The electrocatalytic response of metallophthalocyanines when clicked to electrodes and to nanomaterials
- Authors: Mpeta, Lekhetho Simon
- Date: 2021
- Subjects: Phthalocyanines , Nanostructured materials , Electrocatalysis , Nanoparticles , Environmental chemistry , Electrodes , Organic wastes -- Purification
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/172191 , vital:42174 , 10.21504/10962/172191
- Description: Conjugates of nanomaterials and metallophthalocyanines (MPcs) have been prepared and their electrocatalytic activity studied. The prepared nanomaterials are zinc oxide and silver nanoparticles, reduced graphene oxide nanosheets and semiconductor quantum dots. The MPcs used in this work are cobalt (II) (1a), manganese(III) (1b) and iron (II) (1c) 2,9(10),16(17),23(24)- tetrakis 4-((4-ethynylbenzyl) oxy) phthalocyaninato, 2,9(10),16(17),23(24)- tetrakis(5-pentyn-oxy) cobalt (II) phthalocyaninato (2), 9(10),16(17),23(24)- tris-[4-tert-butylphenoxy)-2- (4-ethylbezyl-oxy) cobalt (II) phthalocyaninato (3), 9(10),16(17),23(24)- tris-[4-tertbutylphenoxy)-2-(pent-4yn-yloxy)] cobalt (II) phthalocyaninato (4), cobalt (II) (5a) and manganese (III) (5b) 2,9(10),16(17),23(24)- tetrakis [4-(4-(5-chloro-1H-benzo [d]imidazol-2-yl)phenoxy] phthalocyaninato and 9(10),16(17),23(24)- tris tert butyl phenoxy- 2- [4-(4-(5-chloro-1H-benzo[d]imidazole-2-yl)phenoxy] cobalt (II) phthalocyaninato (6). Some of these MPcs (1a, 3 and 4) were directly clicked on azide grafted electrode, while some (1b, 1c, 2, 5a and 5b) were clicked to azide functionalised nanomaterials and then drop-dried on the electrodes. One phthalocyanine (5b) was drop-dried on the electrode then silver nanoparticles were electrodeposited on it taking advantage of metal-N bond. Scanning electrochemical microscopy, voltammetry, chronoamperometry, electrochemical impedance spectroscopy are among electrochemical methods used to characterise modified electrodes. Transmission electron microscopy, X-ray photoelectron spectroscopy, Xray diffractometry, Raman spectroscopy and infrared spectroscopy were employed to study surface functionalities, morphology and topography of the nanomaterials and complexes. Electrocatalytic activity of the developed materials were studied towards oxidation of 2-mercaptoethanol, hydrazine and hydrogen peroxide while the reduction study was based on oxygen and hydrogen peroxide. In general, the conjugates displayed superior catalytic activity when compared to individual materials. Complex 2 alone and when conjugated to zinc oxide nanoparticles were studied for their nonlinear optical behaviour. And the same materials were explored for their hydrazine detection capability. The aim of this study was to develop sensitive, selective and affordable sensors for selected organic waste pollutants. Conjugates were found to achieve the aim of the study compared to when individual materials were employed.
- Full Text:
- Date Issued: 2021
An investigation of the morphological and electrochemical properties of anode titanate materials used in li-ion batteries
- Authors: Gelant, Charmaine
- Date: 2020
- Subjects: Electrodes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/48346 , vital:40851
- Description: The chemistry involved in the synthesis of lithium titanium oxide (Li4Ti5O12) for lithium ion battery applications is critical for understanding and optimizing the most cost-efficient manufacturing route. This study investigates the sol-gel synthesis technique of Li4Ti5O12 using triethanolamine (TEOA) as complexing agent by means of in-situ Powder X-ray Diffraction (PXRD). The influence of doping with various metals such as Al3+, Mg2+ , Co3+ and Ni2+ that were made as precursors was considered for comparison purposes due to literature showing improved electrochemical performance using the molecular formula of Li4Ti4.95M0.05O12. The in-situ PXRD technique was used to identify the phase changes that occurred in the thermal synthesis process from the sol-gel precursors to the final crystalline oxides. The materials’ decomposition mechanisms were characterized by thermal gravimetric analysis (TGA) as the precursors were gradually heated to obtain the final oxides. BET surface area analysis and scanning electron microscopy (SEM) were used in order to obtain a morphological understanding of the materials during the synthetic route at specific temperature regions. The in-situ studies have shown that the precursor materials are amorphous at room temperature to about 550 °C, after which the spinel and anatase formed, with relatively small crystallites and a large surface area. The study also showed that a crystalline intermediate phase formed at around 150-200 °C, which then disappeared above 250 °C and was speculated to be a titanium acid (H2Ti2O5.H2O). Upon further heating above 250 °C, the anatase phase converted to the high temperature stable TiO2 phase, rutile, also with an increased formation of the expected LTO spinel phase around 850 °C. Keeping the material at 850 °C, isothermally, did show further conversion of the rutile into the desired spinel phase Li4Ti5O12 (LTO) with an increase in the crystallite size and a decrease in surface area. SEM analysis of the material at 850 °C did show some extensive sintering of the particles with some samples indicating the presence of an additional β-Li2TiO3 phase that formed at the high temperatures. Upon cooling, the βLi2TiO3 phase showed a distinctive powder diffraction pattern besides the typical spinel II LTO phase. The study showed that in comparison to the oxide formed at 850 °C, a mixed phase material of the spinel LTO, anatase and rutile could be achieved at temperatures close to 650 °C with very small crystallites and a relatively large surface area that showed desirable electrochemical properties. Suitable Li-ion coin cells were built with the undoped spinel and doped materials that were isothermally made at 650 °C and 850 °C, whereby their electrochemical properties were tested in the form of cell capacity, electrochemical impedance spectroscopy (EIS) and differential capacity (dQ/dV) studies. The cells made with the materials at 850 °C provided reasonable capacity where the dQ/dV plots did show a single step redox reaction at around 1.5V vs Li/Li+ . These were compared to cells made with commercially available LTO and highlighted the importance of high surface area and small particle size of the active material in order to achieve acceptable electrochemical performances. The cells with the materials made at 650 °C showed to have good capacity upon the first discharge with a number of irreversible phase transitions that were subsequently not observed upon recharging. The dQ/dV graphs showed that the phase transitions were unique to the mixed phase composition of the material made at low temperatures and the cells made with the doped spinel materials were on average better performing than the undoped LTO material. Subsequent grinding steps of the active material made at 850 °C improved the capacity performance of the cells but were still lower when compared to the commercially available material. Hence, significantly longer grinding and processing time would be required to achieve battery active materials that are acceptable for commercial use. This study highlights the importance of understanding the phase transitions that occur during the synthesis route of making battery active material, where doping with different elements and using lower temperatures during synthesis could lead to electroactive materials that do not require additional excessive processing steps such as grinding.
- Full Text:
- Date Issued: 2020
Voltammetric investigation of microbiological growth media and carbon nanotube modified electrodes : a case study of oxytetracycline
- Authors: Kruid, Jan
- Date: 2013
- Subjects: Voltammetry , Electrodes , Oxytetracycline , Carbon nanotubes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4156 , http://hdl.handle.net/10962/d1018238
- Description: Oxytetracycline (OTC) is a broad spectrum antibiotic used extensively in the agricultural and human-health sector, and is effective against various gram positive and –negative bacteria as well as large viruses and certain pathogenic Rickettsiae. This study addresses the lack of voltammetric knowledge regarding the electroanalytical characterisation of OTC and its analysis in complex matrices. Cyclic voltammetry (CV) revealed several irreversible anodic peaks for OTC at a bare glassy carbon electrode (GCE). These current responses were improved through the selection of a diluent for OTC stock preparation, electrolyte solution and electrolyte pH, stir time and applied preconditioning potential. Under enhanced adsorptive conditions and using square wave voltammetry (SWV), a detection limit of 24.3 nM was achieved. The electrode surface could be renewed in vitro for 10 successive scans. OTC oxidation was characterised as a one electron:one proton ECiE mechanisms. Next, investigating the viability of voltammetry in various complex microbiological growth media revealed that selected growth media contained interfering redox active components, which, while simultaneously coating the electrode surface, effectively reduced GCE performance and lowered the active electrode surface area, as ascertained through CV and electrochemical impedance spectroscopy (EIS) studies. This interference lowered OTC current response in the presence of growth media which was partially recovered by appropriate growth media selection and sample dilution. In testing the use of acid functionalised multi-walled carbon nanotubes (MWCNTs) to improve anodic OTC response, charge-based attraction was observed between the MWCNT dispersal agent Nafion® and OTC, while increased surface area associated with prolonged acid functionalisation time aided in improving OTC current response.
- Full Text:
- Date Issued: 2013
Electrochemical studies of titanium, manganese and cobalt phthalocyanines
- Authors: Nombona, Nolwazi
- Date: 2009
- Subjects: Titanium , Manganese , Cobalt , Phthalocyanines , Electrochemistry , Electrodes , Self-assembly (Chemistry)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4312 , http://hdl.handle.net/10962/d1004970 , Titanium , Manganese , Cobalt , Phthalocyanines , Electrochemistry , Electrodes , Self-assembly (Chemistry)
- Description: Syntheses, spectral, electrochemical and spectroelectrochemical studies of phenylthio and amino derivatised metallophthalocyanines complexes are reported. The complexes are immobilized onto a gold macro disk, gold ultramicroelectrode and gold coated fiber electrodes via self assembly with phenylthio MPc derivatives or onto a glassy carbon electrode via electropolymerisation with amino MPc derivatives. For the first time MPc SAMs were formed on gold coated fiber. The electrocatalytic behavior of the modified electrodes was studied for the detection of nitrite and L-cysteine, all modified electrodes showed improved electrocatalytic oxidation compared to the unmodified electrode. The MPc complexes catalyzed nitrite oxidation via a two-electron mechanism producing nitrate. Cobalt tetraaminophthalocyanine showed the best catalytic activity for nitrite oxidation in terms of overpotential lowering compared to other complexes and thus was used for nitrite detection in a food sample, the nitrite concentration was determined to be 59.13 ppm, well within the limit for cured meat products. Electrocatalytic oxidation of L-cysteine on SAM modified gold coated fiber was reported for the first time. The gold coated fiber and ultamicro cylinder electrode were less stable towards the electro-oxidation of cysteine compared to its oxidation on the gold disk. The gold disk electrode gave better catalytic performance in terms of stability and reduction of overpotential. The phenylthio cobalt phthalocyanine derivative gave the best catalytic activity for L-cysteine oxidation in terms of overpotential lowering compared to other phenylthio derivatized MPc complexes. The amount of L-cysteine in human urine was 2.4 mM, well within the urinary L-cysteine excretion range for a healthy human being.
- Full Text:
- Date Issued: 2009
Polymers, catalysts and nanostructures a hybrid approach to biomolecule detection
- Authors: Frith, Kelly-Anne
- Date: 2009
- Subjects: Polymers , Nanostructured materials , Biomolecules , Tryptophan , Melatonin , Electrodes , Electrochemistry , Tryptophan oxygenase
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3980 , http://hdl.handle.net/10962/d1004039 , Polymers , Nanostructured materials , Biomolecules , Tryptophan , Melatonin , Electrodes , Electrochemistry , Tryptophan oxygenase
- Description: The main goals in electroanalytical sensing are towards improved sensitivity and selectivity, or specificity, of an analyte. There are several approaches to achieving these goals with the main approach being modification of an electrode surface with synthetic or natural catalysts (enzymes), polymers and also utilisation of nanostructured materials. At present, there is a strong movement towards hybrid sensing which couple different properties of two or more surface modification approaches. In this thesis, a range of these surface modifications were explored for analysis and detection of two main analytes: the amino acid, tryptophan (Trp); and, the neurotransmitter, dopamine (DA). Specifically, this thesis aimed to utilise these methods to enhance the sensitivity and selectivity for Trp over an interferent, the indoleamine, melatonin (Mel); and, DA over the vitamin, ascorbic acid (AA). For Trp detection, immobilisation of an enzyme, Tryptophanase (Trpase) resulted in poor selectivity for the analyte. However, enhanced sensitivity and selectivity was achieved through pH manipulation of the electrolyte medium at a Nafion®-modified electrode surface for both Trp and Mel. At pH 3.0, the Mel and Trp anodic peak potentials were sufficiently resolved allowing for an LOD of 1.60 and 1.62 nM,respectively, and permitting the accurate analysis of Trp in a dietary supplement containing Mel. Multi-walled carbon nanotubes (MWCNTs) suspended in Nafion® exhibited further increases in the signal responses of these analytes at pH 3.0 and 7.4 with minimal change in the resolution of the anodic peaks. A lower sensitivity was, therefore, observed at the Nafion® and MWCNT modified electrode compared to the Nafion®-modified electrode at pH 3.0 with LODs of 0.59 and 0.80 nM exhibited for Trp and Mel, respectively. Enhanced selectivity for Trp in the presence of Mel can be achieved with MWCNTs in the presence of metallotetrasulphonated phthalocyanines (MTSPcs) particularly at pH 3.0, owing to cation exchange effects. However, the lack of sensitivity towards Trp, and even Mel, at this CoTSPc and MWCNT modified electrode remains a drawback. For DA, detection at the MWCNT and Nafion® surface resulted in improved sensitivity over that of both the bare electrode (613.0 nM) and the Nafion® modified electrode (1045.1 nM) with a calculated LOD of 133.9 nM at this layer. Furthermore, improvements in the selectivity of DA were achieved at the Nafion® and MWCNT modified electrode as exclusion of AA (150 μM) was achieved. At the MWCNT and CoTSPc surface, AA was excluded up to 130 μM with sensitivity for DA extending as low as 14.3 nM, far greater than observed for Trp and Mel. These concentrations are well within physiological concentration ranges and represent the most significant solution yet in terms of AA exclusion and enhanced sensitivity for DA. An examination of the surface layering by impedance spectroscopy and atomic force microscopy indicates that the success of the hybrid sensor utilising CoTSPc and MWCNTs lay in improved dispersion of MWCNTs and improved electron transfer kinetics, facilitated by the net charge of the materials present. This thesis, thus, showed the utility of a judicious selection of synthetic and biological catalysts, polymers and carbon nanomaterials towards a hybrid approach to the electrochemical sensing of Trp, Mel, DA and AA with focus on sensitivity and selectivity of these analytes.
- Full Text:
- Date Issued: 2009