Soil erosion in South Africa
- Authors: Kitto, P H
- Date: 1936
- Subjects: Uncatalogued
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/193679 , vital:45385
- Description: The development of Soil Science in western Europe, eastern North America, and later in other countries, which, in its modern form only started about the beginning of the last century, might be said to mark the first step in the consideration of Soil Erosion from a scientific aspect, although it was some time before scientists began to concentrate on and study the problem as one which demanded a detailed investigation. Empirically, erosion has been noted and, where the value of the land warranted it, practical methods adopted for its control, in many cases with no small measure of success, for centuries, but the methods adopted were localised to small regions, and the major destruction went on unchecked. The seriousness of this destruction was usually not realised until too late, and striking examples exist of the complete desiccation resulting from this neglect. Those of China, Arabia, Mesopotamia and other countries have often been quoted, and need not be described again here. , Thesis (MSc) -- Faculty of Science, Chemistry, 1936
- Full Text:
- Date Issued: 1936
- Authors: Kitto, P H
- Date: 1936
- Subjects: Uncatalogued
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/193679 , vital:45385
- Description: The development of Soil Science in western Europe, eastern North America, and later in other countries, which, in its modern form only started about the beginning of the last century, might be said to mark the first step in the consideration of Soil Erosion from a scientific aspect, although it was some time before scientists began to concentrate on and study the problem as one which demanded a detailed investigation. Empirically, erosion has been noted and, where the value of the land warranted it, practical methods adopted for its control, in many cases with no small measure of success, for centuries, but the methods adopted were localised to small regions, and the major destruction went on unchecked. The seriousness of this destruction was usually not realised until too late, and striking examples exist of the complete desiccation resulting from this neglect. Those of China, Arabia, Mesopotamia and other countries have often been quoted, and need not be described again here. , Thesis (MSc) -- Faculty of Science, Chemistry, 1936
- Full Text:
- Date Issued: 1936
The chemistry of the wattle tannins
- Authors: Roux, David Gerhardus
- Date: 1953
- Subjects: Tannin plants , Tannins , Wattles (Plants)
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: vital:4492 , http://hdl.handle.net/10962/d1013098
- Description: Four species of acacia of Auatralian origin are associated with the wattle industry in South Africa. Black wattle, Acacia mollissima willd., is the most important of these and is today almost exclusively cultivated. The tree grows successfully only in a limited area of rich soil and high rainfall and is easily affected by adverse conditions caused by insect pests, frost damage and drought. Expansion of the area under cultivation is therefore, not feasible, although the world demand for vegetable extracts far exceeds the available supply. The remaining species such as green (Acacia decurrrens willd.) and silver wattles (Acacia dealbata Link.) possess many desirable characteristics which resist such adverse factors. Their barks, however, give reddish extracts, which are considered unsuitable for tannery usage because of the red colour they impart to the leather. Hybridisation studies, involving the crossing of green and silver wattle with the black, and aimed at produc1ng progenies containing many of the desirable characterlstics of the parent plants, are thus a natural result and have been in progress for a considerable period. Summary, p. i.
- Full Text:
- Date Issued: 1953
- Authors: Roux, David Gerhardus
- Date: 1953
- Subjects: Tannin plants , Tannins , Wattles (Plants)
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: vital:4492 , http://hdl.handle.net/10962/d1013098
- Description: Four species of acacia of Auatralian origin are associated with the wattle industry in South Africa. Black wattle, Acacia mollissima willd., is the most important of these and is today almost exclusively cultivated. The tree grows successfully only in a limited area of rich soil and high rainfall and is easily affected by adverse conditions caused by insect pests, frost damage and drought. Expansion of the area under cultivation is therefore, not feasible, although the world demand for vegetable extracts far exceeds the available supply. The remaining species such as green (Acacia decurrrens willd.) and silver wattles (Acacia dealbata Link.) possess many desirable characteristics which resist such adverse factors. Their barks, however, give reddish extracts, which are considered unsuitable for tannery usage because of the red colour they impart to the leather. Hybridisation studies, involving the crossing of green and silver wattle with the black, and aimed at produc1ng progenies containing many of the desirable characterlstics of the parent plants, are thus a natural result and have been in progress for a considerable period. Summary, p. i.
- Full Text:
- Date Issued: 1953
Applications of camphor-derived chiral auxiliaries in the asymmetric synthesis of α-amino acids and other systems
- Authors: Matjila, Joseph Moemise
- Date: 1998-04
- Subjects: Uncatalogued
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/191501 , vital:45106
- Description: A viable synthetic route to camphor-derived imino lactones as precursors for the asymmetric synthesis of a-amino acids has been established. Several synthetic strategies have been investigated and the required regioisomeric imino lactones were finally obtained via the step-wise condensation of JV-(carbobenzyloxy)glycine with the a-ketols, 3-exo-hydroxycamphor and 2-exo- hydroxy-3-bomanone. Enolates of the camphor imino lactones, generated using potassium tert- butoxide, were reacted with a range of alkyl halides. Dialkylation was observed using the 2-imino lactone, while the regioisomeric 3-imino lactone derivative gave monoalkylated products with diastereoselectivities, shown by NMR spectroscopy, to range from 43% d.e. for the methylated product to > 99% d.e. for larger alkyl groups. The expected preference for endo-alkylation is supported by NMR (chemical shift, coupling constant and NOE) data and was confirmed by acidic hydrolysis of the pentylated 3-imino lactone to afford the known acid. Computer modelling, with the software package HYPERCHEM®, was used to explore the conformational properties of the alkylated products and their enolate precursors. Exploratory work on the enantiomeric beneficiation of racemic amino acids, using alkylated imino lactone derivatives, revealed preferential exo-protonation of the enolate intermediates. Asymmetric Baylis-Hillman reactions between a novel camphor-derived acrylic ester and a range of aldehydes afforded the corresponding 2-(hydroxyalkyl)acrylates in up to 59% d.e., the observed stereoselectivities being sensitive to both steric and electronic factors. Attempts to prepare imino lactone derivatives from ketopinic acid, although unsuccessful, led to the isolation of two novel W-(carbobenzyloxy)glycinates, whose structures were established by 1- and 2-D NMR spectroscopy. Attempts to prepare "BINAP" analogues from dibomyl ether's also proved unsuccessful, but the investigation led to the discovery of a third, novel dibomyl ether. , Thesis (PhD) -- Faculty of Science, Chemistry, 1998
- Full Text:
- Date Issued: 1998-04
- Authors: Matjila, Joseph Moemise
- Date: 1998-04
- Subjects: Uncatalogued
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/191501 , vital:45106
- Description: A viable synthetic route to camphor-derived imino lactones as precursors for the asymmetric synthesis of a-amino acids has been established. Several synthetic strategies have been investigated and the required regioisomeric imino lactones were finally obtained via the step-wise condensation of JV-(carbobenzyloxy)glycine with the a-ketols, 3-exo-hydroxycamphor and 2-exo- hydroxy-3-bomanone. Enolates of the camphor imino lactones, generated using potassium tert- butoxide, were reacted with a range of alkyl halides. Dialkylation was observed using the 2-imino lactone, while the regioisomeric 3-imino lactone derivative gave monoalkylated products with diastereoselectivities, shown by NMR spectroscopy, to range from 43% d.e. for the methylated product to > 99% d.e. for larger alkyl groups. The expected preference for endo-alkylation is supported by NMR (chemical shift, coupling constant and NOE) data and was confirmed by acidic hydrolysis of the pentylated 3-imino lactone to afford the known acid. Computer modelling, with the software package HYPERCHEM®, was used to explore the conformational properties of the alkylated products and their enolate precursors. Exploratory work on the enantiomeric beneficiation of racemic amino acids, using alkylated imino lactone derivatives, revealed preferential exo-protonation of the enolate intermediates. Asymmetric Baylis-Hillman reactions between a novel camphor-derived acrylic ester and a range of aldehydes afforded the corresponding 2-(hydroxyalkyl)acrylates in up to 59% d.e., the observed stereoselectivities being sensitive to both steric and electronic factors. Attempts to prepare imino lactone derivatives from ketopinic acid, although unsuccessful, led to the isolation of two novel W-(carbobenzyloxy)glycinates, whose structures were established by 1- and 2-D NMR spectroscopy. Attempts to prepare "BINAP" analogues from dibomyl ether's also proved unsuccessful, but the investigation led to the discovery of a third, novel dibomyl ether. , Thesis (PhD) -- Faculty of Science, Chemistry, 1998
- Full Text:
- Date Issued: 1998-04
An electrospun nanofiber colorimetric probe for detection of Alkaline Phosphatase for diagnosis of liver toxicity
- Authors: Mohale, Mamello
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54532 , vital:26581
- Description: A novel electrospun nanofiber colorimetric probe for the detection of Alkaline Phosphatase (ALP) for diagnosis of liver toxicity was developed through electrospinning of a para nitrophenyl phosphate (pNPP) functionalised nylon polymer. The chemical stability of the enzyme substrate (pNPP) and its two products (para nitrophenol (pNP) and para nitrophenolate (pNPL)) was evaluated in biological (pH 7.4), acidic (pH 2) and alkaline (pH 9) pH, respectively. Enzyme kinetics models of Michaelis Menten (MM) and Lineweaver Burk (LB) were used to characterise free ALP. Solution and nanofiber assaying of free ALP and 10x diluted serum (spiked with ALP) was also carried out. The results demonstrated that pNPP and pNP were colourless while pNPL was yellow which indicated that all reagents were chemically stable. In addition, the chromophore of pNPL exhibited a strong molar extinction coefficient (ε) of 18,458 M-1 cm-1. LB plot being the most accurate compared to MM showed Vmax, Km and excess substrate concentration of 5.5 × 10-3 μmol/min-1, 0.025 mM and 0.25 mM respectively. Solution and nanofiber assaying of free ALP and serum confirmed a direct proportional correlation between the pNPL yellow colour intensity and enzyme activity up to 858 IU/L and 820 IU/L respectively. The dipping of the nanofiber layer into solution showed that the leaching rate of pNPP was extremely high at 1.37 × 10-3 A/min-1 as was observed after only the first 0.25 min interval. However, this was not of great concern since it was also observed that administration of the sample (20 μL) by a dropwise method minimised leaching compared to dipping. The preliminary findings on the effect of temperature on the chemical stability of pNPP indicated that it was stable below temperatures of 40°C while it hydrolysed at 80°C. Therefore a sensitive, rapid and simple colorimetric probe for the detection of ALP was developed. The probe exhibited characteristics that make it suitable to be incorporated into point of care colorimetric liver toxicity diagnostic devices for applications in resource poor settings and telemedicine.
- Full Text:
- Date Issued: 2014
- Authors: Mohale, Mamello
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54532 , vital:26581
- Description: A novel electrospun nanofiber colorimetric probe for the detection of Alkaline Phosphatase (ALP) for diagnosis of liver toxicity was developed through electrospinning of a para nitrophenyl phosphate (pNPP) functionalised nylon polymer. The chemical stability of the enzyme substrate (pNPP) and its two products (para nitrophenol (pNP) and para nitrophenolate (pNPL)) was evaluated in biological (pH 7.4), acidic (pH 2) and alkaline (pH 9) pH, respectively. Enzyme kinetics models of Michaelis Menten (MM) and Lineweaver Burk (LB) were used to characterise free ALP. Solution and nanofiber assaying of free ALP and 10x diluted serum (spiked with ALP) was also carried out. The results demonstrated that pNPP and pNP were colourless while pNPL was yellow which indicated that all reagents were chemically stable. In addition, the chromophore of pNPL exhibited a strong molar extinction coefficient (ε) of 18,458 M-1 cm-1. LB plot being the most accurate compared to MM showed Vmax, Km and excess substrate concentration of 5.5 × 10-3 μmol/min-1, 0.025 mM and 0.25 mM respectively. Solution and nanofiber assaying of free ALP and serum confirmed a direct proportional correlation between the pNPL yellow colour intensity and enzyme activity up to 858 IU/L and 820 IU/L respectively. The dipping of the nanofiber layer into solution showed that the leaching rate of pNPP was extremely high at 1.37 × 10-3 A/min-1 as was observed after only the first 0.25 min interval. However, this was not of great concern since it was also observed that administration of the sample (20 μL) by a dropwise method minimised leaching compared to dipping. The preliminary findings on the effect of temperature on the chemical stability of pNPP indicated that it was stable below temperatures of 40°C while it hydrolysed at 80°C. Therefore a sensitive, rapid and simple colorimetric probe for the detection of ALP was developed. The probe exhibited characteristics that make it suitable to be incorporated into point of care colorimetric liver toxicity diagnostic devices for applications in resource poor settings and telemedicine.
- Full Text:
- Date Issued: 2014
Characterization and application of phthalocyanine-magnetic nanoparticle conjugates anchored to electrospun polyamide nanofibers
- Authors: Ledwaba, Mpho
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54610 , vital:26593
- Description: This work presents the syntheses, photophysical and photochemical characterization of zinc tetracarboxyphenoxy phthalocyanine (ZnTCPPc, 3) and its gadolinium oxide nanoparticle conjugate (4). By means of spectroscopic and microscopic characterization, the conjugation of the ZnTCPPc to the silica coated gadolinium oxide nanoparticles (Si-Gd2O3 NPs, 2) through an amide bond was confirmed. The thermal stability, morphology, nanoparticle sizes and their conjugates with the Pc were studied using ThermoGravimetric Analysis (TGA), Fourier Transform Infrared spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and powder X-ray diffractometry (XRD). Conjugation of ZnTCPPc to the magnetic nanoparticles, proved to have a negligible effect on the photophysical parameters of the phthalocyanine, where a slight decrease in fluorescence and triplet quantum yields and lifetimes was observed. The singlet oxygen quantum yield, however, increased slightly upon conjugation, suggesting that the overall efficiency of the ZnTCPPc as a photosensitizer had improved. Physical mixing of the ZnTCPPc and the silica-coated gadolinium nanoparticles also showed an improvement in the singlet oxygen quantum yield and triplet lifetime, also showing an enhanced efficiency for the photosensitizer and therefore photocatalysis. ZnTCPPc (3) alone and the Pc-gadolinium oxide nanoparticle conjugate (4) were therefore electrospun into nanofibers to create a solid support. The fibers were characterized and their diameter sizes and composition was studied confirming the incorporation of the phthalocyanine and gadolinium oxide nanoparticle. Increased singlet oxygen generation resulted in increased Photodegradation of the environmental pollutant Orange G and the fibers were found to be more efficient as photocatalysts compared to the photosensitizer in solution. The nanomaterial may therefore be applied to the photodegradation of Orange G.
- Full Text:
- Date Issued: 2014
- Authors: Ledwaba, Mpho
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54610 , vital:26593
- Description: This work presents the syntheses, photophysical and photochemical characterization of zinc tetracarboxyphenoxy phthalocyanine (ZnTCPPc, 3) and its gadolinium oxide nanoparticle conjugate (4). By means of spectroscopic and microscopic characterization, the conjugation of the ZnTCPPc to the silica coated gadolinium oxide nanoparticles (Si-Gd2O3 NPs, 2) through an amide bond was confirmed. The thermal stability, morphology, nanoparticle sizes and their conjugates with the Pc were studied using ThermoGravimetric Analysis (TGA), Fourier Transform Infrared spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and powder X-ray diffractometry (XRD). Conjugation of ZnTCPPc to the magnetic nanoparticles, proved to have a negligible effect on the photophysical parameters of the phthalocyanine, where a slight decrease in fluorescence and triplet quantum yields and lifetimes was observed. The singlet oxygen quantum yield, however, increased slightly upon conjugation, suggesting that the overall efficiency of the ZnTCPPc as a photosensitizer had improved. Physical mixing of the ZnTCPPc and the silica-coated gadolinium nanoparticles also showed an improvement in the singlet oxygen quantum yield and triplet lifetime, also showing an enhanced efficiency for the photosensitizer and therefore photocatalysis. ZnTCPPc (3) alone and the Pc-gadolinium oxide nanoparticle conjugate (4) were therefore electrospun into nanofibers to create a solid support. The fibers were characterized and their diameter sizes and composition was studied confirming the incorporation of the phthalocyanine and gadolinium oxide nanoparticle. Increased singlet oxygen generation resulted in increased Photodegradation of the environmental pollutant Orange G and the fibers were found to be more efficient as photocatalysts compared to the photosensitizer in solution. The nanomaterial may therefore be applied to the photodegradation of Orange G.
- Full Text:
- Date Issued: 2014
Development of styrene based imprinted sorbents for selective clean-up of metalloporphyrins in organic media
- Authors: Awokoya, Kehinde Nurudeen
- Date: 2014
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/54521 , vital:26580
- Description: Most crude oils contain traces of vanadium and nickel complex with porphyrins (VTPP and NTPP) within their asphaltene fraction. Although these metals are only present in trace quantities, they have a significant and detrimental impact on the refining process by degrading the quality of intermediate and end products. Therefore, their selective removal is highly desirable. This thesis presents the development of nickel porphyrin, nickel vanadyl porphyrin imprinted nanofibers and vanadyl porphyrin imprinted polymer (MIP) particles for application as selective sorbents. Computational model based on the combination of molecular dynamics simulations and quantum mechanics was successfully applied to the styrene functional monomer selection. The particle was prepared by bulk polymerization and the nanofibers by a novel approach combining molecular imprinting and electrospinning technology. The morphologies, thermal stabilities and porosities of the imprinted sorbents were studied using SEM, TGA, and BET nitrogen gas adsorption. Chloroform was found to swell the polymer particles to a higher degree than methanol and acetonitrile. The adsorption characteristics of the imprinted sorbents best fitted with Freundlich isotherm model. The imprinted sorbents recorded high extraction efficiencies (EEs) of > 99 % in selectively extracting the metalloporphyrins. The impact of the template on the affinity of recognition for NTPP was evaluated. The results showed that the NTPP adsorption capacity increased as the molar ratio of NTPP to styrene was increased from 1:1 to 3:1. The optimal ratio of template to functional monomer which yielded the best specific affinity and highest recovery (99.9 %) was 3:1. The effects of trifluoroacetic acid (TFA), dichloromethane (DCM), dimethyl sulphoxide (DMSO), pentane (PEN) on electro-spinnability of the polymer solutions and the morphological appearance of the nanofibers were investigated. The imprinted nanofibers exhibited the same selectivity specialism for both NTPP and VTPP. A remarkable stability in relation to reusability was observed when imprinted nanofibers were used, as they could be reused nine times without incurring any significant loss in removal efficiency. The results were validated by analysing a certified reference material. The imprinted sorbents were therefore found to be selective sorbents that are well suited for handling trace metals in organic media.
- Full Text:
- Date Issued: 2014
- Authors: Awokoya, Kehinde Nurudeen
- Date: 2014
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/54521 , vital:26580
- Description: Most crude oils contain traces of vanadium and nickel complex with porphyrins (VTPP and NTPP) within their asphaltene fraction. Although these metals are only present in trace quantities, they have a significant and detrimental impact on the refining process by degrading the quality of intermediate and end products. Therefore, their selective removal is highly desirable. This thesis presents the development of nickel porphyrin, nickel vanadyl porphyrin imprinted nanofibers and vanadyl porphyrin imprinted polymer (MIP) particles for application as selective sorbents. Computational model based on the combination of molecular dynamics simulations and quantum mechanics was successfully applied to the styrene functional monomer selection. The particle was prepared by bulk polymerization and the nanofibers by a novel approach combining molecular imprinting and electrospinning technology. The morphologies, thermal stabilities and porosities of the imprinted sorbents were studied using SEM, TGA, and BET nitrogen gas adsorption. Chloroform was found to swell the polymer particles to a higher degree than methanol and acetonitrile. The adsorption characteristics of the imprinted sorbents best fitted with Freundlich isotherm model. The imprinted sorbents recorded high extraction efficiencies (EEs) of > 99 % in selectively extracting the metalloporphyrins. The impact of the template on the affinity of recognition for NTPP was evaluated. The results showed that the NTPP adsorption capacity increased as the molar ratio of NTPP to styrene was increased from 1:1 to 3:1. The optimal ratio of template to functional monomer which yielded the best specific affinity and highest recovery (99.9 %) was 3:1. The effects of trifluoroacetic acid (TFA), dichloromethane (DCM), dimethyl sulphoxide (DMSO), pentane (PEN) on electro-spinnability of the polymer solutions and the morphological appearance of the nanofibers were investigated. The imprinted nanofibers exhibited the same selectivity specialism for both NTPP and VTPP. A remarkable stability in relation to reusability was observed when imprinted nanofibers were used, as they could be reused nine times without incurring any significant loss in removal efficiency. The results were validated by analysing a certified reference material. The imprinted sorbents were therefore found to be selective sorbents that are well suited for handling trace metals in organic media.
- Full Text:
- Date Issued: 2014
Electrospun fiber based colorimetric probes for aspartate aminotransferase and I7ß-estradiol
- Authors: Pule, Bellah Oreeditse
- Date: 2014
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/54869 , vital:26623
- Description: Fabrication, characterization and application of electrospun polymer composite based colorimetric probes are presented in this thesis. The first part of the thesis involved the development of a protocol for in situ reduction of gold trication (Au³+) into metallic gold atoms with sodium borohydride. The prepared PS-Au NPs showed an SPR band at 542 nm. Furthermore the absorbance of the colloidal Au NPs in polystyrene exhibited a good linear correlation (r2 = 0.9934) to E2 concentration in the range 5 to 50 ppb. The lowest naked eye detection limit was found to be 0.5 ppb and could further be easily monitored by UV-vis spectrophotometer. Upon interaction with E2 Au NPs aggregated to give nanoparticle clusters, confirmed through TEM analysis. Different concentrations of Au NPs were found to have a significant effect on the conductivity of the PS-Au NPs solution. At low concentrations of Au NPs (0.002, 0.015 and 0.025% w/v) PS-Au NPs solution could be electrospun without clogging. The FE-SEM images showed a non-beaded morphology of PS-Au NPs composite fibers. Upon interaction of the colorimetric probe strips with various E2 concentrations it was observed that with increasing E2 concentrations (50 ng/ml to 1000 µg/ml) the colour of the probe changed gradually from white to shades of pink and eventually to shades of blue at higher E2 concentrations. The visible cut-off concentration was 100 ng/ml. The second component of the thesis focussed on the development of diazonium dye-nylon 6 colorimetric probe for aspartate aminotransferase. At optimal pH 7.4 the enzyme was stable, highly active and catalyzed a reaction that was susceptible to detailed kinetic analysis by continuous optical methods. The KM values for L-aspartate, a- ketoglutarate and oxaloacetate were 2.60, 0.59 and 0.066 mM, respectively. On the basis of these KM values the solid-state colorimetric probe was developed. A colour change occurred when an electrospun dye-N 6 probes were exposed to visibly detectable concentrations of oxaloacetate, an AST-catalyzed reaction product. While monitoring AST activity at 530 run, a linear relation was obtained between oxaloacetate concentrations ranging from 0.4 - 7.4 µg/ml. Naked eye detection limit of 2.4 µg/ml oxalaoacetate equivalence of 10 times the normal AST activity was attained. The colorimetric probe was in addition, tested against co-substrates aspartate, ketoglutarate and a variety of other compounds such as alanine, pryruvate, as well as glutamic, malaic and succinic acids known to interfere with AST activity. Each compound elicited a distinct and unambiguous colour change upon interaction with the colorimetric probe. Further X-ray powder diffraction (XRD), duNouy ring tensiometer, Brunauer- Emmett- Teller (BET) and energy dispersive X-ray spectroscopy (EDS/EDX) characterization confirmed composition and stability of the colorimetric probes. Colorimetric probes developed in this thesis are relatively cost effective, simple and "rugged" for measurement of analytes with visual detection without sample pretreatment in matrices, such as plasma and dairy effluents. The probes warrant further investigation as they have shown potential and offer a promising solid-state platform for both clinical diagnostics and environmental monitoring.
- Full Text:
- Date Issued: 2014
- Authors: Pule, Bellah Oreeditse
- Date: 2014
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/54869 , vital:26623
- Description: Fabrication, characterization and application of electrospun polymer composite based colorimetric probes are presented in this thesis. The first part of the thesis involved the development of a protocol for in situ reduction of gold trication (Au³+) into metallic gold atoms with sodium borohydride. The prepared PS-Au NPs showed an SPR band at 542 nm. Furthermore the absorbance of the colloidal Au NPs in polystyrene exhibited a good linear correlation (r2 = 0.9934) to E2 concentration in the range 5 to 50 ppb. The lowest naked eye detection limit was found to be 0.5 ppb and could further be easily monitored by UV-vis spectrophotometer. Upon interaction with E2 Au NPs aggregated to give nanoparticle clusters, confirmed through TEM analysis. Different concentrations of Au NPs were found to have a significant effect on the conductivity of the PS-Au NPs solution. At low concentrations of Au NPs (0.002, 0.015 and 0.025% w/v) PS-Au NPs solution could be electrospun without clogging. The FE-SEM images showed a non-beaded morphology of PS-Au NPs composite fibers. Upon interaction of the colorimetric probe strips with various E2 concentrations it was observed that with increasing E2 concentrations (50 ng/ml to 1000 µg/ml) the colour of the probe changed gradually from white to shades of pink and eventually to shades of blue at higher E2 concentrations. The visible cut-off concentration was 100 ng/ml. The second component of the thesis focussed on the development of diazonium dye-nylon 6 colorimetric probe for aspartate aminotransferase. At optimal pH 7.4 the enzyme was stable, highly active and catalyzed a reaction that was susceptible to detailed kinetic analysis by continuous optical methods. The KM values for L-aspartate, a- ketoglutarate and oxaloacetate were 2.60, 0.59 and 0.066 mM, respectively. On the basis of these KM values the solid-state colorimetric probe was developed. A colour change occurred when an electrospun dye-N 6 probes were exposed to visibly detectable concentrations of oxaloacetate, an AST-catalyzed reaction product. While monitoring AST activity at 530 run, a linear relation was obtained between oxaloacetate concentrations ranging from 0.4 - 7.4 µg/ml. Naked eye detection limit of 2.4 µg/ml oxalaoacetate equivalence of 10 times the normal AST activity was attained. The colorimetric probe was in addition, tested against co-substrates aspartate, ketoglutarate and a variety of other compounds such as alanine, pryruvate, as well as glutamic, malaic and succinic acids known to interfere with AST activity. Each compound elicited a distinct and unambiguous colour change upon interaction with the colorimetric probe. Further X-ray powder diffraction (XRD), duNouy ring tensiometer, Brunauer- Emmett- Teller (BET) and energy dispersive X-ray spectroscopy (EDS/EDX) characterization confirmed composition and stability of the colorimetric probes. Colorimetric probes developed in this thesis are relatively cost effective, simple and "rugged" for measurement of analytes with visual detection without sample pretreatment in matrices, such as plasma and dairy effluents. The probes warrant further investigation as they have shown potential and offer a promising solid-state platform for both clinical diagnostics and environmental monitoring.
- Full Text:
- Date Issued: 2014
Synthesis and characterization of NaYGdF4 upconversion nanoparticles and an investigation of their effects on the spectroscopic properties of two phthalocyanine dyes
- Authors: Taylor, Jessica Mary
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54621 , vital:26594
- Description: Sphere and star shaped NaYGdF4:Yb/Er(Tm) upconversion nanoparticles were successfully synthesized utilizing a methanol assisted thermal decomposition approach and their chemical, spectroscopic and fluorescence properties were fully characterized. In addition, their influence on the spectroscopic and fluorescence properties of two phthalocyanines (Pcs) (unsubstituted tetrathiophenoxy phthalocyanine (H2Pc) and aluminium octacarboxy phthalocyanine (Cl)AlOCPc) was investigated. Upconversion nanoparticles were found to produce characteristic upconversion fluorescence emissions in the blue, green, red and NIR regions and were also shown to possess paramagnetic properties. Simple mixing with an H2Pc in toluene was found to exert no change on the spectroscopic or fluorescence properties of the Pc while covalent conjugation to a (Cl)AlOCPc resulted in a large Q band blue shift accompanied by a decrease in fluorescence lifetimes in DMSO. The red light excitation mediated singlet oxygen generation of the H2Pc mixed with upconversion nanoparticles was investigated and singlet oxygen fluorescence lifetimes were found to decrease in the presence of the nanoparticles. Upconversion mediated singlet oxygen generation, by way of resonance energy transfer to the Pc, was also attempted using 972 nm excitation; however, no singlet oxygen was detected utilizing singlet oxygen NIR emission detection. Pending further work using alternative singlet oxygen detection methods, this suggests that while upconversion nanoparticles possess excellent fluorescent imaging capabilities, they are relatively inefficient in inducing singlet oxygen production simply when mixed with phthalocyanines. Despite this, by combining phthalocyanines and upconversion nanoparticles, we present a system capable of: multimodal imaging, using both upconversion and phthalocyanines emissions, singlet oxygen generation, via direct excitation of the phthalocyanine with red laser light, and, possibly, magnetic resonance imaging, as a result of doping the upconversion nanoparticles with Gd3+ ions.
- Full Text:
- Date Issued: 2014
- Authors: Taylor, Jessica Mary
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54621 , vital:26594
- Description: Sphere and star shaped NaYGdF4:Yb/Er(Tm) upconversion nanoparticles were successfully synthesized utilizing a methanol assisted thermal decomposition approach and their chemical, spectroscopic and fluorescence properties were fully characterized. In addition, their influence on the spectroscopic and fluorescence properties of two phthalocyanines (Pcs) (unsubstituted tetrathiophenoxy phthalocyanine (H2Pc) and aluminium octacarboxy phthalocyanine (Cl)AlOCPc) was investigated. Upconversion nanoparticles were found to produce characteristic upconversion fluorescence emissions in the blue, green, red and NIR regions and were also shown to possess paramagnetic properties. Simple mixing with an H2Pc in toluene was found to exert no change on the spectroscopic or fluorescence properties of the Pc while covalent conjugation to a (Cl)AlOCPc resulted in a large Q band blue shift accompanied by a decrease in fluorescence lifetimes in DMSO. The red light excitation mediated singlet oxygen generation of the H2Pc mixed with upconversion nanoparticles was investigated and singlet oxygen fluorescence lifetimes were found to decrease in the presence of the nanoparticles. Upconversion mediated singlet oxygen generation, by way of resonance energy transfer to the Pc, was also attempted using 972 nm excitation; however, no singlet oxygen was detected utilizing singlet oxygen NIR emission detection. Pending further work using alternative singlet oxygen detection methods, this suggests that while upconversion nanoparticles possess excellent fluorescent imaging capabilities, they are relatively inefficient in inducing singlet oxygen production simply when mixed with phthalocyanines. Despite this, by combining phthalocyanines and upconversion nanoparticles, we present a system capable of: multimodal imaging, using both upconversion and phthalocyanines emissions, singlet oxygen generation, via direct excitation of the phthalocyanine with red laser light, and, possibly, magnetic resonance imaging, as a result of doping the upconversion nanoparticles with Gd3+ ions.
- Full Text:
- Date Issued: 2014
Synthesis and evaluation of novel heterocycles as potential HIV-1 enzyme inhibitors
- Ngnie Tuemgnie, Gaëlle Tatiana
- Authors: Ngnie Tuemgnie, Gaëlle Tatiana
- Date: 2014
- Subjects: Heterocyclic compounds , Enzyme inhibitors , Organic compounds , Green chemistry , Coumarins , HIV (Viruses) Enzymes
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/194293 , vital:45440 , DOI https://doi.org/10.21504/10962/194293
- Description: This project has focussed on the synthesis and the evaluation of organic compounds as potential HIV-1 enzyme inhibitors, by making use of green chemistry (microwave assisted synthesis and click chemistry), palladium catalyzed reactions (Heck and Sonogashira coupling), Baylis Hillman methodology and aldol condensation. These compounds were synthesized in good yields and fully characterised by spectroscopic techniques. Biological assay data revealed that some of the compounds possess high inhibitory activity and their effective inhibitory concentration was as good as those of drugs in clinical use. These potential drug molecules were identified by preliminary investigations carried out by molecular modelling where a trend of their inhibitory activity against different enzymes was anticipated. Benzotriazole-AZT conjugates generated by 1,3-dipolar cycloaddition of anthranilic acid derivatives with AZT showed good inhibitory activity in silico against both HIV-1 protease (PR) and HIV-1 reverse transcriptase (RT) enzymes. Still in line with our dual action strategy, cinnamate ester-AZT conjugates were synthesized in three steps starting from benzaldehyde derivatives with a click reaction at the final step. These compounds also showed some inhibitory activity against HIV-1 RT enzyme (88%). In addition, the cinnamoyl fragment attached to AZT appeared to improve the activity of AZT against HIV-1 RT. Peptide chemistry involving carbonyl diimidazole as a coupling reagent between cinnamic acid derivatives and protected amino acids was used to prepare substituted amino acid derivatives which appeared to be very active against the integrase (IN) enzyme (88%). Commercially available coumarin was iodinated and derivatized through palladium catalyzed Heck and Sonogashira reactions with activated alkenes and a terminal alkyne respectively to afford novel coumarin derivatives in good yields. Optimization studies on the Heck reaction with regards to the phosphine ligand, the palladium catalyst and the solvent were carried out to afford novel formyl substituted cinnamate esters with nonaflyl salicylaldehyde derivatives. , Thesis (PhD) -- Faculty of Science, Chemistry, 2014
- Full Text:
- Date Issued: 2014
- Authors: Ngnie Tuemgnie, Gaëlle Tatiana
- Date: 2014
- Subjects: Heterocyclic compounds , Enzyme inhibitors , Organic compounds , Green chemistry , Coumarins , HIV (Viruses) Enzymes
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/194293 , vital:45440 , DOI https://doi.org/10.21504/10962/194293
- Description: This project has focussed on the synthesis and the evaluation of organic compounds as potential HIV-1 enzyme inhibitors, by making use of green chemistry (microwave assisted synthesis and click chemistry), palladium catalyzed reactions (Heck and Sonogashira coupling), Baylis Hillman methodology and aldol condensation. These compounds were synthesized in good yields and fully characterised by spectroscopic techniques. Biological assay data revealed that some of the compounds possess high inhibitory activity and their effective inhibitory concentration was as good as those of drugs in clinical use. These potential drug molecules were identified by preliminary investigations carried out by molecular modelling where a trend of their inhibitory activity against different enzymes was anticipated. Benzotriazole-AZT conjugates generated by 1,3-dipolar cycloaddition of anthranilic acid derivatives with AZT showed good inhibitory activity in silico against both HIV-1 protease (PR) and HIV-1 reverse transcriptase (RT) enzymes. Still in line with our dual action strategy, cinnamate ester-AZT conjugates were synthesized in three steps starting from benzaldehyde derivatives with a click reaction at the final step. These compounds also showed some inhibitory activity against HIV-1 RT enzyme (88%). In addition, the cinnamoyl fragment attached to AZT appeared to improve the activity of AZT against HIV-1 RT. Peptide chemistry involving carbonyl diimidazole as a coupling reagent between cinnamic acid derivatives and protected amino acids was used to prepare substituted amino acid derivatives which appeared to be very active against the integrase (IN) enzyme (88%). Commercially available coumarin was iodinated and derivatized through palladium catalyzed Heck and Sonogashira reactions with activated alkenes and a terminal alkyne respectively to afford novel coumarin derivatives in good yields. Optimization studies on the Heck reaction with regards to the phosphine ligand, the palladium catalyst and the solvent were carried out to afford novel formyl substituted cinnamate esters with nonaflyl salicylaldehyde derivatives. , Thesis (PhD) -- Faculty of Science, Chemistry, 2014
- Full Text:
- Date Issued: 2014
Studies towards the development of novel antimalarial agents
- Authors: Adeyemi, Christiana Modupe
- Date: 2015
- Subjects: Antimalarials , Malaria , Drug resistance , Drug development , Enzyme inhibitors , Plasmodium
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54645 , vital:26596
- Description: Considerable efforts have been made in the modification of existing antimalarial drugs, and the support of incentive programmes have led to a drastic decrease in malaria cases reported by WHO during the past 6 years. However, the development of drug resistance threatens the eradication of this deadly disease and has prompted research on the synthesis of novel antimalarial drugs. Our research has involved the design and synthesis of novel benzylated phosphonate esters as potential 1-deoxy-D-xylose-5-phosphate reductoisomerase (DXR) inhibitors. A series of amidoalkylphosphonate esters were obtained by reacting various 3-subsituted anilines and heterocyclic amines with chloroalkanoyl chlorides and reacting the resulting chloroalkanamides with triethyl phosphite using Michaelis-Arbuzov methodology. Benzylation of the phosphonate esters afforded a series of novel N-benzylated derivatives in good yields and these compounds were fully characterised by NMR and HRMS methods. Several approaches to the introduction of a benzyl group at the C-2 position of the phosphonate ester derivatives have been explored, leading unexpectedly to the isolation of unprecedented tetrahydrofuranyl derivatives. Studies towards the preparation of potential bi-functional PfDXR / HIV-1 RT inhibitors have also been initiated. Preliminary in silico docking studies of selected non-benzylated and benzylated phosphonated derivatives into the Pf-DXR active-site has provided useful insight into the binding potential of these ligands. Bioassays have revealed a very low toxicity for all the synthesised phosphonated compounds and a number of these ligands also exhibit a promising inhibitory activity against the Plasmodium parasite.
- Full Text:
- Date Issued: 2015
- Authors: Adeyemi, Christiana Modupe
- Date: 2015
- Subjects: Antimalarials , Malaria , Drug resistance , Drug development , Enzyme inhibitors , Plasmodium
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54645 , vital:26596
- Description: Considerable efforts have been made in the modification of existing antimalarial drugs, and the support of incentive programmes have led to a drastic decrease in malaria cases reported by WHO during the past 6 years. However, the development of drug resistance threatens the eradication of this deadly disease and has prompted research on the synthesis of novel antimalarial drugs. Our research has involved the design and synthesis of novel benzylated phosphonate esters as potential 1-deoxy-D-xylose-5-phosphate reductoisomerase (DXR) inhibitors. A series of amidoalkylphosphonate esters were obtained by reacting various 3-subsituted anilines and heterocyclic amines with chloroalkanoyl chlorides and reacting the resulting chloroalkanamides with triethyl phosphite using Michaelis-Arbuzov methodology. Benzylation of the phosphonate esters afforded a series of novel N-benzylated derivatives in good yields and these compounds were fully characterised by NMR and HRMS methods. Several approaches to the introduction of a benzyl group at the C-2 position of the phosphonate ester derivatives have been explored, leading unexpectedly to the isolation of unprecedented tetrahydrofuranyl derivatives. Studies towards the preparation of potential bi-functional PfDXR / HIV-1 RT inhibitors have also been initiated. Preliminary in silico docking studies of selected non-benzylated and benzylated phosphonated derivatives into the Pf-DXR active-site has provided useful insight into the binding potential of these ligands. Bioassays have revealed a very low toxicity for all the synthesised phosphonated compounds and a number of these ligands also exhibit a promising inhibitory activity against the Plasmodium parasite.
- Full Text:
- Date Issued: 2015
Study into the synthesis, characterisation and applications of Vanadium-based metal organic frameworks, using 1, 2, 4, 5-benzenetetracarboxylic acid
- Authors: Feldmann, Wesley
- Date: 2016
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/55245 , vital:26680
- Description: This study focussed on the synthesis, characterisation and catalytic application of synthesised vanadium-based Metal-Organic Frameworks using 1,2,4,5-benzenetetracarboxylic acid as a ligand. A number of synthetic methods were tested in multiple attempts to synthesise a V-MOF, these included; ambient, gel, reflux and solvothermal methods of synthesis. Two products of interest were identified, an ambient synthesis produced a vanadium-based complex with the empirical formula: V2O2(Na2H2B4C).6H2O (RU-V2) and a solvothermal synthesis produced a MOF with the empirical formula: V2O2(H2O)2(B4C) (RU-V1). Both products were characterised using elemental analysis, infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry and X-ray powder diffraction. The catalytic activity of these products was tested, alongside the activity of the solid decavanadate ion, for the conversion of cyclohexene to cyclohexene oxide. The decavanadate ion was included to determine if the ion was catalytically active in the solid state, to potentially be used in the construction of a future MOF or V-complex. The reaction for the conversion of cyclohexene to cyclohexene oxide was chosen, as it has been previously conducted using a V-MOF and was found to be successful. The product of the reaction, the epoxide: cyclohexene oxide, is a very useful precursor for a number of reactions involved in the pharmaceutical industry, so developing catalysts which are able to convert cyclohexene to the epoxide with high yields and selectivities are well sought after in industry. The results of the catalytic reactions were varied, as the materials exhibited high yields and selectivities to the epoxide, but these results were only obtained when water was present in the reaction mixture. Water was able to bring about the cleavage of the bonds between the metal and ligand in a highly coordinated framework, at a faster rate than other solvents, such as decane. This ultimately leads to the structural decomposition of the entire complex or framework, depending upon the reaction time. The use of water was a double edged sword in that it was required to initiate the catalytic reaction, but was also the reason that the catalytic materials were noted to decompose over time. The solid decavanadate ion was only noted to exhibit homogeneous activity by dissolving into the small volume of water present in the reaction mixture. The study proved that using a multidentate ligand such as 1,2,4,5-benzenetetracarboxylic acid yielded products which were highly coordinated in nature and would therefore not have large open spaces associated with them, which is commonly observed with other MOFs. Instead the closed nature of the synthesised complexes and frameworks offered a different environment for catalytic reactions, where the small pores/channels had a controlling and inhibiting effect on the reaction. The conversion of cyclohexene to the epoxide is accompanied with a number of undesired side products, so when using the synthesised closed-natured MOF, it was found that there was a greater selectivity for the epoxide over other potential products. This indicates that close natured MOFs may find application in catalytic reactions which require high selectivities for a particular product.
- Full Text:
- Date Issued: 2016
- Authors: Feldmann, Wesley
- Date: 2016
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/55245 , vital:26680
- Description: This study focussed on the synthesis, characterisation and catalytic application of synthesised vanadium-based Metal-Organic Frameworks using 1,2,4,5-benzenetetracarboxylic acid as a ligand. A number of synthetic methods were tested in multiple attempts to synthesise a V-MOF, these included; ambient, gel, reflux and solvothermal methods of synthesis. Two products of interest were identified, an ambient synthesis produced a vanadium-based complex with the empirical formula: V2O2(Na2H2B4C).6H2O (RU-V2) and a solvothermal synthesis produced a MOF with the empirical formula: V2O2(H2O)2(B4C) (RU-V1). Both products were characterised using elemental analysis, infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry and X-ray powder diffraction. The catalytic activity of these products was tested, alongside the activity of the solid decavanadate ion, for the conversion of cyclohexene to cyclohexene oxide. The decavanadate ion was included to determine if the ion was catalytically active in the solid state, to potentially be used in the construction of a future MOF or V-complex. The reaction for the conversion of cyclohexene to cyclohexene oxide was chosen, as it has been previously conducted using a V-MOF and was found to be successful. The product of the reaction, the epoxide: cyclohexene oxide, is a very useful precursor for a number of reactions involved in the pharmaceutical industry, so developing catalysts which are able to convert cyclohexene to the epoxide with high yields and selectivities are well sought after in industry. The results of the catalytic reactions were varied, as the materials exhibited high yields and selectivities to the epoxide, but these results were only obtained when water was present in the reaction mixture. Water was able to bring about the cleavage of the bonds between the metal and ligand in a highly coordinated framework, at a faster rate than other solvents, such as decane. This ultimately leads to the structural decomposition of the entire complex or framework, depending upon the reaction time. The use of water was a double edged sword in that it was required to initiate the catalytic reaction, but was also the reason that the catalytic materials were noted to decompose over time. The solid decavanadate ion was only noted to exhibit homogeneous activity by dissolving into the small volume of water present in the reaction mixture. The study proved that using a multidentate ligand such as 1,2,4,5-benzenetetracarboxylic acid yielded products which were highly coordinated in nature and would therefore not have large open spaces associated with them, which is commonly observed with other MOFs. Instead the closed nature of the synthesised complexes and frameworks offered a different environment for catalytic reactions, where the small pores/channels had a controlling and inhibiting effect on the reaction. The conversion of cyclohexene to the epoxide is accompanied with a number of undesired side products, so when using the synthesised closed-natured MOF, it was found that there was a greater selectivity for the epoxide over other potential products. This indicates that close natured MOFs may find application in catalytic reactions which require high selectivities for a particular product.
- Full Text:
- Date Issued: 2016
Evaluating the potential of monometallic and bimetallic nanomaterials as horseradish peroxidase mimetics
- Authors: Mvango, Sindisiwe
- Date: 2017
- Subjects: Uncatalogued
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65134 , vital:28694
- Description: This study presents the synthesis of citrate-capped gold nanoparticles (cit-AuNPs), copper oxide nanoparticles (CuONPs), glutathione-capped gold nanoparticles (GSH-AuNPs), 4- aminothiophenol-capped gold nanoparticles (4-ATP-AuNPs), 4-mercapto benzoic acid- capped gold nanoparticles (4-MBA-AuNPs) and copper oxide gold nanoalloys (CuO-Au nanoalloys). Microscopy and spectroscopy techniques were used to confirm the successful synthesis of these nanoparticles. The synthesized nanoparticles were studied their potential applications as horseradish peroxidase (HPR) enzyme mimetics and for the detection of glucose. The cit-AuNPs and GSH-AuNPs exhibited peroxidase-like activity towards hydrogen peroxide (H2O2) with high Michaelis-Menten (Km) values of 61.5 mM and 30.8 mM, respectively. The other nanoparticles, that is, 4-ATP-AuNPs, CuONPs and CuO-Au nanoalloys gave lower Km values of 4.74 mM, 1.92 mM and 4.05 mM, respectively. The obtained Km values were comparable to those of HRP enzymes which ranged from 0.214 - 3.70 mM with 4-ATP-AuNPs and CuO-Au nanoalloys slightly higher. These values were within the reasonable experimental values of the HRP enzyme. The studies showed that the gold nanoparticles had low adsorptive efficiency towards H2O2 compared to the copper-based nanoparticles (CuONPs and CuO-Au nanoalloys). The CuO-Au nanoalloys also showed the synergistic effect between the gold and copper nanoparticles with extended linear concentration range for the quantification of H2O2. The mechanism of catalysis was confirmed using UV-vis spectroscopy and electron paramagnetic resonance (EPR) in that the generation of reactive oxygen species was observed. The use of 1,3-diphenylisobenzofuran (DPBF) as radical quencher and 5,5- dimethyl-1-pyrroline N-oxide (DMPO) as a radical scavenger confirmed the production of reductive reactive oxygen species using UV-vis and EPR studies. The rate of production of reactive oxygen species in the gold-based nanoparticles was small compared to the copper-based nanoparticles, that is CuONPs and CuO-Au (bimetallic) nanoalloys. The synthesized nanoparticles were further studied their potential use in the colorimetric detection of glucose. The copper-based nanomaterials, CuONPs and CuO-Au nanoalloys, were excellent towards detection of glucose, with a limit of detection (LoD) of 9.34 pM for CuONPs and 6.75 pM for CuO-Au nanoalloys. The linear concentration (LCR) range of CuONPs was 0 to 70 pM and for CuO-Au nanoalloys the LCR was 0.0 - 30 pM. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
- Authors: Mvango, Sindisiwe
- Date: 2017
- Subjects: Uncatalogued
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65134 , vital:28694
- Description: This study presents the synthesis of citrate-capped gold nanoparticles (cit-AuNPs), copper oxide nanoparticles (CuONPs), glutathione-capped gold nanoparticles (GSH-AuNPs), 4- aminothiophenol-capped gold nanoparticles (4-ATP-AuNPs), 4-mercapto benzoic acid- capped gold nanoparticles (4-MBA-AuNPs) and copper oxide gold nanoalloys (CuO-Au nanoalloys). Microscopy and spectroscopy techniques were used to confirm the successful synthesis of these nanoparticles. The synthesized nanoparticles were studied their potential applications as horseradish peroxidase (HPR) enzyme mimetics and for the detection of glucose. The cit-AuNPs and GSH-AuNPs exhibited peroxidase-like activity towards hydrogen peroxide (H2O2) with high Michaelis-Menten (Km) values of 61.5 mM and 30.8 mM, respectively. The other nanoparticles, that is, 4-ATP-AuNPs, CuONPs and CuO-Au nanoalloys gave lower Km values of 4.74 mM, 1.92 mM and 4.05 mM, respectively. The obtained Km values were comparable to those of HRP enzymes which ranged from 0.214 - 3.70 mM with 4-ATP-AuNPs and CuO-Au nanoalloys slightly higher. These values were within the reasonable experimental values of the HRP enzyme. The studies showed that the gold nanoparticles had low adsorptive efficiency towards H2O2 compared to the copper-based nanoparticles (CuONPs and CuO-Au nanoalloys). The CuO-Au nanoalloys also showed the synergistic effect between the gold and copper nanoparticles with extended linear concentration range for the quantification of H2O2. The mechanism of catalysis was confirmed using UV-vis spectroscopy and electron paramagnetic resonance (EPR) in that the generation of reactive oxygen species was observed. The use of 1,3-diphenylisobenzofuran (DPBF) as radical quencher and 5,5- dimethyl-1-pyrroline N-oxide (DMPO) as a radical scavenger confirmed the production of reductive reactive oxygen species using UV-vis and EPR studies. The rate of production of reactive oxygen species in the gold-based nanoparticles was small compared to the copper-based nanoparticles, that is CuONPs and CuO-Au (bimetallic) nanoalloys. The synthesized nanoparticles were further studied their potential use in the colorimetric detection of glucose. The copper-based nanomaterials, CuONPs and CuO-Au nanoalloys, were excellent towards detection of glucose, with a limit of detection (LoD) of 9.34 pM for CuONPs and 6.75 pM for CuO-Au nanoalloys. The linear concentration (LCR) range of CuONPs was 0 to 70 pM and for CuO-Au nanoalloys the LCR was 0.0 - 30 pM. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
Nonlinear optical properties of Sn(IV) phthalocyanines: experimental and theoretical approach
- Authors: Louzada, Marcel Severiano
- Date: 2017
- Subjects: Phthalocyanines , Nonlinear optics
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/57852 , vital:26996
- Description: This work presents the nonlinear properties of six Sn(IV) Phthalocyanines. Three of the phthalocyanines are linked by an alkylthiol substituent and the rest are linked with a phenoxy substituent. For all six compounds non-linear optic analysis was carried out in four solvents: chloroform, toluene, dichloromethane, and tetrahydrofuran, and their differences were recorded. Calculation of the linear, singlet excited, triplet excited and two photon absorption cross-sections were also carried out and the results compared. To form a comparison the first order hyperpolarizabilities, DFT calculations were also performed and the results compared to see if the behaviour between the two properties can be predicted using DFT.
- Full Text:
- Date Issued: 2017
- Authors: Louzada, Marcel Severiano
- Date: 2017
- Subjects: Phthalocyanines , Nonlinear optics
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/57852 , vital:26996
- Description: This work presents the nonlinear properties of six Sn(IV) Phthalocyanines. Three of the phthalocyanines are linked by an alkylthiol substituent and the rest are linked with a phenoxy substituent. For all six compounds non-linear optic analysis was carried out in four solvents: chloroform, toluene, dichloromethane, and tetrahydrofuran, and their differences were recorded. Calculation of the linear, singlet excited, triplet excited and two photon absorption cross-sections were also carried out and the results compared. To form a comparison the first order hyperpolarizabilities, DFT calculations were also performed and the results compared to see if the behaviour between the two properties can be predicted using DFT.
- Full Text:
- Date Issued: 2017
Spectroscopic and electrochemical characterization of thio binuclear phthalocyanine complexes
- Authors: Makinde, Zainab Olusola
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/59287 , vital:27541
- Description: Expected release date-April 2019
- Full Text:
- Date Issued: 2017
- Authors: Makinde, Zainab Olusola
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/59287 , vital:27541
- Description: Expected release date-April 2019
- Full Text:
- Date Issued: 2017
Synthesis and evaluation of arylpyrrole-chalcone hybrids as antiplasmodial and antitrypanosomal agents
- Authors: Zulu, Ayanda Ignatia
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/65268 , vital:28716
- Description: Expected release date-May 2019
- Full Text:
- Date Issued: 2017
- Authors: Zulu, Ayanda Ignatia
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/65268 , vital:28716
- Description: Expected release date-May 2019
- Full Text:
- Date Issued: 2017
Synthesis, characterisation and evaluation of benzoxaborole-based hybrids as antiplasmodial agents
- Authors: Gumbo, Maureen
- Date: 2017
- Subjects: Malaria Chemotherapy , Antimalarials , Boron compounds , Drug resistance , Plasmodium falciparum , Drug development
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/59193 , vital:27456
- Description: Malaria is a mosquito-borne disease, which continues to pose a threat to the entire humanity. About 40% of the world population is estimated to be at risk of infections by malaria. Despite efforts undertaken by scientific community, government entities and international organizations, malaria is still rampant. The major problem is drug resistance, where the Plasmodium spp have over the past decades developed drug resistance against available drugs. In order to counter this problem, novel antimalarial drugs that are efficacious and with novel mode of action are of great necessity. Benzoxaborole derivatives have been shown to exhibit promising antimalarial activity against Plasmodium falciparum strains. Previous studies reported on the compounds such as 6-(2- (alkoxycarbonyl)pyrazinyl-5-oxy)-1,3-dihydro-1-hydroxy-2,1-benzoxaboroles, which showed good antimalarial activity against both W7 and 3D7 strains without significant toxicity. On the other hand, chloroquine (CQ) and cinnamic acids have a wide variety of biological activity including antimalarial activity. Herein, a hybridisation strategy was employed to synthesise new CQ-benzoxaborole and cinnamoyl-benzoxaborole hybrids. CQ-Benzoxaborole 2.12a-c and cinnamoylbenzoxaborole 2.11a-g hydrid molecules were synthesised in low to good yields. Their structural identities were confirmed using conventional spectroscopic techniques (1H and 13C NMR, and mass spectrometry). CQ-benzoxaborole compounds, however, showed instability, and only 2.12b was used for in vitro biological assay and showed activity comparable to CQ. Furthermore, in vitro biological assay revealed that compounds 2.11a-g poorly inhibited the growth of P. falciparum parasites. Interestingly, these compounds, however, exhibited satisfactory activity against Trypanosoma brucei with IC50 = 0.052 μM for compound 2.11g. The cell cytotoxicity assay of all final compounds confirmed that all CQ-benzoxaborole 2.12b and cinnamoyl-benzoxaborole 2.11a-g hybrids were non-toxic against HeLa cell lines. However, efforts to further expand the structure-activity relationship (SAR) of CQbenzoxaborole by increasing the length of the linker with one extra carbon (Scheme 2.10) were not possible as an important precursor 6-formylbenzoxaborole 2.29 could not be synthesized in sufficient yields. , Thesis (MSc) -- Faculty of Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
- Authors: Gumbo, Maureen
- Date: 2017
- Subjects: Malaria Chemotherapy , Antimalarials , Boron compounds , Drug resistance , Plasmodium falciparum , Drug development
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/59193 , vital:27456
- Description: Malaria is a mosquito-borne disease, which continues to pose a threat to the entire humanity. About 40% of the world population is estimated to be at risk of infections by malaria. Despite efforts undertaken by scientific community, government entities and international organizations, malaria is still rampant. The major problem is drug resistance, where the Plasmodium spp have over the past decades developed drug resistance against available drugs. In order to counter this problem, novel antimalarial drugs that are efficacious and with novel mode of action are of great necessity. Benzoxaborole derivatives have been shown to exhibit promising antimalarial activity against Plasmodium falciparum strains. Previous studies reported on the compounds such as 6-(2- (alkoxycarbonyl)pyrazinyl-5-oxy)-1,3-dihydro-1-hydroxy-2,1-benzoxaboroles, which showed good antimalarial activity against both W7 and 3D7 strains without significant toxicity. On the other hand, chloroquine (CQ) and cinnamic acids have a wide variety of biological activity including antimalarial activity. Herein, a hybridisation strategy was employed to synthesise new CQ-benzoxaborole and cinnamoyl-benzoxaborole hybrids. CQ-Benzoxaborole 2.12a-c and cinnamoylbenzoxaborole 2.11a-g hydrid molecules were synthesised in low to good yields. Their structural identities were confirmed using conventional spectroscopic techniques (1H and 13C NMR, and mass spectrometry). CQ-benzoxaborole compounds, however, showed instability, and only 2.12b was used for in vitro biological assay and showed activity comparable to CQ. Furthermore, in vitro biological assay revealed that compounds 2.11a-g poorly inhibited the growth of P. falciparum parasites. Interestingly, these compounds, however, exhibited satisfactory activity against Trypanosoma brucei with IC50 = 0.052 μM for compound 2.11g. The cell cytotoxicity assay of all final compounds confirmed that all CQ-benzoxaborole 2.12b and cinnamoyl-benzoxaborole 2.11a-g hybrids were non-toxic against HeLa cell lines. However, efforts to further expand the structure-activity relationship (SAR) of CQbenzoxaborole by increasing the length of the linker with one extra carbon (Scheme 2.10) were not possible as an important precursor 6-formylbenzoxaborole 2.29 could not be synthesized in sufficient yields. , Thesis (MSc) -- Faculty of Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
Synthesis, characterisation and evaluation of ferrocene-containing Novobiocin analogues for anticancer and antiplasmodial activity through inhibition of Hsp90
- Authors: Mbaba, Mziyanda
- Date: 2017
- Subjects: Antibiotics Synthesis , Ferrocene , Heat shock proteins , Antimalarials , Cancer Chemotherapy
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65111 , vital:28690
- Description: Novobiocin (Nb) is a coumarin type antibiotic isolated from the bacterium species of Streptomyces and possesses modest anticancer and antimalarial activities. Nb and analogues have been extensively explored as potential anticancer agents through inhibition of the C- terminal domain of heat shock protein 90 (Hsp90), which plays a pivotal role in the proteinfolding machinery of cells. There has been little effort in the exploration of Nb and derivatives for antimalarial activity. Incorporation of organometallic units, such as ferrocene (Fc), into bioactive chemical scaffolds remains an attractive approach for developing new therapeutic agents for treatment of several ailments. The current study sought to investigate the anticancer and antiplasmodial effects of incorporating ferrocene (Fc) into Nb scaffold presumably through inhibition of Hsp90. The ferrocenyl Nb analogues containing simplified structural motifs such as phenyl, benzyl, and piperidine were synthesized in six to nine steps employing conventional synthetic organic protocols adapted from literature, and the compounds were accessed in reasonable yields. For comparison purposes, a selection of organic Nb analogues were also included in the study. The target compounds were characterized by spectroscopic techniques including 1-dimensional nuclear magnetic resonance (1D NMR) and high-resolution mass spectroscopy. The synthesized compounds were evaluated in vitro for potential anticancer and antiplasmodial activities using the breast cancer cell line (HCC38) and chloroquine-sensitive strain (3D7) of the malaria parasite, Plasmodium falciparum. The presence of the Fc unit was found to enhance both anticancer and antiplasmodial activities of the resultant ferrocenyl Nb compounds with IC50 values in the low to mid micromolar range. Hsp90 inhibitory studies of the ferrocenyl Nb analogues possessing superior activities (2.13a and 2.20c) were also conducted using different yeast strains expressing both human and malarial Hsp90 isoforms: hHsp90a/p and PfHsp90, respectively. The results of Hsp90 inhibitory studies suggested no direct correlation between the observed activities of the analogues and Hsp90 inhibition. However, since the conditions of the assay were not optimised due to time constrains of the project, these observed data remained to be confirmed. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
- Authors: Mbaba, Mziyanda
- Date: 2017
- Subjects: Antibiotics Synthesis , Ferrocene , Heat shock proteins , Antimalarials , Cancer Chemotherapy
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65111 , vital:28690
- Description: Novobiocin (Nb) is a coumarin type antibiotic isolated from the bacterium species of Streptomyces and possesses modest anticancer and antimalarial activities. Nb and analogues have been extensively explored as potential anticancer agents through inhibition of the C- terminal domain of heat shock protein 90 (Hsp90), which plays a pivotal role in the proteinfolding machinery of cells. There has been little effort in the exploration of Nb and derivatives for antimalarial activity. Incorporation of organometallic units, such as ferrocene (Fc), into bioactive chemical scaffolds remains an attractive approach for developing new therapeutic agents for treatment of several ailments. The current study sought to investigate the anticancer and antiplasmodial effects of incorporating ferrocene (Fc) into Nb scaffold presumably through inhibition of Hsp90. The ferrocenyl Nb analogues containing simplified structural motifs such as phenyl, benzyl, and piperidine were synthesized in six to nine steps employing conventional synthetic organic protocols adapted from literature, and the compounds were accessed in reasonable yields. For comparison purposes, a selection of organic Nb analogues were also included in the study. The target compounds were characterized by spectroscopic techniques including 1-dimensional nuclear magnetic resonance (1D NMR) and high-resolution mass spectroscopy. The synthesized compounds were evaluated in vitro for potential anticancer and antiplasmodial activities using the breast cancer cell line (HCC38) and chloroquine-sensitive strain (3D7) of the malaria parasite, Plasmodium falciparum. The presence of the Fc unit was found to enhance both anticancer and antiplasmodial activities of the resultant ferrocenyl Nb compounds with IC50 values in the low to mid micromolar range. Hsp90 inhibitory studies of the ferrocenyl Nb analogues possessing superior activities (2.13a and 2.20c) were also conducted using different yeast strains expressing both human and malarial Hsp90 isoforms: hHsp90a/p and PfHsp90, respectively. The results of Hsp90 inhibitory studies suggested no direct correlation between the observed activities of the analogues and Hsp90 inhibition. However, since the conditions of the assay were not optimised due to time constrains of the project, these observed data remained to be confirmed. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
Tetra 4-(propargyloxy)phenoxy phthalocyanines: synthesis, spectroscopic, nonlinear optical and electrocatalytic properties
- Authors: Mwanza, Daniel
- Date: 2017
- Subjects: Phthalocyanines , Nonlinear optics , Electrocatalysis , Spectrum analysis , Thermogravimetry , Phthalocyanines Spectra
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65144 , vital:28695
- Description: This study presents the synthesis, spectroscopic, photophysical and theoretical characterisation of metal-free (H2TPrOPhOPc), cobalt (CoTPrOPhOPc) and manganese (MnTPrOPhOPc) tetra 4-(4-propargyloxy) phenoxy phthalocyanines. Thermal analysis using thermogravimetric analysis (TGA) confirmed the excellent thermal stability of synthesized tetra 4-(4- propargyloxy) phenoxy phthalocyanines. The metal complexes, CoTPrOPhOPc and MnTPrOPhOPc, exhibited better thermal stability when compared to H2TPrOPhOPc. The residual percentage weight remaining was approximately 70% for CoTPrOPhOPc and MnTPrOPhOPc and 45% for H2TPrOPhOPc after 600°C, clearly confirming the stability of the metal complexes. The MTPrOPhOPcs (where M = H2, Co and Mn) complexes exhibited excellent nonlinear optical properties with strong reverse saturable absorption (RSA), especially when 560 nm excitation laser was used. Their nonlinear optical properties followed this trend: H2TPrOPhOPc > CoTPrOPhOPc > MnTPrOPhOPc. According to the trend observed, the H2TPrOPhOPc was an excellent nonlinear optical limiter when compared to the CoTPrOPhOPc and MnTPrOPhOPc. All the investigated complexes exhibited optical limiting properties comparable to the phthalocyanine complexes reported in the literature. The MTPrOPhOPc complexes were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. For the electrocatalytic studies, the synthesized complexes were immobilized onto gold electrode surfaces pre-functionalized with phenylazide (Au-PAz) monolayer. Copper (I) catalyzed alkynyl-azide cycloaddition reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs modified gold surfaces (Au-PAz-MTPrOPhOPc) exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and surface characterisation of the functionalised gold electrode surfaces confirmed the presence of the MTPrOPhOPcs and their electroanalysis was excellent towards electrocatalytic reduction of H2O2, with the limit of detection (LoD) and limit of quantification (LoQ) in the ^M range. The electrocatalytic reduction peaks for H2O2 were observed at -0.37 V for Au-PAz-MnTPrOPhOPc and -0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-MnTPrOPhOPc and Au- PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
- Authors: Mwanza, Daniel
- Date: 2017
- Subjects: Phthalocyanines , Nonlinear optics , Electrocatalysis , Spectrum analysis , Thermogravimetry , Phthalocyanines Spectra
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65144 , vital:28695
- Description: This study presents the synthesis, spectroscopic, photophysical and theoretical characterisation of metal-free (H2TPrOPhOPc), cobalt (CoTPrOPhOPc) and manganese (MnTPrOPhOPc) tetra 4-(4-propargyloxy) phenoxy phthalocyanines. Thermal analysis using thermogravimetric analysis (TGA) confirmed the excellent thermal stability of synthesized tetra 4-(4- propargyloxy) phenoxy phthalocyanines. The metal complexes, CoTPrOPhOPc and MnTPrOPhOPc, exhibited better thermal stability when compared to H2TPrOPhOPc. The residual percentage weight remaining was approximately 70% for CoTPrOPhOPc and MnTPrOPhOPc and 45% for H2TPrOPhOPc after 600°C, clearly confirming the stability of the metal complexes. The MTPrOPhOPcs (where M = H2, Co and Mn) complexes exhibited excellent nonlinear optical properties with strong reverse saturable absorption (RSA), especially when 560 nm excitation laser was used. Their nonlinear optical properties followed this trend: H2TPrOPhOPc > CoTPrOPhOPc > MnTPrOPhOPc. According to the trend observed, the H2TPrOPhOPc was an excellent nonlinear optical limiter when compared to the CoTPrOPhOPc and MnTPrOPhOPc. All the investigated complexes exhibited optical limiting properties comparable to the phthalocyanine complexes reported in the literature. The MTPrOPhOPc complexes were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. For the electrocatalytic studies, the synthesized complexes were immobilized onto gold electrode surfaces pre-functionalized with phenylazide (Au-PAz) monolayer. Copper (I) catalyzed alkynyl-azide cycloaddition reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs modified gold surfaces (Au-PAz-MTPrOPhOPc) exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and surface characterisation of the functionalised gold electrode surfaces confirmed the presence of the MTPrOPhOPcs and their electroanalysis was excellent towards electrocatalytic reduction of H2O2, with the limit of detection (LoD) and limit of quantification (LoQ) in the ^M range. The electrocatalytic reduction peaks for H2O2 were observed at -0.37 V for Au-PAz-MnTPrOPhOPc and -0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-MnTPrOPhOPc and Au- PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
BODIPY dyes for singlet oxygen and optical limiting applications
- Authors: Harris, Jessica
- Date: 2018
- Subjects: Photosensitizing compounds , Active oxygen -- Physiological effect , Photochemotherapy , Cancer -- Treatment , Nonlinear optics , BODIPY (Boron-dipyrromethene)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/58002 , vital:27014
- Description: A series of structurally related BODIPY dyes were synthesised and characterised. Their photophysical properties were studied in order to determine whether they would be suitable candidates for use as photosensitisers in the photodynamic therapy (PDT) treatment of cancer. The synthesis of two highly fluorescent BODIPY cores was achieved via the acid-catalysed condensation of a pyrrole and a functionalised aldehyde. In order to promote intersystem crossing, and hence improve the singlet oxygen generation of these dyes, bromine atoms were added at the 2,6-positions of the BODIPY core. These dibrominated analogues showed good singlet oxygen quantum yields, and excellent photostability in ethanol. In order to red-shift the main spectral bands of the BODIPY dyes towards the therapeutic window, vinyl/ styryl groups were introduced at the 3-, 5-, and 7-positions via a modified Knoevengal condensation reaction. The addition of vinyl/ styryl groups to the BODIPY core caused an increase in fluorescence quantum yield as well as a decrease in singlet oxygen quantum yield with respect to the dibrominated analogues. However, two of the red-shifted BODIPY dyes still showed moderate singlet oxygen quantum yields. The use of BODIPY dyes in nonlinear optics (NLO) was explored. The nonlinear optical characterisations and optical limiting properties of a series of 3,5-dithienylenevinylene BODIPY dyes were studied, both in dimethylformamide (DMF) solution and when embedded in poly(bisphenol A carbonate) (PBC) as thin films. The 3,5-dithienylenevinylene BODIPY dyes showed typical nonlinear absorption behaviour, with reverse saturable absorption (RSA) profiles, indicating that they have potential as optical limiters. The second-order hyperpolarizability (Y), and third-order nonlinear susceptibility (/m[/(3)]) values are also reported for these dyes. The optical limiting values of one of the BODIPY dyes in solution, and two of the BODIPY-embedded PBC films, were below the maximum threshold of 0.95 J-cm-2. The effect of addition of substituents on the electronic structure of the BODIPY dyes was investigated using TD-DFT calculations. The calculated trends closely followed those determined experimentally.
- Full Text:
- Date Issued: 2018
- Authors: Harris, Jessica
- Date: 2018
- Subjects: Photosensitizing compounds , Active oxygen -- Physiological effect , Photochemotherapy , Cancer -- Treatment , Nonlinear optics , BODIPY (Boron-dipyrromethene)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/58002 , vital:27014
- Description: A series of structurally related BODIPY dyes were synthesised and characterised. Their photophysical properties were studied in order to determine whether they would be suitable candidates for use as photosensitisers in the photodynamic therapy (PDT) treatment of cancer. The synthesis of two highly fluorescent BODIPY cores was achieved via the acid-catalysed condensation of a pyrrole and a functionalised aldehyde. In order to promote intersystem crossing, and hence improve the singlet oxygen generation of these dyes, bromine atoms were added at the 2,6-positions of the BODIPY core. These dibrominated analogues showed good singlet oxygen quantum yields, and excellent photostability in ethanol. In order to red-shift the main spectral bands of the BODIPY dyes towards the therapeutic window, vinyl/ styryl groups were introduced at the 3-, 5-, and 7-positions via a modified Knoevengal condensation reaction. The addition of vinyl/ styryl groups to the BODIPY core caused an increase in fluorescence quantum yield as well as a decrease in singlet oxygen quantum yield with respect to the dibrominated analogues. However, two of the red-shifted BODIPY dyes still showed moderate singlet oxygen quantum yields. The use of BODIPY dyes in nonlinear optics (NLO) was explored. The nonlinear optical characterisations and optical limiting properties of a series of 3,5-dithienylenevinylene BODIPY dyes were studied, both in dimethylformamide (DMF) solution and when embedded in poly(bisphenol A carbonate) (PBC) as thin films. The 3,5-dithienylenevinylene BODIPY dyes showed typical nonlinear absorption behaviour, with reverse saturable absorption (RSA) profiles, indicating that they have potential as optical limiters. The second-order hyperpolarizability (Y), and third-order nonlinear susceptibility (/m[/(3)]) values are also reported for these dyes. The optical limiting values of one of the BODIPY dyes in solution, and two of the BODIPY-embedded PBC films, were below the maximum threshold of 0.95 J-cm-2. The effect of addition of substituents on the electronic structure of the BODIPY dyes was investigated using TD-DFT calculations. The calculated trends closely followed those determined experimentally.
- Full Text:
- Date Issued: 2018
Characterisation of surfaces modified with phthalocyanines through click chemistry for applications in electrochemical sensing
- O'Donoghue, Charles St John Nqwabuko
- Authors: O'Donoghue, Charles St John Nqwabuko
- Date: 2018
- Subjects: Electrodes, Carbon , Phthalocyanines , X-ray photoelectron spectroscopy , Electrochemistry , Electrochemical sensors , Hydrazine , Click chemistry
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/58046 , vital:27038
- Description: One form of surface modification was primarily investigated in this work on glassy carbon electrodes. The form of modification is comprised of a series of steps in which electrografting is first applied to the glassy carbon surface, which is then followed up with click chemistry to ultimately immobilise a phthalocyanine onto the surface. The modified glassy carbon electrodes and surfaces were characterised with a combination of scanning electrochemical microscopy, X-ray photoelectron spectroscopy and various electrochemical methods. In this work, three alkyne substituted phthalocyanines were used. Two novel phthalocyanines, with nickel and cobalt metal centres, were studied alongside a manganese phthalocyanine reported in literature. Each of the three phthalocyanines was modified at the peripheral position with a 1-hexyne group, via a glycosidic bond, yielding the terminal alkyne groups that were used for subsequent click reactions. In situ diazotisation was used to graft 4-azidoaniline groups to the surface of the glassy carbon electrode. The azide bearing 4- azidoaniline groups were thus used to anchor the tetra substituted phthalocyanines to the surface of the electrodes. This method yielded successful modification of the electrodes and lead to their application in sensing studies. The modified electrodes were primarily used to catalyse the common agricultural oxidising agent hydrazine.
- Full Text:
- Date Issued: 2018
- Authors: O'Donoghue, Charles St John Nqwabuko
- Date: 2018
- Subjects: Electrodes, Carbon , Phthalocyanines , X-ray photoelectron spectroscopy , Electrochemistry , Electrochemical sensors , Hydrazine , Click chemistry
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/58046 , vital:27038
- Description: One form of surface modification was primarily investigated in this work on glassy carbon electrodes. The form of modification is comprised of a series of steps in which electrografting is first applied to the glassy carbon surface, which is then followed up with click chemistry to ultimately immobilise a phthalocyanine onto the surface. The modified glassy carbon electrodes and surfaces were characterised with a combination of scanning electrochemical microscopy, X-ray photoelectron spectroscopy and various electrochemical methods. In this work, three alkyne substituted phthalocyanines were used. Two novel phthalocyanines, with nickel and cobalt metal centres, were studied alongside a manganese phthalocyanine reported in literature. Each of the three phthalocyanines was modified at the peripheral position with a 1-hexyne group, via a glycosidic bond, yielding the terminal alkyne groups that were used for subsequent click reactions. In situ diazotisation was used to graft 4-azidoaniline groups to the surface of the glassy carbon electrode. The azide bearing 4- azidoaniline groups were thus used to anchor the tetra substituted phthalocyanines to the surface of the electrodes. This method yielded successful modification of the electrodes and lead to their application in sensing studies. The modified electrodes were primarily used to catalyse the common agricultural oxidising agent hydrazine.
- Full Text:
- Date Issued: 2018