Biological generation of reactive alkaline species and their application in a sustainable bioprocess for the remediation of acid and metal contaminated wastewaters
- Authors: Van Hille, Robert Paul
- Date: 2002
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:21049 , http://hdl.handle.net/10962/6129
- Description: This project focused on the development of an integrated biological system for the treatment of acidic and metal-laden effluents, based on the sustainable biological generation of reactive alkaline species. Initial studies concentrated on the binding and accumulation of heavy metals by biomass of the cyanobacteria, Spirulina sp. Metal binding was rapid, with saturation reached in 30 minutes, and followed an affinity series of Pb > Cu > Zn >>Fe. The binding capacity of the Spirulina for each of the metals was relatively low when compared to a range of other biosorbents. The toxicity thresholds of the algae was determined for copper and zinc. These were low (10umoles/g) and as such, the algae were not suitable for application in a treatment system in which they came into direct contact with the toxic metals. The algae were able to increase the pH of the surrounding medium. This occurred as a result of the accumulation of inorganic carbon, from bicarbonate, as a response to low concentrations of carbon dioxide in the medium. The resulting release of a hydroxide ion into solution led to the increase in pH. The increase in pH was shown to be due to a reduction in acidity, rather than an increase in alkalinity. The enzyme carbonic anhydrase was shown to be pivotal in this system. Attempts to determine the enzyme activity directly were unsuccessful, due to the inherent inaccuracy of the assay system. An indirect method of determining enzyme activity, by measuring changes in the carbonate species equilibrium, was developed. Under optimal conditions Spirulina was able to reduce the acidity by an amount equivalent to the addition of 3670umoles NaOH g·' h·'. Predictive modelling showed that this enhanced the potential of the medium to effect metal precipitation. For the algal system to be sustainable, a readily available source of bicarbonate was needed. This was achieved by the oxidation of organic carbon, under sulphidogenic conditions, by a bacterial consortium isolated from the anaerobic component of a facultative pond. The consortium was shown to consist of sulphate reducing (most likely Desulvovibrio and Desulfotomaculum)and acetogenic bacteria. Sulphate removal rates of 500mg 1·' day·' and 135mg 1·' day·' were achieved in a 21 agitated and 281 upflow reactor respectively. The bicarbonate generation rate in the 281 reactor was calculated as 4033umoles 1·' day·', which proved sufficient to act as a feed for the algal system. Sparging the anaerobic digester overflow with air and nitrogen resulted in a reduction in the aqueous sulphide concentration. Using nitrogen, a 70% recovery of sulphide, as H2S gas, was achieved in 60 minutes, while with air, this dropped to 40%, due to the oxidation of the aqueous sulphide. The stripping ofH2S resulted in an increase in pH. The H2S gas was used for the selective precipitation of copper and lead in the integrated system. The dynamics of metal precipitation was investigated. For simple reactions, between individual IV metal and base species, it was possible to generate an accurate predictive model and confirm the precipitating species using wavelength dispersive X-ray spectroscopy (WDS). In more complex systems, where precipitation of the artificial acid mine drainage was examined, the predictive modelling and WDS could not accurately describe the system. The addition of aqueous sulphide to copper and iron resulted in the formation of metastable, amorphous precipitates, which remained in suspension. Ageing of the copper precipitate resulted in the evolution of a stable crystalline structure (covellite) and the aggregation and settling of the precipitate. In the case of iron, the amorphous precipitate underwent oxidation before a stable iron sulphide could evolve and the settled precipitate was an iron oxide or oxyhydroxide. The artificial acid mine drainage was treated with sulphide, hydroxide, anaerobic digester overflow and algal overflow. The best metal removal was achieved with the sulphide and hydroxide, while the algal overflow outperformed the anaerobic digester overflow. The precipitate generated by the addition of sulphide was the most compact, followed by the algal overflow, the anaerobic digester overflow and the hydroxide. Efficient precipitation of all the heavy metals, except manganese, was achieved using the algal overflow at an acidity to alkalinity ratio of 1 :2. This ratio was selected for use in the pilot system. The Spirulina based pilot system was effectively used to treat an effluent from the Black Mountain base metal mine. The necessity to maintain the algae in suspension and avoid biomass washout were practical considerations which counted against this system. The replacement of the Spirulina by Oscillatoria, which adhered to a solid support, overcame these problems. The integrated biological system was able to effectively treat an artificial acid mine drainage for 90 days, reducing the concentration of all metals, except manganese, to below the acceptable environmental risk levels. The treatment of the final effluent in a second anaerobic digester reduced the manganese concentration to 4.5uM and proved that the sulphate reducing bacteria could be cultivated on enriched, partially treated acid mine drainage. The integrated biological treatment system performed well, effectively treating an effluent modelled closely on the quality of the water being discharged from the East Rand Basin. The cost of such a system would be considerably less than a "high tech" physico-chemical system. This, coupled with the potential long term sustainability of a biological system, would make it a potentially attractive option for the treatment of future acid mine drainage discharges.
- Full Text:
- Date Issued: 2002
- Authors: Van Hille, Robert Paul
- Date: 2002
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:21049 , http://hdl.handle.net/10962/6129
- Description: This project focused on the development of an integrated biological system for the treatment of acidic and metal-laden effluents, based on the sustainable biological generation of reactive alkaline species. Initial studies concentrated on the binding and accumulation of heavy metals by biomass of the cyanobacteria, Spirulina sp. Metal binding was rapid, with saturation reached in 30 minutes, and followed an affinity series of Pb > Cu > Zn >>Fe. The binding capacity of the Spirulina for each of the metals was relatively low when compared to a range of other biosorbents. The toxicity thresholds of the algae was determined for copper and zinc. These were low (10umoles/g) and as such, the algae were not suitable for application in a treatment system in which they came into direct contact with the toxic metals. The algae were able to increase the pH of the surrounding medium. This occurred as a result of the accumulation of inorganic carbon, from bicarbonate, as a response to low concentrations of carbon dioxide in the medium. The resulting release of a hydroxide ion into solution led to the increase in pH. The increase in pH was shown to be due to a reduction in acidity, rather than an increase in alkalinity. The enzyme carbonic anhydrase was shown to be pivotal in this system. Attempts to determine the enzyme activity directly were unsuccessful, due to the inherent inaccuracy of the assay system. An indirect method of determining enzyme activity, by measuring changes in the carbonate species equilibrium, was developed. Under optimal conditions Spirulina was able to reduce the acidity by an amount equivalent to the addition of 3670umoles NaOH g·' h·'. Predictive modelling showed that this enhanced the potential of the medium to effect metal precipitation. For the algal system to be sustainable, a readily available source of bicarbonate was needed. This was achieved by the oxidation of organic carbon, under sulphidogenic conditions, by a bacterial consortium isolated from the anaerobic component of a facultative pond. The consortium was shown to consist of sulphate reducing (most likely Desulvovibrio and Desulfotomaculum)and acetogenic bacteria. Sulphate removal rates of 500mg 1·' day·' and 135mg 1·' day·' were achieved in a 21 agitated and 281 upflow reactor respectively. The bicarbonate generation rate in the 281 reactor was calculated as 4033umoles 1·' day·', which proved sufficient to act as a feed for the algal system. Sparging the anaerobic digester overflow with air and nitrogen resulted in a reduction in the aqueous sulphide concentration. Using nitrogen, a 70% recovery of sulphide, as H2S gas, was achieved in 60 minutes, while with air, this dropped to 40%, due to the oxidation of the aqueous sulphide. The stripping ofH2S resulted in an increase in pH. The H2S gas was used for the selective precipitation of copper and lead in the integrated system. The dynamics of metal precipitation was investigated. For simple reactions, between individual IV metal and base species, it was possible to generate an accurate predictive model and confirm the precipitating species using wavelength dispersive X-ray spectroscopy (WDS). In more complex systems, where precipitation of the artificial acid mine drainage was examined, the predictive modelling and WDS could not accurately describe the system. The addition of aqueous sulphide to copper and iron resulted in the formation of metastable, amorphous precipitates, which remained in suspension. Ageing of the copper precipitate resulted in the evolution of a stable crystalline structure (covellite) and the aggregation and settling of the precipitate. In the case of iron, the amorphous precipitate underwent oxidation before a stable iron sulphide could evolve and the settled precipitate was an iron oxide or oxyhydroxide. The artificial acid mine drainage was treated with sulphide, hydroxide, anaerobic digester overflow and algal overflow. The best metal removal was achieved with the sulphide and hydroxide, while the algal overflow outperformed the anaerobic digester overflow. The precipitate generated by the addition of sulphide was the most compact, followed by the algal overflow, the anaerobic digester overflow and the hydroxide. Efficient precipitation of all the heavy metals, except manganese, was achieved using the algal overflow at an acidity to alkalinity ratio of 1 :2. This ratio was selected for use in the pilot system. The Spirulina based pilot system was effectively used to treat an effluent from the Black Mountain base metal mine. The necessity to maintain the algae in suspension and avoid biomass washout were practical considerations which counted against this system. The replacement of the Spirulina by Oscillatoria, which adhered to a solid support, overcame these problems. The integrated biological system was able to effectively treat an artificial acid mine drainage for 90 days, reducing the concentration of all metals, except manganese, to below the acceptable environmental risk levels. The treatment of the final effluent in a second anaerobic digester reduced the manganese concentration to 4.5uM and proved that the sulphate reducing bacteria could be cultivated on enriched, partially treated acid mine drainage. The integrated biological treatment system performed well, effectively treating an effluent modelled closely on the quality of the water being discharged from the East Rand Basin. The cost of such a system would be considerably less than a "high tech" physico-chemical system. This, coupled with the potential long term sustainability of a biological system, would make it a potentially attractive option for the treatment of future acid mine drainage discharges.
- Full Text:
- Date Issued: 2002
The independent high rate algal pond as a unit operation in tertiary wastewater treatment
- Authors: Clark, Stewart James
- Date: 2002
- Subjects: Algae -- Biotechnology , Sewage -- Purification -- Biological treatment
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4092 , http://hdl.handle.net/10962/d1007805
- Description: The development of the High Rate Algal Pond (HRAP) as an independent tertiary treatment unit operation for phosphate and nitrate removal is reported. A novel Integrated Algal Ponding System (lAPS) design is proposed for nutrient removal from the effluents of both a conventional domestic sewage treatment plant and from an Advanced Integrated Wastewater Ponding System (AIWPS). The viability of an independently operated HRAP has been identified and termed the Independent High Rate Algal Pond (l-HRAP). A 500 m² pilot 1- HRAP was operated in such a way as to facilitate the precipitation of calcium phosphate, known to be controlled by pH (greater than 9.4) and resulting in final phosphate levels of less than 1 mg.L⁻¹ as P0₄-P. The incorporation of the I-HRAP into a denitrification process was also investigated. Continuously fed column reactors, utilising algal biomass as a carbon source, showed that the heterotrophic bacterial community dominant in the anaerobic algal sludge were denitrifying the nitrate in the feed. It was demonstrated that as the cultures were stressed (using increased nitrate concentrations, anaerobiosis and light starvation) total polysaccharide (TPS) concentrations increased, with a notable increase 111 the exopolysaccharide (EPS) fraction. These experiments corroborated the hypothesis that harvested microalgal biomass can be manipulated to produce, and release, exopolymeric substances under stress conditions, and which may serve as carbon source for denitrification. In both batch flask studies and in laboratory-scale reactor systems, harvested microalgal biomass from an HRAP was shown to produce exopolymeric substances under stress conditions. Initial high loading-rates of greater than 20 mg.L⁻¹ NO₃-N resulted in double the amount of exopolysaccharide production than in flasks with initial low loading-rates (less than 5 mg.L⁻¹ NO₃-N). Making use of an upflow anaerobic sludge blanket-type degrading-bed reactor, and an anaerobic, flooded trickle filter (ANTRIC) receiving HRAP effluent, the relationship between denitrification and the changes in polysaccharide content was investigated. This phenomenon has considerable beneficial implications in biological wastewater treatment systems where high nitrate concentration in the final effluent is a potential mitigating factor. Identification of the heterotrophic bacteria active in the denitrification process was attempted. This study presents a first report on the development and operation of the I-HRAP and has been followed by a technical-scale pilot plant evaluation of the process in the tertiary treatment of domestic wastewaters.
- Full Text:
- Date Issued: 2002
- Authors: Clark, Stewart James
- Date: 2002
- Subjects: Algae -- Biotechnology , Sewage -- Purification -- Biological treatment
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4092 , http://hdl.handle.net/10962/d1007805
- Description: The development of the High Rate Algal Pond (HRAP) as an independent tertiary treatment unit operation for phosphate and nitrate removal is reported. A novel Integrated Algal Ponding System (lAPS) design is proposed for nutrient removal from the effluents of both a conventional domestic sewage treatment plant and from an Advanced Integrated Wastewater Ponding System (AIWPS). The viability of an independently operated HRAP has been identified and termed the Independent High Rate Algal Pond (l-HRAP). A 500 m² pilot 1- HRAP was operated in such a way as to facilitate the precipitation of calcium phosphate, known to be controlled by pH (greater than 9.4) and resulting in final phosphate levels of less than 1 mg.L⁻¹ as P0₄-P. The incorporation of the I-HRAP into a denitrification process was also investigated. Continuously fed column reactors, utilising algal biomass as a carbon source, showed that the heterotrophic bacterial community dominant in the anaerobic algal sludge were denitrifying the nitrate in the feed. It was demonstrated that as the cultures were stressed (using increased nitrate concentrations, anaerobiosis and light starvation) total polysaccharide (TPS) concentrations increased, with a notable increase 111 the exopolysaccharide (EPS) fraction. These experiments corroborated the hypothesis that harvested microalgal biomass can be manipulated to produce, and release, exopolymeric substances under stress conditions, and which may serve as carbon source for denitrification. In both batch flask studies and in laboratory-scale reactor systems, harvested microalgal biomass from an HRAP was shown to produce exopolymeric substances under stress conditions. Initial high loading-rates of greater than 20 mg.L⁻¹ NO₃-N resulted in double the amount of exopolysaccharide production than in flasks with initial low loading-rates (less than 5 mg.L⁻¹ NO₃-N). Making use of an upflow anaerobic sludge blanket-type degrading-bed reactor, and an anaerobic, flooded trickle filter (ANTRIC) receiving HRAP effluent, the relationship between denitrification and the changes in polysaccharide content was investigated. This phenomenon has considerable beneficial implications in biological wastewater treatment systems where high nitrate concentration in the final effluent is a potential mitigating factor. Identification of the heterotrophic bacteria active in the denitrification process was attempted. This study presents a first report on the development and operation of the I-HRAP and has been followed by a technical-scale pilot plant evaluation of the process in the tertiary treatment of domestic wastewaters.
- Full Text:
- Date Issued: 2002
Thermophilic lignin degrading enzymes from actinomycetes for biotechnological applications
- Authors: Mhlanga, Chido Yvonne Lois
- Date: 2002 , 2013-05-16
- Subjects: Actinomycetales -- Biotechnology , Lignin
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4085 , http://hdl.handle.net/10962/d1007628 , Actinomycetales -- Biotechnology , Lignin
- Description: Phenolic residues which accumulate in the environment as a result of agro-industrial practices has resulted in the need to find and use Eco-Friendly techniques, rather than the traditional methods of burning or burying this kind of waste. Bioremediation and bioconversion are attractive alternatives using whole cell or enzyme-based systems. The aims of this project were to isolate and uses thermophilic Actinomycetes, which produce thermo-tolerant oxidoreductase enzymes, which can be used to bioconvert a model industrial phenolic waste commonly genersated in the wine-making industry of South Africa. Current research in bioconversion and bioremediation focuses on mesophilic microbes in that their enzymes can catalyse reactions at higher temperatures without affecting its activity and lower contamination levels. Three novel Actinomycete isolates were isolated (RU-A0l , RU-A03 and RU-A06) from a compost site and characterized using a combination of conventional identification techniques and 16S rDNA methodology to identity the three isolates. All three isolates belong to the Streptomyces clade. In addition, five known Actinomycetes were selected from an internation culture collection and also screened for oxidoreductase activity in comparision to the three novel isolates. Although the five isolates were selected based on their ability to produce oxidoreductase enzymes, unexpectedly, no activity was detected. Screening assays for peroxidase, polyphenol oxidase and laccase on RU-AO 1, RU-A03 and RU-A06, showed that all three isolated produced peroxidases and peroxidases but no laccase. Substrate specificity studies revealed that the most suitable substrates to determine peroxidase and polyphenol oxidase activity on these isolates were catechol for polyphenol oxidase, 2,4-dichlorophenol for peroxidases and veratryl alcohol for lignin peroxidases. Previous studies have indicated that peroxidases and polyphenol oxidases are produced in Actinomycetes during the primary stage of growth. This was the case with RU-AOI , RU-A03 and RU-A06. Growth rates were higher that other Actinomycetes, with maxImum biomass being reached at 36 hours for the isolates RU-AOI and RU-A06 and 48 hours for isolate RUA03. pH studies showed that the three isolates were adaptable and could grow over a broad pH range. Catabolism studies of phenolic model compounds showed that the three isolates were capable of catabolizing the model phenolic compounds within a period of 24 hours. Further studies were carried out to determine the effect of these microbes and their enzymes in whole cell and enzyme-based systems on a model phenolic waste, graoe waste consisting of compressed grape skins, pips and stalks. Whole cell studies showed that the isolates were capable of bioconverting the waste at a maximum concentration of 30% grape waste (vol:vol). Peroxidase and polyphenol oxidase activity increased indicating induction of these enzymes in the presence of phenolic compounds, with a maximum increase of up to 15.9 fold increase in extracellular lignin peroxidase activity in RU-AO1. HPLC and phenolic determination assays indicated that bioconversion of the phenolic grape waste had occurred in the presence of the three isolates. Attempts were made to isolate and identify a peroxidase or phenol oxidase gene from one the isolates. As bacteria, Actinomycetes are amendable to gene manipulation making them suitable candidates for methods such as site directed evolution in comparison to fungi. Two clones were selected for sequencing based on positive activity results when assayed for peroxidase activity. However the resultant sequences did not identify a functional gene sequence. Southern Blotting was then carried out to determine the nature of the peroxidase gene. Previous studies have been focused on the catalase-peroxidase gene (CalC gene) found Actinomycetes and other bacteria. A probe was developed from the CalC gene. No hybridization occurred with any of the enzyme restricted DNA from the three isolates. The implications of these results are that the peroxidase genets in the three isolates are in fact lignin peroxidase in nature. This project has the potential in the bioconversion of phenolic wastes and is the first description of the use of thermophilic Actinomycetes in the bioconversion of an industrial phenolic waste.
- Full Text:
- Date Issued: 2002
- Authors: Mhlanga, Chido Yvonne Lois
- Date: 2002 , 2013-05-16
- Subjects: Actinomycetales -- Biotechnology , Lignin
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4085 , http://hdl.handle.net/10962/d1007628 , Actinomycetales -- Biotechnology , Lignin
- Description: Phenolic residues which accumulate in the environment as a result of agro-industrial practices has resulted in the need to find and use Eco-Friendly techniques, rather than the traditional methods of burning or burying this kind of waste. Bioremediation and bioconversion are attractive alternatives using whole cell or enzyme-based systems. The aims of this project were to isolate and uses thermophilic Actinomycetes, which produce thermo-tolerant oxidoreductase enzymes, which can be used to bioconvert a model industrial phenolic waste commonly genersated in the wine-making industry of South Africa. Current research in bioconversion and bioremediation focuses on mesophilic microbes in that their enzymes can catalyse reactions at higher temperatures without affecting its activity and lower contamination levels. Three novel Actinomycete isolates were isolated (RU-A0l , RU-A03 and RU-A06) from a compost site and characterized using a combination of conventional identification techniques and 16S rDNA methodology to identity the three isolates. All three isolates belong to the Streptomyces clade. In addition, five known Actinomycetes were selected from an internation culture collection and also screened for oxidoreductase activity in comparision to the three novel isolates. Although the five isolates were selected based on their ability to produce oxidoreductase enzymes, unexpectedly, no activity was detected. Screening assays for peroxidase, polyphenol oxidase and laccase on RU-AO 1, RU-A03 and RU-A06, showed that all three isolated produced peroxidases and peroxidases but no laccase. Substrate specificity studies revealed that the most suitable substrates to determine peroxidase and polyphenol oxidase activity on these isolates were catechol for polyphenol oxidase, 2,4-dichlorophenol for peroxidases and veratryl alcohol for lignin peroxidases. Previous studies have indicated that peroxidases and polyphenol oxidases are produced in Actinomycetes during the primary stage of growth. This was the case with RU-AOI , RU-A03 and RU-A06. Growth rates were higher that other Actinomycetes, with maxImum biomass being reached at 36 hours for the isolates RU-AOI and RU-A06 and 48 hours for isolate RUA03. pH studies showed that the three isolates were adaptable and could grow over a broad pH range. Catabolism studies of phenolic model compounds showed that the three isolates were capable of catabolizing the model phenolic compounds within a period of 24 hours. Further studies were carried out to determine the effect of these microbes and their enzymes in whole cell and enzyme-based systems on a model phenolic waste, graoe waste consisting of compressed grape skins, pips and stalks. Whole cell studies showed that the isolates were capable of bioconverting the waste at a maximum concentration of 30% grape waste (vol:vol). Peroxidase and polyphenol oxidase activity increased indicating induction of these enzymes in the presence of phenolic compounds, with a maximum increase of up to 15.9 fold increase in extracellular lignin peroxidase activity in RU-AO1. HPLC and phenolic determination assays indicated that bioconversion of the phenolic grape waste had occurred in the presence of the three isolates. Attempts were made to isolate and identify a peroxidase or phenol oxidase gene from one the isolates. As bacteria, Actinomycetes are amendable to gene manipulation making them suitable candidates for methods such as site directed evolution in comparison to fungi. Two clones were selected for sequencing based on positive activity results when assayed for peroxidase activity. However the resultant sequences did not identify a functional gene sequence. Southern Blotting was then carried out to determine the nature of the peroxidase gene. Previous studies have been focused on the catalase-peroxidase gene (CalC gene) found Actinomycetes and other bacteria. A probe was developed from the CalC gene. No hybridization occurred with any of the enzyme restricted DNA from the three isolates. The implications of these results are that the peroxidase genets in the three isolates are in fact lignin peroxidase in nature. This project has the potential in the bioconversion of phenolic wastes and is the first description of the use of thermophilic Actinomycetes in the bioconversion of an industrial phenolic waste.
- Full Text:
- Date Issued: 2002
- «
- ‹
- 1
- ›
- »