urea as carbon and nitrogen sources respectively. Doping increased the spectral response of titanium dioxide photo-catalyst, allowing it to utilise the visible region which is much wider than the UV region (about 40 % of the solar spectrum), thus making it a more efficient photo-catalyst. The carbon and nitrogen doped TiO2-SiO2nano-particles were immobilized on glass support material to allow for easy separation of the spent photo-catalyst after the photo-degradation process. Tetraethyl orthosilicate (TEOS) was employed as both a binder and precursor for silicon dioxide. A mixture of TiO2 and TEOS in a 1:1 ratio was allowed to polymerize on a glass support which had been treated with hydrofluoric acid to introduce OH groups. The prepared photo-catalytic material was characterized by FT-IR, XRD, DRS, TEM, EDX, and BET analyses. Carbon was found to be more effective as a dopant than nitrogen. It brought about a band gap reduction of 0.30 eV and a BET surface area of 95.4 m2g-1 on the photo-catalyst as compared to a gap reduction of 0.2 eV and surface area of 52.2 m2g-1 for nitrogen doped TiO2. On the other hand, introduction of SiO2 allowed utilization of visible light by the TiO2-SiO2 nano-composite leading to an improved rate of photo-degradation of both methyl orange and phenol red. However, the immobilization of TiO2 on support material made it less effective towards inactivation of E. coli ATCC 25922 bacterial cells when compared to powdered TiO2 which was able to inactivate about 98 % of the bacterial cells within an hour of treatment.
- Full Text:
- Date Issued: 2012
Studies on bioflocculant production by a consortium of two bacterial species belonging to the Methylobacterium and Actinobacterium genera
- Authors: Ntsaluba, Luvuyo
- Date: 2012
- Subjects: Flocculation , Actinobacteria , Methylobacterium , Water -- Purification
- Language: English
- Type: Thesis , Masters , MSc (Microbiology)
- Identifier: vital:11266 , http://hdl.handle.net/10353/482 , Flocculation , Actinobacteria , Methylobacterium , Water -- Purification
- Description: Bioflocculants produced by two identified bacteria: Actinobacterium sp. Mayor and Methylobacterium sp. Obi were investigated with regard to their physicochemical and flocculating characteristics. The two strains were later combined to form a consortium for further studies. The optimum culture conditions for the bioflocculant production were similar for all strains except in the case of Actinobacterium sp. Mayor and the consortium, where glucose was replaced by sodium carbonate as a carbon source. Multi-nitrogen source was the best nitrogen source compare to individual sources for both strains. The divalent cation, Ca2+ proved to be a better flocculating activity stimulus for all produced bioflocculants in this study. The optimum flocculating activities obtained for both individual strains and the consortium were all at alkaline pH. The yield of purified bioflocculant produced by the consortium was 8.203 g/l, while 4.190 g/l and 4.610 g/l were recovered for single strains of Actinobacterium sp. Mayor and Methylobacterium sp. Obi respectively. Further characterization of pure bioflocculants revealed that a bioflocculant dosage of 0.3 mg/ml resulted in the highest flocculating activity for both individual strains while 1.0 mg/ml of the bioflocculant produced by the consortium was required to enhance maximum flocculating efficiency. These bioflocculants proved to be all thermo stable at a temperature range of 20 to 900°C with a heating rate of 10oC/min under a constant flow of nitrogen gas. The presence of functional groups normally required for bioflocculation such as hydroxyl, carboxyl and amino was also detected. The findings of this study suggest that the producedbioflocculants can be utilized as excellent substitutes for harmful synthetic flocculants in both water and wastewater treatments as well as in other industrial applications.
- Full Text:
- Date Issued: 2012
- Authors: Ntsaluba, Luvuyo
- Date: 2012
- Subjects: Flocculation , Actinobacteria , Methylobacterium , Water -- Purification
- Language: English
- Type: Thesis , Masters , MSc (Microbiology)
- Identifier: vital:11266 , http://hdl.handle.net/10353/482 , Flocculation , Actinobacteria , Methylobacterium , Water -- Purification
- Description: Bioflocculants produced by two identified bacteria: Actinobacterium sp. Mayor and Methylobacterium sp. Obi were investigated with regard to their physicochemical and flocculating characteristics. The two strains were later combined to form a consortium for further studies. The optimum culture conditions for the bioflocculant production were similar for all strains except in the case of Actinobacterium sp. Mayor and the consortium, where glucose was replaced by sodium carbonate as a carbon source. Multi-nitrogen source was the best nitrogen source compare to individual sources for both strains. The divalent cation, Ca2+ proved to be a better flocculating activity stimulus for all produced bioflocculants in this study. The optimum flocculating activities obtained for both individual strains and the consortium were all at alkaline pH. The yield of purified bioflocculant produced by the consortium was 8.203 g/l, while 4.190 g/l and 4.610 g/l were recovered for single strains of Actinobacterium sp. Mayor and Methylobacterium sp. Obi respectively. Further characterization of pure bioflocculants revealed that a bioflocculant dosage of 0.3 mg/ml resulted in the highest flocculating activity for both individual strains while 1.0 mg/ml of the bioflocculant produced by the consortium was required to enhance maximum flocculating efficiency. These bioflocculants proved to be all thermo stable at a temperature range of 20 to 900°C with a heating rate of 10oC/min under a constant flow of nitrogen gas. The presence of functional groups normally required for bioflocculation such as hydroxyl, carboxyl and amino was also detected. The findings of this study suggest that the producedbioflocculants can be utilized as excellent substitutes for harmful synthetic flocculants in both water and wastewater treatments as well as in other industrial applications.
- Full Text:
- Date Issued: 2012
Preparation and evaluation of Lignocellulose-Montmorillonite nanocomposites for the adsorption of some heavy metals and organic dyes from aqueous solution
- Authors: Bunhu, Tavengwa
- Date: 2011
- Subjects: Lignocellulose , Lignocellulose -- Biodegradation , Water -- Purification , Adsorption , Separation (Technology) , Dyes and dyeing , Montmorillonite
- Language: English
- Type: Thesis , Doctoral , PhD (Chemistry)
- Identifier: vital:11333 , http://hdl.handle.net/10353/535 , Lignocellulose , Lignocellulose -- Biodegradation , Water -- Purification , Adsorption , Separation (Technology) , Dyes and dyeing , Montmorillonite
- Description: The need to reduce the cost of adsorption technology has led scientists to explore the use of many low cost adsorbents especially those from renewable resources. Lignocellulose and montmorillonite clay have been identified as potentially low cost and efficient adsorbent materials for the removal of toxic heavy metals and organic substances from contaminated water. Montmorillonite clay has good adsorption properties and the potential for ion exchange. Lignocellulose possesses many hydroxyl, carbonyl and phenyl groups and therefore, both montmorillonite and lignocellulose are good candidates for the development of effective and low cost adsorbents in water treatment and purification. The aim of this study was to prepare composite materials based on lignocellulose and montmorillonite clay and subsequently evaluate their efficacy as adsorbents for heavy metal species and organic pollutants in aqueous solution. It was also important to assess the adsorption properties of the modified individual (uncombined) lignocellulose and montmorillonite. Lignocellulose and sodium-exchanged montmorillonite (NaMMT) clay were each separately modified with methyl methacrylate (MMA), methacrylic acid (MAA) and methacryloxypropyl trimethoxysilane (MPS) and used as adsorbents for the removal of heavy metals and dyes from aqueous solution. The lignocellulose and NaMMT were modified with MMA, MAA and MPS through free radical graft polymerisation and/or condensation reactions. NaMMT was also modified through Al-pillaring to give AlpMMT. The materials were characterised by fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and small angle X-ray scattering (SAXS) and characterisation results showed that the modification of the montmorillonite with MAA, MMA and MPS was successful. The modified lignocellulose and montmorillonite materials were evaluated for the adsorption of heavy metal ions (Cd2+ and Pb2+) from aqueous solution by the batch method. The adsorption isotherms and kinetics of both Cd2+ and Pb2+ onto the NaMMT clay, AlpMMT and lignocellulose materials are presented. The Langmuir isotherm was found to be the best fit for the adsorption of both heavy metals onto all the adsorbents. AlpMMT showed very poor uptake for heavy metals (both Cd2+ and Pb2+). PMMAgMMT, PMAAgMMT, PMAAgLig and PMPSgLig showed improved adsorption for both heavy metals. The mechanism of heavy metal adsorption onto the adsorbents was best represented by the pseudo second-order kinetic model. PMPSgLig, NaMMT and AlpMMT showed relatively high adsorption capacities for methyl orange, while the adsorption of neutral red was comparable for almost all the adsorbents. Neither the Langmuir model nor the Freundlich model was found to v adequately describe the adsorption process of dyes onto all the adsorbents. The pseudo second-order model was found to be the best fit to describe the adsorption mechanism of both dyes onto all the adsorbents. The modification of lignocellulose and montmorillonite with suitable organic groups can potentially produce highly effective and efficient adsorbents for the removal of both heavy metals and dyes from contaminated water. Novel adsorbent composite materials based on lignocellulose and montmorillonite clay (NaMMT) were also prepared and evaluated for the removal of pollutants (dyes and heavy metals) from aqueous solution. The lignocellulose-montmorillonite composites were prepared by in situ intercalative polymerisation, using methyl methacrylate, methacrylic acid and methacryloxypropyl trimethoxysilane (MPS) as coupling agents. The composite materials were characterised by FTIR, TGA, TEM and SAXS. SAXS diffractograms showed intercalated nanocomposites of PMMAgLig-NaMMT and PMAAgLig-NaMMT, whereas PMPSgLig-NaMMT showed a phase-separated composite and the same results were confirmed by TEM. The lignocellulose-montmorillonite composites were assessed for their adsorption properties for heavy metal ions (Cd2+ and Pb2+) and dyes (methyl orange and neutral red) from aqueous solution. Among these composite materials, only PMAAgLig-NaMMT showed a marked increase in the uptake of both Cd2+ and Pb2+ relative to lignocellulose and montmorillonite when used independently. The adsorption data were fitted to the Langmuir and Freundlich isotherms, as well as to the pseudo first-order and pseudo second-order kinetic models. The data were best described by the Langmuir isotherm and the pseudo second-order kinetic model. On the adsorption of dyes, only PMPSgLig-NaMMT showed enhanced adsorption of methyl orange (MetO) compared with lignocellulose and montmorillonite separately. The enhanced adsorption was attributed to the synergistic adsorption due to the presence of MPS, lignocellulose and NaMMT. Competitive adsorption studies were carried out from binary mixtures of MetO and Cd2+ or Pb2+ in aqueous solution. The adsorption process of MetO onto the composite material was found to follow the Freundlich adsorption model, while the mechanism of adsorption followed both the pseudo first-order and pseudo second-order models. This particular composite can be used for the simultaneous adsorption of both heavy metals and organic dyes from contaminated water. The adsorption of neutral red to the composite materials was comparable and the pseudo second-order kinetic model best described the adsorption mechanism.
- Full Text:
- Date Issued: 2011
- Authors: Bunhu, Tavengwa
- Date: 2011
- Subjects: Lignocellulose , Lignocellulose -- Biodegradation , Water -- Purification , Adsorption , Separation (Technology) , Dyes and dyeing , Montmorillonite
- Language: English
- Type: Thesis , Doctoral , PhD (Chemistry)
- Identifier: vital:11333 , http://hdl.handle.net/10353/535 , Lignocellulose , Lignocellulose -- Biodegradation , Water -- Purification , Adsorption , Separation (Technology) , Dyes and dyeing , Montmorillonite
- Description: The need to reduce the cost of adsorption technology has led scientists to explore the use of many low cost adsorbents especially those from renewable resources. Lignocellulose and montmorillonite clay have been identified as potentially low cost and efficient adsorbent materials for the removal of toxic heavy metals and organic substances from contaminated water. Montmorillonite clay has good adsorption properties and the potential for ion exchange. Lignocellulose possesses many hydroxyl, carbonyl and phenyl groups and therefore, both montmorillonite and lignocellulose are good candidates for the development of effective and low cost adsorbents in water treatment and purification. The aim of this study was to prepare composite materials based on lignocellulose and montmorillonite clay and subsequently evaluate their efficacy as adsorbents for heavy metal species and organic pollutants in aqueous solution. It was also important to assess the adsorption properties of the modified individual (uncombined) lignocellulose and montmorillonite. Lignocellulose and sodium-exchanged montmorillonite (NaMMT) clay were each separately modified with methyl methacrylate (MMA), methacrylic acid (MAA) and methacryloxypropyl trimethoxysilane (MPS) and used as adsorbents for the removal of heavy metals and dyes from aqueous solution. The lignocellulose and NaMMT were modified with MMA, MAA and MPS through free radical graft polymerisation and/or condensation reactions. NaMMT was also modified through Al-pillaring to give AlpMMT. The materials were characterised by fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and small angle X-ray scattering (SAXS) and characterisation results showed that the modification of the montmorillonite with MAA, MMA and MPS was successful. The modified lignocellulose and montmorillonite materials were evaluated for the adsorption of heavy metal ions (Cd2+ and Pb2+) from aqueous solution by the batch method. The adsorption isotherms and kinetics of both Cd2+ and Pb2+ onto the NaMMT clay, AlpMMT and lignocellulose materials are presented. The Langmuir isotherm was found to be the best fit for the adsorption of both heavy metals onto all the adsorbents. AlpMMT showed very poor uptake for heavy metals (both Cd2+ and Pb2+). PMMAgMMT, PMAAgMMT, PMAAgLig and PMPSgLig showed improved adsorption for both heavy metals. The mechanism of heavy metal adsorption onto the adsorbents was best represented by the pseudo second-order kinetic model. PMPSgLig, NaMMT and AlpMMT showed relatively high adsorption capacities for methyl orange, while the adsorption of neutral red was comparable for almost all the adsorbents. Neither the Langmuir model nor the Freundlich model was found to v adequately describe the adsorption process of dyes onto all the adsorbents. The pseudo second-order model was found to be the best fit to describe the adsorption mechanism of both dyes onto all the adsorbents. The modification of lignocellulose and montmorillonite with suitable organic groups can potentially produce highly effective and efficient adsorbents for the removal of both heavy metals and dyes from contaminated water. Novel adsorbent composite materials based on lignocellulose and montmorillonite clay (NaMMT) were also prepared and evaluated for the removal of pollutants (dyes and heavy metals) from aqueous solution. The lignocellulose-montmorillonite composites were prepared by in situ intercalative polymerisation, using methyl methacrylate, methacrylic acid and methacryloxypropyl trimethoxysilane (MPS) as coupling agents. The composite materials were characterised by FTIR, TGA, TEM and SAXS. SAXS diffractograms showed intercalated nanocomposites of PMMAgLig-NaMMT and PMAAgLig-NaMMT, whereas PMPSgLig-NaMMT showed a phase-separated composite and the same results were confirmed by TEM. The lignocellulose-montmorillonite composites were assessed for their adsorption properties for heavy metal ions (Cd2+ and Pb2+) and dyes (methyl orange and neutral red) from aqueous solution. Among these composite materials, only PMAAgLig-NaMMT showed a marked increase in the uptake of both Cd2+ and Pb2+ relative to lignocellulose and montmorillonite when used independently. The adsorption data were fitted to the Langmuir and Freundlich isotherms, as well as to the pseudo first-order and pseudo second-order kinetic models. The data were best described by the Langmuir isotherm and the pseudo second-order kinetic model. On the adsorption of dyes, only PMPSgLig-NaMMT showed enhanced adsorption of methyl orange (MetO) compared with lignocellulose and montmorillonite separately. The enhanced adsorption was attributed to the synergistic adsorption due to the presence of MPS, lignocellulose and NaMMT. Competitive adsorption studies were carried out from binary mixtures of MetO and Cd2+ or Pb2+ in aqueous solution. The adsorption process of MetO onto the composite material was found to follow the Freundlich adsorption model, while the mechanism of adsorption followed both the pseudo first-order and pseudo second-order models. This particular composite can be used for the simultaneous adsorption of both heavy metals and organic dyes from contaminated water. The adsorption of neutral red to the composite materials was comparable and the pseudo second-order kinetic model best described the adsorption mechanism.
- Full Text:
- Date Issued: 2011
Preparation of photocatalytic TiO₂ nanoparticles immobilized on carbon nanofibres for water purification
- Authors: Nyamukamba, Pardon
- Date: 2011
- Subjects: Water -- Purification , Titanium alloys -- Industrial applications , Titanium , Nanoparticles , Drinking water -- Purification , Drinking water -- Contamination
- Language: English
- Type: Thesis , Masters , MSc (Chemistry)
- Identifier: vital:11330 , http://hdl.handle.net/10353/367 , Water -- Purification , Titanium alloys -- Industrial applications , Titanium , Nanoparticles , Drinking water -- Purification , Drinking water -- Contamination
- Description: Titanium dioxide nanoparticles were prepared using the sol-gel process. The effect of temperature and precursor concentration on particle size was investigated. The optimum conditions were then used to prepare carbon and nitrogen doped titanium dioxide (TiO2) nanoparticles. Doping was done to reduce band gap of the nanoparticles in order to utilize visible light in the photocatalytic degradation of organic compounds. A significant shift of the absorption edge to a longer wavelength (lower energy) from 420 nm to 456 nm and 420 nm to 428 nm was observed for the carbon doped and nitrogen doped TiO2 respectively. In this study, the prepared TiO2 photocatalyst was immobilized on carbon nanofibres to allow isolation and reuse of catalyst. The photocatalytic activity of the catalyst was tested using methyl orange as a model pollutant and was based on the decolourization of the dye as it was degraded. The doped TiO2 exhibited higher photocatalytic activity than the undoped TiO2. The materials prepared were characterized by XRD, TEM, SEM, FT-IR, DSC and TGA while the doped TiO2 was characterized by XPS, ESR and Raman Spectroscopy.
- Full Text:
- Date Issued: 2011
- Authors: Nyamukamba, Pardon
- Date: 2011
- Subjects: Water -- Purification , Titanium alloys -- Industrial applications , Titanium , Nanoparticles , Drinking water -- Purification , Drinking water -- Contamination
- Language: English
- Type: Thesis , Masters , MSc (Chemistry)
- Identifier: vital:11330 , http://hdl.handle.net/10353/367 , Water -- Purification , Titanium alloys -- Industrial applications , Titanium , Nanoparticles , Drinking water -- Purification , Drinking water -- Contamination
- Description: Titanium dioxide nanoparticles were prepared using the sol-gel process. The effect of temperature and precursor concentration on particle size was investigated. The optimum conditions were then used to prepare carbon and nitrogen doped titanium dioxide (TiO2) nanoparticles. Doping was done to reduce band gap of the nanoparticles in order to utilize visible light in the photocatalytic degradation of organic compounds. A significant shift of the absorption edge to a longer wavelength (lower energy) from 420 nm to 456 nm and 420 nm to 428 nm was observed for the carbon doped and nitrogen doped TiO2 respectively. In this study, the prepared TiO2 photocatalyst was immobilized on carbon nanofibres to allow isolation and reuse of catalyst. The photocatalytic activity of the catalyst was tested using methyl orange as a model pollutant and was based on the decolourization of the dye as it was degraded. The doped TiO2 exhibited higher photocatalytic activity than the undoped TiO2. The materials prepared were characterized by XRD, TEM, SEM, FT-IR, DSC and TGA while the doped TiO2 was characterized by XPS, ESR and Raman Spectroscopy.
- Full Text:
- Date Issued: 2011
Assessment of the prevalence of virulent Eschericia coli strains in the final effluents of wastewater treatment plants in the Eastern Cape Province of South Africa
- Authors: Osode, Augustina Nwabuje
- Date: 2010
- Subjects: Escherichia coli , Escherichia coli -- Genetics , Effluent quality -- Testing , Water -- Purification , Sewage disposal plants , Escherichia coli -- South Africa -- Eastern Cape , Whole effluent toxicity testing
- Language: English
- Type: Thesis , Doctoral , PhD (Microbiology)
- Identifier: vital:11246 , http://hdl.handle.net/10353/d1001062 , Escherichia coli , Escherichia coli -- Genetics , Effluent quality -- Testing , Water -- Purification , Sewage disposal plants , Escherichia coli -- South Africa -- Eastern Cape , Whole effluent toxicity testing
- Description: Escherichia coli (E. coli) is a common inhabitant of surface waters in the developed and developing worlds. The majority of E. coli cells present in water are not particularly pathogenic to humans; however, there are some present in small proportion that possess virulence genes that allow them to colonize the digestive tract. Pathogenic E. coli causes acute and chronic diarrheal diseases, especially among children in developing countries and in travelers in these locales. The present study, conducted between August 2007 and July 2008, investigated the prevalence and distribution of virulent E. coli strains as either free or attached cells in the final effluents of three wastewater treatment plants located in the Eastern Cape Province of South Africa and its impact on the physico-chemical quality of the receiving water body. The wastewater treatment plants are located in urban (East Bank Reclamation Works, East London), peri-urban (Dimbaza Sewage Treatment Works) and in rural area (Alice Sewage Treatment Works). The effluent quality of the treatment plants were acceptable with respect to pH (6.9-7.8), temperature (13.8-22.0 °C), dissolved oxygen (DO) (4.9-7.8 mg/L), salinity (0.12-0.17 psu), total dissolved solids (TDS) (119-162 mg/ L) and nitrite concentration (0.1-0.4 mg/l). The other xii physicochemical parameters that did not comply with regulated standards include the following: phosphate (0.1-4.0 mg/L); chemical oxygen demand (COD) (5-211 mg/L); electrical conductivity (EC) (237-325 μS/cm) and Turbidity (7.7-62.7 NTU). Results suggest that eutrophication is intensified in the vicinity of the effluent discharge points, where phosphate and nitrate were found in high concentrations. Presumptive E. coli was isolated from the effluent samples by culture-based methods and confirmed using Polymerase Chain Reaction (PCR) techniques. Antibiogram assay was also carried out using standard in vitro methods on Mueller Hinton agar. The viable counts of presumptive E. coli for the effluent samples associated with 180 μm plankton size ranged between 0 – 4.30 × 101 cfu/ml in Dimbaza, 0 – 3.88 × 101 cfu/ml in Alice and 0 – 8.00 × 101 cfu/ml in East London. In the 60 μm plankton size category E. coli densities ranged between 0 and 4.2 × 101 cfu/ml in Dimbaza, 0 and 2.13 × 101 cfu/ml in Alice and 0 and 8.75 × 101 cfu/ml in East London. Whereas in the 20 μm plankton size category presumptive E. coli density varied from 0 to 5.0 × 101 cfu/ml in Dimbaza, 0 to 3.75 × 101 cfu/ml in Alice and 0 to 9.0 × 101 cfu/ml in East London. The free-living presumptive E. coli density ranged between 0 and 3.13 × 101 cfu/ml in Dimbaza, between 0 and 8.0 × 101 cfu/ml in Alice and between 0 and 9.5 × 101 cfu/ml in East London. Molecular analysis successfully amplified target genes (fliCH7, rfbEO157, ial and aap) which are characteristic of pathogenic E. coli strains. The PCR assays using uidA-specific primer confirmed that a genetic region homologous in size to the E. coli uidA structural gene, including the regulatory region, was present in 3 of the E. coli isolates from Alice, 10 from Dimbaza and 8 from East London. Of the 3 E. coli isolates from Alice, 1 (33.3%) was positive for the fliCH7 genes and 3 was positive for rfbEO157 genes. Out of the 10 isolates from Dimbaza, 4 were xiii positive for fliCH7 genes, 6 were positive for the rfbEO157 genes and 1 was positive for the aap genes; and of the 8 isolates from East London, 1 was positive for fliCH7 genes, 2 were for the rfbEO157 genes, 6 were positive for the ial genes. Antimicrobial susceptibility profile revealed that all of the E. coli strains isolated from the effluent water samples were resistant (R) to linezolid, polymyxin B, penicillin G and sulfamethoxazole. The E. coli isolates from Dimbaza (9/10) and East London (8/8) respectively were resistant to erythromycin. All the isolates were found to be susceptible (S) to amikacin, ceftazidime, ciprofloxacin, colistin sulphate, ceftriaxone, cefotaxime, cefuroxime, ertapenem, gatifloxacin, gentamycin, imidazole, kanamycin, meropenem, moxifloxacin, neomycin, netilmicin, norfloxacin and tobramycin. The findings of this study revealed that the Alice wastewater treatment plant was the most efficient as it produced the final effluent with the least pathogenic E. coli followed by the Dimbaza wastewater treatment plant. In addition, the findings showed that the wastewater treatment plant effluents are a veritable source of pathogenic E. coli in the Eastern Cape Province watershed. We suggest that to maximize public health protection, treated wastewater effluent quality should be diligently monitored pursuant to ensuring high quality of final effluents.
- Full Text:
- Date Issued: 2010
- Authors: Osode, Augustina Nwabuje
- Date: 2010
- Subjects: Escherichia coli , Escherichia coli -- Genetics , Effluent quality -- Testing , Water -- Purification , Sewage disposal plants , Escherichia coli -- South Africa -- Eastern Cape , Whole effluent toxicity testing
- Language: English
- Type: Thesis , Doctoral , PhD (Microbiology)
- Identifier: vital:11246 , http://hdl.handle.net/10353/d1001062 , Escherichia coli , Escherichia coli -- Genetics , Effluent quality -- Testing , Water -- Purification , Sewage disposal plants , Escherichia coli -- South Africa -- Eastern Cape , Whole effluent toxicity testing
- Description: Escherichia coli (E. coli) is a common inhabitant of surface waters in the developed and developing worlds. The majority of E. coli cells present in water are not particularly pathogenic to humans; however, there are some present in small proportion that possess virulence genes that allow them to colonize the digestive tract. Pathogenic E. coli causes acute and chronic diarrheal diseases, especially among children in developing countries and in travelers in these locales. The present study, conducted between August 2007 and July 2008, investigated the prevalence and distribution of virulent E. coli strains as either free or attached cells in the final effluents of three wastewater treatment plants located in the Eastern Cape Province of South Africa and its impact on the physico-chemical quality of the receiving water body. The wastewater treatment plants are located in urban (East Bank Reclamation Works, East London), peri-urban (Dimbaza Sewage Treatment Works) and in rural area (Alice Sewage Treatment Works). The effluent quality of the treatment plants were acceptable with respect to pH (6.9-7.8), temperature (13.8-22.0 °C), dissolved oxygen (DO) (4.9-7.8 mg/L), salinity (0.12-0.17 psu), total dissolved solids (TDS) (119-162 mg/ L) and nitrite concentration (0.1-0.4 mg/l). The other xii physicochemical parameters that did not comply with regulated standards include the following: phosphate (0.1-4.0 mg/L); chemical oxygen demand (COD) (5-211 mg/L); electrical conductivity (EC) (237-325 μS/cm) and Turbidity (7.7-62.7 NTU). Results suggest that eutrophication is intensified in the vicinity of the effluent discharge points, where phosphate and nitrate were found in high concentrations. Presumptive E. coli was isolated from the effluent samples by culture-based methods and confirmed using Polymerase Chain Reaction (PCR) techniques. Antibiogram assay was also carried out using standard in vitro methods on Mueller Hinton agar. The viable counts of presumptive E. coli for the effluent samples associated with 180 μm plankton size ranged between 0 – 4.30 × 101 cfu/ml in Dimbaza, 0 – 3.88 × 101 cfu/ml in Alice and 0 – 8.00 × 101 cfu/ml in East London. In the 60 μm plankton size category E. coli densities ranged between 0 and 4.2 × 101 cfu/ml in Dimbaza, 0 and 2.13 × 101 cfu/ml in Alice and 0 and 8.75 × 101 cfu/ml in East London. Whereas in the 20 μm plankton size category presumptive E. coli density varied from 0 to 5.0 × 101 cfu/ml in Dimbaza, 0 to 3.75 × 101 cfu/ml in Alice and 0 to 9.0 × 101 cfu/ml in East London. The free-living presumptive E. coli density ranged between 0 and 3.13 × 101 cfu/ml in Dimbaza, between 0 and 8.0 × 101 cfu/ml in Alice and between 0 and 9.5 × 101 cfu/ml in East London. Molecular analysis successfully amplified target genes (fliCH7, rfbEO157, ial and aap) which are characteristic of pathogenic E. coli strains. The PCR assays using uidA-specific primer confirmed that a genetic region homologous in size to the E. coli uidA structural gene, including the regulatory region, was present in 3 of the E. coli isolates from Alice, 10 from Dimbaza and 8 from East London. Of the 3 E. coli isolates from Alice, 1 (33.3%) was positive for the fliCH7 genes and 3 was positive for rfbEO157 genes. Out of the 10 isolates from Dimbaza, 4 were xiii positive for fliCH7 genes, 6 were positive for the rfbEO157 genes and 1 was positive for the aap genes; and of the 8 isolates from East London, 1 was positive for fliCH7 genes, 2 were for the rfbEO157 genes, 6 were positive for the ial genes. Antimicrobial susceptibility profile revealed that all of the E. coli strains isolated from the effluent water samples were resistant (R) to linezolid, polymyxin B, penicillin G and sulfamethoxazole. The E. coli isolates from Dimbaza (9/10) and East London (8/8) respectively were resistant to erythromycin. All the isolates were found to be susceptible (S) to amikacin, ceftazidime, ciprofloxacin, colistin sulphate, ceftriaxone, cefotaxime, cefuroxime, ertapenem, gatifloxacin, gentamycin, imidazole, kanamycin, meropenem, moxifloxacin, neomycin, netilmicin, norfloxacin and tobramycin. The findings of this study revealed that the Alice wastewater treatment plant was the most efficient as it produced the final effluent with the least pathogenic E. coli followed by the Dimbaza wastewater treatment plant. In addition, the findings showed that the wastewater treatment plant effluents are a veritable source of pathogenic E. coli in the Eastern Cape Province watershed. We suggest that to maximize public health protection, treated wastewater effluent quality should be diligently monitored pursuant to ensuring high quality of final effluents.
- Full Text:
- Date Issued: 2010
- «
- ‹
- 1
- ›
- »