Electrode Modification Using Alkynyl Substituted Fe(II) Phthalocyanine via Electrografting and Click Chemistry for Electrocatalysis
- Nxele, Siphesihle R, Mashazi, Philani N, Nyokong, Tebello
- Authors: Nxele, Siphesihle R , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7284 , http://hdl.handle.net/10962/d1020329
- Description: In this work, tetrakis(5-hexyn-oxy)Fe(II) phthalocyanine was synthesised in order to perform a click reaction between the terminal alkyne groups and an azide group on a glassy carbon electrode (GCE) surface. An azide group was formed on the electrode surface following electrografting using 4-azidobenzene diazonium tetrafluoroborate by electrochemical reduction. The Cu(I) catalyzed alkyne-azide Huisgen cycloaddition reaction was then employed in order to react the terminal alkyne groups on the phthalocyanine with the azide groups on the GCE surface. The modified electrode was employed to catalyse the oxidation of hydrazine. The electrode showed good electrocatalytic ability towards the detection of hydrazine with a sensitivity of 15.38 µA mM−1 and a limit of detection of 1.09 µM. , Original publication is available at http://dx.doi.org/10.1002/elan.201500212
- Full Text: false
- Authors: Nxele, Siphesihle R , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7284 , http://hdl.handle.net/10962/d1020329
- Description: In this work, tetrakis(5-hexyn-oxy)Fe(II) phthalocyanine was synthesised in order to perform a click reaction between the terminal alkyne groups and an azide group on a glassy carbon electrode (GCE) surface. An azide group was formed on the electrode surface following electrografting using 4-azidobenzene diazonium tetrafluoroborate by electrochemical reduction. The Cu(I) catalyzed alkyne-azide Huisgen cycloaddition reaction was then employed in order to react the terminal alkyne groups on the phthalocyanine with the azide groups on the GCE surface. The modified electrode was employed to catalyse the oxidation of hydrazine. The electrode showed good electrocatalytic ability towards the detection of hydrazine with a sensitivity of 15.38 µA mM−1 and a limit of detection of 1.09 µM. , Original publication is available at http://dx.doi.org/10.1002/elan.201500212
- Full Text: false
Iodine-Doped Cobalt Phthalocyanine Supported on Multiwalled Carbon Nanotubes for Electrocatalysis of Oxygen Reduction Reaction
- Nyoni, Stephen, Mashazi, Philani N, Nyokong, Tebello
- Authors: Nyoni, Stephen , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7242 , http://hdl.handle.net/10962/d1020246
- Description: 4-(4,6-Diaminopyrimidin-2-ylthio) phthalocyaninatocobalt(II) (CoPyPc) was iodine doped, and its electrocatalytic properties explored. Physical characterization techniques such as UV-vis, X-ray photoelectron, electron paramagnetic resonance and infra-red spectroscopy were used. Cyclic voltammetry, electrochemical impedance spectroscopy and rotating disk electrode were used for electrochemical characterization of electrodes modified with the prepared phthalocyanine and its nanocomposites. The electrocatalytic effect of a new iodine-doped cobalt phthalocyanine derivative supported on multiwalled carbon nanotubes was then investigated towards oxygen reduction reaction. The electrocatalytic activity of the iodine-doped cobalt phthalocyanine was found to be superior in terms of current over the undoped phthalocyanine nanocomposite. , Original publication is available at http://dx.doi.org/10.1002/elan.201400499
- Full Text: false
- Authors: Nyoni, Stephen , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7242 , http://hdl.handle.net/10962/d1020246
- Description: 4-(4,6-Diaminopyrimidin-2-ylthio) phthalocyaninatocobalt(II) (CoPyPc) was iodine doped, and its electrocatalytic properties explored. Physical characterization techniques such as UV-vis, X-ray photoelectron, electron paramagnetic resonance and infra-red spectroscopy were used. Cyclic voltammetry, electrochemical impedance spectroscopy and rotating disk electrode were used for electrochemical characterization of electrodes modified with the prepared phthalocyanine and its nanocomposites. The electrocatalytic effect of a new iodine-doped cobalt phthalocyanine derivative supported on multiwalled carbon nanotubes was then investigated towards oxygen reduction reaction. The electrocatalytic activity of the iodine-doped cobalt phthalocyanine was found to be superior in terms of current over the undoped phthalocyanine nanocomposite. , Original publication is available at http://dx.doi.org/10.1002/elan.201400499
- Full Text: false
Polyamide nanofiber membranes functionalized with zinc phthalocyanines
- Goethals, Annelies, Mugadza, Tawanda, Arslanoglu, Yasin, Zugle, Ruphino, Antunes, Edith M, Hulle, Stijn W H Van, Nyokong, Tebello, Clerck, Karen De
- Authors: Goethals, Annelies , Mugadza, Tawanda , Arslanoglu, Yasin , Zugle, Ruphino , Antunes, Edith M , Hulle, Stijn W H Van , Nyokong, Tebello , Clerck, Karen De
- Language: English
- Type: Article
- Identifier: vital:7313 , http://hdl.handle.net/10962/d1020539
- Description: Electrospinning is an efficient method for the production of polyamide nanofiber membranes that are suitable for water filtration. Previous studies have shown that nanofiber membranes have high clean water permeability. The pathogen removal efficiency can be improved by functionalization with (organic) biocides. However, these membranes, like other membranes, are vulnerable to fouling which reduces the filtration efficiency. Therefore the present article investigates the potential of zinc phthalocyanines, which can produce singlet oxygen in the presence of visible light, as a functionalizing agent. The polyamide nanofiber membranes were functionalized with phthalocyanines using both a pre-functionalizing and post-functionalizing method. Only the post-functionalization method shows to result in nanofiber membranes capable of producing singlet oxygen. After 30 min 45% of 1,2-diphenylisobenzofuran (DPBF), used as an oxygen quencher, was removed by reaction with singlet oxygen. This resulted in a removal rate of 0.33 mol DBPF mol−1Zn min−1. During short term leaching tests, phthalocyanines could not be detected. , Original publication is available at http://dx.doi.org/10.1002/app.40486
- Full Text: false
- Authors: Goethals, Annelies , Mugadza, Tawanda , Arslanoglu, Yasin , Zugle, Ruphino , Antunes, Edith M , Hulle, Stijn W H Van , Nyokong, Tebello , Clerck, Karen De
- Language: English
- Type: Article
- Identifier: vital:7313 , http://hdl.handle.net/10962/d1020539
- Description: Electrospinning is an efficient method for the production of polyamide nanofiber membranes that are suitable for water filtration. Previous studies have shown that nanofiber membranes have high clean water permeability. The pathogen removal efficiency can be improved by functionalization with (organic) biocides. However, these membranes, like other membranes, are vulnerable to fouling which reduces the filtration efficiency. Therefore the present article investigates the potential of zinc phthalocyanines, which can produce singlet oxygen in the presence of visible light, as a functionalizing agent. The polyamide nanofiber membranes were functionalized with phthalocyanines using both a pre-functionalizing and post-functionalizing method. Only the post-functionalization method shows to result in nanofiber membranes capable of producing singlet oxygen. After 30 min 45% of 1,2-diphenylisobenzofuran (DPBF), used as an oxygen quencher, was removed by reaction with singlet oxygen. This resulted in a removal rate of 0.33 mol DBPF mol−1Zn min−1. During short term leaching tests, phthalocyanines could not be detected. , Original publication is available at http://dx.doi.org/10.1002/app.40486
- Full Text: false
Ultrafast Photodynamics of the Indoline Dye D149 Adsorbed to Porous ZnO in Dye-Sensitized Solar Cells
- Rohwer, Egmont, Richter, Christoph, Heming, Nadine, Strauch, Kerstin, Litwinski, Christian, Nyokong, Tebello, Schlettwein, Derck, Schwoerer, Heinrich
- Authors: Rohwer, Egmont , Richter, Christoph , Heming, Nadine , Strauch, Kerstin , Litwinski, Christian , Nyokong, Tebello , Schlettwein, Derck , Schwoerer, Heinrich
- Language: English
- Type: Article
- Identifier: vital:7326 , http://hdl.handle.net/10962/d1020576
- Description: We investigate the ultrafast dynamics of the photoinduced electron transfer between surface-adsorbed indoline D149 dye and porous ZnO as used in the working electrodes of dye-sensitized solar cells. Transient absorption spectroscopy was conducted on the dye in solution, on solid state samples and for the latter in contact to a I−/I3− redox electrolyte typical for dye-sensitized solar cells to elucidate the effect of each component in the observed dynamics. D149 in a solution of 1:1 acetonitrile and tert-butyl alcohol shows excited-state lifetimes of 300±50 ps. This signature is severely quenched when D149 is adsorbed to ZnO, with the fastest component of the decay trace measured at 150±20 fs due to the charge-transfer mechanism. Absorption bands of the oxidized dye molecule were investigated to determine regeneration times which are in excess of 1 ns. The addition of the redox electrolyte to the system results in faster regeneration times, of the order of 1 ns. , Original publication is available at http://dx.doi.org/10.1002/cphc.201200715
- Full Text: false
- Authors: Rohwer, Egmont , Richter, Christoph , Heming, Nadine , Strauch, Kerstin , Litwinski, Christian , Nyokong, Tebello , Schlettwein, Derck , Schwoerer, Heinrich
- Language: English
- Type: Article
- Identifier: vital:7326 , http://hdl.handle.net/10962/d1020576
- Description: We investigate the ultrafast dynamics of the photoinduced electron transfer between surface-adsorbed indoline D149 dye and porous ZnO as used in the working electrodes of dye-sensitized solar cells. Transient absorption spectroscopy was conducted on the dye in solution, on solid state samples and for the latter in contact to a I−/I3− redox electrolyte typical for dye-sensitized solar cells to elucidate the effect of each component in the observed dynamics. D149 in a solution of 1:1 acetonitrile and tert-butyl alcohol shows excited-state lifetimes of 300±50 ps. This signature is severely quenched when D149 is adsorbed to ZnO, with the fastest component of the decay trace measured at 150±20 fs due to the charge-transfer mechanism. Absorption bands of the oxidized dye molecule were investigated to determine regeneration times which are in excess of 1 ns. The addition of the redox electrolyte to the system results in faster regeneration times, of the order of 1 ns. , Original publication is available at http://dx.doi.org/10.1002/cphc.201200715
- Full Text: false