A sensitive and reliable method for the detection of lipid peroxidation in biological tissues
- Anoopkumar-Dukie, Shailendra, Walker, Roderick B, Daya, Santylal
- Authors: Anoopkumar-Dukie, Shailendra , Walker, Roderick B , Daya, Santylal
- Date: 2001
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184325 , vital:44208 , xlink:href="https://doi.org/10.1211/0022357011775299"
- Description: A simple, accurate and cost effective method has been designed for the determination of lipid peroxidation in biological tissue samples. The method was a modification and improvement on existing methods available for lipid peroxidation determination. Solid-phase extraction was used to separate the thiobarbituric acid–malondialdehyde complex from thiobarbituric acidreactive substances and HPLC was performed using a C18 (Waters Spherisorb, 5 µm, 250¬4.6 mm i.d.) column to achieve isolation of the complex. The procedure was validated with respect to linearity of calibration (0.998), precision, sensitivity and limits of quantitation (1 nmol mL−1) and detection (0.5 nmol mL−1). Resorcinol was used as an external standard. The method was tested by inducing free radical generation with a known free radical generator, quinolinic acid, in rat brain homogenate. The results showed that the method presented allowed detection of lipid peroxidation products at concentrations in the nanomolar (nM) range compared with the micromolar (µM) range detected by other methods, thus rendering it suitable for use with biological samples. In addition, the modified method allowed for detection of the purified lipid peroxidation products, thus eliminating the possibility of simultaneous detection of impurities that absorb at the same wavelength.
- Full Text:
- Date Issued: 2001
- Authors: Anoopkumar-Dukie, Shailendra , Walker, Roderick B , Daya, Santylal
- Date: 2001
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184325 , vital:44208 , xlink:href="https://doi.org/10.1211/0022357011775299"
- Description: A simple, accurate and cost effective method has been designed for the determination of lipid peroxidation in biological tissue samples. The method was a modification and improvement on existing methods available for lipid peroxidation determination. Solid-phase extraction was used to separate the thiobarbituric acid–malondialdehyde complex from thiobarbituric acidreactive substances and HPLC was performed using a C18 (Waters Spherisorb, 5 µm, 250¬4.6 mm i.d.) column to achieve isolation of the complex. The procedure was validated with respect to linearity of calibration (0.998), precision, sensitivity and limits of quantitation (1 nmol mL−1) and detection (0.5 nmol mL−1). Resorcinol was used as an external standard. The method was tested by inducing free radical generation with a known free radical generator, quinolinic acid, in rat brain homogenate. The results showed that the method presented allowed detection of lipid peroxidation products at concentrations in the nanomolar (nM) range compared with the micromolar (µM) range detected by other methods, thus rendering it suitable for use with biological samples. In addition, the modified method allowed for detection of the purified lipid peroxidation products, thus eliminating the possibility of simultaneous detection of impurities that absorb at the same wavelength.
- Full Text:
- Date Issued: 2001
Melatonin alters the photodegradation of paracetamol
- Anoopkumar-Dukie, Shailendra, Glass, Beverley D, Walker, Roderick B, Daya, Santylal
- Authors: Anoopkumar-Dukie, Shailendra , Glass, Beverley D , Walker, Roderick B , Daya, Santylal
- Date: 2000
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184357 , vital:44211 , xlink:href="https://doi.org/10.1211/146080800128735755"
- Description: The effects of melatonin, a known free-radical scavenger, on paracetamol in the presence of UV irradiation was studied by use of HPLC. The experiments were performed in air and nitrogen. The results show that the rate of photodegradation of melatonin is faster in air than in nitrogen whereas that of paracetamol is similar in air and nitrogen. When the two drugs were combined, melatonin retarded the degradation of paracetamol for up to 6h in the presence of nitrogen. However, in the presence of air melatonin rapidly enhances the photodegradation of paracetamol. This study shows that a combination of melatonin and paracetamol in the presence of air and UV irradiation can lead to rapid inactivation of both agents, thus raising important concerns about the possible use of melatonin as sunscreen
- Full Text:
- Date Issued: 2000
- Authors: Anoopkumar-Dukie, Shailendra , Glass, Beverley D , Walker, Roderick B , Daya, Santylal
- Date: 2000
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184357 , vital:44211 , xlink:href="https://doi.org/10.1211/146080800128735755"
- Description: The effects of melatonin, a known free-radical scavenger, on paracetamol in the presence of UV irradiation was studied by use of HPLC. The experiments were performed in air and nitrogen. The results show that the rate of photodegradation of melatonin is faster in air than in nitrogen whereas that of paracetamol is similar in air and nitrogen. When the two drugs were combined, melatonin retarded the degradation of paracetamol for up to 6h in the presence of nitrogen. However, in the presence of air melatonin rapidly enhances the photodegradation of paracetamol. This study shows that a combination of melatonin and paracetamol in the presence of air and UV irradiation can lead to rapid inactivation of both agents, thus raising important concerns about the possible use of melatonin as sunscreen
- Full Text:
- Date Issued: 2000
Synthesis and characterization of ZnO nanoparticle synthesized by a microwave-assisted combustion method and catalytic activity for the removal of ortho-nitrophenol
- Assi, Navid, Mohammadi, Ali, Sadr Manuchehri, Q, Walker, Roderick B
- Authors: Assi, Navid , Mohammadi, Ali , Sadr Manuchehri, Q , Walker, Roderick B
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183850 , vital:44075 , xlink:href="https://doi.org/10.1080/19443994.2014.891083"
- Description: ZnO nanoparticles were manufactured using microwave-assisted combustion. The structural and morphological properties of the nanoparticles were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy, and Fourier transform infrared spectroscopy. Photocatalytic degradation of ortho-nitrophenol (O-NP) in aqueous solution using the synthesized nanoparticles was performed under UV–C irradiation and is reported for the first time. The effect of the initial O-NP concentration, amount of photocatalyst, pH, and salt was investigated during photodegradation. Analysis of the degraded samples using HPLC with UV detection revealed that photocatalysis in the presence of ZnO nanoparticles removed 98% of the O-NP in 5 h. In addition, the photocatalytic degradation kinetics of O-NP were studied, and the results suggest that the data are best fitted to pseudo-first-order kinetic and Langmuir–Hinshelwood models.
- Full Text:
- Date Issued: 2015
- Authors: Assi, Navid , Mohammadi, Ali , Sadr Manuchehri, Q , Walker, Roderick B
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183850 , vital:44075 , xlink:href="https://doi.org/10.1080/19443994.2014.891083"
- Description: ZnO nanoparticles were manufactured using microwave-assisted combustion. The structural and morphological properties of the nanoparticles were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy, and Fourier transform infrared spectroscopy. Photocatalytic degradation of ortho-nitrophenol (O-NP) in aqueous solution using the synthesized nanoparticles was performed under UV–C irradiation and is reported for the first time. The effect of the initial O-NP concentration, amount of photocatalyst, pH, and salt was investigated during photodegradation. Analysis of the degraded samples using HPLC with UV detection revealed that photocatalysis in the presence of ZnO nanoparticles removed 98% of the O-NP in 5 h. In addition, the photocatalytic degradation kinetics of O-NP were studied, and the results suggest that the data are best fitted to pseudo-first-order kinetic and Langmuir–Hinshelwood models.
- Full Text:
- Date Issued: 2015
Shoppers Drug Mart or poachers Drug Mart?
- Attaran, Amir, Walker, Roderick B
- Authors: Attaran, Amir , Walker, Roderick B
- Date: 2008
- Language: English
- Type: Article
- Identifier: vital:6346 , http://hdl.handle.net/10962/d1006018
- Description: [From the text]: Shoppers Drug Mart (Pharmaprix in Quebec) is a familiar Canadian institution. Its 1000 stores dot the landscape; no pharmacy chain is larger. In many Canadian communities, the corporation's well-staffed local franchises give patients quality care. However, in South Africa, the same corporation is potentially contributing to a public health disaster. In 2005, 2006 and twice in 2007, it has dispatched recruiters to that country, with the mission of plucking pharmacists from a continent that has far too few for its needs. Shoppers Drug Mart promises 6-figure salaries and help to establish a brilliant career in Canada. The carrot, and the helping hand holding it, are huge.
- Full Text:
- Date Issued: 2008
- Authors: Attaran, Amir , Walker, Roderick B
- Date: 2008
- Language: English
- Type: Article
- Identifier: vital:6346 , http://hdl.handle.net/10962/d1006018
- Description: [From the text]: Shoppers Drug Mart (Pharmaprix in Quebec) is a familiar Canadian institution. Its 1000 stores dot the landscape; no pharmacy chain is larger. In many Canadian communities, the corporation's well-staffed local franchises give patients quality care. However, in South Africa, the same corporation is potentially contributing to a public health disaster. In 2005, 2006 and twice in 2007, it has dispatched recruiters to that country, with the mission of plucking pharmacists from a continent that has far too few for its needs. Shoppers Drug Mart promises 6-figure salaries and help to establish a brilliant career in Canada. The carrot, and the helping hand holding it, are huge.
- Full Text:
- Date Issued: 2008
Simultaneous liposomal encapsulation of antibiotics and proteins: co-loading and characterization of rifampicin and Human Serum Albumin in soy-liposomes
- Bapolisi, Alain M, Nkanga, Christian I, Walker, Roderick B, Krause, Rui W M
- Authors: Bapolisi, Alain M , Nkanga, Christian I , Walker, Roderick B , Krause, Rui W M
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/148617 , vital:38755 , https://doi.org/10.1016/j.jddst.2020.101751
- Description: The recurrent development of resistance to antimicrobial agents threatens the ability for successful treatment of infectious diseases. Hydrophobic antibiotics such as rifampicin (Rif) are particularly affected due to poor bioavailability. On the other hand, proteins play important roles in drug delivery and release. Further, the combination of antimicrobials with therapeutic proteins and their encapsulation in liposomes seems a promising approach for improvement of antimicrobial efficacy. This study aimed to encapsulate Rif simultaneously with a large protein, Human Serum Albumin (HSA) in liposomes made from an inexpensive crude soy lecithin (CSL).
- Full Text:
- Date Issued: 2020
- Authors: Bapolisi, Alain M , Nkanga, Christian I , Walker, Roderick B , Krause, Rui W M
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/148617 , vital:38755 , https://doi.org/10.1016/j.jddst.2020.101751
- Description: The recurrent development of resistance to antimicrobial agents threatens the ability for successful treatment of infectious diseases. Hydrophobic antibiotics such as rifampicin (Rif) are particularly affected due to poor bioavailability. On the other hand, proteins play important roles in drug delivery and release. Further, the combination of antimicrobials with therapeutic proteins and their encapsulation in liposomes seems a promising approach for improvement of antimicrobial efficacy. This study aimed to encapsulate Rif simultaneously with a large protein, Human Serum Albumin (HSA) in liposomes made from an inexpensive crude soy lecithin (CSL).
- Full Text:
- Date Issued: 2020
DSC screening of potential prochlorperazine-excipient interactions in preformulation studies
- Brown, Michael E, Antunes, Edith M, Glass, Beverley M, Lebete, Mosimotsana L, Walker, Roderick B
- Authors: Brown, Michael E , Antunes, Edith M , Glass, Beverley M , Lebete, Mosimotsana L , Walker, Roderick B
- Date: 1999
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184367 , vital:44212 , xlink:href="https://doi.org/10.1023/A:1010150305542"
- Description: Differential scanning calorimetry was used to examine the thermal behaviour of mixtures of the drug prochlorperazine with standard excipients, to assess potential interactions, and of mixtures with cyclodextrins, to investigate inclusion complexation which could increase the photostability of the drug. For most of the excipients (magnesium stearate, stearic acid, Explotab®, Ac-Di-Sol®, Encompress® and Ludipress®, lactose and Starch 1500) disappearance or broadening of the melting endotherm of the drug indicated interactions. Lubritab® was the only 'inert' excipient tested. Mixtures of prochlorperazine and the cyclodextrins gave incomplete inclusion complexation as shown by only partial disappearance of the melting endotherm of the drug.
- Full Text: false
- Date Issued: 1999
- Authors: Brown, Michael E , Antunes, Edith M , Glass, Beverley M , Lebete, Mosimotsana L , Walker, Roderick B
- Date: 1999
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184367 , vital:44212 , xlink:href="https://doi.org/10.1023/A:1010150305542"
- Description: Differential scanning calorimetry was used to examine the thermal behaviour of mixtures of the drug prochlorperazine with standard excipients, to assess potential interactions, and of mixtures with cyclodextrins, to investigate inclusion complexation which could increase the photostability of the drug. For most of the excipients (magnesium stearate, stearic acid, Explotab®, Ac-Di-Sol®, Encompress® and Ludipress®, lactose and Starch 1500) disappearance or broadening of the melting endotherm of the drug indicated interactions. Lubritab® was the only 'inert' excipient tested. Mixtures of prochlorperazine and the cyclodextrins gave incomplete inclusion complexation as shown by only partial disappearance of the melting endotherm of the drug.
- Full Text: false
- Date Issued: 1999
Analytical methods for the quantitative determination of oxytocin
- Chaibva, Faith A, Walker, Roderick B
- Authors: Chaibva, Faith A , Walker, Roderick B
- Date: 2010
- Language: English
- Type: Article
- Identifier: vital:6353 , http://hdl.handle.net/10962/d1006037
- Description: Oxytocin is a clinically important nonapeptide that is used for the induction and/or augmentation of labor and is normally administered as a slow intravenous infusion diluted with normal saline or Ringer’s lactate solution. Oxytocin is also indicated for use in the prevention and treatment of post partum hemorrhage and may be administered via either the intramuscular or intravenous routes in order to increase uterine tone and/or reduce bleeding. The analysis of oxytocin in different media has evolved over the past 30 years with the result that more sophisticated, selective and sensitive techniques are used for the determination of the compound. A variety of techniques have been applied to the determination of oxytocin in different matrices ranging from simple paper chromatography to hyphenated liquid chromatographic such as liquid chromatography coupled with mass-spectrometry. Additionally enzyme linked immuno-sorbent assays (ELISA) and radio immuno-assays (RIA) are used for the determination of low concentrations of oxytocin in biological matrices. This manuscript provides a systematic survey of the analytical methods that have been reported for isolation and quantitation of oxytocin in different matrices.
- Full Text:
- Date Issued: 2010
- Authors: Chaibva, Faith A , Walker, Roderick B
- Date: 2010
- Language: English
- Type: Article
- Identifier: vital:6353 , http://hdl.handle.net/10962/d1006037
- Description: Oxytocin is a clinically important nonapeptide that is used for the induction and/or augmentation of labor and is normally administered as a slow intravenous infusion diluted with normal saline or Ringer’s lactate solution. Oxytocin is also indicated for use in the prevention and treatment of post partum hemorrhage and may be administered via either the intramuscular or intravenous routes in order to increase uterine tone and/or reduce bleeding. The analysis of oxytocin in different media has evolved over the past 30 years with the result that more sophisticated, selective and sensitive techniques are used for the determination of the compound. A variety of techniques have been applied to the determination of oxytocin in different matrices ranging from simple paper chromatography to hyphenated liquid chromatographic such as liquid chromatography coupled with mass-spectrometry. Additionally enzyme linked immuno-sorbent assays (ELISA) and radio immuno-assays (RIA) are used for the determination of low concentrations of oxytocin in biological matrices. This manuscript provides a systematic survey of the analytical methods that have been reported for isolation and quantitation of oxytocin in different matrices.
- Full Text:
- Date Issued: 2010
Development and validation of a stability-indicating analytical method for the quantitation of oxytocin in pharmaceutical dosage forms
- Chaibva, Faith A, Walker, Roderick B
- Authors: Chaibva, Faith A , Walker, Roderick B
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6349 , http://hdl.handle.net/10962/d1006030
- Description: A single stability-indicating assay for oxytocin (OT) in pharmaceutical dosage forms using gradient elution over 21 min has been reported in the literature. Furthermore, published and compendial methods for the analysis of OT containing dosage forms also involve using HPLC with gradient elution and complicated mobile phases that include hydrophobic ion pairing agents. A simple isocratic and stability-indicating assay was developed and validated. The conditions are as follows, column: Phenomenex® C18 Hypersil, 5 μm packing, 4.6 mm × 150 mm with acetonitrile–phosphate buffer (pH 5; 0.08 M) (20:80) as the mobile phase with UV detection at 220 nm The method was found to be specific for OT in the presence of degradation products and chlorbutol (preservative) with an overall analytical run time of 16 min. Accuracy was determined to be 0.77–1.18% bias for all samples tested. Intra-assay precision (repeatability) was found to be 0.22–1.04%R.S.D. while the inter-day precision (intermediate precision) was found to be 1.27–1.68%R.S.D. for the samples studied. The calibration curve was found to be linear with the equation y = 1.81x + 0.02 and a linear regression coefficient of 0.9991 over the range 0.4–12.0 IU/ml. The LOD and the LOQ were determined to be 0.1 and 0.4 IU/ml, respectively. Syntocinon®, a commercially available dosage form of OT was assayed resulting in 100.5–106.6% recovery of the label claim and an average of 10.04 IU/ml.
- Full Text:
- Date Issued: 2006
- Authors: Chaibva, Faith A , Walker, Roderick B
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6349 , http://hdl.handle.net/10962/d1006030
- Description: A single stability-indicating assay for oxytocin (OT) in pharmaceutical dosage forms using gradient elution over 21 min has been reported in the literature. Furthermore, published and compendial methods for the analysis of OT containing dosage forms also involve using HPLC with gradient elution and complicated mobile phases that include hydrophobic ion pairing agents. A simple isocratic and stability-indicating assay was developed and validated. The conditions are as follows, column: Phenomenex® C18 Hypersil, 5 μm packing, 4.6 mm × 150 mm with acetonitrile–phosphate buffer (pH 5; 0.08 M) (20:80) as the mobile phase with UV detection at 220 nm The method was found to be specific for OT in the presence of degradation products and chlorbutol (preservative) with an overall analytical run time of 16 min. Accuracy was determined to be 0.77–1.18% bias for all samples tested. Intra-assay precision (repeatability) was found to be 0.22–1.04%R.S.D. while the inter-day precision (intermediate precision) was found to be 1.27–1.68%R.S.D. for the samples studied. The calibration curve was found to be linear with the equation y = 1.81x + 0.02 and a linear regression coefficient of 0.9991 over the range 0.4–12.0 IU/ml. The LOD and the LOQ were determined to be 0.1 and 0.4 IU/ml, respectively. Syntocinon®, a commercially available dosage form of OT was assayed resulting in 100.5–106.6% recovery of the label claim and an average of 10.04 IU/ml.
- Full Text:
- Date Issued: 2006
The comparison of in vitro release methods for the evaluation of oxytocin release from Pluronic® F127 parenteral formulations
- Chaibva, Faith A, Walker, Roderick B
- Authors: Chaibva, Faith A , Walker, Roderick B
- Date: 2007
- Language: English
- Type: Article
- Identifier: vital:6351 , http://hdl.handle.net/10962/d1006033
- Description: The objective of these studies was to develop a discriminatory in vitro release test for assessing formulation factors that may affect oxytocin (OT) release during formulation development studies of a Pluronic® F127 OT in situ gel-forming parenteral dosage form. An appropriate release assessment method should be able to discriminate between the performance of different formulation compositions (1, 2), and this was the primary criterion used for selection of an appropriate test procedure during the test method development process. ANOVA and the difference (f1) and similarity (f2)factors were used to evaluate the discriminatory behavior of different test methods that were investigated in these studies. The in vitro release tests that were investigated included the use of USP Apparatus 1, 2, and 3; a dialysis bag in USP Apparatus 2; and a membrane-less diffusion method. It was concluded that the use of USP Apparatus 3 was best able to discriminate between OT release for the different formulations tested. USP Apparatus 3 was thus considered the most suitable in vitro release test apparatus for studying formulation factors affecting OT release during the development of a parenteral dosage form prepared using Pluronic® F127.
- Full Text:
- Date Issued: 2007
- Authors: Chaibva, Faith A , Walker, Roderick B
- Date: 2007
- Language: English
- Type: Article
- Identifier: vital:6351 , http://hdl.handle.net/10962/d1006033
- Description: The objective of these studies was to develop a discriminatory in vitro release test for assessing formulation factors that may affect oxytocin (OT) release during formulation development studies of a Pluronic® F127 OT in situ gel-forming parenteral dosage form. An appropriate release assessment method should be able to discriminate between the performance of different formulation compositions (1, 2), and this was the primary criterion used for selection of an appropriate test procedure during the test method development process. ANOVA and the difference (f1) and similarity (f2)factors were used to evaluate the discriminatory behavior of different test methods that were investigated in these studies. The in vitro release tests that were investigated included the use of USP Apparatus 1, 2, and 3; a dialysis bag in USP Apparatus 2; and a membrane-less diffusion method. It was concluded that the use of USP Apparatus 3 was best able to discriminate between OT release for the different formulations tested. USP Apparatus 3 was thus considered the most suitable in vitro release test apparatus for studying formulation factors affecting OT release during the development of a parenteral dosage form prepared using Pluronic® F127.
- Full Text:
- Date Issued: 2007
Swelling, erosion and drug release characteristics of salbutamol sulfate from hydroxypropyl methylcellulose-based matrix tablets
- Chaibva, Faith A, Khamanga, Sandile M, Walker, Roderick B
- Authors: Chaibva, Faith A , Khamanga, Sandile M , Walker, Roderick B
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184139 , vital:44177 , xlink:href="https://doi.org/10.3109/03639045.2010.488648"
- Description: Background: Hydrophilic matrix formulations are important and simple technologies that are used to manufacture sustained release dosage forms. Method: Hydroxypropyl methylcellulose-based matrix tablets, with and without additives, were manufactured to investigate the rate of hydration, rate of erosion, and rate and mechanism of drug release. Scanning electron microscopy was used to assess changes in the microstructure of the tablets during drug release testing and whether these changes could be related to the rate of drug release from the formulations. Results: The results revealed that the rate of hydration and erosion was dependent on the polymer combination(s) used, which in turn affected the rate and mechanism of drug release from these formulations. It was also apparent that changes in the microstructure of matrix tablets could be related to the different rates of drug release that were observed from the test formulations. Conclusion: The use of scanning electron microscopy provides useful information to further understand drug release mechanisms from matrix tablets.
- Full Text:
- Date Issued: 2010
- Authors: Chaibva, Faith A , Khamanga, Sandile M , Walker, Roderick B
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184139 , vital:44177 , xlink:href="https://doi.org/10.3109/03639045.2010.488648"
- Description: Background: Hydrophilic matrix formulations are important and simple technologies that are used to manufacture sustained release dosage forms. Method: Hydroxypropyl methylcellulose-based matrix tablets, with and without additives, were manufactured to investigate the rate of hydration, rate of erosion, and rate and mechanism of drug release. Scanning electron microscopy was used to assess changes in the microstructure of the tablets during drug release testing and whether these changes could be related to the rate of drug release from the formulations. Results: The results revealed that the rate of hydration and erosion was dependent on the polymer combination(s) used, which in turn affected the rate and mechanism of drug release from these formulations. It was also apparent that changes in the microstructure of matrix tablets could be related to the different rates of drug release that were observed from the test formulations. Conclusion: The use of scanning electron microscopy provides useful information to further understand drug release mechanisms from matrix tablets.
- Full Text:
- Date Issued: 2010
Optimization of salbutamol sulfate dissolution from sustained release matrix formulations using an artificial neural network
- Chaibva, Faith A, Burton, Michael H, Walker, Roderick B
- Authors: Chaibva, Faith A , Burton, Michael H , Walker, Roderick B
- Date: 2010
- Subjects: Neural networks (Computer science)
- Language: English
- Type: Article
- Identifier: vital:6352 , http://hdl.handle.net/10962/d1006034
- Description: An artificial neural network was used to optimize the release of salbutamol sulfate from hydrophilic matrix formulations. Model formulations to be used for training, testing and validating the neural network were manufactured with the aid of a central composite design with varying the levels of Methocel® K100M, xanthan gum, Carbopol® 974P and Surelease® as the input factors. In vitro dissolution time profiles at six different sampling times were used as target data in training the neural network for formulation optimization. A multi layer perceptron with one hidden layer was constructed using Matlab®, and the number of nodes in the hidden layer was optimized by trial and error to develop a model with the best predictive ability. The results revealed that a neural network with nine nodes was optimal for developing and optimizing formulations. Simulations undertaken with the training data revealed that the constructed model was useable. The optimized neural network was used for optimization of formulation with desirable release characteristics and the results indicated that there was agreement between the predicted formulation and the manufactured formulation. This work illustrates the possible utility of artificial neural networks for the optimization of pharmaceutical formulations with desirable performance characteristics.
- Full Text:
- Date Issued: 2010
- Authors: Chaibva, Faith A , Burton, Michael H , Walker, Roderick B
- Date: 2010
- Subjects: Neural networks (Computer science)
- Language: English
- Type: Article
- Identifier: vital:6352 , http://hdl.handle.net/10962/d1006034
- Description: An artificial neural network was used to optimize the release of salbutamol sulfate from hydrophilic matrix formulations. Model formulations to be used for training, testing and validating the neural network were manufactured with the aid of a central composite design with varying the levels of Methocel® K100M, xanthan gum, Carbopol® 974P and Surelease® as the input factors. In vitro dissolution time profiles at six different sampling times were used as target data in training the neural network for formulation optimization. A multi layer perceptron with one hidden layer was constructed using Matlab®, and the number of nodes in the hidden layer was optimized by trial and error to develop a model with the best predictive ability. The results revealed that a neural network with nine nodes was optimal for developing and optimizing formulations. Simulations undertaken with the training data revealed that the constructed model was useable. The optimized neural network was used for optimization of formulation with desirable release characteristics and the results indicated that there was agreement between the predicted formulation and the manufactured formulation. This work illustrates the possible utility of artificial neural networks for the optimization of pharmaceutical formulations with desirable performance characteristics.
- Full Text:
- Date Issued: 2010
Formulation and Characterisation of a Combination Captopril and Hydrochlorothiazide Microparticulate Dosage Form
- Chikukwa, Mellisa T R, Walker, Roderick B, Khamanga, Sandile M
- Authors: Chikukwa, Mellisa T R , Walker, Roderick B , Khamanga, Sandile M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183200 , vital:43926 , xlink:href="https://doi.org/10.3390/pharmaceutics12080712"
- Description: Cardiovascular diseases such as hypertension and cardiac failure in South African children and adolescents are effectively managed long term, using a combination treatment of captopril and hydrochlorothiazide. The majority of commercially available pharmaceutical products are designed for adult patients and require extemporaneous manipulation, prior to administration to paediatric patients. There is a need to develop an age appropriate microparticulate dosing technology that is easy to swallow, dose and alter doses whilst overcoming the pharmacokinetic challenges of short half-life and biphasic pharmacokinetic disposition exhibited by hydrochlorothiazide and captopril. An emulsion solvent evaporation approach using different combinations of polymers was used to manufacture captopril and hydrochlorothiazide microparticles. Design of experiments was used to develop and analyse experimental data, and identifyoptimum formulation and process conditions for the preparation of the microparticles. Characterisation studies to establish encapsulation efficiency, in vitro release, shape, size and morphology of the microparticles were undertaken. The microparticles produced were in the micrometre size range, with an encapsulation efficiency >75% for both hydrochlorothiazide and captopril. The microparticulate technology is able to offer potential resolution to the half-life mediated dosing frequency of captopril as sustained release of the molecule was observed over a 12-h period. The release of hydrochlorothiazide of >80% suggests an improvement in solubility limited dissolution.
- Full Text:
- Date Issued: 2020
- Authors: Chikukwa, Mellisa T R , Walker, Roderick B , Khamanga, Sandile M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183200 , vital:43926 , xlink:href="https://doi.org/10.3390/pharmaceutics12080712"
- Description: Cardiovascular diseases such as hypertension and cardiac failure in South African children and adolescents are effectively managed long term, using a combination treatment of captopril and hydrochlorothiazide. The majority of commercially available pharmaceutical products are designed for adult patients and require extemporaneous manipulation, prior to administration to paediatric patients. There is a need to develop an age appropriate microparticulate dosing technology that is easy to swallow, dose and alter doses whilst overcoming the pharmacokinetic challenges of short half-life and biphasic pharmacokinetic disposition exhibited by hydrochlorothiazide and captopril. An emulsion solvent evaporation approach using different combinations of polymers was used to manufacture captopril and hydrochlorothiazide microparticles. Design of experiments was used to develop and analyse experimental data, and identifyoptimum formulation and process conditions for the preparation of the microparticles. Characterisation studies to establish encapsulation efficiency, in vitro release, shape, size and morphology of the microparticles were undertaken. The microparticles produced were in the micrometre size range, with an encapsulation efficiency >75% for both hydrochlorothiazide and captopril. The microparticulate technology is able to offer potential resolution to the half-life mediated dosing frequency of captopril as sustained release of the molecule was observed over a 12-h period. The release of hydrochlorothiazide of >80% suggests an improvement in solubility limited dissolution.
- Full Text:
- Date Issued: 2020
Assessment of taste masking of captopril by ion-exchange resins using electronic gustatory system
- Chikukwa, Mellisa T R, Wesoly, Malgorzata, Korzeniowska, Aleksandra B, Ciosek-Skibinska, Patrycja, Walker, Roderick B, Khamanga, Sandile M M
- Authors: Chikukwa, Mellisa T R , Wesoly, Malgorzata , Korzeniowska, Aleksandra B , Ciosek-Skibinska, Patrycja , Walker, Roderick B , Khamanga, Sandile M M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184710 , vital:44265 , xlink:href="https://doi.org/10.1080/10837450.2019.1687520"
- Description: The objective of the study was to mask the unpleasant taste of captopril (CPT). Taste masking was achieved by complexation of CPT with a basic ion exchange resin, Dowex® 66, using the batch method. Dowex® 66 was used for the adsorption of CPT, and physical and chemical parameters of the CPT resinates complex were evaluated. A central composite design was used to generate the experiments for the manufacture of resinates using different process and formulation variables. In vitro dissolution studies were performed for 2 h in 0.01N HCl (pH 1.6) using USP Apparatus I. The compatibility of CPT and the resin was evaluated by Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), and powder X-ray diffraction (PXRD). The resinates were evaluated for micromeritic properties and further characterised using FTIR, DSC, and PXRD. Response surface methodology was used to determine the significance of input variables on the CPT content and release. The CPT resin ratio was found to have a significant impact on content of the resinates and on CPT release. The formulations were also studied for taste masking ability by means of an electronic gustatory system – electronic tongue.
- Full Text:
- Date Issued: 2020
- Authors: Chikukwa, Mellisa T R , Wesoly, Malgorzata , Korzeniowska, Aleksandra B , Ciosek-Skibinska, Patrycja , Walker, Roderick B , Khamanga, Sandile M M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184710 , vital:44265 , xlink:href="https://doi.org/10.1080/10837450.2019.1687520"
- Description: The objective of the study was to mask the unpleasant taste of captopril (CPT). Taste masking was achieved by complexation of CPT with a basic ion exchange resin, Dowex® 66, using the batch method. Dowex® 66 was used for the adsorption of CPT, and physical and chemical parameters of the CPT resinates complex were evaluated. A central composite design was used to generate the experiments for the manufacture of resinates using different process and formulation variables. In vitro dissolution studies were performed for 2 h in 0.01N HCl (pH 1.6) using USP Apparatus I. The compatibility of CPT and the resin was evaluated by Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), and powder X-ray diffraction (PXRD). The resinates were evaluated for micromeritic properties and further characterised using FTIR, DSC, and PXRD. Response surface methodology was used to determine the significance of input variables on the CPT content and release. The CPT resin ratio was found to have a significant impact on content of the resinates and on CPT release. The formulations were also studied for taste masking ability by means of an electronic gustatory system – electronic tongue.
- Full Text:
- Date Issued: 2020
The effect of variations in pH and temperature on stability of melatonin in aqueous solution
- Daya, Santylal, Walker, Roderick B, Glass, Beverley D, Anoopkumar-Dukie, Shailendra
- Authors: Daya, Santylal , Walker, Roderick B , Glass, Beverley D , Anoopkumar-Dukie, Shailendra
- Date: 2001
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184314 , vital:44207 , xlink:href="https://doi.org/10.1034/j.1600-079x.2001.310209.x"
- Description: Melatonin (N-acetyl-5-methoxytryptamine) has a diverse range of functions, including the control of neuroendocrine events. A number of studies have shown that melatonin may be of potential benefit for the treatment of insomnia, as well as neurodegenerative disorders. At present, there are numerous dosage forms of melatonin, with the oral route of administration being most popular. Presently, there is little information on the stability of melatonin over a pH range. With the changes in pH in the gastro-intestinal tract, as well as in different experimental conditions, information on the stability of melatonin would be important. We used a high-performance liquid chromatography method to determine the stability of melatonin solutions over a pH range (1.2–12) at room temperature and at 37°C over a period of 21 days. The results show that no melatonin degradation occurred in the first 2 days. From days 3 to 21, there was a gradual decline in melatonin at all pHs, with the decline not exceeding 30%. No decline in melatonin levels occurred in the first 2 days at 37°C. From days 3 to 21, melatonin levels declined gradually, with the decline not exceeding 29%.
- Full Text:
- Date Issued: 2001
- Authors: Daya, Santylal , Walker, Roderick B , Glass, Beverley D , Anoopkumar-Dukie, Shailendra
- Date: 2001
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184314 , vital:44207 , xlink:href="https://doi.org/10.1034/j.1600-079x.2001.310209.x"
- Description: Melatonin (N-acetyl-5-methoxytryptamine) has a diverse range of functions, including the control of neuroendocrine events. A number of studies have shown that melatonin may be of potential benefit for the treatment of insomnia, as well as neurodegenerative disorders. At present, there are numerous dosage forms of melatonin, with the oral route of administration being most popular. Presently, there is little information on the stability of melatonin over a pH range. With the changes in pH in the gastro-intestinal tract, as well as in different experimental conditions, information on the stability of melatonin would be important. We used a high-performance liquid chromatography method to determine the stability of melatonin solutions over a pH range (1.2–12) at room temperature and at 37°C over a period of 21 days. The results show that no melatonin degradation occurred in the first 2 days. From days 3 to 21, there was a gradual decline in melatonin at all pHs, with the decline not exceeding 30%. No decline in melatonin levels occurred in the first 2 days at 37°C. From days 3 to 21, melatonin levels declined gradually, with the decline not exceeding 29%.
- Full Text:
- Date Issued: 2001
Cyanide-induced free radical production and lipid peroxidation in rat brain homogenate is reduced by aspirin
- Daya, Santylal, Walker, Roderick B, Anoopkumar-Dukie, Shailendra
- Authors: Daya, Santylal , Walker, Roderick B , Anoopkumar-Dukie, Shailendra
- Date: 2000
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184346 , vital:44210 , xlink:href="https://doi.org/10.1007/BF02674529"
- Description: The neuroprotective properties of aspirin were investigated using cyanide-induced neurotoxicity as model. Cyanide, a known neurotoxic agent significantly increased lipid peroxidation and superoxide anion levels in rat brain homogenate in a concentration-dependent manner (0.25–1.0 mM). When homogenate, containing 1.0 mM KCN was cotreated with aspirin (1.0 mM) there was a significant decrease in lipid peroxidation. Aspirin (0.5 mM and 1.0 mM) also significantly reduced KCN-induced superoxide anion generation. The results of the present report therefore indicate a neuroprotective role for aspirin.
- Full Text:
- Date Issued: 2000
- Authors: Daya, Santylal , Walker, Roderick B , Anoopkumar-Dukie, Shailendra
- Date: 2000
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184346 , vital:44210 , xlink:href="https://doi.org/10.1007/BF02674529"
- Description: The neuroprotective properties of aspirin were investigated using cyanide-induced neurotoxicity as model. Cyanide, a known neurotoxic agent significantly increased lipid peroxidation and superoxide anion levels in rat brain homogenate in a concentration-dependent manner (0.25–1.0 mM). When homogenate, containing 1.0 mM KCN was cotreated with aspirin (1.0 mM) there was a significant decrease in lipid peroxidation. Aspirin (0.5 mM and 1.0 mM) also significantly reduced KCN-induced superoxide anion generation. The results of the present report therefore indicate a neuroprotective role for aspirin.
- Full Text:
- Date Issued: 2000
Evaluation of the proposed FDA pilot-dose response methodology for topical corticosteroid bioequivalence testing
- Demana, Patrick H, Smith, Eric W, Walker, Roderick B, Haigh, John M, Kanfer, Isadore
- Authors: Demana, Patrick H , Smith, Eric W , Walker, Roderick B , Haigh, John M , Kanfer, Isadore
- Date: 1997
- Language: English
- Type: Article
- Identifier: vital:6356 , http://hdl.handle.net/10962/d1006047
- Description: The American FDA has recently released a Guidance document for topical corticosteroid bioequivalence testing. The purpose of this study was to evaluate the recommendations of this document for appropriateness. The new specifications require a dose-vasoconstriction response estimation by the use of a Minolta chromameter in a preliminary pilot study to determine the parameters for use in a pivotal bioequivalence study. Methods. The visually-assessed human skin blanching assay methodology routinely practiced in our laboratories was modified to comply with the requirements of the pilot study so that visual and chromameter data could be compared. Two different cream formulations, each containing 0.12% betamethasone 17-valerate, were used for this comparison. Results. Visual data showed the expected rank order of AUC values for most dose durations whereas the chromameter data did not show similar results. The expected rank order of AUC values for both chromameter and visual data was not observed at very short dose durations. In fitting the data to pharmacodynamic models, equivalent goodness of fit criteria were obtained when several different parameter estimates were used in the model definition, however the visual data were best described by the sigmoid E[subscript max] model while the chromameter data were best described by the simple E[subscript max] model. Conclusions. The E[subscript max] values predicted by the models were close to the observed values for both data sets and, in addition, excellent correlation between the AUC values and the maximum blanching response (R[subscript max]) (r > 0.95) was noted for both methods of assessment. The chromameter ED[subscript 50] values determined in this study were approximately 2 hours for both preparations. At this dose duration the instrument would not be sensitive enough to distinguish between weak blanching responses and normal skin for bioequivalence assessment purposes.
- Full Text: false
- Date Issued: 1997
- Authors: Demana, Patrick H , Smith, Eric W , Walker, Roderick B , Haigh, John M , Kanfer, Isadore
- Date: 1997
- Language: English
- Type: Article
- Identifier: vital:6356 , http://hdl.handle.net/10962/d1006047
- Description: The American FDA has recently released a Guidance document for topical corticosteroid bioequivalence testing. The purpose of this study was to evaluate the recommendations of this document for appropriateness. The new specifications require a dose-vasoconstriction response estimation by the use of a Minolta chromameter in a preliminary pilot study to determine the parameters for use in a pivotal bioequivalence study. Methods. The visually-assessed human skin blanching assay methodology routinely practiced in our laboratories was modified to comply with the requirements of the pilot study so that visual and chromameter data could be compared. Two different cream formulations, each containing 0.12% betamethasone 17-valerate, were used for this comparison. Results. Visual data showed the expected rank order of AUC values for most dose durations whereas the chromameter data did not show similar results. The expected rank order of AUC values for both chromameter and visual data was not observed at very short dose durations. In fitting the data to pharmacodynamic models, equivalent goodness of fit criteria were obtained when several different parameter estimates were used in the model definition, however the visual data were best described by the sigmoid E[subscript max] model while the chromameter data were best described by the simple E[subscript max] model. Conclusions. The E[subscript max] values predicted by the models were close to the observed values for both data sets and, in addition, excellent correlation between the AUC values and the maximum blanching response (R[subscript max]) (r > 0.95) was noted for both methods of assessment. The chromameter ED[subscript 50] values determined in this study were approximately 2 hours for both preparations. At this dose duration the instrument would not be sensitive enough to distinguish between weak blanching responses and normal skin for bioequivalence assessment purposes.
- Full Text: false
- Date Issued: 1997
Ultrasound-Triggered Release of 5-Fluorouracil from Soy Lecithin Echogenic Liposomes
- Ezekiel, Charles I, Bapolisi, Alain M, Walker, Roderick B, Krause, Rui W M
- Authors: Ezekiel, Charles I , Bapolisi, Alain M , Walker, Roderick B , Krause, Rui W M
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183115 , vital:43913 , xlink:href="https://doi.org/10.3390/pharmaceutics13060821"
- Description: Colorectal cancer is the third most diagnosed cancer and the second leading cause of death. The use of 5-fluorouracil (5-FU) has been the major chemotherapeutic treatment for colorectal cancer patients. However, the efficacy of 5-FU is limited by drug resistance, and bone marrow toxicity through high-level expression of thymidylate synthase, justifying the need for improvement of the therapeutic index. In this study, the effects of ultrasound on echogenic 5-FU encapsulated crude soy liposomes were investigated for their potential to address these challenges. Liposomes were prepared by thin-film hydration using crude soy lecithin and cholesterol. Argon gas was entrapped in the liposomes for sonosensitivity (that is, responsiveness to ultrasound). The nanoparticles were characterized for particle size and morphology. The physicochemical properties were also evaluated using differential scanning calorimetry, Fourier transform infrared and X-ray diffraction. The release profile of 5-FU was assessed with and without 20 kHz low-frequency ultrasound waves at various amplitudes and exposure times. The result reveal that 5-FU-loaded liposomes were spherical with an encapsulation efficiency of approximately 60%. Approximately 65% of 5-FU was released at the highest amplitude and exposure time was investigated. The results are encouraging for the stimulated and controlled release of 5-FU for the management of colorectal cancer.
- Full Text:
- Date Issued: 2021
- Authors: Ezekiel, Charles I , Bapolisi, Alain M , Walker, Roderick B , Krause, Rui W M
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183115 , vital:43913 , xlink:href="https://doi.org/10.3390/pharmaceutics13060821"
- Description: Colorectal cancer is the third most diagnosed cancer and the second leading cause of death. The use of 5-fluorouracil (5-FU) has been the major chemotherapeutic treatment for colorectal cancer patients. However, the efficacy of 5-FU is limited by drug resistance, and bone marrow toxicity through high-level expression of thymidylate synthase, justifying the need for improvement of the therapeutic index. In this study, the effects of ultrasound on echogenic 5-FU encapsulated crude soy liposomes were investigated for their potential to address these challenges. Liposomes were prepared by thin-film hydration using crude soy lecithin and cholesterol. Argon gas was entrapped in the liposomes for sonosensitivity (that is, responsiveness to ultrasound). The nanoparticles were characterized for particle size and morphology. The physicochemical properties were also evaluated using differential scanning calorimetry, Fourier transform infrared and X-ray diffraction. The release profile of 5-FU was assessed with and without 20 kHz low-frequency ultrasound waves at various amplitudes and exposure times. The result reveal that 5-FU-loaded liposomes were spherical with an encapsulation efficiency of approximately 60%. Approximately 65% of 5-FU was released at the highest amplitude and exposure time was investigated. The results are encouraging for the stimulated and controlled release of 5-FU for the management of colorectal cancer.
- Full Text:
- Date Issued: 2021
Forced degradation studies of clobetasol 17‐propionate in methanol, propylene glycol, as bulk drug and cream formulations by RP‐HPLC
- Fauzee, Ayesha F, Walker, Roderick B
- Authors: Fauzee, Ayesha F , Walker, Roderick B
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184005 , vital:44154 , xlink:href="https://doi.org/10.1002/jssc.201200969"
- Description: A rapid, simple, stability-indicating forced degradation study of clobetasol 17-propionate was conducted using RP-HPLC. The method was used to analyze clobetasol 17-propionate in methanol, propylene glycol, and a cream formulation. Isocratic elution of clobetasol and its degradation products was achieved using a Nova-Pak® 4 μm C18 150 mm × 3.9 mm id cartridge column and a mobile phase of methanol: water (68:32 v/v) at a flow rate of 0.9 mL min−1. Quantitation was achieved with UV detection at 239 nm. Nondegraded clobetasol was eluted at a retention time of 6.0 min. Clobetasol 17-propionate was subjected to different stress conditions viz., acidic, basic, heat, oxidation, light, and neutral hydrolysis. The greatest degradation occurred under strong base and oxidative conditions. Strong base-degraded clobetasol produced additional peaks at retention times of 1.8, 4.0, 5.0, and 8.0 min and clobetasol oxidation degradation peaks eluted at 2.2 and 24 min. Complete validation was performed for linearity, accuracy, and precision over the concentration range 0.15–15 μg mL−1. All data were analyzed statistically and this RP-HPLC method proved to be accurate, precise, linear, and stability indicating for the quantitation of clobetasol 17-propionate in methanol, propylene glycol, and cream formulations.
- Full Text:
- Date Issued: 2013
- Authors: Fauzee, Ayesha F , Walker, Roderick B
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184005 , vital:44154 , xlink:href="https://doi.org/10.1002/jssc.201200969"
- Description: A rapid, simple, stability-indicating forced degradation study of clobetasol 17-propionate was conducted using RP-HPLC. The method was used to analyze clobetasol 17-propionate in methanol, propylene glycol, and a cream formulation. Isocratic elution of clobetasol and its degradation products was achieved using a Nova-Pak® 4 μm C18 150 mm × 3.9 mm id cartridge column and a mobile phase of methanol: water (68:32 v/v) at a flow rate of 0.9 mL min−1. Quantitation was achieved with UV detection at 239 nm. Nondegraded clobetasol was eluted at a retention time of 6.0 min. Clobetasol 17-propionate was subjected to different stress conditions viz., acidic, basic, heat, oxidation, light, and neutral hydrolysis. The greatest degradation occurred under strong base and oxidative conditions. Strong base-degraded clobetasol produced additional peaks at retention times of 1.8, 4.0, 5.0, and 8.0 min and clobetasol oxidation degradation peaks eluted at 2.2 and 24 min. Complete validation was performed for linearity, accuracy, and precision over the concentration range 0.15–15 μg mL−1. All data were analyzed statistically and this RP-HPLC method proved to be accurate, precise, linear, and stability indicating for the quantitation of clobetasol 17-propionate in methanol, propylene glycol, and cream formulations.
- Full Text:
- Date Issued: 2013
The impact of formulation variables on the optimization of pilot scale clobetasol 17-propionate creams
- Fauzee, Ayesha F B, Walker, Roderick B
- Authors: Fauzee, Ayesha F B , Walker, Roderick B
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183275 , vital:43937 , xlink:href="https://doi.org/10.1080/23311916.2020.1804713"
- Description: The impact of formulation variables on the optimization of pilot scale clobetasol 17-propionate (CP) cream formulations was investigated using a Central Composite Design of Experiments. Thirty batches of cream were manufactured and the formulation variables assessed were % v/v propylene glycol, % w/w Gelot® 64, cetostearyl alcohol and glyceryl monostearate content. The responses monitored included viscosity, spreadability, pH, CP content, extrudability, electrical conductivity, and % CP released at 72 hours. The responses were compared to those of a reference product, Dermovate® cream. ANOVA analysis revealed that viscosity, spreadability, and % CP released at 72 hours were significant formulation responses (p more than 0.05). Cetostearyl alcohol had the greatest impact on quality of pilot scale products. An increase in cetostearyl alcohol resulted in an increase in viscosity, a decrease in spreadability, and a decrease in % CP released at 72 hours. The optimized pilot scale CP formulation contained 46% v/v propylene glycol, 8.6% w/w cetostearyl alcohol, 10.5% w/w glyceryl monostearate, and 3.8% w/w Gelot® 64. The resultant viscosity, spreadability, pH, CP content, extrudability, electrical conductivity, and % CP released were 44633cP, 24.91cm2, 101.23 %, 76.98 g/cm2, 198.23 µS/cm, and 50.23%. The addition of cetostearyl alcohol and Gelot® 64 is critical for establishing a soft formulation that leads to the formation of a mixed crystal bilayer network of high viscosity. The formation of a separate crystalline lipophilic network usually occurs in semi-solid formulations that contain high concentrations of emulsifier, leading to an increase in shear stress and greater physicochemical stability of the formulation. The use of experimental design approaches to formulation development activities, permit evaluation of multiple factors simultaneously, reducing the time and costs associated with product development activities, whilst identifying a composition design space and ensuring stable and effective dosage forms are produced.
- Full Text:
- Date Issued: 2020
- Authors: Fauzee, Ayesha F B , Walker, Roderick B
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183275 , vital:43937 , xlink:href="https://doi.org/10.1080/23311916.2020.1804713"
- Description: The impact of formulation variables on the optimization of pilot scale clobetasol 17-propionate (CP) cream formulations was investigated using a Central Composite Design of Experiments. Thirty batches of cream were manufactured and the formulation variables assessed were % v/v propylene glycol, % w/w Gelot® 64, cetostearyl alcohol and glyceryl monostearate content. The responses monitored included viscosity, spreadability, pH, CP content, extrudability, electrical conductivity, and % CP released at 72 hours. The responses were compared to those of a reference product, Dermovate® cream. ANOVA analysis revealed that viscosity, spreadability, and % CP released at 72 hours were significant formulation responses (p more than 0.05). Cetostearyl alcohol had the greatest impact on quality of pilot scale products. An increase in cetostearyl alcohol resulted in an increase in viscosity, a decrease in spreadability, and a decrease in % CP released at 72 hours. The optimized pilot scale CP formulation contained 46% v/v propylene glycol, 8.6% w/w cetostearyl alcohol, 10.5% w/w glyceryl monostearate, and 3.8% w/w Gelot® 64. The resultant viscosity, spreadability, pH, CP content, extrudability, electrical conductivity, and % CP released were 44633cP, 24.91cm2, 101.23 %, 76.98 g/cm2, 198.23 µS/cm, and 50.23%. The addition of cetostearyl alcohol and Gelot® 64 is critical for establishing a soft formulation that leads to the formation of a mixed crystal bilayer network of high viscosity. The formation of a separate crystalline lipophilic network usually occurs in semi-solid formulations that contain high concentrations of emulsifier, leading to an increase in shear stress and greater physicochemical stability of the formulation. The use of experimental design approaches to formulation development activities, permit evaluation of multiple factors simultaneously, reducing the time and costs associated with product development activities, whilst identifying a composition design space and ensuring stable and effective dosage forms are produced.
- Full Text:
- Date Issued: 2020
The impact of manufacturing variables on in vitro release of clobetasol 17-propionate from pilot scale cream formulations
- Fauzee, Ayesha F B, Khamanga, Sandile M, Walker, Roderick B
- Authors: Fauzee, Ayesha F B , Khamanga, Sandile M , Walker, Roderick B
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183872 , vital:44077 , xlink:href="https://doi.org/10.3109/03639045.2013.842579"
- Description: The purpose of the study was to evaluate the effect of different homogenization speeds and times, anchor speeds and cooling times on the viscosity and cumulative % clobetasol 17-propionate released per unit area at 72 h from pilot scale cream formulations. A 24 full factorial central composite design for four independent variables were investigated. Thirty pilot scale batches of cream formulations were manufactured using a Wintech® cream/ointment plant. The viscosity and in vitro release of CP were monitored and compared to an innovator product that is commercially available on the South African market, namely, Dermovate® cream. Contour and three-dimensional response surface plots were produced and the viscosity and cumulative % CP released per unit area at 72 h were found to be primarily dependent on the homogenization and anchor speeds. An increase in the homogenization and anchor speeds appeared to exhibit a synergistic effect on the resultant viscosity of the cream whereas an antagonistic effect was observed for the in vitro release of CP from the experimental cream formulations. The in vitro release profiles were best fitted to a Higuchi model and diffusion proved to be the dominant mechanism of drug release that was confirmed by use of the Korsmeyer–Peppas model. The research was further validated and confirmed by the high prognostic ability of response surface methodology (RSM) with a resultant mean percentage error of (±SD) 0.17 ± 0.093 suggesting that RSM may be an efficient tool for the development and optimization of topical formulations.
- Full Text:
- Date Issued: 2014
- Authors: Fauzee, Ayesha F B , Khamanga, Sandile M , Walker, Roderick B
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183872 , vital:44077 , xlink:href="https://doi.org/10.3109/03639045.2013.842579"
- Description: The purpose of the study was to evaluate the effect of different homogenization speeds and times, anchor speeds and cooling times on the viscosity and cumulative % clobetasol 17-propionate released per unit area at 72 h from pilot scale cream formulations. A 24 full factorial central composite design for four independent variables were investigated. Thirty pilot scale batches of cream formulations were manufactured using a Wintech® cream/ointment plant. The viscosity and in vitro release of CP were monitored and compared to an innovator product that is commercially available on the South African market, namely, Dermovate® cream. Contour and three-dimensional response surface plots were produced and the viscosity and cumulative % CP released per unit area at 72 h were found to be primarily dependent on the homogenization and anchor speeds. An increase in the homogenization and anchor speeds appeared to exhibit a synergistic effect on the resultant viscosity of the cream whereas an antagonistic effect was observed for the in vitro release of CP from the experimental cream formulations. The in vitro release profiles were best fitted to a Higuchi model and diffusion proved to be the dominant mechanism of drug release that was confirmed by use of the Korsmeyer–Peppas model. The research was further validated and confirmed by the high prognostic ability of response surface methodology (RSM) with a resultant mean percentage error of (±SD) 0.17 ± 0.093 suggesting that RSM may be an efficient tool for the development and optimization of topical formulations.
- Full Text:
- Date Issued: 2014