A framework for enhancing trust for improved participation in electronic marketplaces accessed from mobile platforms
- Isabirye, Naomi Nabirye, Von Solms, R
- Authors: Isabirye, Naomi Nabirye , Von Solms, R
- Date: 2016
- Subjects: Information technology -- Economic aspects -- South Africa Agricultural innovations -- South Africa Agricultural systems -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/20019 , vital:29053
- Description: Information and communication technologies (ICTs) have been widely researched as a mechanism for improving the socio-economic status of disadvantaged, rural communities. In order to do this numerous technology-based initiatives have been introduced into disadvantaged, rural communities to assist them in various aspects of their lives. Unfortunately, even when the proposed benefit of a particular technology is clearly evident to its initiators, the adoption by the target users is often uncertain. This has also been the case with e-commerce in agriculture. Despite the numerous benefits of e-commerce for agricultural producers, the uptake has been low. Trust is a critical pre-condition for the adoption of e-marketplaces. E-marketplaces expose consumers to the risk of non-delivery or misrepresentation of goods ordered and the misuse of personal information by external parties. Additionally, the time investment needed to make a shift to e-marketplaces and the opinions of important reference groups affects the user’s willingness to trust and depend on an e-marketplace. This study was undertaken to assess the extent to which rural users with limited ICT experience would trust and, consequently, adopt an e-marketplace to support agricultural trade. A pragmatic philosophy was adopted in this study, indicating that the researcher’s view of reality is founded on the practical implications and outcomes that are observed. This study used a Canonical Action Research strategy to design, develop and deploy a voice based e-marketplace to assist the trading activities of a Western Cape based aloe community. The community was allowed to utilise thee-marketplace over a period of eight weeks. Thereafter, interviews were held with the participants to investigate their perceptions of the technology. As a result, a model proposing the factors that must be in place for trust to be achieved in a voice based e-marketplace was proposed. The study found that the trustworthiness of a technology results from the technology’s technical capability to satisfy the needs of its users reliably. Usability and security were found to be important determinants of the trustworthiness of a technology. Furthermore, the requirements elicitation process was found to be central to achieving trust as it defines the necessary criteria for developing secure, usable, functional, and reliable technologies that meet the needs of their users.
- Full Text:
- Date Issued: 2016
- Authors: Isabirye, Naomi Nabirye , Von Solms, R
- Date: 2016
- Subjects: Information technology -- Economic aspects -- South Africa Agricultural innovations -- South Africa Agricultural systems -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/20019 , vital:29053
- Description: Information and communication technologies (ICTs) have been widely researched as a mechanism for improving the socio-economic status of disadvantaged, rural communities. In order to do this numerous technology-based initiatives have been introduced into disadvantaged, rural communities to assist them in various aspects of their lives. Unfortunately, even when the proposed benefit of a particular technology is clearly evident to its initiators, the adoption by the target users is often uncertain. This has also been the case with e-commerce in agriculture. Despite the numerous benefits of e-commerce for agricultural producers, the uptake has been low. Trust is a critical pre-condition for the adoption of e-marketplaces. E-marketplaces expose consumers to the risk of non-delivery or misrepresentation of goods ordered and the misuse of personal information by external parties. Additionally, the time investment needed to make a shift to e-marketplaces and the opinions of important reference groups affects the user’s willingness to trust and depend on an e-marketplace. This study was undertaken to assess the extent to which rural users with limited ICT experience would trust and, consequently, adopt an e-marketplace to support agricultural trade. A pragmatic philosophy was adopted in this study, indicating that the researcher’s view of reality is founded on the practical implications and outcomes that are observed. This study used a Canonical Action Research strategy to design, develop and deploy a voice based e-marketplace to assist the trading activities of a Western Cape based aloe community. The community was allowed to utilise thee-marketplace over a period of eight weeks. Thereafter, interviews were held with the participants to investigate their perceptions of the technology. As a result, a model proposing the factors that must be in place for trust to be achieved in a voice based e-marketplace was proposed. The study found that the trustworthiness of a technology results from the technology’s technical capability to satisfy the needs of its users reliably. Usability and security were found to be important determinants of the trustworthiness of a technology. Furthermore, the requirements elicitation process was found to be central to achieving trust as it defines the necessary criteria for developing secure, usable, functional, and reliable technologies that meet the needs of their users.
- Full Text:
- Date Issued: 2016
A framework for improving construction workers’ health and safety practices in Lagos, Nigeria
- Authors: Kukoyi, Patricia Omega
- Date: 2018
- Subjects: Construction industry -- Health aspects -- Lagos -- Nigeria , Industrial safety -- Lagos -- Nigeria Sustainable construction -- Lagos -- Nigeria
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/30962 , vital:31235
- Description: The construction sector is known for its poor health and safety (H&S) record. This situation contributes to the poor performance of construction projects and poor worker productivity. In view of this, the research was undertaken to improve workers’ H&S practices. This study determined how the systems thinking approach will mitigate unhealthy and unsafe construction practices in Lagos, Nigeria by developing interventions, and proposing a model for improved H&S practices. The study utilised a mixed research method approach. Both quantitative and qualitative methods were used specifically the concurrent embedded method to obtain and analyse the data. The sample size for the quantitative study was 375 respondents and a total of 40 respondents were engaged in the qualitative study. The sample consisted of designers, contractors, clients, quantity surveyors, project managers, construction managers, supervisors, and construction workers (masons, carpenters, painters, roofers, electricians) based in Lagos, Nigeria. The findings reveal that there is inadequate consideration for H&S during the procurement of construction projects. Furthermore, the absence of H&S regulations relating to the construction sector was observed. Unsafe practices at construction sites in Nigeria can be attributed to this discovery. The study reveals that the regulatory system, the organisation, the individual and the work environment all have an impact on H&S work practices. Although the contractors are mainly responsible for H&S at construction sites, other construction stakeholders (such as clients, consultants, etc.) influence H&S practices. The findings highlight the need for the adoption of a holistic approach to facilitate improvement in H&S practices on construction sites. The research has contributed to the body of knowledge by developing a framework for improving workers’ H&S performance on construction sites.
- Full Text:
- Date Issued: 2018
- Authors: Kukoyi, Patricia Omega
- Date: 2018
- Subjects: Construction industry -- Health aspects -- Lagos -- Nigeria , Industrial safety -- Lagos -- Nigeria Sustainable construction -- Lagos -- Nigeria
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/30962 , vital:31235
- Description: The construction sector is known for its poor health and safety (H&S) record. This situation contributes to the poor performance of construction projects and poor worker productivity. In view of this, the research was undertaken to improve workers’ H&S practices. This study determined how the systems thinking approach will mitigate unhealthy and unsafe construction practices in Lagos, Nigeria by developing interventions, and proposing a model for improved H&S practices. The study utilised a mixed research method approach. Both quantitative and qualitative methods were used specifically the concurrent embedded method to obtain and analyse the data. The sample size for the quantitative study was 375 respondents and a total of 40 respondents were engaged in the qualitative study. The sample consisted of designers, contractors, clients, quantity surveyors, project managers, construction managers, supervisors, and construction workers (masons, carpenters, painters, roofers, electricians) based in Lagos, Nigeria. The findings reveal that there is inadequate consideration for H&S during the procurement of construction projects. Furthermore, the absence of H&S regulations relating to the construction sector was observed. Unsafe practices at construction sites in Nigeria can be attributed to this discovery. The study reveals that the regulatory system, the organisation, the individual and the work environment all have an impact on H&S work practices. Although the contractors are mainly responsible for H&S at construction sites, other construction stakeholders (such as clients, consultants, etc.) influence H&S practices. The findings highlight the need for the adoption of a holistic approach to facilitate improvement in H&S practices on construction sites. The research has contributed to the body of knowledge by developing a framework for improving workers’ H&S performance on construction sites.
- Full Text:
- Date Issued: 2018
A framework for m-voting implementation in South Africa
- Authors: Mpekoa, Noluntu
- Date: 2017
- Subjects: Electronic voting -- South Africa Voting -- Technological innovations , Voting-machines -- South Africa -- Reliability Elections -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/19662 , vital:28927
- Description: Voting enables certain formal decisions to be made through the participation of a given population; and it is the vital part of a democratic process. The method of voting used in South Africa (SA) today is derived from the Australian ballot system. This paper-based voting system, however, is slow, convoluted and inaccurate because of human errors; it is costly and largely inefficient. In the early 1900s, election officials overwhelmingly decided to use electronic voting (E-voting) systems to solve some of the problematic issues of paper-based voting systems. Mobile voting (M-voting) is a subset of E-voting; and it allows citizens to use their mobile phones to cast their votes. Very few countries have endeavoured to implement M-voting, in order to improve mobility and simplify the election procedures. Despite several M-voting initiatives reported worldwide; insufficient attention has been devoted to understanding the factors that influence the success or failure of M-voting implementation. It is also important to note that the implementation of M-voting may be very difficult; if the different modalities that aid successful M-voting implementation are not in place. This study seeks to develop a framework that has the potential to enable the successful implementation of M-voting in SA. The proposed framework is an IT artefact that endeavors to improve human experiences for voting. This study followed a Design-Science approach; and it made use of a case study to collect the data via a literature review, observations, questionnaires, focus groups and expert reviews. The study revealed that there is no institutional, legal and regulatory framework for the proliferation of M-voting in SA. Successful M-voting implementation depends on a compendium of factors, which may be unique in the local context where it is implemented. The framework that resulted from the above was assessed for validity and applicability; after which a modified framework was presented. The research concludes with specific implementation guidelines, as well as areas for future research.
- Full Text:
- Date Issued: 2017
- Authors: Mpekoa, Noluntu
- Date: 2017
- Subjects: Electronic voting -- South Africa Voting -- Technological innovations , Voting-machines -- South Africa -- Reliability Elections -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/19662 , vital:28927
- Description: Voting enables certain formal decisions to be made through the participation of a given population; and it is the vital part of a democratic process. The method of voting used in South Africa (SA) today is derived from the Australian ballot system. This paper-based voting system, however, is slow, convoluted and inaccurate because of human errors; it is costly and largely inefficient. In the early 1900s, election officials overwhelmingly decided to use electronic voting (E-voting) systems to solve some of the problematic issues of paper-based voting systems. Mobile voting (M-voting) is a subset of E-voting; and it allows citizens to use their mobile phones to cast their votes. Very few countries have endeavoured to implement M-voting, in order to improve mobility and simplify the election procedures. Despite several M-voting initiatives reported worldwide; insufficient attention has been devoted to understanding the factors that influence the success or failure of M-voting implementation. It is also important to note that the implementation of M-voting may be very difficult; if the different modalities that aid successful M-voting implementation are not in place. This study seeks to develop a framework that has the potential to enable the successful implementation of M-voting in SA. The proposed framework is an IT artefact that endeavors to improve human experiences for voting. This study followed a Design-Science approach; and it made use of a case study to collect the data via a literature review, observations, questionnaires, focus groups and expert reviews. The study revealed that there is no institutional, legal and regulatory framework for the proliferation of M-voting in SA. Successful M-voting implementation depends on a compendium of factors, which may be unique in the local context where it is implemented. The framework that resulted from the above was assessed for validity and applicability; after which a modified framework was presented. The research concludes with specific implementation guidelines, as well as areas for future research.
- Full Text:
- Date Issued: 2017
A framework for the secure consumerisation of mobile, handheld devices in the healthcare institutional context
- Authors: Kativu, Tatenda Kevin
- Date: 2017
- Subjects: Mobile computing -- Hospitals -- South Africa Electronic data processing -- Security measures -- South Africa , Wireless communication systems -- Social aspects Medical care -- Technological innovations -- Developing countries
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/18630 , vital:28696
- Description: The advances in communication technologies have resulted in a significant shift in the workplace culture. Mobile computing devices are increasingly becoming an integral part of workplace culture. Mobility has several advantages to the organisation, one such example is the “always online” workforce resulting in increased productivity hours. As a result, organisations are increasingly providing mobile computing devices to the workforce to enable remote productivity at the organisations cost. A challenge associated with mobility is that these devices are likely to connect to a variety of networks, some which may insecure, and because of their smaller form factor and perceived value, are vulnerable to loss and theft amongst other information security challenges. Increased mobility has far reaching benefits for remote and rural communities, particularly in the healthcare domain where health workers are able to provide services to previously inaccessible populations. The adverse economic and infrastructure environment means institution provided devices make up the bulk of the mobile computing devices, and taking away the ownership, the usage patterns and the susceptibility of information to adversity are similar. It is for this reason that this study focuses on information security on institution provided devices in a rural healthcare setting. This study falls into the design science paradigm and is guided by the principles of design science proposed by Hevner et al. The research process incorporates literature reviews focusing on health information systems security and identifying theoretical constructs that support the low-resource based secure deployment of health information technologies. Thereafter, the artifact is developed and evaluated through an implementation case study and expert reviews. The outcomes from the feedback are integrated into the framework.
- Full Text:
- Date Issued: 2017
- Authors: Kativu, Tatenda Kevin
- Date: 2017
- Subjects: Mobile computing -- Hospitals -- South Africa Electronic data processing -- Security measures -- South Africa , Wireless communication systems -- Social aspects Medical care -- Technological innovations -- Developing countries
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/18630 , vital:28696
- Description: The advances in communication technologies have resulted in a significant shift in the workplace culture. Mobile computing devices are increasingly becoming an integral part of workplace culture. Mobility has several advantages to the organisation, one such example is the “always online” workforce resulting in increased productivity hours. As a result, organisations are increasingly providing mobile computing devices to the workforce to enable remote productivity at the organisations cost. A challenge associated with mobility is that these devices are likely to connect to a variety of networks, some which may insecure, and because of their smaller form factor and perceived value, are vulnerable to loss and theft amongst other information security challenges. Increased mobility has far reaching benefits for remote and rural communities, particularly in the healthcare domain where health workers are able to provide services to previously inaccessible populations. The adverse economic and infrastructure environment means institution provided devices make up the bulk of the mobile computing devices, and taking away the ownership, the usage patterns and the susceptibility of information to adversity are similar. It is for this reason that this study focuses on information security on institution provided devices in a rural healthcare setting. This study falls into the design science paradigm and is guided by the principles of design science proposed by Hevner et al. The research process incorporates literature reviews focusing on health information systems security and identifying theoretical constructs that support the low-resource based secure deployment of health information technologies. Thereafter, the artifact is developed and evaluated through an implementation case study and expert reviews. The outcomes from the feedback are integrated into the framework.
- Full Text:
- Date Issued: 2017
A maturity grid-based method for assessing communication in business-IT alignment
- Authors: Coertze, Jacques Jacobus
- Date: 2016
- Subjects: Business communication , Management information systems
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/6740 , vital:21139
- Description: This thesis reports on the research undertaken to develop a method for organisations to assess human communication between their business and IT personnel as part of business–IT alignment. The research described in this thesis involves (i) a literature review in business–IT alignment and related fields, such as management studies and communication science; (ii) a Delphi study conducted among industry members, practitioners, and academics operating in the IT advisory, auditing and communication disciplines; and (iii) a case study of a public sector organisation in South Africa. By adopting a system-theoretic perspective on communication, this thesis proposes that communication in business–IT alignment can be seen as coordinating behaviour and a series of learning and reflection events, consequently culminating in increased mutual understanding. Various conceptualisations of communication are explored and, together with several industry elicited factors that influence communication in business–IT alignment, are incorporated into a conceptual model informing the assessment method. This research developed, applied, and tested a method whereby organisations can assess the quality of the human communication between their business and IT personnel as part of the business–IT alignment endeavour. The aim of this method is to trigger reflection on communication by considering communication philosophy and practices in business–IT alignment. The method, termed the ‘Business-IT Communication Alignment Maturity Improvement Communication Alignment Maturity Improvement (CAMI) method’, is based on a maturity grid-based approach, which stems originally from process improvement in software development and quality management. This thesis is most closely aligned with the research performed by Maier, Eckert, and Clarkson (2004, 2006), who successfully applied the maturity grid-based approach to investigate, audit and assess communication within the engineering design process. The question addressed in this thesis is whether this approach can be successfully extrapolated to the business–IT alignment context and whether it would yield similar benefits. Furthermore, the issue of whether it would offer a practical method for use in organisations is also addressed. Having applied the CAMI method at a public sector organisation, this thesis proposes that the maturity grid-based approach can indeed be extrapolated to iv the business–IT alignment context, consequently offering a viable and practical method for assessing communication in organisations. In particular, the CAMI method allows organisations to capture both their current and their desired communication situations and to expose discrepancies between the perceptions held by their business and IT personnel. These results form a basis for action planning, strategizing, and, ultimately, interventions for improvement. In conclusion, the thesis discusses further application and extension possibilities for the assessment method.
- Full Text:
- Date Issued: 2016
- Authors: Coertze, Jacques Jacobus
- Date: 2016
- Subjects: Business communication , Management information systems
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/6740 , vital:21139
- Description: This thesis reports on the research undertaken to develop a method for organisations to assess human communication between their business and IT personnel as part of business–IT alignment. The research described in this thesis involves (i) a literature review in business–IT alignment and related fields, such as management studies and communication science; (ii) a Delphi study conducted among industry members, practitioners, and academics operating in the IT advisory, auditing and communication disciplines; and (iii) a case study of a public sector organisation in South Africa. By adopting a system-theoretic perspective on communication, this thesis proposes that communication in business–IT alignment can be seen as coordinating behaviour and a series of learning and reflection events, consequently culminating in increased mutual understanding. Various conceptualisations of communication are explored and, together with several industry elicited factors that influence communication in business–IT alignment, are incorporated into a conceptual model informing the assessment method. This research developed, applied, and tested a method whereby organisations can assess the quality of the human communication between their business and IT personnel as part of the business–IT alignment endeavour. The aim of this method is to trigger reflection on communication by considering communication philosophy and practices in business–IT alignment. The method, termed the ‘Business-IT Communication Alignment Maturity Improvement Communication Alignment Maturity Improvement (CAMI) method’, is based on a maturity grid-based approach, which stems originally from process improvement in software development and quality management. This thesis is most closely aligned with the research performed by Maier, Eckert, and Clarkson (2004, 2006), who successfully applied the maturity grid-based approach to investigate, audit and assess communication within the engineering design process. The question addressed in this thesis is whether this approach can be successfully extrapolated to the business–IT alignment context and whether it would yield similar benefits. Furthermore, the issue of whether it would offer a practical method for use in organisations is also addressed. Having applied the CAMI method at a public sector organisation, this thesis proposes that the maturity grid-based approach can indeed be extrapolated to iv the business–IT alignment context, consequently offering a viable and practical method for assessing communication in organisations. In particular, the CAMI method allows organisations to capture both their current and their desired communication situations and to expose discrepancies between the perceptions held by their business and IT personnel. These results form a basis for action planning, strategizing, and, ultimately, interventions for improvement. In conclusion, the thesis discusses further application and extension possibilities for the assessment method.
- Full Text:
- Date Issued: 2016
A model for enhancing trust in South African automotive supply chains through information technology
- Authors: Piderit, Roxanne
- Date: 2012
- Subjects: Automobile supplies industry -- South Africa , Automobiles -- Technological innovations , Business logistics -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9793 , http://hdl.handle.net/10948/d1011851 , Automobile supplies industry -- South Africa , Automobiles -- Technological innovations , Business logistics -- South Africa
- Description: The South African automotive industry is recognised as an important sector for the economy and has thus been prioritised by the South African government. The success of the automotive manufacturers depends on the efficiency and effectiveness of their supply chain. Due to the large number of suppliers involved in these supply chains, enhancing trust in the inter-organisational relationships can ensure the competitiveness of the supply chain. Additionally, insufficient trust can disrupt information sharing between supply chain partners which further impacts on supply chain operations and hence supply chain competitiveness. Thus, both insufficient trust and insufficient information sharing are viewed as contributing factors to the inefficiency and ineffectiveness of a supply chain’s operations. The use of Information Technology to facilitate inter-organisational relationships, in particular in terms of improving information sharing, is an important consideration in this research project. As in the Prisoner’s Dilemma, when supply chain members share information freely, trust levels are increased, hence supply chain effectiveness and efficiency is achieved and therefore the competitiveness of the supply chain is optimised. This study addresses the problem of enhancing trust in automotive supply chains using Information Technology. Previous studies have recognised the importance of trust and information sharing in supply chain relationships. These previous studies have also considered the effect of trust on information sharing, or the effect of information sharing on trust in a single direction. Thus, to address this research problem, a cyclical relationship between trust and information sharing is proposed. In this respect, Information Technology should be used to nurture this cyclical relationship between trust and information sharing. A model for the enhancement of trust in automotive supply chains through Information Technology is proposed to achieve the objectives of this research project. This model includes risk perception; information sharing as a means of enhancing trust; a trust area that consists of both supply chain partner trustworthiness and system trust; the resultant trusting behaviour; and the resultant improved information sharing. As this study is concerned with the use of IT to enhance trust, the inclusion of system trust as a component of the model is a significant contribution of this study which is complementary to the proposed cyclical relationship between trust and information sharing.
- Full Text:
- Date Issued: 2012
A model for enhancing trust in South African automotive supply chains through information technology
- Authors: Piderit, Roxanne
- Date: 2012
- Subjects: Automobile supplies industry -- South Africa , Automobiles -- Technological innovations , Business logistics -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9793 , http://hdl.handle.net/10948/d1011851 , Automobile supplies industry -- South Africa , Automobiles -- Technological innovations , Business logistics -- South Africa
- Description: The South African automotive industry is recognised as an important sector for the economy and has thus been prioritised by the South African government. The success of the automotive manufacturers depends on the efficiency and effectiveness of their supply chain. Due to the large number of suppliers involved in these supply chains, enhancing trust in the inter-organisational relationships can ensure the competitiveness of the supply chain. Additionally, insufficient trust can disrupt information sharing between supply chain partners which further impacts on supply chain operations and hence supply chain competitiveness. Thus, both insufficient trust and insufficient information sharing are viewed as contributing factors to the inefficiency and ineffectiveness of a supply chain’s operations. The use of Information Technology to facilitate inter-organisational relationships, in particular in terms of improving information sharing, is an important consideration in this research project. As in the Prisoner’s Dilemma, when supply chain members share information freely, trust levels are increased, hence supply chain effectiveness and efficiency is achieved and therefore the competitiveness of the supply chain is optimised. This study addresses the problem of enhancing trust in automotive supply chains using Information Technology. Previous studies have recognised the importance of trust and information sharing in supply chain relationships. These previous studies have also considered the effect of trust on information sharing, or the effect of information sharing on trust in a single direction. Thus, to address this research problem, a cyclical relationship between trust and information sharing is proposed. In this respect, Information Technology should be used to nurture this cyclical relationship between trust and information sharing. A model for the enhancement of trust in automotive supply chains through Information Technology is proposed to achieve the objectives of this research project. This model includes risk perception; information sharing as a means of enhancing trust; a trust area that consists of both supply chain partner trustworthiness and system trust; the resultant trusting behaviour; and the resultant improved information sharing. As this study is concerned with the use of IT to enhance trust, the inclusion of system trust as a component of the model is a significant contribution of this study which is complementary to the proposed cyclical relationship between trust and information sharing.
- Full Text:
- Date Issued: 2012
A multi-stakeholder approach to productivity improvement in the South African construction industry
- Authors: Adebowale, Oluseyi Julius
- Date: 2018
- Subjects: Labor productivity , Construction industry -- Labor productivity Construction industry -- South Africa Construction industry -- Management
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/19597 , vital:28902
- Description: As poor productivity in construction continues to constitute a setback to projects’ success in different countries of the world, the situation in South African construction is no exception. Poor productivity on construction projects and its detrimental impact on project objectives have continually resonated for decades. As a result, several strategies, interventions, and measures that aimed at improving productivity in the construction sector have been proposed. Nevertheless, the phenomenon importunately creates a major challenge on construction projects, and by extension, the construction industry especially in developing countries. Even when construction management literature acknowledged the commonalities in productivity influences, the practice of addressing construction productivity influences as separate entities has gained much relevance over the years. Taking into perspective, the multidisciplinary and complexity inherent in construction, a systemic approach to addressing construction productivity influences is fast becoming essential. This study addressed productivity-influencing factors by considering factors that are related to rework, shortage of construction resources, constructability, political, socio-economic, working environment, welfare conditions, disputes, planning and training. Consequently, the interdependencies of the most significant productivity-influencing factors in South African construction was developed in the form of a qualitative model. The study adopts the underlying assumptions of the quantitative approach, but also accepts some qualitative data. With regards to the subject of enquiry, the paradigm of the research is positivism which consists of realists’ ontological prescriptions and objectivists’ epistemological prescriptions. Site engineers, site managers, and site supervisors working for cidb registered contractors in four South African provinces constitute the sample stratum. Statistical Package for the Social Sciences (SPSS) version 24 was used to analyse the data gathered from these project participants; both descriptive and inferential statistics were used. Descriptive statistics was used to summarise and describe the data obtained, while inferential statistics in the form of analysis of variance, T-test, and Tukey post hoc test were adopted. The study reported the most significant factors which negatively influence productivity on South African construction projects as inadequate workers’ skills, defective workmanship, the practice of awarding contracts to lowest bidders, political activities resulting in industrial action, inadequate contractors’ experience in project planning, payment delays by contractors, and corruption. Furthermore, it was found that contractors largely share similar perceptions regarding the factors that constrain productivity growth in South African construction. The approximate level of labour, material, and plant productivity on South African construction projects is 50.4%, 72.9%, and 62.0% respectively, while the approximate multifactor productivity was estimated as 61.8%. The study concluded that productivity has a considerable relationship with time and cost and a less potent relationship with quality. Based on the research findings, contractors’, consultants’, clients’ and government qualitative intervention models were proposed while recommendations towards improving South African construction productivity were made. The study recommended the reinvention of the apprentice training system to develop skills in construction, the involvement of stakeholders in improving workers’ skills, improved collaboration between the construction industry and higher institutions of learning regarding curricula development, adequate supervision of construction activities to mitigate the propagation of rework on construction projects, character in leadership, and integrity of project stakeholders.
- Full Text:
- Date Issued: 2018
- Authors: Adebowale, Oluseyi Julius
- Date: 2018
- Subjects: Labor productivity , Construction industry -- Labor productivity Construction industry -- South Africa Construction industry -- Management
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/19597 , vital:28902
- Description: As poor productivity in construction continues to constitute a setback to projects’ success in different countries of the world, the situation in South African construction is no exception. Poor productivity on construction projects and its detrimental impact on project objectives have continually resonated for decades. As a result, several strategies, interventions, and measures that aimed at improving productivity in the construction sector have been proposed. Nevertheless, the phenomenon importunately creates a major challenge on construction projects, and by extension, the construction industry especially in developing countries. Even when construction management literature acknowledged the commonalities in productivity influences, the practice of addressing construction productivity influences as separate entities has gained much relevance over the years. Taking into perspective, the multidisciplinary and complexity inherent in construction, a systemic approach to addressing construction productivity influences is fast becoming essential. This study addressed productivity-influencing factors by considering factors that are related to rework, shortage of construction resources, constructability, political, socio-economic, working environment, welfare conditions, disputes, planning and training. Consequently, the interdependencies of the most significant productivity-influencing factors in South African construction was developed in the form of a qualitative model. The study adopts the underlying assumptions of the quantitative approach, but also accepts some qualitative data. With regards to the subject of enquiry, the paradigm of the research is positivism which consists of realists’ ontological prescriptions and objectivists’ epistemological prescriptions. Site engineers, site managers, and site supervisors working for cidb registered contractors in four South African provinces constitute the sample stratum. Statistical Package for the Social Sciences (SPSS) version 24 was used to analyse the data gathered from these project participants; both descriptive and inferential statistics were used. Descriptive statistics was used to summarise and describe the data obtained, while inferential statistics in the form of analysis of variance, T-test, and Tukey post hoc test were adopted. The study reported the most significant factors which negatively influence productivity on South African construction projects as inadequate workers’ skills, defective workmanship, the practice of awarding contracts to lowest bidders, political activities resulting in industrial action, inadequate contractors’ experience in project planning, payment delays by contractors, and corruption. Furthermore, it was found that contractors largely share similar perceptions regarding the factors that constrain productivity growth in South African construction. The approximate level of labour, material, and plant productivity on South African construction projects is 50.4%, 72.9%, and 62.0% respectively, while the approximate multifactor productivity was estimated as 61.8%. The study concluded that productivity has a considerable relationship with time and cost and a less potent relationship with quality. Based on the research findings, contractors’, consultants’, clients’ and government qualitative intervention models were proposed while recommendations towards improving South African construction productivity were made. The study recommended the reinvention of the apprentice training system to develop skills in construction, the involvement of stakeholders in improving workers’ skills, improved collaboration between the construction industry and higher institutions of learning regarding curricula development, adequate supervision of construction activities to mitigate the propagation of rework on construction projects, character in leadership, and integrity of project stakeholders.
- Full Text:
- Date Issued: 2018
A virtual-community-centric model for coordination in the South African public sector
- Thomas, Godwin Dogara Ayenajeh
- Authors: Thomas, Godwin Dogara Ayenajeh
- Date: 2014
- Subjects: Electronic data processing -- Distributed processing , Interprofessional relations , Virtual work teams
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9831 , http://hdl.handle.net/10948/d1021073
- Description: Organizations face challenges constantly owing to limited resources. As such, to take advantage of new opportunities and to mitigate possible risks they look for new ways to collaborate, by sharing knowledge and competencies. Coordination among partners is critical in order to achieve success. The segmented South African public sector is no different. Driven by the desire to ensure proper service delivery in this sector, various government bodies and service providers play different roles towards the attainment of common goals. This is easier said than done, given the complexity of the distributed nature of the environment. Heterogeneity, autonomy, and the increasing need to collaborate provoke the need to develop an integrative and dynamic coordination support service system in the SA public sector. Thus, the research looks to theories/concepts and existing coordination practices to ground the process of development. To inform the design of the proposed artefact the research employs an interdisciplinary approach championed by coordination theory to review coordination-related theories and concepts. The effort accounts for coordination constructs that characterize and transform the problem and solution spaces. Thus, requirements are explicit towards identifying coordination breakdowns and their resolution. Furthermore, how coordination in a distributed environment is supported in practice is considered from a socio-technical perspective in an effort to account holistically for coordination support. Examining existing solutions identified shortcomings that, if addressed, can help to improve the solutions for coordination, which are often rigidly and narrowly defined. The research argues that introducing a mediating technological artefact conceived from a virtual community and service lenses can serve as a solution to the problem. By adopting a design-science research paradigm, the research develops a model as a primary artefact to support coordination from a collaboration standpoint. The suggestions from theory and practice and the unique case requirement identified through a novel case analysis framework form the basis of the model design. The proposed model support operation calls for an architecture which employs a design pattern that divides a complex whole into smaller, simpler parts, with the aim of reducing the system complexity. Four fundamental functions of the supporting architecture are introduced and discussed as they would support the operation and activities of the proposed collaboration lifecycle model geared towards streamlining coordination in a distributed environment. As part of the model development knowledge contributions are made in several ways. Firstly, an analytical instrument is presented that can be used by an enterprise architect or business analyst to study the coordination status quo of a collaborative activity in a distributed environment. Secondly, a lifecycle model is presented as meta-process model with activities that are geared towards streamlining the coordination of dynamic collaborative activities or projects. Thirdly, an architecture that will enable the technical virtual community-centric, context-aware environment that hosts the process-based operations is offered. Finally, the validation tool that represents the applied contribution to the research that promises possible adaptation for similar circumstances is presented. The artefacts contribute towards a design theory in IS research for the development and improvement of coordination support services in a distributed environment such as the South African public sector.
- Full Text:
- Date Issued: 2014
- Authors: Thomas, Godwin Dogara Ayenajeh
- Date: 2014
- Subjects: Electronic data processing -- Distributed processing , Interprofessional relations , Virtual work teams
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9831 , http://hdl.handle.net/10948/d1021073
- Description: Organizations face challenges constantly owing to limited resources. As such, to take advantage of new opportunities and to mitigate possible risks they look for new ways to collaborate, by sharing knowledge and competencies. Coordination among partners is critical in order to achieve success. The segmented South African public sector is no different. Driven by the desire to ensure proper service delivery in this sector, various government bodies and service providers play different roles towards the attainment of common goals. This is easier said than done, given the complexity of the distributed nature of the environment. Heterogeneity, autonomy, and the increasing need to collaborate provoke the need to develop an integrative and dynamic coordination support service system in the SA public sector. Thus, the research looks to theories/concepts and existing coordination practices to ground the process of development. To inform the design of the proposed artefact the research employs an interdisciplinary approach championed by coordination theory to review coordination-related theories and concepts. The effort accounts for coordination constructs that characterize and transform the problem and solution spaces. Thus, requirements are explicit towards identifying coordination breakdowns and their resolution. Furthermore, how coordination in a distributed environment is supported in practice is considered from a socio-technical perspective in an effort to account holistically for coordination support. Examining existing solutions identified shortcomings that, if addressed, can help to improve the solutions for coordination, which are often rigidly and narrowly defined. The research argues that introducing a mediating technological artefact conceived from a virtual community and service lenses can serve as a solution to the problem. By adopting a design-science research paradigm, the research develops a model as a primary artefact to support coordination from a collaboration standpoint. The suggestions from theory and practice and the unique case requirement identified through a novel case analysis framework form the basis of the model design. The proposed model support operation calls for an architecture which employs a design pattern that divides a complex whole into smaller, simpler parts, with the aim of reducing the system complexity. Four fundamental functions of the supporting architecture are introduced and discussed as they would support the operation and activities of the proposed collaboration lifecycle model geared towards streamlining coordination in a distributed environment. As part of the model development knowledge contributions are made in several ways. Firstly, an analytical instrument is presented that can be used by an enterprise architect or business analyst to study the coordination status quo of a collaborative activity in a distributed environment. Secondly, a lifecycle model is presented as meta-process model with activities that are geared towards streamlining the coordination of dynamic collaborative activities or projects. Thirdly, an architecture that will enable the technical virtual community-centric, context-aware environment that hosts the process-based operations is offered. Finally, the validation tool that represents the applied contribution to the research that promises possible adaptation for similar circumstances is presented. The artefacts contribute towards a design theory in IS research for the development and improvement of coordination support services in a distributed environment such as the South African public sector.
- Full Text:
- Date Issued: 2014
An ICT strategy for sustainable tourism in Zimbabwe
- Authors: Tsokota, Theo
- Date: 2017
- Subjects: Information technology -- Zimbabwe , Technological innovations -- Zimbabwe Tourism -- Zimbabwe -- Computer network resources Tourism -- Zimbabwe -- Data processing Tourism -- Environmental aspects -- Zimbabwe Sustainable tourism -- Zimbabwe
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/21340 , vital:29479
- Description: This research sought to develop an ICT strategy for sustainable tourism in Zimbabwe. The Government of Zimbabwe has identified ICT and tourism both as strategic industries and pillars for economic revival. The tourism sector was identified as an essential source of foreign exchange earnings and as a means to drive the economy to greater heights and reduce poverty through direct employment in down-stream and up-stream industries. Despite being endowed with rich natural resources that include five World Natural Heritage sites, exquisite flora and fauna. Zimbabwe is not performing well in the world tourism sector. The Southern African country continues to be ranked low on World Economic Forum Travel and Tourism Competitiveness Index. Despite the country‘s strengths, in terms of endowments, the low Tourism and Travel Competitiveness Index suggests weaknesses in related areas. There is currently no clear strategy for the sustainable use of ICT in the tourism sector in Zimbabwe. Despite huge investments and advances in ICT, services in the tourism sector in Zimbabwe continue to be delivered manually and in traditional ways. Therefore, this research sought to propose a strategy for the sustainable use of ICT in the tourism sector in Zimbabwe. However, this strategy had to be informed and supported by an empirical study of the shortcomings in the existing situation in the tourism sector. In order to achieve this objective, this research, which is a comprehensive case study on the tourism sector in Zimbabwe, deployed semi-structured interviews, questionnaires, observations and netnography to collect data. The case study was carried out in accordance with the steps for conducting a case as outlined by Yin guided by an interpretive paradigm. The entities and organisations that formed part of the case study were purposefully chosen to provide a representative sample of the tourism role-players in Zimbabwe. The samples were based on sample variation and feasibility (taking into consideration factors such as geographical location, organisational thrust and size). Data collection involved semi-structured interviews with various role-players in the tourism sector. The role-players interviewed included officials from the government, the regulator and from the service providers. The interviews were held in Harare, Bulawayo, Gweru, Chinhoyi, Matopos, Hwange and Victoria Falls. A Zimbabwe annual premier tourism expo, Sanganai/Hlanganani World Travel and Tourism Africa Fair, was also attended in order to interact with various players and to conduct formal and informal interviews. The questionnaires, which were completed by tourists, were administered in Harare, Hwange, Victoria Falls, Matopos, and the Beitbridge and Kazungula border posts. An online version of the questionnaire was also administered. The questionnaire link was e-mailed to tourists, as some of them did not have enough time to complete them during their stay in Zimbabwe and agreed to do so via email. The data was analysed in two phases - structured coding and thematic analysis. . Key factors were identified through structural coding and thematic analysis. Country-specific, sector-specific and organisationalspecific factors were identified for tourists, the government, the regulator and service providers. After a further analysis of the results, those that pointed to the same factors were grouped together and a deduction was made as a diagnosis of the problem was identified. The identified problems were synthesised into seven diagnostics: (i) lack of infrastructure and enabling services; (ii) e-customer relationship management; (iii) lack of collaboration and poor systems integration, (iv) policy and regulation; (v) lack of financial resources; (vi) poor ICT governance and (vii) poor human resource development. A guiding policy was then identified for each of the diagnostics, leading to a set of coherent actions. The research also showed the implementation of this set of actions that consisting of three layers, namely, government, regulator and service providers. This research contributes to the existing body of knowledge by providing a clear strategy formulation model and showing how the implementation will be rolled out. The ICT-related challenges were diagnosed, guiding policies formulated to address the situation and required coherent actions suggested. This research is deemed to be significant for understanding the future of ICT use in developing countries like Zimbabwe.
- Full Text:
- Date Issued: 2017
- Authors: Tsokota, Theo
- Date: 2017
- Subjects: Information technology -- Zimbabwe , Technological innovations -- Zimbabwe Tourism -- Zimbabwe -- Computer network resources Tourism -- Zimbabwe -- Data processing Tourism -- Environmental aspects -- Zimbabwe Sustainable tourism -- Zimbabwe
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/21340 , vital:29479
- Description: This research sought to develop an ICT strategy for sustainable tourism in Zimbabwe. The Government of Zimbabwe has identified ICT and tourism both as strategic industries and pillars for economic revival. The tourism sector was identified as an essential source of foreign exchange earnings and as a means to drive the economy to greater heights and reduce poverty through direct employment in down-stream and up-stream industries. Despite being endowed with rich natural resources that include five World Natural Heritage sites, exquisite flora and fauna. Zimbabwe is not performing well in the world tourism sector. The Southern African country continues to be ranked low on World Economic Forum Travel and Tourism Competitiveness Index. Despite the country‘s strengths, in terms of endowments, the low Tourism and Travel Competitiveness Index suggests weaknesses in related areas. There is currently no clear strategy for the sustainable use of ICT in the tourism sector in Zimbabwe. Despite huge investments and advances in ICT, services in the tourism sector in Zimbabwe continue to be delivered manually and in traditional ways. Therefore, this research sought to propose a strategy for the sustainable use of ICT in the tourism sector in Zimbabwe. However, this strategy had to be informed and supported by an empirical study of the shortcomings in the existing situation in the tourism sector. In order to achieve this objective, this research, which is a comprehensive case study on the tourism sector in Zimbabwe, deployed semi-structured interviews, questionnaires, observations and netnography to collect data. The case study was carried out in accordance with the steps for conducting a case as outlined by Yin guided by an interpretive paradigm. The entities and organisations that formed part of the case study were purposefully chosen to provide a representative sample of the tourism role-players in Zimbabwe. The samples were based on sample variation and feasibility (taking into consideration factors such as geographical location, organisational thrust and size). Data collection involved semi-structured interviews with various role-players in the tourism sector. The role-players interviewed included officials from the government, the regulator and from the service providers. The interviews were held in Harare, Bulawayo, Gweru, Chinhoyi, Matopos, Hwange and Victoria Falls. A Zimbabwe annual premier tourism expo, Sanganai/Hlanganani World Travel and Tourism Africa Fair, was also attended in order to interact with various players and to conduct formal and informal interviews. The questionnaires, which were completed by tourists, were administered in Harare, Hwange, Victoria Falls, Matopos, and the Beitbridge and Kazungula border posts. An online version of the questionnaire was also administered. The questionnaire link was e-mailed to tourists, as some of them did not have enough time to complete them during their stay in Zimbabwe and agreed to do so via email. The data was analysed in two phases - structured coding and thematic analysis. . Key factors were identified through structural coding and thematic analysis. Country-specific, sector-specific and organisationalspecific factors were identified for tourists, the government, the regulator and service providers. After a further analysis of the results, those that pointed to the same factors were grouped together and a deduction was made as a diagnosis of the problem was identified. The identified problems were synthesised into seven diagnostics: (i) lack of infrastructure and enabling services; (ii) e-customer relationship management; (iii) lack of collaboration and poor systems integration, (iv) policy and regulation; (v) lack of financial resources; (vi) poor ICT governance and (vii) poor human resource development. A guiding policy was then identified for each of the diagnostics, leading to a set of coherent actions. The research also showed the implementation of this set of actions that consisting of three layers, namely, government, regulator and service providers. This research contributes to the existing body of knowledge by providing a clear strategy formulation model and showing how the implementation will be rolled out. The ICT-related challenges were diagnosed, guiding policies formulated to address the situation and required coherent actions suggested. This research is deemed to be significant for understanding the future of ICT use in developing countries like Zimbabwe.
- Full Text:
- Date Issued: 2017
Cost and reward as motivating factors in distributed collaborative learning assignments : a grounded theory analasis
- Van Niekerk, Johanna Cornelia
- Authors: Van Niekerk, Johanna Cornelia
- Date: 2009
- Subjects: Group work in education -- South Africa , Team learning approach in education -- South Africa , Education -- Experimental methods
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9764 , http://hdl.handle.net/10948/1103 , Group work in education -- South Africa , Team learning approach in education -- South Africa , Education -- Experimental methods
- Description: The objective of this research study was to obtain a better understanding of the factors that affect lecturer and student participation in distributed collaborative learning assignments (DCLAs). A substantial number of courses worldwide have included DCLAs in their curricula in an attempt to teach students virtual communication and teaming skills, and to allow distributed students to learn course content collaboratively in a virtual environment. The execution and management of these assignments have proven to be more challenging that expected. Several attempts reported on in the literature had to be abandoned when cost exceeded the rewards for both lecturers and students. In a fouryear cyclical action research project carried out at the PETech (Port Elizabeth Technikon, currently part of the Nelson Mandela Metropolitan University, South Africa), ICT students at several of the PETech campuses were required to complete a DCLA in virtual teams. This project also had to be terminated when it was realised that virtual team learning was minimal and the time investment unacceptably high. For the research study reported on in this thesis the data collected during the four “preresearch” cycles and the experiences reported in the literature were analysed. The lessons learnt were applied to a new additional DCLA cycle which formed part of an ICT course, although this execution still showed room for improvement. A second additional cycle was then executed which had a high participation rate and was overwhelmingly labelled by the participating students as a valuable and enjoyable learning experience. Analysis of the factors affecting participation in DCLAs shows that they are numerous and tightly interlinked, and that each factor is able to take on a wide range of values. This complicates descriptive reporting as each of the DCLAs was unique with unique outcomes and would have to be reported as such in order to iii ABSTRACT iv gain an understanding of the factors. Hence, a level of abstraction was needed, which was accomplished by applying the traditional Glaserian grounded theory method to the data collected during the four “preresearch” and the two additional cycles, and from the literature on the topic. The outcome is a perceived costs and rewards (PCR) theory for participation in DCLAs. As participation is crucial for the learning experience of each student as well as his/her team members in an action learning environment, deciding on participation by continually calculating the costs versus rewards became the focal point of the theory. To the best of the author’s knowledge this research study makes a theoretical contribution to the existing body of ICT educational knowledge in the form of a perceived costs and rewards theory for DCLA participation and a practical contribution in that it provides a theory that can be used to explain, understand, interpret and predict participation in DCLAs. This research study provides guidance for future research in both of these areas.
- Full Text:
- Date Issued: 2009
- Authors: Van Niekerk, Johanna Cornelia
- Date: 2009
- Subjects: Group work in education -- South Africa , Team learning approach in education -- South Africa , Education -- Experimental methods
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9764 , http://hdl.handle.net/10948/1103 , Group work in education -- South Africa , Team learning approach in education -- South Africa , Education -- Experimental methods
- Description: The objective of this research study was to obtain a better understanding of the factors that affect lecturer and student participation in distributed collaborative learning assignments (DCLAs). A substantial number of courses worldwide have included DCLAs in their curricula in an attempt to teach students virtual communication and teaming skills, and to allow distributed students to learn course content collaboratively in a virtual environment. The execution and management of these assignments have proven to be more challenging that expected. Several attempts reported on in the literature had to be abandoned when cost exceeded the rewards for both lecturers and students. In a fouryear cyclical action research project carried out at the PETech (Port Elizabeth Technikon, currently part of the Nelson Mandela Metropolitan University, South Africa), ICT students at several of the PETech campuses were required to complete a DCLA in virtual teams. This project also had to be terminated when it was realised that virtual team learning was minimal and the time investment unacceptably high. For the research study reported on in this thesis the data collected during the four “preresearch” cycles and the experiences reported in the literature were analysed. The lessons learnt were applied to a new additional DCLA cycle which formed part of an ICT course, although this execution still showed room for improvement. A second additional cycle was then executed which had a high participation rate and was overwhelmingly labelled by the participating students as a valuable and enjoyable learning experience. Analysis of the factors affecting participation in DCLAs shows that they are numerous and tightly interlinked, and that each factor is able to take on a wide range of values. This complicates descriptive reporting as each of the DCLAs was unique with unique outcomes and would have to be reported as such in order to iii ABSTRACT iv gain an understanding of the factors. Hence, a level of abstraction was needed, which was accomplished by applying the traditional Glaserian grounded theory method to the data collected during the four “preresearch” and the two additional cycles, and from the literature on the topic. The outcome is a perceived costs and rewards (PCR) theory for participation in DCLAs. As participation is crucial for the learning experience of each student as well as his/her team members in an action learning environment, deciding on participation by continually calculating the costs versus rewards became the focal point of the theory. To the best of the author’s knowledge this research study makes a theoretical contribution to the existing body of ICT educational knowledge in the form of a perceived costs and rewards theory for DCLA participation and a practical contribution in that it provides a theory that can be used to explain, understand, interpret and predict participation in DCLAs. This research study provides guidance for future research in both of these areas.
- Full Text:
- Date Issued: 2009
Design of a dedicated IFT microcontroller
- Authors: Himunzowa, Grayson
- Date: 2018
- Subjects: Feedback control systems , Automatic control , Engineering design -- Data processing
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/30017 , vital:30809
- Description: The design of a Dedicated IFT Microcontroller originated from the successful implementation of the Iterative Feedback Tuning (IFT) technique into the Digital Signal Processor microcontroller (DSP56F807C) at the University of Cape Town in 2006. However, implementation of the IFT technique on a general-purpose microcontroller is neither optimal, nor a cost-effective exercise, as most of the microcontroller peripherals remain unused, and drain energy for doing nothing. In addition, microcontrollers and DSPs are software-driven devices whose nature is sequential in executing algorithms, and hence have a significant effect on the bandwidth of the closed-loop control. To mitigate the said problem, the design of a Dedicated IFT Microcontroller is proposed in this thesis. To accomplish this goal, the preliminary task was to explore the IFT theory and its applications, followed by a review of the literature on FPGA design methodology for industrial control systems, Microcontroller design principles, and FPGA theory and trends. Furthermore, a survey of electronic design automation (EDA) tools and other application software was also conducted. After the literature review, the IFT was investigated exhaustively by applying it to three types of plants, namely: a DC motor, an oscillatory plant, and an unstable plant. Each of these plants were tested using three types of initial controllers, namely heavilydamped, critically damped and under-damped initial controllers. The plants were also tested by varying the amplitude of the reference signal, followed by using a single-step signal of constant amplitude of one volt. The intention of exploring all of these possibilities was meant to firmly expose the IFT boundaries of applicability, so that the final product would not be vulnerable to unnecessary post-production discoveries. The design methodology adopted in this research was a popular hierarchical and modular top-down procedure, which is an array of abstraction levels that are detailed as: system level, behavioural level, Register-Transfer Level (RTL) and Gate level. At system level, the Dedicated IFT Microcontroller was defined. Thereafter, at behavioural level, the design was simulated using VHDL, created by porting the LabView IFT code to the Xilinx EDA tool. At the RTL, the synthesisable VHDL code utilising fixed-point number representation was written. The compiled bit file was downloaded onto National Instruments (NI) Digital Electronics FPGA Board featuring iii the Spartan 3 series FPGA. This was tested, using a method known as simulation in the hardware. The key contribution of this thesis is the experimental validation of the IFT technique on FPGA hardware as it has never been published before, the work described in chapter four and five. The other contribution is the analysis of 1DOF IFT technique in terms of limitations of applicability for correct implementation, which is the main work of chapter three. This work could be used to explore other computational methods, like the use of floating-point number representation for high resolution and accuracy in numerical computations. Another avenue that could be exploited is Xilinx's recent Vivado methodology, which has the capacity for traditional programming languages like C or C++, as these have in-built floating-point number capability. Finally, out of this work, two papers have already been published by Springer and IEEE Xplore Publishers, and a journal paper has also been written for publication in the Control Systems Technology journal.
- Full Text:
- Date Issued: 2018
- Authors: Himunzowa, Grayson
- Date: 2018
- Subjects: Feedback control systems , Automatic control , Engineering design -- Data processing
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/30017 , vital:30809
- Description: The design of a Dedicated IFT Microcontroller originated from the successful implementation of the Iterative Feedback Tuning (IFT) technique into the Digital Signal Processor microcontroller (DSP56F807C) at the University of Cape Town in 2006. However, implementation of the IFT technique on a general-purpose microcontroller is neither optimal, nor a cost-effective exercise, as most of the microcontroller peripherals remain unused, and drain energy for doing nothing. In addition, microcontrollers and DSPs are software-driven devices whose nature is sequential in executing algorithms, and hence have a significant effect on the bandwidth of the closed-loop control. To mitigate the said problem, the design of a Dedicated IFT Microcontroller is proposed in this thesis. To accomplish this goal, the preliminary task was to explore the IFT theory and its applications, followed by a review of the literature on FPGA design methodology for industrial control systems, Microcontroller design principles, and FPGA theory and trends. Furthermore, a survey of electronic design automation (EDA) tools and other application software was also conducted. After the literature review, the IFT was investigated exhaustively by applying it to three types of plants, namely: a DC motor, an oscillatory plant, and an unstable plant. Each of these plants were tested using three types of initial controllers, namely heavilydamped, critically damped and under-damped initial controllers. The plants were also tested by varying the amplitude of the reference signal, followed by using a single-step signal of constant amplitude of one volt. The intention of exploring all of these possibilities was meant to firmly expose the IFT boundaries of applicability, so that the final product would not be vulnerable to unnecessary post-production discoveries. The design methodology adopted in this research was a popular hierarchical and modular top-down procedure, which is an array of abstraction levels that are detailed as: system level, behavioural level, Register-Transfer Level (RTL) and Gate level. At system level, the Dedicated IFT Microcontroller was defined. Thereafter, at behavioural level, the design was simulated using VHDL, created by porting the LabView IFT code to the Xilinx EDA tool. At the RTL, the synthesisable VHDL code utilising fixed-point number representation was written. The compiled bit file was downloaded onto National Instruments (NI) Digital Electronics FPGA Board featuring iii the Spartan 3 series FPGA. This was tested, using a method known as simulation in the hardware. The key contribution of this thesis is the experimental validation of the IFT technique on FPGA hardware as it has never been published before, the work described in chapter four and five. The other contribution is the analysis of 1DOF IFT technique in terms of limitations of applicability for correct implementation, which is the main work of chapter three. This work could be used to explore other computational methods, like the use of floating-point number representation for high resolution and accuracy in numerical computations. Another avenue that could be exploited is Xilinx's recent Vivado methodology, which has the capacity for traditional programming languages like C or C++, as these have in-built floating-point number capability. Finally, out of this work, two papers have already been published by Springer and IEEE Xplore Publishers, and a journal paper has also been written for publication in the Control Systems Technology journal.
- Full Text:
- Date Issued: 2018
Developing an e-health framework through electronic healthcare readiness assessment
- Authors: Coleman, Alfred
- Date: 2010
- Subjects: Health -- Computer network resources , Medical care -- South Africa -- Computer network resources , Public health -- South Africa -- Computer network resources , Internet in medicine -- South Africa , Medical informatics -- South Africa , Telecommunication in medicine -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9729 , http://hdl.handle.net/10948/1519 , Health -- Computer network resources , Medical care -- South Africa -- Computer network resources , Public health -- South Africa -- Computer network resources , Internet in medicine -- South Africa , Medical informatics -- South Africa , Telecommunication in medicine -- South Africa
- Description: The major socio-economic development challenges facing most African countries include economic diversification, poverty, unemployment, diseases and the unsustainable use of natural resources. The challenge of quality healthcare provisioning is compounded by the HIV/AIDS pandemic in Sub Saharan Africa. However, there is a great potential in using electronic healthcare (e-health) as one of the supportive systems within the healthcare sector to address these pressing challenges facing healthcare systems in developing countries, including solving inequalities in healthcare delivery between rural and urban hospitals/clinics. The purpose of this study was to compile a Provincial E-health Framework (PEHF) based on the feedback from electronic healthcare readiness assessments conducted in selected rural and urban hospitals/clinics in the North West Province in South Africa. The e-healthcare readiness assessment was conducted in the light of effective use of ICT in patient healthcare record system, consultation among healthcare professionals, prescription of medication, referral of patients and training of healthcare professionals in ICT usage. The study was divided into two phases which were phases 1 and 2 and a qualitative design supported by a case study approach was used. Data were collected using different techniques to enhance triangulation of data. The techniques included group interviews, qualitative questionnaires, photographs, document analysis and expert opinions. The outcome of the assessment led to the compilation of the PEHF which was based on Service Oriented Architecture (SOA). SOA was chosen to integrate the hospitals/clinics‟ ICT infrastructure yet allowing each hospital/clinic the autonomy to control its own ICT environment. To assist hospitals/clinics integrate their ICT resources, this research study proposed an Infrastructure Network Architecture which clustered hospitals/clinics to share common ICT infrastructure instead of duplicating these resources. Furthermore, processes of the e-health services (e-patient health IV record system, e-consultation system, e-prescription system, e-referral system and e-training system) were provided to assist in the implementation of the PEHF. Finally, a set of guidelines were provided by the research study to aid the implementation of the PEHF.
- Full Text:
- Date Issued: 2010
- Authors: Coleman, Alfred
- Date: 2010
- Subjects: Health -- Computer network resources , Medical care -- South Africa -- Computer network resources , Public health -- South Africa -- Computer network resources , Internet in medicine -- South Africa , Medical informatics -- South Africa , Telecommunication in medicine -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9729 , http://hdl.handle.net/10948/1519 , Health -- Computer network resources , Medical care -- South Africa -- Computer network resources , Public health -- South Africa -- Computer network resources , Internet in medicine -- South Africa , Medical informatics -- South Africa , Telecommunication in medicine -- South Africa
- Description: The major socio-economic development challenges facing most African countries include economic diversification, poverty, unemployment, diseases and the unsustainable use of natural resources. The challenge of quality healthcare provisioning is compounded by the HIV/AIDS pandemic in Sub Saharan Africa. However, there is a great potential in using electronic healthcare (e-health) as one of the supportive systems within the healthcare sector to address these pressing challenges facing healthcare systems in developing countries, including solving inequalities in healthcare delivery between rural and urban hospitals/clinics. The purpose of this study was to compile a Provincial E-health Framework (PEHF) based on the feedback from electronic healthcare readiness assessments conducted in selected rural and urban hospitals/clinics in the North West Province in South Africa. The e-healthcare readiness assessment was conducted in the light of effective use of ICT in patient healthcare record system, consultation among healthcare professionals, prescription of medication, referral of patients and training of healthcare professionals in ICT usage. The study was divided into two phases which were phases 1 and 2 and a qualitative design supported by a case study approach was used. Data were collected using different techniques to enhance triangulation of data. The techniques included group interviews, qualitative questionnaires, photographs, document analysis and expert opinions. The outcome of the assessment led to the compilation of the PEHF which was based on Service Oriented Architecture (SOA). SOA was chosen to integrate the hospitals/clinics‟ ICT infrastructure yet allowing each hospital/clinic the autonomy to control its own ICT environment. To assist hospitals/clinics integrate their ICT resources, this research study proposed an Infrastructure Network Architecture which clustered hospitals/clinics to share common ICT infrastructure instead of duplicating these resources. Furthermore, processes of the e-health services (e-patient health IV record system, e-consultation system, e-prescription system, e-referral system and e-training system) were provided to assist in the implementation of the PEHF. Finally, a set of guidelines were provided by the research study to aid the implementation of the PEHF.
- Full Text:
- Date Issued: 2010
Development of a creep sample retrieval technique and friction weld site repair procedure
- Authors: Wedderburn, Ian Norman
- Date: 2013
- Subjects: Friction welding
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9635 , http://hdl.handle.net/10948/d1020116
- Description: The remnant life monitoring of creep loaded high temperature and pressure components in power stations is critical to ensuring their safe and cost effective operation as failures can have severe consequences. Effective creep life condition monitoring allows for optimising component life predictions and subsequent plant maintenance decisions. In South Africa many power generation stations have been in operation well beyond their 30 year design service life, as such knowledge of the remnant creep life of high temperature and pressure components, such as steam pipelines, becomes of utmost importance. Techniques for the remnant creep life assessments of critical high temperature and pressure components must therefore be as effective as possible. The common and well accepted in-situ inspection technique for assessing creep damage in steam pipes is by the metallographic replication technique. The technique is however limited to the outer surface of the pipe, without information on damage within the wall. This research will illustrate a means of obtaining a sample for creep life analysis with depth through the wall of a pipe, as wells as an alternative technique for the repair of the sample retrieval site. A sample retrieval technique was developed that would retrieve a small diameter cylindrical sample from a cored blind hole for creep analysis by visual creep void assessment or by the small punch creep test. The small punch creep test requires only a small diameter thin disc of material for testing for which its results are comparable with conventional uniaxial creep testing which requires a much larger sample of material. The smaller sample requirement of the small punch creep test therefore allows for a vastly reduced invasive sample retrieval operation and consequently smaller repair size area. Also the fact that the sample is retrieved from a blind hole is advantageous since the pipe wall is not penetrated which would require full plant shutdown. A friction welding technique was identified as an alternative to traditional arc fusion welding for the repair of the sample retrieval site, this technique being the Friction Hydro Pillar Processing technique. Friction Hydro Pillar Processing is a solid-state welding technique and as such has a number of inherent benefits over arc fusion welding as the weld is performed below the melting temperature of the material. From a process point of view Friction Hydro Pillar Processing is ideally suited for automation, has virtually no fumes generated, minimal distortion is experienced and no spatter has to be removed afterwards. The technique has yet to see industrial application and as such development of suitable process parameters was undertaken. Finally, to apply the sample retrieval and repair operations in-situ to a steam pipe in a power plant suitable equipment was developed. Existing friction welding equipment is generally bulky workshop based equipment and is unsuitable for on-site work due to its size and weight. Therefore development of dedicated equipment was required to enable Friction Hydro Pillar Processing to be applied to steam pipes within a power plant environment.
- Full Text:
- Date Issued: 2013
- Authors: Wedderburn, Ian Norman
- Date: 2013
- Subjects: Friction welding
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9635 , http://hdl.handle.net/10948/d1020116
- Description: The remnant life monitoring of creep loaded high temperature and pressure components in power stations is critical to ensuring their safe and cost effective operation as failures can have severe consequences. Effective creep life condition monitoring allows for optimising component life predictions and subsequent plant maintenance decisions. In South Africa many power generation stations have been in operation well beyond their 30 year design service life, as such knowledge of the remnant creep life of high temperature and pressure components, such as steam pipelines, becomes of utmost importance. Techniques for the remnant creep life assessments of critical high temperature and pressure components must therefore be as effective as possible. The common and well accepted in-situ inspection technique for assessing creep damage in steam pipes is by the metallographic replication technique. The technique is however limited to the outer surface of the pipe, without information on damage within the wall. This research will illustrate a means of obtaining a sample for creep life analysis with depth through the wall of a pipe, as wells as an alternative technique for the repair of the sample retrieval site. A sample retrieval technique was developed that would retrieve a small diameter cylindrical sample from a cored blind hole for creep analysis by visual creep void assessment or by the small punch creep test. The small punch creep test requires only a small diameter thin disc of material for testing for which its results are comparable with conventional uniaxial creep testing which requires a much larger sample of material. The smaller sample requirement of the small punch creep test therefore allows for a vastly reduced invasive sample retrieval operation and consequently smaller repair size area. Also the fact that the sample is retrieved from a blind hole is advantageous since the pipe wall is not penetrated which would require full plant shutdown. A friction welding technique was identified as an alternative to traditional arc fusion welding for the repair of the sample retrieval site, this technique being the Friction Hydro Pillar Processing technique. Friction Hydro Pillar Processing is a solid-state welding technique and as such has a number of inherent benefits over arc fusion welding as the weld is performed below the melting temperature of the material. From a process point of view Friction Hydro Pillar Processing is ideally suited for automation, has virtually no fumes generated, minimal distortion is experienced and no spatter has to be removed afterwards. The technique has yet to see industrial application and as such development of suitable process parameters was undertaken. Finally, to apply the sample retrieval and repair operations in-situ to a steam pipe in a power plant suitable equipment was developed. Existing friction welding equipment is generally bulky workshop based equipment and is unsuitable for on-site work due to its size and weight. Therefore development of dedicated equipment was required to enable Friction Hydro Pillar Processing to be applied to steam pipes within a power plant environment.
- Full Text:
- Date Issued: 2013
Drivers and consequences of residents' satisfaction with off-campus student housing in South-South, Nigeria
- Authors: Bella-Omunagbe, Ojo Cyprain
- Date: 2015
- Subjects: Student housing -- Nigeria , Housing -- Resident satisfaction , Residence and education , Universities and colleges -- Nigeria -- Administration
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9720 , http://hdl.handle.net/10948/d1021198
- Description: The student housing system worldwide and South-South Nigeria in particular has witnessed an unprecedented transformation, such that private off-campus student housing facilities (SHFs) are now the primary source of accommodation for students in tertiary institutions. A considerable gap exists between the supply and demand for on-campus student housing and the quest to fill this gap has stimulated the creation of a significant student housing market in the areas where these tertiary institutions are located. The prospect for economic investments in the student housing sector is high and private investors are involved in the provision and management of offcampus student housing. The main consequence of this practice in South-South, Nigeria is the delivery of low-quality buildings that are not able to meet the needs and expectations of residents. SHFs that are constructed without due regard to residents needs are characterised by dissatisfaction with attributes of housing and low investment performance. The implication is that residence users are often not satisfied with the attributes of the residential environment that are provided; thus their behaviours often impose some consequences on investors gains and objectives.Therefore, understanding the dynamics among attributes that are important to students, that give the required satisfaction, and the impact of the availability or lack-of on behaviour such as loyalty, willingness to pay for attributes and word of mouth behaviour are critical to profitability. Most often, the relationship among these attributes are treated as linear and symmetrical with the assumed implication that better attributes produce improved behaviours. However, this may not always be the case. This approach is rarely addressed and is little understood in student housing studies. Therefore, the aim of this study was to identify student housing attributes that act as drivers of resident atisfaction and the consequences/effects of these drivers on student behaviour in order to determine appropriate measures that could be used to develop, maintain and upgrade student accommodation. The methodology of the study included an extensive literature review and a field study conducted to obtain the perceptions of students in seven tertiary institutions located in South-South, Nigeria. The main task was to define attributes of student housing facilities based on the symmetric and asymmetric impact of the performance of attributes on satisfaction with residence. The Kano model and importance-performance analysis (IPA) were used to establish sets of criteria that could be used to prioritise attributes that are required in student housing for optimal investor gains. Analysis of the findings lead to the conclusions that different degrees of behaviour were associated to the perception of importance that is attached to attributes by residents and the satisfaction that is derived from the use of such attributes. The implication of the conclusions is that to meet users satisfaction needs, varied improvement strategies are required for different attributes in order to maximise the use of resources for maximum gains. The recommendations for investors in SHFs include among others to segment the SHFs market based on demographic characteristics, prioritise and provide only attributes that add-value to identified groups. Emphasis should also be placed on providing attributes that are not only satisfactory, but with capacity to improve loyalty/retention, willingness to pay and positive word of mouth behaviour. It is also recommended that the local authority should improve critical attributes that are deemed to be outside the scope of the investors.
- Full Text:
- Date Issued: 2015
- Authors: Bella-Omunagbe, Ojo Cyprain
- Date: 2015
- Subjects: Student housing -- Nigeria , Housing -- Resident satisfaction , Residence and education , Universities and colleges -- Nigeria -- Administration
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9720 , http://hdl.handle.net/10948/d1021198
- Description: The student housing system worldwide and South-South Nigeria in particular has witnessed an unprecedented transformation, such that private off-campus student housing facilities (SHFs) are now the primary source of accommodation for students in tertiary institutions. A considerable gap exists between the supply and demand for on-campus student housing and the quest to fill this gap has stimulated the creation of a significant student housing market in the areas where these tertiary institutions are located. The prospect for economic investments in the student housing sector is high and private investors are involved in the provision and management of offcampus student housing. The main consequence of this practice in South-South, Nigeria is the delivery of low-quality buildings that are not able to meet the needs and expectations of residents. SHFs that are constructed without due regard to residents needs are characterised by dissatisfaction with attributes of housing and low investment performance. The implication is that residence users are often not satisfied with the attributes of the residential environment that are provided; thus their behaviours often impose some consequences on investors gains and objectives.Therefore, understanding the dynamics among attributes that are important to students, that give the required satisfaction, and the impact of the availability or lack-of on behaviour such as loyalty, willingness to pay for attributes and word of mouth behaviour are critical to profitability. Most often, the relationship among these attributes are treated as linear and symmetrical with the assumed implication that better attributes produce improved behaviours. However, this may not always be the case. This approach is rarely addressed and is little understood in student housing studies. Therefore, the aim of this study was to identify student housing attributes that act as drivers of resident atisfaction and the consequences/effects of these drivers on student behaviour in order to determine appropriate measures that could be used to develop, maintain and upgrade student accommodation. The methodology of the study included an extensive literature review and a field study conducted to obtain the perceptions of students in seven tertiary institutions located in South-South, Nigeria. The main task was to define attributes of student housing facilities based on the symmetric and asymmetric impact of the performance of attributes on satisfaction with residence. The Kano model and importance-performance analysis (IPA) were used to establish sets of criteria that could be used to prioritise attributes that are required in student housing for optimal investor gains. Analysis of the findings lead to the conclusions that different degrees of behaviour were associated to the perception of importance that is attached to attributes by residents and the satisfaction that is derived from the use of such attributes. The implication of the conclusions is that to meet users satisfaction needs, varied improvement strategies are required for different attributes in order to maximise the use of resources for maximum gains. The recommendations for investors in SHFs include among others to segment the SHFs market based on demographic characteristics, prioritise and provide only attributes that add-value to identified groups. Emphasis should also be placed on providing attributes that are not only satisfactory, but with capacity to improve loyalty/retention, willingness to pay and positive word of mouth behaviour. It is also recommended that the local authority should improve critical attributes that are deemed to be outside the scope of the investors.
- Full Text:
- Date Issued: 2015
Guidelines for cybersecurity education campaigns
- Authors: Reid, Rayne
- Date: 2017
- Subjects: Computer security Computer networks -- Security measures
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/14091 , vital:27416
- Description: In our technology- and information-infused world, cyberspace is an integral part of modern-day society. As the number of active cyberspace users increases, so too does the chances of a cyber threat finding a vulnerable target increase. All cyber users who are exposed to cyber risks need to be educated about cyber security. Human beings play a key role in the implementation and governing of an entire cybersecurity and cybersafety solution. The effectiveness of any cybersecurity and cybersafety solutions in a societal or individual context is dependent on the human beings involved in the process. If these human beings are either unaware or not knowledgeable about their roles in the security solution they become the weak link in these cybersecurity solutions. It is essential that all users be educated to combat any threats. Children are a particularly vulnerable subgroup within society. They are digital natives and make use of ICT, and online services with increasing frequency, but this does not mean they are knowledgeable about or behaving securely in their cyber activities. Children will be exposed to cyberspace throughout their lifetimes. Therefore, cybersecurity and cybersafety should be taught to children as a life-skill. There is a lack of well-known, comprehensive cybersecurity and cybersafety educational campaigns which target school children. Most existing information security and cybersecurity education campaigns limit their scope. Literature reports mainly on education campaigns focused on primary businesses, government agencies and tertiary education institutions. Additionally, most guidance for the design and implementation of security and safety campaigns: are for an organisational context, only target organisational users, and mostly provide high-level design recommendations. This thesis addressed the lack of guidance for designing and implementing cybersecurity and cybersafety educational campaigns suited to school learners as a target audience. The thesis aimed to offer guidance for designing and implementing education campaigns that educate school learners about cybersecurity and cybersafety. This was done through the implementation of an action research process over a five-year period. The action research process involved cybersecurity and cybersafety educational interventions at multiple schools. A total of 18 actionable guidelines were derived from this research to guide the design and implementation of cybersecurity and cybersafety education campaigns which aim to educate school children.
- Full Text:
- Date Issued: 2017
- Authors: Reid, Rayne
- Date: 2017
- Subjects: Computer security Computer networks -- Security measures
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/14091 , vital:27416
- Description: In our technology- and information-infused world, cyberspace is an integral part of modern-day society. As the number of active cyberspace users increases, so too does the chances of a cyber threat finding a vulnerable target increase. All cyber users who are exposed to cyber risks need to be educated about cyber security. Human beings play a key role in the implementation and governing of an entire cybersecurity and cybersafety solution. The effectiveness of any cybersecurity and cybersafety solutions in a societal or individual context is dependent on the human beings involved in the process. If these human beings are either unaware or not knowledgeable about their roles in the security solution they become the weak link in these cybersecurity solutions. It is essential that all users be educated to combat any threats. Children are a particularly vulnerable subgroup within society. They are digital natives and make use of ICT, and online services with increasing frequency, but this does not mean they are knowledgeable about or behaving securely in their cyber activities. Children will be exposed to cyberspace throughout their lifetimes. Therefore, cybersecurity and cybersafety should be taught to children as a life-skill. There is a lack of well-known, comprehensive cybersecurity and cybersafety educational campaigns which target school children. Most existing information security and cybersecurity education campaigns limit their scope. Literature reports mainly on education campaigns focused on primary businesses, government agencies and tertiary education institutions. Additionally, most guidance for the design and implementation of security and safety campaigns: are for an organisational context, only target organisational users, and mostly provide high-level design recommendations. This thesis addressed the lack of guidance for designing and implementing cybersecurity and cybersafety educational campaigns suited to school learners as a target audience. The thesis aimed to offer guidance for designing and implementing education campaigns that educate school learners about cybersecurity and cybersafety. This was done through the implementation of an action research process over a five-year period. The action research process involved cybersecurity and cybersafety educational interventions at multiple schools. A total of 18 actionable guidelines were derived from this research to guide the design and implementation of cybersecurity and cybersafety education campaigns which aim to educate school children.
- Full Text:
- Date Issued: 2017
Health information technologies for improved continuity of care: a South African perspective
- Authors: Mostert-Phipps, Nicolette
- Date: 2011
- Subjects: Medical records -- Data processing , Medical technology -- South Africa , Medical innovations -- South Africa , Health -- Information services
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9730 , http://hdl.handle.net/10948/1619 , Medical records -- Data processing , Medical technology -- South Africa , Medical innovations -- South Africa , Health -- Information services
- Description: The fragmented nature of modern health care provision makes it increasingly difficult to achieve continuity of care. This is equally true in the context of the South African healthcare landscape. This results in a strong emphasis on the informational dimension of continuity of care which highlights the importance of the continuity of medical records. Paper-based methods of record keeping are inadequate to support informational continuity of care which leads to an increased interest in electronic methods of record keeping through the adoption of various Health Information Technologies (HITs). This research project investigates the role that various HITs such as Personal Health Records (PHRs), Electronic Medical Records (EMRs), and Health Information Exchanges (HIEs) can play in improving informational continuity of care resulting in the development of a standards-based technological model for the South African healthcare sector. This technological model employs appropriate HITs to address the problem of informational continuity of care in the South African healthcare landscape The benefits that are possible through the adoption of the proposed technological model can only be realized if the proposed HITs are used in a meaningful manner once adopted and implemented. The Delphi method is employed to identify factors that need to be addressed to encourage the adoption and meaningful use of such HITs in the South African healthcare landscape. Lastly, guidelines are formulated to encourage the adoption and meaningful use of HITs in the South African healthcare landscape to improve the continuity of care. The guidelines address both the technological requirements on a high level, as well as the factors that need to be addressed to encourage the adoption and meaningful use of the technological components suggested. These guidelines will play a significant role in raising awareness of the factors that need to be addressed to create an environment conducive to the adoption and meaningful use of appropriate HITs in order to improve the continuity of care in the South African healthcare landscape.
- Full Text:
- Date Issued: 2011
- Authors: Mostert-Phipps, Nicolette
- Date: 2011
- Subjects: Medical records -- Data processing , Medical technology -- South Africa , Medical innovations -- South Africa , Health -- Information services
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9730 , http://hdl.handle.net/10948/1619 , Medical records -- Data processing , Medical technology -- South Africa , Medical innovations -- South Africa , Health -- Information services
- Description: The fragmented nature of modern health care provision makes it increasingly difficult to achieve continuity of care. This is equally true in the context of the South African healthcare landscape. This results in a strong emphasis on the informational dimension of continuity of care which highlights the importance of the continuity of medical records. Paper-based methods of record keeping are inadequate to support informational continuity of care which leads to an increased interest in electronic methods of record keeping through the adoption of various Health Information Technologies (HITs). This research project investigates the role that various HITs such as Personal Health Records (PHRs), Electronic Medical Records (EMRs), and Health Information Exchanges (HIEs) can play in improving informational continuity of care resulting in the development of a standards-based technological model for the South African healthcare sector. This technological model employs appropriate HITs to address the problem of informational continuity of care in the South African healthcare landscape The benefits that are possible through the adoption of the proposed technological model can only be realized if the proposed HITs are used in a meaningful manner once adopted and implemented. The Delphi method is employed to identify factors that need to be addressed to encourage the adoption and meaningful use of such HITs in the South African healthcare landscape. Lastly, guidelines are formulated to encourage the adoption and meaningful use of HITs in the South African healthcare landscape to improve the continuity of care. The guidelines address both the technological requirements on a high level, as well as the factors that need to be addressed to encourage the adoption and meaningful use of the technological components suggested. These guidelines will play a significant role in raising awareness of the factors that need to be addressed to create an environment conducive to the adoption and meaningful use of appropriate HITs in order to improve the continuity of care in the South African healthcare landscape.
- Full Text:
- Date Issued: 2011
Improving the supply of subsidised housing in South Africa
- Authors: Bekker, Jakobus Petrus
- Date: 2017
- Subjects: Housing -- South Africa Housing subsidies -- South Africa , Low-income housing -- South Africa Public housing -- South Africa Housing development -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/19553 , vital:28893
- Description: Despite South African citizen’s constitutional right to adequate housing, Government’s housing delivery has been described as a complex, multi-stakeholder, multi-phase problem, exacerbated by political interference and corruption. Housing delivery in South Africa is ideologically and politically designed and executed. However, the government subsidised housing sector remains plagued by: huge and increasing backlogs; corruption; quality concerns, and recipient and stakeholder dissatisfaction. This includes the government subsidised housing construction sector, which faces issues such as: established contractors leaving the sector; late and failed completion; substandard quality; rework; cost overruns; late progress payments; and insolvencies. Moreover, government subsidised housing officials, which forms part of this sector, must contend with abandoned projects and appointing new contractors; shoddy workmanship from sub-standard contractors; remedial work, including demolition and rebuilding; and systemic problems such as staff shortages and under qualified staff. The process of Government’s ideological and political designed and execution may therefore not have considered certain practicalities relative to construction principles and practice. It therefore appears that there may be some relationship between the compatibility of Government’s housing ideological and political designed (policy) and execution and general construction principles and practice. It is clear from the related literature that government subsidised housing construction has mostly been investigated as an exercise observing from the outside in, and not from a construction sector perspective. The main purpose of this study is thus to explore housing policy and practice compatibility as a major obstacle to housing delivery in general and assess whether the current housing policy is sufficiently responsive to the requirements of the government subsidised housing sector by specifically describing and exploring the effects of Government’s housing procurement policies relative to the ability of the construction sector to supply government subsidised housing. More specifically, the study describes and explores corruption, quality; contractors and worker competency, and government capacity as specific consequences of housing policy and practice incompatibility, as well as factors contributing to recipient dissatisfaction and the housing backlog. Finally, based on the finding, a proposed framework for improving the supply of subsidised housing in South Africa has been developed. The methodology for this study adopted a post-positivist philosophy, embracing a quantitative approach using questionnaires, which incorporated mainly five-point Likert type scale, but also multiple-choice questions, as instruments for data collection. Three surveys were conducted, starting with a pilot study and followed by a primary study, during which a total of 2 884 potential participants within the construction sector across South Africa were randomly sampled and solicited to participate, of which 284 responded. The respondents consisted of four groups: general contractors (76); government housing officials (34); built environment professionals (137), and built environment suppliers (37). An electronic questionnaire was sent by email to all potential participants and allowed four weeks to complete the survey. Furthermore, a housing recipient survey was conducted among 100 randomly selected recipients of government subsidised housing in the Nelson Mandela Metropolitan area, by means of a structured interview using a paper based questionnaire, over a period of two weeks. The primary outcome measures used for this study were the ranked mean scores for mainly descriptive analysis and the Chi-square test, the 𝑡-test, Cohan’s d test, ANOVA and Scheffé test, using Cronbach's alpha as a measure of internal consistency of scale and validity, for inferential analyses and hypotheses testing. Hypothesis testing was founded upon Government’s worldview that its policies will not influence the operations of the construction sector relative to housing construction, and therefore tested respondents’ perspectives with respect to the impact that government policies have in terms of contractor operations and contractor success, as well as its contribution towards the housing backlog, substandard housing, recipient dissatisfaction and corruption. The following results were obtained by means of the hypothesis testing:Government housing procurement policies are inappropriate for application in the government subsidised housing sector. Respondents therefore disagree with the notion that government policy and practices do not impact contractor operations and contractor success, and thus the supply of houses; The application of government housing procurement policies leads to inadequate quality. Respondents therefore disagree with the notion that government preferential procurement policies do not impact quality; Government’s housing procurement policies inappropriately target emerging contractors. Respondents therefore disagree with the notion that Government’s targeting of emerging contractors does not impact housing supply; Government has inadequate capacity to address subsidised housing construction sector requirements in terms of housing projects. Respondents therefore disagree with the notion that Government has the capacity to address subsidised housing construction sector requirements in the supply of housing, and Government subsidised houses do not meet recipients’ expectations. Respondents therefore disagree with the notion that government subsidised houses do meet recipients’ expectations. It thus became apparent that housing supply is mostly inhibited by Government’s housing procurement policy, contributing to various factors, such as quality capability, contractor capability, systemic and administrative capacity, and resulting in recipient dissatisfaction. Using Pearson’s product moment correlation, a framework model was developed to illustrate the process flow, which revealed definitive statistical and practical relationships between these factors, and indeed reflects complex relationships between factors inhibiting supply and resulting in recipient dissatisfaction. To find an appropriate framework model for the purpose of improving housing supply, various sources were consulted. Based on the research question, together with the aims and objectives for this study, as well as the realisation that the problems associated with housing supply relate to the project management of the construction phase, which requires interventions for improving supply, it was decided that a results framework would be the most appropriate for this purpose. The proposed framework is therefore a graphical depiction of how the research process may be used to identify problems in the government subsidised housing sector, questioning how these may be resolved, setting strategies to improve the situation, evolving hypotheses and testing these hypotheses to establish the critical factors to be considered in the process of resolving the problem in the housing sector, by means of implementation and feedback.
- Full Text:
- Date Issued: 2017
- Authors: Bekker, Jakobus Petrus
- Date: 2017
- Subjects: Housing -- South Africa Housing subsidies -- South Africa , Low-income housing -- South Africa Public housing -- South Africa Housing development -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/19553 , vital:28893
- Description: Despite South African citizen’s constitutional right to adequate housing, Government’s housing delivery has been described as a complex, multi-stakeholder, multi-phase problem, exacerbated by political interference and corruption. Housing delivery in South Africa is ideologically and politically designed and executed. However, the government subsidised housing sector remains plagued by: huge and increasing backlogs; corruption; quality concerns, and recipient and stakeholder dissatisfaction. This includes the government subsidised housing construction sector, which faces issues such as: established contractors leaving the sector; late and failed completion; substandard quality; rework; cost overruns; late progress payments; and insolvencies. Moreover, government subsidised housing officials, which forms part of this sector, must contend with abandoned projects and appointing new contractors; shoddy workmanship from sub-standard contractors; remedial work, including demolition and rebuilding; and systemic problems such as staff shortages and under qualified staff. The process of Government’s ideological and political designed and execution may therefore not have considered certain practicalities relative to construction principles and practice. It therefore appears that there may be some relationship between the compatibility of Government’s housing ideological and political designed (policy) and execution and general construction principles and practice. It is clear from the related literature that government subsidised housing construction has mostly been investigated as an exercise observing from the outside in, and not from a construction sector perspective. The main purpose of this study is thus to explore housing policy and practice compatibility as a major obstacle to housing delivery in general and assess whether the current housing policy is sufficiently responsive to the requirements of the government subsidised housing sector by specifically describing and exploring the effects of Government’s housing procurement policies relative to the ability of the construction sector to supply government subsidised housing. More specifically, the study describes and explores corruption, quality; contractors and worker competency, and government capacity as specific consequences of housing policy and practice incompatibility, as well as factors contributing to recipient dissatisfaction and the housing backlog. Finally, based on the finding, a proposed framework for improving the supply of subsidised housing in South Africa has been developed. The methodology for this study adopted a post-positivist philosophy, embracing a quantitative approach using questionnaires, which incorporated mainly five-point Likert type scale, but also multiple-choice questions, as instruments for data collection. Three surveys were conducted, starting with a pilot study and followed by a primary study, during which a total of 2 884 potential participants within the construction sector across South Africa were randomly sampled and solicited to participate, of which 284 responded. The respondents consisted of four groups: general contractors (76); government housing officials (34); built environment professionals (137), and built environment suppliers (37). An electronic questionnaire was sent by email to all potential participants and allowed four weeks to complete the survey. Furthermore, a housing recipient survey was conducted among 100 randomly selected recipients of government subsidised housing in the Nelson Mandela Metropolitan area, by means of a structured interview using a paper based questionnaire, over a period of two weeks. The primary outcome measures used for this study were the ranked mean scores for mainly descriptive analysis and the Chi-square test, the 𝑡-test, Cohan’s d test, ANOVA and Scheffé test, using Cronbach's alpha as a measure of internal consistency of scale and validity, for inferential analyses and hypotheses testing. Hypothesis testing was founded upon Government’s worldview that its policies will not influence the operations of the construction sector relative to housing construction, and therefore tested respondents’ perspectives with respect to the impact that government policies have in terms of contractor operations and contractor success, as well as its contribution towards the housing backlog, substandard housing, recipient dissatisfaction and corruption. The following results were obtained by means of the hypothesis testing:Government housing procurement policies are inappropriate for application in the government subsidised housing sector. Respondents therefore disagree with the notion that government policy and practices do not impact contractor operations and contractor success, and thus the supply of houses; The application of government housing procurement policies leads to inadequate quality. Respondents therefore disagree with the notion that government preferential procurement policies do not impact quality; Government’s housing procurement policies inappropriately target emerging contractors. Respondents therefore disagree with the notion that Government’s targeting of emerging contractors does not impact housing supply; Government has inadequate capacity to address subsidised housing construction sector requirements in terms of housing projects. Respondents therefore disagree with the notion that Government has the capacity to address subsidised housing construction sector requirements in the supply of housing, and Government subsidised houses do not meet recipients’ expectations. Respondents therefore disagree with the notion that government subsidised houses do meet recipients’ expectations. It thus became apparent that housing supply is mostly inhibited by Government’s housing procurement policy, contributing to various factors, such as quality capability, contractor capability, systemic and administrative capacity, and resulting in recipient dissatisfaction. Using Pearson’s product moment correlation, a framework model was developed to illustrate the process flow, which revealed definitive statistical and practical relationships between these factors, and indeed reflects complex relationships between factors inhibiting supply and resulting in recipient dissatisfaction. To find an appropriate framework model for the purpose of improving housing supply, various sources were consulted. Based on the research question, together with the aims and objectives for this study, as well as the realisation that the problems associated with housing supply relate to the project management of the construction phase, which requires interventions for improving supply, it was decided that a results framework would be the most appropriate for this purpose. The proposed framework is therefore a graphical depiction of how the research process may be used to identify problems in the government subsidised housing sector, questioning how these may be resolved, setting strategies to improve the situation, evolving hypotheses and testing these hypotheses to establish the critical factors to be considered in the process of resolving the problem in the housing sector, by means of implementation and feedback.
- Full Text:
- Date Issued: 2017
Influence of the macro-economic environment on the construction sector's contribution to the South African economy, 1984 to 2011
- Authors: Babalola, Adewumi Joseph
- Date: 2016
- Subjects: Construction industry -- Economic aspects Economic development Environmental economics
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/5618 , vital:20916
- Description: The construction sector serves as the engine of growth to the South Africa economy because of its catalytic role in the growth and development of the country. This study focuses mainly on the influence of the macro-economic environment on the contribution of the private sector to construction in the South Africa economy from 1984 to 2011. Government construction work is considered to be an injection into the economy; in this regard, state construction is regarded as public investment in the economy; and therefore, it is anti-cyclic (Keynes, 1936). The aim of this study has been to develop an econometric model for predicting the influence of the macroeconomic environment on the contribution of the private sector to the construction sector in the South Africa economy. The research design adopted in this study was an “ex-post facto” type, otherwise known as a causal-comparative design. The data were extracted from the published sources of the South African National Statistics, namely SARB, Stats SA and Quantec SA. The estimation technique used in this study was the ARDL model using quarterly data from 1984 to 2011. This is because in the construction sector, the influence of the independent variables is always felt over time – rather than all at once. The results of this study show that there is a long run causal relationship between inflation rate, interest rate, real exchange rate, GDP and gdp in the construction sector. The descriptive statistical analysis shows that there is a negative relationship between variables inflation rate and interest rate and the private sector spending in construction. However, economic growth as well as growth in the construction sector has a positive relationship with the private sector spending in construction. Likewise, the real exchange rate and labour productivity in construction have a negative relationship with the private sector’s spending in construction and they are statistically insignificant. The variance decomposition analysis show that the private sector spending in construction explains about 75 per cent of it variations, followed by inflation rate that explains 21 per cent on the average; while the remaining variations, comprising about 4 per cent, were shared among the other independent variables, such as GDP, GDP in construction, the interest rate and the real exchange rate. It was discovered that only the inflation rate does Granger-cause the private sector spending in construction. From the finding it can be concluded that inflation rate is a significant explanatory variable in explaining the variation in the dependent variable during period under review. Policy recommendations are as follows: firstly, the monetary authorities in South Africa should embark on sound policies that would bring about low prices of the construction materials. This would ensure growth and development in the construction sector; secondly, a stimulating development plan that would encourage private sector investment in properties and infrastructural development must be instituted; thirdly, an alternative policy to the present inflation targeting is recommended that would bring about low inflation, high growth, low unemployment and stable exchange rate; fourthly, the present policy on interest rate must be reviewed to allow for more participation in construction projects by the private sectors of the economy; fifthly, due to the fact that fluctuation in the crude oil prices in the international market is one of the major factors causing high inflation rate in South Africa, government must source local alternative products that would bring down prices of construction materials.
- Full Text:
- Date Issued: 2016
- Authors: Babalola, Adewumi Joseph
- Date: 2016
- Subjects: Construction industry -- Economic aspects Economic development Environmental economics
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/5618 , vital:20916
- Description: The construction sector serves as the engine of growth to the South Africa economy because of its catalytic role in the growth and development of the country. This study focuses mainly on the influence of the macro-economic environment on the contribution of the private sector to construction in the South Africa economy from 1984 to 2011. Government construction work is considered to be an injection into the economy; in this regard, state construction is regarded as public investment in the economy; and therefore, it is anti-cyclic (Keynes, 1936). The aim of this study has been to develop an econometric model for predicting the influence of the macroeconomic environment on the contribution of the private sector to the construction sector in the South Africa economy. The research design adopted in this study was an “ex-post facto” type, otherwise known as a causal-comparative design. The data were extracted from the published sources of the South African National Statistics, namely SARB, Stats SA and Quantec SA. The estimation technique used in this study was the ARDL model using quarterly data from 1984 to 2011. This is because in the construction sector, the influence of the independent variables is always felt over time – rather than all at once. The results of this study show that there is a long run causal relationship between inflation rate, interest rate, real exchange rate, GDP and gdp in the construction sector. The descriptive statistical analysis shows that there is a negative relationship between variables inflation rate and interest rate and the private sector spending in construction. However, economic growth as well as growth in the construction sector has a positive relationship with the private sector spending in construction. Likewise, the real exchange rate and labour productivity in construction have a negative relationship with the private sector’s spending in construction and they are statistically insignificant. The variance decomposition analysis show that the private sector spending in construction explains about 75 per cent of it variations, followed by inflation rate that explains 21 per cent on the average; while the remaining variations, comprising about 4 per cent, were shared among the other independent variables, such as GDP, GDP in construction, the interest rate and the real exchange rate. It was discovered that only the inflation rate does Granger-cause the private sector spending in construction. From the finding it can be concluded that inflation rate is a significant explanatory variable in explaining the variation in the dependent variable during period under review. Policy recommendations are as follows: firstly, the monetary authorities in South Africa should embark on sound policies that would bring about low prices of the construction materials. This would ensure growth and development in the construction sector; secondly, a stimulating development plan that would encourage private sector investment in properties and infrastructural development must be instituted; thirdly, an alternative policy to the present inflation targeting is recommended that would bring about low inflation, high growth, low unemployment and stable exchange rate; fourthly, the present policy on interest rate must be reviewed to allow for more participation in construction projects by the private sectors of the economy; fifthly, due to the fact that fluctuation in the crude oil prices in the international market is one of the major factors causing high inflation rate in South Africa, government must source local alternative products that would bring down prices of construction materials.
- Full Text:
- Date Issued: 2016
Influences on construction project delivery time
- Authors: Olatunji, Aiyetan Ayodeji
- Date: 2010
- Subjects: Construction industry -- South Africa -- Management , Project management -- South Africa , Construction industry -- Economic aspects -- South Africa , Construction industry -- Technological innovations -- South Africa , Construction industry -- Labor productivity -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9681 , http://hdl.handle.net/10948/1548 , Construction industry -- South Africa -- Management , Project management -- South Africa , Construction industry -- Economic aspects -- South Africa , Construction industry -- Technological innovations -- South Africa , Construction industry -- Labor productivity -- South Africa
- Description: Construction delays are a global phenomenon. Factors causing construction delays in construction projects differ from country to country, due to different prevailing conditions. The prevailing conditions that could exert an influence on project delivery time are: political, economic, and physical factors as well as level of technological development; management style, and construction techniques. The construction industry is a major player in the economy, generating both employment and wealth. However, many projects experience extensive delays and thereby exceed initial time and cost estimates. This study aims at determining the causes of delays in project delivery in South Africa; evolving interventions, and developing a model for the delivery of projects on time. Inferential and linear regression statistical tools were used in the analysis of data for the study. The sample population consists of architects, builders, quantity surveyors, structural engineers, and clients, and the metropolitan cities of five provinces constituted the geographical delimitation of the study. The provinces are: Eastern Cape; Free State; Gauteng; KwaZulu-Natal, and Western Cape. The metropolitan cities are: Bloemfontein; Cape Town; Durban; Johannesburg, and Port Elizabeth. Findings which negatively influence project delivery time in South Africa include the following: lack of adequate planning; management style; the lack of constructability reviews of designs; inadequate motivation of workers; economic policies; lack of prompt payment to contractors, and quality of management during design and construction. Recommendations include: (1) The introduction of the following courses in built environment tertiary education � quality management competences; operational planning; design management, and generic management; (2) pre-qualification of suppliers; (3) inclusion of the following in tender documentation � human resource schedule; plant and equipment schedule; quality assurance plan, and work schedule; (4) appointment of materials specialists on a large projects; (5) the model developed should be adopted for use in the South African construction industry for the delivery of projects on time, and (6) the linear regression equation: Y = 13.1159 + 1.1341x or 35.3 percent addition on time for the estimation of project delivery time.
- Full Text:
- Date Issued: 2010
- Authors: Olatunji, Aiyetan Ayodeji
- Date: 2010
- Subjects: Construction industry -- South Africa -- Management , Project management -- South Africa , Construction industry -- Economic aspects -- South Africa , Construction industry -- Technological innovations -- South Africa , Construction industry -- Labor productivity -- South Africa
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9681 , http://hdl.handle.net/10948/1548 , Construction industry -- South Africa -- Management , Project management -- South Africa , Construction industry -- Economic aspects -- South Africa , Construction industry -- Technological innovations -- South Africa , Construction industry -- Labor productivity -- South Africa
- Description: Construction delays are a global phenomenon. Factors causing construction delays in construction projects differ from country to country, due to different prevailing conditions. The prevailing conditions that could exert an influence on project delivery time are: political, economic, and physical factors as well as level of technological development; management style, and construction techniques. The construction industry is a major player in the economy, generating both employment and wealth. However, many projects experience extensive delays and thereby exceed initial time and cost estimates. This study aims at determining the causes of delays in project delivery in South Africa; evolving interventions, and developing a model for the delivery of projects on time. Inferential and linear regression statistical tools were used in the analysis of data for the study. The sample population consists of architects, builders, quantity surveyors, structural engineers, and clients, and the metropolitan cities of five provinces constituted the geographical delimitation of the study. The provinces are: Eastern Cape; Free State; Gauteng; KwaZulu-Natal, and Western Cape. The metropolitan cities are: Bloemfontein; Cape Town; Durban; Johannesburg, and Port Elizabeth. Findings which negatively influence project delivery time in South Africa include the following: lack of adequate planning; management style; the lack of constructability reviews of designs; inadequate motivation of workers; economic policies; lack of prompt payment to contractors, and quality of management during design and construction. Recommendations include: (1) The introduction of the following courses in built environment tertiary education � quality management competences; operational planning; design management, and generic management; (2) pre-qualification of suppliers; (3) inclusion of the following in tender documentation � human resource schedule; plant and equipment schedule; quality assurance plan, and work schedule; (4) appointment of materials specialists on a large projects; (5) the model developed should be adopted for use in the South African construction industry for the delivery of projects on time, and (6) the linear regression equation: Y = 13.1159 + 1.1341x or 35.3 percent addition on time for the estimation of project delivery time.
- Full Text:
- Date Issued: 2010
Management of material waste and cost overrun in the Nigerian construction industry
- Authors: Saidu, Ibrahim
- Date: 2016
- Subjects: Construction industry -- Materials management -- Nigeria , Construction industry -- Nigeria -- Management
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/3792 , vital:20463
- Description: While wastage of materials has become a serious problem requiring urgent attention in the Nigerian Construction Industry, cost overrun is a problem, which affects 90 percent of the completed projects in the world; the argument on how to reduce/eliminate cost overrun has been on-going for the past 70 years; as the on-site wastage of materials leads to increases in the final project cost. Studies from different parts of the world have shown that construction-material waste represents a relatively large percentage of the production costs. Consequently, as a result of low levels of awareness, the Nigerian construction industry pays little attention to the effects of generated material waste on cost overruns. Thus, this research aimed to investigate the relationship between material waste and cost overrun in the Nigerian construction industry. A comprehensive review of the related literature revealed that all material waste causes are related to cost overrun causes at both pre-contract and post-contract stages of a project; but not vice versa. The mixed method (quantitative and qualitative) approach that is rooted in the positivist paradigm was adopted for this study. Abuja, the federal capital territory of Nigeria was the selected geographical scope of this research, out of which thirty-one (31) construction projects were purposeful selected (projects to the value of 100 million Rand/1.6 billion Naira and above).The research instrument was an interview guide used in conjunction with a tick box. Other sources of data included field investigation (measurement of onsite material waste) and the collection of archival records from bills of quantities, project records, and specifications. Analyses of the findings lead to the conclusion that a relationship exists between material waste and cost overrun; at the pre-contract and at the post-contract stages of a project. The implication is that an increase in material wastage on-site leads to a corresponding increase in the amount of cost overrun, regardless of the percentage allowance for material waste in the process of bill preparation. The study also concluded that the average percentage contribution of material waste to project-cost overruns is four (4) percent. Material-waste sources, causes, and control measures were found to have significant effects (very high, high, medium, low, and very low), in causing or minimising cost overruns at both pre-contract and post-contract stages of projects. The research has developed a conceptual model for the management of material waste and cost overruns in the construction industry based on the results and informed by the theoretical framework. The research has also developed a mathematical model for quantifying the amount of material waste to be generated by a project; as well as a mathematical equation for the effective management of material waste and cost overrun for projects. The study has achieved its aim of establishing an understanding of the issues leading to the relationship between material waste and cost overruns, as well as their management in the Nigerian construction industry. The study recommends that the management of material waste and cost overrun should be revised, based on the findings of this research and included as part of the procurement process. The mathematical models for quantification of onsite material waste, and the mathematical equation for managing material waste and cost overruns developed in the study, could be usefully adopted to improve management of material waste and cost overrun in the Nigerian construction industry.
- Full Text:
- Date Issued: 2016
- Authors: Saidu, Ibrahim
- Date: 2016
- Subjects: Construction industry -- Materials management -- Nigeria , Construction industry -- Nigeria -- Management
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/3792 , vital:20463
- Description: While wastage of materials has become a serious problem requiring urgent attention in the Nigerian Construction Industry, cost overrun is a problem, which affects 90 percent of the completed projects in the world; the argument on how to reduce/eliminate cost overrun has been on-going for the past 70 years; as the on-site wastage of materials leads to increases in the final project cost. Studies from different parts of the world have shown that construction-material waste represents a relatively large percentage of the production costs. Consequently, as a result of low levels of awareness, the Nigerian construction industry pays little attention to the effects of generated material waste on cost overruns. Thus, this research aimed to investigate the relationship between material waste and cost overrun in the Nigerian construction industry. A comprehensive review of the related literature revealed that all material waste causes are related to cost overrun causes at both pre-contract and post-contract stages of a project; but not vice versa. The mixed method (quantitative and qualitative) approach that is rooted in the positivist paradigm was adopted for this study. Abuja, the federal capital territory of Nigeria was the selected geographical scope of this research, out of which thirty-one (31) construction projects were purposeful selected (projects to the value of 100 million Rand/1.6 billion Naira and above).The research instrument was an interview guide used in conjunction with a tick box. Other sources of data included field investigation (measurement of onsite material waste) and the collection of archival records from bills of quantities, project records, and specifications. Analyses of the findings lead to the conclusion that a relationship exists between material waste and cost overrun; at the pre-contract and at the post-contract stages of a project. The implication is that an increase in material wastage on-site leads to a corresponding increase in the amount of cost overrun, regardless of the percentage allowance for material waste in the process of bill preparation. The study also concluded that the average percentage contribution of material waste to project-cost overruns is four (4) percent. Material-waste sources, causes, and control measures were found to have significant effects (very high, high, medium, low, and very low), in causing or minimising cost overruns at both pre-contract and post-contract stages of projects. The research has developed a conceptual model for the management of material waste and cost overruns in the construction industry based on the results and informed by the theoretical framework. The research has also developed a mathematical model for quantifying the amount of material waste to be generated by a project; as well as a mathematical equation for the effective management of material waste and cost overrun for projects. The study has achieved its aim of establishing an understanding of the issues leading to the relationship between material waste and cost overruns, as well as their management in the Nigerian construction industry. The study recommends that the management of material waste and cost overrun should be revised, based on the findings of this research and included as part of the procurement process. The mathematical models for quantification of onsite material waste, and the mathematical equation for managing material waste and cost overruns developed in the study, could be usefully adopted to improve management of material waste and cost overrun in the Nigerian construction industry.
- Full Text:
- Date Issued: 2016